Nexio® Titleone - Imagine Communications

Transcript

Hardware Specifications Nexio® TitleOne™ 7/30/2014 Edition: A Nexio® TitleOne™ Hardware Specifications Publication Information © 2014 Imagine Communications. Proprietary and Confidential. Imagine Communications considers this document and its contents to be proprietary and confidential. Except for making a reasonable number of copies for your own internal use, you may not reproduce this publication, or any part thereof, in any form, by any method, for any purpose, or in any language other than English without the written consent of Imagine Communications. All others uses are illegal. This publication is designed to assist in the use of the product as it exists on the date of publication of this manual, and may not reflect the product at the current time or an unknown time in the future. This publication does not in any way warrant description accuracy or guarantee the use for the product to which it refers. Imagine Communications reserves the right, without notice to make such changes in equipment, design, specifications, components, or documentation as progress may warrant to improve the performance of the product. Trademarks Nexio® and Nexio® TitleOne™ are trademarks or trade names of Imagine Communications or its subsidiaries. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. All other trademarks and trade names are the property of their respective companies. Contact Information Imagine Communications has office locations around the world. For domestic and international location and contact information, visit our Contact page (http://www.imaginecommunications.com/company/contact-us.aspx). Support Contact Information For domestic and international support contact information see:    Support Contacts (http://www.imaginecommunications.com/services/technical-support.aspx) eCustomer Portal (http://support.imaginecommunications.com) Academy Training (http://www.imaginecommunicationsacademy.com) © 2014 Imagine Communications. Proprietary and Confidential. 7/30/2014 | Page 2 Nexio® TitleOne™ Hardware Specifications TitleOne Hardware Specifications TitleOne Hardware Specifications The following information details the technical specifications for Nexio® TitleOne™ systems. System Technical Specifications The following table details the TitleOne system’s technical specifications. TitleOne System Technical Specifications Item Specification Chassis  3RU Rackmount Chassis (with supplied rack rails)  Dimensions: Height: 5.2" (13.2cm) Width: 17.2" (43.7cm) Depth: 25.50" (64.77cm) CPU  Intel® Ivy Bridge E3-1225V2 3.2GHz quad core RAM  2 x 4GB DDR3 1600 MHz GPU  Single Nvidia Quadro K600 Display Connectors  1 x VGA Storage  1 x 250GB system drive  3 x 250GB media drives in RAID 0 Network  Dual Gigabit ethernet USB Ports  Six USB 2.0 ports  Two USB 3.0 ports Recovery  Bootable restore USB thumbdrive to return system to factory configuration Optical Drive  CD/DVD-RW drive Serial Ports  2 x RS-232 serial ports Power Supply  2 (1 + 1) redundant hot swappable power supply  2 x 800W G411 General Specifications The following table details the common features of the G411. TitleOne supports a subset of the full G411 features. G411 Common Features © 2014 Imagine Communications. Proprietary and Confidential. 7/30/2014 | Page 3 Nexio® TitleOne™ Hardware Specifications TitleOne Hardware Specifications Item Supported byTitleOne Full G411 Specification HD/SDI Inputs  2  4 HD/SDI Outputs  2  4 HD/SDI Embedded Audio In  2 x 16  4 x 16 HD/SDI Embedded Audio Out  2 x 16  4 x 16 Video Formats  10-bit Uncompressed, 8-bit Uncompressed  10-bit Compressed, 8-bit Compressed  10-bit Uncompressed, 8-bit Uncompressed  10-bit Compressed, 8-bit Compressed Audio Formats  PCM (32-bit, 48k)  PCM (32-bit, 48k) Audio Mixer  128 x 64 track  128 x 64 track HD Formats  1080i, 720p  1080i, 720p HD Scan Rates (fps)  60, 59.94, 50, 30 29.97, 25  60, 59.94, 50, 30 29.97, 25 LTV Playback  2 Video + 2 Alpha  4 Video + 4 Alpha LTV Capture  Not Supported  2 Video or 1 Video + 1 Alpha HD 2D DVE (10-bit)  Not Supported  4 HD 3D DVE (optional)  Not Supported  2 SD Formats  NTSC, PAL  NTSC, PAL SD Scan Rates (fps)  60, 59.97, 50  60, 59.97, 50 SD Playback  2 Video + 2 Alpha  4 Video + 4 Alpha SD Capture  Not Supported  2 Video or 1 Video + 1 Alpha SD 2D DVE (10 bit)  2  4 Proxy Scaler (realtime downscaler)  Not Supported  1 Video Mixer (wipe/dissolve effects)  Not Supported  2 Keyer  8  8 Down Converter  1 Video  2 (Video + Alpha) Full Size PCI Express Gen 2 Card  8 lane  8 lane LTC Input  HDBNC, 0.4Vpp to 5Vpp, Hi-Z termination  HDBNC, 0.4Vpp to 5Vpp, Hi-Z termination © 2014 Imagine Communications. Proprietary and Confidential. 7/30/2014 | Page 4 Nexio® TitleOne™ Hardware Specifications TitleOne Hardware Specifications G411 HD/SDI Video Specifications The following table outlines the video specifications for the G411. HD/SDI Video Specifications Item Specification Line/frame rates supported     1080i/60, 1080i/59.94, 1080i/50 720p/60, 720p/59.94, 720p/50 SD-525, 4:3/16:9 SD-625, 4:3/16:9 Note: 1080p is not supported but the system is 1080p capable for future-proofing. Standards  SMPTE424M, SMPTE 292M, SMPTE 259M-C, SMPTE 274M, SMPTE 240M, SMPTE 272M Input Impedance  75 Ohms Input Quantity & Connector  4 HDBNC Input Return Loss  > 15dB, minimum over a frequency range of 5MHz to 1.5GHz Input Equalization  Automatic, adjustment-free cable equalization Input Sensitivity  <100mV Input Cable length  For HD 135m min.; for SD 250m min. of Belden 1694A cable Output Impedance  75 Ohms Output Quantity / Connector  4 HDBNC Note: The 2 SD preview outputs are not supported but have been included for future-proofing. Output Return Loss  > 15dB, minimum over a frequency range of 5MHz to 1.5GHz Output Signal Level  800 mV ±10% Output D.C. Offset  0.0 V + 0.5 V Output Rise and Fall Time  < 270ps (20 to 80% amplitude), not differing by 100ps for HD, between 400 to 700ps (20 to 80% amplitude) for SD Output Overshoot  <10% Output Jitter  < 135ps peak-to-peak for HD  < 0.2 UI (740ps) peak-to-peak for SD Miscellaneous  EDH insertion on output VITC Input / Output  Supported on HDSDI inputs and outputs © 2014 Imagine Communications. Proprietary and Confidential. 7/30/2014 | Page 5 Nexio® TitleOne™ Hardware Specifications TitleOne Hardware Specifications G411 AES Audio Specifications The following table details the AES audio specifications. AES Audio Specifications Item Specification Standard  AES3-1992, AES 3id-1995, EIAJ CP-340, SMPTE276M Input Quantity / Connector  1xMDR36 (shared with output) with 8 BNC connectors via pony tail breakout cable Sample Resolution  16/20/24-bit Input Sampling Rates  32kHz, 44.1kHz, 48 kHz, 96kHz Input Impedance  75 Ohms Input Return Loss  > 40dB, typical from 0.1Hz to 6.0MHz  > 30dB, worst case from 0.1Hz to 6.0MHz Input Sensitivity  120mVpp to 2.5Vpp Maximum Input Signal  2.5Vpp Rise / Fall Time  5 to 30ns (10% to 90%) Output Common Mode Component  >30dB below output signal (0 to 6MHz) Output Sampling Rate  48 kHz Output Quantity / Connector  1xMDR36 (shared with input) with 8 BNC connectors via pony tail breakout cable Output Coupling  AC Coupled Output Impedance  75 Ohms Output Return Loss  > 40dB, typical from 0.1 Hz to 6.0 MHz  > 30dB, worst case from 0.1 Hz to 6.0 MHz Output Level  1.0V +/-10% (terminated) Output Jitter  < 0.025UI Output Rise / Fall Time  5 to 30ns (10% to 90%) G411 Genlock (Ref In) Specifications The following table details the genlock (reference in) specifications. Genlock (Ref In) Specifications Item Specification Standard  SMPTE-318M © 2014 Imagine Communications. Proprietary and Confidential. 7/30/2014 | Page 6 Nexio® TitleOne™ Hardware Specifications Item TitleOne Hardware Specifications Specification Input Quantity / Connector  1 HDBNC Input Sensitivity  > 100 mV Input Impedance  75or High-Z (software controlled) Input Return Loss  > 35 dB (25 Hz to 10 mHz) CMRR  >60dB @60Hz for a 10Vpp input signal Input Types  NTSC/PAL Color black or 2 V sync or Tri-level sync Power Supply Specifications The following table outlines the TitleOne power supply specifications. TitleOne Power Supply Specifications Power Supply 800 W AC input  100 - 240V  50 - 60Hz  10A - 4Amp Nominal DC outputs +5V standby  4Amp +12V  66Amp +5V  25Amp +3.3V  12Amp -12V  0.5Amp © 2014 Imagine Communications. Proprietary and Confidential. 7/30/2014 | Page 7