New Products - Bolt Supply House

Transcript

M or“Professionals e T han J usserving t N uts and Bo lts ! Professionals” NE W P RO D U CT S Catalogue Supplement 3Q14 INDEX... Dentec Safety Specialists Inc..................................................................................... Pages 3, 12 Durham Manufacturing Co................................................................................................. Page 4 A. Richard Limited . ........................................................................................................... Page 4 Bessey Tools, Ltd............................................................................................................... Page 4 Garant............................................................................................................................ Pages 5-7 Markal................................................................................................................................. Page 7 Ucan Fastening Products................................................................................................... Page 7 United Abrasives Canada Inc............................................................................................. Page 8 Excalibur Products Ltd....................................................................................................... Page 8 Makita Canada Inc...................................................................................................... Pages 9-12 WD-40 Products Ltd......................................................................................................... Page 12 Milwaukee Electric Tool............................................................................................. Pages 13-16 Honeywell Safety Products.............................................................................................. Page 16 More Than Just Nuts and Bolts! “Professionals serving Professionals” Calgary (South), Alberta - Ph. (403) 287-0360 Fax (403) 287-3127 Ft. McMurray, Alberta - Ph. (780) 799-4580 Fax (780) 799-4582 Calgary (North), Alberta - Ph. (403) 250-2658 Fax (403) 250-2677 Red Deer, Alberta - Ph. (403) 346-9393 Fax (403) 309-3373 Calgary (Foothills), Alberta - Ph. (403) 236-9000 Fax (403) 236-9006 Saskatoon, Saskatchewan - Ph. (306) 931-1960 Fax (306) 933-3139 Edmonton (North), Alberta - Ph. (780) 451-1220 Fax (780) 455-0237 Regina, Saskatchewan - Ph. (306) 721-5877 Fax (306) 721-5833 Edmonton (South), Alberta - Ph. (780) 435-2747 Fax (780) 435-2847 Prince Albert, Saskatchewan - Ph. (306) 922-3680 Fax (306) 922-3683 Lethbridge, Alberta - Ph. (403) 328-8880 Fax (403) 328-8898 Winnipeg, Manitoba - Ph. (204) 694-2658 Fax (204) 694-5485 Medicine Hat, Alberta - Ph. (403) 527-7717 Fax (403) 527-0722 Page 2 www.boltsupply.com What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals” DENTEC SAFETY SPECIALISTS INC. Liberty® 4 Point Suspension CSA Z94.1-05, Type 1, Class C, E and G certified Cap Style • • • • • • • • • • • • • • 4-Point woven nylon suspension Features a short peak and low profile Functional rain trough Accessory slots accommodate a wide variety of eye, face and hearing products Accommodates chin strap Goggle retaining slots on suspension Moisture wicking brow pad is removable, washable & replaceable Cascading ridge design to deflect falling objects away from worker. Certified when headband is installed in reverse position. “Easy Quick Slide-Lock” Cap weight: 347 gm (12.2 oz). Mega Ratchet Cap weight: 370 gm (13.1 oz). 12 per carton. Custom Logo imprinting available. Part No. Description 79621W Liberty CSA Type 1, 4 Pt. 79622Y Liberty CSA Type 1, 4 Pt. 79623OR Liberty CSA Type 1, 4 Pt. 79624R Liberty CSA Type 1, 4 Pt. 79626B Liberty CSA Type 1, 4 Pt. 79627GRY Liberty CSA Type 1, 4 Pt. 79628G Liberty CSA Type 1, 4 Pt. 79601DB Liberty CSA Type 1, 4 Pt. 79620HVL Liberty CSA Type 1, 4 Pt. 79629HVP Liberty CSA Type 1, 4 Pt. 79602BLK Liberty CSA Type 1, 4 Pt. 79635HVO Liberty CSA Type 1, 4 Pt. Mega Ratchet® The “Secure-Fit” ratchet features an easy turn knob that allows size adjustment without removing the helmet. Each turn of the ratchet knob automatically locks with 50 meshing teeth securing the position. The no-slip hold maintains the desired fit even in the most physically active jobs or extreme weather conditions. The hinged ratchet fits low on the nape of neck and is height-adjustable for a perfect fit. The ratchet mechanism is cushioned with a thick sponge padding for longlasting comfort. Head Protection Features Mega Ratchet Suspension, White • Moisture Wicking Brow Pad is removable, washable & Mega Ratchet Suspension, Yellow replaceable • Wide 3/4” woven ribbon is Mega Ratchet Suspension, Orange used for comfort and protection • Cap Accessory Slots Mega Ratchet Suspension, Red accommodate a variety of eye, face & hearing products (cap Mega Ratchet Suspension, Blue styles only) • Chin Strap Retaining Slots Mega Ratchet Suspension, Grey • Goggle Retaining Slots Mega Ratchet Suspension, Dark Green • Inner side of ratchet is covered in a cushioning foam pad. Mega Ratchet Suspension, Dark Blue • The nape section of the Mega Ratchet® suspension is attached Mega Ratchet Suspension, Hi-Vis Lime by two plastic pins which are repositionable to accommodate Mega Ratchet Suspension, Hi-Vis Pink a wide variety of head shapes. • Mega Ratchet® Suspension Mega Ratchet Suspension, Hi-Vis Orange features an easy turn knob that adjusts from head sizes 6 Mega Ratchet Suspension, Black 1/2 - 8. 79644BGE Liberty CSA Type 1, 4 Pt. Mega Ratchet Suspension, Beige Part No. Slide-Lock The Slide-Lock suspension easily adjusts to over 40 different head sizes between sizes 6 1/2 8. The material of the suspension is specially formulated for pliable comfort and strength as well to provide a smooth friction-free sliding action. The moisture wicking brow pad is removable, washable and replaceable. Description 79821W LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN WHITE 79822Y LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN YELLOW 79823OR LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN ORANGE 79824R LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN RED 79826B LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN BLUE 79827GRY LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN GREY 79828G LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN GREEN 79829BLK LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN BLACK 79801DB LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN DK BLU 79844BEI LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSPEN BEIGE 79820HVL LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSP HIVIZLIM 79830HVP LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSP HIVIZPNK 79835HVO LIBERTY CSA TYPE 1, 4PT SLIDE-LOCK SUSP HIVIZ OR What’s New at The Bolt Supply House Ltd. www.boltsupply.com “Professionals Serving Professionals” Page 3 THE DURHAM MANUFACTURING CO DURHAM® 12” Deep Sloped Parts Bins Weight 44 lbs | 20 kgs Bins 24 Dimensions Bins 5 3/8” x 11 7/8” x 5 1/2” = 137mm x 302mm x 180 mm Material Prime cold rolled steel Interlocking and Welded Construction Colors Durable gray powder coat finish Depth 12 in | 304 mm Height 23 7/8 in | 606 mm Width 33 3/4 in | 857 mm Part No. Description DURH356 24 OPENING METAL BIN (24B) A. RICHARD LIMITED Angular Paint Brush Pro platinum series. Polyester filaments, wood handle. Part No. Description RICH80871 1 1/2’’ ANGULAR PAINT BRUSH, PRO PLATINUM SERIES, POL RICH80872 2’’ ANGULAR PAINT BRUSH, PRO PLATINUM SERIES, POL RICH80874 3’’ ANGULAR PAINT BRUSH, PRO PLATINUM SERIES, POL RICH80871 RICH80872 RICH80874 BESSEY TOOLS, LTD. BESSEY All Steel Clamps Sliding Arm “F” Style Bar Clamps (Regular Duty SQ) • Heavy duty pad. • Forged sliding arm is made from tempered. Drop-forged steel for long service life. • High-strength electro-galvanized sliding pin T-handle – rounded ends for comfort, size engineered to load capacity. • Ergonomic grip is available as an accessory. • Heat treated, high carbon Acme threaded screw – tempered and quenched to give greater load capacity with longer service life. Spatter resistant. Part No. Description BESSSQ16 CLAMP, WELDING, F-STYLE, HEAVY DUTY PAD, CLAMPING CAPACITY 16 INCH, THROAT DEPTH 5-1/2 BESSSQ24 CLAMP, WELDING, F-STYLE, HEAVY DUTY PAD, CLAMPING CAPACITY 24 INCH, THROAT DEPTH 5-1/2 “Serving Your Industry Since 1948” Page 4 www.boltsupply.com What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals” garant Round point shovel, hollow back, lh Square point shovel #6 , hardwood hdle, dh Round point shovel, hollow back tempered steel blade, forward turned steps, hardwood handle. Perfect for digging holes, transporting earth, planting trees and shrubs, and digging up roots. Square point shovel, hollow back tempered steel blade, size #6, hardwood handle. Ideal for transporting small quantities of earth, sand, top soil, dirt, and other bulk materials. Part No. Description GAR02141 ROUND POINT SHOVEL, HOLLOW BACK, LH Round point shovel, hollow back, dh Part No. Description GAR02146 SQUARE POINT SHOVEL #6 , HARD WOOD HDLE, DH Square point shovel, hollow back, dh Square point shovel, hollow back tempered steel blade, forward turned steps, hardwood handle. Ideal for transporting small quantities of earth, sand, top soil, dirt, and other bulk materials. Round point shovel, hollow back tempered steel blade, forward turned steps, hardwood handle. Ideal for digging holes, planting trees and shrubs, digging up roots, and dividing perennials. Part No. Description GAR02142 ROUND POINT SHOVEL, HOLLOW BACK, DH Square point shovel, hollow back, lh Square point shovel, hollow back tempered steel blade, forward turned steps, hardwood handle. Great for transporting large quantities of earth, sand, and other bulk materials. Part No. Description GAR02143 SQUARE POINT SHOVEL, HOLLOW BACK, LH “Serving Your Industry Since 1948” What’s New at The Bolt Supply House Ltd. Part No. Description GAR02144 SQUARE POINT SHOVEL, HOLLOW BACK, DH Round point shovel, super socket, ash handle, dh, Garant Pro Industrial-grade round point shovel, hollow back tempered steel blade with a 5 in. extended socket (providing an overall socket length of 16 in.) : more wood and more steel for maximum power and durability, forward-turned foot steps, 28 in. premium varnished ash long handle, industrial double rivet assembly for more strength and a sturdy steel grip. Perfect for heavy-duty jobs. Limited lifetime warranty. Part No. Description GARGHR2FD35SS SUPERSOCKET RND POINT SHOVEL, D-HANDLE Round point shovel, super socket, ash handle, lh, Garant Pro Industrial-grade round point shovel, hollow back tempered steel blade with a 5 in. extended socket (providing an overall socket length of 16 in.) : more wood and more steel for maximum power and durability, forward-turned foot steps, 28 in. premium varnished ash long handle, industrial double rivet assembly for more strength and a sturdy steel grip. Perfect for heavy-duty jobs. Limited lifetime warranty. Part No. Description GARGHR2FLSS SUPERSOCKET RND POINT SHOVEL, LONG HANDLE www.boltsupply.com “Professionals Serving Professionals” Page 5 garant Concrete mover 20”, ash handle, Garant Pro Series Pro Series Steel floor scraper blade, 14” Concrete mover 20 inches with hook to position rebar. Premium varnished ash handle. Steel floor scraper replacement blade, 14 in. Description GARGPFSB14 14” STEEL FLOOR SCRAPER BLADE Pro Series Steel floor scraper blade, 22” Part No. Description GARGPCS20 CONCRETE MOVER 20” AH HANDLE Steel floor scraper replacement blade. 22 in. Floor scraper, 9”, long handle, Garant Pro Series Industrial-grade floor scraper, 9 inches. Flexible steel blade and 54 inches premium varnished ash handle. Perfect for cleaning or tile removal, or for general construction. Limited lifetime warranty. Part No. Description GARGPFS09 9” SCRAPER 54” HANDLE Floor scraper 14”, long handle, Garant Pro Series Floor scraper, 14 inches flexible steel blade and 54 inches premium varnished ash handle. Perfect for cleaning or tile removal, or for general construction. Limited lifetime warranty. Part No. Description GARGPFS14 FLOOR SCRAPER 14” PRO SERIES Floor scraper 22”, long handle, Garant Pro Series Floor scraper, 22 inches flexible steel blade and 54 inches premium varnished ash handle. Perfect for cleaning or tile removal, or for general construction. Limited lifetime warranty. Part No. Description GARGPFS22 FLOOR SCRAPER 22” PRO SERIES Page 6 Part No. www.boltsupply.com Part No. Description GARGPFSB22 22” STEEL FLOOR SCRAPER BLADE Round point shovel, forward steps, fg hdle, dh, Garant Pro Series Industrial grade round point shovel. Heavy-gauge tempered steel blade with extra-wide forward-turned footsteps for secure footing and maximum power. Ultra-sturdy engineering material handle composed of a fiberglass core overmolded with TPE for more control and comfort. One-piece D-grip for maximum sturdiness. Double-rivet assembly. Perfect for digging holes, planting trees and shrubs, digging up roots, and dividing perennials. Limited lifetime warranty. Part No. Description GARGPHR2FDS ROUND POINT SHOVEL, FOWARD, FIBERGLASS D-HDL Round point shovel, forward steps, fg hdle, lh, Garant Pro Series Industrial grade round point shovel. Heavy-gauge tempered steel blade with extra-wide forward-turned footsteps for secure footing and maximum power. Ultra-sturdy engineering material long handle composed of a fiberglass core overmolded with TPE for more control and comfort. Double-rivet assembly. Perfect for digging holes, planting trees and shrubs, digging up roots, and dividing perennials. Limited lifetime warranty. Part No. Description GARGPHR2FLS ROUND POINT SHOVEL, FOWARD, FIBERGLASS LONG What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals” garant Tamper 10” x 10”, fiberglass handle, Garant Pro Series Industrial grade tamper. 10 in. x 10 in. forged steel head, 48-in. ultra-sturdy fiberglass handle. Perfect to pack and level soil, asphalt and gravel. Used for demanding jobs. Limited lifetime warranty. Part No. Description GARGPT1448 10”X10” TAMPER FIBERGLASS 48” HANDLE Pro Series 30” Demolition bar Ultra sturdy forged steel demolition bar, 30in. Perfect for heavyduty work requiring maximum power. Oversized and well-oriented striking surface for easy penetration with precision and safety. Its wide curved end gives a continuous pivot point for maximum leverage while pulling. 3 nail slots for removing nails in different working positions. Its H-Shaped handle allows for better control and maximum sturdiness. Part No. Description GARGPWB30 30” DEMOLITION BAR Pro Series 36” Demolition bar Ultra sturdy forged steel demolition bar, 36in. Perfect for heavyduty work requiring maximum power. Oversized and well-oriented striking surface for easy penetration with precision and safety. Its wide curved end gives a continuous pivot point for maximum leverage while pulling. 2 nail slots for removing nails in different working positions. Its H-Shaped handle allows for better control and maximum sturdiness. Part No. Description GARGPWB36 36” DEMOLITION BAR Markal DURA-INK® 55 For flexible, finer line marking, the DURA-INK 55 features a medium chisel tip to produce both fine and broad permanent marks. This economical, durable plastic barrel withstands tough industrial uses and is the alternative to the high-cost metal barrels. Part No. Description DIM55BLK DURA INK 55 PERMANENT INK BLACK DIM55R DURA INK 55 PERMANENT INK RED UCAN CARBIDE TIPPED “TEARDROP” GLASS BITS •U  CAN Carbide tipped “Teardrop” Glass Bits, drill into glass and mirrors with little effort. • Used in conjunction with a lubricant, such as water, these bits produce round holes without chipping or breaking the glass. • Size range 1/8” - 1/2” • Convenient ”Contractor-Paks” What’s New at The Bolt Supply House Ltd. UCAN FASTENING PRODUCTS Part No. Description GTB12 1/2” GLASS AND TILE BIT GTB14 1/4” GLASS AND TILE BIT GTB18 1/8” GLASS AND TILE BIT GTB316 3/16” GLASS AND TILE BIT GTB38 3/8” GLASS AND TILE BIT GTB516 5/16” GLASS AND TILE BIT www.boltsupply.com “Professionals Serving Professionals” Page 7 UNITED ABRASIVES CANADA INC. Ovation Attacker (High Density on Fiberglas Backing Plate) • Excellent on irregular surfaces, allows the use of light pressure, and provides aggressive cutting action • Premium zirconium grain on a cotton backing providing a softeracting and faster cutting disc • Will not contaminate stainless steel For use on Stainless, Metal, and Aluminum Part No. Description SAIT76206 OVATION ATTACKER 4.5X7/8 Z40X SAIT76209 OVATION ATTACKER 4.5X7/8 Z80X SAIT76211 OVATION ATTACKER 4.5X7/8 Z120X SAIT76226 OVATION ATTACKER 5X7/8 Z40X SAIT76228 OVATION ATTACKER 5X7/8 Z60X SAIT76229 OVATION ATTACKER 5X7/8 Z80X SAIT76231 OVATION ATTACKER 5X7/8 Z120X The Ultimate CutTM High Performance Premium Stearate Aluminum .045" Cutting Wheel Oxide (4S) • Premium aluminum oxide • Best in Class - cutting Sta • Stearate coating and open coat structure • Exceptional cutting perfo lubricates and prevents loading • Long lasting performance and fast removal on Metal & Aluminum rates for fine finishing of automotive body works and wood finishing • Use dry only • Available in C-weight - medium weight, low flexibility For use on Wood & Metal SAIT22380 4-1/2 x .045 x 7/8 Typ SAIT22385 5 x .045 x 7/8 Type SAIT22390 6 x .045 x 7/8 Type Part No. Description SAIT84283 4S 9 X 11 PAPER SHEETS 80X SAIT84284 4S 9 X 11 PAPER SHEETS A24T100X SAIT84285 Grinding 4S 9 X 11 PAPER SHEETS 120X SAIT84286 4S 9 X 11 PAPER SHEETS 150X • Hard bond designed SAIT84287 SAIT84288 Wheel for edge & bevel grinding 4S 9 X 11 PAPER SHEETS 180X • Longer life for fewer whe 4S 9 X 11 PAPER SHEETS 220X SAIT84289 changes on Metal 4S 9 X 11 PAPER SHEETS 240X Ovation Ceramic SAIT84290 SAIT20065 4S 9 X 11 PAPER SHEETS 320X (High Density on Fiberglass Backing Plate) • High Performance / High Productivity • Premium ceramic grain on a durable polyester-cotton backing provides high stock removal and extra long life • Will not contaminate stainless steel For use on Metal and Stainless SAIT84291 Part No. Description SAIT78267 OVATION CERAMIC 5 X 7/8 36X SAIT78268 OVATION CERAMIC 5 X 7/8 40X SAIT78269 OVATION CERAMIC 5 X 7/8 60X SAIT78270 OVATION CERAMIC 5 X 7/8 80X SAIT84292 SAIT84293 SAIT20075 4S 9 X 11 PAPER SHEETS 400X SAIT20280 4S 9 X 11 PAPER SHEETS 500X SAIT20285 4S 9 X 11 PAPER SHEETS 600X 100% POLYESTER WICKING MATERIAL Meets WCB PPE-2 standard and CSA Z96-2 Class 2 Level 2 standard Sizes M-XL ETV3003 E-TV3003 TRAFFIC T-SHIRT YELLOW W/ POCKET Page 8 www.boltsupply.com 6 x 1/4 x 7/8 7 x 1/4 x 7/8 Encore Traffic T-Shirt Description 5 x 1/4 x 7/8 “Serving Your Industry Regular Density Type 29 Flap Disc Since 1948” • Grind, blend & finish with o EXCALIBUR PRODUCTS LTD. Part No. 4-1/2 x 1/4 x 7/8 • For use on Metal, Stainless & SAIT79106 4-1/2 x 7/8 x 40 G SAIT79108 4-1/2 x 7/8 x 60 G SAIT79109 4-1/2 x 7/8 x 80 G SAIT79126 5 x 7/8 x 40 Grit SAIT79128 5 x 7/8 x 60 Grit 5 x 7/8 x 80 Grit SAIT79129 What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals” MAKITA CANADA INC. 10” Table Saw With Stand Enhanced Safety Features For Improved Operator Safety • NEW Quick Release Blade Guard is easily accessible and provides clear line of sight to blade • Adjustable Riving Knife prevents material pinching behind blade eliminating risk of material kickback • Electric Brake for operator safety • Aluminum Diecast Precision Machined Table remains flat and true for out of the box accuracy • Smooth Operating Guide Rail with larger Locking Lever and Lock Mechanism for quick and easy setup • Large cutting capacity (3-9/16” at 90° and 2-1/2” at 45°) allows cutting 4x material in a single pass • Bevel Capacity of -0.5o to 45.5o • Maximum 25” Rip Capacity • Large On/Off Paddle Switch for easy access during operation. • Includes Table Saw Stand for easy transport and jobsite portability STANDARD EQUIPMENT INCLUDES: 10” C.T. Blade 32T, Push Stick, Wrench 19, Wrench 13-22, Hex Wrench 5, Adaptor Ring 1” x 5/8”, Angle Rule, Ruler Assembly, Center Cover, Table Saw Stand. SPECIFICATIONS • Blade Diameter: 10” (255 mm) • Arbor: 5/8” (15.88 mm) • Maximum Cutting Capacities: 90° 3-9/16” (91 mm) 45° 2-1/2” (63 mm) • Maximum Dado Capacity: 6” (152 mm) x 13/16” (21 mm) • No Load Speed 4,800 RPM • AMPS (120V) 15.0 A • Vibration Level: (Unavailable) • Noise Level: (Unavailable) • Table Size: (LxW) 26-3/4”x301/4” (678mm x 766mm) • Net Weight: 65.5 lbss (29.7 kg) Part No. Description MAK2705X1 TABLE SAW 10” W/STAND 4-3/8” Masonry Saw Dry Cutting Masonry Saw For Stone, Masonry, Tile, Concrete And More • Wide Blade Case enables use of Curved Diamond Wheel • Heavy Duty Aluminum Gear Housing for increased durability • 14 ga Steel Baseplate ensures accuracy and durability • Leading Edge of Baseplate indicates precise line of cut • Dust Proof Switch and Labyrinth Construction prevents contamination of motor • Flat Motor Housing allows tool to stand upright when changing blades • Bevel Capacity of 45° INCLUDES: 4” Turbo Rim Diamond Blade, 4-3/8” Curved Diamond Blade, Wrench 22, Hex. Wrench 5. • Blade Diameter: Max. 5” (120 mm) • Arbor: 3/4” (20mm) • Maximum Cutting Capacities: 0° 1-1/4” (32.5 mm) 45° 7/8” (21.5 mm) • No Load Speed: 12,000 RPM • Amps (120V): 10.0 A • Vibration Level: (Unavailable) • Noise Level: (Unavailable) • Overall Length: 9-3/8” (238 mm) • Net Weight: 6.4 lbs (2.9 kg) Part No. Description MAK4100NH2ZX1 MASONRY CIR SAW 4-3/8” W/4”+4- 3/8” DIAM WHEELS What’s New at The Bolt Supply House Ltd. 8-1/4 “ Circular Saw High Performance Magnesium Blade Case And Base • Electric Brake for operator safety • Dual LED Job Lights illuminate cut line • Blower feature keeps cutting line free of sawdust • Bevel Capacity of 50° with Positive Stops at 22.5°, 45°, and 50° • Ergonomic Soft Rubber Grip design for vibration absorption and comfortable operation INCLUDES: 8-1/4” C.T. Blade 24T, Hex Wrench 6, Guide Rule. SPECIFICATIONS • Blade Diameter: 8-1/4” (210 mm) • Arbor: 5/8” (15.88 mm) • Maximum Cutting Capacities: 0° 3” (75.5 mm) 45° 2-1/4” (57 mm) 50° 2” (51.5 mm) • No Load Speed: 5,200 RPM • AMPS (120V): 15.0 A • Vibration Level: 3.0 m/s2 • Noise Level: 95 dB(A) • Overall Length: 13-1/8” (332 mm) • Net Weight: 11.2 lbs (5.1 kg) Part No. Description MAK5008MGA CIRCULAR SAW 8-1/4” W/ ELEC BRAKE/MAG BASE/CASE 3” X 24” Belt Sander Durable Design For Heavy Duty Applications • Extended Base allows flush sanding • Innovative Design for sanding flush to walls using nose and side of sander • Quick and Easy Belt Changes using Belt Tensioning Lever • Precision Belt Tracking Knob for easy adjustment of belt position • Extra Long Power Cord for easy maneuverability INCLUDES: 1 Ea. 3”x24” Abrasive Belt 80G, Dust Bag, Cork Rubber Plate, Carbon Plate. SPECIFICATIONS • Belt Size: 3” x 24” (76 mm x 610 mm) • Belt Speed: 1,300 ft./min. (396 m/min.) • AMPS(120V): 7.8 A • Vibration Level: 2.5 m/s2 • Noise Level: 91 dB(A) • Overall Length: 14” (355 mm) • Cord Length: 16.4 ft. (5 m) • Net Weight: 10.6 lbs (4.8 kg) Part No. Description MAK9924DB BELT SANDER 3” x 24” 2” Brad Nailer 18-Gauge Lightweight Brad Nailer • 360° exhaust system directs exhaust away from operator • Rubber grip for comfortable handling • Quick release nose enables fast and easy removal of jammed nails • Quick release, side loading magazine • Convenient Adjustable Belt Hook INCLUDES: Oil Supply, Safety Goggles, Plastic Carrying Case. SPECIFICATIONS • Operating Air Pressure: 60 - 115 PSIG • Nail Size: (18 ga) 5/8” - 2” (15 - 50 mm) • Nail Type: 18 ga Brad Nails • Magazine: Capacity 100 • Vibration Level: 2.5 m/s2 • Noise Level: 81 dB(A) • Dimensions: (L x W x H) 10-1/4” x 2-1/2” x 9-3/8” (260 mm x 64 mm x 237 mm) • Net Weight: 3.3 lbs (1.5 kg) Part No. Description MAKAF505 BRAD NAILER 2” 18G www.boltsupply.com “Professionals Serving Professionals” Page 9 MAKITA CANADA INC. 1-3/4” Coil Roofing Nailer 32 cc Chainsaw 15° Round Head Coil Roofing Nailer • Operates in Bump Fire mode • 6 depth nailing settings with adjustment knob • Convenient adjustable belt hook • One touch and easy to load magazine • Rubberized Grip for increased comfort during prolonged use • Easy to remove contact top to clear nail/debris jams INCLUDES: Safety Goggles, Oil Supply, Hex Wrench SPECIFICATIONS • Operating Air Pressure: 65 - 120 PSIG • Nail Size: 3/4 – 1-3/4” (19 - 45 mm) • Nail Type: 1/8” (3.0 mm) 15o Round Head • Magazine Capacity: 120 nails • Vibration Level: (Unavailable) • Noise Level: (Unavailable) • Dimensions: (L x W x H) 10-3/8” x 4-5/8” x 10-5/8” (265 mm x 117 mm x 269 mm) • Net Weight: 5.5 lbs (2.5 kg) 16” Bar • Touch & Stop Switch automatically returns switch to start position, eliminating carburetor flooding • Intelligent Ignition Coil controls stable idling, increases output power, protects against engine overrun and enables easier restarting • Toolless Chain Tension Adjustment for quick and easy adjustment on the jobsite • Throttle-Lock Start Position • External access holes allow easy carburetor adjustment • Primer pump for easy starting • Automatic Chain Oiler • Inertia Chain Brake INCLUDES: 16” Guide Bar, 16” Chain, Chain Cover 16”, Universal Wrench 13/16, Screwdriver, Spark Plug, Starter Rope. SPECIFICATIONS • Displacement: 32 cc. (1.95 cu.in.) • Chain Pitch / Gauge: 3/8” / . 050” • Maximum Engine Speed: 12,800 RPM • Power Rating: 1.35 kW / 1.8 H.P. • Vibration Level: 4.8 m/s2 • Noise Level: 102.6 dB(A) • Fuel / Oil mixture: 50:1 • Ignition: System Electronic • Fuel Tank Capacity: 400 ml • Oil Tank Capacity: 280 ml • Net Weight: Dry w/O/Bar/Chain 9.4 lbs. (4.2 kg) Part No. Description MAKAN453 COIL ROOFING NAILER 1-3/4” 24.5 Cc, 4 Stroke Blower Improved Fuel Tank Coating Is EPA Phase II And CARB III Compliant Air Speed 145 MPH, Max Air Volume 316 CFM • Exceeds Government Clean Air Emission Ratings • 4-Stroke, for low noise and low emission • Quick-start - low compression engine for easy starting • Auto decompression for easy starting • Easy access to spark plug and air filter • Light weight design INCLUDES: Long Nozzle, Round End Nozzle, Tool Kit, Starter Rope, Spark Plug. SPECIFICATIONS • Displacement: 24.5 cc • Max. Air Flow: 145 MPH • Max. Air Volume (End Of Nozzle): 316 CFM • Carburetor: All Position Diaphragm Type • Ignition System: Electronic • Fuel / Oil Mixture: Not Required • Tank Capacity: 520 ml • Noise Level: 67 dB(A) • Overall Length: 13-3/4” (350 mm) • Dry Weight: 9.9 lbs (4.5 kg) Part No. Description MAKBHX2500CA BLOWER 24.5cc HANDHELD GASOLINE 4 STROKE Page 10 www.boltsupply.com Part No. Description MAKEA3201S40B CHAINSAW GASOLINE 32cc 16” BAR+CHAIN INCL 14” Power Cutter (20 mm Arbor) Top Mount Decompression Valve Reduces Required Start Up Force by 70%. 14” Cutting Wheel. Compliant with CARB Tier 3, EPA Phase 2 and EU Stage 2 Regulations • NEW Scavenging Losses Rejection (SLR) Muffler recycles exhaust unburnt gas emissions for increased operational efficiency and cleaner emissions • Advanced 5 Stage Air Filtration System for cleaner operation and enhanced operational life • Large Air Intake for maximum engine cooling • Reversible Cutting Arm enables cutting disc to be side or centre mounted for optimal operational versatility in a variety of applications • Electronic Ignition with rev limiter • Always use with 2 Cycle Synthetic Oil INCLUDES: 14” Cutting Disk For Stone 20mm, Tool Kit, Water Attachment Kit SPECIFICATIONS • Displacement: 4.5 cu.in (73 cc) • Max. Power: 3.8 kW (5.1 H.P) • Fuel / Oil Mixture: 50:1 • Vibration Level: 6.2 m/s2 • Noise Level 100 dB(A) • Ignition System: Electronic • Fuel Tank Capacity: 1/3 Gal (1.1 L) • No Load Speed (Engine): 9,400 RPM • Max. Spindle Speed: 4,300 RPM • Arbor: 20 mm • Max. Cutting Depth: 4-13/16” (122 mm) • Dry Weight: 22.5 lbs (10.2 kg) Part No. Description MAKEK7301 POWER CUTTER SAW GAS 73cc 14” WHEEL What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals” MAKITA CANADA INC. 2” Centrifugal Water Pump •1  05’ Total head (Total height at sea level, to which water can be raised above original water level) • Electronic sensor shuts off engine if oil level is low • Self priming pump for easy operation • Meets EPA/CARB emission standards • Powered by Robin Engines, Engine model # EX15 INCLUDES: Tool Kit, Strainer, Starter Rope, Spark Plug SPECIFICATIONS • Suction / Discharge Diameter: 2” (50.8 mm) • Total Head: 105’ (32 m) • Suction Head: 26’ (8.0 m) • Max. Pumping Capacity: • Litres Per Minute: 520 LPM • Run Time (Per Tank, Full Load): 1.8 hrs • Maximum Power: 4.3 H.P. • Fuel Mix: No Fuel Mixing • 4-Stroke Oil: 10W-30 • Fuel Tank Capacity: 2.7 L • Dimensions: 18-1/2” x 13-1/2” x 15-3/4” 470 mm x 344 mm x 414 mm • Dry Weight: 54.9 lbs (24.9 kg) Part No. Description MAKEW220R WATER PUMP GAS 2.7 HP 2” CENTRIFUGAL 4 STROKE 3-1/4” Planer Lightweight Design For Easy Surface Planing • Base Plate Foot protects materials and blade from damage • Single Chamfering Groove enables quick and easy chamfering of corners • Depth Adjustment Knob with Click Stops for precision planing applications • Lock-On Button enables easy continuous operation and can be operated from left or right side • Ergonomic Soft Rubber Grip design for vibration absorption and comfortable operation INCLUDES: 2Set 3-1/4” Double Edged Mini Planer Blades, Blade Gauge Assembly, Socket Wrench 9, Guide Rule, Plastic Carrying Case. SPECIFICATIONS • Maximum Capacities: Planing Width 3-1/4” (82 mm) Planing Depth 0-3/32” (0 - 2.5 mm) Shiplapping: 0 - 11/32” (0 - 9 mm) • No Load Speed: 17,000 RPM • AMPS (120V): 6.5 A • Vibration Level: 2.5 m/s2 • Noise Level: 89 dB(A) • Overall Length: 11-1/4” (285 mm) • Net Weight: 5.7 lbs (2.6 kg) Part No. Description MAKKP0800KX PLANER 3-1/4” W/CARRY CASE AND SET OF BLADES 10” Compound Mitre Saw • • • • Electric Brake for increased operator safety 2 Stage Safety Switch for increased operator safety Bevel Capacity of 45° Left Mitre Capacity of 45° Left or 52° Right with Positive Stops at 0°, 15°, 22.5°, 30° and 45° • Pivoting Fence (Left Side) can be adjusted when bevel cutting or to support larger materials INCLUDES: 10” C.T. Blade 32T, Socket Wrench, Dust Bag, Vertical Vise, Triangle Rule, 2 Ea. Safety Switch Button, Sub Plate Assy. SPECIFICATIONS • Blade Diameter 10” (255 mm) • Arbor 5/8” (15.88 mm) • No Load Speed 4,600 RPM • AMPS (120V) 15.0 A • Vibration Level 2.5 m/s2 • Noise Level 91 dB(A) • Overall Dimensions (L xW x H): 20-7/8” (530mm) x 18-3/4” (476mm)x 21” (532mm) • Net Weight 27.3 lbs (12.4 kg) Part No. Description MAKLS1040 10” COMPOUND MITRE SAW 2.5 H.P. Air Compressor Oil Lubricated Low Noise At Only 79 dB • Oil lubricated for cooler operation and reduced noise • High output cast iron pump delivers maximum performance and operational life • Big BoreTM cylinder and piston feature high output at lower RPM with reduced heat buildup, less noise and longer operational life • Low amperage draw reduces incidents of tripped breakers and voltage drops that cause premature motor failure • Easy view oil gauge and large pressure gauges for quick identification • Air pressure regulator enables easy adjustment of line pressure • Features 2 quick connect air hose fittings • Finned discharge tube promotes safe and efficient cooling • Roll cage construction protect components from damage INCLUDES: 1/4” Quick Coupler, (10TT-8), Air Filter, Compressor Oil (0.3L) SPECIFICATIONS • Motor: 2.5 H.P. • Pump: Oil-Lubricated • Tank: 2 x 2.1 Gallon • Performance: (90 PSI) 4.2 CFM • Noise level: 79 dB(A) • AMPS: (120V) 12.3 A • Dimensions (L x W x H) 20-1/2” x 19-5/8” x 20-7/8” (520 mm x 497 mm x 530 mm) • Maximum Pressure 130 PSI • Net Weight 77.0 lbs (34.9 kg) Part No. Description MAKMAC2400 AIR COMPRESSOR 2.5 HP (OIL LUBE) (TWIN STACK) More Than Just Nuts and Bolts! “Professionals serving Professionals” What’s New at The Bolt Supply House Ltd. www.boltsupply.com “Professionals Serving Professionals” Page 11 MAKITA CANADA INC. Plate Joiner 16” Electric Chainsaw Lightweight And Compact Design With Enhanced Ergonomics For Maximum Maneuverability • Depth adjustment knob enables quick adjustment for #0, #10 and #20 biscuits • Rack-and-pinion angle guide enables precise adjustment of fence • Cast aluminum adjustable fence with positive stops at 0°, 45° and 90° • Non-marring rubber insert strip eliminates damage to materials INCLUDES: 4” CT Cutter Blade 6T, Angle Guide, Dust Bag, Lock Nut Wrench 20, Set Plate, Plastic Carrying Case SPECIFICATIONS • Blade Diameter 4” (100 mm) • Maximum Cutting Depth • No Load Speed 11,000 RPM • AMPS (120V) 5.6 A • Vibration Level 2.5 m/s2 • Noise Level 86 dB(A) • Overall Length 11-7/8” (302 mm) • Net Weight 5.6 lbs (2.5 kg) Electric Chain Brake 16” Bar • Tool-less blade change and adjustment • Easy operation and maintenance • Front and rear handles with rubberized soft grip for operator comfort and convenience • Automatic chain oiler • Features Soft Start • Current limiter protects motor from burn out INCLUDES: Chain, Guide Bar, Chain Cover, Hook Complete. SPECIFICATIONS • Guide Bar Length: 16” (400 mm) • Chain Pitch / Gauge: 3/8” / .050” • Chain Speed: 2600 FPM • Oil Tank 140 ml • AMPS (120V): 14.5 A • Vibration Level: 5.6 m/s2 • Noise Level: 90.8 dB(A) • Overall Length: 19-3/8” (492 mm) • Net Weight: 11.5 lbs (5.2 kg) Part No. Description Part No. Description MAKPJ7000 PLATE JOINER MAKUC4030A CHAINSAW ELEC 14.5A 16” BAR+CHAIN INCL WD-40 PRODUCTS LTD Machine & Engine Degreaser Foaming Spray Dirt & Dust Resistant Dry Lube PTFE Spray Makes equipment run smoother, last longer and look like new. Powerful stream sprays up to five feet. • Quickly removes grease, oil dirt and grime • Deep penetrating foaming action • Excellent soil removal score outperforms the competition • Ideal for use on auto and truck engines, tractors, forklifts, gears and chains, industrial machinery, farm and power equipment and other metal tools. Quick-drying PTFE formula provides superior lubrication and long-lasting corrosion protection with no oily residue. • PTFE formula is ideal for reducing friction and wear • Resists dirt, dust and oil • Ideal for releasing molded parts • Ideal for use on blades and bits, door and window tracks, slides, conveyor belts, rollers, chains, cables, hinges, power tools and equipment. Part No. Description Part No. Description WD1206 WD40 SPECIALIST FOAMING DEGREASER 510g WD1209 WD40 SPECIALIST DRY LUBE w/PTFE 283g DENTEC SAFETY SPECIALISTS INC. CS931DX™ PROTECTIVE EYEWEAR Lightweight comfort meets superior protection against airborne dust and debris. The 931 DX™ is lightweight comfort with superior protection from dust and debris. SPECIAL DESIGN FEATURES: • Removable Foam Carrier - Prevents eye injuries caused by airborne dust and debris. Simple removal for easy cleaning. Hypoallergenic foam. • Anti-Fog System - Combines high performance scratch-resistant anti-fog coating with vented foam for proper air flow. • Non-Slip Comfort - Rubberized temples provide a secure comfortable fit, even in hot and humid conditions. Part No. Description • Blocks Harmful UV - Polycarbonate lenses block 99.9% of harmful UVA and UVB rays. 93101DX SAFETY GLASSES CSA CLR • High-Impact Protection - Meets all ANSI Z87.1 requirements VENTED FOAM CARRIER including high impact. • *Can be used with any model CS931. Packaged 12 units per box: 93102DX SAFETY GLASSES CSA GRAY AF 93101DX - Clear lens, vented foam carrier, black rubberized temple. VENTED FOAM CARRIER 93102DX - Gray lens, vented foam carrier, black rubberized temple. Page 12 www.boltsupply.com What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals” MILWAUKEE ELECTRIC TOOL M12 FUEL™ HACKZALL® Recip Saw Features • One-handed design provides superior control & versatility over a standard recip saw • Compact size allows for cutting in tight spaces, and light weight makes overhead work easier • POWERSTATE™ Brushless Motor Supplies constant power for faster cuts and reduced heat for extended life • REDLINK PLUS™ Intelligence Provides optimized performance and overload protection using total system communication between tool, battery and charger • REDLITHIUM™ XC 4.0 Battery Pack Provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries Part No. Description MILW252020 M12 FUEL HACKZALL RECIP SAW TOOL ONLY MILW252021XC M12 FUEL HACKZALL RECIP SAW KIT M18 FUEL™ 1/2” Impact Wrench with Ball-Pin Features • Delivers a best-in-class 210 ft-lbs. and 2,520 in-lbs of torque in a compact design • The Milwaukee® POWERSTATE™ Brushless Motor provides increased efficiency, lasts longer and delivers maximum power • REDLINK PLUS™ Electronic Intelligence allows the operator to choose between 3 fastening modes with Milwaukee’s proprietary DRIVE CONTROL™ feature • Utilizes a ball-pin detent design for maximum socket retention Part No. Description MILW2655B20 M18 FUEL 1/2” IMPACT WRENCH - W/BALL - TOOL O M18 FUEL™ 2 Tool Combo Kit The M18 FUEL™ Cordless 2-Tool Combo Kit includes the M18 FUEL™ 1/2” Hammer Drill/Driver , M18 FUEL™ SAWZALL® Reciprocating Saw. M18 FUEL™ features a POWERSTATE™ Brushless Motor, REDLINK PLUS™ Electronic Intelligence and REDLITHIUM™ Battery Technology, this results in longer motor life, more run time and more power. The POWERSTATE™ brushless motor works harder and lives longer than all leading competitors, while reducing noise and cooling more rapidly to deliver years of maintenancefree performance. The Milwaukee REDLITHIUM™ XC4.0 Battery is the most durable pack on the market and provides up to 2X more run time than standard Lithium-Ion batteries. REDLINK PLUS™ Intelligence hardware and software is the world’s most advanced system of cordless power tool electronics that will maximize performance and protect the user’s investment. Step Drill Bit Set Features • JAM-FREE Performance: Dual-flute design provides greater speed and control • Up to 2X faster: Optimized for cordless drills in high speed • Rapid Strike™ Tip: Creates fast, accurate starts and generates less heat • Up to 4X longer bit life: Optimized geometry with Black Oxide coating to cut faster and produce less heat • Up to 50% more holes per battery charge: Greater user productivity • Laser-engraved reference marks: Easily stop on any hole size • 3-Flat Secure-Grip™ shanks: Reduces bit slippage in the chuck • Made in the USA MILW48899221 Part No. MILW48899223 MILW48899224 Description MILW48899221 3PC STEP BIT SET (#1, #2, #4) MILW48899223 4PC STEP BIT SET (#1, #4, #7, #12) MILW48899224 6PC STEP BIT SET (#1, #4, #6, #7, #8, #9) SHOCKWAVE™ 1/2” Deep Well Socket Set (9 PC) Features • Chromoly steel and custom heat treatment for maximum durability in high torque applications • Radius Corners: Drives on flats to reduce stripping and breakage • Thin wall construction for impact strength in tight clearance applications Milwaukee® SHOCKWAVE Impact Duty™ Sockets are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE Impact Duty™ Socket Adapters provide fastening capabilities with all impacts. Part No. Description MILW49664484 8PC 1/2” DRIVE DEEP WELL SET Bottle Opener Features • Wire Stripper - Up to 12ga • Chrome Plated Rust Protection • Hardened Steel for Durability • Cushion Grip Handle • Rear Cap ID Marking The Milwaukee® Bottle Opener is engineered for Heavy Duty use on and off the jobsite with a durable, hardened-steel head and integrated wire stripper. The bottle opener also features chrome-steel rust protection for use in moist and wet environments, the Milwaukee® cushion grip handle and rear cap marking for easy ID. Part No. Description Part No. Description MILW279422 M18 FUEL 2-TOOL COMBO KIT MILW48222000 BOTTLE OPENER/WIRE STRIPPER What’s New at The Bolt Supply House Ltd. www.boltsupply.com “Professionals Serving Professionals” Page 13 MILWAUKEE ELECTRIC TOOL 200’ Laser Distance Meter Features • Superior Design: Allows for easy measuring from edges and corners • 5 Measurement functions: length, area, volume, indirect measurement (Pythagoras), and stake-out • Simple Keypad and Interface • Memory storage of last 10 measurements Milwaukee’s Laser Distance Meter is a heavy duty distance measuring tool for professional, commercial and industrial applications. The 2281-20 can easily measure distance up to 200’ with 1/16” accuracy. The simple user interface makes Laser Distance Meter easy to use. The end bracket allows for accurate measuring from corners and edges. Easily add and subtract values and use five different functions to calculate length, area, volume, indirect measurements, and stake out equations. The 2281-20 includes meter case, two (2) AAA batteries, quick reference guide, manual and is covered by the Milwaukee 5-Year Warranty. Part No. Description MILW228120 LASER DISTANCE METER 260’ Laser Distance Meter Features • Superior Design: Allows for easy measuring from edges and corners • 7 Measurement functions: length, area, volume, indirect measurement (Pythagoras), and stake-out, timer and horizontal mode • Simple Keypad and Interface • Memory storage of last 20 measurements Milwaukee’s Laser Distance Meter is a heavy duty distance measuring tool for professional, commercial and industrial applications. The 2282-20 can easily measure distance up to 260’ with 1/16” accuracy. The simple user interface makes Laser Distance Meter easy to use. Smart Horizontal Mode provides the most accurate measurements by factoring in the angle the unit is being held. The end bracket allows for accurate measuring from corners and edges. Easily add and subtract values and use seven different functions to calculate length, area, volume, indirect measurements, stake out, timer and Smart Horizontal equations. The 2281-20 includes meter case, two (2) AAA batteries, quick reference guide, CD manual and is covered by the Milwaukee 5-Year Warranty. Part No. Description MILW228220 LASER DISTANCE METER DELUXE Thin Wall Hole Saw 3 PC set Features • 1/4” Quick Change Hex Shank for use with Impact Drivers • Thin Wall 8 TPI Design for 40% faster cuts than standard bi-metal hole saws • Stop shoulder design prevents over-drilling and damaging components • Ejection spring automatically removes slugs Designed with a robust ¼” quick change hex shank, Milwaukee® Shockwave Impact Duty™ Thin Wall Hole Saws give professionals a hole making solution to use with impact drivers. Utilizing a thin wall, 8 TPI design, Thin Wall Hole Saws deliver a burr-free cut up to 40% faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. Chose Thin Wall Hole Saws for use in plastics and thin gauge metals up to 1/8” thick. Part No. Description MILW49224800 3PC KIT THIN WALL HOLE SAW Page 14 www.boltsupply.com 10IN1 ECX™ Ratcheting Multi Bit Driver Features • All metal high torque ratchet delivers more durability and 2X driving speed • 3 1/2” Power Groove Bits for power tool compatibility • Revolver style bit storage and selection • Up to 10ga Wire Stripper and Loop Maker for additional jobsite functionality • Chrome Plated Bits - Marine Grade Rust Protection • Magnetic bit retention delivers consistent driving performance • Extended Reach Design Milwaukee® 10IN1 Ratcheting Multi-Bit Drivers feature 3-1/2” power groove bits for power tool compatibility and maximum jobsite versatility. The chrome plated bits provide Marine-Grade rust protection and reduce wear from the elements on the job. The all metal high torque ratchet allows for 2X faster driving without sacrificing control. Milwaukee 10IN1 Multi-Bit Drivers are designed for the jobsite and include Milwaukee’s Limited Lifetime Warranty. Part No. Description MILW48222301 10IN1 ECX RATCHETING MULTI BIT DRIVER M18 FUEL™ Deep Cut Band Saw Features • POWERSTATE™ Brushless Motor: Increased cutting speed and power through the toughest applications • CPT™ Constant Power Technology: Maintains cut speed in the toughest applications for optimal performance • Over 90% same parts as Milwaukee’s Corded Deep Cut Band Saw • Jobsite Armor Technology™: Proprietary composite material and crush zone barriers provide long lasting rugged protection • REDLINK PLUS™ Intelligence: The most advanced system of cordless power tool electronics. Provides optimized performance and overload protection using total system communication between tool, battery and charger • All metal direct drive: Delivers maximum tool life with all metal direct drive gearing system, while requiring less servicing than a chain drive • REDLITHIUM™ XC 4.0 Battery: Provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries • Tool-Free locking adjustable shoe: Button actuated tool-free design allows user to quickly adjust from an extended shoe to no shoe in seconds • Industry’s largest cut capacity: Versatility to cut up to 5 in. by 5 in. material in one pass and adjustable shoe allows for less tool rotation when cutting material above 5 in. • LED light: Illuminates work surface for increased accuracy and productivity Part No. Description MILW272920 M18 FUEL DEEP CUT BAND SAW - BARE MILW272921 M18 FUEL DEEP CUT BAND SAW - 1 BAT KIT MILW272922 M18 FUEL DEEP CUT BAND SAW - 2 BAT KIT What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals” Season V Hood MILWAUKEE ELECTRIC TOOL S-3X M18™ 15-Tool Combo Kit  3 Carbon Fiber Heating Elements V Hoodies Season  Distribute active3heat to core areaElements Carbon Fiberbody Heating Kit Contents Distribute active heat to core body 2607-20 M18 Compact Hammer Dr. area 2656-20 M18 ¼” Hex Impact Driver Waffle-Weave Thermal Lining  Waffle-Weave Thermal Lining thermal liner and rib-knit 2659-20 M18 ½” Imp Wrench Polyester 2663-20 M18 ½” HTIW w/Ring cuffs provide superiorcuffs heat retention  Polyester thermal liner and rib-knit 2615-20 M18 Right Angle Drill Washer and Dryer Safe Early season hoodie provide superior heat retention 2612-20 M18 5/8 SDS+ Rotary Hammer All models will be 100% machine 2620-20 M18 Sawzall washable and dryable Lighter layer ideal fo 2629-20 M18 Bandsaw Enlarged Internal Battery Pouch bow hunting 2630-20 M18 Circular Saw Fits M12™ and M18™ battery packs  Washer and Dryer Safe 2682-20 M18 Metal Saw and controllers  All models will be 100% machine 2680-20 M18 Grinder Size S-3X 2645-20 M18 Jig Saw Water Resistant washable and dryable 2626-20 M18 Multi Tool Part No. Description Realtree M 0884-20 M18 Blower 2735-20 M18 LED Work Light MILW2380 M12 BLACK HEATED HOODIE Max-1 ca (4) M18 REDLITHIUM 4.0 BATTERY PACKS  Enlarged Internal Battery Pouch 48-59-1806 M18 6 Pack Charger MILW2381 M12 BLACK HEATED HOODIE W/ BATTERY grasses, b  Fits M12™ and M18™ battery packs and S-3X (3) Contractor Bags S-3X S-3X S-3X S Hoodie 2382 controllers Part No. Description MILW269515 M18 15 PC COMBO KIT INCL 2607-20, 2656-20 Shockwave Impact Driver Bit Set (42-Piece) CAMO EXPANSIO Camo Xtra Heated Hoodie The Xtra in Realtree Xtra stands for extra effectiveness in the field. This new camo pattern blends perfectly year round in a variety of habitats. It blends best from the leaf change of fall through winter, The Xtra in Realtree Xtra stands for extra effectiveness then again inpattern early spring before green-out. blends perfectly year round in a variety of habit Realtree Max-1 camo lets hunters in broad terrain melt into their change fall through winter, thenofagain surroundings.leaf Max-1 camo of combines the perfect balance neutralin early sp earth tones, prairie grasses, brush, rock, sage and open zones. Size S-3XL *Realtree Product will b Milwaukee Shockwave Impact Duty Drill Bits and Driver Bits are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the Shockwave Impact Duty Driver Bits feature an innovatively designed geometric shock absorption zone to extend life. The forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. The Shockwave Impact Duty Hex Drive Drill Bits feature the Lighter Milwaukee Thunderbolt web for durability and chip removal paired areas w with taper-fit construction for a stronger bit with less wobble. The drill bits include a 135-degree split point to allow the bit to start on contact and eliminate walking. Broadly targeting cordless users, the Shockwave Impact Duty accessory line is not only ideal for heavy duty impact applications, but delivers a full system © Milwaukee Electric Tool Corp., 2010. Confidential Material. We solution for the entire user’s drilling and fastening needs. We reserve all rights of disposal such as copying or passing on to Lighter Layer. Pattern and design ideal • Geometric design provides the shock (Early season hoodie. Lighter Hoodie Jacket for geographic areas with brush (i.e. layer ideal for bow hunting.) absorption Southwest, Texas & Gulf Coast) 2382 2392 • Proprietary still and heat treat process for maximum strength and durability Part No. Early season Description hoodie. • Forged tips for maximum grip Standard jacket. Great for hunting Lighter layer ideal for MILW2382 M12 CAMO XTRA season HEATED HOODIE • Driving bits designed for quick change and recreational wear . bow hunting applications Hoodie 2384 Part No. Description MILW48324407 42PC SHOCKWAVE IMPACT DRIVER SET MILW48324430 20PC SHOCKWAVE SET MILW2383 M12 CAMO XTRA HEATED HOODIE W/ BATTERY Max-1MAX-1 camo HEATED lets hunters in broad terrain me MILW2384 Realtree M12 CAMO HOODIE Max-1 camo combines the perfect balance of neu MILW2385 grasses, M12 CAMO HEATED W/ brush,MAX-1 rock, sage and HOODIE open zones. BATTERY *Realtree MAX-1 Pattern: SPECIAL- B Product will be produced based on orders More Than Just Nuts and Bolts! “Professionals serving Professionals” Lighter Layer. Pattern and design ideal for geographic areas with brush (i.e. Southwest, Texas & Gulf Coast Hoodie © Milwaukee Electric Tool Corp., 2010. Confidential Material. We reserve all rights in the event of intellectual property ri 2384on to third parties. What’s New at The BoltWeSupply House Ltd. reserve all rights of disposal such as copyingwww.boltsupply.com or passing “Professionals Serving Professionals” Page 15 3 Settings MILWAUKEE ELECTRIC TOOL High, med, low for optimal comfort Season V 3 in 1 Hunting Jacket Season V Jackets 5 Carbon Fiber Heating Elements Design: New, improved cut and adjustable cuffs for enhanced range of > Distribute active heat to core body area and pockets motion and maximum retention of heat. 3 in 1 Design Washer/Dryer Safe: All models will be 100% machine washable and CAMO EXPANSION Items, 2 Camo Patterns > Heated vest with zip-in premium Patterns outer shell for ultimate versatility – 4dryable. NSION – 4 Items, 2 Camo Special Polyester Fabric Blend Insulation: Improved insulation minimizes weight while maximizing heat > Reduces sounds caused by movement retention. Removable HoodThe Xtra in Realtree Xtra stands for extra effectiveness in the field.Utility: Oversized cargo pouch and added utility pocket provides versatile This new camo tiveness in>the field. retain This new camo Helps heat andblends provides protection against the elements storage options. pattern perfectly year round in a variety of habitats. It blends best from the y of habitats. It blends the leaf change of fall through winter, then again in early spring before green-out. Size S-3X best from Performance: 5 durable carbon fiber heating elements to provide up to 6 early spring before green-out. hours of run time. 3 Settings: High, med, low for optimal comfort. Wind/Water Resistant: Internal storm2394 flap & thermal knit fleece inner lining. USB Charger: Charges portable electronic 2395devices. & fuel gauge displays remaining runtime. Size S- 3XL hunting ear . Wind/Water Resistant Internal storm flap & thermal knit fleece inner lining USB Charger 3 in 1 Jacket 2386 Charges portable electronic devices. & fuel gauge displays M12 3-IN-1 CAMO PREMIUM MULTIZONE Part No. HTD JACKET remaining runtime Standard jacket. Hoodie JacketGreat for hunting 3 in 1 Jacket, Premium season and recreational wear . 3 in 1 Jacket 2392 hunting jacket2382 with extreme 2386 versatility and utility. Early season hoodie. Standard jacket. Great for hunting hunting jacket Lighter layer ideal for season and recreational wear . Part Premium No. Description with bow extreme versatility hunting and utility MILW2386 Premium hunting jacket with extreme versatility and utility MILW2394 Realtree Max-1 camo lets hunters in broad terrain melt into their surroundings. rrain melt into their surroundings. Max-1 camo combines the perfect balance of neutral earth tones, prairie MILW2390 e of neutral MILW2387 earth tones, prairie grasses, brush, CAMO rock, sagePREMIUM and open zones. M12 3-IN-1 HTD M-ZONE MILW2390 Description 2392 2390 M12 RED PREMIUM MULTI ZONE HEATED 2393 2391 JACKET JACKET W/BATT © Milwaukee Electric Tool Corp., 2010. Confidential Material. We reserve all rights in thePREM event MULTI-ZONE of intellectual property MILW2391 M12 RED HEATEDrights. MILW2392 *Realtree M12 CAMO PREMIUM MULTI ZONE Pattern: SPECIALto on orders We reserve all rights MAX-1 of disposal such as copying orBuild passing to third parties. JACKET W/BATT HEATED JACKET AL- Build to orders Product will be produced based on orders in system by 5/15 MILW2394 M12 BLACK PREMIUM MULTI ZONE rders in MILW2393 system by 5/15 M12 CAMO PREMIUM MULTI ZONE HEATED JACKET HEATED JACKET W/BATT Lighter Layer. Pattern and design ideal for geographic areas with brush (i.e. Southwest, Texas & Gulf Coast) graphic ulf Coast) MILW2395 M12 BLACK PREMIUM MULTIZONE HEATED JACKET W/BATT Hoodie HONEYWELL SAFETY PRODUCTS Electric Tool Corp., 2010. Confidential Material. We reserve all rights in the event of intellectual property rights. 2384on to third parties. rights of disposal property rights. such as copying or passing 4 4 Uvex Protégé® Designed with proprietary Uvex® Floating Lens® technology, an expandable wrap-around brow, soft temple tip pads and nosepiece, the Uvex Protégé provides workers with exceptional comfort and flexible style. The Uvex Protégé delivers sport-styling, lightweight comfort and flexible design — all weighing less than an ounce. Comfort never felt so light. High Performance • Available with Uvex high-performance Uvextreme® anti-fog and Ultra-dura® anti-scratch lens coatings as well as a wide range of lens tints to address the needs of a variety of work environments. • Meets the ANSI Z87.1-2010 standard. • Certified to the requirements of the CSA Z94.3 standard. • Clear, Gray, Amber, Silver Mirror, and SCT-Reflect 50 tints meet Mil V0 ballistic test for impact (protection against impact energies 7x higher than ANSI requirements). • Lifetime frame guarantee. Superior Comfort & Fit • Proprietary Floating Lens® design offers increased flexibility in fit. • Secure wrap-around brow expands to fit a wide range of users. • Ultra lightweight design. At only 25 grams, it weighs less than one ounce. • Comfortable nosepiece with soft, flexible “fingers” conforms to a variety of facial profiles and minimizes slippage. Part No. • Nosepiece with soft, flexible “fingers” conforms to a variety of facial profiles and minimizes slippage for all-day comfort. UVEXS4200 • Soft temple tip pads cushion the delicate area behind the ears, providing a secure, comfortable fit. UVEXS4202 UVEXS4222XXC Page 16 www.boltsupply.com Clear — Ideal for most indoor work applications SCT-Reflect 50 — Light mirror coating is ideal for varying light conditions Amber — Ideal for low-light applications where enhanced contrast is needed Description PROTEGE BLACK CLEAR HC PROTEGE BLACK REF50 HC PROTEGE BLK AMBER XT EXTD What’s New at The Bolt Supply House Ltd. “Professionals Serving Professionals”