Nice Product Catalogue

Transcript

Nice OpenKit Automation kits for gates, garage doors and barriers: an easy way to choose Nice. Catalogue 2013 Focus on Nice News The simplest integration, the finest design, the utmost control devices to offer the most amazing automation experience New universal control system Inti universal control system for gates, garage doors and barriers of all kinds. Ideal for use in apartment blocks or multi-user systems. Easy to install: combined with the OX2 universal receiver, the Inti transmitter is able to control and manage any automation, including pre-installed systems. New design for radio controls Era One line of transmitters: the ideal and sleek design solution to control multi-user systems. The system includes 1, 2, 4 and 9 channel transmitters. New kit for swing gates, discreet installation L-Fab, the underground motor ideal for a stylish and discreet installation. Powerful and rugged, for gates with leaves up to 4 m. Easy programming and operation for long lasting and reliable solutions. New range of barrier gate operators NiceBar System, to control road access to car parks and other private areas, including high traffic ones. Powerful and fast: 5 models in 3 standard versions, up to 7 modular bars from 3 to 9 m. New design. Nice OpenKit A range of complete and convenient Nice kits to automate gates, garage doors and barriers: quick and easy to install, safe and simple to use. All with the option of cost saving and environmentally friendly solar power. Index Kit for universal control system 6|9 IntiKit Kits for swing gates 12|13 14|15 16|17 18|23 24|27 28|29 59 L-Fab Big-Fab L-FabKit; Big-FabKit ToonaKit HykeKit HoppKit Site assessment for swing gates Kits for sliding gates 32|33 34|37 38|41 60 RobusKit 400 RobusKit 600/1000 RunKit Site assessment for sliding gates Kits for garage doors 44|49 SpinbusKit 61 Site assessment for garage doors Kits for barriers 50|51 M-BarKit 52|53 L-BarKit 62 Site assessment for barriers Solar power Kit 54|55 Solemyo Accessories for more complete installations 56|57 Control systems, safety devices, Solemyo Air Net System, battery charger, racks Inti The colourful new line of 1 and 2 channel miniaturised transmitters, available in six colours. Scratch-resistant coating Ergonomic INTI1Y, INTI2Y INTI1R, INTI2R INTI1L, INTI2L 433.92 MHz rolling code, with management of Identity Codes and Certificates, self-learning and built-in proximity receiver; with 72 bit O-Code encoding, also compatible with receivers with Nice FLOR encoding. Evolved: uses data processing and recognition systems that increase its degree of security and deliver a threefold reduction in automation response times. INTI1G, INTI2G INTI1B, INTI2B Easy memorisation, even at a distance, thanks to Opera receivers. INTI1, INTI2 • using the Nice O-Box connection interface; the receiver’s Certificate is entered by just placing the new Inti next to the O-Box and following the guided procedure on a PC or PDA (figure 2). There are two options for enabling a new Inti transmitter, even at a distance from the system: Safe, if a transmitter is stolen or lost, with the O-Box the user can: • using a transmitter already programmed in the receiver, thanks to the enabling Code exchange between the two (figure 1); • replace it, maintaining the same functions as in the previous one; • disable the old transmitter by increasing the priority level on the new Inti. Transmitter technical specifications INTI_Y, INTI_R, INTI_L, INTI_G, INTI_B, INTI Carrier frequency Estimated range Encoding Power supply Battery life Protection class 433.92 MHz 150 m (outdoors); 30 m (if inside buildings)* O-Code 72 bit; rolling code 3 Vdc; lithium battery type CR2032 2 years (with 10 transmissions for day) IP40 (use in protected environments) Dimensions Weight 30x56x9 h mm 14 g * Transmitter range and receiver reception capacity may be affected by any devices operating on the same frequency in the area. Receiver technical specifications Reception frequency OXI OXIT OX2 OX2T OX4T 6 Transmission frequency Input impedance Sensitivity Encoding 433.92 MHz 433.92 MHz 52 Ohm 433.92 MHz >0.5 μ V for signals with successful outcomes O-Code, FloR, Flo Number of channels Relay contact Power supply Absorption 4 (15 on BUS T4) - 5 Vdc 30 mA (max) 2 max 0.5 A 50 V (NA) from 12 to 28 Vdc/Vac 80 mA (max) with relays active 4 relays with NO and NC contacts, voltage-free 5 A - 250 V 110 ÷ 240 Vac 50/60 Hz 80 mA Protection class Dimensions Weight 50x19x45 h mm, 20 g IP 30 58x86x22 h mm, 55 g IP 44 (with container intact) 128x112x43 h mm, 260 g Unintiversal! Inti, the universal control! Ideal for use in apartment blocks or multi-user systems. Easy and inexpensive to install: combined with the OX2 universal receiver, the Inti transmitter is able to control and manage any automation, including pre-installed systems. Elegant and customised, Inti is also a colourful, useful keyring. It’s Nice to be Nice! The complete line of receivers with Opera system functions, suitable for all installation requirements: • with connector, compatible with latest-generation Nice control units with SM port; • universal prewired, for use with all types of control units, for the control of any automation, lighting or irrigation system or other electric circuits. Maximum flexibility: up to 1024 transmitters can be memorised. Secure use, thanks to the 3 password-protected levels. Practical and functional: the built-in transmitter in the OXIT, OX2T and OX4T receivers allows radio codes to be accessed by means of the O-Box multifunction interface even when in inaccessible positions (figure 3). The O-Box and dedicated software applications for PC and PDA allow: OXIT, OX2T and OX4T receivers can be used as signal repeaters to increase the operating distance between transmitters and other One series receivers (figure 4). OXI, OXIT 1. 2. OX2, OX2T - quick, user-friendly programming of Inti receivers and transmitters; - management and printout of code list; - creation of individual installation databases (useful in multi-user systems). OX4T 3. O-BOX 4. 7 IntiKit Universal control system IntiKit for gates, garage doors and barriers of all kinds Each to their own! No more quarrels! With IntiKit you can choose the transmitter you like best. And if you want to make your Nice world even more colourful, explore the other colours available! 8 + INTI2B Three miniaturized transmitters 433.92 MHz, 2 channel. INTI2R INTI2G OX2 One pre-wired universal receiver up to 2 channel without built-in transmitter. 9 Selection guide Follow the arrow and choose the right kit For swing gates with rolling code transmitters: 230 Vac L-FabKit 1 24 Vdc L-FabKit 2 for a pair of gates 24 Vdc Big-FabKit 1 for a single gate 24 Vdc Big-FabKit 2 for a pair of gates 230 Vac ToonaKit 1 24 Vdc ToonaKit 3 230 Vac ToonaKit 2 24 Vdc ToonaKit 4 230 Vac ToonaKit 6 24 Vdc ToonaKit 7 for a pair of gates 24 Vdc ToonaKit 5 for a single gate 24 Vdc ToonaKit 8 for a pair of gates 24 Vdc HykeKit 1 for a single gate 24 Vdc HykeKit 2 for a pair of gates 24 Vdc HoppKit for leaves up to 4 m with magnetic encoder Underground installation for leaves up to 5 m for leaves up to 3 m for a pair of gates worm screw for leaves up to 5 m for a single gate for leaves up to 7 m Surface mounted for leaves up to 3.5 m articulated arm for leaves up to 2.4 m 10 L-FabKit Big-FabKit ToonaKit HykeKit HoppKit 11 L-FabKit Reliability and resistance For swing gates with leaves up to 4 m, underground installation. Irreversible electromechanical gear motors, also available in 24 Vdc versions with magnetic encoder and mechanical stop. Waterproof, with IP67 protection rating Foundation boxes with mechanical stop on opening: • in stainless steel (BMBOX4I), ideal for use in extreme conditions, • with cataphoresis paint finish (BMBOX4), highly resistant to corrosion. Maximum freedom of choice: release from inside or outside, two key or lever operated models, easy to operate with just one hand. Simple to use: built-in mechanical stop system on closure. Standard opening to 110°, or optional 360°. Ideal for intensive use, BM4024 model is compatible with the control unit Moonclever MC824H, with BlueBUS technology, Solemyo and Opera systems: • simple programming via a single key • self-learning of travel limits on opening and closing • self-diagnostics of faults • programming of pause time • pass door • deceleration on opening and closing • dual technology obstacle detection • operation in the event of a power failure with optional rechargeable batteries (PS324) • provision for connection of latest generation sensitive edges. BM4000 model is compatible with the control units A6F and A60. 152 48 60 Dimensions 230 1.5 340 1 300 60 0.8 500 20 67 -20 ÷ +50 400x325x150 h 14.4 60 48 24 5 120 152 BM4000 8 BM4024 400 Code Electrical data Power supply (Vac 50 Hz) Power supply (Vdc) Current (A) Power (W) Performance data Speed (Rpm) Torque (Nm) Work cycle (%) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) 8 Technical specifications 325 mm 400 12 Approximate draft. Solar panel Photocells Battery box Control unit L-Fab Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Max. gate weight (kg) Utilisation limits 650 500 300 1 2 3 4 Max. gate length (m) The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph to the side. Use 230 Vac models in windy locations. Compact and elegant, blends in perfectly with any architectural style. 13 Big-FabKit New motor for more reliability and resistance For swing gates with leaves up to 5 m, underground installation. Irreversible electromechanical gear motors, 24 Vdc, with magnetic encoder and mechanical stop. Waterproof, with IP67 protection rating Chamfered foundation boxes with mechanical stop on opening: • in stainless steel (BMBOXI), ideal for use in extreme conditions, • with cataphoresis paint finish (BMBOX), highly resistant to corrosion. Maximum freedom of choice: release from inside or outside, two key or lever operated models, easy to operate with just one hand. Simple to use: mechanical stop system on closure. Standard opening to 110°, or optional 360°. Ideal for intensive use, compatible with the control unit Moonclever MC824H: • simple programming via a single key • self-learning of travel limits on opening and closing • self-diagnostics of faults • programming of pause time • pass door • deceleration on opening and closing • dual technology obstacle detection • operation in the event of a power failure with optional rechargeable batteries (PS324) • provision for connection of latest generation sensitive edges. 152 48 60 Dimensions BM5024 24 7 170 48 60 400 67 -20 ÷ +50 400x325x150 h 12 152 0.8 400 45 8 Code Electrical data Power supply (Vac 50 Hz) Power supply (Vdc) Current (A) Power (W) Performance data Speed (Rpm) Torque (Nm) Work cycle (%) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) 8 Technical specifications 325 mm 400 14 Approximate draft. Solar panel Photocells Battery box Control unit Big-Fab Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Max. gate weight (kg) Utilisation limits Max. gate length (m) The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph to the side. Use 230 Vac models in windy locations. Stylish and discreet installation. Powerful and rugged, ideal for large gates. 15 L-FabKit For a pair of gates L-FabKit 1 Up to 4 m, including: BM4000 Two 230 Vac motors with built-in mechanical stop on closing. BMBOX4 Two foundation boxes, cataphoresis paint finish, leaf coupling levers. ON2E Two transmitters 433.92 MHz, 2 channels. A60 One control unit for two motors, with 230 Vac. MOF One couple of surface-mounted photocells. OXI One receiver up to 4 channels with connector, without built-in transmitter. ON2E Two transmitters 433.92 MHz, 2 channels. MC824H One control unit for two motors, with 24 Vdc, encoder. MOFB One couple of outdoor photocells, surfacemounted, designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MEA3 Two lever-type keys to unlock system. L-FabKit 2 Up to 4 m, including: BM4024 Two 24 Vdc motors, with magnetic encoder and mechanical stop on closing. MEA3 Two lever-type keys to unlock systems. 16 BMBOX4 Two foundation boxes, cataphoresis paint finish, leaf coupling levers. Big-FabKit For a pair of gates Big-FabKit 1 Up to 5 m, including: BM5024 Two irreversible, electromechanical gear motors, 24 Vdc, with magnetic encoder, with mechanical stop on closing. BMBOX Two foundation boxes with cataphoresis finish with mechanical stop on opening. ON2E Two transmitters 433.92 MHz, 2 channels. MC824H One control unit for two motors, with 24 Vdc encoder. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. ON2E Two transmitters 433.92 MHz, 2 channels. MC824H One control unit for two motors, with 24 Vdc encoder. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MEA3 Two lever-type keys to unlock system. For a single gate Big-FabKit 2 Up to 5 m, including: BM5024 One irreversible electromechanical gear motor, 24 Vdc, with magnetic encoder, with mechanical stop on closing. BMBOX One foundation box with cataphoresis finish with mechanical stop on opening. MEA3 One lever-type key to unlock system. 17 ToonaKit For swing gates with leaves up to 3 m (Toona4), 5 m (Toona5) and 7 m (Toona7). Ideal for all requirements from residential to industrial applications. Electromechanical gear motors, surface mounted, also in 24 Vdc version with magnetic encoder. The 24 Vdc version with magnetic encoder and new control unit Moonclever (MC824H) equipped with BlueBUS technology, is designed for operation with the Solemyo solar power system. Quality and durability thanks to the housing, made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents. Bronze lead screw for safe closure. Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor. Technical specifications Code TO4006 TO4024 TO5016 TO5024 TO7024 Electrical data Power supply (Vac 50 Hz) 230 230 Power supply (Vdc) 24 24 Current (A) 1.5 5 1.5 5 Power (W) 340 120 340 120 Performance data Speed (Rpm) 0.016 0.013 0.016 0.013 Force (N) 1800 2700 Work cycle (cycles/hour) 58 95* 22 95* 41* Dimensional and general data Protection level (IP) 44 Working temp. (°C Min/Max) -20 ÷ +50 Dimensions (mm) 820x115x105 h 965x115 x105 h 1200x128x150 h Weight (kg) 6 7 15 * With optimal installation. 18 Dimensions Toona4 Toona5 Toona7 24 Vdc version with magnetic encoder, perfect for intensive use: • easy programming by pressing a single button • clutch with anti-crush safety feature • automatic memorization of limit switches in opening and closing with self-learning function • pause time programming; partial opening; slowdown during opening and closing • the system will operate during a blackout by means of rechargeable batteries. Approximate draft. Solar panel Battery box Photocells Control unit Toona Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Reliable and silent: patented layout on internal parts. Utilisation limits Max. gate length (m) Max. gate weight (kg) Toona7 Max. gate weight (kg) Toona5 Max. gate weight (kg) Toona4 Max. gate length (m) Max. gate length (m) The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph above. Use 230 Vac models in windy locations. 19 ToonaKit For a pair of gates ToonaKit 1 Up to 3 m, including: TO4006 Two irreversible electromechanical gear motors, 230 Vac, fast, with limit switch in opening and closing. ON2E Two transmitters 433.92 MHz, 2 channels. A60 One control unit with plug-in receiver SMXI. MOF One couple of surface-mounted photocells. OXI One receiver up to 4 channels with connector, without built-in transmitter. A60 One control unit with plug-in receiver SMXI. MOF One couple of surface-mounted photocells. OXI One receiver up to 4 channels with connector, without built-in transmitter. MC824H One control unit for two motors, with 24 Vdc encoder. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. ToonaKit 2 Up to 5 m, including: TO5016 Two irreversible electromechanical gear motors, 230 Vac, slow, with limit switch in opening and closing. ON2E Two transmitters 433.92 MHz, 2 channels. ToonaKit 3 Up to 3 m, including: TO4024 Two irreversible electromechanical gear motors, 24 Vdc, with magnetic encoder, mechanical stop in opening. 20 ON2E Two transmitters 433.92 MHz, 2 channels. ToonaKit 4 Up to 5 m, including: TO5024 Two irreversible electromechanical gear motors, 24 Vdc, with magnetic encoder, mechanical stop in opening. ON2E Two transmitters 433.92 MHz, 2 channels. MC824H One control unit for two motors, with 24 Vdc encoder. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MC824H One control unit for two motors, with 24 Vdc encoder. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. ToonaKit 5 Up to 7 m, including: TO7024 Two irreversible electromechanical gear motors, 24 Vdc, with magnetic encoder, mechanical stop in opening and closing. ON2E Two transmitters 433.92 MHz, 2 channels. 21 ToonaKit For a single gate ToonaKit 6 Up to 5 m, including: TO5016 One irreversible electromechanical gear motor, 230 Vac, slow, with limit switch in opening and closing. ON2E Two transmitters 433.92 MHz, 2 channels. A60 One control unit with plug-in receiver SMXI. MOF One couple of surface-mounted photocells. OXI One receiver up to 4 channels with connector, without built-in transmitter. MC824H One control unit for two motors, with 24 Vdc encoder. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MC824H One control unit for two motors, with 24 Vdc encoder. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. ToonaKit 7 Up to 5 m, including: TO5024 One irreversible electromechanical gear motor, 24 Vdc, with magnetic encoder, mechanical stop in opening. ON2E Two transmitters 433.92 MHz, 2 channels. ToonaKit 8 Up to 7 m, including: TO7024 One Irreversible electromechanical gear motor, 24 Vdc, with magnetic encoder, mechanical stop in opening and closing. 22 ON2E Two transmitters 433.92 MHz, 2 channels. HykeKit For swing gates with leaves up to 3.5 m, ideal for large pillars. Irreversible electromechanical 24 Vdc gear motor with articulated arm, surface mounted. Ideal for intensive use. Reliable, durability thanks to the housing in aluminium with polyester paint finish, resistant to atmospheric agents. Ultra-powerful and delicate: 500 Nm of torque provides millimetric precision and reliability. Safety in movement with dual technology obstacle detection. Two irreversible 24 Vdc versions with limit switches on opening and closing: with built-in control unit (HK7024) and without control unit (HK7224). Practical and quick installation: the articulated arm is adjustable in length for maximum flexibility. No black out: with the optional batteries (PS124) housed inside the gear motor. Simple and precise limit switch adjustment: mechanical stops and micrometric adjustment screws. Built-in control unit (HK7024): • simple programming via a single key • self-learning of opening and closing limit positions • automatic fault diagnostics • pause time programming • pass door • deceleration on opening and closing • obstacle detection with dual technology • provision for connection of latest generation sensitive edges. Easy to operate release lever, with metal lock and personalised Nice key. With provision for cable control. Savings, respect for the environment, and autonomy: when connected to the buffer battery or Solemyo kit, consumption on standby is just 0.1 W. Technical specifications Code Electrical data Power supply (Vac 50 Hz) Power supply (Vdc) Current (A) Power (W) Performance data Speed (Rpm) Torque (Nm) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) 24 Dimensions HK7024 HK7224 230 1.5 300 24 6 140 2.25 500 40 54 -20 ÷ +50 290x210x320 h 10.5 9.5 Approximate draft. Solar panel Photocells Battery box Hyke Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Max. gate weight (kg) Utilisation limits Max. gate length (m) The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph above. Maximum versatility with the articulated arm, even with large pillars. Ultra-powerful and delicate, ideal for intensive use. 25 HykeKit For a pair of gates HykeKit 1 Up to 3.5 m, including: HK7024 One irreversible electromechanical gear motor, 24 Vdc, complete with articulated arm and built-in control unit. HK7224 One irreversible electromechanical gear motor, 24 Vdc, complete with articulated arm without control unit. ON2E Two transmitters 433.92 MHz, 2 channels. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. For a single gate HykeKit 2 Up to 3.5 m, including: HK7024 One irreversible electromechanical gear motor, 24 Vdc, complete with articulated arm and built-in control unit. 26 ON2E Two transmitters 433.92 MHz, 2 channels. OXI One receiver up to 4 channels with connector, without built-in transmitter. HoppKit For swing gates with leaves up to 2.4 m, ideal for large pillars. Irreversible electromechanical 24 Vdc gear motor with articulated arm, surface mounted. Ideal for intensive use. Powerful thanks to the 250 Nm torque. Resistant and compact: 180 mm in width, ideal for any kind of post. Small shockproof body with aluminium base. Sturdy, aluminium anti-shearing arm. Easy to install: thanks to the new fixing bracket with quick connector for the motor. No welding. Sophisticated electronics with the built-in control unit, just 3 keys to manage all programming operations: • obstacle detection and possibility of connecting to 8.2 KOhm sensitive edge • automatic fault diagnostics • memorisation of opening and closing travel limits in self-learning mode • possibility of configuring the stop input in self-learning mode, NO, NC and the latest generation 8.2 KOhm resistive sensitive edges • deceleration on opening and closing • simple connection of pairs of additional photocells Technical specifications Code Electrical data Power supply (Vac 50 Hz) Power supply (Vdc) Current (A) Power (W) Performance data Speed (Rpm) Torque (Nm) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) Dimensions HO7124 HO7224 230 1.4 280 24 6 100 1.68 250 35 54 -20 ÷ +50 252x180x290 h 9 * Version without control unit, only if associated with PP7124. 28 • programming of pause time • pedestrian open and partial open • clutch with anti-crushing safety mechanism. Energy saving with no black outs: with metal lock and personalised Nice key. With provision for cable control. Everything under control: operation with Opera system BUS T4 allows for programming, control and diagnostics of the automation both on site and remotely. Utilisation limits Max. gate weight (kg) Two irreversible 24 Vdc versions with micrometric adjustment of mechanical stops on opening and closing: with built-in control unit (HO7124) and without control unit (HO7224). Max. gate length (m) 6.5 The shape, the height of the gate and the weather conditions can considerably reduce the values shown in the graph above. Approximate draft. Flashing light Solar panel Photocells Battery box Hopp Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Exclusive design and sophisticated electronics. Powerful, rugged and easy to install, to offer top performance ratings. HoppKit 1 Up to 2.4 m, including: HK7024 One irreversible electromechanical gear motor 24 Vdc, complete with articulated arm and built-in control unit. HK7224 One irreversible electromechanical gear motor 24 Vdc, complete with articulated arm and without control unit. ON2E Two transmitters 433.92 MHz, 2 channels. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. MLBT One flashing light with integrated aerial. OXI One receiver up to 4 channels with connector, without built-in transmitter. 29 Selection guide Follow the arrow and choose the right kit For sliding gates with rolling code transmitters and motors equipped with BlueBus technology: RB400KCE to 400 kg electromechanical limit switch RobusKit 1 inductive limit switch RobusKit 2 electromechanical limit switch RobusKit 3 inductive limit switch RobusKit 4 to 1500 kg electromechanical limit switch RunKit 1 to 1800 kg electromechanical limit switch RunKit 2 inductive limit switch RunKit 3 electromechanical limit switch RunKit 4 to 600 kg Weighing up to 1000 kg with inverter to 2500 kg inductive limit switch 30 RunKit 6 RunKit 5 Robus 400 Robus 600 Robus 1000 Run 31 RobusKit 400 For sliding gates weighing up to 400 kg User-friendly: Nice BlueBUS technology powers and controls a maximum of seven couples of photocells from the MoonBus series using only two wires. Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus. Advanced: RB400 is equipped with a temperature sensor which adapts the motor power to the climatic conditions and enables a thermal cut-out if necessary. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. A flashing light indicates the nature of any problem occurring in the system. Technical specifications Code Electrical data Power supply (Vac 50 Hz) Current (A) Power (W) Performance data Speed (Rpm) Torque (Nm) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) 32 Dimensions RB400 230 1.1 250 0.34 400 35 44 -20 ÷ +50 330x195x277 h 8 Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Sturdy: base and release handle in pressure die cast aluminium and epoxy paint finish. Very quiet: gear motor on bearings. Flashing light Approximate draft. Solar panel Battery box Photocells Robus Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. User-friendly thanks to BlueBUS technology. Sturdy and very quiet, for sliding gates weighing up to 400 kg. RobusKit 400 Up to 400 kg, including: RB400 One irreversible electromechanical gear motor, 24 Vdc, with incorporated control unit, electromechanical limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. MLBT One flashing light with integrated aerial. OXI One receiver up to 4 channels with connector, without built-in transmitter. 33 RobusKit 600/1000 For sliding gates weighing up to 600 kg (RB600/RB600P) and up to 1000 kg (RB1000/RB1000P) User-friendly: Nice BlueBUS technology powers and controls a maximum of seven couples of photocells from the MoonBus series using only two wires. Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor. Advanced: RB600 is equipped with a temperature sensor which adapts the motor power to the climatic conditions and enables a thermal cut-out if necessary. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. A flashing light indicates the nature of any problem occurring in the system. Technical specifications Code Electrical data Power supply (Vac 50 Hz) Current (A) Power (W) Performance data Speed (m/s) Force (N) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) Dimensions RB600/600P * This value changes according to the gate weight. 34 RB1000/1000P 230 2.5 515 2.3 450 0.31 600 40 0.28 900 50 44 -20 ÷ +50 330x210x303 h 11 13 Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Sturdy: base and release handle in pressure die cast. Very quiet: gear motor on bearings. Approximate draft. Solar panel Battery box Photocells Robus Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Highly sophisticated electronics and ultra-safe mechanics for the automation of sliding gates up to 1000 kg. 35 RobusKit For a single gate RobusKit 1 Up to 600 kg, including: RB600 One irreversible electromechanical gear motor, with incorporated control unit, with electromechanical limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. RobusKit 2 Up to 600 kg, including: RB600P One irreversible electromechanical gear motor, with incorporated control unit, with inductive limit switch. 36 ON2E Two transmitters 433.92 MHz, 2 channels. RobusKit 3 Up to 1000 kg, including: RB1000 One irreversible electromechanical gear motor, with incorporated control unit, with electromechanical limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. RobusKit 4 Up to 1000 kg, including: RB1000P One irreversible electromechanical gear motor, with incorporated control unit, with inductive limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. 37 RunKit For sliding gates weighing up to 1500 kg (RUN1500), up to 1800 kg (RUN1800) and up to 2500 kg (RUN2500). Electromechanical gear motor with Nice BlueBUS technology. Ventilated motor with inductive limit switch (RUN1500P/RUN1800P/ RUN2500P) or electromechanical limit switch (RUN1800/RUN2500I/ RUN2500). Suitable for operation in extreme conditions and in systems that require intensive use. Simple to install: the BlueBUS system enables connections by means of just two wires between the control unit and up to 15 control safety and signalling devices. Practical and functional: the control unit and inverter, housed inside Run, can be simply connected by means of the practical connector guide. Safe: the acceleration settings (at the start of the manoeuvre) and the deceleration settings (at the end of the manoeuvre) are precise and reliable. Very quiet: gear motor on bearings. The temperature sensor: Run is able to adapt to different climatic and environmental conditions, while adapting the thermal cut-out protection and intensity of self-ventilation, depending on the temperature reading. A master/slave selection also automatically synchronises 2 motors, enabling the automation of sliding gates with two opposing leafs. 38 Version with built-in inverter (RUN2500I) The inverter enables power supply and activation of the 3-phase motor with single phase 230 Vac current. It also enables variation of the automation speed by simply adjusting the frequency, settable from a minimum of 8.2 m/min to a maximum of 15.4 m/min, to optimise the work load and system performance. Perfect movement: in the automation deceleration phase, the inverter, which communicates with the control unit, increases the torque, thus improving performance and reducing the risk of the automation blocking on impact with obstacles. The acceleration settings (at the start of the manoeuvre) and the deceleration settings (at the end of the manoeuvre) are precise and reliable. The built-in control unit automatically adjusts the manoeuvre speed on the basis of the gate weight (calculated by measuring the force required for the movement), simplifying the operations for checking and ensuring compliance of the automation with standards. Approximate draft. Photocells Run Transmitter Technical specifications Code Electrical data Power supply (Vac 50 Hz) Current (A) Power (W) Performance data Speed (m/s) Force (N) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) RUN1500 RUN1800/1800P RUN2500/2500P RUN2500I 2 400 3 700 3.8 870 3.7 650 0.25 1000 60 1110 1390 42 0.26 1660 56 44 -20 ÷ +50 400x255x390 h 24.5 25 230 19 0.17 Dimensions The strongest model for sliding gates equipped with BlueBUS technology: strong, intelligent and safe, adding unrivalled installation simplicity to the traditional features of Nice. 39 RunKit For a single gate RunKit 1 Up to 1500 kg, including: RUN1500 One irreversible electromechanical gear motor, 24 Vdc, with incorporated control unit, with electromechanical limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. RunKit 2 Up to 1800 kg, including: RUN1800 One irreversible electromechanical gear motor, with incorporated control unit, with electromechanical limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. RunKit 3 Up to 1800 kg, including: RUN1800P One irreversible electromechanical gear motor, with incorporated control unit, with inductive limit switch. 40 ON2E Two transmitters 433.92 MHz, 2 channels. RunKit 4 Up to 2500 kg, including: RUN2500 One irreversible electromechanical gear motor, with incorporated control unit, with electromechanical limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. MOFB One couple of outdoor photocells designed for connection via Nice BlueBUS. OXI One receiver up to 4 channels with connector, without built-in transmitter. RunKit 5 Up to 2500 kg, including: RUN2500P One irreversible electromechanical gear motor, with incorporated control unit, with inductive limit switch. ON2E Two transmitters 433.92 MHz, 2 channels. RunKit 6 Up to 2500 kg, including: RUN2500I One irreversible electromechanical gear motor, with built-in control unit and inverter, electromechanical limit switches. ON2E Two transmitters 433.92 MHz, 2 channels. 41 Selection guide Follow the arrow and choose the right kit For garage doors SpinbusKit 1 for sectional doors up to 10.5 m2 and up-and-over garage doors up to 11.8 m2 SpinbusKit 2 For sectional doors and up-and-over garage doors, belt drive with Nice BlueBUS technology SpinbusKit 3 for sectional doors up to 17.5 m2 and up-and-over garage doors up to 14.7 m2 SpinbusKit 4 Barriers NiceBar 42 for bar up to 4 m BarKit 1 for bar up to 6 m BarKit 2 for bar up to 8 m BarKit 3 Spinbus Bar 43 SpinbusKit For sectional doors up to 10.5 m2 and up-and-over garage doors up to 11.8 m2, with Nice BlueBUS technology. Pre-assembled, 3 x 1 m linear guides. Rapid installation-anywhere the adjustable head, cord-type release and cable-controlled, step-by-step release can be fitted in any part of the garage in order to actuate the system without a remote control device and without the need to install wall-mounted control units! User-friendly: the BlueBUS system enables users to connect the photocell couples and control unit using just two wires. Safe: obstacle detection system and automatic programming of the working times. Motor absorption is monitored during movement; a flashing light indicates the nature of any problem occurring in the system. SN6021 230 0.8 250 0.20 650 50 40 -20 ÷ +50 311x327x105 h 3.6 Utilisation limits Using the maximum travel Non-projecting upand-over door SPINBUSKIT 44 Luminous: 21 W lamp. Dimensions Technical specifications Code Electrical data Power supply (Vac 50 Hz) Current (A) Power (W) Performance data Speed (m/s) Force (N) Work cycle (cycles/day) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) Acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Can be connected with latest generation sensitive edges 8.2 KOhm. Projecting up-and-over door Sectional H L H L H L 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 4.4 m Approximate draft. Sectional doors Projecting up-and-over doors Spinbus Spinbus Transmitter Transmitter Non-projecting up-and-over doors Spinbus Transmitter SpinbusKit 1 With BlueBUS technology, including: SN6021 One gear motor with incorporated control unit and plug-in receiver SMXI. ON2E Two transmitters 433.92 MHz, 2 channels. SNA30 3 pieces x 1 metre linear guide. SpinbusKit 2 With BlueBUS technology, including: SN6021 One gear motor with incorporated control unit and plug-in receiver SMXI. ON2E Two transmitters 433.92 MHz, 2 channels. SNA30 1 piece x 3 metre linear guide. 45 SpinbusKit For sectional doors up to 17.5 m2 and up-and-over garage doors up to 14.7 m2 with Nice BlueBUS technology. 230 Vac irreversible electromechanical gear motor, for residential use, with belt drive, 24 Vdc motor, with magnetic encoder. To use with the SNA30 guide. Rapid installation - anywhere! the adjustable head, cord-type release and cable-controlled, step-by-step release can be fitted in any part of the garage in order to actuate the system without a remote control device and without the need to install wall-mounted control units! User-friendly thanks to the BlueBUS system: the BlueBUS system enables users to connect the photocell couples and control unit using just two wires. Safe: obstacle detection system and automatic programming of the working times. Motor absorption is monitored during movement; a flashing light indicates the nature of any problem occurring in the system. Technical specifications Code Electrical data Power supply (Vac 50 Hz) Current (A) Power (W) Performance data Speed (m/s) Force (N) Work cycle (cycles/day) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) 46 Dimensions SN6031 SN6041 230 1.3 350 1.4 370 0.20 800 1000 50 40 -20 ÷ +50 311x327x105 h 3.6 4.7 Acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Can be connected with latest generation sensitive edges 8.2 KOhm. Energy saving: when the system is not being used it will switch over to standby, lowering consumption to just 2 W. Luminous: 40 W lamp can be used as garage lighting. Approximate draft. Sectional doors Projecting up-and-over doors Spinbus Non-projecting up-and-over doors Spinbus Solar panel Spinbus Solar panel Battery box Solar panel Battery box Transmitter Transmitter Battery box Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Utilisation limits Using the maximum travel Non-projecting upand-over door Projecting up-and-over door Sectional H L H L H L SN6031 with SNA30 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 5m SN6041 with SNA30 2.2 m 4.2 m 2.8 m 4.2 m 2.4 m 5.2 m Quick installation in all spaces with the adjustable head. Safe with the obstacle detection. Very quiet while operating. 47 SpinbusKit For garage doors SpinbusKit 3 With BlueBUS technology, including: SN6031 One gear motor with incorporated control unit. ON2E Two transmitters 433.92 MHz, 2 channels. SNA30 1 piece x 3 metre linear guide. SMXI One receiver up to 4 channels with 256-codes memory. SpinbusKit 4 With BlueBUS technology, including: SN6041 One gear motor with incorporated control unit. 48 ON2E Two transmitters 433.92 MHz, 2 channels. SNA30 1 piece x 3 metre linear guide. SMXI One receiver up to 4 channels with 256-codes memory. M-BarKit Electromechanical road barrier system for control of road access. 24 Vdc gear motor with built-in control unit and loop detector. For bars up from 3 to 7 m. Possibility for intelligent control of two opposing automations thanks to “master/slave” function. More comfort and safety in programming and maintenance phases: the separate enclosures for electronics and mechanics protect internal parts from potential risks. Strength and reliability: robust structure in steel, new high strength balancing springs guaranteed up to 1,000,000 opening and closing operations and elliptical section bar with high wind-gust resistance. Rapid and easy access to the control unit located in the upper section of the barrier body. Simple fixture of the completely concealed photocells onto the specially designed seats on the barrier body. Optional flashing or traffic light can be integrated in cover. More safety and reliability: obstacle detection and monitoring of motor absorption during automation movement. Modular: bars are easily assembled using the aluminium expansion joint. Encoder movement control and electromechanical limit switches. Technical specifications Code Electrical data Power supply (Vac 50/60 Hz) Power supply (Vdc) Current (A) Power (W) Performance data Speed mim. ÷ max. (s) Torque (Nm) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) 50 Automatic fault diagnostics during operation with consequent signalling of fault type through specific flash sequences. Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance). Energy saving: the system sets to standby when not in use to save consumption. No blackouts: emergency backup power with the optional batteries housed inside the case. Release from side with metal key, can be installed on either side. SolemyoKit (Optional) M5BAR M7BAR 230 24 1.1 110 3÷6 200 350 6 ÷ 10 300 200 40 -20 ÷ +50 400x299x1215 h 80 85 SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. Approximate draft. M-Bar Solar panel Battery box Transmitter BarKit 1 Up to 4 m, including: M5BAR One gear motor with incorporated control unit and plug-in receiver SMXI. XBA14 One white paintfinished aluminium bar 69x92x4150 mm. WA10 Red adhesive reflector strips (24 pcs). WA11 One adjustable stand for bars. XBA9 One expansion joint. WA10 Red adhesive reflector strips (24 pcs). BarKit 2 Up to 6 m, including: M7BAR One gear motor with incorporated control unit and plug-in receiver SMXI. XBA15 Two white paintfinished aluminium bar 69x92x3150 mm. WA11 One adjustable stand for bars. 51 L-BarKit Electromechanical road barrier system for control of road access. 24 Vdc gear motor with built-in control unit and loop detector. For bars up from 3 to 7 m. Possibility for intelligent control of two opposing automations thanks to “master/slave” function. More comfort and safety in programming and maintenance phases: the separate enclosures for electronics and mechanics protect internal parts from potential risks. Strength and reliability: robust structure in steel, new high strength balancing springs guaranteed up to 1,000,000 opening and closing operations and elliptical section bar with high wind-gust resistance. Rapid and easy access to the control unit located in the upper section of the barrier body. Simple fixture of the completely concealed photocells onto the specially designed seats on the barrier body. Optional flashing or traffic light can be integrated in cover. More safety and reliability: obstacle detection and monitoring of motor absorption during automation movement. Modular: bars are easily assembled using the aluminium expansion joint. Encoder movement control and electromechanical limit switches. Technical specifications Code Electrical data Power supply (Vac 50/60 Hz) Current (A) Power (W) Performance data Speed (s) Torque (Nm) Work cycle (cycles/hour) Dimensional and general data Protection level (IP) Working temp. (°C Min/Max) Dimensions (mm) Weight (kg) 52 LBAR 230 1.3 160 8 ÷ 12 400 150 44 -20 ÷ +50 500x299x1215 h 93 Automatic fault diagnostics during operation with consequent signalling of fault type through specific flash sequences. Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance). Energy saving: the system sets to standby when not in use to save consumption. No blackouts: emergency backup power with the optional batteries housed inside the case. Release from side with metal key, can be installed on either side. Approximate draft. L-Bar Solar panel Battery box Transmitter SolemyoKit (Optional) SYP One photovoltaic solar panel for 24 V power supply. PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. For controlling access in public and private parking areas, even where traffic is heavy. BarKit 3 Up to 8 m, including: LBAR One gear motor with incorporated control unit and plug-in receiver SMXI. XBA14 Two white paintfinished aluminium bar 69x92x4150 mm. XBA9 One expansion joint. WA10 Red adhesive reflector strips (24 pc). WA11 One adjustable stand for bars. 53 Solemyo Solemyo is the solar power kit for the automation of gates, garage doors and road barriers, including those located far from the mains power. The kit contains: • the SYP photovoltaic panel that converts sunlight into electricity; • the PSY24 battery box, storing the electrical energy produced by the SYP panel, with continuous and permanent supply throughout the day. Installable anywhere without the need for power connections or excavations, even in the most remote locations or those difficult to access with mains power. Increased savings and respect for the environment thanks to solar energy, free and clean: an ecological and intelligent choice with long term benefits. Low consumption with no risk of blackouts: extended duration of energy reserve, combined with low consumption of automations, guarantee operation also in prolonged overcast conditions. Technical specifications Code Round the clock, operation with low power consumption! Perfect operation ensured even at night time or in prolonged overcast conditions, guaranteeing comfort and safety. The SYA1 auxiliary power supply unit enables rapid battery charging via a 230 Vac power mains, as an alternative to the photovoltaic module. Battery charge status led indicators. Support panel PSY24 SYP SYA1 Power supply (Vac 50/60 Hz) 110 ÷ 240 Rated voltage (V) 24 Maximum current (A) 10 Peak power (Wp) 15 Maximum power (W) 60 Rated battery capacity (Ah) 20 Protection level (IP) 44 Working temp. (°C Min/Max) -20 ÷ +50* -40 ÷ +85 0 ÷ +40 Complete recharging time (hours) ~ 15** Dimensions (mm) 235x170x258 h 390x28x415 h 132x58x30 h Weight (kg) 14 1.9 0.345 * 0 ÷ 40 if recharged from the power mains with SYA1 power supply unit. ** Using the power supply unit via the mains. Flexible: Solemyo adapts perfectly to all types of installations. 54 SolemyoKit Including: SYP One photovoltaic solar panel for 24 V power supply. Optional Accessory: PSY24 One 24 V battery box with control circuit and carry handle. SYA1 One power supply unit for charging the battery PSY24 from the supply mains. SYP30 One photovoltaic panel for 24 V supply with maximum power 30 W. Increased savings and environmentally friendly. Easy installation on sites located far from mains power. 55 Accessories to complete your automation Nice control systems: stylish transmitters for gates and doors Era One Simplicity for Opera System. 1, 2, 4 and 9 channel transmitters with management of Identity Codes and Certificates, self-learning function and built-in proximity receiver. The ideal solution for the management of multi-user systems. Era FloR A best seller revamped with a stylish design. 1, 2 and 4 channel transmitters 433.92 MHz, rolling code system with self-learning function and sequential code for multiple insertion. Era Inti Fashionable, miniature transmitters. 1 and 2 channel transmitters 433.92 MHz, rolling code system with self-learning function. Available in 6 different colors. Switches and selectors Moontouch Range of digital and key switches, proximity sensor reader for transponder card. Opera System, advanced management of automation systems even from a distance Software “O-View Software Suite” Nice Motors designed for: <<< BUS T4 OX4T universal 4-channel receiver with built-in transmitter. For remote control of any automation, irrigation and lighting systems or other electrical circuits. OVBTGSM + GSM Software “O-Box Software Suite” Era One Transmitters One Receivers O-Box B O-Box (USB) 56 O-Box connection interface which, thanks to the “O-Box Software Suite”, enables the configuration and programming of all Nice control devices, from the PC or PDA. Rolling shutters Garage Doors Gates Barrier Gates lighting systems Irrigation systems Control accessories: versatile and practical range FT210 Optical device adjustable at 210° horizontally and 30° vertically. With relay output or BlueBUS technology. F210 Synchronised photocells adjustable at 210° horizontally, with relay output or BlueBUS technology. Moon Fixed or adjustable, synchronised photocells with BlueBUS technology (MoonBus). Moonlight and Wallyght Modular flashing signal light and multi-function Led indicator. Wireless Solemyo Air Net System Era Photocell Solemyo Wireless photocells powered by built-in photovoltaic cells. Era TCW Solemyo Wireless sensitive edge, with photovoltaic cells and rechargeable battery. ! W E N Era Light Solemyo Led courtesy light and flashing signal light, powered by built-in photovoltaic cells. High efficiency diffuser. Era-Post Aluminium Posts for Era Photocells. Battery chargers for long-lasting operation PS124 24 V battery with integrated battery charger. PS324 24 V battery with integrated battery charger (for motor in 24Vdc version). Racks for sliding gates Plastic racks are available for gates up to 500 kg and galvanised racks, ideal for any type of sliding gate, residential and industrial. Roa6 M4 25x20x1000 mm slotted nylon rack with metal insert for gates weighing up to 500 kg. Roa8 M4 rack, 30x8x1000 mm, zinc coated with spacers and screws. 57 Site assessment 58 Swing gates Data collection Date ...................................................... Company ............................................................................................................ Name...................................................... Ph.............................. Fax .............................. Estimates will be calculated using only the information supplied. * Compulsory fields 1 *Gate 4 Place 7 Existing New 1 leaf 2 leaves Private house Residential use Industrial settlement Windy area Highly windy area Underground installation Articulated arm Kind of automation Worm screw 2 *Gate structure 5 Use 8 10 Wired key switches Control Wireless key switches accessories Push buttons Proximity sensor reader Wood Aluminium PVC Residential Semi-intensive Intensive Work cycles a day (approximate) Number of users (approximate) Yes Pedestrian No crossing (Opening only one leaf) Radio remote controls Keypads Metal Yes 11 No Remote Number of buttons control needed per transmitter for other uses (lighting…) Other: 3 Solid 6 Inwards *Weight Fretworked and surface Semi-fretworked of gate *Opening 9 Approximate leaf weight Outwards Opening towards the wall yes no Angle opening For outdoors Photocells Flush-mounted Sensitive edges Safety accessories Flashing light 12 13 Further: Further information Automatic Functioning Semi-automatic Automated 14 *Measurements Angle opening __________° Angle opening __________° 59 Sliding gates Data collection Date ...................................................... Company ............................................................................................................ Name...................................................... Ph.............................. Fax .............................. Estimates will be calculated using only the information supplied. * Compulsory fields 1 *Gate 4 Use 7 Existing New 1 leaf 2 leaves Residential Semi-intensive Intensive Work cycles a day (approximate) Number of users (approximate) 2 3 *Weight 5 *Sliding / opening Place By a wall By a grate Slide 11 60 Industrial use Yes No Radio remote controls Yes For outdoors Flush-mounted Keypads No Sensitive edges Further 8 Wired key switches Control Wireless key switches accessories Push buttons Proximity sensor reader Other: *Measurements 6 Pedestrian crossing Residential use Photocells: Safety Flashing light accessories 10 yes no Private house Further information: 9 Remote control for other uses (lighting…) Number of buttons needed per transmitter Garage doors Data collection Date ...................................................... Company ........................................................................................................... Name...................................................... Ph.............................. Fax .............................. Estimates will be calculated using only the information supplied. * Compulsory fields 1 *Door 4 Use 7 Existing Metal Private house New Wood Residential use Sectional Projecting up-and-over door Non-projecting up-and-over door Residential Semi-intensive Intensive Work cycles a day (approx.) Number of users (approximate) 2 Aluminium *Door structure *Place Wall Double walled Yes 5 Yes 6 No *Opening onto a street 3 Industrial use No Door with pedestrian way If Yes, provide for a safety device Yes Photocells: Radio remote controls No For outdoors Flush-mounted Keypads 8 External release Sensitive edges Safety Flashing light accessories Further: 9 Wired key switches Control Wireless key switches accessories Push buttons Proximity sensor reader Other: 10 Yes Remote control No for other uses (lighting…) Number of buttons 13 11 *Technical specification needed per transmitter Sectional Measurements Door width (mm) Door height (mm) Projecting up-and-over door B A 12 * Further information: Non-projecting up-and-over door B A B A A= B= 61 Barriers Data collection Date ...................................................... Company ........................................................................................................... Name...................................................... Ph.............................. Fax .............................. Estimates will be calculated using only the information supplied. * Compulsory fields 1 Work cycles a day 4 Yes Use Number of users (approx.) *Maximum No height If yes, mark max height 2 Barrier 5 Yes *Configuration *Heavy loads transit Photocells 7 Safety accessories 10 Flashing light Further: Further information: 11 * Measurements A 62 3 Barriers set opposite each other Entry width (mm) If 2 barriers: Simultaneous control Individual control 6 No Request No opening time Windy area 8 Place Standing post Highly windy area (compulsory for tubular aluminium bar) Bar release: yes / no 9 Accessories Specification: bar tubular rectangular section bar Yes yes no Magnetic lock Signalling lights LED (compulsory for rectangular section bar) Buffer buttery Other We design and control your Nice world Outstanding solutions for all automation needs Nice products are popular with customers because they are easy to install and use, thanks to a product range that combines innovation and style: For alarm systems For blinds and rolling shutters For venetian blinds 1. technology for the installer 2. convenience for the user 3. simplicity for everyone With Nice, gates, garage doors, awnings and roller shutters are always under control, just like lighting and now alarms systems too. For industrial doors For gates For garage doors For road barrier systems For parking systems For lighting systems 63 Product Design Roberto Gherlenda Printed by Nice Headquarters, Oderzo - Italy Nice Uk, Sutton in Ashfield Nice Acoustic test chamber Nice Semi-anechoic test chamber Nice ensures: • excellent service • quality technical support • face to face contact to build long-term partnerships with its customers Nice Automatic Entrance Systems are: • easy and fast to install • compliant with the relevant European Directives, EN 17025 standards • focused on design and innovation Nice services on hand! Reliable Security Products Ltd 1 - 3 Cian Park Industrial Estate, Drumcondra, Dublin 9, Ireland www.rspl.ie www.niceforyou.com DEP3301-UK/01/05-13 Distributor in Ireland: The information shown in this publication is purely indicative. Nice reserves the right to make any modifications to the products as it sees fit.