Transcript
*Prices are Subject to Change without Notice.*
M1 Series Oil & Gas
NEW SUPER HIGH EFFICIENCY OIL AND GAS FURNACES by Intertherm engineered these furnaces for ease of installation as well as high efficiency in manufactured or modular homes. Cabinet insulation absorbs operating noise rendering a whisper quiet product. Gas units come set up for natural gas, however, conversion takes a few minutes with new style burner. Comes with two washable permanent air filters. May be installed in a closet or alcove with 0" clearance back and sides. Oil furnaces use kerosene or #2 fuel oil. These furnaces are easily adaptable to accept add-on air conditioners or heat pumps. One (1) year limited warranty on parts, one (1) year limited warranty on labor, ten (10) year limited heat exchanger warranty on product sold after Feb. 1, 2006. UL listed and CSA certified.
Part Number 1-M5SB066 1-M5SB086 1-M1MB056 1-M1MB070 1-M1MB077 1-M1MB090
Fuel Type
BTUH Output
Flue Dia
Ign Type
Afue
Oil Oil Gas Gas Gas Gas
57,000 72,000 46,000 57,000 62,000 70,000
5 In. 5 In. 5 In. 5 In. 5 In. 5 In.
A A C C C C
84.00% 82.00% 81.00% 81.00% 80.00% 80.00%
Price
$1,376.00 $1,417.00 $881.00 $887.00 $1,000.00 $1,169.00
E4E Series Electric
ELECTRIC FURNACES by May be installed in a closet or alcove, approved for single/multi-story residential or mobile/modular structures. May be used for upflow or counter flow applications, approved for zero clearance from combustible materials, air filter is in return end of furnace, has an area on left front of cabinet for refrigeration tubing. UL listed and CSA certified. All electric furnaces are shipped less grill/frame assembly, priced below. 1-year limited parts warranty, 1-year limited labor warranty on product sold after Feb. 1, 2006.
Part Number 1-E4EB010 1-E4EB012 1-E4EB015 1-E4EB017 1-E4EB020 1-9029890
Description
KW
BTUH Output
10.4 12 15.4 16.6 20.4
35,000 41,000 53,000 57,000 70,000
GRILL/FRAME ASSEMBLY (27"H x 20"W)
Price
$573.00 $595.00 $626.00 $649.00 $698.00 $39.00
Dimensions of E3 series furnaces: Height (incl. grill) 56", Width 20", Depth 24-3/4". Note: E3EB series has a 4-speed blower capable of handling up thru 4 tons of cooling at .3 in. esp.
(336) 744-9071 Winston-Salem, NC
Page 3
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
FLUE ASSEMBLIES FOR INTERTHERM M-SERIES FURNACES
Part Number 1-9036580 1-9036600 1-9036640
1-9036660
Description TELESCOPING FLUE ASSEMBLY Extends from 15" min. to 23" max. measuring from roof flange to furnace. Use with oil or gas. Flat flange. TELESCOPING FLUE ASSEMBLY Extends from 27" min. to 47" max. measuring from roof flange to furnace. Use with oil or gas. Flat flange. TELESCOPING FLUE ASSEMBLY Extends from 35" min. to 63" max. measuring from roof flange to furnace. Use with oil or gas. Slope flange will flex from 3/12 pitch to 5/12 pitch. TELESCOPING FLUE ASSEMBLY Extends from 51" min. to 95" max. measuring from roof flange to furnace. Use with oil or gas. Slope flange will flex from 3/12 pitch to 5/12 pitch.
Size
Price
5" Dia. Pipe
$112.00
5" Dia. Pipe
$145.00
5" Dia. Pipe
$186.00
5" Dia. Pipe
$276.00
DUCT CONNECTORS FOR INTERTHERM M AND E SERIES FURNACES
Part Number 1-9019870 1-9019880 1-9019890
Description DUCT CONNECTOR DUCT CONNECTOR DUCT CONNECTOR
Price 11.25" x 13.5" x .88" 11.25" x 13.5" x 2" 11.25" x 13.5" x 4.25"
$37.30 $37.30 $34.99
GRILL & FRAME ASSEMBLY FOR INTERTHERM E SERIES ELECTRIC FURNACES Used on Nordyne Electric Furnaces when furnace is installed in an alcove. Grill overall size is 20” wide x 27” high. Grill color is white.
Part Number 1-9029890
Description GRILL/FRAME ASSEMBLY (27"H x 20"W)
(336) 744-9071 Winston-Salem, NC
Page 4
Price
$39.00
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
CMF Series Oil
THE 3 IN 1 FURNACE by
CONVERSION KIT #9031000 converts cmf-80po (60,000 btuh output, 80% afue) to cmf-65po (52,000 btuh output, 80% afue)
CONVERSION KIT #9031020 converts cmf-80po (60,000 btuh output, 80% afue) to cmf-100po (72,000 btuh output, 80% afue)
CONVERTS FROM OIL TO GAS AND VICE-VERSA IN APPROXIMATELY 3 MINUTES
3-SPEED BLOWER ASSEMBLY
ONLY 18 INCHES WIDE, 57 INCHES TALL, AND 24-1/4 INCHES DEEP
MAY BE INSTALLED IN A CLOSET OR ALCOVE
UL LISTED
HAS 4 INCH FLUE ASSEMBLY
PULLS COMBUSTION AIR FROM UNDER THE HOME
DOES NOT ACCEPT SPLIT AIR CONDITIONING
LIFETIME LIMITED WARRANTY ON HEAT EXCHANGER, TO ORIGINAL OWNER, FOR PRODUCT MADE AFTER 12/31/2012
ONE YEAR LIMITED PARTS AND ONE YEAR LIMITED LABOR WARRANTY
WE STOCK A FULL LINE OF REPAIR PARTS FOR MILLER AND INTERTHERM BRAND FURNACES
Part Number 1-CMF80PO 1-9031000 1-9031020 1-104060000 1-104060018 1-103947002 1-9034530
Description OIL FURNACE (60,000 btuh output, 80% afue) CONVERSION KIT (Converts CMF80PO to CMF65PO - 52,000 BTUH Output) CONVERSION KIT (Converts CMF80PO to CMF100PO - 72,000 BTUH Output) FLUE ASSEMBLY (4" dia. pipe, 12" from roof flange to bottom of roof jack) (SRJ-1) FLUE ASSEMBLY (4" dia. pipe, 48" from roof flange to bottom of roof jack) (SRJ-4) FLUE PIPE (4" X 28") BASE (MA-200 for gas or oil)
Price
$1,629.00 $22.00 $49.00 $124.00 $236.00 $18.49 $91.00
CMF Series Oil Cottage Base
Combine this base with any CMF series furnace (gas, oil, or electric) and you can heat any small house, cabin, or a-frame without the use of duct work. Width 18", Depth 24", Height 8-3/4"
Part Number 1-9016960
Price
$260.00
AUTOMATIC CLOSE-OFF DAMPER Federal mobile home standard 280.707-A-2 requires the installation of a close-off damper at the furnace base to prevent cold air from being discharged, by a package air conditioning system, into the furnace area and creating condensation within the furnace heat exchanger. This condensation causes premature heat exchanger failure. This regulation applies to fuel burning furnaces only. Part Number 1-9020950
(336) 744-9071 Winston-Salem, NC
Price
$95.00
Page 5
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
MEDALLION SERIES SPLIT-SYSTEM HEAT PUMPS BY The MT5 series heat pumps offer exceptional performance from a small compact package. When combined with our engineered coils and air handlers offer a full line of quality split system heating/cooling equipment. Some of the Features and Benefits: Durable, attractive cabinet, Copper tube/aluminum fin coils, Permanently lubricated motor, Full service valves, Plastic mesh hail guard, Time/temperature defrost, Removable top grill assembly, One piece top/orifice, Common suction service port, 2-1/2" high pedestal base, Five minute restart time delay, Suction accumulator, Hot gas muffler, Easy compressor and control panel side access. One (1) year limited parts and five (5) year limited compressor warranty. Part Number
Outdoor Heat Pump Sections R410A Refrigerant 13 Seer
BTUH Cooling
BTUH Heat
SEER
HSPF
COP
1-921676N 1-921677N 1-921678N 1-920685N 1-920686N
MT4QD 024 K MT4QD 030 K MT4QD 036 K MT4QD 042 K MT4QD 048 K
23,600 29,200 35,400 39,000 46,500
23,600 30,000 36,000 40,500 46,500
13 13 13 13 13
9 8 8 8 8
3.6 3.4 3.6 3.6 3.6
Price
$1,236.00 $1,416.00 $1,572.00 $1,731.00 $1,852.00
Outdoor units have quick-connect type lineset connections.
UNCASED COILS, A-TYPE, UP/DOWN FLOW, AIR CONDITIONER & HEAT PUMP
Part Number 1-9206880 1-9206890 1-9206900 1-5595760 1-5595770
Size
SEER
Model
Height
24,000 30,000 36,000 42,000 48,000
13 13 13 13 13
C5QA X25U-B C5QA X30U-B C5QA X36U-B CM4Q 53U CM4Q 54U
19.0" 19.0" 19.0" 18.5" 18.5"
Price
$408.00 $425.00 $427.00 $478.00 $533.00
Above coils are 18.5" wide x 19.5" deep x the height listed above. Above coils have a TXV (thermostatic expansion valve) for metering the refrigerant. Condensate pans are made of molded ryolite that will not rust. All Coils have quick-connect type connections.
REFRIGERANT LINESETS (INSULATED, HAS QUICK CONNECTIONS BOTH ENDS)
Part Number 1-9207050 1-9207090 1-9207100
Description 3/4" & 3/8" DIAMETER, 20 FT. LONG 3/4" & 3/8" DIAMETER, 30 FT. LONG 7/8" & 3/8" DIAMETER, 30 FT. LONG
Price
$181.00 $268.00 $298.00
THERMOSTATS, AIR FILTER KITS, FAN TIME DELAY KITS
Part Number 1-9197600 1-9177630 1-9177630 1-9145390
Description HEAT PUMP THERMOSTAT (W-R BRAND) (Non-Programmable Digital Manuel Change Over) AIR FILTER KIT FOR CMQX TYPE A-COILS, 2/PKG AIR FILTER KIT FOR C5QA TYPE A-COILS, 2/PKG ADAPTER KIT (Aluminum filters, 56" drain hose and close-off plates for coil sizes C3(5)Q(D)A(T)(X)24-47 & 55 + CM4Q(B)53U-54U
(336) 744-9071 Winston-Salem, NC
Page 6
Price
$71.00 $17.35 $17.35 $30.00
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Package Units
PACKAGE AIR CONDITIONERS BY
The P3 series air conditioner is compact, reliable and competitively priced. Easy access to unit components makes it servicer and installer friendly. All units are 49 inches long, 35 inches wide and 30.2 inches high. All units require 12 inch diameter supply and 14 inch diameter return duct sizes. One year limited warranty on parts and labor, five year limited warranty on compressor. Part Number
BTUH Output
SEER
Packaged Air Conditioners 13 Seer
1-9189730 1-9189740 1-9189750 1-9189760 1-9189770
24,000 BTUH 30,000 BTUH 35,400 BTUH 40.500 BTUH 47,500 BTUH
13 13 13 13 13
P5RD 024 K P5RD 030 K P5RD 036 K P5RD 042 K P5RD 048 K
Price
$1,397.00 $1,499.00 $1,698.00 $1,862.00 $1,985.00
Sheet Metal Kits
SHEET M ETAL K ITS FOR PACK AGED AIR CONDITIONERS AND HEAT PUMPS
Part Number 1-3401 1-3405 1-3410
Description SINGLE WIDE FITTING KIT (Contains one 12" supply duct adapter w/damper, & one 12" x 20" x 14" return w/filter and grill) SUPPLY DUCT ADAPTER WITH CLOSE-OFF DAMPER (To Make Double Wide Fitting Kit Combine Part #'s 1-3401+1-3410 with 1-3405) WYE FITTING, 12" x 12" x 12"
Price
$89.00 $29.95 $26.85
Heater Kits
ELECTRIC HEAT KITS FOR P3/P5 AND Q3/Q5 PACKAGED UNITS
Part Number 1-9171660
Description H3HK-005H-01
KW
BTUH Output
5
1-9171680
H3HK-010H-01
10
1-9171690
H3HK-015H-01
15
17,000 BTUH @ 240 VOLTS 34,000 BTUH @ 240 VOLTS 52,500 BTUH @ 240 VOLTS
Price
$98.75 $159.00 $199.00
Thermostat
HEATING COOLING THERMOSTAT WITH SUB-BASE
Part Number 1-6242920 1-9196040
Description HEAT-COOL THERMOSTAT W/SUB-BASE for Air Conditioners HEAT PUMP THERMOSTAT, Digital, Non-Programmable (White-Rodges Brand, Manual Change-over from heat to cool)
(336) 744-9071 Winston-Salem, NC
Page 7
Price
$39.00 $69.00
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Package Units
PACKAGE HEAT PUMPS BY
INTERTHERM’S packaged heat pump looks like, and is the same size as the packaged air conditioner, comes in five capacities, and uses the same accessories as the packaged air conditioners. The packaged heat pump has too many features to mention herein, please contact us for literature on these fine products. One year limited warranty on parts and labor and a five year limited compressor warranty. Part Number
BTUH Output
SEER
Packaged Heat Pumps 13 Seer
1-9201310 1-9201320 1-9201330 1-9201340 1-9201350
24,000 BTUH 30,000 BTUH 34,400 BTUH 42,000 BTUH 47,000 BTUH
13 13 13 13 13
Q7RD 024K Q7RD 030K Q7RD 036K Q7RD 042K Q7RD 048K
Price
$2,059.00 $2,091.00 $2,317.00 $2,353.00 $2,534.00
Sheet Metal Kits
SHEET M ETAL K ITS FOR PACK AGED AIR CONDITIONERS AND HEAT PUMPS
Part Number 1-3401 1-3405 1-3410
Description SINGLE WIDE FITTING KIT (Contains one 12" supply duct adapter w/damper, & one 12" x 20" x 14" return w/filter and grill) SUPPLY DUCT ADAPTER WITH CLOSE-OFF DAMPER (To Make Double Wide Fitting Kit Combine Part #'s 1-3401+1-3410 with 1-3405) WYE FITTING, 12" x 12" x 12"
Price
$89.00 $29.95 $26.85
Heater Kits
ELECTRIC HEAT KITS FOR P3/P5 AND Q3/Q5 PACKAGED UNITS
Part Number 1-9171660
Description H3HK-005H-01
KW
BTUH Output
5
1-9171680
H3HK-010H-01
10
1-9171690
H3HK-015H-01
15
17,000 BTUH @ 240 VOLTS 34,000 BTUH @ 240 VOLTS 52,500 BTUH @ 240 VOLTS
Price
$98.75 $159.00 $199.00
Thermostat
HEAT PUMP THERMOSTAT
Part Number 1-9174330
Description HEAT PUMP THERMOSTAT,Digital, Non-Programmable (Manuel change-over from heat to cool position)
(336) 744-9071 Winston-Salem, NC
Page 8
Price
$70.06
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
BLOWER ASSEMBLIES to install AIR CONDITIONERS and/or HEAT PUMPS on VARIOUS FURNACES Part Number 1-9012820
1-9028050 1-9029930
1-9029850
1-9110300
1-9019980
1-9019990
1-9034130
1-9034140
1-9028090
1-9028100
Description BLOWER ASSEMBLY, (2 thru 4 tons) Intertherm FE series electric furnaces and Colemans 3400 and 3500 series electric furnaces. BLOWER ASSEMBLY, (2 thru 4 tons) Intertherm's E1 series electric furnaces BLOWER ASSEMBLY, (2 thru 4 tons) Intertherm E2EH & E3EH series electric furnaces BLOWER ASSEMBLY, (2 thru 5 tons) Intertherm E2EH & E3EH series electric furnaces BLOWER ASSEMBLY, (2 thru 4 tons) Intertherm's MSH & MGH series furnaces without an "A" in the model number BLOWER ASSEMBLY, (2 thru 3.5 tons) Intertherm MSH & MGH series furnaces with an “A” in the model number. Also fits Coleman/Evcon’s 7900 series. BLOWER ASSEMBLY, (2 thru 4 tons) Intertherm MSH & MGH series furnaces with an “A” in the model number. Also fits Coleman/Evcon 7900 series. BLOWER ASSEMBLY, (2 thru 4 tons) Intertherm M1 series oil and gas furnaces. 4-speed, 2 thru 4 ton capacity BLOWER ASSEMBLY, (2 thru 5 tons) Intertherm M1 series oil and gas furnaces. 4-speed, 2 thru 5 ton capacity BLOWER ASSEMBLY, (2 thru 3.5 tons) Intertherm MG, MS, MB & MM series with an "A" in the model number. BLOWER ASSEMBLY, (2 thru 4 tons) Intertherm MG, MS, MB & MM series with an “A” in the model number.
Price
$259.00
$259.00 $261.00 $299.00 $318.00
AIR HANDLERS by INTERTHERM $206.00
$322.00
$298.00 $351.00
These air handlers are designed and approved for attic, basement, alcove, closet and crawl space installations. May be installed in upflow, horizontal left and right and downflow (downflow with appropriate field kit) discharge position. Electric heater kits are available in 5 kw thru 20 kw. Coil is factory installed for air conditioning/heat pump applications. All coils have TXV(thermostatic expansion valve) metering device. 208-240 volt single phase current. Coils have sweat connections. R-410A refrigerant.
$249.00
A Cabinet: 43-5/16” H x 14-3/8” W x 22” D B Cabinet: 43-5/16” H x 19-11/16” W x 22” D C Cabinet: 55-15/16” H x 22-7/16” W x 22” D
$292.00
One (1) year limited parts and labor warranty. Built-in filter rack
Slide-in Controls
Simple wiring
Insulated Cabinet
Multi-speed Blower
May be field up-fitted to variable speed
Part Number 1-904303D 1-904304D 1-904307D 1-904308D 1-904309D
(336) 744-9071 Winston-Salem, NC
Page 9
Description 2 TON CAPACITY (A Cabinet), B5BM-X24K-A 2.5 TON CAPACITY (A Cabinet), B5BM-X30K-A 3 TON CAPACITY (B Cabinet), B5BM-X36K-A 3.5 TON CAPACITY (B Cabinet), B5BM-X42K-A 4 TON CAPACITY (C Cabinet), B5BM-X48K-C
Price
$535.00 $573.00 $693.00 $739.00 $894.00
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
240 VOLT SINGLE PHASE ELECTRIC HEAT KITS
Part Number 1-9044070 1-9044120 1-9044140
KW
Cabinet Size
5 10 15
A,B,C A,B,C B,C
Hollow Spray
OIL BURNER NOZZLES
Price
$139.00 $186.00 $258.00
DOWNFLOW ADAPTER KITS Part Number 1-9173420 1-9193210 1-9193220
Cabinet Size
A-MODEL B-MODEL C-MODEL
Price
$57.00 $63.00 $61.49
SINGLE CIRCUIT ADAPTER KITS Part Number 1-9138740
Description Heater kits with 2 breakers
Most oil burner nozzles are designed to operate most efficient at 100 psig pump pressure. However, some burner manufacturers have designed their burners to operate at 120 psig, such as Becketts burner used on Intertherm’s M series furnaces.
Price
$16.98
Note: Variable speed blower system may be field installed on any of the above air handlers. Call us for details.
Part Number 1-3009 1-3004 1-2999 1-3001 1-3002 1-2998 1-3003 1-3007 1-3005 1-3006 1-2997 1-2996 1-2995 1-2994
Description
Nozzles Type A Or H
HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY HOLLOW SPRAY
.50 GPH, 70 A, NOZZLE .50 GPH, 80 A, NOZZLE .50 GPH, 90 A, NOZZLE .60 GPH, 80 A, NOZZLE .60 GPH, 90 A, NOZZLE .65 GPH, 80 A, NOZZLE .65 GPH, 90 A, NOZZLE .70 GPH, 80 A, NOZZLE .75 GPH, 80 A, NOZZLE .75 GPH, 90 A, NOZZLE .85 GPH, 80 A, NOZZLE .90 GPH, 80 A, NOZZLE 1.0 GPH, 80 A, NOZZLE 1.10 GPH, 80
A, NOZZLE
Price
$8.98 $9.98 $8.98 $8.98 $8.98 $8.98 $8.98 $8.98 $8.98 $8.98 $8.98 $8.98 $8.98 $8.98
Semi-Solid Spray
We stock repair parts for Coleman/Evcon Heating-Cooling products. We are one of the oldest Nordyne, Intertherm Brand Distributors in the Nation.
Part Number 1-3000 1-2986 1-2987 1-2988 1-2989 1-2990 1-3008
Description
Nozzles Type W Or SS
SEMI-SOLID SPRAY SEMI-SOLID SPRAY SEMI-SOLID SPRAY SEMI-SOLID SPRAY SEMI-SOLID SPRAY SEMI-SOLID SPRAY SEMI-SOLID SPRAY
.55 GPH, 90 W, NOZZLE
Description
Nozzles Type B Or S
SOLID SPRAY SOLID SPRAY
.60 GPH, 80 B, NOZZLE
.60 GPH, 80 W, NOZZLE .60 GPH, 90 W, NOZZLE .65 GPH, 80 W, NOZZLE .65 GPH, 90 W, NOZZLE .75 GPH, 80 W, NOZZLE 6601-181 NOZZLE for INTERTHER M mac series and some msh series furnaces.
Price
$8.98 $8.98 $8.98 $8.98 $8.98 $8.98 $12.36
Solid Spray Part Number 1-2993 1-2992
.75 GPH, 90 S, NOZZLE
Price
$8.98 $8.98
Please call for volume pricing on nozzles
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and Heat Pump Parts.
(336) 744-9071 Winston-Salem, NC
Page 10
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Oil Burner
FUEL OIL FILTERS by MITCO
OIL BURNER MOTORS
Mitco makes the perfect fuel filter for oil fired heating appliances used in small to average size homes and commercial buildings. Ideal for final filtration in central fuel oil distribution systems. May be used in one or two pipe systems. COMPLETE FILTER ASSEMBLY, 264M Replaces 1A-25A and many others. Has 3/8 inch F.P.T. on inlet and outlet. Will handle up to 15 gallon per hour flow rate. Part Number 1-3010 1-3010-3
Description 1 to 3 3 & up
115 Volts Sleeve Bearings Continuous Duty Reversible Rotation
Part Number 1-2801 1-2803
Description 1725 RPM 3450 RPM
Belted Fan
BELTED FAN & BLOWER MOTOR
Price
$18.98 $12.98
115 Volts 6.7 AMP Sleeve Bearings 48 & 56 Frame Automatic Reset Overload Continuous Duty 1725 RPM 1/2" Dia. Shaft Resilient Mount Reversible Rotation
COMPLETE FILTER ASSEMBLY, 265M Replaces 2-A-700-A. Has 3/8 inch F.P.T. on inlet and outlet. Will handle up to 25 gallon per hour flow rate. Part Number 1-3012
Price
$29.98
Price
$69.00 $69.00
Part Number 1-2805
Description 1/3 HP
Price
$114.00
MICRO-FLOW REPLACEMENT CARTRIDGES FOR FILTER ASSEMBLIES Comes with three gaskets; body, center bolt and vent.
REPLACEMENT CARTRIDGE FOR: Mitco 264M & 264FM, General 1A-25A, Harvey 264 & 264F, Unifilter 77 and Westwood S254. This is the finest replacement cartridge on the market today, is especially good for smaller nozzles as used in manufactured home furnaces. Part Number 1-3011 1-3011-6
Description 1 to 6 6 & up
Price
$2.29 $1.69
REPLACEMENT CARTRIDGE FOR: Mitco 265M & 265FM, General 2A-700A, Harvey 265 & 265FM and Unifilter 99. Part Number 1-3013
(336) 744-9071 Winston-Salem, NC
We are the Largest Authorized Distributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the East Coast.
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and Heat Pump Parts.
Price
$3.50
Page 11
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
COMBINATION FAN & LIMIT CONTROL
CAPACITORS Start Capacitors
Part Number 1-2806 1-2807
Part Number 1-6202731 1-6202711 1-6227320 1-6202331 1-6214350 1-6204991 1-6206840 1-6214990 1-6212230 1-6206770 1-6212250 1-6207770 1-6207450 1-01-0265 1-6207620 1-6207640 1-6208870 1-6212260 1-6207650 1-6207630 1-6208880 1-6212570 1-6209680 1-6207790 1-6216360 1-6209910 1-6214660 1-6216980
Description 43-53 MFD, 220/250 VAC 108-130 MFD, 330 VAC
Price
$6.98 $13.24
Part Number 1-6264360 1-306039003
Description 5" Insertion 11" Insertion
Price
$89.58 $161.47
CAPACITORS
SINGLE STAGE OIL PUMPS
Run Capacitors Oval and Round Configurations Dual and Single MFD Ratings
“Suntec Brand”
Description 5 MFD, 370 V, OVAL 7.5 MFD, 370 V, OVAL 7.5 MFD, 370 V, ROUND 10 MFD, 370 V, OVAL 10 MFD, 370 V, ROUND 12.5 MFD, 370 V, OVAL 15 MFD, 370 V, ROUND 15 MFD, 370 V, ROUND 20 MFD, 370 V, OVAL 25+5 MFD, 370 V, ROUND 30 MFD, 440 V, ROUND 30+5 MFD, 370 V, ROUND 35 MFD, 440 V, ROUND 35+3 MFD, 370 V, ROUND 35+5 MFD, 370 V, ROUND 35+5 MFD, 440 V, ROUND 35+7.5 MFD, 370 V, OVAL 40 MFD, 440 V, ROUND 40+5 MFD, 440 V, OVAL 40+5 MFD, 370 V, ROUND 40+7 MFD, 370 V, OVAL 40+7.5 MFD, 440 V, ROUND 40+7.5 MFD, 440 V, OVAL 50+5 MFD, 440 V, ROUND 55+5 MFD, 370 V, ROUND 55+7.5 MFD, 440 V, ROUND 60+5 MFD, 370 V, ROUND 60+7.5 MFD, 370 V, ROUND
Price
$5.00 $5.46 $0.00 $5.70 $6.02 $8.48 $14.40 $5.27 $9.69 $9.69 $11.38 $10.40 $11.31 $14.96 $11.46 $11.13 $14.67 $12.62 $13.26 $13.34 $15.53 $15.90 $13.41 $14.88 $15.95 $20.36 $16.57 $18.73
Part Number 1-3035 1-3036
Description 1725 RPM 3450 RPM
Price
$129.00 $119.00
SINGLE STAGE OIL PUMP “Clean-Cut Technology” “Suntec Brand” This pump has a built-in solenoid valve that prevents afterburn and allows for prepurging. Delivers up to 4 gph of fuel at 100 psig. Must be used with a R7184B1032 or equivalent primary control or Precision Delay (PD) timer. Used on all Intertherm & Miller oil furnaces effective 6-28-04. Part Number 1-3038
Description 3450 RPM
Price
$119.00
SUNDSTRAND
Part Number 1-2818 1-2819
Description Mini-Pump H & J Models
Price
$0.61 $0.61
WEBSTER
Part Number 1-2820 1-2821
(336) 744-9071 Winston-Salem, NC
Page 12
Description Mini-Pump Large Models
Price
$1.19 $0.69
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
FUEL PUM P STRAINERS
Part Number 1-2825 1-2826
Description J, H, & S Models A & B Models, 1-3/8"
CONDENSER FAN MOTOR 1/3 H.P., 208-240 volts, 7.5 MFD capacitor, 1/2" shaft, 1075 RPM., reversible, sleeve bearings.
Price
$4.49 $4.79
Part Number 1-2864
FUEL PUMP BY-PASS PLUGS Part Number 1-2828 1-2829
Description 1/16" Mini Pumps 1/8" Large Pumps
Price
$121.24
“ZOOM SPOUT OILER” Finest all-purpose turbine oil. Telescoping spout reaches almost everywhere. 4 fl. oz.
Price
$0.75 $1.29
OIL PUMP COUPLING “KOUPLING KING” KIT INCLUDES: Standard 5" long coupling assembly with 1/2" motor end cap, 3/8" pump end cap and 7/16" pump end cap. The right combination for most domestic oil burners. Just cut to desired length.
Part Number 1-2890 1-2890-6
Description 1 to 6 6 & up
Price
$1.98 $1.79
SHUT-OFF VALVES
Part Number 1-3050
Description “KOUPLING KING”
Sweat connections have extended copper fittings. Service port is machined for Schrader core. Front seating design with brass stem. Provides permanent access to system.
Price
$6.98
ELECTRODE SETTING GAUGE
Part Number 1-2895 1-2896
Description 3/8" SWEAT 3/4" SWEAT
Price
$31.10 $49.75
SEAL CAP MADE OF BRASS Part Number 1-2859
Price
$5.98
Provides for finger tightening only to seal off stem.
BLOWER MOTOR Sold 6 per card. This 48 frame, 1/3 hp, 208-230 volt, reversible, 3-speed motor is 5-1/2” in diameter and has a 1/2” diameter by 5” long shaft. Mounting bolts are 3-5/8” center to center and extend out from each end of motor one inch. Motor is rated at 2.9 amps and nominal speed is 1175 rpm. May be used in any position. The sleeve bearings are sealed and do not require oiling. Uses a 5 mfd capacitor. Electrical leads are 24” long. Has 1-year factory warranty. Part Number 1-2863
(336) 744-9071 Winston-Salem, NC
Part Number 1-2899
Price
$4.59
Price
$118.19
Page 13
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
COMPRESSOR LEADS
FUSIBLE LINK by MICROTEMP
12" long,#10 gauge insulated stranded wire leads are designed for replacing burned compressor leads. 3 leads per pkg.
For electric furnaces, duct heaters, heat pumps & other applications. Opens at 336 deg. F. Part Number 1-2850
Part Number 1-2860
COMPRESSOR TERMINAL REPAIR KIT
Price
$2.29
Replaces all damaged, burned or corroded standard compressor spade terminals. Tightens easily and quickly from the front with a screwdriver. Comes with three (red, white & blue color), four (4 ft.) foot long 10 AWG wire leads. Has insulated female spade connector on one end and insulated brass repair lug on the other.
FUSIBLE LINK by MICROTEMP For electric furnaces, duct heaters, heat pumps & other applications. Provides low cost protection against over heating. Max operation current is 15 AMP. Max operating voltage is 250 volts. Part Number 1-2861 1-2862
Price
$15.05
Description OPENS 257 DEG. F. OPENS 300 DEG. F.
Part Number 1-2851
Price
$31.95
Price
COMPRESSOR TERMINAL
$4.98 $4.98
Heavy duty zinc plated female terminal for up to #10 gauge wire. For a longer lasting connection, wires should be soldered to wire terminal after crimping. 18 terminals per package. Part Number 1-2852
Price
$4.20
VALVE CORE Part Number 1-2866 1-2867
Description OPENS 257 DEG. F. OPENS 300 DEG. F.
Fits all screw-in type valve stems.
Price
$4.98 $4.98 Part Number 1-2898
NOZZLE LINE FITTING
HANDLES FOR VALVES
Brass fitting has 3/16" flare threads on one end and 1/8" f.p.t. on other end. Comes with locking nut. Part Number 1-2840 1-2842
Description 1-7/16" OVERALL LENGTH 1-3/16" OVERALL LENGTH
Handles for oil tank valves, sillcock valves, gate valves, boiler drains and many other valves in both square and serrated shaft.
Price
$8.15 $9.19
Part Number 5-2017 5-2018
(336) 744-9071 Winston-Salem, NC
Price
$0.69
Page 14
Description SERRATED STEM SQUARE STEM
Price
$0.89 $0.89
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
FILTER/DRIERS
CONTROL VALVE FOR GAS
These liquid driers are designed to protect the refrigerant system from liquid and solid contaminants. Full flow fittings for low pressure drop. For use with CFC, HCFC & HFC refrigerants. Part Number
Sweat Capacity In Connections Tons
Overall Length
1-2830 1-2831
3/8" O.D. 1/2" O.D.
6.06" 6.06"
8.2 14.8
STRAIGHT THRU BODY 24 VOLT NATURAL GAS ONLY 250,000 BTUH
Price
$17.76 $21.52
Part Number 1-2903
Price
$98.00
FILTER/DRIERS (High Acid Capacity)
CONTROL VOLTAGE TRANSFORMER
These suction line filter/driers are designed to remove moisture, acids and contaminants from systems after a compressor burn-out. Low pressure drop, inlet pressure access valve. Excellent for burn-out clean-up. Designed for permanent installation. UL & CSA listed.
208-240 VOLTS TO 24 VOLTS 40 VA STEP-DOWN CLASS 2 8" COLOR CODED LEADS UL LISTED
Part Number
Sweat Capacity In Connections Tons
Overall Length
1-2833 1-2834
3/4" O.D. 7/8" O.D.
7.93" 8.43"
5.5 8.5
Part Number 1-2909
HOME GARD FREEZE ALARM
Price
$41.74 $54.70
Temperature Range: 40-70 DEG. F. Electrical Rating: 120 VAC, 150 W COMES WITH FLASHER DISC
FILTER DRIERS Suction Line (High Acid Capacity) Designed for system clean-up after compressor burn out. Lowest pressure drop, highest effective filter area. High capacity acid retention desiccants. Salt spray protection. Shortest system cut-out lengths allow installation in tight areas. UL listed. Sweat connectors. Two access valves simplify pressure drop measurement. Part Number
Sweat Capacity In Connections Tons
Overall Length
1-6690050 1-6690060
3/4" O.D. 7/8" O.D.
5.5" 5.75"
5 7.7
Price
$14.98
Part Number 1-2940
Price
$19.95
Price
$82.11 $127.92
PYROSTAT FLAME DETECTOR STACK MOUNTED FLAME DETECTOR 24 VOLT
Part Number 1-2901
(336) 744-9071 Winston-Salem, NC
Price
$39.95
Page 15
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Part Number 1-2971 1-2972
FAN & LIMIT SWITCHES ADJUSTABLE TYPE
5-KW STRINGER KIT ONLY
FAN SWITCHES
Comes with 2 ceramic insulators, nuts and washers. Must have a minimum of 3/8" between coil and any frame or unit member.
Description 90-130 DEG. 140-180 DEG.
Price
$12.29 $12.29
Part Number 1-2984
Price
$19.95
LIMIT SWITCHES Part Number 1-2974 1-2975
Description 135-175 DEG. 175-215 DEG.
Price
$12.29 $12.29
This fan switch is a replacement for most Duo-Therm oil and gas furnace fan switches. RANGE: 70 TO 160 DEG.
Part Number 1-2980
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and Heat Pump Parts.
Price
$29.49
Limit switch, looks like above fan switch. L 110 to 200 Adjustable Part Number 1-2981
Price
$29.49
HARD START KIT RELAY & START CAPACITOR Increases compressor starting torque by 500% on all single phase 115 volt to 288 volt units 4,000 to 120,000 btuh (1/2 hp to 10 hp). Easily installed. Part Number 1-2982
Description SPP-6
(336) 744-9071 Winston-Salem, NC
Price
$20.70
Page 16
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Analog
Current Probe
ANALOG MULTIMETER UTL2
CURRENT PROBE CA383B The CA383B clamp-on current probe has AC amperage range of 0-300 amps. Use with any DMM meter with a 200 AC MV range, such as the DM383B or the DM384. Come with soft carrying pouch and instructions. 1-Year Limited Warranty.
Pocket Size. Fuse Protected. Color coded for easy use. Diode Protected Meter Movement. Uses 1.5 V AA size battery (not included). 16 ranges: AC volts, DC volts, DC current, and OHMS. 1-Year Limited Warranty. Part Number 1-2881
Part Number 1-2885 Price
Temperature Adapter
$12.98
TEMPERATURE ADAPTER TA1K
Digital
DIGITAL MULTITESTER DM383
The TA1K is a K-type thermocouple temperature adapter. It can be used on digital multimeters having 200 MV DC and /or 24 V DC ranges. Plugs directly into “COM” and DCV/OHM input jacks. -50 Deg. to 199.9 Deg. F. on 200 MV DC range. -50 Deg. to 500 Deg. F. on 2 Volt DC range. Comes with battery and 4 ft. probe 1-Year Limited Warranty.
This meter has 30 ranges. 7 functions: AC volts, DC volts, AC amps, DC amps, OHMS, Audible continuity and Diode test. Low battery indication. Nearly 1" high LCD digits. Withstands a 10 ft. drop. Meets UL and IFC standards. Comes with battery, protective boot, test leads, and instructions. 5-Year Limited Warranty. Part Number 1-2882
Price
$47.95
Part Number 1-2884
Price
$44.98
Price
TEST LEADS ATL55
$79.00
DIGITAL MULTITESTER DM410 The DM410 meter has all the features of the DM383 model, plus flame safeguard and thermocouple testing capabilities. Designed especially for the HVAC service technician. DM410 comes with battery, protective boot, test leads and operating instructions. 5-Year Limited Warranty.
Part Number 1-2883
(336) 744-9071 Winston-Salem, NC
Insulated test leads for industry standard multimeters. One red and one black lead with alligator clips. Leads are 55” long. Part Number 1-2889
Price
$13.49
Price
$129.00
Page 17
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
FOR BECKETT BURNER MODELS A AND AF
FOR WHITE RODGERS NU-WAY BURNER MODELS 7062 AND 7063
FITS: NEW STYLE INTERTHERM
FITS: COLEMAN AND MILLER Part Number 1-3025
Price
$139.67
Part Number 1-3030
Price
$139.67
FOR BECKETT BURNER MODEL S
SOLID STATE 3-WIRE IGNITER
FITS: OLD STYLE INTERTHERM
FITS: INTERTHERM AND COLEMAN
Part Number 1-3026
Price
$139.67
Part Number 1-3032
Price
$39.00
FOR WAYNE BURNER MODEL E
ELECTRONIC IGNITER
FITS: DUO THERM
2-Wire FITS NEW STYLE INTERTHERM BECKET BURNER INTERUPTED IGNITION
Part Number 1-3027
Price
$139.67
Part Number 1-6219430
FOR WAYNE BURNER MODELS M AND MH
UNIVERSAL TRANSFORMER COM-PAK 3 POSITION TERMINAL
FITS: COLEMAN AND MILLER Part Number 1-3028
Base furnished is multiple tapped to fit most replacement mounting plates.
Price
$139.67 Part Number 1-3031
FOR WHITE RODGERS NU-WAY BURNER MODELS 7002 AND 7027 FITS: COLEMAN AND MILLER Part Number 1-3029
(336) 744-9071 Winston-Salem, NC
Price
$146.85
Price
$139.67
Price
$99.00
We are one of the oldest Nordyne, Intertherm Brand Distributors in the Nation.
Page 18
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Intermittent Ignition
Interrupted Ignition
HONEYWELL ELECTRONIC PRIMARY CONTROL Interrupted Ignition
WHITE RODGERS PRIMARY CONTROL Intermittent Ignition 3-WIRE PRIMARY
Part Number 1-669-443 1-669-443-3
Description 1 to 3 3 & up
This R7184A1075 interrupted type oil primary is a 4-wire control for residential oil fired burners. 10 fla and 60 lra rated contacts. Lockout is factory set at 15 seconds. This control is to be used with a solid state interrupted type transformer. Was used on Intertherm and Miller brand M1 & CMF series oil furnaces with Becket burners from 3-23-01until 6-28-04.
Price
$170.33 $64.00
Intermittent or Interrupted Ignition
HONEYWELL UNIVERSAL DIGITAL PRIMARY CONTROL R7284U1004
Part Number 1-6246290
This 6-wire (plus 2-wire cad cell) electronic primary control replaces many of the earlier model Honeywell primaries such as the R8184G, R4184G & R7184A. Has many more features than the primaries it replaces. Has field adjustable safety switch timing of 15, 30 or 45 seconds. Has field adjustable oil solenoid valve on-off & blower on-off (prepurge & post purge) delays. May be programmed for constant (intermittent) or interrupted (transformer shuts off after fire ignites) ignition. Programming & trouble shooting is done on a digital LED screen located on the front of control. May be used on oil burners used in forced air systems, boilers and water heaters. Uses same cad cell as old style primaries. 120 vac, 60 Ira, 10 fla. 5-year limited warranty. Part Number 1-R7284U 1-R7284U-3
(336) 744-9071 Winston-Salem, NC
Price
$79.00
HONEYWELL ELECTRONIC PRIMARY CONTROL Interrupted Ignition This R7184B1032 primary is an 8-wire control for oil fired burners with 15 sec. prepurge features. Has 15 sec. factory preset lockout. Must be used with oil pumps with “clean-cut” technology. Used on all Intertherm and Miller M1 & CMF series oil furnaces with Beckett burners after 628-04. Part Number 1-6246470
Price
$72.00
What is “clean-cut” technology? Fuel pump has built-in solenoid valve that opens up after 15 seconds of run time to allow purging of combustion chamber. Rapid shut-off of the solenoid valve also prevents burner afterburn which eliminates fumes & soot build-up.
Price
$98.00 $79.00
We stock repair parts for Coleman/Evcon Heating-Cooling products.
Page 19
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
CAD CELLS KIT INCLUDES: MOUNTING BRACKETS, 30" LEAD WIRE, & CAD CELL.
HONEYWELL CAD CELL Part Number 1-6606030 1-780-230
Description Assembly CAD CELL ONLY
Price
$19.69 $5.98
We are the Largest Authorized Distributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the East Coast.
WHITE RODGERS CAD CELL
Part Number 1-6606020 1-780-229
Description Assembly CAD CELL ONLY
Price
$15.69 $4.98
FIBERFAX ASBESTOS FREE ROPE A twisted 3-ply rope manufactured from Fiberfax wicking. For use in and around furnaces and boilers. 3/8" Dia. Sold per Foot. Part Number 1-3060
Price
$1.29
We stock repair parts for Coleman/Evcon Heating-Cooling products.
We are one of the oldest Nordyne, Intertherm Brand Distributors in the Nation.
DRAFT HEADS Cap is made of galvanized steel and the pipe thimble is stainless steel.
Part Number 1-3055 1-3056
Description 4" PIPE 5" PIPE
(336) 744-9071 Winston-Salem, NC
Price
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and Heat Pump Parts.
$27.69 $27.69
Page 20
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
MOC/CMF Series
Intertherm Flue Cap Assembly
FLUE CAP ASSEMBLY FOR NEW STYLE INTERTHERM FLUES
FLUE ASSEMBLIES These flues do not have combustion air cavities, therefore, they are to be used where combustion air is drawn from under the home.
Exterior is made of galvanized steel and the flue pipe is made of heavy gauge galv. aluminum. Includes top cap, lower cap and base.
NOTE: 5 in. diameter flues are no longer available in this category/style. Part Number 1-104060000
1-104060018
Description 4" DIA. FLUE PIPE OPENING. 12 in. from roof flange to bottom of flue. 28 in. overall length. Outside diameter is 10 in. 4" DIA. FLUE PIPE OPENING. 48 in. from roof flange to bottom of flue. 62 in. overall length. Outside diameter is 10 in.
Price
$124.00 $236.00
Part Number 1-9036570
Price
$83.91
Intertherm Flue Assemblies
FLUE ASSEMBLIES by INTERTHERM
Coleman/Evcon All listed flues have combustion air capability. The flue assembly is made of heavy galvanized steel except for the inside pipe which is made of galvaluminum that will not rust. The inside pipe is five inches in diameter with an eight inch outer pipe. Fits all M-series oil and gas furnaces by Intertherm and Miller.
FLUE ASSEMBLIES by COLEMAN/EVCON All Coleman/Evcon flues are 5 in. diameter. All listed flues have combustion air capability. Part Number 1-9036580 Part Number 1-4000-7121 1-4000-7141 1-4000-8181 1-4000-5441/C 1-7900-2911
Description 91" to 102" FLOOR TO FLANGE 99" to 120" FLOOR TO FLANGE 115" to 145" FLOOR TO FLANGE TOP CAP ASSEMBLY RAIN CAP
Price
$145.00 $169.00 $198.00 $48.48 $27.63
1-9036600
1-9036640
Coleman/Evcon Crown Assembly
CROWN ASSEMBLY FOR COLEMAN FLUES 1-9036660
Fits 4000, 800 and 900 series Coleman flue assemblies. Includes top cap, lower cap and crown base. Made of galvanized steel.
Description 5" DIAMETER PIPE TELESCOPING FLUE ASSEMBLY. Extends from 15"min. to 23" max. measuring from flange to furnace. Use with oil or gas. Flat flange. 5" DIAMETER PIPE TELESCOPING FLUE ASSEMBLY. Extends from 27" min to 47" max. measuring from roof flange to furnace. Use with oil or gas. Flat flange. 5" DIA. PIPE TELESCOPING FLUE ASSEMBLY. Extends from 35" min. to 63" max. measuring from roof flange to furnace. For oil or gas. Slope flange will flex from 3/12 pitch to 5/12 pitch. 5" DIAMETER PIPE TELESCOPING FLUE ASSEMBLY. Extends from 51" min. to 95" max. measuring from roof flange to furnace. For use with oil or gas. Slope flange will flex from 3/12 pitch to 5/12 pitch.
Price
$112.00
$145.00
$186.00
$276.00
TOP CAP for FIREPLACE
Part Number 1-4000-6941
Cap is made of galvanized steel and is 15-1/2" diameter, outer pipe is 12-3/4"diameter. Fits 8" diameter flue pipe. Overall height of assembly is 15". Thimble that fits over flue pipe is made of stainless steel.
Price
$122.01 Part Number 1-5555850
(336) 744-9071 Winston-Salem, NC
Page 21
Price
$54.75
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
METAL FILTERS FOR NORDYNE “A” COILS (Intertherm & Miller brands)
FILTERS Disposable Poly-Fiber Media
Part Number 1-9113280 1-9113290 1-9177630
Part Number 1-3100 1-3101 1-3102 1-3103 1-3104 1-3105 1-3118 1-3106 1-3107 1-3108 1-3109 1-3117 1-3111 1-3112 1-3113 1-3114
Description 10" x 20" x 1" 12" x 24" x 1" 16" x 16" x 1" 18" x 18" x 1" 20" x 20" x 1" 20" x 22-1/4" x 1" 20" x 24" x 1" 20" x 25" x 1" 18" x 20" x 1" 12" x 20" x 1" 14" x 24" x 1" 14" x 25" x 1" 15" x 20" x 1" 16" x 25" x 1" 14" x 20" x 1" 16" x 20" x 1"
Price
$2.39 $2.19 $2.59 $2.99 $2.29 $4.49 $3.24 $2.49 $2.98 $2.49 $2.49 $2.39 $2.29 $2.29 $2.49 $2.29
1-9145680 1-9177630 1-9177630 1-9217880 1-9217840
Part Number 1-9177630 1-95205400
Price
FOAM FILTERS Washable
1-3210
1-6690750 1-6689180
1-6690730
1-6690730 1-6694050
$17.35 $20.99 $17.35 $17.35 $15.98 $36.49
Description CM4Q(B)53-U & 54-U A-COIL (Two Aluminum Filters (16" x 19")) MORTEX A-COIL FILTERS, FOAM 2 per set, 18" long x 16-1/2" wide (Use 1-6684110 Metal Filters)
Price
$17.35 $0.00
This unique patent-pending PURACLEAN filter spray creates a passive, electrostatic filter surface with an increase of up to 300% in particle capture. Improves the performance of any type of filter. Excellent for high and medium velocity equipment. Improves the efficiency of nonelectrostatic filters by as much as 65%. Ozone safe.
$1.98
Description EZE TRIM FILTER, FOAM 15-1/2" x 24" x 1/4" EZE TRIM FILTER, FOAM 16" x 24" x 1/4", (Has 3" square plastic grids to help maintain shape). FILTER ONLY 20" Wide x 53" Long, FITS: MSH SERIES. FILTER ONLY, (SACK TYPE) 17-1/2" Wide x 54" Long, FITS: MAC SERIES OIL, GAS & ELECTRIC. FILTER ONLY 26-1/2" Wide x 16-1/8" Long, FITS: MOC, MGC & CMF SERIES. FILTER ONLY FITS: MMG SERIES, USE 1-6690730 AND CUT TO LENGTH. FILTER RETAINER WIRE FRAME, FITS: MOC, MGC, AGC & CMF.
$21.65
FILTER SPRAY by QWIK PRODUCTS
WILL CUT TO SIZE, SOLD PER FOOT 25” Wide x 30” Long x 1” Thick
Part Number 1-3110
Price
$17.89
MORTEX A-COIL FILTERS Washable
ROLL HOG HAIR FILTER Washable Part Number 1-3116
Description C1 & C2QA024 thru 042 COILS, Requires 2 (16-3/4" x 19") (1/pkg.) C1 & C2QA048 COIL (2/pkg.), (16-3/4" x 23"). C3QA024 thru 047 & 055 (2/pkg.) (16" x 19") C3QA048 ONLY (2/pkg.) (16" x 23") C5Q(D)AX025U-B thru 036 (2/pkg.) (16" x 19") C5Q(D)AT025U-B thru 036 (2/pkg.) (16" x 19") C8Q(B)AM24U-B thru 36U-B (Two Aluminum Filters, 15" x 17") REPLCOIL02M 2 THRU 4.5 TON (2/pkg), Fits 18" High Coils; Includes 2 aluminum filters and filter brackets.
Price
$1.98 $5.98
Part Number 1-3121
Price
$11.98
$36.52 $25.72 $5.98 $5.98 $17.16
WASHABLE METAL FILTERS Part Number 1-6682230 1-6683030
Description FILTER, 16" x 23-1/2", PERMANENT FILTER, 14" x 32", PERMANENT
(336) 744-9071 Winston-Salem, NC
Price
$22.42 $44.16
Page 22
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Metal Long
Plastic
DECORATOR REGISTERS by WITTEN
METAL FLOOR REGISTERS WITH SCREW HOLES Part Number 1-3224W
Description
Call Size Face Size
WHITE
2 x 12
1-3225W
WHITE
4x8
1-3226W
WHITE
4 x 10
1-3227W
WHITE
4 x 12
1-3224
BROWN
2 x 12
1-3225
BROWN
4x8
1-3226
BROWN
4 x 10
1-3227
BROWN
4 x 12
3-23/32x 13-15/16 5-3/8 x 10-1/4 5-3/8 x 12-1/4 5-3/8 x 14-1/4 3-23/32x 13-15/16 5-3/8 x 10-1/4 5-3/8 x 12-1/4 5-3/8 x 14-1/4
Price
$4.98 Part Number 1-3300
Description
Call Size Face Size
SNOW WHITE
4x8
$5.98
1-3304
SNOW WHITE
4 x 10
$4.98
1-3301
BONE WHITE
4x8
$4.59
1-3305
BONE WHITE
4 x 10
$4.98
1-3302
ALMOND
4x8
$5.98
1-3306
ALMOND
4 x 10
1-3303
TAN
4x8
1-3307
TAN
4 x 10
1-3312
TAN
4 x 12
1-3308
ROSE
4x8
1-3310
ROSE
4 x 10
1-3309
BLUE
4x8
1-3311
BLUE
4 x 10
1-3313
GREEN
4x8
$4.59 $4.98
Metal Short
METAL FLOOR REGISTERS WITH SCREW HOLES Part Number 1-3220W
Description
Call Size Face Size
WHITE
4x8
1-3221W
WHITE
4 x 10
1-3220
BROWN
4x8
1-3221
BROWN
4 x 10
5-3/8 x 9-1/4 5-3/8 x 11-3/4 5-3/8 x 9-1/4 5-3/8 x 11-1/4
Made of high impact space age plastic. This revolutionary E-Z slider design allows control of air flow from wide open to completely closed. Does not have screw holes. One year limited warranty.
Price
$4.27 $4.49 $4.27
5-1/4 x 9-1/4 5-1/4 x 11-1/4 5-1/4 x 9-1/4 5-1/4 x 11-1/4 5-1/4 x 9-1/4 5-1/4 x 11-1/4 5-1/4 x 9-1/4 5-1/4 x 11-1/4 5-1/4 x 13-1/4 5-1/4 x 9-1/4 5-1/4 x 11-1/4 5-1/4 x 9-1/4 5-1/4 x 11-1/4 5-1/4 x 11-1/4
Price
$4.98 $4.98 $4.98 $4.98 $4.98 $4.98 $4.98 $4.98 $5.95 $5.95 $5.95 $5.95 $5.95 $5.95
$4.49
Metal Square
METAL FLOOR REGISTERS WITH SCREW HOLES Part Number 1-3228
Description
Call Size Face Size
BROWN
6x6
(336) 744-9071 Winston-Salem, NC
7-3/8 x 7-3/8
Price
$12.98
Page 23
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
Metal With No Screws
RETURN AIR GRILL
METAL FLOOR REGISTERS WITHOUT SCREW HOLES All these registers discharge the air completely vertical, no side to side discharge. Part Number 1-3201
Description
Call Size Face Size
BROWN
4x8
1-3202
BROWN
4 x 10
1-3203
BROWN
4 x 12
1-3201W
WHITE
4x8
1-3202W
WHITE
4 x 10
1-3203W
WHITE
4 x 12
5-3/8 x 9-3/8 5-3/8 x 11-3/8 5-3/8 x 13-3/8 5-3/8 x 9-3/8 5-3/8 x 11-3/8 5-3/8 x 13-3/8
Price
All metal construction with large easy to clean fins that sweep back twenty-two degrees to conceal opening behind grille. White painted finish. Part Number 1-3239
Description 10" x 4"
Price
$4.59
$4.49 $4.29 $5.98 $4.49 $4.29 $5.98
Heating Only
FLOOR REGISTERS Heating Only Made of Metal The fins on these registers are bent out towards each end starting in the middle of the register. This fin configuration causes the discharge air to blow out towards each end of the register and low to the floor. Since heated air is lighter than the surrounding air it will float up towards the ceiling. This type of airflow configuration will keep the floor warm as well as the rest of the room. Description Part Number 1-3225HB BROWN
Call Size Opening Face Size Size
1-3226HB BROWN
4 x 10
4x8
3-3/4 x 7-3/4 3-3/4 x 9-3/4
5-1/2 x 9-1/2 5-1/2 x 11-1/2
Price
$5.79 $5.49
For Floor Registers
PAINTED SCREWS FOR FLOOR REGISTERS
Part Number 4-2583B 4-2583W
Description #8 x 1.5" Brown #8 x 1" White BROWN IS SQ. HEAD
Price
$0.08 $0.10 WHITE IS PHILLIPS HEAD
(336) 744-9071 Winston-Salem, NC
Page 24
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
RETURN AIR FLOOR GRILLES
SIDEWALL/CEILING SUPPLY DIFFUSERS Adjustable Face Bars
These steel floor grilles are heavy duty enough to support several hundred pounds of weight. Bakedon brown paint. Part Number Description
Opening Size
1-3235 1-3236 1-3237
14" x 14" 12" x 20" 14" x 20"
16" x 16" 14" x 22" 16" x 22"
Price
$39.95 $39.98 $45.95
FILTER GRILL Return Air All steel construction with large easy to clean fins that sweep back twenty-two degrees to conceal air filter. For sidewall or ceiling use. One piece heavy steel louvered face is hinged for easy access to air filter. Accepts one inch thick air filters. White painted finish. Part Number 1-3230 1-3232 1-3233 1-3234 1-3238
Description 16" x 20" 16" x 25" 20" x 20" 20" x 25" 25" x 20"
This white metal diffuser has adjustable roll-formed face bars with 3/4” spacing for easy adjustment. Has single deflection adjustable multishutter dampers with positive shutoff when closed. Has two 3-16” diameter mounting holes. Comes with white mounting screws. Part Number 1-3369
Description
Call Size Face Size
WHITE
8" x 4"
1-3370
WHITE
10" x 4"
$14.49 $14.59
Note: All measurements are width x height
AIR DEFLECTOR For Floor, Sidewall and Ceiling Registers Magnetic Mount, extends from 8” to 14” in length, made of clear plastic, great for heating and/or cooling. Directs the air to where it heats or cools the best.
Price
$28.98 $33.69 $25.59 $31.98 $31.98
9-3/8" x 5-3/8" 11-3/8" x 5-3/8"
Price
Part Number 1-3340
Price
$2.49
RETURN AIR GRILL All metal construction with large easy to clean fins that sweep back twenty-two degrees to conceal opening behind grille. White painted finish. Part Number 1-3239 1-3240 1-3359 1-3360 1-3362 1-3364
Description 10" x 4" 14" x 8" 14" x 14" 16" x 16" 20" x 20" 20" x 25"
(336) 744-9071 Winston-Salem, NC
Price
$4.59 $5.98 $14.98 $15.69 $23.69 $32.95
Page 25
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
HEAT-COOL THERMOSTAT by ROBERTSHAW (Manuel Changeover) This top of the line, high quality thermostat has a SPDT hermetically sealed-in-glass switch to protect it from arcing and to seal out dust and moisture. Adjustable heat anticipator setting from .18 to 1.0 amps. Ideal for controlling all heating-cooling systems with 24 VAC control systems up to 1.5 amp max. The segregated circuit sub-base has heat, cool, off positions with fan on-auto positions. Temperature settings range from 48 deg. F to 86 deg. F. Has thermometer on face of thermostat.
HEAT-COOL THERMOSTAT by ROBERTSHAW Designer White This 24 volt single stage heat, single stage cool thermostat has its contacts sealed in a glass bulb to prevent arcing. The internal fan jumper plug feature allows the installer to adjust the fan delay for greater system compatibility. The fan jumper plug is set at the factory in the “G” position to allow a natural fan delay during the heating mode. If the heating system requires the fan to come on immediately on start-up, you must remove the jumper plug and reinstall it in the “E” position. When two transformers are used, remove the factory installed jumper between Rc and Rh. Has adjustable heat anticipator settings from .2 to 1.6 amps. Cooling anticipator setting is fixed at 4700 ohms. To power a damper motor or auxiliary circuit that requires continuous power, “O” and “B” terminals are provided. Temperature range from 50 degree f. to 90 degree f. Has heat-off-cool system settings and fan on-off settings. Has thermometer built into thermostat cover. May be used with a single stage heat pump system. May use with oil, gas or electric furnaces. Part Number 1-9148390
Part Number 1-6242920
HEAT-COOL THERMOSTAT by GENERAL ELECTRIC (Manuel Change-over) Thermostat provides 24 volt control of 1-stage heat and 1-stage cooling in control circuits up to 1.5 amps, and in systems that requires the indoor fan circuit (G terminal) to be energized in the heating mode. Contacts are sealed in a glass tube. Provides heat, off, cool system switching, with fan auto-on control. Adjustable heat anticipator from .18 to 1.0 amps. Has Trane logo on cover. Thermometer on cover.
Price
$43.13
HEAT-COOL THERMOSTAT by HONEYWELL “The Round One”
USED ON TRANE’S BWE, BEV, & TEV SERIES Part Number 1-BAYSTAT305
This T87F round thermostat is designed for low voltage control of oil, gas or electric furnaces. Must use with sub-base. Part Number 1-9127450
Price
$20.00
HEATING THERMOSTAT 24 Volt 2-Wire White-Rodgers
Price
$52.36
This two wire, snap action contact, 24 volt heat only wall thermostat has a positive off feature at approximately 45degree F. Adjustable heat anticipator setting is from .15 to 1.2 amps. May be used on oil, gas and electric furnaces. White body.
SUB-BASE by HONEYWELL This sub-base for use with the T87F thermostat. Has cool, heat, and off positions with fan onauto positions. Part Number 1-9129340 1-9179230
Price
$39.00
Description SINGLE TRANSFORMER HTG-CLG INDEPENDENT HTG-CLG CIRCUITS
(336) 744-9071 Winston-Salem, NC
Part Number 1-9180820
Price
$18.45
Price
$39.90 $36.24
Page 26
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
HEAT PUMP THERMOSTAT by HONEYWELL (Manual Changeover) Thermostat provides 24 volt control of 2-stage heating, 1-stage cooling of heat pump systems which energizes the reversing valve in cooling mode. Provides Em. Ht., heat, off, and cool system switching and auto-on fan control. Has Emt. heat and Aux. heat lights on base. Temperature range is from 50 deg. F. to 80 deg. F. Has fixed anticipation on all stages. Has thermometer on front cover. Intertherm logo on cover.
HEAT PUMP THERMOSTAT by GENERAL ELECTRIC (Manual change-over) This thermostat has much the same design and specifications as the 3600-3671 thermostat, but, does not have Aux. heat light, and has fixed anticipation on all stages. USED ON COLEMAN/EVCON HEAT PUMP MODELS: 3300A, 3200-3200D, 3360-601, 3400, 6000, AND 6500 SERIES HEAT PUMPS.
USED ON NORDYNE’S “T” SERIES Part Number 1-9129300
Price
$76.62
Part Number 1-3300-377P
HEAT PUMP THERMOSTAT by UTEC Digital Manuel Change-Over
HEAT PUMP THERMOSTAT FOR COLEMAN/EVCON By GENERAL ELECTRIC (Manual change-over) Thermostat provides 24 volt control of 2-stage heating, 1-stage cooling of heat pump systems. Has heat, off, cool, and Em. heat system switching and auto-on fan switching. Has Aux. Heat & Em. Heat lights. Temperature range is from 50 deg. F. to 90 deg. F. Has adjustable anticipation on first stage of heat only, .18 to 1.0 amp. Has thermometer on cover. USED ON COLEMAN/EVCON 3600 SERIES Part Number 1-3600-367P
Price
$163.42
Price
$79.00
This is a wall mount, low voltage 2-stage heat, 1-stage cool heat pump thermostat that energizes the reversing valve in the cooling mode. Thermostat requires no batteries, is not a power stealing device and must have both R and C wires connected. Temperature and mode settings are preserved with the power off. System selections are off, heat, cool and emergency heat, continuous fan or fan off. There is a built-in 5 minute time-delay once system has shut down before it will restart. This feature can be overridden one cycle at a time. A cycle timer allows for four cycles per hour or one cycle every fifteen minutes. Once the system starts it will remain on for three minutes regardless of demand, however, a change in set point or mode will shut the system down. There is a fifteen minute delay between first and second stage operation, however, if there is a heating demand greater than five degrees there is only a three minute delay between first and second stage. Room temperature is constantly displayed on LCD until a change in mode of operation or temperature is activated, display will change back to indicate room temperature if no buttons are pushed in five seconds. This is an incredible device for the money. Part Number 1-9174330
(336) 744-9071 Winston-Salem, NC
Page 27
Price
$70.06
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
HEAT PUMP THERMOSTAT by GENERAL ELECTRIC (Manual change-over) Thermostat provides 24 volt control of 2-stage heating and 1-stage cooling of heat pump systems that energizes the reversing valve in cooling mode. Provides Em. Ht., heat, off, cool system switching, and auto-on fan control. Has Aux. Ht. light and Em. Ht. light on control panel. Temperature range is from 50 deg. F. to 90 deg. F. Has fixed anticipation all stages. Has thermometer on front cover. Trane logo on cover. Part Number 1-BAYSTAT239
Price
$65.00
UNIVERSAL THERMOCOUPLES Replaces all common thermocouples. Copper tube body. Adapters included.
Part Number 1-3125 1-3126 1-3127 1-3128 1-3129
Description 18" 24" 30" 36" 48"
Price
$5.79 $5.39 $5.98 $6.59 $8.69
THERMOSTAT WIRE Part Number 1-3133 1-3136 1-3135
We are the Largest Authorized Distributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the East Coast.
Description 20-3, PER FT., 500 FT/ROLL. 20-5, PER FT., 250 FT/ROLL. 20-8, PER FT., 250 FT/ROLL.
(336) 744-9071 Winston-Salem, NC
Price
We stock repair parts for Coleman/Evcon Heating-Cooling products.
We are one of the oldest Nordyne, Intertherm Brand Distributors in the Nation.
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and Heat Pump Parts.
$0.15 $0.26 $0.35
Page 28
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
AIR CONDITIONER PADS
REFRIGERANT LINESETS 1/2" Thick Insulation
Solid 2” Thick Pre-Cast Concrete Part Number 1-24241 1-30301 1-32321 1-36361 1-36481 1-42641
Description 24" x 24" x 2" 30" x 30" x 2" 32" x 32" x 2" 36" x 36" x 2" 36" x 48" x 2" 42" x 64" x 2"
Price
$17.20
$32.00 $55.00
AIR CONDITIONER PADS by PolyVule “The Black Pad”
Description 24" x 24" x 2" 32" x 32" x 2"
Part Number 1-3508 1-3510 1-3514 1-3511 1-3512 1-3516
Description 20' Long - 3/8" & 3/4" 30' Long - 3/8" & 3/4" 30' Long - 3/8" & 7/8" 40' Long - 3/8" & 3/4" 50' Long - 3/8" & 3/4" 50' Long - 3/8" & 7/8"
Price
1-3/4" x 300 FT. 1-3/4" wide fabric hanger strap is ideal for hanging flexible duct. Has 440 lb. tensile strength. Black color. Part Number 1-3275
Price
$9.98
$14.98 $29.95
CARTRIDGE FUSES Time Delay
AIR CONDITIONER PADS Cladlite
250 Volt AC - HAC-R Rated Non-Renewable Element
This pad has the appearance and performance of real concrete at 20% of the weight of conventional concrete pads. The cladding provides superior resistance to sun, moisture and freezethaw conditions. The polystyrene is virtually impervious to water, soil conditions, fungus and bacteria. Stocked in 2” thick pad only. Part Number 1-32323
Description 32" x 32" x 2"
Part Number 1-3241 1-3242 1-3243 1-3244 1-3245
Price
Description 3" x 3"x 7/8"
(336) 744-9071 Winston-Salem, NC
Price
$2.98 $4.98 $4.98 $4.98 $4.98
Heavy duty water based foaming coil and fin cleaner. The powerful foaming blast cleans and degreases air conditioning and refrigeration condenser & evaporator coils. Contains no solvents, acids or alkalies. Safe for aluminum fins and copper coils. Does not use any CFC’s. 18 Oz. net weight.
$34.00
Has a solid cross-ribbed design with a cork center. Made of high quality elastomeric materials compounded for excellent resistance to aging, compression set and oil. Maximum loading capacity: 50 lbs. per square inch. Total thickness is 7/8". Excellent for use between air conditioner and concrete pad to reduce noise and vibrations.
Description 30 AMP 35 AMP 40 AMP 50 AMP 60 AMP
COIL CLEANER Foaming Spray
ANTI-VIBRATION PAD
Part Number 1-3040
Price
$127.12 $166.00 $201.00 $221.00 $269.00 $330.00
HANGER STRAP FABRIC
Made from recycled automobile tires and recycled plastics. Quiet, absorbs 60% more vibration than plastic pads. Resists breakage and is UV stable. Strong, more durable than concrete and is light weight. Limited lifetime warranty. Part Number 1-24242 1-32322
Plain Ends
Part Number 1-3270
Price
$6.98
Price
$1.29
Page 29
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
REPLACEMENT MOTORS for BLOWER ASSEMBLIES used on OIL, GAS & ELECTRIC FURNACES Part Number Description 1-9006310
1-6206980
1-9018380 1-9012950 1-9018380 1-9012950
1-9018380
1-9018730 1-6206980
1-9006310
1-6206980 1-9018750
1-9127910
1-6216420
1-9018750
1-9127910
1-9030960
1-9030760
1-9030750
1-9006310
BLOWER ASSEMBLY (2 thru 4 tons) Coleman’s 7600, 7600A, 7700 & 7700A series gas furnaces BLOWER ASSEMBLY (2 thru 4 tons) Coleman’s 7600, 7600A, 7700 & 7700A series gas furnaces BLOWER ASSEMBLY BLOWER ASSEMBLY BLOWER ASSEMBLY BLOWER ASSEMBLY (2 thru 4 tons) Intertherm’s FE series electric furnace and Coleman’s 3400 & 3500 series electric furnace BLOWER ASSEMBLY (2 thru 4 tons) Intertherm’s FE series electric furnace and Coleman’s 3400 & 3500 series electric furnace BLOWER ASSEMBLY BLOWER ASSEMBLY (2 thru 4 tons) Coleman/Evcon 7600B 7700B & 7900 series BLOWER ASSEMBLY (2 thru 4 tons) Coleman/Evcon 7600B 7700B & 7900 series BLOWER ASSEMBLY BLOWER ASSEMBLY (2 thru 3.5 tons) Intertherm’s MSH & MGH series furnaces with an “A” in the model number. Also fits Coleman/Evcon 7900 series BLOWER ASSEMBLY (2 thru 4 tons) Intertherm’s MMB, MSH & MGH series furnaces with an “A” in the model number. Also fits Coleman/Evcon 7900 series BLOWER ASSEMBLY (2 thru 4 tons) Intertherm’s E1 series electric furnaces BLOWER ASSEMBLY (2 thru 3.5 tons) Intertherm’s MG, MS, MB & MM series with an “A” in the model number BLOWER ASSEMBLY (2 thru 4 tons) Intertherm’s MG, MS, MB & MM series with an “A” in the model number BLOWER ASSEMBLY (2 thru 5 tons) Intertherm E2 & E3 series electric furnaces 1/5 HP BLOWER ASSEMBLY (2 thru 4 tons) Intertherm E2 & E3 electric furnaces 1/3 HP BLOWER ASSEMBLY (2 thru 4 tons) Intertherm E2 & E3 electric furnaces BLOWER ASSEMBLY
(336) 744-9071 Winston-Salem, NC
Blower Number
Price
BLOWER ASSEMBLY (2 THRU 4 TONS) Intertherm’s MSH & MGH series furnaces without an “A” in the model number BLOWER ASSEMBLY (2 thru 4 1-9034330 tons) Intertherm’s M1 series oil and gas furnaces BLOWER ASSEMBLY (2 thru 5 1-9034340 tons) Intertherm’s M1 series oil and gas furnaces BLOWER ASSEMBLY (2 thru 4 1-505261 tons) Adaptable to several models & brands of electric furnaces. Motor specifications: 1/2hp, 230v, 3-spd, 1075 rpm 3. amp, cw rotation looking at shaft, 10 mfd capacitor, 3-mounting brackets. GE# 5KCP39JGR433 S. 1-1468-120P BLOWER ASSEMBLY (Heating Only) Colemans 3500 and 3500A series electric furnaces. 1-024-24504-7 BLOWER ASSEMBLY (AC OR 00 Heat Pump, up to 4 ton) Coleman's 3500 and 3500A series electric furnaces. 1-024-27651-0 BLOWER ASSEMBLY (AC OR 00 Heat Pump, up to 4 ton) Coleman's 3500, 3500A, EBxxA and EBxxB series electric furnaces.
911030
$239.70
903413
$306.16
903414
$209.95
ASPEN & MORTEX
$183.00
3500-5901
$188.68
3500-6901
$302.37
3500-6901 /A
$174.45
1-9006310
Blower Number
Price
900759
$239.70
900759
$264.93
900741 900923 900933 901282
Part Number Description
$240.10 $486.57 $240.10 $486.57
901282
$240.10
901410 901649
$179.51 $264.93
901649
$239.70
901680 901998
$264.93 $238.64
901999
$437.91
902805
$238.00
902809
$238.64
902810
$437.91
902985
$302.89
We stock repair parts for Coleman/Evcon Heating-Cooling products. We are one of the oldest Nordyne, Intertherm Brand Distributors in the Nation.
$207.78 902993
$234.17
910183
$239.70
Page 30
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
CHIMNEY PIPE WOOD BURNING FIREPLACES
FLEXIBLE DUCT For outdoor low and medium pressure systems. Has steel wire helix. Thick fiberglass insulation. Designed for mobile home use. Has heavy one-piece black outer vinyl cover. Sold per ft. in 25 ft. lengths. Part Number 1-3258 1-3259 1-3260 1-3261
Description 10" x 1’ 12" x 1’ 14" x 1’ 16" x 1’
$2.19 $2.36 $2.70 $2.99
Part Number 1-3263 1-3264 1-3265
Description 10" x 1’ 12" x 1’ 14" x 1’
$2.19 $3.40 $3.98
The interior pipe is 8 inches diameter and is made of stainless steel, outside pipe is 12-1/2 inches diameter and is made of galvanized steel. Has centering tabs on one end to ensure that inner pipe remains the proper distance from the outside pipe.
Price Part Number 1-2915-18 1-2915-24 1-2915-36
Price
STORM COLLAR FIREPLACE FLASHING
Part Number 1-2920
DUCT TIES HEAVY DUTY NYLON
Made of heavy gauge galvanized steel. For roofs with a pitch of 06/12. For 12-1/2" diameter pipe size. Price
$0.59 $0.79
Part Number 1-2922
Cap is made of galvanized steel and is 15-1/2" diameter, outer pipe is 12-3/4" diameter. Fits 8" diameter flu pipe. Overall height of assembly is 15 inches. Thimble that fits over 8" flue pipe is made of stainless steel.
Made of light weight metal. Comes broken down (flat), simply cut to desired height, fold and secure tabs when ready to use.
1-2869 1-2870 1-2871 1-2873 1-2874
Description ALUMINUM 4" Wide x 8" Long x 6" High 4" Wide x 10" Long x 8" High 4" Wide x 12" Long x 8" High GALVANIZED STEEL 4" Wide x 8" Long x 6" High 4" Wide x 10" Long x 6" High
(336) 744-9071 Winston-Salem, NC
Price
$39.00
TOP CAP ASSEMBLY FIREPLACE CHIMNEY
DUCT TO REGISTER CONNECTORS
Part Number
Price
$13.98
FLASHING FIREPLACE CHIMNEY
175 lb. tensile strength. Self-locking.
Description 6" DIAMETER THRU 10" DIAMETER 12" DIAMETER THRU 14" DIAMETER
Price
$43.00 $69.00 $89.00
Made of galvanized steel for 12-1/2" diameter chimney pipe.
NOTE: Duct with R-6 insulation must be used for crossover connections where the duct is exposed below the vapor barrier. All package units must use duct with R-6 insulation, any part of the duct that is outside the curtain wall (underpinning) must have R-8 insulation.
Part Number 1-3272 1-3273
Description 18" LONG (17-1/2" Actual length) 24" LONG (23-1/4" Actual Length) 36" LONG (35-1/2" Actual length)
Price
Part Number 1-5555850
$3.49 $3.98 $5.15
Price
$54.75
$2.67 $2.69
Page 31
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
METAL STARTING COLLARS FOR FIBER BOARD Galvanized Steel Approximately 4" Long
METAL CONNECTING COLLARS GALVANIZED STEEL APPROXIMATELY 6" LONG
For use with fiberboard duct. Part Number 1-3278 1-3279
Description 10" DIA. 12" DIA.
Price
$4.39 $4.98
METAL REDUCER Galvanized Steel
Part Number 1-3297 1-3298 1-3299
Description 10" DIA. 12" DIA. 14" DIA.
Price
$2.19 $3.49 $5.69
V-BOX Top of box is 14-1/2" x 14-1/2". Has round duct collars each side of “V”. Has 1/2" thick duct liner glued to inside of galvanized metal to prevent sweating.
Part Number 1-3280 1-3281 1-3282 1-3283 1-3284 1-3285
Description 7" x 5" 7" x 6" 8" x 7" 10" x 8" 12" x 10" 14" x 12"
Price
$3.98 $3.79 $3.98 $0.00 $5.99 $8.95
METAL STARTING COLLARS Galvanized Steel For use with metal duct. Part Number 1-3286 1-3287 1-3288 1-3289 1-3290 1-3291 1-3292
Description 5" DIA. 6" DIA. 8" DIA. 10" DIA. 12" DIA. 14" DIA. 16" DIA.
(336) 744-9071 Winston-Salem, NC
Price
$1.49 $1.59 $2.29 $2.39 $3.98 $4.19 $6.98
Part Number 1-9019850 1-9021490
Description 10" DIA. COLLARS 12" DIA. COLLARS
Price
$62.11 $63.65
We are the Largest Authorized Distributor of Intertherm Brand Heating-Cooling Equipment Replacement Parts on the East Coast.
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and Heat Pump Parts.
Page 32
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
SINGLE WIDE SUPPLY / RETURN KIT Comes with one supply adapter that has a 9"wide x 13"long trunk duct opening and 12" round flex duct connector. It has a hinged close-off damper. Metal return box is 12" x 20" x6" deep with a 12" round or 14" oval flex duct connector. Has a washable 16" x 20" air filter. Has a brown heavy duty 12" x 20" floor grill. Part Number 1-3400 1-3401
Kit to connect packaged units to a single section home. (See items marked “3" in diagram). Includes: One 14" x 14" sq. x 12" dia. round return box with filter and grill. One supply adapter with 12" dia. round duct connection. Has automatic air damper.
Part Number 1-3405 1-3410
Description Supply Adapter Wye - 12 x 12 x 12
Price
$29.95 $26.85
SUPPLY ADAPTER GALVANIZED STEEL
Price
$48.00
Has 9"wide x 13"long trunk duct opening and a 12" round flex duct connector. Has a hinged automatic close-off damper.
DOUBLE WIDE KIT: Kit to connect packaged units to a double section home. (See items marked “3" in diagram). Includes: One 14" x 14" sq. x 12" dia. round return with filter and grill. Two supply adapters with 12" dia. round duct connection. Has automatic air dampers. Part Number 1-9114690
Price
$89.00 $89.00
DOUBLE WIDE KIT: To make a double wide kit add to the single wide kit one each of the following: Items listed below.
SINGLE WIDE KIT:
Part Number 1-9114680
Description 12" x 20" x 12" Round Kit 12" x 20" x 14" Oval Kit
Part Number 1-3405
Price
$29.95
WYES GALVANIZED STEEL
Price
$109.00
WYE Galvanized steel
Part Number 1-3407 1-3408 1-3409 1-3410
(See item marked “1" in diagram). 12" x12" x 12" wye with 2 metal worm gear type clamps. Part Number 1-9114700
(336) 744-9071 Winston-Salem, NC
Description 8" x 6" x 6" 10" x 8" x 8" 12" x 10" x 10" 12" x 12" x 12"
Price
$8.69 $8.98 $13.00 $26.85
Price
$38.29
Page 33
Toll Free Phone (800) 836-3627
*Prices are Subject to Change without Notice.*
COIL CABINET FOR M-SERIES GAS & OIL This coil cabinet is designed for counter flow (down-flow) gas & oil furnaces. 23-3/4" Deep with door in place. 20-1/2" Coil Area Depth. 19-3/4" Wide. 19" High Coil Area. Door is painted white to match furnace door. Part Number 1-9119690
Price
$115.00
Call 800-836-3627 for all your Intertherm and Miller Brand Air Conditioner, Furnace and Heat Pump Parts. We are one of the oldest Nordyne, Intertherm Brand Distributors in the Nation.
COIL CABINET FOR E-SERIES ELECTRIC This coil cabinet is designed to fit on top of a down-flow furnace and on the bottom of an up-flow furnace. 23-3/4" Deep. 20" Wide. 29" High. Door is painted white to match furnace door. Part Number 1-9029760
Price
$152.00
ATTIC VENT Roof Mount Galvanized steel attic vent operates on 115 volt AC and moves 100 CFM (cubic feet per minute) of air. Humidity and temperature controlled. Fan comes on when temperature reaches 105 degrees F or humidity reaches 70 percent RH. Fan goes off when temperature falls to 90 degrees F or 62 percent RH. May be mounted on a flat or slant roof. See diagram at left for dimensions. Roof cap is sold separately. Part Number 1-3430 1-3432
Description ATTIC VENT CAP ASSEMBLY
(336) 744-9071 Winston-Salem, NC
Price
$60.00 $23.39
Page 34
Toll Free Phone (800) 836-3627
