Transcript
SPECIFICATIONS SHEET
AT8700 IN-WALL LOUDSPEAKER
8" 3-Way AT Advanced Technology In-wall Loudspeaker • Dual midrange and tweeter array can be rotated and pivoted • Baffle-mounted bass, midrange and treble tone controls with sub-bass boost control for acoustical adjustments
IN-WALL LOUDSPEAKER
8" In-Wall Loudspeaker WOOFER TECHNOLOGY ■ 8" Titanium/aluminum/urethane cone is extremely rigid to reduce breakup and lower distortion even under high power ■ Butyl rubber cone surround damps resonance and provides exceptional durability ■ Sophisticated motor assembly including high BL magnet, bi-filer voice coil windings, extended pole piece, distortion canceling balanced drive and machined top plate for deep bass response and clean bass tones ■ Cast aluminum frame and basket secures drive components to prevent distortion and unwanted harmonics ■ Inverted dust cap for added rigidity and wide mid-bass dispersion
MIDRANGE TECHNOLOGY ■ Dual 1-1/2" titanium/aluminum/urethane hyperbolic dome midrange drivers reproduce critical midrange sounds with exceptional accuracy ■ NDFE 35 neodymium, high BL magnet motor structures enable compact driver construction
AT8700
■ Midrange drivers are housed in a 360° rotating, 30° pivoting DSFG® adjustable array allows installer to control dispersion patterns for optimal response
Stock Number FG00744
TWEETER TECHNOLOGY ■ 1" fluid-cooled titanium/aluminum/urethane hyperbolic dome tweeter reproduces high frequencies and their harmonics with crystal clear accuracy ■ Tweeter is housed in a 360° rotating, 30° pivoting DSFG® adjustable dispersion array allows installer to control dispersion patterns for optimal response
AUDIOPHILE FEATURES ■ Linkwitz-Riley filters with premium crossover components provides seamless driver integration 2002 Audio Video
2002 CES Innovation
■ Low diffraction, X-Matrix™ reinforced polycarbonate Baffle eliminates unwanted resonance
International’s Hi-Fi
Design and
TONE CONTROLS
Grand Prix Award
Engineering Award
■ 4 increment (-2dB, Flat, +2dB, +4dB) bass, midrange and treble controls adjust from the front baffle for fine tuning after installation ■ Sub-Bass Boost control (3dB @ 60 Hz) ■ 1kHz and 3.5kHz selectable LinearTrack™ filters
INSTALLATION ■ 100% rustproof MicroPerf™ aluminum grille conceals loudspeaker elements yet allows full frequency sound through. Grille can be painted to match décor ■ Moisture and UV resistant materials including all stainless steel and brass hardware stand up to harsh environments ■ Infrared sensor knockout provides a hidden remote control solution ■ 6mm low diffraction X-Matrix reinforced polycarbonate baffler resonance for improved dynamic range
SPECIFICATIONS ■ Impedance: 8 ohms (4 ohms minimum) ■ Recommended amplifier power: 20W to 200W ■ Frequency response: 30Hz-21kHz +/-3dB ■ Sensitivity: 89dB for 2.83 pink noise, measured at 1 meter on axis ■ Frame dimensions: 11" x 18-3/8" ■ Hole cutout dimension: 9-3/4" x 17-1/4" ■ Depth behind wall: 3-3/4" deep (based on 1/2" drywall) Warranty: Five-year limited Shipping weight: 11 lbs.
NILES AUDIO CORPORATION 12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 – www.nilesaudio.com ©2004 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation.
NAAT8700PDF
IN-WALL LOUDSPEAKER
Technology DIRECTED SOUND FIELD GEOMETRY MIDWAY AND TWEETER ARRAY Directs the flattest frequency response 15° off axis from the tweeter
ROTATING AND PIVOTING MIDRANGE AND TWEETER ARRAY Enable installers to control dispersion patterns for optimal response and placement flexibility
ADVANCED MATERIAL SCIENCE Elevates performance of sub component parts like woofer cones, tweeter diaphragms and crossover components
SOPHISTICATED MOTOR AND MAGNETIC DESIGN Including high BL magnets, Bi-filer voice coils, extended pole pieces, sophisticated audiophile crossover design, Linkwitz-Riley filters and premium components allow drivers to deliver seamless sound
ACOUSTIC FINE TUNING Sub-bass, bass, midrange, 1 KHZ, 3 KHZ and treble controls optimize system sound for every acoustical environment
ANTI-RESONANT WAVE-BRACING TECHNOLOGY Prevents transmission of woofer vibrations to the baffle and into the drywall for clear and dynamic bass response
Details HOME THEATER SPECIFIC MODELS Deliver voice-matched cinema performance and are compatible with all AT High Definition models
MODULAR MOUNTING SYSTEM Uses innovative mounting technique to simplify installation and ensure uniform contact with wall
BLACK BAFFLES Deliver a seamless appearance after the speakers are installed and the grilles are in place
MICROPERF™ RUSTPROOF ALUMINUM GRILLES Are acoustically transparent yet won’t rust or discolor
DEBRIS SCREENS Block unwanted debris such as fiberglass insulation, sheetrock chips, or other foreign matter from coming in contact with the woofer cone
REQUIRES USE OF BRACKET KIT Use AT8000 bracket kit - FG00746
REQUIRES USE OF FRAME AND GRILLE KIT Use AT8000 frame and grille kit - FG00745
NILES AUDIO CORPORATION 12331 S.W. 130 Street, Miami, FL 33186 Tel: 800.289.4434 – www.nilesaudio.com ©2004 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation.
NAAT8700PDF
