Newtec M6100

Transcript

- Description The Newtec M6100 Broadcast Satellite Modulator is the new At the output of the Broadcast generation DVB-S2, DVB-DSNG and DVB-S modulator specifically Satellite Modulator, the signal is designed for broadcast direct-to-home, primary distribution to available in IF or extended L-band headends and contribution of television and radio content. The (950 MHz-2150 MHz), providing M6100 can be used in conjunction with set-top boxes, professional a compact and cost effective IRD's or professional satellite demodulators such as the AZ910. solution. A switchable 10 MHz Delivering th e highest uptime for vital links BUC is multiplexed on the L-band Newtec's Next Generation Broadcast Satellite Modulator is not just a modulator. It's a platform that takes a vital role in your networks, performs the best on the market and helps you evolve your business through ongoing market and technology innovations. reference signal for an outdoor Uptime and reliability are essential in the interface. design of the modulator, taking a vital role in the satellite network. Input source redundancy, The Broadcast Satellite Modulator and the shortest redundancy switch-over times can be easily monitored and of modulators, operating both in 1+1 and N+ 1 controlled via a comprehensive topologies, are setting the standard in our industry. front panel menu, advanced web Advanced capabilities such as a built-in MPEG Transport Stream This enables easy integration into analyser, support of SMPTE 2022 FEC at the GbE inputs (for any industry-standard EMS/NMS system. Vital GUI as well as via SNMP protocol. distributed IP headends), and native support of Carrier ID according to the new DVB standard as well as in the transport Evolve towards tomorrow's technology stream NITTable. Built upon flexible and latest generation programmable technology, the M6100 Broadcast Get the best performance and lower your costs The Broadcast Satellite Modulator performs among the best offering unmatched bandwidth Perform Satellite Modulator is a future-proof building Evolve block that lets any satellite network evolve to the next level of capabilities. A scalable, pay-as-you- efficiency optimization options, thereby lowering grow, licensing and software upgrade mechanism facilitates the overall Total Cost of Ownership. The fully automated launch of new services, or last minute network design changes, operation of Newtec's field-proven Equalink8 without rebuilding the entire network infrastructure. Migration pre-distortion technology is now available for any from ASI to GbE and IF to L-band is facilitated by simple in-field satellite transmission application. Equalink pre-distortion provides installation of license keys. up to 10% bandwidth gains. The modulator also supports Clean Channel Technology™, the Additional capabilities such as DVB-S2 extensions and other first in a series extensions to DVB-S2, improving satellite efficiency are anticipated to become available on the platform as the by up to 15%, thereby enabling much smaller carrier spacing. standardization efforts materialise in the near future. The brand new DVB-CID is already available as a software option on the Newtec M6100 M6100. ewtec Newtec M6100 Broadcast Satellite Modulator Key features • • • • • • • • • DVB-S2 and DVB-DSNG/S compliant QPSK, 8PSK, 16APSK and 32APSK Baud rate range: 0,05 – 68 Mbaud Data rates up to 216 Mbit/s (dependent on configuration) Automatic TS rate adaptation Supports SFN Networks using transparent TS pass-through Exceptional jitter recovery on TS over IP inputs Built-in TS Analyser with PCR jitter measurements RFI reduction using optional DVB RF Carrier ID (DVB-CID) and NIT table CID (default) • Optional BISS Content protection • Optional opportunistic data insertion up to 20Mbps (MPE) • Optional redundant ASI transport stream interfaces • • • • • • • • • • • • • Optional redundant GbE interfaces with SMPTE 2022 FEC External reference input IF (70/140) and L-Band (950-2150) high power outputs L-band monitoring output Market leading RF purity and performance Programmable amplitude slope equalizer PRBS generator for link performance tests Optional high stability internal clock reference Optional 10 MHz reference output Optional Clean Channel TechnologyTM Optional automated linear and non linear Equalink® Pre-distortion Secure front panel, SNMP, HTTP and CLI interfaces Designed to support future DVB-S2 extensions Main advantages • • • • • • • • • • • Highest system reliability and service uptime through robust design and industry leading redundancy solutions Low TCO as a result of very high bandwidth efficiency technology options, and ease of monitoring and control Clean Channel Technology™ provides up to 15% bandwidth efficiency gains on top of the DVB-S2 standard Automated Equalink® pre-distortion provides up to 10% bandwidth gains, higher QoS and geographic coverage Built-in support for opportunistic data insertion, interoperable with IRD’s that support Multi Protocol Encapsulation (MPE) Easy integration with industry leading management systems (EMS/NMS/OSS) Safe investment as the platform supports advanced capabilities such as proMPEG FEC at the input, built-in transport stream analyzer and DVB & NIT Carrier ID Pay-as-you-grow flexible licensing scheme Platform prepared for future DVB-S2 extensions and other capabilities* Future-proof design combining video and IP multi-service capabilities, supports transport of today´s and tomorrow´s services Feature-based pricing and software upgrades *depending on the technical requirements in the future standards Applications Related products • Broadcast Direct-to-home (DTH) • Broadcast Primary Distribution • Broadcast Contribution AZ910 AZ410 AZ7x0 AZ212 AZ202 Support services for your professional equipment Care Pack Basic and Care Pack Enhanced are the Newtec service and support packages protecting your Newtec equipment over a three-year period. Satellite demodulator (works together with M6100 to perform automated Equalink®) Broadcast Satellite Modem Frequency converters portfolio 1+1 Modulator Redundancy Switch Universal Switching System Related Bandwidth Efficiency Technologies Clean Channel TechnologyTM Fully Automated Equalink ® Input interfaces Output interfaces ASI Interface • 2 selectable ASI inputs on BNC (F)- 75 ohms (coax) • 2 x ASI output (loop through) on BNC (Fl - 75 ohms (coax) • 188 or 204 byte mode • Rate adapter • MPTSor SPTS according to ISO/IEC 13818 ETH Interface • Auto switching 10/100/1000 Base-T Ethernet interface • Transport stream over IP interface (UDP/RTP) • Forward Error Correction SMPTE 2022-1 and -2 • 188 or 204 byte mode • Rate adapter • MPTS or SPTS according to ISO/IEC 13818 10 MHz Reference Input BNC (F), so ohms • Connector • Input level -3 dBm up to+ 7dBm • Frequencies 1,2,5,10,20 MHz Content Encryption and Protection BISS Encryption • Support for BISS-0, BISS-1 and BISS-E ·Single TS IF-band (configuration option) • Connector BNC (F) - 7S ohms (intermateable with so ohms) • Frequency so - 180 MHz (1 o Hz steps) -3S/+10 dBm(± 2 dB) • Level • Return loss SO ohms:> 14 dB 7S ohms:> 20dB • Spurious performance Better than -65 dBc/4kHz @l +S dBm output level and > 256kBaud Non-signal related:< -80 dBc@ +s dBm output L-band monitoring • Connector • Frequency • Level • Return loss Modulation Supported modulatlon schemes and FEC • DVS-S Outer/lnner FK: Reed Solomon /Viterbi MODCODs: QPSK: 1/2, 2/3, 3/4, 516, 718 • DVS-DSNG Outer/Inner FEC: Reed Solomon /Viterbi MODCODs: 8PSK: 2/3, S/6 16QAM 3/4, 718 • DVS-S2: Outer/Inner FEC: SCH/ LDPC MODCODS: QPSK: 1/4, 1/3, 2/S, 1/2, 3/5, 2/3, 3/4, 4/5, S/6, 819, 9/10 8PSK: 3/S, 2/3, 3/4, S/6, 8/9, 9/10 16APSK: 2/3, 3/4, 4/S, S/6, 8/9, 9/10 32APSK: 3/4, 4/S, 5/6, 8/9, 9/10 Baud rate range • DVS-S2 • DVS-S L-band (configuration option) N(F), SO Ohms (optional SMA adapter) • Connector • Frequency 950 -21so MHz (10 Hz steps) • Level -3S/+7 dBm(+/- 2d8) • Return loss > 14 dB • Switchable 10MHz Reference • Spurious performance Better than -65 dBd4kHz @l +5 dBm output level and> 256kBaud Non-signal related:< -80 dBc@+S dBm output 0,050 - 68 Mbaud O,OSO - 68 Mbaud Frame length • DVS-S • DVS-S2 Short Frames • DVS-S2 Normal Frames 188 bytes 16200 bits 64800 bits Roll-off factor • 20%-25%-3S% Clean Channel Technology"' (opt ion al) • Roll-off: S%-10%-1S%-20%- 2S%-3S% • Optimum carrier spacing • Advanced filter technology Carrier Interference Reduction • Carrier ID NIT Table • DVB RF Carrier ID (DVB-CID) • Spread Spectrum Modulator (BPSK) • Supports User Data • Compliant to DVB Standard SMA (F), SO ohms Same as L-Band output frequency or 1050 MHz in case of IF output option only -4SdBm > 10dB 1o MHz reference output (optlonal) BNC (F), SO ohms • Connector • Output level +3 dBm{+/- 2dBJ Internal 1O MHz Reference Frequency Standard Stability ·Stability: · Ageing: +/- 2000 ppb over Oto 70° C +/-1000 ppb/year High Stability (Optlonal) ·Stability: +/-SO ppb over Oto 7Cf'C ·Ageing: +/- 300 ppb/year Very High Stability (Optlonal) +/- 2 ppb over Oto 6S°C ·Stability: ·Ageing: +/- 500 ppb/10year Generic Monitor and cont rol Interfaces • Web server GUI (HTIP) via web browser • Diagnostics report, alarm log (HTTP) • SNMPv2c Alarm Interface • Electrical dual contact closure alarm contacts • Connector 9-pin sub-D (F) • Logical interface and general device alarm Physical · Height 1RU, width: 19'; clepth 51 cm, S.8 kg · Power supply: 90-130 & 18C>-260Vac. lOS VA. 47-63 Hz · Temperature -Operational: O°C to +SO°C I +32°F to +l 22°F - Storage: -40 to + 70°C I -40°F to + 158°F ·Humidity: S% to 85% non-condensing • CE label and UL Newtec Ordering Information - 1 1 1 t l t l : " •J';fa . - Configuration Options category ·~ Select 1 option M6100 Platform M6100 Chassis Type 01 CH-01 Select 1 option M6100 Operating Software M6100 Major Software Version R1* MS-12 Select 1 option Video Package Video TS, Carrier-ID( NIT), TS Analyser* VP-01 Select minimum 1 option Video Interface ASI (2 red. inputs, 2 out) (req. VP-01) AS-01 GbE TSolP inputs, FEC (req. VP-01 )• Vl-01 Select 1 option Modulator Output Interface L-band with switchable 1OMHz output* OU-00 IF (50-180 MHz)* OU-01 IF+ L-band with switchable 10 MHz out* OU-02 Select 1 option Standard Internal lOMHz IR-00 Internal Reference Clock High stability lOMHz IR-01 Very High Stability lOMHz IR-02 Select 1 option Modulation Standard and Coding DVB-S Q/8PSK* SC-01 OVB-S/52 QPSK* SC-02 DVB-5152 Q/8PSK* SC-03 DVB-5152 Q/8PSK 16QAM 16APSK* SC-04 DVB-5152 Q/8PSK 16QAM 16/ 32APSK• SC-05 Select 1 option Maximum Modulation Symbol Rates Modulation Symbol Rate 5Mbaud• SR-05 Modulation Symbol Rate 15Mbaud• SR-15 Modulation Symbol Rate 36Mbaud• SR-36 Modulation Symbol Rate 54Mbaud• SR-54 Modulation Symbol Rate 68Mbaud• SR~8 Additional Options Category Max. 1 option per category Reference Clock Output 10 MHz Reference Output (BNC) R0-01 Max. 1 option per category Modulator Output Connector L-Band output N to SMA output adapter OU-10 Max. 1 option per category Clean Channel Technology™ Clean Channel Technology for 5Mbaud• CC-05 Clean Channel Technology for 15Mbaud• CC-15 Clean Channel Technology for 36Mbaud• CC-36 Clean Channel Technology for 54Mbaud• CC-54 Clean Channel Technology for 68Mbaud• CC-68 Max. 1 option per category Pre-Distortion Automated Equalink4 Pre-Distortion• AE-01 Max. 1 option per category DVB-CID DVB RF Carrier Identifier• ID-01 Max. 1 option per category MPE Insertion Data insertion in TS via MPE (req. VP-01 )* VM-01 Max. 1 option per category Encryption BISS scrambler (Req. VP-01 )• CA-01 Services Category Max. 1 option oer category Support Care Pack 3 Basic GA-08 Care Pack 3 Enhanced GA-09 (•)Selectable via license key Contact your sales representative for detai Is (saleso newtec .eu).