Preview only show first 10 pages with watermark. For full document please download

Nga-la24-n-dcx Gps L1 In Line Amplifier With 24db Gain

   EMBED


Share

Transcript

DC0123-R01 NGA-LA24-N-DCx GPS L1 In line Amplifier with 24dB Gain NAELCOM’s GPS Low Noise in-line Amplifier NGA-LA24-N series with L1 band pass filter provides high gain (24dB typical) in cases where GPS and antennas are separated by large distances. Long cables runs require the use of low loss cable, heavy and costly cables. NGA-LA24-N will allow increasing from 60 meters to more than 200 meters between the GPS antenna and a timing receiver. Two amplifiers may be chained to reach a distance up to 365 meters (CNT400 cable). NGA-LA24-N is available in two versions, one DC PASS powered by GPS receiver through antenna coaxial cable which accepts power from 3VDC to 16VDC, the other in DC Block which Block the DC from the GPS receiver and amplify the signal from the GPS passive antenna (Railways applications). Due to his exceptional dimensions (84mm L x 18mm D) the NGA-LA24-N is cylindrical and can be installed inside most of antenna pipe mount and integrated with cables in-line. NGA-LA24-N series is rugged and weatherproof (IP67), corrosion resistant (INOX housing), it can be used also with surge arrestor (NGA-NMNBF-Family). Applications Benefits  Timing and Synchronization  Reduce overall cost using cheaper cable  Railways (DC Block for passive antennas)  Compensating losses  Telematics Systems  Improves signal reception  Timing for Telecom, Base Stations  No external voltage required  For long cable run or splitters are used  Fits inside antenna mounting pipe NAELCOM – 2, rue Jean Mermoz – 93297 Tremblay-en-France Tél. : +33 (0)1 48 61 95 28 – Fax : +33 (0)1 48 61 94 03 http://www.naelcom.com - e-mail : [email protected] DC0123-R01 Specifications Gain Input/Output Impedance Filter Attenuation Reverse Isolation Noise Figure VSWR Input Output RF Input Level DC Power Current 24dB (typical) 50Ω >35dB@L1±75MHz >40dB@L1±140MHz >35dB 2.5dB <1.5 <2.0 -10dBm maximum +3VDC to +16VDC <10mA Mechanical and Environmental Dimensions (Including connectors) Connectors Housing Operating Temperature Weight Warranty Environmental 84mm L x 18mm D 2 N Type Female INOX -40°C; +85°C 90 g 1 year RoHS (PCB UL94V-0), Weatherproof (IP67) connected GPS Antenna Ordering Information NGA-LA24-N-DCB NGA-LA24-N-DCP (DC Block) with N connectors (DC Pass) with N connectors CABLE TYPE Max Length (Meter) No Amplifier Max Length (Meter) Single Amplifier Max Length (Meter) Single Amplifier + 4 way GPS Signal Splitter Max Length (Meter) Single Amplifier + 8 way GPS Signal Splitter Max Length (Meter) Single Amplifier + 16 way GPS Signal Splitter LMR/CNT195 20 69 56 48 41 LMR/CNT240 30 103 83 72 61 LMR/CNT400 59 200 161 139 119 LMR/CNT600 91 309 249 215 183 RG59 21 71 57 49 42 RG213 32 110 88 76 65 RG214 32 110 88 76 65 Calculation is based using 35dB GPS antenna (Receiver Minimum Input Level: 20db) *Product designed and manufactured in France NAELCOM – 2, rue Jean Mermoz – 93297 Tremblay-en-France Tél. : +33 (0)1 48 61 95 28 – Fax : +33 (0)1 48 61 94 03 http://www.naelcom.com - e-mail : [email protected] GPS In Line Amplifier