Transcript
Nickel Metal Hydride Batteries Technical Catalog
Ni-MH High Temperature Batteries
Panasonic
Ni-MH – High Temperature Battery Family
Cylindrical for back-up use Diameter AAA A
Size
IEC
Model Number
Nominal Voltage (V)
Discharge Capacity*1 (mAh)
AAA
HR11/45
HHR-60AAAH/FT
550
Rated (Min.) 500
A
HR17/50
HHR-210AH/FT
2,050
1,900
–
HHR-370AH/FT
3,700
3,500
–
HHR-330APH/FT
3,300
3,200
LFat/A
1.2
Average*2
Dimensions with Tube (mm) Diameter
Height
Approx. Weight (g)
10.5+0/-0.7
44.5+0/-1.0
13
17.0+0/-0.7
50.0+0/-1.5
36
18.2+0/-0.7
67.0+0/-1.5
60 55
SC
SC
HR23/43
HHR-250SCH/FT
2,650
2,500
23.0+0/-1.0
43.0+0/-1.5
C
C
HR26/50
HHR-300CH/FT
3,300
3,000
26.0+0/-1.0
50.0+0/-2.0
80
F
F
HR33/90
HHR-1100FH/FT
12,000
11,000
33.0+0/-1.0
240
V
V
–
HHR-10000VH/FT*3
95,000
90,000
62.0+0/-1.0
91.0+0/-1.5 175.0+0/-2.0
1,620
*1 After charging at 0.1 It for 16 hours, discharging at 0.2 It. *2 For reference only. *3 Customer specification is required.
Panasonic expands the line of NiMH cells that are superior to standard NiMH products in applications with lowrate charge at high temperatures. Improvements were made in existing Panasonic NiMH cells to the negative plate alloy and separator fiber density. A new electrolyte composition was achieved to improve performance. Superior long-life characteristics can be achieved when combined with appropriate intermittent charge control circuitry. The intermittent charge consumes 1/30th the electricity compared to trickle charge and more than doubles the expected life of the NiMH cells compared to NiCd cells that have been trickle charged. These high performance industrial batteries are cadmium-free.
Features
Applications
— Higher capacity in a smaller size and ligther weight than other battery back-up solutions (Lead-Acid, NiCd) — Efficient Charging at high temperatures (up to 60°C) — 8-12 year expected life when used with the proper charge control circuitry — Heat resistent — Trickle charge technology — Reliability
— Network storage-cache memory back-up — Uninterruptable power supply units (UPS) — Emergency lights — Communication base stations (Micro cell, Pico cell) — Safety technology — Combined solar applications — Portable medical equipment
About the Model Number (an example)
HHR60 AAA H/FT Cap shape: This appendix is used when there is a flat top (HT stands for high top battery). High temperature battery type Diameter: AAA, AA, A, SC, C, F, V Multiply this by 10 to obtain the rated capacity (some exceptions) R=cylindrical Panasonic Nickel Metal Hydride Battery
Nickel Metal Hydride Batteries
2
Panasonic Examples of characteristics Charging Characteristics by Temperature (H-Type vs. Standard Ni-MH Cell)
Cycle Life Characteristics (H-Type vs. Valve Regulated Lead-Acid Batteries) 120 Ni-MH
Capacity Ratio (%) (100% = Nominal Capacity)
Charging Efficiency (%)
100 80 ------- HHR210AH (“H“ Type Ni-MH) –––––– HHR210A (Standard Ni-MH)
60 40 20
Test condition Charge: 0.1lt x 15h Rest: 3h Discharge: 0.2lt to1.0 V at 25°C Discharge capacity charged at 25°C is 100
35
40
80 60
VRLA
40 20 Depth of Discharge 50%
0 20 25 30
100
45
50
55
0
60
0
100
Ambient Temperature During Charging (°C)
300 400
500
600 800
900 1000 1100 1200 1300 1400 1500
Charge/Discharge Cycles
Cycle Life Characteristics (H-Type vs. Standard Ni-MH Cell)
Charging Efficiency (%)
120 100 80 ------- HHR210AH (“H“ Type Ni-MH) –––––– HHR210A (Standard Ni-MH)
60 40
Test condition (1) Capacity check Charge: 0.1lt x 16h Rest: 1h Discharge: 0.2lt to1.0 V (2) Cycle testing Charge: 0.25lt x 3h10m Rest: 0h Discharge: 0.25lt x 2h20m
20 0 0
200
400
600
800
1000
1200
1400
Cycles
Ni-MH High-Temperature Series Recommended Charge for back-up power applications Example of intermittent timer charger system: Average Charge Current: 0.1ltA Re-charge Time: 16 hours Pulse charging can be used
The optimal charge system for the Ni-MH ’’H’’ Series for back-up power applications is an intermittent timer charge. An intermittent timer charge improves charge efficiency, extends battery life(-vs- trickle charge) and reduces electricity consumption up to 30% compared to *trickle charge.
Intermittent Charge (Ambient Temp 20°C) Voltage (V)
Intermittent Timer Charge: (see diagram) At the beginning of the charge, an IC timer is started and charging is activated at a current of 0.1lt until the timer stops and the charge is terminated. When the batteries self discharge down to a set point (1.3V), the timer charge is re-activated.
Initial charge
Discharge (Self discharge)
Charge
Current (mA)
Discharge (Self discharge)
7 days
0.1lt*4h
0.1lt*4h
Capacity (mAh)
*Trickle charge is not recommended for Ni-MH batteries. Please consult Panasonic on any Ni-MH applications requiring trickle charge.
0.1lt*16h
Charge
펁 펁
7 days
Discharge (Self discharge)
3
Nickel Metal Hydride Batteries
Panasonic
Individual Data Sheets
HHR60AAAH/FT Cylindrical AAA size (HR11/45) for back up use Dimensions (with tube)
Typical charge characteristics
(mm)
+0
10.5 - 0.7
2.0 Charge: 50mA X 16hrs. 1.8
Voltage (V)
(+)
1.6 1.4 1.2
10°C 25°C
1.0
+0 44.5 1.0
-
60°C
0.8 0
2
4
6
8
10
12
14
16
18
50
60
20
Charge time (hours)
(-)
120 110
Capacity (%)
100
Specifications Diameter Height Approximate Weight
10.5+0 / -0.7mm 44.5+0 / -1.0mm 13g
Nominal Voltage *1
Discharge Capacity
Average
50 40 30
-20
-10
0
10
20
30
40
70
Temperature °(C)
35m⏲
Rapid
*3
Typical discharge characteristics
50mA X 16hrs. 250mA X 2.4hrs.
Low rate
25mA X 32hrs. 17mA X 48hrs. 2.0
Standard Rapid Low rate Discharge
-10°C to 60°C -10°C to 45°C -10°C to 60°C
<1 year
-20°C to 35°C
<6 months
-20°C to 45°C
<1 month
-20°C to 55°C
<1 week
-20°C to 65°C
1.6 1.4 1.2 1.0 0.8
0
1
2
3
4
Discharge time (hours)
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. *3 Please consult Panasonic for details of dT/dt. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and unit design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
Nickel Metal Hydride Batteries
Charge: 50mA X 16hrs. 25°C Discharge: 100mA 10°C 25°C 60°C
1.8
Voltage (V)
Ambient Temperature
Charge: 50mA X 16hrs. Charge temperature: -10 to 60°C Discharge: 100mA Cut of voltage: 1.0V Discharge temperature: 25°C
60
500mAh
Rated (min.)
Standard
Storage
70
550mAh
1000Hz at charged state.
Charge
80
1.2V *2
Approx. Internal impedance at
Charge
90
4
5
6
Panasonic
Individual Data Sheets
HHR210AH/FT Cylindrical A size (HR17/50) for back up use Dimensions (with tube)
Typical charge characteristics
(mm)
2.0
+0
Charge: 210mA X 16hrs.
17.0 - 0.7
1.8
Voltage (V)
(+)
1.6 1.4 1.2
10°C 25°C
1.0
60°C
0.8
+0
0
50.0 - 1.5
2
4
6
8
10
12
14
16
18
20
Charge time (hours)
(-)
120
Capacity ratio (%)
110
Specifications Diameter Height Approximate Weight
17.0+0 / -0.7mm 50.0+0 / -1.5mm 36g
Nominal Voltage Discharge Capacity
Average
Rated (min.)
1000Hz at charged state. Standard *3
Rapid
Ambient Temperature
Low rate Standard Charge
Rapid Low rate
Discharge
Storage
80 70
Charge: 210mA X 16hrs. Charge temperature: -10 to 60°C Discharge: 420mA Cut off voltage: 1.0V Discharge temperature: 25°C
60 50
30
-20
-10
0
10
20
30
40
50
60
70
Temperature (°C)
1.2V *2
Approx. Internal impedance at
Charge
90
40
2,050mAh 1,900mAh
Typical discharge characteristics
20m⏲ 210mA X 16hrs. 1,000mA X 2.3hrs. 105mA X 32hrs. 70mA X 48hrs.
2.0
-10°C to 60°C
Charge: 210mA X 16hrs. 25°C Discharge: 420mA 10°C 25°C 60°C
1.8
Voltage (V)
*1
100
-10°C to 45°C -10°C to 60°C
1.6 1.4 1.2
<1 year
-20°C to 35°C
1.0
<6 months
-20°C to 45°C
0.8
<1 month
-20°C to 55°C
<1 week
-20°C to 65°C
0
1
2
3
4
5
6
Discharge time (hours)
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. *3 Please consult Panasonic for details of dT/dt. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and unit design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
5
Nickel Metal Hydride Batteries
Panasonic
Individual Data Sheets
HHR-370AH/FT Cylindrical LFat/A size for back-up use Dimensions (with tube)
Typical charge characteristics
(mm)
+0
18.2 - 0.7 2.0
(+)
Charge: 370mA X 16 hrs.
Voltage (V)
1.8 1.6 1.4 1.2
10°C 25°C 60°C
1.0
+0
0.8
67.0 - 1.5
0
2
4
6
8
10
12
14
16
18
20
60
70
Charge time (hours)
120 110
(-) Capacity ratio (%)
100
Specifications Diameter Height Approximate Weight
18.2+0 / -0.7mm 67.0+0 / -1.5mm 60g
Nominal Voltage Average
-20
-10
0
10
20
30
40
50
Temperature °C
20m⏲
Rapid
*3
Typical discharge characteristics
370mA X 16hrs. 3,000mA X 1.4hrs.
Low rate
Ambient Temperature
40
3,500mAh
Rated (min.)
Standard
Standard Rapid Low rate Discharge
Storage
50
3,700mAh
1000Hz at charged state.
Charge
Charge: 370mA X 16hrs. Charge temperature: -10 to 60°C Discharge: 740mA Cut off voltage: 1.0V Discharge temperature: 25°C
60
1.2V *2
Approx. Internal impedance at
Charge
80 70
30
185mA X 32hrs. 123mA X 48hrs.
-10°C to 45°C -10°C to 60°C -20°C to 35°C
<6 months
-20°C to 45°C
<1 month
-20°C to 55°C
10°C 25°C 60°C
1.6 1.4 2.0 1.2 1.8 1.0 1.6 1.4 0.8
0
1
2
3
4
Discharge time (hours)
-20°C to 65°C
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. *3 Please consult Panasonic for details of dT/dt. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and unit design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
Nickel Metal Hydride Batteries
Charge: 370mA X 16hrs. 25°C Discharge: 740mA
1.8
-10°C to 60°C
<1 year
<1 week
2.0
Voltage (V)
*1
Discharge Capacity
90
6
5
6
Panasonic Panasonic
Individual IndividualData DataSheets Sheets
HHR330APH/FT HHR330APH/FT Cylindrical CylindricalLFat/A LFat/Asize sizefor forback backup upuse use Dimensions (with tube)
Typical charge characteristics
(mm)
+0
18.2 - 0.7 2.0
(+)
Charge: 330mA(0.1lt) X 16 hrs.
Voltage (V)
1.8 1.6 1.4 1.2
10°C 25°C 60°C
1.0
+0
0.8
67.0 - 1.5
0
2
4
6
8
10
12
14
16
18
20
60
70
Charge time (min)
Typical discharge characteristics (-)
120
Specifications
110
18.2+0 / -0.7mm 67.0+0 / -1.5mm 60g
Nominal Voltage Discharge Capacity
1.2V
Average*2
3,300mAh
Rated (min.)
3,200mAh
Approx. Internal impedance at Standard Rapid
*3
Ambient Temperature Ambient Temperature
50 40 2
-10
0
10
20
30
40
50
Temperature °C
1,650mA X 2.4hrs.
Standard Rapid Low rate Discharge
Storage
Charge: 330mA(0.1 lt) X 16hrs. Charge temperature : -10 to 60°C Discharge: 660mA Cut off voltage: 1.0V Discharge temperature: 25°C
60
330mA X 16hrs.
Low rate Charge
80 70
5.5m⏲
1000Hz at charged state. Charge
90
30
165mA X 32hrs. 110mA X 48hrs.
1.8
-10°C to 60°C
1.6
-10°C to 45°C -10°C to 60°C
<1 year
-20°C to 35°C
<6 months
-20°C to 45°C
<1 month
-20°C to 55°C
<1 week
Voltage (V)
*1
Capacity raito (%)
Diameter Height Approximate Weight
100
Charge: 330mA(0.1 It) X 16hrs. 25°C Discharge: 10A, 20A, 25°C
1.4 10 A 20 A
1.2 1.0 0.8 0
5
10
15
20
25
30
Discharge time (hours)
-20°C to 65°C
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. *3 Please consult Panasonic for details of dT/dt. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and unit design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
7
Nickel Metal Hydride Batteries
Panasonic
Individual Data Sheets
HHR-250SCH/FTCylindrical HHR250SCH/FT CylindricalSC SCsize size(HR23/43) (HR23/43)for forback back-up up use use Dimensions (with tube)
Typical charge characteristics
(mm)
2.0 Charge: 250mA (0.1 lt) X 16hrs.
+0 1.0
-
23.0
1.8
(+) Voltage (V)
1.6 1.4 1.2 10°C 20°C 60°C
1.0
+0
43.0 - 1.5
0.8
0
2
4
6
8
10
12
14
16
18
20
Charge time (hours)
(-) 120
Capacity raito (%)
110
Specifications Diameter Height Approximate Weight
23.0+0 / -1.0mm 43.0+0 / -1.5mm 55g
Nominal Voltage Discharge Capacity
Average
Ambient Temperature
50 30 -20
-10
0
10
20
30
40
50
60
70
Temperature (°C)
2,500mAh
Rated (min.)
Typical discharge characteristics
5m⏲
Standard
250mA X 16hrs.
Rapid
1,250mA X 2.4hrs.
Low rate Standard Rapid Low rate Discharge
Storage
Charge: 250mA(0.1 lt) X 16hrs. Charge temperature: -10 to 60°C Discharge: 500mA (0.2 It) Cut off voltage: 1.0V Discharge temperature: 25°C
60
2,650mAh
1000Hz at charged state.
Charge
80 70
1.2V *2
Approx. Internal impedance at
Charge
90
40
125mA X 32hrs. 83mA X 48hrs.
1.8
-10°C to 60°C
1.6
Voltage (V)
*1
100
-10°C to 45°C -10°C to 60°C
<1 year
-20°C to 35°C
<6 months
-20°C to 45°C
<1 month
-20°C to 55°C
<1 week
-20°C to 65°C
1.4 10A 20A
1.2 1.0 0.8
0
5
10
Discharge time (minutes)
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and unit design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
Nickel Metal Hydride Batteries
Charge: 250mA(0.1 It) X 16hrs. 25°C Discharge: 10A, 20A, 25°C
8
15
20
Panasonic
Individual Data Sheets
HHR300CH/FT Cylindrical C size (HR26/50) for back up use Dimensions (with tube)
Typical charge characteristics
(mm)
2.0
26.0
Charge: 300mA (0.1 lt) X 16hrs.
+0 1.0
-
1.8
(+) Voltage (V)
1.6 1.4 1.2 10°C 25°C 60°C
1.0
+0
50.0 - 2.0
0.8
0
2
4
6
8
10
12
14
16
18
20
Charge time (hours)
(-) 120 110
Capacity ratio %
100
Specifications Diameter Height Approximate Weight
26.0+0 / -1.0mm 50.0+0 / -2.0mm 80g
Nominal Voltage Discharge Capacity
Average
Ambient Temperature
30 -20
-10
0
10
20
30
40
50
60
70
Temperature °C
3,000mAh
Rated (min.)
Typical discharge characteristics
5m⏲
Standard
300mA X 16hrs.
Rapid
1,500mA X 2.4hrs.
Low rate
150mA X 32hrs. 100mA X 48hrs.
Standard Rapid Low rate Discharge
Storage
50
Charge: 300mA (0.1 It) X 16hrs. Charge temperature: -10 to 60°C Discharge: 600mA (0.2 It) Cut off voltage: 1.0V Discharge temperature: 25°C
3,300mAh
1000Hz at charged state.
Charge
60
1.2V *2
Approx. Internal impedance at
Charge
80 70
40
1.8 Charge: 300mA(0.1 It) X 16hrs. 25°C Discharge: 10A, 20A, 25°C
1.6
-10°C to 60°C Voltage (V)
*1
90
-10°C to 45°C -10°C to 60°C
<1 year
-20°C to 35°C
<6 months
-20°C to 45°C
<1 month
-20°C to 55°C
<1 week
-20°C to 65°C
1.4 10A 20A
1.2
1.0
0.8
0
5
10
15
20
25
30
Discharge time (minutes)
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and unit design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
9
Nickel Metal Hydride Batteries
Panasonic
Individual Data Sheets
HHR1100FH/FT Cylindrical F size for back-up use Dimensions (with tube)
+0 o / 33.0 –1.0
(+)
(mm)
Typical charge characteristics
1.8
Voltage (V)
1.6 1.4 1.2 1.0 Test Condition Charge: 0.1lt (1.1A) x 15h at 25, 45, 55, 65°C Discharging: 0.1lt (1.1A) at 25°C
0.8
o / 91.0
0.6
+0 –1.5
0
2
4
6
8
25°C 45°C
10
12
14
16
18
Charge time: (hours)
Typical discharge characteristics
(–)
1.8
Specifications
1.6
33.0+0 / -1.0mm 91.0+0 / -1.5mm 240g
Nominal Voltage
1.2V
Average*2 Rated (min)
Maximum Discharge Current
30,000mA
Charge
Rapid*
Ambient Temperature
Low rate Charge
Standard Rapid
(with control system) 550mA x 32hrs. 367mA x 48hrs.
1.8
-10°C to 60°C
1.4
-10°C to 45°C
<1 year
-20°C to 35°C
<6 month
-20°C to 45°C
<1 month <1 week
-20°C to 55°C
0
1
2
2,2A(0.2C)
3
4
5
6
10A 20A 30A
1.6
-10°C to 60°C
1.2 1.0 0.8 Test Condition Charge: 1lt (11A) x 1,2h at 25°C Discharging: 2.2A at 25°C
0.6 0.4
0
10
20
30
40
50
Discharge time: (minutes)
-20°C to 65°C
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. *3 Please contact Panasonic for details. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
Nickel Metal Hydride Batteries
Test Condition Charge: 1lt (11A) x 1,2h at 25°C Discharging: 2.2A at 25°C
1,100mA x 16hrs. 5,500mA x 2.4hrs.
Low rate Discharge
Storage
0.8
Discharge time: (min.)
5mΩ
3
1.0
0.4
11,000mAh
Approx. Internal impedance at 1000Hz at charged state
Standard
1.2
0.6
12,000mAh
Voltage (V)
* Discharge Capacity 1
1.4
Voltage (V)
Diameter Height Approximate Weight
10
60
70
80
Panasonic
Individual Data Sheets
HHR10000VH/FT Cylindrical V size for back-up use Dimensions (with tube) o / 62.0
(mm)
+0 –1.0
Typical charge characteristics
(+)
1.8
Voltage (V)
1.6 1.4 1.2 1.0 Test Condition Charge: 10A at each temperature
0.8
25°C 45°C
0.6
o / 175.0
0
+0 –2.0
2
4
6
8
10
12
14
16
18
Charge time: (hours)
Typical discharge characteristics
(–) 1.8
Specifications 62.0+0 / -1.0mm 175.0+0 / -2.0mm 1,620g
Nominal Voltage Average*2 Rated (min)
Ambient Temperature
1.1 70mA(0.2lt)
0.8
0
1
2
3
4
5
6
7
8
9
10
11
12
Discharge time: (hours)
1.3mΩ 100A 10A x 10hrs.
(with control system)
20A x 5hrs.
1.6
(with control system)
Standard Rapid
-10°C to 55°C
Low rate
-10°C to 45°C
Discharge
1.2
0.9
90,000mAh
3
Rapid*
1.3
1.0
Condition: Charge: 10A at each temperature
1.5 1.4 1.3 1.2
Voltage (V)
Standard
Storage
1.4
95,000mAh
Maximum Discharge Current
Charge
1.5
1.2V
Approx. Internal impedance at 1000Hz at charged state
Charge
1.6
Voltage (V)
Diameter Height Approximate Weight
*1 Discharge Capacity
Discharge temperature: 20°C
1.7
-10°C to 60°C
<1 year
-20°C to 35°C
<6 month
-20°C to 45°C
<1 month <1 week
-20°C to 55°C
1.1 1.0 30A 50A 70A 100A
0.9 0.8 0.7 0.6
0
30
60
90
120
150
180
210
Discharge time: (minutes)
-20°C to 65°C
*1 After charging at 0.1It for 16 hours, discharging at 0.2It. *2 For reference only. *3 Please contact Panasonic for details. Battery performance and cycle life are strongly affected by how they are used. In order to maximize battery safety, please consult Panasonic when determining charge/discharge specs, warning label contents and design. *The data in this document are for descriptive purposes only and are not intended to make or imply any guarantee or warranty.
11
Nickel Metal Hydride Batteries
For Literature and General Product Information: United Kingdom/Ireland Panasonic Industrial Europe GmbH Willoughby Road Bracknell Berkshire RG12 8FP England Tel: +44 1344-85 32 60 Fax: +44 1344-85 33 13
Spain Panasonic Industrial Europe GmbH Sucursal en España Alcalde Barnils, 64-68, Edificio TESTA Modulo B planta 3a Puerta 2a 08190 Sant Cugat del Valles Barcelona/Spain Tel: +34 93-504 30 10 Fax: +34 93-675 58 92
Italy Panasonic Industrial Europe GmbH Via Lucini 19 20125 Milano Tel: +39 02-6788-232 Fax: +39 02-6788-207
Germany (all other european countries) Panasonic Industrial Europe GmbH Winsbergring 15 22525 Hamburg Tel: +49 40-85 386-157 Fax: +49 40-85 386-238
France Panasonic Industrial Europe GmbH 1– 3 Avenue François Mitterrand 93218 Saint Denis La Plaine Tel: +33 1-55 93 67 10 Fax: +33 1-55 93 67 90
E-mail and Website for all countries:
[email protected] www.panasonic-industrial.com/batteries
Notice to Readers It is the responsibility of each user to ensure that every battery application is adequately designed safe and compatible with all conditions encountered during use, and in conformance with existing standards and requirements.
PANA/CAT-Ni-MH/2007
This literature contains information concerning cells and batteries manufactured by Matsushita Battery Industrial Co., Ltd. This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs are subject to modification without notice.
For more details, please contact:
® Panasonic is a registered trademark of Matsushita Electric Co., Ltd.
P2007. Printed in Germany. This catalog has been produced using un-chlorinated paper.
