Transcript
Nitro3 catalogue
The newest technology for wireless solutions
Nitro3 has all the features for a fast solution with 802.11ac providing speed up to 1.3Gbps. It is scalable and gives you the best solution for point‐to‐point and point‐to‐multipoint applications in the sub 6Ghz band.
Applications
Telco grade outdoor wireless infrastructure
WISP
Video surveillance (PoE pass‐through)
HotSpot Access Points with Multiple SSID, indoor and outdoor
Technologies
802.11ac 1.3 Gigabit/s
2x2 and 3x3 MIMO OFDM
VLAN tagging
Security: WPA1&2 up to AES 256bit, TKIP, IEEE802.1x
Management
All radios are controllable with a centralized NERA Equipment Controller, enabling large and manageable deployments.
Customer management servers together with gateways and Nitro3 complete a full WISP solution.
Compatibility
Nitro3 is compatible with Nitro2 using 802.11n to communicate.
Mechanical
Power over Ethernet (PoE) delivers power up to 100m over the Ethernet cable and allows the radio to be used in areas where power outlets are not available. PoE input voltage is customizable at order, ranging from 9 to 60VDC and 110‐240VAC. Standard models are delivered with high quality aluminum mounting kit with necessary screws, PoE injector and power cable to fit the specified region delivered to. Models A list of radio models with specifications is found in this document, along with RF specifications and antenna details. NERA offers customizations for models beyond this list.
V1.01 NERA reserves the right to change the specifications without notice.
[email protected] www.witelcom.com
Datasheet
Models Overview Model Name Frequency band WiFi protocol MIMO Antenna gain Beam width External N‐conn Ethernet port
N3‐55‐2C 5GHz 802.11n/ac 2x2 no antenna no antenna 2 1*Gigabit
N3‐55‐3C 5GHz 802.11n/ac 3x3 no antenna no antenna 3 1*Gigabit
N3‐2455‐5C 2.4 & 5GHz 802.11n/ac 2x2 + 3x3 no antenna no antenna 5 1*Gigabit
N3‐PtP‐55‐18 5GHz 802.11n/ac 2x2 18dBi 22° x 22° none 1*Gigabit
N3‐PtP‐55‐23 5GHz 802.11n/ac 2x2 23dBi 11° x 11° none 1*Gigabit
N3‐AP‐55‐90 5GHz 802.11n/ac 2x2 17dBi 90° x 7° none 1*Gigabit
N3‐AP‐55‐90x3 5GHz 802.11n/ac 3x3 16dBi 90° x 8° none 1*Gigabit
Max power consumption Weight, incl. mounting kit Size HxWxD
48V passive & 802.3af/at 9.2w 2.2kg 22x22x8cm
48V passive & 802.3af/at 10.4w 2.3kg 22x22x8cm
48V passive & 802.3af/at 14.4w 2.3kg 22.5x22x8cm
48V passive & 802.3af/at 9.2w 2.2kg 26x26x9.5cm
48V passive & 802.3af/at 9.2w 3.9kg 37x37x9cm
48V passive & 802.3af/at 9.2w 3.5kg 37x37x9cm
48V passive & 802.3af/at 10.4w 3.5kg 37x37x9cm
Model Name Frequency band WiFi protocol MIMO
N3‐CPE‐55‐18 5GHz 802.11n/ac 2x2
N3‐CPE‐55n‐18 5GHz 802.11n 2x2
N3‐CPE‐55n‐17 5GHz 802.11n 2x2
N3‐CPE‐55n‐17‐HS 2.4 & 5GHz 802.11n 2x2
N3‐CPE‐55‐17‐HS 2.4 & 5GHz 802.11n/ac 2x2
N3‐iAP‐single1 2.4GHz 802.11n 2x2
N3‐iAP‐dual1 2.4 & 5GHz 802.11n/ac 2x2
18dBi
17dBi
7dBi, 17dBi
7dBi, 17dBi
4dBi
4dBi, 5dBi
PoE compatibility
Antenna gain
18dBi
Beam width
22° x 22°
22° x 22°
17°x30°
2.4GHz:360°, 5GHz:17°x30°
2.4GHz:360°, 5GHz:17°x30°
360°
360°
External N‐conn Ethernet port
none 1*Gigabit
none 1*Fast Ethernet
none 1*Fast Ethernet
none 1*Fast Ethernet
Passive 24V
Passive 14‐24V
Passive 14‐24V
Passive 14‐24V
9.2w 2.2kg 26x26x9.5cm
5.5w 2.2kg 26x26x9.5cm
5.5w 0.6kg 28x12.3x6cm
8w 0.6kg 28x12.3x6cm
none 1*Gigabit 48V passive & 802.3af/at 12.2w 0.6kg 28x12.3x6cm
none 1*Gigabit 48V passive & 802.3af/at 7.2w 0.6kg 16x16x8cm
none 1*Gigabit 48V passive & 802.3af/at 13.2w 0.6kg 16x16x8cm
PoE compatibility Max power consumption Weight, incl. mounting kit Size HxWxD
Datasheet
N3‐55‐2C Outdoor radio with 2 N‐connectors, no internal antenna.
Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Well suited for use with a dish antenna for long distances. It can also be used with any other type of antenna; directional, omni or sector.
Picture showing model with 2 RF cables mounted on the N‐connectors.
5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 Depends on connected ant. no antenna no antenna 2 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
9.2w 2.2kg 22x22x8cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #01
V1.01
Datasheet
N3‐55‐3C Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with 3 N‐connector, no internal antenna.
To be used with 2x2 or 3x3 MIMO antennas of any choice. 3x3 is well suited as HotSpot AP with 3 omni antennas.
Picture showing model with covered N‐connectors.
5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 3x3 Depends on connected ant. no antenna no antenna 3 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
10.4w 2.3kg 22x22x8cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #02
V1.01
Datasheet
N3‐2455‐5C Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor dual radio with 2 connectors for 2.4GHz and 3 connectors for 5GHz, no internal antenna.
Designed to be an outdoor dual Access Point with 5 omni antennas connected directly on the enclosure, providing 2.4 & 5GHz coverage simultaneously. Can also be used with combinations of antennas, e.g. directional, sector or omni.
Picture showing model with 5 omni antennas.
2.4 & 5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 + 3x3 Depends on connected ant. no antenna no antenna 5 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
14.4w 2.3kg 22.5x22x8cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #02 and #05
V1.01
Datasheet
N3‐PtP‐55‐18 Outdoor radio with internal 18dBi antenna.
Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Designed for PtP short distance, and can also be used as a powerful CPE.
5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 V+H 18dBi 22° x 22° none 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
9.2w 2.2kg 26x26x9.5cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #01
Datasheet
N3‐PtP‐55‐23 Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 23dBi antenna.
Designed for PtP medium distance.
5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 V+H 23dBi 11° x 11° none 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
9.2w 3.9kg 37x37x9cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #01
Datasheet
N3‐AP‐55‐90 Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 90 degree sector antenna.
Designed to act as an Access Point for PtMP, covering a sector up to 10km. 5km sectors are recommended for high demanding WISP solutions.
5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 V+H 17dBi 90° x 7° none 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
9.2w 3.5kg 37x37x9cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #01
Datasheet
N3‐AP‐55‐90x3 Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 90 degree sector antenna.
Designed to act as an Access Point for PtMP with 3 antenna Polarizations.
5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 3x3 2V+1H 16dBi 90° x 8° none 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
10.4w 3.5kg 37x37x9cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #03
V1.01
Datasheet
N3‐CPE‐55‐18 Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 18dBi antenna.
Designed to act as a CPE in PtMP scenarios.
5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 V+H 18dBi 22° x 22° none 1*Gigabit Passive 24V 100‐240V AC, 50/60Hz
9.2w 2.2kg 26x26x9.5cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #01
V1.01
Datasheet
N3‐CPE‐55n‐18 Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 18dBi antenna.
Designed to act as a CPE in scenarios such as e.g. WISP and surveillance.
5GHz 802.11n 20, 40 MHz 23dBm 2x2 V+H 18dBi 22° x 22° none 1*Fast Ethernet Passive 14‐24V 100‐240V AC, 50/60Hz
5.5w 2.2kg 26x26x9.5cm 30‐70mm IP67 > 200 km/h ‐20°C to 70°C Alu Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #04
V1.01
Datasheet
N3‐CPE‐55n‐17
Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 17dBi antenna.
Designed to act as a CPE in WISP application.
5GHz 802.11n 20, 40 MHz 23dBm 2x2 V+H 17dBi 17°x30° none 1*Fast Ethernet Passive 14‐24V 100‐240V AC, 50/60Hz
5.5w 0.6kg 28x12.3x6cm 30‐70mm IP66 > 200 km/h ‐20°C to 70°C Plasc Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #04
V1.01
Datasheet
N3‐CPE‐55n‐17‐HS Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 5GHz 802.11n on directional antenna and 2.4GHz omni antenna.
Designed to provide 2.4GHz coverage for HotSpot, with 5GHz backhaul from an AP.
2.4 & 5GHz 802.11n 20, 40 MHz 23dBm 2x2 V+H 7dBi, 17dBi 2.4GHz:360°, 5GHz:17°x30° none 1*Fast Ethernet Passive 14‐24V 100‐240V AC, 50/60Hz
8w 0.6kg 28x12.3x6cm 30‐70mm IP66 > 200 km/h ‐20°C to 70°C Plasc Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #04 and #06
V1.01
Datasheet
N3‐CPE‐55‐17‐HS Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Outdoor radio with internal 5GHz 802.11n/ac on direconal antenna and 2.4GHz omni antenna.
Designed to provide 2.4GHz coverage for HotSpot, with 5GHz backhaul from an AP.
2.4 & 5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 V+H 7dBi, 17dBi 2.4GHz:360°, 5GHz:17°x30° none 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
12.2w 0.6kg 28x12.3x6cm 30‐70mm IP66 > 200 km/h ‐20°C to 70°C Plasc Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #04 and #06
V1.01
Datasheet
N3‐iAP‐SINGLE1 Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Powerful indoor AP ‐ 2.4GHz
Designed for indoor enterprise and public access applicaons. This unit gives excellent coverage with it's pyramid shaped 360 degrees antenna.
2.4GHz 802.11n 20, 40 MHz 23dBm 2x2 V+H 4dBi 360° none 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
7.2w 0.6kg 16x16x8cm Wall/ceiling mount IP30 N/A ‐20°C to 70°C Plasc Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration Wireless Equipment Controller (WEC) compatible.
Appendix references RF interface #05
V1.01
Datasheet
N3‐iAP‐DUAL1 Technical specifications: Frequency band WiFi protocol Channel bandwidth Output power pr chain MIMO Polarizations Antenna gain Beam width External N‐conn Ethernet port PoE compatibility PoE injector input (other options available) Max power consumption Weight incl. mount. kit Size HxWxD Mount Mast Diameter Water/dust tightness Wind velocity Operation Temperature Enclosure material Operation mode
Powerful dual‐band indoor AP ‐ 2.4GHz and 5GHz .11ac simultaneously.
Designed for indoor enterprise and public access applications. This unit gives excellent coverage with its pyramid shaped 360 degrees antenna.
2.4 & 5GHz 802.11n/ac 20, 40, 80 MHz 23dBm 2x2 V+H 4dBi, 5dBi 360° none 1*Gigabit 48V passive & 802.3af/at 100‐240V AC, 50/60Hz
13.2w 0.6kg 16x16x8cm Wall/ceiling mount IP30 N/A ‐20°C to 70°C Plasc Bridge, Router VLAN 802.1q, QoS, VLAN tag, 802.1ad, DHCP Networking server&client, stac IP, Broadcast, Multicast routing. WPA 1&2, AES 256bit, TKIP, Security IEEE802.1x Management by SNMP, SSH, WEB. Config backup and restore. Configuration WirelessEquipment Controller (WEC) compatible.
Appendix references RF interface #01 and #05
V1.01
Datasheet RF specifications
RF interface #1
MCS index
Theor. Th.put pr TX Power pr TX power 2 chains chain (Mbps) chain ±2dB (dBm) ±2dB (dBm)
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8
7,2 14,4 21,7 28,9 43,3 57,8 65 72,2 86,7
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9
15 30 45 60 90 120 135 150 180 200
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9
32,5 65 97,5 130 195 260 292,5 325 390 433,3
5GHz 11n/11ac HT20 23 23 23 23 23 23 21 19 18 5GHz 11n/11ac HT40 23 23 23 23 23 22 21 19 17 15 5GHz 11ac HT80 23 23 23 23 23 22 21 19 17 15
RX Sens. ±2dB (dBm)
26 26 26 26 26 26 24 22 20
‐94 ‐94 ‐92 ‐88 ‐84 ‐81 ‐78 ‐77 ‐74
26 26 26 26 26 25 24 22 20 18
‐93 ‐91 ‐90 ‐85 ‐82 ‐78 ‐77 ‐75 ‐73 ‐71
26 26 26 26 26 25 24 22 20 18
‐89 ‐88 ‐85 ‐81 ‐79 ‐75 ‐74 ‐72 ‐70 ‐68
V1.0 .
Datasheet RF specifications
RF interface #02
MCS index
Theor. Th.put pr TX Power pr TX power 3 chains chain (Mbps) chain ±2dB (dBm) ±2dB (dBm)
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8
7,2 14,4 21,7 28,9 43,3 57,8 65 72,2 86,7
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9
15 30 45 60 90 120 135 150 180 200
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9
32,5 65 97,5 130 195 260 292,5 325 390 433,3
5GHz 11n/11ac HT20 18 18 18 17 17 14 13 13 12 5GHz 11n/11ac HT40 18 18 18 16 16 13 12 12 11 11 5GHz 11ac HT80 18 18 18 15 15 12 11 11 10 10
RX Sens. ±2dB (dBm)
23 23 23 22 22 19 18 18 17
‐93 ‐91 ‐90 ‐85 ‐82 ‐78 ‐77 ‐73 ‐71
23 23 23 21 21 18 17 17 16 16
‐93 ‐91 ‐90 ‐85 ‐82 ‐78 ‐77 ‐75 ‐73 ‐71
23 23 23 20 20 17 16 16 15 15
‐89 ‐88 ‐85 ‐81 ‐79 ‐75 ‐74 ‐72 ‐70 ‐68
V1.0
Datasheet RF specifications
RF interface #03
MCS index
Theor. Th.put pr TX Power pr TX power 3 chains chain (Mbps) chain ±2dB (dBm) ±2dB (dBm)
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8
7,2 14,4 21,7 28,9 43,3 57,8 65 72,2 86,7
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9
15 30 45 60 90 120 135 150 180 200
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9
32,5 65 97,5 130 195 260 292,5 325 390 433,3
5GHz 11n/11ac HT20 23 23 23 23 23 23 21 19 17 5GHz 11n/11ac HT40 23 23 23 23 23 22 21 19 17 15 5GHz 11ac HT80 23 23 23 23 23 22 21 19 17 15
RX Sens. ±2dB (dBm)
28 28 28 28 28 28 26 24 22
‐94 ‐94 ‐92 ‐88 ‐84 ‐81 ‐78 ‐77 ‐74
28 28 28 28 28 27 26 24 22 20
‐93 ‐91 ‐90 ‐85 ‐82 ‐78 ‐77 ‐75 ‐73 ‐71
28 28 28 28 28 27 26 24 22 20
‐89 ‐88 ‐85 ‐81 ‐79 ‐75 ‐74 ‐72 ‐70 ‐68
V1.0 .
Datasheet RF specifications
RF interface #04
MCS index
Theor. th.put pr TX Power pr TX power 2 chains chain (Mbps) chain ±2dB (dBm) ±2dB (dBm)
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7
7,2 14,4 21,7 28,9 43,3 57,8 65 72,2
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7
15 30 45 60 90 120 135 150
5GHz 11n HT20 25 24 23 22 21 20 19 19 5GHz 11n HT40 25 24 23 22 21 20 19 19
RX Sens. ±2dB (dBm)
28 27 26 25 24 23 22 22
‐94 ‐92 ‐89 ‐86 ‐83 ‐81 ‐79 ‐77
28 27 26 25 24 23 22 22
‐93 ‐91 ‐89 ‐86 ‐83 ‐80 ‐77 ‐75
V1.0 .
Datasheet RF specifications
RF interface #05
MCS index
Theor. Th.put pr TX Power pr TX power 2 chains chain (Mbps) chain ±2dB (dBm) ±2dB (dBm)
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7
7,2 14,4 21,7 28,9 43,3 57,8 65 72,2
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7
15 30 45 60 90 120 135 150
2.4GHz 11n HT20 23 23 22 22 22 21 20 20 2.4GHz 11n HT40 23 23 22 22 22 21 20 20
RX Sens. ±2dB (dBm)
26 26 25 25 25 24 23 23
‐90 ‐87 ‐85 ‐82 ‐79 ‐76 ‐73 ‐72
26 26 25 25 25 24 23 23
‐88 ‐85 ‐83 ‐80 ‐77 ‐74 ‐71 ‐70
V1.0 .
Datasheet RF specifications
RF interface #06
MCS index
Theor. Th.put pr TX Power pr TX power 2 chains chain (Mbps) chain ±2dB (dBm) ±2dB (dBm)
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7
7,2 14,4 21,7 28,9 43,3 57,8 65 72,2
MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7
15 30 45 60 90 120 135 150
2.4GHz 11n HT20 23 23 23 22 21 20 19 18 2.4GHz 11n HT40 23 23 23 22 21 20 19 18
RX Sens. ±2dB (dBm)
26 26 26 25 24 23 22 21
‐96 ‐94 ‐91 ‐87 ‐85 ‐82 ‐81 ‐79
26 26 26 25 24 23 22 21
‐92 ‐90 ‐87 ‐86 ‐84 ‐82 ‐81 ‐77
V1.0 .
Antenna specifications
Antenna #1 18dBi
Freq. Range
5150‐5850MHz
Gain
18dBi
V.S.W.R
<1.5 Type; Max 2.0
Horizontal Beamwidth
22º
Vertical Beamwidth
22º
Nominal Impedance
50 ohm
Polarization
Vertical and Horizontal
Max Input Power
50 W
Radome Material
UV Protection ABS
Vertical
Horizontal
V1.0 .
Antenna specifications
Antenna #2 23dBi Freq. Range
5150‐5850MHz
Gain
23dBi
V.S.W.R
≤1.5
Horizontal Beamwidth
11º
Vertical Beamwidth
11º
Nominal Impedance
50 ohm
Polarization
Vertical and Horizontal
Max Input Power
100 W
Radome Material
UV Protection ABS
Vertical
Horizontal
V1.0 .
Antenna specifications
Antenna #03 90 degrees Freq. Range
4900‐5850MHz
Gain
16dBi
V.S.W.R
<1.5 Type; Max 2.0
Horizontal Beamwidth
90º
Vertical Beamwidth
7º
Nominal Impedance
50 ohm
Polarization
Vertical and Horizontal
Max Input Power
50 W
Radome Material
UV Protection ABS
V‐pol
H‐pol
V1.0 .
Antenna specifications
Antenna #04 90 degrees 3x3
Freq. Range
4900‐5850MHz
Gain
16dBi
V.S.W.R
<1.5 Type; Max 2.0
Horizontal Beamwidth
90º
Vertical Beamwidth
7º
Nominal Impedance
50 ohm
Polarization
2*Vertical and 1*Horizontal
Max Input Power
50 W
Radome Material
UV Protection ABS
V‐pol
H‐pol
V1.0 .
Antenna specifications
Antenna #05 17dBi Freq. Range
4900‐5850MHz
Gain
16dBi
V.S.W.R
<1.5 Type; Max 2.0
Horizontal Beamwidth
90º
Vertical Beamwidth
7º
Nominal Impedance
50 ohm
Polarization
2*Vertical and 1*Horizontal
Max Input Power
50 W
Radome Material
UV Protection ABS
0
0
-90
90
-90
90
-20 dB
-20 dB
-10 dB
-10 dB
0 dB
0 dB
180
180
Vertical
Horizontal
V1.0 .
