Preview only show first 10 pages with watermark. For full document please download

Nex 885 - Micro-atx

   EMBED


Share

Transcript

DATA RESPONS GmbH Amalienbadstr. 41, Bau 53 - DE-76227 Karlsruhe, Deutschland Tel: +49 721 480 887 10 E-Mail: [email protected] www.datarespons.de NEX 885 Micro-ATX, Socket H3/LGA1150, 4th Generation Intel® Core™ i7/i5/i3, Q87 4DDR3, 2HDMI/DP/VGA, PCIex16/2 x PCIex1/PCIex4, 2 x GbE/6 x SATA3.0/4 x COM/10 x USB Main Features ŒŒ Intel® Q87 support Socket H3/LGA1150 for 4th Generation Intel® Core™ i7/i5/i3 processors ŒŒ 4 x DDR3 DIMM Socket up to 32 GB ŒŒ Support 2 x HDMI/DisplayPort/VGA up to three independent displays ŒŒ 2 x Intel® GbE, 6 x SATA 3.0, 3 x USB3.0/2.0, 4 x USB2.0/4 x COM, 8 x GPIO ŒŒ 1 x PCIex16, 2 x PCIex1, 1 x PCIex4 ŒŒ Support AT/ATX mode by ATX Power Input Product Overview NEX 885 is an industrial motherboard with Micro-ATX form factor, build-in Intel® Q87 desktop PCH to support Socket H3/LGA1150 as 4th Generation Intel® Core™ i7/i5/i3 and Celeron® processors which are designed specially to optimize the power savings and performance benefits on the improved 22 nm process. NEX 885 support dual channel DDR3 1600/1333/1066MHz memory in four long DIMM slots up to 32GB. NEX 885 support three independent displays by 2 x HDMI, DisplayPort and VGA. Intel® Q87 PCH manages up to 6 x SATA 3.0 to support software RAID 0/1/5/10 and performs up to 10 x USB (3 x USB3.0/USB2.0 and 4 x USB2.0) NEX 885 support PCIex16, 2 x PCIex1, PCIex4 slots, dual Intel® GbE ports and up to 4 x Series ports incl. 1 x RS-232/422/485 pre-selected in the BIOS. NEX 885 could be integrated into 1U/2U/4U by 19" rack mounted chassis or desktop tower as completed system solution for widely industrial applications in the new era of digital infrastructure. Specifications CPU Support ŒŒ Socket H3/LGA1150, 4th Generation Intel® Core™ i7/i5/i3 processors ŒŒ 1 x DisplayPort ŒŒ 1 x VGA Main Memory Expansion ŒŒ 4 x 240-pin dual channel long DIMMs support DDR3 1066/1333/1600MHz up to 32GB system memory ŒŒ 1 x PCIex16 (Gen. 3.0) ŒŒ 2 x PCIex1 ŒŒ 1 x PCIex4 Chipset ŒŒ Intel® Q87 Platform Controller Hub BIOS ŒŒ AMI BIOS UEFI ŒŒ Plug and play support On-board LAN ŒŒ ETH 0: Intel® I217LM PHY for AMT 9.0 ŒŒ ETH 1: Intel® I211 PCI Express Gigabit Ethernet ŒŒ Both ETH0 and ETH1 Support boot from LAN (PXE) when +5Vsb power available ŒŒ 2 x GbE RJ45 with LEDs Display ŒŒ 4th Generation Intel® Core™ socket H3/LGA1150 processors Integrated Gen. 7.5 HD graphics ŒŒ 2 x HDMI Indutrial Mother Board Edge I/O Interfaces ŒŒ ŒŒ ŒŒ ŒŒ ŒŒ ŒŒ 1 x Combo for PS2 KB/MS 1 x stack DB9 for COM1, and 1 x stack DB15 for VGA 1 x HDMI, 1 x stack combo of 2nd HDMI and 1 x Display port 1 x RJ45 (ETH 0) with dual stack USB3.0 (blue)/USB2.0 connectors 1 x RJ45 (ETH 1) with dual stack USB2.0 (black) connectors 1 x Stack Line-In/Line-out/Mic-in phone Jack I/O Interface ŒŒ USB3.0: 3 ports (2 x USB3.0 on edge I/O, 1 x internal box-header) ŒŒ USB2.0: 7 ports (4 x USB2.0 on edge I/O, 3 x internal box-header) ŒŒ Serial: 4 ports (default COM1/RS-232, pre-selected 1 x RS232/422/485, 2 x RS-232 by internal ŒŒ SATA HDD: 6 ports, SATA 3.0, Support Software RAID 0/1/5/10 and Intel® Matrix Storage ŒŒ GPIO: Supports 4 xGPI and 4 x GPO with TTL level (0- 5V), 2 x 6 pin www.nexcom.com Block Diagram VR12.5 PEG(12-15) DP D HDMI HDMI =PCIE Optional= DP NEX 891 Q87(Desktop) C226(workstation) Mem Type Non-ECC DDR3-1600 ECC DDR3-1600 PCIE Slot PCIex16 PCIex1 PCIex4 PCIex1 PCIex 8 PCIex 4 PCIex 4 PCIex 4 FDI FP HEADER (USB3.0)(JUSB3) BP CONNECTOR (USB3.0+LAN1) (CN3) P1, P2 P3, P4 P2, P3 P0, P1 BP CONNECTOR (USB2.0+LAN2) (CN4) FP HEADER (USB2.0)(JUSB1/2) DDR3 1066/1333/1600 MT/s DIMM3 DDR3 CHB DDR3 1066/1333/1600 MT/s DIMM4 FDI MIC2 (FB Header) DMI LINEIN 1 Lyxn Point (Q87/C226) HDA BUS ALC 886 AUDIO CODEC Port 1~ 6 support (6 Gb/S) SATA BUS BUS(3) BP CONNECTOR (USB2.0+LAN2) (CN4) INTEL I211 GbE Controller BUS(4) SATA PORT 1 SATA PORT 2 SATA PORT 3 LPC SPI SATA PORT 4 BIOS/ME SPI ROM P8 - P11 INTEL I217 LM GbE PHY FRONT LINEOUT MIC1 P4, P5 BP CONNECTOR (USB3.0+LAN1) (CN3) PCIEx 4 SLOT2 Maximum support 32GB: WS support ECC LINE2 (FB Header) SATA (6) P0, P1 DDR3 1066/1333/1600 MT/s DIMM2 DMI x4 HDA VGA DDR3 1066/1333/1600 MT/s DIMM1 DDR3 CHA DMI FDI x 2 VGA PCH DP B Haswell (DT/WS) PCI-E x 1 (8) USB 2.0(14) USB 3.0(4) NEX 885 DP C DDR3 CH A PCIEx 4 SLOT3(CN17) DDR3 CH B PCI-Ex 1 BUS(1) PEG[0:15] PEG PEG(8-11) VCORE PCIEx 16 SLOT1 DP B DP C DP D PCI-Ex 1 BUS(2) PCIEx 4 SLOT2(CN16) SATA PORT 5 SATA PORT 6 SUPER I/O IT 8785E HW MONITOR COM1 CONNECTOR (RS-232) BUS(1) BUS(5-8) BUS(2) header, 2.54mm Interface ŒŒ One on-board buzzer ŒŒ One 4-pin FAN connector for CPU, Two 3-pin FAN connector x 2 (for System) ŒŒ One 2 x4/2.54mm pin header for: Power LED/Storage LED/Reset/ Power On-Off ŒŒ One 2 x4/2.54mm pin header for :Mic-in/Line-out ŒŒ Front Panel I/O: HDD LED (1-3 pin); Power LED (2-4 pin) ŒŒ Reset (5-7 pin); Power Button (6-8 pin) ŒŒ On board pin header for IrDA Tx/Rx (option) ŒŒ On-chip RTC with back-up battery/CR2032 holder onboard GPIO KB/MS COM2 HEADER (RS-232/422/485) COM3 HEADER(RS-232) COM4 HEADER(RS-232) Ordering Information ŒŒ NEX 885 (P/N: TBD) Micro ATX, onboard Q87 to support Socket H3/LGA1150, 4th Generation Intel® Core™ i7/i5/i3 Processors 4DDR3/DIMM, 2HDMI/ DP/VGA, PCIex16/2PCIex1/PCIex4, 6 x SATA 3.0, 3 x USB3.0/2.0, 7 x USB2.0, 2 x GbE, 4 x COM, ATX Power Input System Monitor ŒŒ Derived from Super IO ITE IT8785E to support System Monitor ŒŒ Monitoring of voltages, 2 temperatures and 3 Fans Speed 4 Voltage for 3.3V, 5V, 12V, Vcore 2 Temperatures (CPU, one external Temperature Sensor) 3 Fans speed ŒŒ Watchdog timeout can be programmable by Software from 1 second to 255 seconds/minutes Power Input ŒŒ Support AT/ATX mode Standard ATX 24-pin connector for +12V/+5V/+3.3V/+5Vsb/-12V ATX 8-pin connector for +12V power connector Dimensions ŒŒ Micro-ATX/Dimension: Lx W, 244mm x 244mm; 9.6"x 9.6" Environment ŒŒ Board level operating temperatures: -15°C to 60°C ŒŒ Storage temperature: -20°C to 85°C ŒŒ Relative humidity: Operating 10% to 90%, (Non-condensing) Certifications ŒŒ Meet CE ŒŒ FCC Class A DATA RESPONS GmbH Amalienbadstr. 41, Bau 53 - DE-76227 Karlsruhe, Deutschland Tel: +49 721 480 887 10 E-Mail: [email protected] www.datarespons.de Indutrial Mother Board We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 04/11/2014