Transcript
SANUS RACKS
Component Series Racks FOR ALL YOUR AV GEAR / FULLY CUSTOMIZABLE
Table of Contents COMPONENT SERIES RACKS...................................................... 1 – 2 COMPONENT SERIES RACK PLUS BUNDLES....................................3
The Component Series AV racks were designed with high performance and structural integrity in mind. Heavy-gauge welded steel construction, swivel casters and height-adjustable feet ensure perfect leveling and stabilization on any surface. These solid racks come preassembled with shelves and blanking panels for the ultimate in convenience.
MODEL CFR2136
36U Component Rack
70.5" Tall AV Rack
COMPONENT SERIES STACKABLE SKELETON RACKS.....................4 SANUS ECOSYSTEM™................................................................. 5 – 6
Strong and sturdy construction with heavy-gauge welded steel
SANUS ECOSYSTEM™ BUNDLES.......................................................7
Customizable rack includes top and bottom cable slots with covers, front and rear adjustable depth threaded rack rails, and multiple 3U removable panels
RACK ACCESSORIES.................................................................... 8 – 9 EURO SERIES RACKS............................................................... 10 – 11 EURO SERIES RACK ACCESSORIES.................................................12
Removable, quick-release side and back panels allow for easy access to components Rack comes preassembled with shelves and blanking panels to simplify ordering and installation
SANUS Component Series Racks FULLY CUSTOMIZABLE AV RACKS SHIP COMPLETELY ASSEMBLED AND READY TO ROCK.
Lockable, tempered glass front door can be placed on left or right of rack for added flexibility during installation
PACKED TO PERFORM Product packaging has been perfected to keep our racks protected so that they’re in perfect condition and ready to perform upon delivery. • Expertly pallet banded for sound shipping
Convection cooling system allows warm air to escape through top as cooler air is drawn in through bottom of rack, keeping AV gear at the proper temperature
• 3-piece protective corrugate wrapping prevents damage • Rigid inner base pallet supports entire rack during transport so casters and feet can be safely pre-assembled • Sleeve design of box makes it easy to open and repack
ENGINEERED FOR GREATNESS Our racks put your installation and organization concerns at ease. • Single vent cutouts on top and bottom is easier than ever to remove • Increased hole patterns on top, bottom and back panels make for easy installation of 1U, 2U and 3U devices • Rearranged shelves and blanking panels create a sleek, completed look
DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 70.5" 60 x 60 x 179.07 cm DIMENSIONS (w x d x h) WITHOUT CASTERS 23.62" x 23.62" x 67.7" 60 x 60 x 171.96 cm
PRODUCT WEIGHT 177.7 lbs / 80.77 kg WEIGHT CAPACITY 800 lbs / 363.64 kg RACK SPACES 36U
PREASSEMBLED WITH: (2) 1U shelf, 30 lbs/ 13.6 kg. 15"/ 381 mm deep (6) 2U shelf, 50 lbs/ 22.7 kg. 18"/ 457 mm deep
PREASSEMBLED WITH: (2) 1U Blanking Panels (6) 2U Blanking Panels (3) Tie Bars INTERIOR USABLE SPACE (w x d) 19.4" x 21.60" 49.28 x 54.86 cm
MORE ON COMPONENT SERIES RACKS ON THE NEXT PAGE
COMPONENT SERIES RACKS SANUS COMPONENT SERIES RACK ACCESSORIES
281
Component Series Racks
Component Series Stackable Skeleton Racks
FOR ALL YOUR AV GEAR / FULLY CUSTOMIZABLE
1U SHELF
WALL MOUNTED OPTION / OPEN DESIGN
DIMENSIONS (w x d x h) 19" x 15" x 1.75" 48.26 x 38.1 x 4.45 cm
DIMENSIONS (w x d x h) 19" x 18.2" x 3.5" 48.26 x 46.2 x 8.89 cm
WEIGHT CAPACITY 30 lbs / 13.64 kg
WEIGHT CAPACITY 50 lbs / 22.73 kg
MODEL CFR2144
44U Component Rack
DIMENSIONS (w x d x h) WITHOUT CASTERS 23.62" x 23.62" x 81" 60 x 60 x 205.74 cm
27U Component Rack
PRODUCT WEIGHT 240 lbs / 109.09 kg WEIGHT CAPACITY 1000 lbs / 454.55 kg RACK SPACES 44U
PREASSEMBLED WITH: (2) 1U shelf, 30 lbs/ 13.6 kg 15"/ 381 mm deep (7) 2U shelf, 50 lbs/ 22.7 kg 18"/ 457 mm deep
20U Stackable Skeleton Rack
35" Tall AV Rack
PREASSEMBLED WITH: (2) 1U Blanking Panels (7) 2U Blanking Panels (3) Tie Bars
Modular, stackable structures can be coupled into five different height combinations: 40U, 35U, 30U, 20U, and 15U
INTERIOR USABLE SPACE (w x d) 19.4" x 21.60" 49.28 x 54.86 cm
Entire structure, complete with extra screws, levelling feet, removable shelves, blanking panels, wall mounting hardware, stacking kit, shelf straps and equiptment back stops ship in one UPS box
55" Tall AV Rack
DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 55" 60 x 60 x 139.7 cm DIMENSIONS (w x d x h) WITHOUT CASTERS 23.62" x 23.62" x 52.2" 60 x 60 x 132.59 cm MODEL CFR2115
MODEL CFR1620
85" Tall AV Rack
DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 84.75" 60 x 60 x 215.27 cm
MODEL CFR2127
The Component Series Stackable Skeleton Racks were designed with high performance and structural integrity in mind. The open design of these racks provides versatility for a variety of height combinations and mounting solutions with no loss of RU space when stacked. The racks include screws, removable shelves and blanking panels for easy assembly in just 15 minutes.
2U SHELF
15U Component Rack
PRODUCT WEIGHT 129 lbs / 58.64 kg WEIGHT CAPACITY 750 lbs / 340.91 kg RACK SPACES 27U
PREASSEMBLED WITH: (2) 1U shelf (2) 1U Blanking Panel (6) 2U shelf (6) 2U Blanking Panel (2) Tie Bars
INTERIOR USABLE SPACE (w x d) 19.4" x 21.60" 49.28 x 54.86 cm
Quick and easy assembly in just 15 minutes Versatile racks can be mounted directly to wall studs or concrete with included hardware, or can be used freestanding on included leveling feet Modular rack structures are SANUS EcoSystem™ compatible
34" Tall AV Rack
DIMENSIONS (w x d x h) WITH CASTERS 23.62" x 23.62" x 34" 60 x 60 x 86.36 cm DIMENSIONS (w x d x h) WITHOUT CASTERS 23.62" x 23.62" x 31.20" 60 x 60 x 79.25 cm
PRODUCT WEIGHT 113.8 lbs / 51.73 kg WEIGHT CAPACITY 500 lbs / 227.27 kg RACK SPACES 15U
ON-WALL SWING OUT ACCESSORY
PREASSEMBLED WITH: (2) 1U shelf (2) 1U Blanking Panel (2) 2U shelf (2) 2U Blanking Panel (1) Tie Bar
INTERIOR USABLE SPACE (w x d) 19.4" x 21.60" 49.28 x 54.86 cm
CASTER KIT
DIMENSIONS (w x d x h) 20.40" x 20" x 35" 51.82 x 50.8 x 88.9 cm
MODEL CFR1615
CFA16SM
CA6CK- 4 Casters
Allows a CFR1615 or CFR1620 Component Series AV rack to mount and swivel on wall
Provides smooth rolling for CFR1620 and CFR1615 Component Series AV Racks
WEIGHT CAPACITY WHEN WALL MOUNTED 200 lbs / 90.7 kg
15U Stackable Skeleton Rack
DIMENSIONS (w x d x h) 20.40" x 20" x 26.2" 51.82 x 50.8 x 66.55 cm
WEIGHT CAPACITY USING INCLUDED LEVELING FEET OR OPTIONAL CASTERS 600 lbs / 272.73 kg
RACK SPACES 20U
INCLUDED: (1) 1U shelf (2) 1U Blanking Panel (1) 2U shelf (25) rack mount screws (4) leveling feet
26" Tall AV Rack
WEIGHT CAPACITY WHEN WALL MOUNTED 200 lbs / 90.7 kg
WEIGHT CAPACITY USING INCLUDED LEVELING FEET OR OPTIONAL CASTERS 600 lbs / 272.73 kg
RACK SPACES 15U
INCLUDED: (1) 1U shelf (2) 1U Blanking Panel (1) 2U shelf (25) rack mount screws (4) leveling feet
LOOK FOR COMPONENT SERIES RACK BUNDLES ON THE NEXT PAGE
2
COMPONENT SERIES RACKS SANUS COMPONENT SERIES RACK ACCESSORIES 28
COMPONENT SERIES STACKABLE SKELETON RACKS SANUS COMPONENT SERIES RACK ACCESSORIES
283
SANUS EcoSystem™
SANUS EcoSystem™ COMPONENT SERIES / RACK ACCESSORIES
MULTI-VOLT SYSTEM SAVES SPACE AND TIME
The SANUS EcoSystem™ is a fully customizable accessory that serves as the single power source for all low-voltage equipment in a rack. The multi-volt power supply features regulated 12 Volt DC and regulated 5 Volt DC power ports. Switches on the front control master power, as well as front and back lighting ports. A thermostat probe that controls output ports for cooling fans is included. Along with the available LED lights and fan accessories, use the power cord accessories to connect and power all other compatible low voltage devices and get rid of all those transformers.
MODEL CAPT01
Multi-Volt Power Supply
Light Switches Easily turn front task light and rear work light on and off
Remove This From Your Rack
Additional Power Front side 5V USB port, 12V always on and front light connections provide added convenience
5V USB Ports Easily connect up to three components with USB cables
MODEL CALT01
MODEL CAPW03,
BEFORE
Always On 12V Power For network switches, routers, modems, NAS drives, media boxes, control processors, baluns, etc.
1U Task Light
CAPW06, CAPW09
Power Wires
Thermostat Controlled Keep components cool with available fans, which include 1U ultra quiet fan, 3U ultra quiet fan and 3U volume fan
Thermostat Included thermostat kit monitors the rack temperature and automatically activates fans
MODEL CALW01
Work Light, 2-Pack
MODEL CAFC01
1U Component Cooling Fan Kit
MODEL CAFQ01
3U High Volume Fan Kit
AFTER MODEL CAFH01
4
12V Lights Only Easily connect up to three components with USB cables
SANUS ECOSYSTEM SANUS COMPONENT SERIES RACK ACCESSORIES 28™
3U Ultra Quiet Fan Kit
SANUS ECOSYSTEM™
SANUS COMPONENT SERIES RACK ACCESSORIES
28 5
Rack Accessories
Rack Accessories
COMPONENT & STACKABLE SKELETON RACK ACCESSORIES
COMPONENT & STACKABLE SKELETON RACK ACCESSORIES
Rack accessories allow you to build your own rack or add to a current rack for a customizable solution to meet your exact needs.
POWER ACCESSORIES
CAPC01 Rack Mount Surge Protector and Power Conditioner
SHELVES AND DRAWERS
BLANKING PANELS
Fits all Component Series AV Racks
Fits Component Series AV Racks
CAPT01 Multi-Volt Power Supply
CAPS27 Vertical Power Strip
CASBP1 1U Steel Flat Blanking Panel
CASBP2 2U Steel Flat Blanking Panel
CAVBP1 1U Flanged Steel Vent Panel
CAVBP2 2U Flanged Steel Vent Panel
CASBP3 3U Steel Flat Blanking Panel
CAPS12 Vertical Surge Protector and Power Conditioner
Fits all Component Series AV Racks
SMALL PARTS PANEL
Fits all Component Series AV Racks
KITS
CAVBP3 3U Flanged Steel Vent Panel
Fits CFR2144, CFR2136, CFR2127, and CFR2115
CASPK CASH21, CASH22, CASH23 1U, 2U, 3U Vented Shelf
SCREWS
CADR2 2U Economy Sliding Drawer
CASS10 Shelf Stops
Create easily accessible and secure storage space for small AV components on the side
Fits all Component Series AV Racks
CASC500 500 Extra Screws
CASC100 100 Extra Screws
TIE BARS, WIRE TIES & LACING STRIPS
CATBL210 19" L-Shaped Tie Bars
8
CADR4 4U Economy Sliding Drawer
CAGK Ganging Kit
CALK Side Panel Lock and Keys (2)
CASC25 25 Extra Screws
Fits all Component Series AV Racks
CATB010-B1 Offset Tie Bar
CACT100 Wire Ties
CALS45 Lacing Strips
ACCESSORIES SANUS COMPONENT SERIES RACKRACK ACCESSORIES 28
RACK ACCESSORIES
SANUS COMPONENT SERIES RACK ACCESSORIES
289
Euro Series Accessories
Euro Series Racks MODULAR DESIGN / CUSTOMIZABLE
The Euro Series AV racks create a clean, modern look while featuring a modular design that can easily be expanded to fit any AV system. Wire management clips secure loose cables for an organized appearance, and adjustable casters ensure the units are always stable and aligned, even on uneven surfaces. MODEL EFAV40
AV Base and Shelves MODEL EFAP21
Fully customizable modular design
Pull-Out Base
Solid steel construction provides strength and support Open design allows airflow to keep components cool Includes clips to secure loose cables DIMENSIONS (w x d x h) 40.50" x 20.45" x 22.87" 102.87 x 51.94 x 58.09 cm
TOP SHELF DIMENSIONS (w x d) 40.5" x 20.5" 102.87 x 52.07 cm TOP SHELF CAPACITY 125 lbs / 56.82 kg
MODEL EFA31
MIDDLE SHELF DIMENSIONS (w x d) 40.5" x 20.5" 102.87 x 52.07 cm
BOTTOM SHELF DIMENSIONS (w x d) 40.5" x 20.5" 102.87 x 52.07 cm
MIDDLE SHELF CAPACITY 125 lbs / 56.82 kg
BOTTOM SHELF CAPACITY 125 lbs / 56.82 kg
TOP SHELF DIMENSIONS (w x d) 22.48" x 20.5" 57.1 x 52.12 cm TOP SHELF CAPACITY 80 lbs / 36.36 kg
AV Base & Shelf
MIDDLE SHELF DIMENSIONS (w x d) 22.48" x 20.5" 57.1 x 52.12 cm
BOTTOM SHELF DIMENSIONS (w x d) 22.48" x 20.5" 57.1 x 52.12 cm
MIDDLE SHELF CAPACITY 80 lbs / 36.36 kg
BOTTOM SHELF CAPACITY 80 lbs / 36.36 kg
MODEL EFAVS
EFP12, EFP5
Extended-Height Pillars for audio base (model EFAB) or video stand (model EFAV) EFP18 includes rack rail conversion kit (4 pillars and two rack rail wraps)
EFP18
EFP12
EFP5
WEIGHT CAPACITY 125 lbs / 56.6 kg
TOP SHELF CAPACITY 125 lbs / 56.6 kg
10
Works with EFAS expansion shelf and select Euro Series accessories
DIMENSIONS (w x d x h) 40.5" x 20.52" x 5.46" 102.87 x 52.12 x 13.87 cm
TOP SHELF DIMENSIONS (w x d) 40.50" x 20.45" 51.94 x 56.82 cm
AV Shelf
MODEL EFP18,
Audio Expansion Shelf
DIMENSIONS (w x d x h) 40.5" x 20.45" x 14.18" 102.87 x 52.94 x 36.02 cm
MODEL EFAS
SHELF SIZE 22.5" x 20.5" 57.1 x 52.1
Audio Rack DIMENSIONS (w x d x h) 22.48" x 20.52" x 30.59" 57.1 x 52.12 x 77.7 cm
MODEL EFAVB
DIMENSIONS (w x d x h) 22.5" x 22" x 3.8" 57.1 x 55.9 x 9.6 cm
EFR12 MODEL EFAB
Rack rail conversion kit
CK2
Caster Kit
EFWMC
Wire Management Clips
Audio Base
DIMENSIONS (w x d x h) 22.48" x19.47" x 8.71" 57.1 x 49.45 x 22.12 cm
DIMENSIONS (w x d x h) 22.48" x 19.48" x 8.71" 57.1 x 49.48 x 22.12 cm
WEIGHT CAPACITY 80 lbs / 36.2 kg
WEIGHT CAPACITY 125 lbs / 56.6 kg
EURO SERIES RACKS SANUS COMPONENT SERIES RACK ACCESSORIES 28
For use with Euro Accessory Model EFP12
EURO SERIES ACCESSORIES SANUS COMPONENT SERIES RACK ACCESSORIES
11 28
SANUS products are proudly designed and engineered in the USA. We strive to offer you safe products that provide a joyful experience while also enhancing your lifestyle. Visit www.sanus.com for details
LEARN MORE www.sanus.com
m.sanus.com
SanusSystems
SanusSystems
Sanus
© 2015 Milestone AV Technologies, a Pritzker Group Company. All Rights Reserved. SANUS and the SANUS Logo are registered trademarks of Milestone. All other brand names or marks are used for identification purposes and are trademarks of Milestone. All patents are protected under existing designations. Other patents pending. All information and designs contained are proprietary property of Milestone AV and may not be reproduced without express written consent of Milestone AV Technologies.
[email protected] | PHONE 800.359.5520 | FAX 651.636.0367
1015
