No Metálicos

Transcript

Non-Metallic Polyester 3 763.422.2211 763.422.2600 Intro Page CHAPTER 3 Non-Metallic POLYPRO ULTRX QLINE D POLYPRO polyester enclosures perform exceptionally well in applications where harsh chemicals, weather extremes and corrosive environments demand toughness from a lightweight enclosure. Providing excellent ultraviolet protection and a tight environmental seal, these versatile, feature-rich enclosures are also recyclable. Providing outstanding protection against corrosion and the elements, the clean lines and molded, embossed design of ULTRX fiberglass enclosures make them the most stylish and aesthetically pleasing of their class. QLINE D polycarbonate and ABS enclosures have contoured bodies with flush cover screws for an attractive, contemporary appearance. Tough as well as stylish, they are functional in corrosive environments and can withstand occasional submersion. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-UL rated alternative. 230 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Chapter Contents Hinge-Cover with 3-Point Latch or Quick-Release Latches Polyester Wall-Mount Disconnect POLYPRO, Type 4X POLYPRO Polyester Enclosures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 POLYPRO WiFi, Type 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 Adjustable Panel Block Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 Polyester Mounting Bracket Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 Aluminum Swing-Out Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 Stainless Steel Latches (Padlockable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Hinge Retainers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Fiberglass Continuous Hinge, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 Swing-Out Panel Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 Quick-Release Latch Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 Hinge-Cover WiFi, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Swing-Out Panel Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Threaded Panel Extenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Quick-Release Latch Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 Panels for WiFi Cabinets and Small Wall-Mount Enclosures. . . . . . . . . . . . . . . . . . . . . . . . . . 245 Screw- or Hinge-Cover with Quick-Release Latch Screw- or Hinge-Cover with Quick-Release Latch, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . 246 Fiberglass Mounting Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 Overlapping Cover Raised Cover with Screws, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 Raised Cover with Latches, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 Flat Cover with Screws, Type 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 Flat Cover with Latches, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 Flat Clear Cover with Latches, Type 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258 ULTRX, Type 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 ULTRX WiFi, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262 Panel Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Swing-Out Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Grounding Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Panels for Type 3R, 4, 4X, 12 and 13 Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 Rack Angles (Type RA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 Door Stop Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 Keylock Kit and Padlock Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 Swing Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 ULTRX Key Insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 ULTRX Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Screw Insert Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Self-Tapping Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 EQUIPMENT PROTECTION Fiberglass Disconnect, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 Disconnect Mounting Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 Hazardous Location ZONEX Non-Metallic Terminal Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 Free-Stand Free-Stand, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Accessory Selection for Free-Stand, Type 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 Rack Mounting Accessory Selection for Free-Stand, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . 283 Two-Door Free-Stand Continuous Hinge ULTRX Hinge-Cover with 3-Point Latch or Quick-Release Latches, Type 4X. . . . . . . . . . . . . . . . . . . . 268 Two-Door Free-Stand, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284 Bottom Support Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Polycarbonate and ABS QLINE D QLINE D Pushbutton, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 QLINE D, Type 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 Hinge Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Mounting Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Hardware Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292 QLINE D, EMC, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294 QLINE E QLINE E, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296 Brass Inserts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Hinge Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Mounting Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Hardware Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 QLINE E, EMC, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 QLINE I QLINE I, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304 Cover Screw Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Brass Insert Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Panel Depth Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Swing Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Hinge Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 Mounting Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 Hardware Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 Extension Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 QLINE I, EMC, Type 4X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 231 3 3 Polyester POLYPRO, Type 4X POLYPRO Polyester Enclosures POLYPRO, Type 4X INDUSTRY STANDARDS • Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 12, 13 CSA File No. 42186; Type 4, 4X, 12, 13 (solid covers only) IEC 60529, IP66 APPLICATION POLYPRO polyester enclosures perform exceptionally well in applications where harsh chemicals, weather extremes and corrosive environments demand toughness from a lightweight enclosure. Providing excellent ultraviolet protection and a tight environmental seal, these versatile, feature-rich enclosures are also recyclable. SPECIFICATIONS • • • • • • • Non-glass-filled polyester material offers superior UV resistance; eliminates fiberbloom associated with fiberglass Provides excellent chemical resistance to a broad range of solvents, alkalis and acids Resists cracking and provides excellent impact resistance L ighter-weight than fiberglass Recyclable Easy, dustless in-field modifications using standard tools Overlapping tongue-and-groove raised cover and gasket provide a secure Type 4X seal 232 Non-Metallic • • • • • • Removable snap-hinge cover allows for easy access to cover and body for modifications Molded layout grid on inside of body and solid covers assists with component mounting Molded-in embosses for rear panel mounting Optional cover screws included with all models Internal rail system and adjustable panel blocks allow for panel height adjustment and installation of multiple panels S cratch-resistant polycarbonate windows Standard models include body and cover, two mounting feet, two latch assemblies with optional cover screws and hardware (adjustable panel blocks and panels sold separately) FINISH Standard finish is RAL 7035 light-gray textured inside and out ACCESSORIES See also Accessories. Adjustable Panel Block Kit Panels for Junction Boxes HOL-SEALERS Non-Metallic Hole Seals Aluminum Swing-Out Panels Stainless Steel Latches (Padlockable) Hinge Retainers MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: PCR SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Catalog Number A644PHC A644PHCW A664PHC A664PHCW A864PHC A864PHCW A884PHC A884PHCW A1084PHC A1084PHCW A10106PHC A10106PHCW A12106PHC A12106PHCW A14128PHC A14128PHCW A16148PHC A16148PHCW A181610PHC A181610PHCW AxBxC in./mm 6.12 x 4.12 x 4.38 155 x 105 x 111 6.12 x 4.12 x 4.38 155 x 105 x 111 6.12 x 6.12 x 4.38 155 x 155 x 111 6.12 x 6.12 x 4.38 155 x 155 x 111 8.12 x 6.12 x 4.38 206 x 155 x 111 8.12 x 6.12 x 4.38 206 x 155 x 111 8.12 x 8.12 x 4.38 206 x 206 x 111 8.12 x 8.12 x 4.38 206 x 206 x 111 10.12 x 8.12 x 4.38 257 x 155 x 111 10.12 x 8.12 x 4.38 257 x 155 x 111 10.04 x 10.04 x 6.38 255 x 255 x 162 10.04 x 10.04 x 6.38 255 x 255 x 162 12.08 x 10.09 x 6.38 307 x 256 x 162 12.08 x 10.09 x 6.38 307 x 256 x 162 14.02 x 12.01 x 8.35 356 x 305 x 212 14.02 x 12.01 x 8.35 356 x 305 x 212 16.02 x 14.01 x 8.35 407 x 356 x 212 16.02 x 14.01 x 8.35 407 x 356 x 212 17.95 x 15.94 x 10.35 456 x 405 x 263 17.95 x 15.94 x 10.35 456 x 405 x 263 Cover Type Solid Steel Panel A6P4 Aluminum Panel A6P4AL Window A6P4 A6P4AL Solid A6P6 A6P6AL Window A6P6 A6P6AL Solid A8P6 A8P6AL Window A8P6 A8P6AL Solid A8P8 A8P8AL Window A8P8 A8P8AL Solid A10P8 A10P8AL Window A10P8 A10P8AL Solid A10P10 A10P10AL Window A10P10 A10P10AL Solid A12P10 A12P10AL Window A12P10 A12P10AL Solid A14P12 A14P12AL Window A14P12 A14P12AL Solid A16P14 A16P14AL Window A16P14 A16P14AL Solid A18P16 A18P16AL Window A18P16 A18P16AL Panel Size DxE in./mm 4.88 x 2.88 124 x 73 4.88 x 2.88 124 x 73 4.88 x 4.88 124 x 124 4.88 x 4.88 124 x 124 6.75 x 4.88 171 x 124 6.75 x 4.88 171 x 124 6.75 x 6.88 171 x 175 6.75 x 6.88 171 x 175 8.75 x 6.88 222 x 175 8.75 x 6.88 222 x 175 8.75 x 8.88 222 x 226 8.75 x 8.88 222 x 226 10.75 x 8.88 273 x 226 10.75 x 8.88 273 x 226 12.75 x 10.88 324 x 276 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 16.75 x 14.88 425 x 378 F in./mm 4.32 110 4.32 110 4.32 110 4.32 110 4.32 110 4.32 110 4.32 110 4.32 110 4.32 110 4.32 110 6.32 161 6.32 161 6.32 161 6.32 161 8.27 210 8.27 210 8.27 210 8.27 210 10.27 261 10.27 261 G in./mm 7.38 187 7.38 187 7.38 187 7.38 187 9.38 238 9.38 238 9.38 238 9.38 238 11.38 289 11.38 289 11.31 287 11.31 287 13.34 339 13.34 339 15.27 388 15.27 388 17.27 439 17.27 439 19.20 488 19.20 488 H in./mm 2.56 65 2.56 65 4.56 116 4.56 116 4.56 116 4.56 116 6.56 167 6.56 167 6.56 167 6.56 167 8.56 217 8.56 217 8.56 217 8.56 217 10.56 268 10.56 268 12.56 319 12.56 319 14.56 370 14.56 370 J in./mm 3.91 99 3.91 99 3.91 99 3.91 99 3.91 99 3.91 99 3.91 99 3.91 99 3.91 99 3.91 99 5.91 150 5.91 150 5.91 150 5.91 150 7.91 201 7.91 201 7.91 201 7.91 201 9.91 252 9.91 252 L in./mm 8.15 207 8.15 207 8.15 207 8.15 207 10.15 258 10.15 258 10.15 258 10.15 258 12.15 309 12.15 309 12.08 307 12.08 307 14.08 358 14.08 358 16.04 407 16.04 407 18.04 458 18.04 458 19.97 507 19.97 507 M in./mm — — 4.25 108 — — 4.25 108 — — 6.25 159 — — 6.25 159 — — 8.25 210 — — 8.25 210 — — 10.25 260 — — 12.25 311 — — 14.25 362 — — 16.25 413 N in./mm — — 2.25 57 — — 4.25 108 — — 4.25 108 — — 6.25 159 — — 6.25 159 — — 8.25 210 — — 8.25 210 — — 10.25 260 — — 12.25 311 — — 14.25 362 W in./mm 5.23 133 5.23 133 7.23 184 7.23 184 7.23 184 7.23 184 9.23 234 9.23 234 9.23 234 9.23 234 11.23 285 11.23 285 11.23 285 11.23 285 13.32 338 13.32 338 15.32 389 15.32 389 17.32 440 17.32 440 3 Purchase panels separately. Panels are available in aluminum, mild steel, stainless steel, conductive and composite materials. EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 233 Polyester POLYPRO, Type 4X 3 Polyester POLYPRO, Type 4X POLYPRO WiFi, Type 4X INDUSTRY STANDARDS FEATURES UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A • • NEMA/EEMAC Type 4, 4X, 12, 13 CSA File No. 42186; Type 4, 4X, 12, 13 (solid covers only) IEC 60529, IP66 • • • • • APPLICATION • POLYPRO WiFi enclosures provide protection for wireless equipment in both indoor and outdoor locations. The polyester construction and wood panel allow WiFi and WLAN signals to pass through the enclosure unimpeded. They perform exceptionally well in applications where harsh chemicals, weather extremes, a corrosive environment or flames demand toughness from a lightweight enclosure. Providing excellent ultraviolet protection and a tight environmental seal, these versatile, feature-rich enclosures are also recyclable. • • • Non-glass-filled polyester material offers superior UV resistance; eliminates fiberbloom associated with fiberglass Provides excellent chemical resistance to a broad range of solvents, alkalis and acids Resists cracking and provides excellent impact resistance L ighter-weight than fiberglass Recyclable Easy, dustless in-field modifications using standard tools Overlapping tongue-and-groove raised cover and gasket provide secure Type 4X seal Removable snap-hinge cover allows for easy access to cover and body for modifications Molded layout grid on inside of body and solid covers assists with component mounting Molded-in embosses for rear panel mounting Internal rail system and adjustable panel blocks allow for panel height adjustment and installation of multiple panels SPECIFICATIONS • •  cratch-resistant polycarbonate windows S Standard models include body and cover, two mounting feet, two latch assemblies with optional cover screws and hardware, and 3/4-in. plywood panel FINISH Polyester material is RAL 7035 light-gray textured finish inside and out Bulletin: DWS12 234 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Catalog Number D664WF D664WFW D16148WF D16148WFW AxBxC in./mm 6.12 x 6.12 x 4.38 155 x 155 x 111 6.12 x 6.12 x 4.38 155 x 155 x 111 16.12 x 14.01 x 8.35 409 x 356 x 212 16.12 x 14.01 x 8.35 409 x 356 x 212 Door Type Solid Window Solid Window Panel Size DxE in./mm 4.88 x 4.88 124 x 124 4.88 x 4.88 124 x 124 14.75 x 12.88 375 x 327 14.75 x 12.88 375 x 327 F in./mm 4.32 110 4.32 110 8.27 210 8.27 210 G in./mm 7.38 187 7.38 187 17.27 439 17.27 439 H in./mm 2.56 65 2.56 65 12.56 319 12.56 319 J in./mm 3.91 99 3.91 99 7.91 201 7.91 201 L in./mm 8.15 207 8.15 207 18.04 458 18.04 458 M in./mm — — 4.25 108 — — 14.25 362 N in./mm — — 2.25 57 — — 12.25 311 W in./mm 5.23 133 5.23 133 15.32 389 15.32 389 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 235 Polyester POLYPRO, Type 4X 3 Polyester POLYPRO, Type 4X Adjustable Panel Block Kit Panel blocks slide inside POLYPRO internal rail system for panel height adjustment within top 5 in. of enclosure. Allows for installation of multiple panels. Bulletin: PCRY Catalog Number APNLBLK Qty. 4 Includes Allen wrench $GMXVWDEOH SDQHOEORFN ;  Polyester Mounting Bracket Kits Replacement POLYPRO mounting brackets are sold in sets of two and include hardware for mounting to enclosure. Included with standard POLYPRO models.  PP Bulletin: PCRY Catalog Number APOLYFT4 APOLYFT6 APOLYFT8 APOLYFT10 APOLYFT12 APOLYFT14 APOLYFT16 Description (in.) 4.00 6.00 8.00 10.00 12.00 14.00 16.00 &/ Qty. 2 2 2 2 2 2 2  PP  Aluminum Swing-Out Panels Includes four POLYPRO Adjustable Panel Blocks. No enclosure modification is required for installation. Bulletin: PCRY ' Catalog Number A64PSWPNL A66PSWPNL A86PSWPNL A88PSWPNL A108PSWPNL A1010PSWPNL A1210PSWPNL A1412PSWPNL A1614PSWPNL A1816PSWPNL D x E (in.) 5.00 x 3.62 5.00 x 5.62 7.00 x 5.62 7.00 x 7.62 9.00 x 7.62 9.00 x 9.62 11.00 x 9.62 13.00 x 11.62 15.00 x 13.62 17.00 x 15.62 D x E (mm) 127 x 92 127 x 143 178 x 143 178 x 194 229 x 194 229 x 244 279 x 244 330 x 295 381 x 346 432 x 397 (  236 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Stainless Steel Latches (Padlockable) Stainless Steel Latches can be retrofitted on all POLYPRO models with no modification or drilling required. Hinge/latch constructed of corrosion-resistant polyester with a Type 316L stainless steel bail. Included with standard POLYPRO models. Bulletin: PCRY Catalog Number AQRLSS6 Hinge Retainers Qty. 2 Hinge Retainers can be field-installed without modification to POLYPRO hinges for applications where easy cover removal is not desired. Two retainers per enclosure is recommended. Kit includes ten hinge retainers. Bulletin: PCRY Catalog Number AHGCLP Description POLYPRO Hinge Retainers Pkg. Qty. 10 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 237 Polyester POLYPRO, Type 4X 3 Fiberglass Continuous Hinge Fiberglass Continuous Hinge Continuous Hinge, Type 4X SPECIFICATIONS • • • • • • • • • • • • FINISH INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 12, 13 CSA File No. 42186: Type 4, 4X, 12, 13 IEC 60529, IP66 APPLICATION The efficient design and simple construction of these enclosures make them durable in corrosive environments, yet aesthetically pleasing. Corner latches provide unobstructed access. The continuous hinge provides a secure seal, and double latching creates added security. 238 Non-Metallic Compression-molded fiberglass has outstanding chemicaland temperature-resistance qualities and exhibits excellent weatherability and physical properties Fiberglass is easily punched, drilled, filed or sawed Gasket assures water-tight and dust-tight seal Polyester mounting brackets and stainless steel attachment screws are provided with each enclosure S cratch-resistant polycarbonate windows are permanently bonded in place Molded-in-place threaded brass inserts and plated steel screws are provided for mounting optional panels and terminal block kits Removable hinged cover attached to body with Type 316 stainless steel hinge pin S crew-cover enclosures are secured with two captivated Type 316 stainless steel slotted cover screws Enclosures with quick-release latches have corrosion-resistant polyester latches located in corners that provide unobstructed access to enclosure Hinge pin and bail are corrosion-resistant Type 316 stainless steel P adlock provisions included in each latch Material is halogen free Standard fiberglass material finish is light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels for Junction Boxes Threaded Panel Extenders Quick-Release Latch Kit Swing-Out Panel Kit MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A48 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Solid Cover Catalog Number A664CHSCFG A664CHQRFG A864CHSCFG A864CHQRFG A1086CHSCFG A1086CHQRFG A12106CHSCFG A12106CHQRFG A14128CHSCFG A14128CHQRFG A16148CHSCFG A16148CHQRFG A181610CHSCFG A181610CHQRFG AxBxC in./mm 6.00 x 6.00 x 4.00 152 x 152 x 102 6.00 x 6.00 x 4.00 152 x 152 x 102 8.00 x 6.00 x 4.00 203 x 152 x 102 8.00 x 6.00 x 4.00 203 x 152 x 102 10.00 x 8.00 x 6.00 254 x 203 x 152 10.00 x 8.00 x 6.00 254 x 203 x 152 12.00 x 10.00 x 6.00 305 x 254 x 152 12.00 x 10.00 x 6.00 305 x 254 x 152 14.00 x 12.00 x 8.00 356 x 305 x 203 14.00 x 12.00 x 8.00 356 x 305 x 203 16.00 x 14.00 x 8.00 406 x 356 x 203 16.00 x 14.00 x 8.00 406 x 356 x 203 18.00 x 16.00 x 10.00 457 x 406 x 254 18.00 x 16.00 x 10.00 457 x 406 x 254 Type Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Steel Panel A6P6 Alum. Panel A6P6AL A6P6 A6P6AL A8P6 A8P6AL A8P6 A8P6AL A10P8 A10P8AL A10P8 A10P8AL A12P10 A12P10AL A12P10 A12P10AL A14P12 A14P12AL A14P12 A14P12AL A16P14 A16P14AL A16P14 A16P14AL A18P16 A18P16AL A18P16 A18P16AL Panel Size DxE in./mm 4.88 x 4.88 124 x 124 4.88 x 4.88 124 x 124 6.75 x 4.88 171 x 124 6.75 x 4.88 171 x 124 8.75 x 6.88 222 x 175 8.75 x 6.88 222 x 175 10.75 x 8.88 273 x 226 10.75 x 8.88 273 x 226 12.75 x 10.88 324 x 276 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 16.75 x 14.88 425 x 378 Mounting GxH in./mm 6.94 x 4.00 176 x 102 6.94 x 4.00 176 x 102 8.94 x 4.00 227 x 102 8.94 x 4.00 227 x 102 10.94 x 6.00 278 x 152 10.94 x 6.00 278 x 152 12.94 x 8.00 329 x 203 12.94 x 8.00 329 x 203 14.94 x 10.00 379 x 254 14.94 x 10.00 379 x 254 16.94 x 12.00 430 x 305 16.94 x 12.00 430 x 305 18.94 x 14.00 481 x 356 18.94 x 14.00 481 x 356 Overall LxW in./mm 6.50 x 6.50 165 x 165 6.50 x 6.50 165 x 165 8.50 x 6.50 216 x 165 8.50 x 6.50 216 x 165 10.50 x 8.50 267 x 216 10.50 x 8.50 267 x 216 12.50 x 10.50 318 x 267 12.50 x 10.50 318 x 267 14.55 x 12.55 370 x 319 14.55 x 12.55 370 x 319 16.55 x 14.55 420 x 370 16.55 x 14.55 420 x 370 18.58 x 16.58 472 x 421 18.58 x 16.58 472 x 421 F in./mm 3.45 88 3.45 88 3.45 88 3.45 88 5.45 138 5.45 138 5.45 138 5.45 138 7.45 189 7.45 189 7.45 189 7.45 189 9.45 240 9.45 240 J in./mm 3.25 83 3.25 83 3.25 83 3.25 83 4.94 125 4.94 125 4.69 119 4.69 119 6.50 165 6.50 165 6.23 158 6.23 158 7.66 195 7.66 195 K in./mm 1.00 25 1.00 25 1.00 25 1.00 25 1.31 33 1.31 33 1.56 40 1.56 40 1.81 46 1.81 46 2.08 53 2.08 53 2.66 68 2.66 68 O in./mm 4.25 108 4.25 108 4.25 108 4.25 108 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.25 311 14.25 362 14.25 362 P in./mm 4.25 108 4.25 108 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.25 311 14.25 362 14.25 362 16.25 413 16.25 413 Q in./mm 5.64 143 5.64 143 7.64 194 7.64 194 9.61 244 9.61 244 11.58 294 11.58 294 13.59 345 13.59 345 15.56 395 15.56 395 17.53 445 17.53 445 T in./mm 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.15 4 0.15 4 0.15 4 0.15 4 0.16 4 0.16 4 U in./mm 5.64 143 5.64 143 5.64 143 5.64 143 7.61 193 7.61 193 9.58 243 9.58 243 11.59 294 11.59 294 13.56 344 13.56 344 15.53 394 15.53 394 Purchase panels separately. Optional stainless steel, aluminum, conductive and composite material panels available for most sizes. 3 Standard Product  Window Cover AxBxC in./mm 6.00 x 6.00 x 4.00 152 x 152 x 102 A664CHQRFGW 6.00 x 6.00 x 4.00 152 x 152 x 102 A864CHSCFGW 8.00 x 6.00 x 4.00 203 x 152 x 102 A864CHQRFGW 8.00 x 6.00 x 4.00 203 x 152 x 102 A1086CHSCFGW 10.00 x 8.00 x 6.00 254 x 203 x 152 A1086CHQRFGW 10.00 x 8.00 x 6.00 254 x 203 x 152 A12106CHSCFGW 12.00 x 10.00 x 6.00 305 x 254 x 152 A12106CHQRFGW 12.00 x 10.00 x 6.00 305 x 254 x 152 A14128CHSCFGW 14.00 x 12.00 x 8.00 356 x 305 x 203 A14128CHQRFGW 14.00 x 12.00 x 8.00 356 x 305 x 203 A16148CHSCFGW 16.00 x 14.00 x 8.00 406 x 356 x 203 A16148CHQRFGW 16.00 x 14.00 x 8.00 406 x 356 x 203 A181610CHSCFGW 18.00 x 16.00 x 10.00 457 x 406 x 254 A181610CHQRFGW 18.00 x 16.00 x 10.00 457 x 406 x 254 Catalog Number A664CHSCFGW Type Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Screw Cover Quick Release Steel Panel A6P6 Alum. Panel A6P6AL A6P6 A6P6AL A8P6 A8P6AL A8P6 A8P6AL A10P8 A10P8AL A10P8 A10P8AL A12P10 A12P10AL A12P10 A12P10AL A14P12 A14P12AL A14P12 A14P12AL A16P14 A16P14AL A16P14 A16P14AL A18P16 A18P16AL A18P16 A18P16AL Panel Size DxE in./mm 4.88 x 4.88 124 x 124 4.88 x 4.88 124 x 124 6.75 x 4.88 171 x 124 6.75 x 4.88 171 x 124 8.75 x 6.88 222 x 175 8.75 x 6.88 222 x 175 10.75 x 8.88 273 x 226 10.75 x 8.88 273 x 226 12.75 x 10.88 324 x 276 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 16.75 x 14.88 425 x 378 Mounting GxH in./mm 6.94 x 4.00 176 x 102 6.94 x 4.00 176 x 102 8.94 x 4.00 227 x 102 8.94 x 4.00 227 x 102 10.94 x 6.00 278 x 152 10.94 x 6.00 278 x 152 12.94 x 8.00 329 x 203 12.94 x 8.00 329 x 203 14.94 x 10.00 379 x 254 14.94 x 10.00 379 x 254 16.94 x 12.00 430 x 305 16.94 x 12.00 430 x 305 18.94 x 14.00 481 x 356 18.94 x 14.00 481 x 356 Overall LxW in./mm 6.50 x 6.50 165 x 165 6.50 x 6.50 165 x 165 8.50 x 6.50 216 x 165 8.50 x 6.50 216 x 165 10.50 x 8.50 267 x 216 10.50 x 8.50 267 x 216 12.50 x 10.50 318 x 267 12.50 x 10.50 318 x 267 14.55 x 12.55 370 x 319 14.55 x 12.55 370 x 319 16.55 x 14.55 420 x 370 16.55 x 14.55 420 x 370 18.58 x 16.58 472 x 421 18.58 x 16.58 472 x 421 F in./mm 3.45 88 3.45 88 3.45 88 3.45 88 5.45 138 5.45 138 5.45 138 5.45 138 7.45 189 7.45 189 7.45 189 7.45 189 9.45 240 9.45 240 J in./mm 3.25 83 3.25 83 3.25 83 3.25 83 4.94 125 4.94 125 4.69 119 4.69 119 6.50 165 6.50 165 6.23 158 6.23 158 7.66 195 7.66 195 K in./mm 1.00 25 1.00 25 1.00 25 1.00 25 1.31 33 1.31 33 1.56 40 1.56 40 1.81 46 1.81 46 2.08 53 2.08 53 2.66 68 2.66 68 M in./mm 4.25 108 4.25 108 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.25 311 14.25 362 14.25 362 16.25 413 16.25 413 N in./mm 4.25 108 4.25 108 4.25 108 4.25 108 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.25 311 14.25 362 14.25 362 O in./mm 4.25 108 4.25 108 4.25 108 4.25 108 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.25 311 14.25 362 14.25 362 P in./mm 4.25 108 4.25 108 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.25 311 14.25 362 14.25 362 16.25 413 16.25 413 Q in./mm 5.64 143 5.64 143 7.64 194 7.64 194 9.61 244 9.61 244 11.58 294 11.58 294 13.59 345 13.59 345 15.56 395 15.56 395 17.53 445 17.53 445 T in./mm 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.15 4 0.15 4 0.15 4 0.15 4 0.16 4 0.16 4 U in./mm 5.64 143 5.64 143 5.64 143 5.64 143 7.61 193 7.61 193 9.58 243 9.58 243 11.59 294 11.59 294 13.56 344 13.56 344 15.53 394 15.53 394 Purchase panels separately. Optional stainless steel, aluminum, conductive and composite material panels available for most sizes. EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 239 Fiberglass Continuous Hinge 3 Fiberglass Continuous Hinge X-X #1/4-10 X X #1/4-10 240 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Quick-Release Latch Kit Two fiberglass-reinforced gray polyester latches with 316L stainless steel bail and screw-hole plugs are included in each package. Supplied with Continuous Hinge, Type 4X enclosures and available for Fiberglass Hinged Cover WiFi Cabinet, Type 4X. Kit converts screw-cover enclosures to quick-release without modification. No tools needed to install. Padlocking provision is included. Bulletin: A48Y Catalog Number AL48 Swing-Out Panel Kit The Swing-Out Panel Kit provides an attractive, cost-effective solution for installing front-mounted panels in Continuous Hinge, Type 4X, and Overlapping Cover, Type 4X enclosures. No drilling required. Bulletin: A48Y Catalog Number A6SPK6C A8SPK6C A10SPK8C A12SPK10C A16SPK14C A18SPK16C A14SPK12C Description Quick-Release Latch Kit Fits Enclosure A x B (in.) 6.00 x 6.00 8.00 x 6.00 10.00 x 8.00 12.00 x 10.00 16.00 x 14.00 18.00 x 16.00 14.00 x 12.00 Kit Qty. 2 Fits Enclosure A x B (mm) 152 x 152 203 x 152 254 x 203 305 x 254 406 x 356 457 x 406 356 x 305 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 241 Fiberglass Continuous Hinge 3 Fiberglass Continuous Hinge Hinge-Cover WiFi, Type 4X FEATURES • • • • • • • •  iberglass is easily punched, drilled, filed or sawed F Gasket assures watertight and dusttight seal Molded-in-place threaded brass inserts and plated steel screws are provided for mounting optional panels and terminal block kits Removable hinged cover attached to body with Type 316 stainless steel hinge pin S crew cover enclosures are secured with two captivated Type 316 stainless steel slotted cross-point cover screws Available quick-release latches are corrosion-resistant polyester located in corners to provide unobstructed access to enclosure K nockout padlock provisions included in each latch Material is halogen free SPECIFICATIONS • INDUSTRY STANDARDS • UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability rating per UL 508 • • NEMA/EEMAC Type 4, 4X, 12, and 13 Window flammability rating per UL 508 CSA File No. LR42186:Type 4, 4X, 12, and 13 IEC 60529, IP66 Cabinets with solid doors are plenum rated. • Enclosure and door made of molded fiberglass polyester that resists chemicals and temperature change S cratch-resistant GE Lexan Margard® windows are permanently bonded in place Polyester mounting brackets and stainless steel attachment screws are provided with each enclosure Hinge pin and bail are corrosion-resistant Type 316 stainless steel Includes a 3/4-in. plywood panel for mounting equipment Margard is a trademark of General Electric FINISH Fiberglass material is light gray inside and out. APPLICATION The fiberglass WiFi Cabinet is a secure, hinged enclosure that does not impede WiFi or WLAN signals. It is ideal for housing wireless equipment in locations such as tunnels, floor vaults, marinas, outside walls or rooftops. Bulletin: DWS12 Standard Product  Solid Door Catalog Number D664CHSCFGP D16148CHSCFGP D181610CHSCFGP AxBxC in./mm 6.00 x 6.00 x 4.00 152 x 152 x 102 16.00 x 14.00 x 8.00 406 x 356 x 203 18.00 x 16.00 x 10.00 457 x 406 x 254 Panel A6P6WD A16P14WD A18P16WD Panel DXE in./mm 4.88 x 4.88 124 x 124 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 Mounting GxH in./mm 6.94 x 4.00 176 x 102 16.94 x 12.00 430 x 305 18.94 x 14.00 481 x 356 Overall Size LxW in./mm 6.50 x 6.50 165 x 165 16.55 x 14.55 420 x 370 18.58 x 16.58 472 x 421 J in./mm 3.25 83 6.23 158 7.66 195 K in./mm 1.00 25 2.08 53 2.66 68 O in./mm 4.25 108 12.25 311 14.25 362 P in./mm 4.25 108 14.25 362 16.25 413 Q in./mm 5.64 143 15.56 395 17.53 445 R in./mm 5.12 130 15.12 384 17.12 435 T in./mm .12 3 .15 4 .16 4 U in./mm 5.64 143 13.56 344 15.53 394 P in./mm 4.25 108 14.25 362 16.25 413 Q in./mm 5.64 143 15.56 395 17.53 445 R in./mm 5.12 130 15.12 384 17.12 435 T in./mm .12 3 .15 4 .16 4 U in./mm 5.64 143 13.56 344 15.53 394 Wood panels included with enclosure. Optional steel panels must be ordered separately. Standard Product  Window Door Catalog Number D664CHSCFGWP D16148CHSCFGWP D181610CHSCFGWP 242 AxBxC in./mm 6.00 x 6.00 x 4.00 152 x 152 x 102 16.00 x 14.00 x 8.00 406 x 356 x 203 18.00 x 16.00 x 10.00 457 x 406 x 254 Non-Metallic Panel A6P6WD A16P14WD A18P16WD Panel DXE in./mm 4.88 x 4.88 124 x 124 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 Mounting GxH in./mm 6.94 x 4.00 176 x 102 16.94 x 12.00 430 x 305 18.94 x 14.00 481 x 356 Overall Size LxW in./mm 6.50 x 6.50 165 x 165 16.55 x 14.55 420 x 370 18.58 x 16.58 472 x 421 J in./mm 3.25 83 6.23 158 7.66 195 SUBJECT TO CHANGE WITHOUT NOTICE K in./mm 1.00 25 2.08 53 2.66 68 O in./mm 4.25 108 12.25 311 14.25 362 EQUIPMENT PROTECTION X #1/4-10 X #1/4-10 3 X-X EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 243 Fiberglass Continuous Hinge 3 Fiberglass Continuous Hinge Quick-Release Latch Kit Two fiberglass-reinforced gray polyester latches with 316L stainless steel bail and screw-hole plugs are included in each package. Supplied with Continuous Hinge, Type 4X enclosures and available for Fiberglass Hinged Cover WiFi Cabinet, Type 4X. Kit converts screw-cover enclosures to quick-release without modification. No tools needed to install. Padlocking provision is included. Bulletin: A48Y Catalog Number AL48 Swing-Out Panel Kit The Swing-Out Panel Kit provides an attractive, cost-effective solution for installing front-mounted panels in Continuous Hinge, Type 4X, and Overlapping Cover, Type 4X enclosures. No drilling required. Bulletin: A48Y Description Quick-Release Latch Kit Kit Qty. 2 Catalog Number A6SPK6C A8SPK6C A10SPK8C A12SPK10C A16SPK14C A18SPK16C A14SPK12C Fits Enclosure A x B (in.) 6.00 x 6.00 8.00 x 6.00 10.00 x 8.00 12.00 x 10.00 16.00 x 14.00 18.00 x 16.00 14.00 x 12.00 Fits Enclosure A x B (mm) 152 x 152 203 x 152 254 x 203 305 x 254 406 x 356 457 x 406 356 x 305 Catalog Number APE050 APE100 Length (in.) 0.50 1.00 Length (mm) 13 25 Threaded Panel Extenders Threaded Panel Extenders are made of plated steel and designed to raise the panel mounting surface. Extenders attach to threaded internal pads. Male and female thread size is 10-32. Each kit contains 4 extenders. Bulletin: A80 244 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Panels for WiFi Cabinets and Small WallMount Enclosures Panels are available in both steel and wood. Steel panels are 14 gauge steel with a white polyester powder paint finish. Wood panels are 3/4-in. plywood and are unfinished. Wood panels are supplied with Fiberglass Hinged-Cover and POLYPRO Type 4X WiFi Cabinets. Bulletin: DWS12, PNLJ, PNLWM Catalog Number A6P6 A6P6WD A16P14 A16P14WD A18P16 A18P16WD Material Steel Wood Steel Wood Steel Wood Panel Size D x E (in.) 4.88 x 4.88 4.88 x 4.88 14.75 x 12.88 14.75 x 12.88 16.75 x 14.88 16.75 x 14.88 Panel Size D x E (mm) 124 x 124 124 x 124 375 x 327 375 x 327 425 x 378 425 x 378 V (in.) 0.31 0.31 0.25 0.25 0.25 0.25 V (mm) 8 8 6 6 6 6 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 245 Fiberglass Continuous Hinge 3 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch Screw- or Hinge-Cover with Quick-Release Latch, Type 4X Screw- or Hinge-Cover with Quick-Release Latch INDUSTRY STANDARDS • Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A • • • NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 CSA File No. 42186: Type 3R, 4, 4X, 12 IEC 60529, IP66 Meets NEMA Type 3RX requirements  crew-cover enclosures have easily removable covers attached S to body with internal plated steel hinges. Cover securely fastens to the body with four captivated Type 316 stainless steel cover screws. Enclosures with quick-release latches have corrosion-resistant polyester hinges and polyester latches with a Type 316L stainless steel bail. Attached with Type 316 stainless steel screws. A Type 316L stainless steel padlock hasp is furnished with each enclosure. S ealing washers are furnished with enclosure Material is halogen free FINISH APPLICATION Standard fiberglass material finish is light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum and composite panels are unpainted. SPECIFICATIONS See also Accessories. H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels for Junction Boxes Able to withstand harsh environments, these small enclosures feature a simple, traditional non-metallic design that is suitable for a broad range of applications. • • • • • Compression-molded fiberglass material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties Fiberglass material is easily punched, drilled, filed or sawed S eamless foam-in-place gasket assures water-tight and dusttight seal Threaded internal bosses provided for mounting optional panels and terminal block kits Polycarbonate windows are permanently bonded in place 246 Non-Metallic ACCESSORIES MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A50 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Solid Cover with Screws Catalog Number A645JFGR A845JFGR A865JFGR A1066JFGR A1287JFGR A14107JFGR A16128JFGR A18149JFGR Inside Dimensions AxBxC in./mm 5.50 x 4.00 x 4.94 140 x 102 x 125 7.50 x 4.00 x 4.94 191 x 102 x 125 7.50 x 6.00 x 5.19 191 x 152 x 132 9.50 x 6.00 x 5.69 241 x 152 x 145 11.50 x 8.00 x 6.69 292 x 203 x 170 13.50 x 10.00 x 7.19 343 x 254 x 183 15.50 x 12.00 x 8.19 394 x 305 x 208 17.50 x 14.00 x 8.69 445 x 356 x 221 AxBxC in./mm 6.00 x 4.00 x 5.00 152 x 102 x 127 8.00 x 4.00 x 5.00 203 x 102 x 127 8.00 x 6.00 x 5.00 203 x 152 x 127 10.00 x 6.00 x 6.00 254 x 152 x 152 12.00 x 8.00 x 7.00 305 x 203 x 178 14.00 x 10.00 x 7.00 356 x 254 x 178 16.00 x 12.00 x 8.00 406 x 305 x 203 18.00 x 14.00 x 9.00 457 x 356 x 229 Steel Panel No Panel Aluminum Panel No Panel A6P4 A6P4AL A6P6 A6P6AL A8P6 A8P6AL A10P8 A10P8AL A12P10 A12P10AL A14P12 A14P12AL A16P14 A16P14AL Panel Size DxE in./mm No Panel No Panel 4.88 x 2.88 124 x 73 4.88 x 4.88 124 x 124 6.75 x 4.88 171 x 124 8.75 x 6.88 222 x 175 10.75 x 8.88 273 x 226 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327 Mounting GxH in./mm 4.75 x 2.00 121 x 51 6.75 x 2.00 171 x 51 6.75 x 4.00 171 x 102 8.75 x 4.00 222 x 102 10.75 x 6.00 273 x 152 12.75 x 8.00 324 x 203 14.75 x 10.00 375 x 254 16.75 x 12.00 425 x 305 Overall LxW in./mm 6.00 x 4.50 152 x 114 8.00 x 4.50 203 x 114 8.00 x 6.50 203 x 165 10.00 x 6.50 254 x 165 12.00 x 8.50 305 x 216 14.00 x 10.50 356 x 267 16.00 x 12.50 406 x 318 18.00 x 14.50 457 x 368 F in./mm 4.41 112 4.41 112 4.66 118 5.16 131 6.16 156 6.66 169 7.66 195 8.16 207 J in./mm 4.13 105 4.13 105 4.38 111 4.63 118 5.13 130 5.63 143 6.13 156 6.63 168 K in./mm 1.00 25 1.00 25 1.00 25 1.25 32 1.75 44 1.75 44 2.25 57 2.25 57 V in./mm --0.31 8 0.31 8 0.25 6 0.25 6 0.25 6 0.25 6 0.25 6 X in./mm 4.22 107 6.22 158 6.22 158 8.12 206 9.97 253 11.97 304 13.78 350 15.78 401 Y in./mm 3.59 91 3.59 91 5.59 142 5.50 140 7.34 186 9.34 237 11.16 283 13.16 334 Purchase panels separately. Optional stainless steel, aluminum and composite material panels available for most sizes. Standard Product  Solid Cover with Quick-Release Latches Catalog Number AxBxC in./mm A645JFGQRR 6.00 x 4.00 x 5.00 152 x 102 x 127 A845JFGQRR 8.00 x 4.00 x 5.00 203 x 102 x 127 A865JFGQRR 8.00 x 6.00 x 5.00 203 x 152 x 127 A1066JFGQRR 10.00 x 6.00 x 6.00 254 x 152 x 152 A1287JFGQRR 12.00 x 8.00 x 7.00 305 x 203 x 178 A14107JFGQRR 14.00 x 10.00 x 7.00 356 x 254 x 178 A16128JFGQRR 16.00 x 12.00 x 8.00 406 x 305 x 203 A18149JFGQRR 18.00 x 14.00 x 9.00 457 x 356 x 229 Inside Dimensions AxBxC in./mm 5.50 x 4.00 x 5.02 140 x 102 x 128 7.50 x 4.00 x 5.02 191 x 102 x 128 7.50 x 6.00 x 5.28 191 x 152 x 134 9.50 x 6.00 x 5.78 241 x 152 x 147 11.50 x 8.00 x 6.78 292 x 203 x 172 13.50 x 10.00 x 7.28 343 x 254 x 185 15.50 x 12.00 x 8.28 394 x 305 x 210 17.50 x 14.00 x 8.78 445 x 356 x 223 Panel Size Steel Aluminum D x E Panel Panel in./mm No Panel No Panel No Panel No Panel A6P4 A6P4AL 4.88 x 2.88 124 x 73 A6P6 A6P6AL 4.88 x 4.88 124 x 124 A8P6 A8P6AL 6.75 x 4.88 171 x 124 A10P8 A10P8AL 8.75 x 6.88 222 x 175 A12P10 A12P10AL 10.75 x 8.88 273 x 226 A14P12 A14P12AL 12.75 x 10.88 324 x 276 A16P14 A16P14AL 14.75 x 12.88 375 x 327 Mounting GxH in./mm 4.75 x 2.00 121 x 51 6.75 x 2.00 171 x 51 6.75 x 4.00 171 x 102 8.75 x 4.00 222 x 102 10.75 x 6.00 273 x 152 12.75 x 8.00 324 x 203 14.75 x 10.00 375 x 254 16.75 x 12.00 425 x 305 Overall LxW in./mm 6.00 x 5.39 152 x 137 8.00 x 5.39 203 x 137 8.00 x 7.39 203 x 188 10.00 x 7.39 254 x 188 12.00 x 9.39 305 x 239 14.00 x 11.39 256 x 289 16.00 x 13.39 406 x 340 18.00 x 15.39 457 x 391 F in./mm 4.50 114 4.50 114 4.75 121 5.25 133 6.25 159 6.75 171 7.75 197 8.25 210 J in./mm 4.13 105 4.13 105 4.38 111 4.63 118 5.13 130 5.63 143 6.13 156 6.63 168 K in./mm 1.00 25 1.00 25 1.00 25 1.25 32 1.75 44 1.75 44 2.25 57 2.25 57 V in./mm --0.31 8 0.31 8 0.25 6 0.25 6 0.25 6 0.25 6 0.25 6 X in./mm 4.22 107 6.22 158 6.22 158 8.12 206 9.97 253 11.97 304 13.78 350 15.78 401 Y in./mm 3.59 91 3.59 91 5.59 142 5.50 140 7.34 186 9.34 237 11.16 283 13.16 334 K in./mm 1.00 25 1.25 32 1.75 44 1.75 44 2.25 57 2.25 57 V in./mm 0.31 8 0.25 6 0.25 6 0.25 6 0.25 6 0.25 6 Number of Latches 1 1 2 2 3 2 2 2 2 Purchase panels separately. Optional stainless steel, aluminum and composite material panels available for most sizes. Standard Product  Window Cover with Quick-Release Latches Catalog Number A865JFGQRPWR A1066JFGQRPWR A1287JFGQRPWR A14107JFGQRPWR A16128JFGQRPWR A18149JFGQRPWR AxBxC in./mm 8.00 x 6.00 x 5.00 203 x 152 x 127 10.00 x 6.00 x 6.00 254 x 152 x 152 12.00 x 8.00 x 7.00 305 x 203 x 178 14.00 x 10.00 x 7.00 356 x 254 x 178 16.00 x 12.00 x 8.00 406 x 305 x 203 18.00 x 14.00 x 9.00 457 x 356 x 229 Inside Dimensions AxBxC in./mm 7.50 x 6.00 x 5.03 191 x 152 x 128 9.50 x 6.00 x 5.53 241 x 152 x 140 11.50 x 8.00 x 6.53 292 x 203 x 166 13.50 x 10.00 x 7.03 343 x 254 x 179 15.50 x 12.00 x 8.03 394 x 305 x 204 17.50 x 14.00 x 8.53 445 x 356 x 217 Steel Panel A6P6 A8P6 A10P8 A12P10 A14P12 A16P14 Panel Size Aluminum D x E Panel in./mm A6P6AL 4.88 x 4.88 124 x 124 A8P6AL 6.75 x 4.88 171 x 124 A10P8AL 8.75 x 6.88 222 x 175 A12P10AL 10.75 x 8.88 273 x 226 A14P12AL 12.75 x 10.88 324 x 276 A16P14AL 14.75 x 12.88 375 x 327 Mounting GxH in./mm 6.75 x 4.00 171 x 102 8.75 x 4.00 222 x 102 10.75 x 6.00 273 x 152 12.75 x 8.00 324 x 203 14.75 x 10.00 375 x 254 16.75 x 12.00 425 x 305 Overall LxW in./mm 8.00 x 7.39 203 x 188 10.00 x 7.39 254 x 188 12.00 x 9.39 305 x 239 14.00 x 11.39 253 x 289 16.00 x 13.39 406 x 340 18.00 x 15.39 457 x 391 Window Size MxN in./mm 4.55 x 4.00 116 x 102 6.55 x 4.00 166 x 102 8.25 x 5.84 210 x 148 10.28 x 6.84 261 x 174 12.34 x 9.10 313 x 231 14.45 x 11.06 367 x 281 F in./mm 4.52 115 5.00 127 6.00 152 6.52 166 7.52 191 8.00 203 J in./mm 4.38 111 4.63 118 5.13 130 5.63 143 6.13 156 6.63 168 Number of Latches 1 2 2 2 2 2 Purchase panels separately. Optional stainless steel, aluminum and composite material panels available for most sizes. EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 247 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch 3 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch 248 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 Fiberglass Mounting Bracket Kit Bracket is molded from fiberglass reinforced polyester. Kit includes four brackets, hardware and installation instructions. Mounting hole dimensions with mounting brackets installed are: [G + 2.50 (64 mm)] x [H + .50 (13 mm)] See Screw- or Hinged-Cover with Quick-Release Latch, Type 4X tables for G and H dimensions. Bulletin: A50Y Catalog Number A50MFKR EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 249 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch 3 Fiberglass Overlapping Cover Raised Cover with Screws, Type 4X Overlapping Cover INDUSTRY STANDARDS • UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 Enclosure flammability per UL 508A NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 CSA File No. 217184: Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements APPLICATION • • • • • Non-Metallic See also Accessories. H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION Compression-molded fiberglass construction Overlapping solid raised-cover Cover fastens with screws Type 304 stainless steel piano hinges on hinged models Integral mounting brackets 250 FINISH Standard fiberglass material finish is RAL 7035 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES Enclosures feature a raised, overlapping-cover design that ensures a more-secure seal and offers increased internal space for mounting components. Available with removable and hinged covers for application flexibility. SPECIFICATIONS • Enclosures protect equipment and operators from indirect electrical contact Material is halogen free Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: HJ SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Catalog Number RHJ1008HWLG RHJ1008WLG RHJ1210HWLG RHJ1210WLG RHJ1412HWLG RHJ1412WLG RHJ1614HWLG RHJ1614WLG RHJ1816HWLG RHJ1816WLG AxBxC in./mm 9.70 x 7.71 x 5.91 246 x 196 x 150 9.70 x 7.71 x 5.91 246 x 196 x 150 11.68 x 9.69 x 6.16 296 x 246 x 156 11.68 x 9.69 x 6.16 296 x 246 x 156 13.62 x 11.62 x 7.24 346 x 295 x 184 13.62 x 11.62 x 7.24 346 x 295 x 184 15.62 x 13.62 x 7.24 396 x 346 x 184 15.62 x 13.62 x 7.24 396 x 346 x 184 17.48 x 15.77 x 9.44 444 x 400 x 240 17.48 x 15.77 x 9.44 444 x 400 x 240 Door Fasteners Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws D in./mm 6.86 174 6.86 174 7.05 179 7.05 179 8.13 207 8.13 207 8.13 207 8.13 207 10.25 260 10.25 260 F in./mm 6.49 165 6.49 165 6.73 171 6.73 171 7.81 194 7.81 194 7.81 194 7.81 194 10.01 254 10.01 254 G in./mm 10.75 273 10.75 273 12.75 324 12.75 324 14.75 375 14.75 375 16.75 425 16.75 425 18.75 476 18.75 476 H in./mm 6.00 152 6.00 152 6.00 152 6.00 152 10.00 254 10.00 254 12.00 305 12.00 305 12.00 305 12.00 305 I in./mm 11.51 292 11.51 292 13.51 343 13.51 343 15.51 394 15.51 394 17.51 445 17.51 445 19.51 496 19.51 496 J in./mm 4.50 114 4.50 114 4.66 118 4.66 118 5.63 143 5.63 143 5.63 143 5.63 143 7.76 197 7.76 197 K in./mm 3.15 80 3.15 80 3.15 80 3.15 80 3.25 82 3.25 82 3.25 82 3.25 82 3.25 82 3.25 82 L in./mm 11.22 285 11.22 285 13.22 336 13.22 338 15.22 387 15.22 387 17.22 437 17.22 437 19.22 488 19.22 488 P in./mm 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.25 311 14.25 362 14.25 362 16.25 413 16.25 413 Q in./mm 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 12.25 311 12.24 311 14.25 362 14.25 362 W in./mm 9.22 234 9.22 234 11.22 285 11.22 285 13.22 336 13.22 336 15.22 386 15.30 289 17.22 437 17.22 437 Steel Panel A10P8 Alum Panel A10P8AL A10P8 A10P8AL A12P10 A12P10AL A12P10 A12P10AL A14P12 A14P12AL A14P12 A14P12AL A16P14 A16P14AL A16P14 A16P14AL A18P16 A18P16AL A18P16 A18P16AL Panel Size in./mm 8.75 x 6.88 222 x 102 8.75 x 6.88 222 x 102 10.75 x 8.88 273 x 226 10.75 x 8.88 273 x 226 12.75 x 10.88 324 x 276 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 16.75 x 14.88 425 x 378 A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 251 Fiberglass Overlapping Cover 3 Fiberglass Overlapping Cover Raised Cover with Latches, Type 4X INDUSTRY STANDARDS • UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 Enclosure flammability per UL 508A NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 CSA File No. 217184: Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements FINISH Fiberglass material is RAL 7035 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES APPLICATION Enclosures feature a raised, hinged, overlapping cover design that ensures a more-secure seal and offers increased internal space for mounting components. Available with solid and window covers. Latches provide easy access and security. See also Accessories. H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION SPECIFICATIONS • • • • • • • Enclosures protect equipment and operators from indirect electrical contact Material is halogen free Compression-molded fiberglass construction Overlapping raised solid- and window-covers W indows are clear polycarbonate Cover fastens with padlockable Type 316 stainless steel latches Type 304 stainless steel piano hinges Integral mounting brackets Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: HJ Standard Product  Catalog Number RHJB1008HWPL1LG RHJB1210HWPL2LG RHJB1412HWPL2LG RHJB1614HWPL2LG RHJ1008HWPL1LG RHJ1210HWPL2LG RHJ1412HWPL2LG RHJ1614HWPL2LG RHJ1816HWPL2LG AxBxC in./mm 9.70 x 7.71 x 5.91 246 x 196 x 150 11.68 x 9.69 x 6.16 296 x 246 x 156 13.62 x 11.62 x 7.24 346 x 295 x 184 15.62 x 13.62 x 7.24 396 x 346 x 184 9.70 x 7.71 x 5.91 246 x 196 x 150 11.68 x 9.69 x 6.16 296 x 246 x 156 13.62 x 11.62 x 7.24 346 x 295 x 184 15.62 x 13.62 x 7.24 396 x 346 x 184 17.48 x 15.77 x 9.44 444 x 400 x 240 No. of Latches 1 2 2 2 1 2 2 2 2 Window Size MxN in./mm 8.00 x 6.00 203 x 152 10.00 x 8.00 254 x 203 12.00 x 10.00 305 x 254 14.00 x 12.00 356 x 305 --------------------- D in./mm 6.86 174 7.05 179 8.13 207 8.13 207 6.86 174 7.05 179 8.13 207 8.13 207 10.25 260 F in./mm 6.49 165 6.73 171 7.81 194 7.81 194 6.49 165 6.73 171 7.81 194 7.81 194 10.01 254 G in./mm 10.75 273 12.75 324 14.75 375 16.75 425 10.75 273 12.75 324 14.75 375 16.75 425 18.74 476 H in./mm 6.00 152 8.00 203 10.00 254 12.00 305 6.00 152 6.00 152 10.00 254 12.00 305 12.00 305 I in./mm 11.51 292 13.51 343 15.50 394 17.51 445 11.51 292 13.51 343 15.51 394 17.51 445 19.51 496 J in./mm 4.50 114 4.66 118 5.63 143 5.63 143 4.50 114 4.66 118 5.63 143 5.63 143 7.76 197 K in./mm 3.15 80 3.15 80 3.25 82 3.25 82 3.15 80 3.15 80 3.25 82 3.25 82 3.25 82 L in./mm 11.22 285 13.22 336 15.32 387 17.22 437 11.22 285 13.22 336 15.22 387 17.22 437 19.22 488 P in./mm 8.25 210 10.25 260 12.25 311 14.25 362 8.25 210 10.25 260 12.25 311 14.25 362 16.25 413 Q in./mm 6.25 159 8.25 210 10.25 260 12.25 311 6.25 159 8.25 210 10.25 260 12.25 311 14.25 3.62 W in./mm 9.22 234 11.22 285 13.22 336 15.22 386 9.22 234 11.22 285 13.22 336 15.22 386 17.22 437 A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. 252 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION  Panels Enclosure Catalog Number RHJB1008HWPL1LG Steel Panel A10P8 Aluminum Panel A10P8AL RHJB1210HWPL2LG A12P10 A12P10AL RHJB1412HWPL2LG A14P12 A14P12AL RHJB1614HWPL2LG A16P14 A16P14AL RHJ1008HWPL1LG A10P8 A10P8AL RHJ1210HWPL2LG A12P10 A12P10AL RHJ1412HWPL2LG A14P12 A14P12AL RHJ1614HWPL2LG A16P14 A16P14AL RHJ1816HWPL2LG A18P16 A18P16AL Panel Size in./mm 8.75 x 6.88 222 x 102 10.75 x 8.88 273 x 226 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327 8.75 x 6.88 222 x 102 10.75 x 8.88 273 x 226 12.75 x 10.88 324 x 276 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 253 Fiberglass Overlapping Cover 3 Fiberglass Overlapping Cover Flat Cover with Screws, Type 4X INDUSTRY STANDARDS SPECIFICATIONS UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 Enclosure flammability per UL 508A NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 CSA File No. 217184: Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements APPLICATION • • • • • • • Compression-molded fiberglass construction Overlapping flat, solid-covers Cover fastens with screws Type 304 stainless steel piano hinges on hinged models Integral mounting brackets Enclosures protect equipment and operators from indirect electrical contact Material is halogen free FINISH Enclosures feature a flat, overlapping cover design that ensures a more-secure seal. Available with removable and hinged covers for application flexibility. Standard fiberglass material finish is RAL 7035 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview Bulletin: HJ 254 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Catalog Number HJ606HWLG HJ606WLG HJ806HWLG HJ806WLG HJ1008HWLG HJ1008WLG HJ1210HWLG HJ1210WLG HJ1412HWLG HJ1412WLG HJ1614HWLG HJ1614WLG HJ1816HWLG HJ1816WLG AxBxC in./mm 5.71 x 5.72 x 4.05 145 x 145 x 103 5.71 x 5.72 x 4.05 145 x 145 x 103 7.71 x 5.72 x 4.05 196 x 145 x 103 7.71 x 5.72 x 4.05 196 x 145 x 103 9.71 x 7.21 x 4.30 247 x 196 x 109 9.71 x 7.21 x 4.30 247 x 196 x 109 11.68 x 9.69 x 4.62 297 x 246 x 117 11.68 x 9.69 x 4.62 297 x 246 x 117 13.81 x 11.81 x 5.99 351 x 300 x 152 13.81 x 11.81 x 5.99 351 x 300 x 152 15.81 x 13.81 x 5.99 402 x 351 x 152 15.81 x 13.81 x 5.99 402 x 351 x 152 17.81 x 15.81 x 8.86 452 x 402 x 225 17.81 x 15.81 x 8.86 452 x 402 x 225 Door Fasteners Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws Hinged, 2 screws 4 screws D in./mm 4.90 125 4.90 125 4.90 125 4.90 126 5.15 131 5.15 131 5.42 138 5.42 138 6.79 172 6.79 172 6.68 170 6.68 170 9.55 243 9.55 243 F in./mm 4.62 118 4.62 118 4.62 118 4.62 118 4.88 125 4.88 125 5.20 132 5.20 132 6.44 164 6.44 164 6.44 164 6.44 164 9.32 237 9.32 237 G in./mm 6.75 171 6.75 171 8.75 222 8.75 222 10.75 273 10.75 273 12.75 324 12.75 324 14.75 375 14.75 375 16.75 425 16.75 425 18.75 476 18.75 476 H in./mm 4.00 102 4.00 102 4.00 102 4.00 102 6.00 152 6.00 152 8.00 203 8.00 203 10.00 254 10.00 254 12.00 305 12.00 305 12.00 305 12.00 305 I in./mm 7.51 191 7.51 191 9.51 242 9.51 242 11.51 292 11.51 292 13.51 343 13.51 343 15.51 394 15.51 394 17.51 445 17.51 445 19.51 495 19.51 495 J in./mm 4.28 109 4.28 109 4.28 109 4.28 109 4.28 109 4.28 109 4.66 118 4.66 118 5.63 143 5.63 143 5.63 143 5.63 143 8.56 217 8.56 217 K in./mm 1.38 35 1.38 35 1.38 35 1.38 35 1.67 42 1.67 42 1.77 45 1.77 45 1.75 45 1.75 45 1.75 45 1.75 45 1.75 45 1.75 45 L in./mm 6.00 152 6.00 152 9.31 236 9.31 236 11.25 286 11.25 286 13.23 336 13.23 336 15.29 388 15.29 388 17.29 439 17.29 439 19.29 790 19.29 790 P in./mm 4.25 108 4.25 108 6.25 159 6.25 159 8.25 210 8.25 210 10.25 260 10.25 260 10.25 260 10.25 260 14.25 362 14.25 362 16.25 413 16.25 413 Q in./mm 4.25 108 4.25 108 4.25 108 4.25 108 6.24 158 6.24 158 8.25 210 8.25 210 12.25 311 12.25 311 12.25 311 12.25 311 14.25 362 14.25 362 W in./mm 5.97 152 5.97 152 7.31 186 7.31 186 9.25 235 9.25 235 11.23 285 11.23 285 13.29 338 13.29 338 15.29 388 15.29 388 17.29 439 17.29 439 Steel Panel A6P6 Aluminum Panel A6P6AL A6P6 A6P6AL A8P6 A8P6AL A8P6 A8P6AL A10P8 A10P8AL A10P8 A10P8AL A12P10 A12P10AL A12P10 A12P10AL A14P12 A14P12AL A14P12 A14P12AL A16P14 A16P14AL A16P14 A16P14AL A18P16 A18P16AL A18P16 A18P16AL Panel Size in./mm 4.88 x 4.88 124 x 124 4.88 x 4.88 124 x 124 6.75 x 4.88 171 x 124 6.75 x 4.88 171 x 124 8.75 x 6.88 222 x 102 8.75 x 6.88 222 x 102 10.75 x 8.88 273 x 226 10.75 x 8.88 2.73 x 226 12.75 x 10.88 324 x 276 12.75 x 10.88 324 x 276 14.75 x 12.88 3.75 x 327 14.75 x 12.88 375 x 327 16.75 x 14.88 425 x 378 16.75 x 14.88 375 x 378 A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com 3 Non-Metallic 255 Fiberglass Overlapping Cover 3 Fiberglass Overlapping Cover Flat Cover with Latches, Type 4X INDUSTRY STANDARDS • UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 Enclosure flammability per UL 508A NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 CSA File No. 217184: Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements APPLICATION SPECIFICATIONS Compression-molded fiberglass construction Overlapping solid- and window-cover models are available W indows are clear polycarbonate Cover fastens with padlockable Type 316 stainless steel latches Type 304 stainless steel piano hinges Integral mounting brackets 256 Non-Metallic FINISH Standard fiberglass material is RAL 7035 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES Enclosures feature a flat, overlapping cover design that ensures a more-secure seal. Available with solid and window covers. Latches provide easy access and security. • • • • • • • Enclosures protect equipment and operators from indirect electrical contact Material is halogen free See also Accessories. H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: HJ SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Catalog Number HJ606HWPL1LG HJ806HWPL1LG HJ1008HWPL1LG HJ1210HWPL2LG HJ1412HWPL2LG HJ1614HWPL2LG HJ1816HWPL2LG HJB606HWPL1LG HJB806HWPL1LG HJB1008HWPL1LG HJB1210HWPL2LG HJB1412HWPL2LG HJB1614HWPL2LG HJB1816HWPL2LG AxBxC in./mm 5.71 x 5.72 x 4.05 145 x 145 x 103 7.71 x 5.72 x 4.05 196 x 145 x 103 9.71 x 7.21 x 4.30 247 x 196 x 109 11.68 x 9.69 x 4.62 297 x 246 x 117 13.81 x 11.81 x 5.99 351 x 300 x 152 15.81 x 13.81 x 5.99 402 x 351 x 152 17.81 x 15.81 x 8.86 452 x 402 x 225 5.71 x 5.72 x 4.05 145 x 145 x 103 7.71 x 5.72 x 4.05 196 x 145 x 103 9.71 x 7.21 x 4.30 247 x 196 x 109 11.68 x 9.69 x 4.62 297 x 246 x 117 13.81 x 11.81 x 5.99 351 x 300 x 152 15.81 x 13.81 x 5.99 402 x 351 x 152 17.81 x 15.81 x 8.86 452 x 402 x 225 Window Size No. of MxN Latches in./mm 1 — — 1 — — 1 — — 2 — — 2 — — 2 — — 2 — — 1 4.00 x 4.00 102 x 102 1 6.00 x 4.00 152 x 102 1 8.00 x 6.00 203 x 152 2 10.00 x 8.00 254 x 203 2 12.00 x 10.00 305 x 254 2 14.00 x 12.00 356 x 305 2 16.00 x 14.00 406 x 356 D in./mm 4.90 125 4.90 126 5.15 131 5.42 138 6.79 172 6.68 170 9.55 243 4.90 125 4.90 125 5.15 131 5.42 138 6.79 172 6.68 170 9.55 243 F in./mm 4.62 118 4.62 118 4.88 125 5.20 132 6.44 142 6.44 164 9.32 237 4.62 118 4.62 118 4.88 125 5.20 132 6.44 164 6.44 164 9.32 237 G in./mm 6.75 171 8.75 222 10.75 273 12.75 324 14.75 375 16.75 425 18.75 476 6.75 171 8.75 222 10.75 273 12.75 324 14.75 375 16.75 425 18.75 476 H in./mm 4.00 102 4.00 102 6.00 152 8.00 203 10.00 254 12.00 305 12.00 305 4.00 102 4.00 102 6.00 152 8.00 203 10.00 254 12.00 305 12.00 305 I in./mm 7.51 191 9.51 242 11.51 292 13.51 343 15.51 940 17.51 445 19.51 495 7.51 191 9.51 252 11.51 292 13.51 343 15.51 940 17.51 445 19.51 495 J in./mm 4.28 109 4.28 109 4.28 109 4.66 118 5.63 143 5.63 143 8.56 217 4.28 109 4.28 109 4.28 109 4.66 118 5.63 143 5.63 143 8.56 217 K in./mm 1.38 35 1.38 35 1.67 42 1.75 45 1.75 45 1.75 45 1.75 45 1.38 35 1.38 35 1.67 42 1.75 45 1.75 45 1.75 45 1.75 45 L in./mm 6.00 152 9.31 236 11.25 286 13.23 336 15.29 388 17.29 439 19.29 790 6.00 152 9.31 236 11.25 286 13.23 336 15.29 388 17.29 439 19.29 490 P in./mm 4.25 108 6.25 159 8.25 210 10.25 260 10.24 260 14.25 363 16.25 413 4.25 108 6.25 159 8.25 210 10.25 260 10.24 260 14.25 363 16.25 413 Q in./mm 4.25 108 4.25 108 6.24 158 8.25 210 12.26 311 12.25 311 14.25 362 4.25 108 4.25 108 6.24 158 8.25 210 12.26 311 12.25 311 14.25 362 W in./mm 5.97 152 7.31 186 9.25 235 11.23 285 13.29 338 15.29 388 17.29 439 5.97 152 7.31 186 9.25 236 11.23 285 13.29 338 15.29 388 17.29 439 Steel Panel A6P6 A8P6 A10P8 A12P10 A14P12 A16P14 A18P16 A6P6 A8P6 A10P8 A12P10 A14P12 A16P14 A18P16 Aluminum Panel Size Panel in./mm A6P6AL 4.88 x 4.88 124 x 124 A8P6AL 6.75 x 4.88 171 x 124 A10P8AL 8.75 x 6.88 222 x 102 A12P10AL 10.75 x 8.88 273 x 226 A14P12AL 12.75 x 10.88 324 x 276 A16P14AL 14.75 x 12.88 375 x 327 A18P16AL 16.75 x 14.88 425 x 378 A6P6AL 4.88 x 4.88 124 x 124 A8P6AL 6.75 x 1.88 171 x 124 A10P8AL 8.75 x 6.88 222 x 102 A12P10AL 10.78 x 8.88 273 x 226 A14P12AL 12.75 x 10.88 324 x 276 A16P14AL 14.75 x 12.88 375 x 327 A18P16AL 16.75 x 14.88 425 x 378 A x B x C are internal dimensions. 3 Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 257 Fiberglass Overlapping Cover 3 Fiberglass Overlapping Cover Flat Clear Cover with Latches, Type 4X SPECIFICATIONS • • • • • • • Compression-molded fiberglass construction Clear polycarbonate viewing area Cover fastens with padlockable Type 316 stainless steel latches Type 304 stainless steel piano hinges Integral mounting brackets Enclosures protect equipment and operators from indirect electrical contact Material is halogen free FINISH Standard fiberglass material is RAL 7035 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted ACCESSORIES INDUSTRY STANDARDS UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E54315 Enclosure flammability per UL 508A See also Accessories. H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 CSA File No. 217184: Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. APPLICATION Bulletin: HJ Enclosures feature a flat, overlapping clear cover design that ensures a more-secure seal and provides a larger viewing area than a traditional window. Latches provide easy access and security. Standard Product  Catalog Number CHJ606HWPL1LG CHJ806HWPL1LG CHJ1008HWPL1LG CHJ1210HWPL2LG CHJ1412HWPL2LG CHJ1614HWPL2LG CHJ1816HWPL2LG Window Size No. of NxM AxBxC in./mm Latches in./mm 5.71 x 5.72 x 4.05 1 6.00 x 6.00 145 x 145 x 103 152 x 152 7.71 x 5.72 x 4.05 1 8.00 x 6.00 196 x 145 x 103 203 x 152 9.71 x 7.21 x 4.30 1 10.00 x 8.00 247 x 196 x 109 254 x 203 11.68 x 9.69 x 4.62 2 12.00 x 10.00 297 x 246 x 117 305 x 254 13.81 x 11.81 x 5.99 2 14.00 x 12.00 351 x 300 x 152 356 x 305 15.81 x 13.81 x 5.99 2 16.00 x 14.00 402 x 351 x 152 406 x 356 17.81 x 15.81 x 8.86 2 18.00 x 16.00 452 x 402 x 225 457 x 406 D in./mm 4.90 125 4.90 125 5.15 131 5.42 138 6.79 172 6.68 170 9.55 243 F in./mm 4.62 118 4.62 118 4.88 124 5.20 132 6.44 164 6.44 164 9.32 237 G in./mm 6.75 171 8.75 222 10.75 273 12.75 324 14.75 375 16.75 425 18.75 476 H in./mm 4.00 102 4.00 102 6.00 152 8.00 203 10.00 254 12.00 305 12.00 305 I in./mm 7.51 191 9.51 242 11.51 292 13.51 343 15.51 394 17.51 445 19.51 495 J in./mm 4.28 109 4.28 109 4.28 109 4.66 118 5.63 143 5.63 143 8.56 217 K in./mm 1.38 35 1.38 35 1.67 42 1.77 45 1.75 45 1.75 45 1.75 45 L in./mm 6.00 152 9.31 236 11.25 286 13.23 336 15.29 388 17.29 439 19.29 790 P in./mm 4.25 108 6.25 159 8.25 210 10.25 260 10.25 260 14.25 363 16.25 413 Q in./mm 4.25 108 4.25 108 6.24 158 8.25 210 10.25 260 12.25 311 14.25 362 W in./mm 5.97 152 7.31 186 9.25 235 11.23 285 13.29 338 15.29 388 17.29 439 Steel Panel A6P6 A8P6 A10P8 A12P10 A14P12 A16P14 A18P16 Aluminum Panel Size Panel in./mm A6P6AL 4.88 x 4.88 124 x 124 A8P6AL 6.75 x 4.88 171 x 124 A10P8AL 8.75 x 6.88 222 x 102 A12P10AL 10.75 x 8.88 273 x 226 A14P12AL 12.75 x 10.88 324 x 276 A16P14AL 14.75 x 12.88 375 x 327 A18P16AL 16.75 x 14.88 425 x 378 A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. 258 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 259 Fiberglass Overlapping Cover 3 Fiberglass ULTRX ULTRX, Type 4X ULTRX SPECIFICATIONS • • • • • • • • • • • • • • • INDUSTRY STANDARDS FINISH Mounting brackets required to meet UL/CSA external mounting requirements. Standard exterior surface painted light-gray acrylic enamel for enhanced UV protection. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E619977 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type 4X H2OMIT Thermoelectric Dehumidifier HOL-SEALERS Non-Metallic Hole Seals Panels for Type 3R, 4, 4X, 12 and 13 Enclosures Rack Angles (Type RA) NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 CSA File No. 42186: Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements APPLICATION Compression-molded fiberglass material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties, including high-impact resistance Fiberglass is easily punched, drilled, filed or sawed Gasket assures water-tight and dust-tight seal Enclosure may be rotated 180 degrees for left and right hinging Molded-in drip shields are standard with each enclosure Impact-resistant polycarbonate window is permanently bonded in place Fiberglass mounting brackets and stainless steel attachment screws are provided with each enclosure Unique hinge design allows for standard 180 degree door opening with a maximum opening of 270 degrees Door hinges are replaceable Type 316 stainless steel quarter-turn latch. Optional keylocking or padlocking handle available. Molded-in DIN bosses Molded bosses on door provide additional mounting provisions Integral mounting rails provide infinite panel adjustment front to back Optional data pocket is high-impact thermoplastic Material is halogen free Providing outstanding protection against corrosion and the elements, the clean lines and molded, embossed design of ULTRX fiberglass enclosures make them the most stylish and aesthetically pleasing of their class. These enclosures feature hidden hinges, a padlocking capability for security, and flexible internal mounting options. MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: UX1 Standard Product  Catalog Number UU504020 Door Style Solid UU504020W Window UU606020 Solid UU606020W Window UU605025 Solid UU605025W Window UU504030 Solid UU504030W Window UU606030 Solid UU606030W Window UU756030 Solid 260 Non-Metallic External Dimensions LxW mm/in. 513 x 413 20.20 x 16.26 513 x 413 20.20 x 16.26 625 x 612 24.61 x 24.09 625 x 612 24.61 x 24.09 625 x 513 24.61 x 20.20 625 x 513 24.61 x 20.20 513 x 412 20.20 x 16.22 513 x 412 20.20 x 16.22 625 x 612 24.61 x 24.09 625 x 612 24.61 x 24.09 775 x 612 30.51 x 24.09 Internal Dimensions AxBxC mm/in. 496 x 396 x 220 19.53 x 15.59 x 8.66 496 x 396 x 220 19.53 x 15.59 x 8.66 608 x 595 x 220 23.94 x 23.43 x 8.66 608 x 595 x 220 23.94 x 23.43 x 8.66 608 x 496 x 270 23.94 x 19.53 x 10.63 608 x 496 x 270 23.94 x 19.53 x 10.63 496 x 395 x 321 19.53 x 15.55 x 12.64 496 x 395 x 321 19.53 x 15.55 x 12.64 608 x 595 x 321 23.94 x 23.43 x 12.64 608 x 595 x 321 23.94 x 23.43 x 12.64 758 x 595 x 321 29.84 x 23.43 x 12.64 Panel A20P16 Conductive Panel A20P16G A20P16 A20P16G A24P24 A24P24G A24P24 A24P24G A24P20 A24P20G A24P20 A24P20G A20P16 A20P16G A20P16 A20P16G A24P24 A24P24G A24P24 A24P24G A30P24 A30P24G Panel Size DxE mm/in. 432 x 330 17.00 x 12.99 439 x 330 17.00 x 12.99 533 x 533 20.98 x 20.98 533 x 533 20.98 x 20.98 533 x 432 20.98 x 17.00 533 x 432 20.98 x 17.00 432 x 330 17.00 x 12.99 432 x 330 17.00 x 12.99 533 x 533 20.98 x 20.98 533 x 533 20.98 x 20.98 686 x 533 27.01 x 20.98 Mounting GxH mm/in. 359 x 459 14.13 x 18.07 359 x 459 14.13 x 18.07 559 x 572 22.01 x 22.52 559 x 572 22.01 x 22.52 457 x 570 17.99 x 22.44 457 x 570 17.99 x 22.44 355 x 455 13.98 x 17.91 355 x 455 13.98 x 17.91 555 x 568 21.85 x 22.36 555 x 568 21.85 x 22.36 555 x 718 21.85 x 28.27 SUBJECT TO CHANGE WITHOUT NOTICE Window Size MxN mm/in. — — 386 x 286 15.20 x 11.26 — — 498 x 486 19.61 x 19.13 — — 498 x 386 19.61 x 15.20 — — 386 x 286 15.20 x 11.26 — — 498 x 486 19.61 x 19.13 — — F mm/in. 186 7.32 186 7.32 186 7.32 186 7.32 239 9.41 239 9.41 287 11.30 287 11.30 287 11.30 287 11.30 287 11.30 J mm/in. 297 11.69 297 11.69 500 19.68 500 19.68 400 15.75 400 15.75 300 11.81 300 11.81 500 19.68 500 19.68 500 19.68 K mm/in. 19 0.75 19 0.75 21 0.83 21 0.83 21 0.83 21 0.83 19 0.75 19 0.75 21 0.83 21 0.83 21 0.83 S mm/in. 286 11.26 286 11.26 489 19.25 489 19.25 387 15.24 387 15.24 286 11.26 286 11.26 489 19.25 489 19.25 489 19.25 T mm/in. 387 15.24 387 15.24 489 19.25 489 19.25 489 19.25 489 19.25 387 15.24 387 15.24 489 19.25 489 19.25 641 25.24 EQUIPMENT PROTECTION Catalog Number UU756030W Door Style Window UU1008030 Solid UU1008030W Window UU606040 Solid UU606040W Window UU756040 Solid UU756040W Window External Dimensions LxW mm/in. 775 x 612 30.51 x 24.09 1025 x 825 40.35 x 32.48 1025 x 825 40.35 x 32.48 625 x 612 24.61 x 24.09 625 x 612 24.61 x 24.09 775 x 612 30.51 x 24.09 775 x 612 30.51 x 24.09 Internal Dimensions AxBxC mm/in. 758 x 595 x 321 29.84 x 23.43 x 12.64 1008 x 808 x 321 39.68 x 31.81 x 12.64 1008 x 808 x 321 39.68 x 31.81 x 12.64 608 x 595 x 421 23.94 x 23.43 x 16.57 608 x 595 x 421 23.94 x 23.43 x 16.57 758 x 595 x 421 29.84 x 23.43 x 16.57 758 x 595 x 421 29.84 x 23.43 x 16.57 Panel A30P24 Conductive Panel A30P24G A40P30 A40P30G A40P30 A40P30G A24P24 A24P24G A24P24 A24P24G A30P24 A30P24G A30P24 A30P24G Panel Size DxE mm/in. 686 x 533 27.01 x 20.98 940 x 737 37.01 x 29.02 940 x 737 37.01 x 29.02 533 x 533 20.98 x 20.98 533 x 533 20.98 x 20.98 686 x 533 27.01 x 20.98 686 x 533 27.01 x 20.98 Mounting GxH mm/in. 555 x 718 21.85 x 28.27 768 x 968 30.24 x 38.11 768 x 968 30.24 x 38.11 555 x 568 21.85 x 22.36 555 x 568 21.85 x 22.36 555 x 718 21.85 x 28.27 555 x 718 21.85 x 28.27 Window Size MxN mm/in. 648 x 486 25.51 x 19.13 — — 898 x 698 35.35 x 27.48 — — 498 x 486 19.61 x 19.13 — — 648 x 486 25.51 x 19.13 F mm/in. 287 11.30 287 11.30 287 11.30 387 15.24 387 15.24 387 15.24 387 15.24 J mm/in. 500 19.68 700 27.56 700 27.56 500 19.68 500 19.68 500 19.68 500 19.68 K mm/in. 21 0.83 23 0.91 23 0.91 21 0.83 21 0.83 21 0.83 21 0.83 S mm/in. 489 19.25 692 27.24 692 27.24 489 19.25 489 19.25 489 19.25 489 19.25 T mm/in. 641 25.24 895 35.24 895 35.24 489 19.25 489 19.25 641 25.24 641 25.24 Purchase panels separately. Note: When installing enclosures in a right-hand hinge application that involves vibration, Hoffman recommends the use of pad-locking or key-locking quarter-turn latch accessories for door securement (UUHPL, UUHKL). 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 261 Fiberglass ULTRX 3 Fiberglass ULTRX ULTRX WiFi, Type 4X APPLICATION Ideal for locations such as tunnels, floor vaults, marinas, outside walls or rooftops, the lightweight ULTRX fiberglass WiFi cabinet does not impede WiFi or WLAN signals and has optional rack angles that can be added to support 19-in. rack-mount equipment. FEATURES INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability rating per UL 508 Window flammability rating per UL 508 • • • • • • • • • • • • SPECIFICATIONS • NEMA/EEMAC Type 4, 4X, 12, 13 CSA File No. LR42186: Type 4,4X, 12, 13 IEC 60529, IP66 Cabinets with solid doors are plenum rated.  iberglass is easily punched, drilled, filed or sawed F Gasket assures watertight and dusttight seal Enclosure may be rotated 180 degrees for left and right hinging Molded-in drip shields are standard with each enclosure Door opens 180 degrees Replaceable breakaway hinges Keylocking handle standard Molded-in DIN bosses Molded bosses on door provide additional mounting provisions Integral mounting rails provide infinite panel adjustment front to back Optional data pocket is high-impact thermoplastic Material is halogen free • • • Enclosure and door made of molded fiberglass polyester that resists chemicals and temperature change Impact-resistant polycarbonate window is permanently bonded in place Fiberglass mounting brackets and stainless steel attachment screws are provided with each enclosure Includes a 3/4-in. plywood panel for mounting equipment FINISH Standard exterior surface painted light-gray acrylic enamel for enhanced UV protection. Bulletin: DWS12 Standard Product  Internal Dimensions AxBxC Door Type mm/in. Panel Catalog Number AxBxC mm/in. DU606030P 608 x 595 x 321 Solid 608 x 595 x 321 A24P24WD 23.94 x 23.43 x 12.64 23.94 x 23.44 x 12.64 DU606030WP 608 x 595 x 321 Window 608 x 595 x 321 A24P24WD 23.94 x 23.43 x 12.64 23.94 x 23.44 x 12.64 Panel Size DxE mm/in. 533 x 533 21.00 x 21.00 533 x 533 21.00 x 21.00 Mounting GxH mm/in. 555 x 568 21.86 x 22.36 555 x 568 21.86 x 22.36 Window Size MxN mm/in. 498 x 486 19.62 x 19.12 498 x 486 19.62 x 19.12 F mm/in. 287 11.31 287 11.31 J mm/in. 500 19.68 500 19.68 K mm/in. 21 0.81 21 0.81 P mm/in. 62 2.43 62 2.43 Q mm/in. 68 2.68 68 2.68 R mm/in. 56 2.21 56 2.21 S mm/in. 489 19.25 489 19.25 T mm/in. 489 19.25 489 19.25 Wood panel included with enclosure. Optional steel panels must be ordered separately. Window size applies to window door cabinets only. 262 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 263 Fiberglass ULTRX 3 Fiberglass ULTRX Panel Bracket Kit Catalog Number UUPB Description ULTRX Panel Bracket Kit Pkg. Qty. 4 Panel Bracket Kit is used with steel panels and permits panel adjustment from front to rear. Fits all ULTRX sizes. Mounts on integrally molded body rail. Brackets are plated steel. All mounting hardware is included. Note: Front mounting position is approximately 140mm/5.5 in. back on 400mm enclosures. Bulletin: UX1Y Swing-Out Panel Catalog Number UU5040SP UU6050SP UU6060SP UU7560SP UU10080SP Fits A x B mm/in. 513 x 413 20.20 x 16.26 625 x 513 24.61 x 20.20 625 x 612 24.61 x 24.09 775 x 612 30.51 x 24.09 1025 x 825 40.35 x 32.48 L mm/in. 432 17.00 536 21.10 540 21.25 687 27.05 935 36.80 W mm/in. 330 12.99 432 17.00 535 21.08 535 21.08 737 29.00 Use UU6060SP with DATACOM ULTRX Fiberglass Type 4X WiFi Cabinet. Installs front-mounted panels in ULTRX fiberglass enclosures. The front-mounted swing panel complements window-door units and is suited for any application requiring a display of gauges, dials or any type of control equipment monitor. Made of 14 gauge plated steel. Easy installation; no drilling required. Fully adjustable front to rear. Panel and mounting hardware included. Note: Front mounting position is approximately 140mm/5.5 in. back on 400mm enclosures. Bulletin: UX1Y Grounding Device Grounding Device provides a means to attach a grounding conductor to an ULTRX Swing-Out Panel or Swing-Out Frame. Includes all installation hardware and instructions. Bulletin: UX1Y Catalog Number UUGK 264 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE Description ULTRX Grounding Device EQUIPMENT PROTECTION Panels for Type 3R, 4, 4X, 12 and 13 Enclosures Steel panels are 12 gauge with a white finish. Panel mounting hardware is furnished with all enclosures which accept these panels. Bulletin: DWS12, PNLWM Flange Thickness Catalog Number T (in.) A20P16 — A24P20 0.75 A24P24 0.75 A24P24WD 0.75 A30P24 0.75 A40P30 0.75 Flange Thickness T (mm) — 19 19 19 19 19 Panel Size D x E (in.) 17.00 x 13.00 21.00 x 17.00 21.00 x 21.00 21.00 x 21.00 27.00 x 21.00 37.00 x 29.00 Panel Size D x E (mm) 432 x 330 533 x 432 533 x 533 533 x 533 686 x 533 940 x 737 Number of Holes 4 4 4 4 4 4 Edge Flanges 0 2 2 — 2 4 Catalog number with “WD” is wood. 3 Rack Angles (Type RA) Catalog Number UURA6060 UURA7560 Fits A x B mm/in. 610 x 610 24.00 x 24.00 762 x 610 30.00 x 24.00 L mm/in. 552 21.75 705 27.75 N mm/in. 10 .38 19 .75 Rack Units 12 Pkg. Qty. 2 15 2 Use UURA6060 with DATACOM ULTRX Fiberglass Type 4X WiFi Cabinet. Pairs of full-length rack-mounting angles are available for mounting 1- in. (483-mm) rack-mounted equipment. Type RA angles are 14 gauge steel with .281-in. (7-mm) diameter mounting holes, spaced per EIA standard RS-310-D (universal spacing). Use Clip Nut Package (AN1032) to provide tapped holes at desired locations. Angles and mounting hardware are plated steel. Mounting hardware is furnished. Bulletin: UX1Y EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 265 Fiberglass ULTRX 3 Fiberglass ULTRX Keylock Kit and Padlock Kit Keylock Kit or pushbutton-style Padlock Kit is easily inserted in latch hole to prevent unauthorized personnel from gaining access to enclosure contents. Each kit is fully assembled for easy installation in the field. Type 316 stainless steel construction. Bulletin: UX1Y Catalog Number UUHKL UUHPL Description Keylock Kit Padlock Kit UUHKL: Internal key components are not stainless steel. UUHPL: Handles maintain UL 508A, Type 3, 4, 4X and 12 when properly installed on a Hoffman enclosure. Set up for 1/4-in. or 3/8-in. padlock. Swing Frame Catalog Number UU6060SF UU7560SF Fits A x B mm/in. 610 x 610 24.00 x 24.00 762 x 610 30.00 x 24.00 L mm/in. 540 21.25 687 27.05 W mm/in. 535 21.08 535 21.08 Rack Units 11 14 Use UU6060SF with DATACOM ULTRX Fiberglass Type 4X WiFi Cabinet. Swing Frame provides 19-in. rack-mounting capabilities with U-Style (Type RA) mounting hole pattern. Quarter-turn latch has 100-degree swing. Adjustable mounting provision. 14 gauge plated steel. Includes mounting hardware. Swing frame maintains enclosure rating if properly installed in a Hoffman enclosure. Note: Front mounting position is approximately 140mm/5.5 in. back on 400mm enclosures. Bulletin: UX1Y Door Stop Kit Door Stop Kit limits door to 120-degree opening. Field installable on all sizes of ULTRX enclosures. Type 304 stainless steel construction. Catalog Number UUDS Description Door Stop Kit Bulletin: UX1Y 266 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION ULTRX Key Insert Inserts can be substituted for the standard quarter-turn latch. Inserts are Type 316 stainless steel. Bulletin: UX1Y Catalog Number UUL3DB UULSC Insert Type Double-bit 3 mm Screw driver slot ULTRX Mounting Bracket Kit Kit is field-installable. Corrosionresistant fiberglass material. Type 316 stainless steel mounting hardware is included. Four mounting brackets per kit. Description Mounting Bracket Kit Catalog Number UUMF Kit Qty. 4 Bulletin: UX1Y 3 Screw Insert Kit Brass threaded inserts (10-32) with plated screws. Used on door bosses and DIN bosses. Catalog Number UUMH2 Description Screw Insert Kit Kit Qty. 4 inserts and 4 screws Bulletin: UX1Y Self-Tapping Screws Plated screws (1/4-15 x .88) mount panels and accessories to DIN bosses on back of enclosure. Catalog Number UUMH1 Description Self-Tapping Screws Pkg. Qty. 10 Bulletin: UX1Y EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 267 Fiberglass ULTRX 3 Fiberglass Hinge-Cover with 3-Point Latch or Quick-Release Latches Hinge-Cover with 3-Point Latch or Quick-Release Latches, Type 4X Hinge-Cover with 3-Point Latch or Quick-Release Latches INDUSTRY STANDARDS UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements APPLICATION SPECIFICATIONS • • • • •  iberglass-reinforced material has excellent temperature and F chemical resistance qualities and exhibits outstanding physical properties Type 316L stainless steel padlocking POWERGLIDE Handle on 3-point latch versions assures security and a water-tight seal while still allowing convenient access Quick-release latch versions feature fiberglass-reinforced polyester latches with integral Type 316L stainless steel padlocking hasp S eams are sealed; no holes or knockouts Enclosure may be rotated 180 degrees for left and right hinging Molded-in angular sealing flange directs water away from gasket area 268 Non-Metallic •  asket assures water-tight and dust-tight seal G Fiberglass material is easily punched, drilled, filed or sawed Data pocket is high-impact thermoplastic Plated steel collar studs for mounting optional panels and terminal block kits Material is halogen free FINISH A full range of modification options are available for wall-mount fiberglass enclosures, including variable depths to accommodate larger controls. These enclosures feature padlockable polyester latches, or Hoffman’s exclusive POWERGLIDE Handle with 3-point latching, for ease of access with increased security. • • • • • Standard fiberglass enclosure is gray inside and out. Handle is Type 316L stainless steel electropolished. Optional steel panels are painted white. Optional stainless steel, aluminum and composite panels available in select sizes. ACCESSORIES See also Accessories H2OMIT Thermoelectric Dehumidifier H2OMIT Vent Drains, Type 4X HOL-SEALERS Non-Metallic Hole Seals Panels Stainless Steel Window Kits Terminal Block Kit Assembly Thermal Accessories MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17W3, A17WM SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  3-Point Latch Catalog Number A24H2006GQRLP3PT A20H2008GQRLP3PT A24H2008GQRLP3PT A24H2408GQRLP3PT A30H2408GQRLP3PT A36H3008GQRLP3PT A24H2010GQRLP3PT A30H2410GQRLP3PT A24H2412GQRLP3PT A30H2412GQRLP3PT A36H3012GQRLP3PT AxBxC in./mm 24.25 x 20.25 x 6.00 616 x 514 x 152 20.19 x 20.25 x 8.00 513 x 514 x 203 24.25 x 20.25 x 8.00 616 x 514 x 203 24.19 x 24.19 x 8.00 614 x 614 x 203 30.25 x 24.25 x 8.00 768 x 616 x 203 36.25 x 30.25 x 8.00 921 x 768 x 203 24.25 x 20.25 x 10.00 616 x 514 x 254 30.25 x 24.25 x 10.00 768 x 616 x 254 24.19 x 24.19 x 12.00 614 x 614 x 305 30.25 x 24.25 x 12.00 768 x 616 x 305 36.25 x 30.25 x 12.00 921 x 768 x 305 Panel A24P20 Conductive Panel A24P20G A20P20 A20P20G A24P20 A24P20G A24P24 A24P24 A30P24 A30P24G A36P30 A36P30G A24P20 A24P20G A30P24 A30P24G A24P24 A24P24G A30P24 A30P24G A36P30 A36P30G Panel Size Height in./mm 21.00 x 17.00 533 x 432 17.00 x 17.00 432 x 432 21.00 x 17.00 533 x 432 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 33.00 x 27.00 838 x 686 21.00 x 17.00 533 x 432 27.00 x 21.00 686 x 533 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 33.00 x 27.00 838 x 686 GxH in./mm 25.86 x 14.00 657 x 356 21.81 x 14.00 554 x 356 25.86 x 14.00 657 x 356 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 37.58 x 24.00 955 x 610 25.86 x 14.00 657 x 356 31.95 x 18.00 812 x 457 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 37.58 x 24.00 955 x 610 Purchase panels separately. Optional stainless steel, composite and aluminum panels available for most sizes. See General Accessories. 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 269 Fiberglass Hinge-Cover with 3-Point Latch or Quick-Release Latches 3 Fiberglass Hinge-Cover with 3-Point Latch or Quick-Release Latches Standard Product  Quick-Release Latch Catalog Number A20H1606GQRLP A20H2006GQRLP A24H2006GQRLP A30H2406GQRLP A20H1608GQRLP A20H2008GQRLP A24H2008GQRLP A24H2408GQRLP A30H2408GQRLP A36H3008GQRLP A20H1610GQRLP A20H2010GQRLP A24H2010GQRLP A30H2410GQRLP A20H1612GQRLP A20H2012GQRLP A24H2012GQRLP A24H2412GQRLP A30H2412GQRLP A36H3012GQRLP A36H3612GQRLP A48H3612GQRLP A60H3612GQRLP A24H2016GQRLP A24H2416GQRLP A30H2416GQRLP A48H3616GQRLP A60H3616GQRLP A20H1620GQRLP A20H2020GQRLP A24H2020GQRLP A24H2420GQRLP A30H2420GQRLP A36H3020GQRLP A48H3620GQRLP A24H2024GQRLP A24H2424GQRLP A30H2424GQRLP AxBxC in./mm 20.19 x 16.25 x 6.00 513 x 413 x 152 20.19 x 20.25 x 6.00 513 x 514 x 152 24.25 x 20.25 x 6.00 616 x 514 x 152 30.25 x 24.25 x 6.00 768 x 616 x 152 20.19 x 16.25 x 8.00 513 x 413 x 203 20.19 x 20.25 x 8.00 513 x 514 x 203 24.25 x 20.25 x 8.00 616 x 514 x 203 24.19 x 24.19 x 8.00 614 x 614 x 203 30.25 x 24.25 x 8.00 768 x 616 x 203 36.25 x 30.25 x 8.00 921 x 768 x 203 20.19 x 16.25 x 10.00 513 x 413 x 254 20.19 x 20.25 x 10.00 513 x 514 x 254 24.25 x 20.25 x 10.00 616 x 514 x 254 30.25 x 24.25 x 10.00 768 x 616 x 254 20.19 x 16.25 x 12.00 513 x 413 x 305 20.19 x 20.25 x 12.00 513 x 514 x 305 24.25 x 20.25 x 12.00 616 x 514 x 305 24.19 x 24.19 x 12.00 614 x 614 x 305 30.25 x 24.25 x 12.00 768 x 616 x 305 36.25 x 30.25 x 12.00 921 x 768 x 305 36.25 x 36.25 x 12.00 921 x 921 x 305 48.25 x 36.25 x 12.00 1226 x 921 x 305 60.12 x 36.31 x 12.00 1527 x 922 x 305 24.25 x 20.25 x 16.00 616 x 514 x 406 24.19 x 24.19 x 16.00 614 x 614 x 406 30.25 x 24.25 x 16.00 768 x 616 x 406 48.25 x 36.25 x 16.00 1226 x 921 x 406 60.12 x 36.31 x 16.00 1527 x 922 x 406 20.19 x 16.25 x 20.00 513 x 413 x 508 20.19 x 20.25 x 20.00 513 x 514 x 508 24.25 x 20.25 x 20.00 616 x 514 x 508 24.19 x 24.19 x 20.00 614 x 614 x 508 30.25 x 24.25 x 20.00 768 x 616 x 508 36.25 x 30.25 x 20.00 921 x 768 x 508 48.25 x 36.25 x 20.00 1226 x 921 x 508 24.25 x 20.25 x 24.00 616 x 514 x 610 24.19 x 24.19 x 24.00 614 x 614 x 610 30.25 x 24.25 x 24.00 768 x 616 x 610 Panel A20P16 Cond. Panel A20P16G A20P20 A20P20G A24P20 A24P20G A30P24 A30P24G A20P16 A20P16G A20P20 A20P20G A24P20 A24P20G A24P24 A24P24G A30P24 A30P24G A36P30 A36P30G A20P16 A20P16G A20P20 A20P20G A24P20 A24P20G A30P24 A30P24G A20P16 A20P16G A20P20 A20P20G A24P20 A24P20G A24P24 A24P24G A30P24 A30P24G A36P30 A36P30G A36P36 A36P36G A48P36 A48P36G A60P36 A60P36G A24P20 A24P20G A24P24 A24P24G A30P24 A30P24G A48P36 A48P36G A60P36 A60P36G A20P16 A20P16G A20P20 A20P20G A24P20 A24P20G A24P24 A24P24G A30P24 A30P24G A36P30 A36P30G A48P36 A48P36G A24P20 A24P20G A24P24 A24P24G A30P24 A30P24G Panel Size in./mm 17.00 x 13.00 432 x 330 17.00 x 17.00 432 x 432 21.00 x 17.00 533 x 432 27.00 x 21.00 686 x 533 17.00 x 13.00 432 x 330 17.00 x 17.00 432 x 432 21.00 x 17.00 533 x 432 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 33.00 x 27.00 838 x 686 17.00 x 13.00 432 x 330 17.00 x 17.00 432 x 432 21.00 x 17.00 533 x 432 27.00 x 21.00 686 x 533 17.00 x 13.00 432 x 330 17.00 x 17.00 432 x 432 21.00 x 17.00 533 x 432 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 33.00 x 27.00 838 x 686 33.00 x 33.00 838 x 838 45.00 x 33.00 1143 x 838 57.00 x 33.00 1448 x 838 21.00 x 17.00 533 x 432 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 45.00 x 33.00 1143 x 838 57.00 x 33.00 1448 x 838 17.00 x 13.00 432 x 330 17.00 x 17.00 432 x 432 21.00 x 17.00 533 x 432 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 33.00 x 27.00 838 x 686 45.00 x 33.00 1143 x 838 21.00 x 17.00 533 x 432 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 Mtg G x H in./mm 21.81 x 10.00 554 x 254 21.81 x 14.00 554 x 356 25.86 x 14.00 657 x 356 31.95 x 18.00 812 x 457 21.81 x 10.00 554 x 254 21.81 x 14.00 554 x 356 25.86 x 14.00 657 x 356 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 37.61 x 24.00 955 x 610 21.81 x 10.00 554 x 254 21.81 x 14.00 554 x 356 25.86 x 14.00 657 x 356 31.95 x 18.00 812 x 457 21.81 x 10.00 554 x 254 21.81 x 14.00 554 x 356 25.86 x 14.00 657 x 356 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 37.58 x 24.00 955 x 610 37.61 x 30.00 955 x 762 49.58 x 30.00 1259 x 762 61.41 x 30.00 1564 x 762 25.86 x 14.00 657 x 356 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 49.58 x 30.00 1259 x 762 61.41 x 30.00 1566 x 762 21.81 x 10.00 554 x 254 21.81 x 14.00 554 x 356 25.86 x 14.00 657 x 356 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 37.61 x 24.00 958 x 610 49.58 x 30.00 1263 x 762 25.86 x 14.00 657 x 356 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 No. of Latches 4 4 4 5 4 4 4 4 5 5 4 4 4 5 4 4 4 4 5 5 7 8 8 4 4 5 8 8 4 4 4 4 5 5 8 4 4 5 Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. 270 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 271 Fiberglass Hinge-Cover with 3-Point Latch or Quick-Release Latches 3 Fiberglass Hinge-Cover with 3-Point Latch or Quick-Release Latches 272 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Notes 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 273 Fiberglass Hinge-Cover with 3-Point Latch or Quick-Release Latches 3 Fiberglass Wall-Mount Disconnect Fiberglass Disconnect, Type 4X Wall-Mount Disconnect SPECIFICATIONS • • • • • • • • • • • •  iberglass-reinforced material has excellent temperature and F chemical resistance qualities and exhibits outstanding physical properties S eams are sealed; no holes or knockouts Gasket assures water-tight and dust-tight seal Fiberglass material is easily drilled, filed or sawed Hinges are fiberglass-reinforced polyester Doors are secured with Type 304 stainless steel slotted quarterturn latches Data pocket is high-impact thermoplastic Copper flashed steel collar studs for mounting optional panels and terminal block kits Holes provided in body for mounting disconnect operating handle and operating mechanism Internal grounding provisions for quarter-turn latches Includes bracket affixed to door for attaching disconnect door catch (interlock) and instructions for installing disconnects Material is halogen free FINISH Standard fiberglass material is light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. INDUSTRY STANDARDS ACCESSORIES UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No. 94; Type 3, 3R, 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requirements See also Accessories. Frameless Window Kit Panels for Type 3R, 4, 4X, 12 and 13 Enclosures Steel and Stainless Steel Window Kits Terminal Block Kit Assembly for Type 4, 12 and 13 Enclosures MODIFICATION AND CUSTOMIZATION APPLICATION For effective and economical disconnect protection in the harshest corrosive environments, these enclosures provide secure door closure through the use of Type 304 stainless steel slotted quarterturn latches. Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17WD Standard Product  Catalog Number A20HS1610GQRLP A24HS2008GQRLP A24HS2408GQRLP A24HS2412GQRLP A30HS2412GQRLP A36HS3012GQRLP A48HS3612GQRLP A60HS3612GQRLP AxBxC in./mm 20.19 x 16.25 x 10.00 513 x 413 x 254 24.25 x 20.25 x 8.00 616 x 514 x 203 24.19 x 24.19 x 8.00 614 x 614 x 203 24.19 x 24.19 x 12.00 614 x 614 x 305 30.25 x 24.25 x 12.00 768 x 616 x 305 36.25 x 30.25 x 12.00 921 x 768 x 305 48.25 x 36.25 x 12.00 1226 x 921 x 305 60.25 x 36.31 x 12.00 1530 x 922 x 305 Panel A20P16 Conductive Panel A20P16G A24P20 A24P20G A24P24 A24P24G A24P24 A24P24G A30P24 A30P24G A36P30 A36P30G A48P36 A48P36G A60P36 A60P36G Panel Size in./mm 17.00 x 13.00 432 x 330 21.00 x 17.00 533 x 432 21.00 x 21.00 533 x 533 21.00 x 21.00 533 x 533 27.00 x 21.00 686 x 533 33.00 x 27.00 838 x 686 45.00 x 33.00 1143 x 838 57.00 x 33.00 1448 x 838 Mounting G x H in./mm 21.81 x 10.00 554 x 254 25.86 x 14.00 657 x 356 25.81 x 18.00 656 x 457 25.81 x 18.00 656 x 457 31.95 x 18.00 812 x 457 37.58 x 24.00 955 x 610 49.58 x 30.00 1259 x 762 61.58 x 30.00 1564 x 762 Number of Latches 2 2 2 2 2 4 5 5 Purchase panels separately. Optional stainless steel, composite and aluminum panels available for most sizes. See General Accessories. No additional “C” dimensions available. 274 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 275 Fiberglass Wall-Mount Disconnect 3 Fiberglass Wall-Mount Disconnect 276 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Disconnect Mounting Space Disconnects will occupy space on panel shown in Disconnect Mounting Space Diagram. Wiring space W1 is available when disconnect is installed in the enclosure. E1 = 8.62 in. (219 mm) when A < 30.00 in. (768 mm) and C = 8.00 in. (203 mm), 10.00 in. (254 mm) or 12.00 in. (305 mm) E1 = 11.62 in. (295 mm) when A > 30.00 in. (768 mm) and C = 12.00 in. (305 mm) W1 = Wiring Space. See Technical Information for wire bend space. Refer to National Electrical Code® 2005 article 430-10(b) for wiring space required for line side conductors to be connected to disconnect. Verify your application to determine whether wiring space is adequate. Consult disconnect manufacturer for F1 and G1 dimensions. 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 277 Fiberglass Wall-Mount Disconnect 3 Fiberglass Hazardous Location ZONEX Non-Metallic Terminal Enclosure Hazardous Location APPLICATION ZONEX Non-Metallic Terminal Enclosure is ideal for field terminations in hazardous locations. The enclosure meets national and international standards and certifications. It can be used to protect equipment and terminations from corrosive contaminants while meeting rigorous demands. The cabinet is ideal for either panel- or din-mounted components. The enclosures meets ATEX Directives 94/9/EC and IECEx standards for increased safety in housing electrical components in Zone 1 and Zone 2 applications. FEATURES • • INDUSTRY STANDARDS • ATEX Directive 94/9/EC ATEX TUV 13 ATEX120808U Ex e IIC Gb Ex ta IIIC Da IP66 EN60079-0 EN60079-7 EN60079-31 Service temperature -50C to +100C • • • • SPECIFICATIONS IECEx IECEx TUV 13.0001U Ex e IIC Gb Ex ta IIIC Da IP66 IEC 60079-0 IEC 60079-7 IEC 60079-31 Service temperature -50C to +100C • • • • Type 4, 4X, 12; File No. E61997 UL508A Listed cUL Listed per CSA C22.2 No. 94; Type 4, 4X, 12; File No. E61997 NEMA / EEMAC Type 4, 4X, 12 IEC 60529, IP66 Compression-molded, high-impact strength, fiberglass body and cover Cover includes recessed, retained, combination head (Straight blade, Phillips and Torx drive) M4 or M6 stainless steel Type 316 screws Retained, continuous, high-temperature silicon gasket within a labyrinth seal between cover and body Durable and reusable, internal M4 or M6 stainless steel inserts for DIN- and Panel-mounting Covered mounting screw provisions outside of gasketed area, sized M4 (#8) or M6 (¼-in.) Mounting location dimensions are molded into the back side of the enclosure P anel mounting screws included, M4 or M6 Compression-molded fiberglass with added agents to address static charge build-up High-impact strength as well as high temperature-rated Increased Safety: Ex e applications Optional panels are pre-plated steel, 1.5mm (16 ga.) thick; or 2mm composite FINISH • • Molded material has a smooth, low-gloss, black finish Cover screws are matte stainless steel finish ACCESSORIES Panels Din Rail Terminals NOTES Intrinsically safe terminal blocks can be installed through modification program to provide a populated enclosure. IECEx populated enclosures require IECEx certified components specifically listed in the approving Certification (see IECEx SIR 09.0100 for more detail). MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Hoffman offers a ZONEX-specific modification program. Contact your local Hoffman Representative or Distributor for more information. Bulletin: HL3 278 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product   Catalog Number EXE807555 EXE1107555 EXE1607555 EXE1907555 EXE807575 EXE1107575 EXE1607575 EXE1907575 EXE12212090 EXE22012090 EXE16016090 EXE26016090 EXE36016090 EXE56016090 EXE255250120 EXE400250120 EXE400405120 EXE400405165 F in./mm .17 4 .17 4 .17 4 .17 4 .16 4 .16 4 .16 4 .16 4 .17 4 .17 4 .23 5.9 .23 5.9 .23 5.9 .21 5 .22 6 .22 6 .23 6 .20 5 AxBxC in./mm 3.15 x 2.95 x 2.17 80 x 75 x 55 4.33 x 2.95 x 2.17 110 x 75 x 55 6.30 x 2.95 x 2.17 160 x 75 x 55 7.48 x 2.95 x 2.17 190 x 75 x 55 3.15 x 2.95 x 2.95 80 x 75 x 75 4.33 x 2.95 x 2.95 110 x 75 x 75 6.30 x 2.95 x 2.95 160 x 75 x 75 7.48 x 2.95 x 2.95 190 x 75 x 75 4.80 x 4.72 x 3.54 122 x 120 x 90 8.66 x 4.72 x 3.54 220 x 120 x 90 6.30 x 6.30 x 3.54 160 x 160 x 90 10.24 x 6.30 x 3.54 260 x 160 x 90 14.17 x 6.30 x 3.54 360 x 160 x 90 22.05 x 6.30 x 3.54 560 x 160 x 90 10.04 x 9.84 x 4.72 255 x 250 x 120 15.75 x 9.84 x 4.72 400 x 250 x 120 15.75 x 15.94 x 4.72 400 x 405 x 120 15.75 x 15.94 x 6.50 400 x 405 x 165 G in./mm .57 15 .57 15 .57 15 .57 15 .56 14 .56 14 .56 14 .56 14 .75 19 .75 19 .79 20 .79 20 .79 20 .77 20 .79 20 .79 20 .79 20 .76 19 H in./mm .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .98 25 .98 25 .83 21 .83 21 .83 21 .83 21 .98 25 .98 25 .98 25 .98 25 I in./mm 1.65 42 1.65 42 1.65 42 1.65 42 2.44 62 2.44 62 2.44 62 2.44 62 2.91 74 2.95 75 2.95 75 2.95 75 2.95 75 2.95 .75 4.09 104 4.09 104 4.09 104 5.87 149 J in./mm .23 6 .24 6 .24 6 .23 6 .23 6 .24 6 .24 6 .24 6 .32 8 .32 8 .39 10 .39 10 .39 10 .39 10 .39 10 .39 10 .39 10 .39 10 Mounting Screw Size in./mm #8 4 #8 4 #8 4 #8 4 #8 4 #8 4 #8 4 #8 4 1/4 6 1/4 6 1/4 6 1/4 6 1/4 6 1/4 6 1/4 6 1/4 6 1/4 6 1/4 6 Panel A8075P Panel Material Composite A11075P Composite A16075P Composite A19075P Composite A8075P Composite A11075P Composite A16075P Composite A19075P Composite A122120P Plated Steel A220120P Plated Steel A160160P Plated Steel A260160P Plated Steel A360160P Plated Steel A560160P Plated Steel A255250P Plated Steel A400250P Plated Steel A400405P Plated Steel A400405P Plated Steel Panel Size in./mm 2.72 x 2.52 x .08 69 x 64 x 2 3.90 x 2.52 x .08 99 x 64 x 2 5.87 x 2.52 x .08 149 x 64 x 2 7.05 x 2.52 x .08 179 x 64 x 2 2.72 x 2.52 x .08 69 x 64 x 2 3.90 x 2.52 x .08 99 x 64 x 2 5.87 x 2.52 x .08 149 x 64 x 2 7.05 x 2.52 x .08 179 x 64 x 2 4.25 x 4.21 x .06 108 x 107 x 1.5 8.11 x 4.21 x .06 206 x 107 x 1.5 5.63 x 5.70 x .06 143 x 144 x 1.5 9.61 x 5.70 x .06 244 x 144 x 1.5 13.54 x 5.70 x .06 344 x 144 x 1.5 21.38 x 5.70 x .06 543 x 144 x 2.5 9.45 x 9.17 x .06 240 x 233 x 1.5 15.12 x 9.17 x .06 384 x 233 x 1.5 15.16 x 15.35 x .06 385 x 390 x 1.5 15.16 x 15.35 x .06 385 x 390 x 1.5 3 * ) %) $* == % & + = / %/ - $ $- , = EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com  Non-Metallic 279 Fiberglass Hazardous Location 3 Fiberglass Free-Stand Free-Stand, Type 4X Free-Stand SPECIFICATIONS • • • • • • • • • • • • •  iberglass-reinforced polyester material has excellent F temperature and chemical resistance and exhibits outstanding physical properties Fiberglass material is easily punched, drilled, filed or sawed Models have either a 3-point latching system with handle or stainless steel captivated door screws Gasket assures water-tight and dust-tight seal P ainted steel top, bottom and side internal reinforcements standard; stainless steel corner reinforcements optional Heavy-duty Type 316 stainless steel lifting eyes Accessory mounting channels attached horizontally to interior body sides at top, bottom and center. Painted mounting channels standard; stainless steel optional. P anels and rack-mounting angles can be mounted anywhere along corner channels; panels can be mounted on sides or back Hinges are corrosion-resistant fiberglass with Type 316 stainless steel hinge pins L arge, high-impact thermoplastic data pocket (12.00 x 12.00 in. or 305 x 305 mm) is provided Molded-in angular sealing flange directs water away from gasket area Type 316 stainless steel POWERGLIDE Handle on handle versions Material is halogen free FINISH Standard fiberglass enclosure is gray inside and out. Optional mild-steel panels are painted white. Optional conductive panels are available. INDUSTRY STANDARDS ACCESSORIES UL 508A Listed; Type 3, 3R, 4, 4X, 12; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA Type 3, 3R, 4, 4X, 12, 13 E.I.A. RS-310-D IEC 60529, IP66 Meets NEMA Type 3RX requirements See also Accessories. Accessory Selection for Free-Stand, Type 4X Floor Stand Kit H2OMIT Vent Drains, Type 4X H2OMIT Thermoelectric Dehumidifier HOL-SEALERS Non-Metallic Hole Seals MODIFICATION AND CUSTOMIZATION APPLICATION An economical housing for corrosive environments, single-door, free-stand enclosures provide a versatile solution for applications that require flexibility when mounting panels and racks. Benefits include easy access to equipment, larger capacity for control systems, steel reinforcements for stability and strength, captivated door screws and an optional POWERGLIDE Handle for secure latching. Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17 Standard Product  Catalog Number A722525FGFS A722525FGFS3PT 280 AxBxC in. 72.00 x 25.00 x 24.50 72.00 x 25.00 x 24.50 Non-Metallic AxBxC mm 1829 x 635 x 622 1829 x 635 x 622 Description Stainless steel captivated door screws 3-point latching system/Type 316 stainless steel handle SUBJECT TO CHANGE WITHOUT NOTICE Estimated Ship Wt. (lb.) 215 215 Estimated Ship Wt. (kg) 97.5 97.5 EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 281 Fiberglass Free-Stand 3 Fiberglass Free-Stand Accessory Selection for Free-Stand, Type 4X For details, see Accessories chapter. Catalog Number A72SMP14G Bulletin: A17Y, A80, D10, PNL30, PNLFS A72SMP20G  Panels Catalog Number A72P24F1 A72P24F2 A72P24F1G A72P24F2G Description Full Panel, Steel Half Panel, Steel Full Panel, Conductive Half Panel, Conductive Size (in.) 60.00 x 20.00 30.88 x 20.00 60.00 x 20.00 30.88 x 20.00 Size (mm) 1524 x 508 784 x 508 1524 x 508 784 x 508 Purchase panels and accessories separately. Description Full Swing-Out Panel Half Swing-Out Panel Size (in.) 60.00 x 18.19 30.88 x 18.19 Size (mm) 1524 x 462 784 x 462 Description Set of four casters Catalog Number DMCKC Size (in.) 4.00 x 3.00 Size (mm) 102 x 76  Inside Bottom Support  Side-Mounted Panels Non-Metallic Package Qty 20 20  Casters Purchase panels and accessories separately. 282 1524 x 508 Description 1/4-20 Clamping Nut 5/16-18 Clamping Nut Catalog Number APS1420CN APS51618CN Requires Bottom Support A72SMP20 60.00 x 20.00  Clamping Nuts Half Swing-Out Panel fits in top or bottom half of enclosure. Description 14.00 inch (356mm) Wide Panel, Steel 20.00 inch (508mm) Wide Panel, Steel Size (mm) 1524 x 356 Purchase panels and accessories separately. Purchase panels and accessories separately. Catalog Number A72SMP14 Size (in.) 60.00 x 14.00 Purchase panels and accessories separately.  Swing-Out Panels Catalog Number A72SP24F3 A72SP24F4 Description 14.00 inch (356mm) Wide Panel, Conductive 20.00 inch (508mm) Wide Panel, Conductive Description Enclosure bottom support allows installation of casters or floor-stand kits. Size (in.) 60.00 x 14.00 Size (mm) 1524 x 356 Catalog Number A17SUPPORT1 60.00 x 20.00 1524 x 508 Purchase panels and accessories separately. SUBJECT TO CHANGE WITHOUT NOTICE Size (in.) 23.70 x 23.25 Size (mm) 602 x 591 EQUIPMENT PROTECTION Rack Mounting Accessory Selection for FreeStand, Type 4X For details, see Accessories chapter.  Screw Package Catalog Number AS1032 Description 10-32 Truss Head Nickel-Plated Package Qty 20 Purchase accessories separately. Bulletin: A80, P20  Rack Mounting Angles Description Two Full-Length Angles (Type RP) Two Half-Length Angles (Type RP) Two Full-Length Angles (Type RA) Two Full-Length Angles (Type RA Catalog Number A72RP24F5 A72RP24F6 A60RA19TH A72RA19TH Length (in.) 61.25 31.50 49.00 61.25 Length (mm) 1556 800 1245 1556 Units 35 18 28 35 Purchase accessories separately.  Drawers Catalog Number A19DR2U A19DR4U Description Pull-Out Drawer Pull-Out Drawer Depth (in.) 3.47 6.97 Depth (mm) 88 177 Units 2 4 Purchase accessories separately. 1 unit = 1.75 in. (44 mm) Requires two sets of Type RA Rack Mounting Angles for installation. 1 unit = 1.75 in. (44mm)  Clip Nut Package Catalog Number AN1032 Description #10-32 Zinc-Plated Package Qty 20 Size Fits U-Style (Type RA) Rack Mounting Angle  Rack Panels Catalog Number P19RP1UA P19RP1UP P19RP2UA P19RP2UP P19RP3UA P19RP3UP P19RP4UA P19RP4UP P19RP5UA P19RP5UP P19RP6UA P19RP6UP P19RP7UA P19RP7UP P19RP8UA P19RP8UP P19RP9UP P19RP10UP P19RP11UA P19RP11UP P19RP12UA P19RP12UP P19RP16UP Description Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Aluminum Steel Steel Steel Aluminum Steel Aluminum Steel Steel  Writing Surface for Drawers Catalog Number A19WSDR Purchase accessories separately. Size (in.) 19.00 x 1.75 19.00 x 1.75 19.00 x 3.50 19.00 x 3.50 19.00 x 5.25 19.00 x 5.25 19.00 x 7.00 19.00 x 7.00 19.00 x 8.75 19.00 x 8.75 19.00 x 10.50 19.00 x 10.50 19.00 x 12.25 19.00 x 12.25 19.00 x 14.00 19.00 x 14.00 19.00 x 15.75 19.00 x 17.50 19.00 x 19.25 19.00 x 19.25 19.00 x 21.00 19.00 x 21.00 19.00 x 28.00 Size (mm) 483 x 44 483 x 44 483 x 89 483 x 89 483 x 133 483 x 133 483 x 178 483 x 178 483 x 222 483 x 222 483 x 267 483 x 267 483 x 311 483 x 311 483 x 356 483 x 356 483 x 400 483 x 445 483 x 489 483 x 489 483 x 533 483 x 533 483 x 711 Units 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 10 11 11 12 12 16 Description Hinged Surface Size Fits Drawer A19DR2U and A19DR4U Purchase accessories separately.  Shelves Catalog Number A19SHP6 A19SH5 A19SH6 Description Pull-Out Shelf Fixed Shelf Fixed Shelf Units 2 1 1 3 Purchase accessories separately. 1 unit = 1.75 in. (44 mm)  Guides Catalog Number AG1U6 Description Chassis Guide (set of two) Unit 1 Purchase accessories separately. 1 unit = 1.75 in. (44 mm) Purchase panels and accessories separately. 1 unit = 1.75 in. (44 mm) EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 283 Fiberglass Free-Stand 3 Fiberglass Two-Door Free-Stand Two-Door Free-Stand, Type 4X Two-Door Free-Stand INDUSTRY STANDARDS UL 508A Listed; Type 3, 3R, 4, 4X, 12; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 3, 3R, 4, 4X, 12; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA Type 3, 3R, 4, 4X, 12, 13 IEC 60529, IP66 Meets NEMA Type 3RX requiremets SPECIFICATIONS • • • • • • FINISH An economical way to house electronics in corrosive environments, two-door enclosures provide easy access to equipment, larger capacity for control systems and steel reinforcements that ensure stability and strength. These enclosures feature captivated door screws and an optional POWERGLIDE Handle for secure latching. • • • • • APPLICATION •  eavy-duty Type 316 stainless steel lifting eyes H Hinges are corrosion-resistant fiberglass with Type 316 stainless steel hinge pins L arge data pocket (12.00 x 12.00 in. or 305 x 305 mm) is highimpact thermoplastic Molded-in angular sealing flange directs water away from gasket area Material is halogen free • •  iberglass-reinforced polyester material has excellent F temperature and chemical resistance and exhibits outstanding physical properties S eams are sealed; no holes or knockouts Fiberglass material is easily punched, drilled, filed or sawed Models have either a 3-point latching system with handle or stainless steel captivated door screws Type 316 stainless steel POWERGLIDE Handle on handle versions Stainless steel captivated door screws on screw versions Gasket assures a water-tight and dust-tight seal P ainted steel top, bottom and side internal reinforcements standard; stainless steel corner reinforcements optional S olid centerpost (not removable) has heavy-gauge stiffener Standard fiberglass enclosure is gray inside and out. White painted mild steel panels are included. Optional conductive panels are available. ACCESSORIES See also Accessories. Accessory Selection for Free-Stand, Type 4X Bottom Support Kits Floor Stand Kit H2OMIT Vent Drains, Type 4X H2OMIT Thermoelectric Dehumidifier HOL-SEALERS Non-Metallic Hole Seals MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17 Standard Product  Catalog Number A724925FG A724925FGFS3PT 284 Non-Metallic AxBxC in./mm 72.00 x 49.00 x 24.50 1829 x 1245 x 622 72.00 x 49.00 x 24.50 1829 x 1245 x 622 Number of Panels 2 2 SUBJECT TO CHANGE WITHOUT NOTICE Panel Size in./mm 56.00 x 22.00 1422 x 559 56.00 x 22.00 1422 x 559 EQUIPMENT PROTECTION 3 Bottom Support Kits Bulletin: A17Y Catalog Number A17SUPPORT2 A17UNISTRUT Description Inside Bottom Support -- Enclosure bottom support to allow option of installing casters or floor stand kits Bolt-On Unistrut Channel (8 channels) -- Painted steel unistrut for accessory mounting A17SUPPORT2 required to install A17UNISTRUT in two-door enclosures EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 285 Fiberglass Two-Door Free-Stand 3 Polycarbonate and ABS QLINE D Polycarbonate and ABS QLINE D QLINE D Pushbutton, Type 4X APPLICATION Used for insulating and housing 30.5-mm or 22.5-mm pushbuttons in hostile environments, QLINE D Enclosures have contoured bodies with flush cover screws for an attractive, contemporary appearance. SPECIFICATIONS • • • • • • • • • • •  igh-impact polycarbonate material is used for both body and H cover Polycarbonate material is easily punched, drilled, filed or sawed Straight side walls permit ganging of multiple enclosures Cross-point captivated cover screws are stainless steel Mounting holes molded directly adjacent to cover screws Cover screws protected by removable caps that are both aesthetic and provide tamper resistance Molded internal pads for mounting optional panels, rails or other components S eamless foam-in-place gasket assures water-tight and dusttight seal S crews provided for mounting optional panel Mounting hardware furnished Material is halogen free FINISH Polycarbonate enclosure material is RAL 7035 light-gray inside and out. Optional panels are unpainted plated steel. INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 12 CSA File Number 42186: Type 4, 4X, 12 IEC 60529, IP67 ACCESSORIES See also Accessories. Hardware Kit Hinge Kit Mounting Bracket Kit Bulletin: Q41 Standard Product  Catalog Number Q1PBPCD Q1PBPCDM Q2PBPCD Q2PBPCDM Q3PBPCD Q3PBPCDM Q4PBPCD Q4PBPCDM Q6PBPCD AxBxC mm/in. 75 x 73 x 79 2.95 x 2.87 x 3.11 75 x 73 x 79 2.95 x 2.87 x 3.11 113 x 73 x 79 4.45 x 2.87 x 3.11 113 x 73 x 79 4.45 x 2.87 x 3.11 153 x 73 x 79 6.02 x 2.87 x 3.11 153 x 73 x 79 6.02 x 2.87 x 3.11 193 x 113 x 79 7.60 x 4.45 x 3.11 193 x 113 x 79 7.60 x 4.45 x 3.11 233 x 153 x 84 9.17 x 6.02 x 3.29 Hole Size mm/in. 30.5 22.5 30.5 22.5 30.5 22.5 30.5 22.5 30.5 External Dimensions LxW mm/in. 82 x 80 3.23 x 3.15 82 x 80 3.23 x 3.15 120 x 80 4.72 x 3.15 120 x 80 4.72 x 3.15 160 x 80 6.30 x 3.15 160 x 80 6.30 x 3.15 200 x 120 7.87 x 4.72 200 x 120 7.87 x 4.72 240 x 160 9.45 x 6.30 Panel Q88PD Q88PD Q128PD Q128PD Q168PD Q168PD Q2012PD Q2012PD Q2416PD Panel Size DxE mm/in. 68 x 55 2.68 x 2.17 68 x 55 2.68 x 2.17 91 x 65 3.58 x 2.56 91 x 65 3.58 x 2.56 131 x 65 5.16 x 2.56 131 x 65 5.16 x 2.56 170 x 100 6.69 x 3.94 170 x 100 6.69 x 3.94 211 x 148 8.31 x 5.83 Mounting GxH mm/in. 70 x 50 2.76 x 1.97 70 x 50 2.76 x 1.97 108 x 50 4.25 x 1.97 108 x 50 4.25 x 1.97 148 x 50 5.83 x 1.97 148 x 50 5.83 x 1.97 188 x 90 7.40 x 3.54 188 x 90 7.40 x 3.54 228 x 130 8.98 x 5.12 F mm/in. 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 78 3.07 J mm/in. 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 75 2.95 P mm/in. 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 90 3.54 90 3.54 138 5.43 Q mm/in. 44 1.73 44 1.73 82 3.22 82 3.22 122 4.80 122 4.80 160 6.30 160 6.30 202 7.95 R mm/in. — — — — — — — — — — — — 40 1.57 40 1.57 75 2.95 S mm/in. 58 2.28 58 2.28 96 3.78 96 3.78 136 5.35 136 5.35 176 6.93 176 6.93 215 8.46 U mm/in. 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 4 0.16 X mm/in. 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 60 2.36 60 2.36 48 1.89 Y mm/in. 41 1.61 41 1.61 36 1.42 36 1.42 32 1.26 32 1.26 28 1.10 28 1.10 56 2.20 Z mm/in. — — — — 48 1.89 48 1.89 48 1.89 48 1.89 48 1.89 48 1.89 64 2.52 A x B x C are internal dimensions. Purchase panels separately. 286 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 287 Polycarbonate and ABS QLINE D 3 Polycarbonate and ABS QLINE D QLINE D, Type 4X APPLICATION QLINE D polycarbonate and ABS enclosures have contoured bodies with flush cover screws for an attractive, contemporary appearance. Tough as well as stylish, they are functional in corrosive environments and can withstand occasional submersion. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-UL rated alternative. SPECIFICATIONS • • • • • • • • • • • • INDUSTRY STANDARDS FINISH Polycarbonate Enclosure UL 508A Listed; Type 4, 4X, 6, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 6, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 6, 12, 13 CSA File No. 42186: Type 4, 4X, 6, 12, 13 IEC 60529, IP67 ABS Enclosure NEMA/EEMAC Type 4, 4X, 6, 12, 13 IEC 60529, IP67  ody is impact-resistant polycarbonate for PCD series and ABS B for ABD series Opaque and clear covers are impact-resistant polycarbonate for PCD series and ABS for ABD series Polycarbonate material is easily punched, drilled, filed or sawed Straight side walls permit ganging of multiple enclosures Cross-point captivated cover screws are stainless steel Mounting holes molded directly adjacent to cover screws Cover screws protected by removable caps that are aesthetic and provide tamper resistance Molded internal pads for mounting optional panels, rails and other components P anel mounting feature on both body and cover S eamless foam-in-place gasket assures water-tight and dusttight seal S crews provided for mounting optional panel Material is halogen free Polycarbonate and ABS enclosures are light-gray (RAL 7035) inside and out. Optional panels are plated steel. ACCESSORIES See also Accessories. Hardware Kit Hinge Kit HOL-SEALERS Non-Metallic Hole Seals Mounting Bracket Kit MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: Q41 288 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Polycarbonate Catalog Number Q554PCD Q554PCDCC Q886PCD Q886PCDCC Q1286PCD Q1286PCDCC Q1686PCD Q1686PCDCC Q12126PCD Q12126PCDCC Q20158PCD Q20158PCDCC Q889PCD Q889PCDCC Q1289PCD Q1289PCDCC Q1689PCD Q1689PCDCC Q12129PCD Q12129PCDCC Q20129PCD Q20129PCDCC Q30239PCD Q30239PCDCC Q16129PCD Q16129PCDCC Q24169PCD Q24169PCDCC Q302311PCD Q302311PCDCC Q241612PCD Q241612PCDCC AxBxC mm/in. 53 x 55 x 36 2.09 x 2.17 x 1.42 53 x 55 x 36 2.09 x 2.17 x 1.42 76 x 74 x 49 2.97 x 2.89 x 1.93 76 x 74 x 49 2.97 x 2.89 x 1.93 114 x 74 x 49 4.47 x 2.89 x 1.93 114 x 74 x 49 4.47 x 2.89 x 1.93 154 x 74 x 49 6.04 x 2.89 x 1.93 154 x 74 x 49 6.04 x 2.89 x 1.93 120 x 122 x 56 4.72 x 4.80 x 2.20 120 x 122 x 56 4.72 x 4.80 x 2.20 150 x 200 x 76 5.91 x 7.87 x 2.99 150 x 200 x 76 5.91 x 7.87 x 2.99 80 x 82 x 86 3.15 x 3.23 x 3.39 80 x 82 x 86 3.15 x 3.23 x 3.39 113 x 73 x 79 4.45 x 2.87 x 3.11 113 x 73 x 79 4.45 x 2.87 x 3.11 113 x 73 x 79 4.45 x 2.87 x 3.11 113 x 73 x 79 4.45 x 2.87 x 3.11 120 x 122 x 86 4.72 x 4.80 x 3.39 120 x 122 x 86 4.72 x 4.80 x 3.39 193 x 113 x 79 7.60 x 4.45 x 3.11 193 x 113 x 79 7.60 x 4.45 x 3.11 293 x 223 x 79 11.54 x 8.78 x 3.11 230 x 300 x 86 9.06 x 11.81 x 3.39 153 x 113 x 84 6.02 x 4.45 x 3.29 153 x 113 x 84 6.02 x 4.45 x 3.29 233 x 153 x 84 9.17 x 6.02 x 3.29 233 x 153 x 84 9.17 x 6.02 x 3.29 230 x 300 x 111 9.06 x 11.81 x 4.37 230 x 300 x 111 9.06 x 11.81 x 4.37 160 x 240 x 121 6.30 x 9.45 x 4.76 160 x 240 x 121 6.30 x 9.45 x 4.76 Cover Style Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear External Dimensions LxW mm/in. 55 x 53 2.17 x 2.09 55 x 53 2.17 x 2.09 82 x 80 3.23 x 3.15 82 x 80 3.23 x 3.15 120 x 80 4.72 x 3.15 120 x 80 4.72 x 3.15 160 x 80 6.30 x 3.15 160 x 80 6.30 x 3.15 122 x 120 4.80 x 4.72 122 x 120 4.80 x 4.72 200 x 150 7.87 x 5.91 200 x 150 7.87 x 5.91 82 x 80 3.23 x 3.15 82 x 80 3.23 x 3.15 120 x 80 4.72 x 3.15 120 x 80 4.72 x 3.15 160 x 80 6.30 x 3.15 160 x 80 6.30 x 3.15 122 x 120 4.80 x 4.72 122 x 120 4.80 x 4.72 200 x 120 7.87 x 4.72 200 x 120 7.87 x 4.72 300 x 230 11.81 x 9.05 300 x 230 11.81 x 9.05 160 x 120 6.30 x 4.72 160 x 120 6.30 x 4.72 240 x 160 9.45 x 6.30 240 x 160 9.45 x 6.30 300 x 230 11.81 x 9.06 300 x 230 11.81 x 9.06 240 x 160 9.45 x 6.30 240 x 160 9.45 x 6.30 Panel — — Q88PD Q88PD Q128PD Q128PD Q168PD Q168PD Q1212PD Q1212PD Q2015PD Q2015PD Q88PD Q88PD Q128PD Q128PD Q168PD Q168PD Q1212PD Q1212PD Q2012PD Q2012PD Q3023PD Q3023PD Q1612PD Q1612PD Q2416PD Q2416PD Q3023PD Q3023PD Q2416PD Q2416PD Panel Size DxE mm/in. — — — — 68 x 55 2.68 x 2.17 68 x 55 2.68 x 2.17 91 x 65 3.58 x 2.56 91 x 65 3.58 x 2.56 131 x 65 5.16 x 2.56 131 x 65 5.16 x 2.56 105 x 93 4.13 x 3.66 105 x 93 4.13 x 3.66 170 x 128 6.69 x 5.04 170 x 128 6.69 x 5.04 68 x 55 2.68 x 2.17 68 x 55 2.68 x 2.17 91 x 65 3.58 x 2.56 91 x 65 3.58 x 2.56 131 x 65 5.16 x 2.56 131 x 65 5.16 x 2.56 105 x 93 4.13 x 3.66 105 x 93 4.13 x 3.66 170 x 100 6.69 x 3.94 170 x 100 6.69 x 3.94 265 x 210 10.43 x 8.27 265 x 210 10.43 x 8.27 130 x 100 5.12 x 3.94 130 x 100 5.12 x 3.94 211 x 148 8.31 x 5.83 211 x 148 8.31 x 5.83 265 x 210 10.43 x 8.27 265 x 210 10.43 x 8.27 211 x 148 8.31 x 5.83 211 x 148 8.31 x 5.83 Mounting GxH mm/in. 43 x 41 1.69 x 1.61 43 x 41 1.69 x 1.61 70 x 50 2.76 x 1.97 70 x 50 2.76 x 1.97 108 x 50 4.25 x 1.97 108 x 50 4.25 x 1.97 148 x 50 5.83 x 1.97 148 x 50 5.83 x 1.97 110 x 90 4.33 x 3.54 110 x 90 4.33 x 3.54 188 x 120 7.40 x 4.72 188 x 120 7.40 x 4.72 70 x 50 2.76 x 1.97 70 x 50 2.76 x 1.97 108 x 50 4.25 x 1.97 108 x 50 4.25 x 1.97 148 x 50 5.83 x 1.97 148 x 50 5.83 x 1.97 110 x 90 4.33 x 3.54 110 x 90 4.33 x 3.54 188 x 90 7.40 x 3.54 188 x 90 7.40 x 3.54 288 x 200 11.34 x 7.87 288 x 200 11.34 x 7.87 148 x 90 5.83 x 3.54 148 x 90 5.83 x 3.54 228 x 130 8.98 x 5.12 228 x 130 8.98 x 5.12 288 x 200 11.34 x 7.87 288 x 200 11.34 x 7.87 228 x 130 8.98 x 5.12 228 x 130 8.98 x 5.12 F mm/in. 28 1.10 28 1.10 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 62 2.44 62 2.44 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 73 2.87 73 2.87 78 3.07 78 3.07 78 3.07 78 3.07 98 3.86 98 3.86 108 4.25 108 4.25 J mm/in. 25 0.98 25 0.98 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 60 2.36 60 2.36 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 55 2.17 55 2.17 60 2.36 60 2.36 75 2.95 75 2.95 55 2.17 55 2.17 75 2.95 75 2.95 K mm/in. 10 0.39 10 0.39 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 15 0.59 30 1.18 30 1.18 30 1.18 30 1.18 15 0.59 15 0.59 55 2.17 55 2.17 45 1.77 45 1.77 P mm/in. 16 0.63 16 0.63 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 98 3.86 98 3.86 118 4.65 118 4.65 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 98 3.86 98 3.86 90 3.54 90 3.54 198 7.80 198 7.80 90 3.54 90 3.54 138 5.43 138 5.43 198 7.80 198 7.80 75 2.95 75 2.95 Q mm/in. — — — — 44 1.73 44 1.73 82 3.23 82 3.23 122 4.80 122 4.80 84 3.31 84 3.31 160 6.30 160 6.30 44 1.73 44 1.73 82 3.23 82 3.23 122 4.80 122 4.80 84 3.31 84 3.31 160 6.30 160 6.30 255 10.04 255 10.04 120 4.72 120 4.72 202 7.95 202 7.95 255 10.04 255 10.04 202 7.95 202 7.95 R mm/in. — — — — — — — — — — — — — — — — — — — — 118 4.65 118 4.65 37 1.46 37 1.46 — — — — — — — — 97 3.82 97 3.82 40 1.57 40 1.57 160 6.30 160 6.30 — — — — 75 2.95 75 2.95 160 6.30 160 6.30 75 2.95 75 2.95 S mm/in. — — — — 58 2.28 58 2.28 96 3.78 96 3.78 136 5.35 136 5.35 98 3.86 98 3.86 176 6.93 176 6.93 58 2.28 58 2.28 96 3.78 96 3.78 136 5.35 136 5.35 98 3.86 98 3.86 176 6.93 176 6.93 275 10.83 275 10.83 136 5.35 136 5.35 215 8.46 215 8.46 275 10.83 275 10.83 215 8.46 215 8.46 U mm/in. 2 0.08 2 0.08 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 4 0.16 4 0.16 3 0.12 3 0.12 4 0.16 4 0.16 4 0.16 4 0.16 4 0.16 4 0.16 A x B x C are internal dimensions. Purchase panels separately. EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 289 3 Polycarbonate and ABS QLINE D 3 Polycarbonate and ABS QLINE D Standard Product  ABS Catalog Number Q554ABD Q554ABDCC Q886ABD Q886ABDCC Q1286ABD Q1286ABDCC Q1686ABD Q1686ABDCC Q12126ABD Q12126ABDCC Q20158ABD Q20158ABDCC Q889ABD Q889ABDCC Q1289ABD Q1289ABDCC Q1689ABD Q1689ABDCC Q12129ABD Q12129ABDCC Q20129ABD Q20129ABDCC Q30239ABD Q30239ABDCC Q16129ABD Q16129ABDCC Q24169ABD Q24169ABDCC Q302311ABD Q302311ABDCC Q241612ABD Q241612ABDCC 290 AxBxC mm/in. 53 x 55 x 36 2.09 x 2.17 x 1.42 53 x 55 x 36 2.09 x 2.17 x 1.42 80 x 82 x 56 3.15 x 3.23 x 2.20 80 x 82 x 56 3.15 x 3.23 x 2.20 80 x 120 x 56 3.15 x 4.72 x 2.20 80 x 120 x 56 3.15 x 4.72 x 2.20 80 x 160 x 56 3.15 x 6.30 x 2.20 80 x 160 x 56 3.15 x 6.30 x 2.20 120 x 122 x 56 4.72 x 4.80 x 2.20 120 x 122 x 56 4.72 x 4.80 x 2.20 150 x 200 x 76 5.91 x 7.87 x 2.99 150 x 200 x 76 5.91 x 7.87 x 2.99 80 x 82 x 86 3.15 x 3.23 x 3.39 80 x 82 x 86 3.15 x 3.23 x 3.39 80 x 120 x 86 3.15 x 4.72 x 3.39 80 x 120 x 86 3.15 x 4.72 x 3.39 80 x 160 x 86 3.15 x 6.30 x 3.39 80 x 160 x 86 3.15 x 6.30 x 3.39 120 x 122 x 86 4.72 x 4.80 x 3.39 120 x 122 x 86 4.72 x 4.80 x 3.39 120 x 200 x 86 4.72 x 7.87 x 3.39 120 x 200 x 86 4.72 x 7.87 x 3.39 230 x 300 x 86 9.06 x 11.81 x 3.39 230 x 300 x 86 9.06 x 11.81 x 3.39 120 x 160 x 91 4.72 x 6.30 x 3.58 120 x 160 x 91 4.72 x 6.30 x 3.58 160 x 240 x 91 6.30 x 9.45 x 3.58 233 x 153 x 84 9.17 x 6.02 x 3.31 230 x 300 x 111 9.06 x 11.81 x 4.37 230 x 300 x 111 9.06 x 11.81 x 4.37 160 x 240 x 121 6.30 x 9.45 x 4.76 160 x 240 x 121 6.30 x 9.45 x 4.76 Non-Metallic Cover Style Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear External Dimensions LxW mm/in. 55 x 53 2.17 x 2.09 55 x 53 2.17 x 2.09 82 x 80 3.23 x 3.15 82 x 80 3.23 x 3.15 120 x 80 4.72 x 3.15 120 x 80 4.72 x 3.15 160 x 80 6.30 x 3.15 160 x 80 6.30 x 3.15 122 x 120 4.80 x 4.72 122 x 120 4.80 x 4.72 200 x 150 7.87 x 5.91 200 x 150 7.87 x 5.91 82 x 80 3.23 x 3.15 82 x 80 3.23 x 3.15 120 x 80 4.72 x 3.15 120 x 80 4.72 x 3.15 160 x 80 6.30 x 3.15 160 x 80 6.30 x 3.15 122 x 120 4.80 x 4.72 122 x 120 4.80 x 4.72 200 x 120 7.87 x 4.72 200 x 120 7.87 x 4.72 300 x 230 11.81 x 9.05 300 x 230 11.81 x 9.05 160 x 120 6.30 x 4.72 160 x 120 6.30 x 4.72 240 x 160 9.45 x 6.30 240 x 160 9.45 x 6.30 300 x 230 11.81 x 9.06 300 x 230 11.81 x 9.06 240 x 160 9.45 x 6.30 240 x 160 9.45 x 6.30 Panel — — Q88PD Q88PD Q128PD Q128PD Q168PD Q168PD Q1212PD Q1212PD Q2015PD Q2015PD Q88PD Q88PD Q128PD Q128PD Q168PD Q168PD Q1212PD Q1212PD Q2012PD Q2012PD Q3023PD Q3023PD Q1612PD Q1612PD Q2416PD Q2416PD Q3023PD Q3023PD Q2416PD Q2416PD Panel Size DxE mm/in. — — — — 68 x 55 2.68 x 2.17 68 x 55 2.68 x 2.17 91 x 65 3.58 x 2.56 91 x 65 3.58 x 2.56 131 x 65 5.16 x 2.56 131 x 65 5.16 x 2.56 105 x 93 4.13 x 3.66 105 x 93 4.13 x 3.66 170 x 128 6.69 x 5.04 170 x 128 6.69 x 5.04 68 x 55 2.68 x 2.17 68 x 55 2.68 x 2.17 91 x 65 3.58 x 2.56 91 x 65 3.58 x 2.56 131 x 65 5.16 x 2.56 131 x 65 5.16 x 2.56 105 x 93 4.13 x 3.66 105 x 93 4.13 x 3.66 170 x 100 6.69 x 3.94 170 x 100 6.69 x 3.94 265 x 210 10.43 x 8.27 265 x 210 10.43 x 8.27 130 x 100 5.12 x 3.94 130 x 100 5.12 x 3.94 211 x 148 8.31 x 5.83 211 x 148 8.31 x 5.83 265 x 210 10.43 x 8.27 265 x 210 10.43 x 8.27 211 x 148 8.31 x 5.83 211 x 148 8.31 x 5.83 Mtg. GxH mm/in. 43 x 41 1.69 x 1.61 43 x 41 1.69 x 1.61 70 x 50 2.76 x 2.17 70 x 50 2.76 x 2.17 108 x 50 4.25 x 1.97 108 x 50 4.25 x 1.97 148 x 50 5.83 x 1.97 148 x 50 5.83 x 1.97 110 x 90 4.33 x 3.54 110 x 90 4.33 x 3.54 188 x 120 7.40 x 4.72 188 x 120 7.40 x 4.72 70 x 50 2.76 x 1.97 70 x 50 2.76 x 1.97 108 x 50 4.25 x 1.97 108 x 50 4.25 x 1.97 148 x 50 5.83 x 1.97 148 x 50 5.83 x 1.97 110 x 90 4.33 x 3.54 110 x 90 4.33 x 3.54 188 x 90 7.40 x 3.54 188 x 90 7.40 x 3.54 288 x 200 11.34 x 7.87 288 x 200 11.34 x 7.87 148 x 90 5.83 x 3.54 148 x 90 5.83 x 3.54 228 x 130 8.98 x 5.12 228 x 130 8.98 x 5.12 288 x 200 11.34 x 7.87 288 x 200 11.34 x 7.87 228 x 130 8.98 x 5.12 228 x 130 8.98 x 5.12 F J K P Q R S U mm/in. 28 1.10 28 1.10 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 42 1.65 62 2.44 62 2.44 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 72 2.83 73 2.87 73 2.87 78 3.07 78 3.07 78 3.07 78 3.07 98 3.86 98 3.86 108 4.25 108 4.25 mm/in. 25 .98 25 .98 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 40 1.57 60 2.36 60 2.36 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 70 2.76 55 2.17 55 2.17 60 2.36 60 2.36 75 2.95 75 2.95 55 2.17 55 2.17 75 2.95 75 2.95 mm/in. 10 .39 10 .39 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 15 .59 30 1.18 30 1.18 30 1.18 30 1.18 15 .59 15 .59 55 2.17 55 2.17 45 1.77 45 1.77 mm/in. 16 .63 16 .63 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 98 3.86 98 3.86 118 4.65 118 4.65 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 58 2.28 98 3.86 98 3.86 90 3.54 90 3.54 198 7.80 198 7.80 90 3.54 90 3.54 138 5.43 138 5.43 198 7.80 198 7.80 75 2.95 75 2.95 mm/in. — — — — 44 1.73 44 1.73 82 3.23 82 3.23 122 4.80 122 4.80 84 3.31 84 3.31 160 6.30 160 6.30 44 1.73 44 1.73 82 3.23 82 3.23 122 4.80 122 4.80 84 3.31 84 3.31 160 6.30 160 6.30 255 10.04 255 10.04 120 4.72 120 4.72 202 7.95 202 7.95 255 10.04 255 10.04 202 7.95 202 7.95 mm/in. — — — — — — — — — — — — — — — — — — — — 118 4.65 118 4.65 37 1.46 37 1.46 — — — — — — — — 97 3.82 97 3.82 40 1.67 40 1.67 160 6.30 160 6.30 — — — — 75 2.95 75 2.95 160 6.30 160 6.30 75 2.95 75 2.95 mm/in. — — — — 58 2.28 58 2.28 96 3.78 96 3.78 136 5.35 136 5.35 98 3.86 98 3.86 176 6.93 176 6.93 58 2.28 58 2.28 58 2.28 58 2.28 136 5.35 136 5.35 98 3.86 98 3.86 176 6.93 176 6.93 275 10.83 275 10.83 136 5.35 136 5.35 215 8.46 215 8.46 275 10.83 275 10.83 215 8.46 215 8.46 mm/in. 2 .08 2 .08 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 3 .12 4 .16 4 .16 3 .12 3 .12 4 .16 4 .16 4 .16 4 .16 4 .16 4 .16 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 291 Polycarbonate and ABS QLINE D 3 Polycarbonate and ABS QLINE D Hinge Kit Hinge Kit includes two polyamide hinges, eight M4 self-tapping, plated screws, eight flat washers and drilling templates. Use on all QLINE D enclosures. Hinge Kit meets Type 4 requirements. Catalog Number QDEHK Bulletin: Q41Y Mounting Bracket Kit Mounting Bracket Kit has four polycarbonate brackets and four M4 self-tapping, plated screws. Kit is field-installable. Use on all QLINE D enclosures. Maintains listed ratings for enclosure. Catalog Number QDMFK Bulletin: Q41Y Hardware Kit Hardware Kit includes six selftapping, stainless steel cover screws, four self-tapping plated panel screws and six removable plastic caps that fit over the screws to provide tamper resistance as well as a clean aesthetic appearance. This kit is offered as a replacement kit for lost or damaged hardware originally furnished with the enclosure. Catalog Number QDHK Bulletin: Q41Y Panels Catalog Number Q88PD Q128PD Q168PD Q1212PD Q1612PD Q2012PD Bulletin: Q41Y Q2015PD Q2416PD Q3023PD 292 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE Panel Size DxE mm/in. 65 x 55 2.56 x 2.17 93 x 65 3.66 x 2.56 133 x 65 5.24 x 2.56 105 x 95 4.13 x 3.74 132 x 105 5.20 x 4.13 172 x 105 6.77 x 4.13 172 x 133 6.77 x 5.24 213 x 145 8.38 x 5.71 285 x 210 11.22 x 8.27 Mounting GxH mm/in. 44 x 60 1.71 x 2.28 82 x 60 3.21 x 2.28 121 x 60 4.78 x 2.28 98 x 84 3.86 x 3.29 160 x 90 6.30 x 3.54 160 x 90 6.30 x 3.54 160 x 118 6.30 x 4.65 201 x 138 7.93 x 5.43 255 x 198 10.04 x 7.50 EQUIPMENT PROTECTION Notes 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 293 Polycarbonate and ABS QLINE D 3 Polycarbonate and ABS QLINE D QLINE D, EMC, Type 4X APPLICATION QLINE D polycarbonate EMC enclosures have contoured bodies and flush cover screws for an attractive, contemporary appearance while also providing EMC protection in corrosive environments. SPECIFICATIONS • • • • • • INDUSTRY STANDARDS • UL 508A Listed; Type 4, 4X, 12, 13 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A • •  ody is impact-resistant polycarbonate B EMC conductive coating in base and cover Gasket of silver/silicone Mounting holes molded directly under cover screws Cross-point captivated cover screws are stainless steel Mounting tracks along body side walls and bosses on cover for PC card installation Cover screws protected by removable caps that are both aesthetic and provide tamper resistance Molded internal pads for mounting optional panels, rails and other components S crews provided for mounting optional panel FINISH NEMA/EEMAC Type 4, 4X, 12, 13 IEC 60529, IP66 Enclosure material is RAL 7035 light-gray outside. Optional panels are conductive steel. Bulletin: Q41EM Standard Product  Catalog Number Q1286PCEMC Q1289PCEMC Q16129PCEMC Q1689PCEMC Q20129PCEMC Q24169PCEMC AxBxC mm/in. 120 x 80 x 55 4.72 x 3.15 x 2.17 120 x 80 x 85 4.72 x 3.15 x 3.35 160 x 120 x 90 6.30 x 4.72 x 3.54 160 x 80 x 85 6.30 x 3.15 x 3.35 200 x 120 x 85 7.87 x 4.72 x 3.35 240 x 160 x 90 9.45 x 6.30 x 3.54 External Dimensions LxW mm/in. 120 x 80 4.72 x 3.15 120 x 80 4.72 x 3.15 160 x 120 6.30 x 4.72 160 x 80 6.30 x 3.15 200 x 120 7.87 x 4.72 240 x 160 9.45 x 6.30 Internal Dimensions AxBxC mm/in. 114 x 74 x 49 4.47 x 2.89 x 1.93 113 x 73 x 79 4.45 x 2.87 x 3.11 153 x 113 x 84 6.02 x 4.45 x 3.29 153 x 73 x 79 6.02 x 2.87 x 3.11 193 x 113 x 79 7.60 x 4.45 x 3.11 233 x 153 x 84 9.17 x 6.02 x 3.29 Panel Q128PD Q128PD Q1612PD Q168PD Q2012PD Q2416PD Panel Size DxE mm/in. 91 x 65 3.58 x 2.56 91 x 65 3.58 x 2.56 130 x 100 5.12 x 3.94 131 x 65 5.16 x 2.56 170 x 100 6.69 x 3.94 211 x 148 8.31 x 5.83 Mounting GxH mm/in. 108 x 50 4.25 x 1.97 108 x 50 4.25 x 1.97 148 x 90 5.83 x 3.54 148 x 50 5.83 x 1.97 188 x 90 7.40 x 3.54 228 x 130 8.98 x 5.12 F mm/in. 42 1.65 72 2.83 77.5 3.05 72 2.83 72 2.83 77.5 3.05 J mm/in. 40 1.57 70 2.76 60 2.36 70 2.76 70 2.76 75 2.95 K mm/in. 15 0.59 15 0.59 30 1.18 15 0.59 15 0.59 15 0.59 P mm/in. 58 2.28 58 2.28 90 3.54 58 2.28 90 3.54 138 5.43 Q mm/in. 82 3.21 82 3.21 120 4.72 122 4.78 160 6.30 202 7.93 R mm/in. — — — — — — — — 40 1.57 75 2.95 S mm/in. 96 3.78 96 3.78 136 5.35 136 5.35 176 6.93 215 8.46 U mm/in. 3 0.12 3 0.12 3 0.12 3 0.12 3 0.12 3.5 0.14 Purchase panels separately. 294 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 295 Polycarbonate and ABS QLINE D 3 Polycarbonate and ABS QLINE E QLINE E, Type 4X QLINE E APPLICATION QLINE E Enclosures house larger controls, provide additional sizerange options and offer greater internal mounting flexibility than smaller QLINE products. Featuring contoured bodies with flush cover screws, they are functional in corrosive environments and can withstand occasional submersion. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-UL rated alternative. SPECIFICATIONS • • • • • • • • • FINISH INDUSTRY STANDARDS Polycarbonate and ABS enclosure material is RAL 7035 light-gray inside and out. Optional panels are plated steel. Polycarbonate Enclosure UL 508A Listed; Type 4, 4X, 6, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 6, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 6, 12, 13 CSA File No. 42186: Type 4, 4X, 12, 13 IEC 60529, IP67 ABS Enclosure NEMA/EEMAC Type 4, 4X, 6, 12, 13 IEC 60529, IP67  ody is impact-resistant polycarbonate for PCE series and ABS B for ABE series Opaque and clear covers are impact-resistant polycarbonate for PCE, opaque covers are ABS for ABE series Polycarbonate and ABS material is easily punched, drilled, filed or sawed Cross-point flush cover screws are strong, durable polyamide Cover includes a molded-in wire lead hole Mounting tracks along body side walls for PC card installation Molded internal pads for mounting optional panels, rails and other components S eamless foam-in-place gasket assures water-tight and dusttight seal Material is halogen free ACCESSORIES See also Accessories. Brass Inserts Hardware Kit Hinge Kit HOL-SEALERS Non-Metallic Hole Seals Mounting Bracket Kit MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: Q41 296 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Polycarbonate Catalog Number Q1388PCE Q1388PCECC Q13138PCE Q13138PCECC Q18138PCE Q18138PCECC Q18188PCE Q18188PCECC Q25188PCE Q25188PCECC Q13810PCE Q13810PCECC Q131310PCE Q131310PCECC Q181310PCE Q181310PCECC Q181810PCE Q181810PCECC Q251810PCE Q251810PCECC Q13813PCE Q13813PCECC Q131313PCE Q131313PCECC Q181313PCE Q181313PCECC Q181813PCE Q181813PCECC Q181315PCE Q181315PCECC Q181815PCE Q181815PCECC Q251815PCE Q251815PCECC AxBxC mm/in. 119 x 69 x 67 4.69 x 2.72 x 2.64 119 x 69 x 67 4.67 x 2.70 x 2.65 119 x 119 x 67 4.67 x 4.67 x 2.65 119 x 119 x 67 4.67 x 4.67 x 2.65 169 x 119 x 67 6.63 x 4.67 x 2.65 169 x 119 x 67 6.63 x 4.67 x 2.65 169 x 169 x 67 6.63 x 6.63 x 2.65 169 x 169 x 67 6.63 x 6.63 x 2.65 244 x 169 x 67 9.59 x 6.63 x 2.65 244 x 169 x 67 9.59 x 6.63 x 2.65 119 x 69 x 92 4.67 x 2.70 x 3.64 119 x 69 x 92 4.67 x 2.70 x 3.64 119 x 119 x 92 4.67 x 4.67 x 3.64 119 x 119 x 92 4.67 x 4.67 x 3.64 169 x 119 x 92 6.63 x 4.67 x 3.64 169 x 119 x 92 6.63 x 4.67 x 3.64 169 x 169 x 92 6.63 x 6.63 x 3.64 169 x 169 x 92 6.63 x 6.63 x 3.64 244 x 169 x 92 9.59 x 6.63 x 3.64 244 x 169 x 92 9.59 x 6.63 x 3.64 119 x 69 x 117 4.67 x 2.70 x 4.62 119 x 69 x 117 4.67 x 2.70 x 4.62 119 x 119 x 117 4.67 x 4.67 x 4.62 119 x 119 x 117 4.67 x 4.67 x 4.62 169 x 119 x 117 6.63 x 4.67 x 4.62 169 x 119 x 117 6.63 x 4.67 x 4.62 169 x 169 x 117 6.63 x 6.63 x 4.62 169 x 169 x 117 6.63 x 6.63 x 4.62 169 x 119 x 142 6.63 x 4.67 x 5.61 169 x 119 x 142 6.63 x 4.67 x 5.61 169 x 169 x 142 6.63 x 6.63 x 5.61 169 x 169 x 142 6.63 x 6.63 x 5.61 244 x 169 x 142 9.59 x 6.63 x 5.61 244 x 169 x 142 9.59 x 6.63 x 5.61 Cover Style Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear External Dimensions LxW mm/in. 125 x 75 4.92 x 2.95 125 x 75 4.92 x 2.95 125 x 125 4.92 x 4.92 125 x 125 4.92 x 4.92 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 250 x 175 9.84 x 6.89 250 x 175 9.84 x 6.89 125 x 75 4.92 x 2.95 125 x 75 4.92 x 2.95 125 x 125 4.92 x 4.92 125 x 125 4.92 x 4.92 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 250 x 175 9.84 x 6.89 250 x 175 9.84 x 6.89 125 x 75 4.92 x 2.95 125 x 75 4.92 x 2.95 125 x 125 4.92 x 4.92 125 x 125 4.92 x 4.92 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 250 x 175 9.84 x 6.89 250 x 175 9.84 x 6.89 Panel Q138PE Q138PE Q1313PE Q1313PE Q1813PE Q1813PE Q1818PE Q1818PE Q2518PE Q2518PE Q138PE Q138PE Q1313PE Q1313PE Q1813PE Q1813PE Q1818PE Q1818PE Q2518PE Q2518PE Q138PE Q138PE Q1313PE Q1313PE Q1813PE Q1813PE Q1818PE Q1818PE Q1813PE Q1813PE Q1818PE Q1818PE Q2518PE Q2518PE Panel Size DxE mm/in. 98 x 48 3.86 x 1.89 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 223 x 148 8.78 x 5.83 223 x 148 8.78 x 5.83 98 x 48 3.86 x 1.89 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 223 x 148 8.78 x 5.83 223 x 148 8.78 x 5.83 98 x 48 3.86 x 1.89 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 223 x 148 8.78 x 5.83 223 x 148 8.78 x 5.83 Mounting GxH mm/in. 110 x 60 4.33 x 2.36 110 x 60 4.33 x 2.36 110 x 110 4.33 x 4.33 110 x 110 4.33 x 4.33 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 235 x 160 9.25 x 6.30 235 x 160 9.25 x 6.30 110 x 60 4.33 x 2.36 110 x 60 4.33 x 2.36 110 x 110 4.33 x 4.33 110 x 110 4.33 x 4.33 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 235 x 160 9.25 x 6.30 235 x 160 9.25 x 6.30 110 x 60 4.33 x 2.36 110 x 60 4.33 x 2.36 110 x 110 4.33 x 4.33 110 x 110 4.33 x 4.33 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 235 x 160 9.25 x 6.30 235 x 160 9.25 x 6.30 F mm/in. 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 136 5.35 136 5.35 136 5.35 136 5.35 136 5.35 136 5.35 K mm/in. 25 0.98 25 0.98 25 0.98 25 0.98 25 0.98 25 0.98 25 0.98 25 0.98 25 0.98 25 0.98 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 P mm/in. 40 1.57 40 1.57 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 139 5.47 139 5.47 40 1.57 40 1.57 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 139 5.47 139 5.47 40 1.57 40 1.57 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 90 3.54 90 3.54 140 5.51 140 5.51 139 5.47 139 5.47 Q mm/in. 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 125 4.92 125 4.92 202 7.95 202 7.95 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 125 4.92 125 4.92 202 7.95 202 7.95 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 125 4.92 125 4.92 100 3.94 100 3.94 125 4.92 125 4.92 202 7.95 202 7.95 S mm/in. 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 140 5.51 140 5.51 215 8.46 215 8.46 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 140 5.51 140 5.51 215 8.46 215 8.46 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 215 8.46 215 8.46 3 A x B x C are internal dimensions. Purchase panels separately. EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 297 Polycarbonate and ABS QLINE E 3 Polycarbonate and ABS QLINE E Standard Product  ABS Catalog Number Q1388ABE Q1388ABECC Q13138ABE Q13138ABECC Q18138ABE Q18138ABECC Q18188ABE Q18188ABECC Q25188ABE Q25188ABECC Q13810ABE Q13810ABECC Q131310ABE Q131310ABECC Q181310ABE Q181310ABECC Q181810ABE Q181810ABECC Q251810ABE Q251810ABECC Q13813ABE Q13813ABECC Q131313ABE Q131313ABECC Q181313ABE Q181313ABECC Q181813ABE Q181813ABECC Q181315ABE Q181315ABECC Q181815ABE Q181815ABECC Q251815ABE Q251815ABECC 298 AxBxC mm/in. 75 x 125 x 75 2.95 x 4.92 x 2.95 75 x 125 x 75 2.95 x 4.92 x 2.95 125 x 125 x 75 4.92 x 4.92 x 2.95 125 x 125 x 75 4.92 x 4.92 x 2.95 125 x 175 x 75 4.92 x 6.89 x 2.95 125 x 175 x 75 4.92 x 6.89 x 2.95 175 x 175 x 75 6.89 x 6.89 x 2.95 175 x 175 x 75 6.89 x 6.89 x 2.95 175 x 250 x 75 6.89 x 9.84 x 2.95 175 x 250 x 75 6.89 x 9.84 x 2.95 119 x 69 x 92 4.67 x 2.70 x 3.64 75 x 125 x 100 2.95 x 4.92 x 3.94 119 x 119 x 92 4.67 x 4.67 x 3.64 125 x 125 x 100 4.92 x 4.92 x 3.94 169 x 119 x 92 6.63 x 4.67 x 3.64 125 x 175 x 100 4.92 x 6.89 x 3.94 169 x 169 x 92 6.63 x 6.63 x 3.64 175 x 175 x 100 6.89 x 6.89 x 3.94 244 x 169 x 92 9.59 x 6.63 x 3.64 175 x 250 x 100 6.89 x 9.84 x 3.94 75 x 125 x 125 2.95 x 4.92 x 4.92 75 x 125 x 125 2.95 x 4.92 x 4.92 125 x 125 x 125 4.92 x 4.92 x 4.92 125 x 125 x 125 4.92 x 4.92 x 4.92 125 x 175 x 125 4.92 x 6.89 x 4.92 125 x 175 x 125 4.92 x 6.89 x 4.92 175 x 175 x 125 6.89 x 6.89 x 4.92 175 x 175 x 125 6.89 x 6.89 x 4.92 169 x 119 x 142 6.63 x 4.67 x 5.61 125 x 175 x 150 4.92 x 6.89 x 5.91 169 x 169 x 142 6.63 x 6.63 x 5.61 175 x 175 x 150 6.89 x 6.89 x 5.91 244 x 169 x 142 9.59 x 6.63 x 5.61 175 x 250 x 150 6.89 x 9.84 x 5.91 Non-Metallic Cover Style Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear External Dimensions LxW mm/in. 125 x 75 4.92 x 2.95 125 x 75 4.92 x 2.95 125 x 125 4.92 x 4.92 125 x 125 4.92 x 4.92 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 250 x 175 9.84 x 6.89 250 x 175 9.84 x 6.89 125 x 75 4.92 x 2.95 125 x 75 4.92 x 2.95 125 x 125 4.92 x 4.92 125 x 125 4.92 x 4.92 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 250 x 175 9.84 x 6.89 250 x 175 9.84 x 6.89 125 x 75 4.92 x 2.95 125 x 75 4.92 x 2.95 125 x 125 4.92 x 4.92 125 x 125 4.92 x 4.92 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 175 x 175 6.89 x 6.89 250 x 175 9.84 x 6.89 250 x 175 9.84 x 6.89 Panel Q138PE Q138PE Q1313PE Q1313PE Q1813PE Q1813PE Q1818PE Q1818PE Q2518PE Q2518PE Q138PE Q138PE Q1313PE Q1313PE Q1813PE Q1813PE Q1818PE Q1818PE Q2518PE Q2518PE Q138PE Q138PE Q1313PE Q1313PE Q1813PE Q1813PE Q1818PE Q1818PE Q1813PE Q1813PE Q1818PE Q1818PE Q2518PE Q2518PE Panel Size DxE mm/in. 98 x 48 3.86 x 1.89 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 223 x 148 8.78 x 5.83 223 x 148 8.78 x 5.83 98 x 48 3.86 x 1.89 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 223 x 148 8.78 x 5.83 223 x 148 8.78 x 5.83 98 x 48 3.86 x 1.89 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 148 x 148 5.83 x 5.83 223 x 148 8.78 x 5.83 223 x 148 8.78 x 5.83 Mounting GxH mm/in. 110 x 60 4.33 x 2.36 110 x 60 4.33 x 2.36 110 x 110 4.33 x 4.33 110 x 110 4.33 x 4.33 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 235 x 160 9.25 x 6.30 235 x 160 9.25 x 6.30 110 x 60 4.33 x 2.36 110 x 60 4.33 x 2.36 110 x 110 4.33 x 4.33 110 x 110 4.33 x 4.33 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 5.83 x 5.83 6.30 x 6.30 5.83 x 5.83 6.30 x 6.30 235 x 160 9.25 x 6.30 235 x 160 9.25 x 6.30 110 x 60 4.33 x 2.36 110 x 60 4.33 x 2.36 110 x 110 4.33 x 4.33 110 x 110 4.33 x 4.33 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 235 x 160 9.25 x 6.30 235 x 160 9.25 x 6.30 SUBJECT TO CHANGE WITHOUT NOTICE F mm/in. 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 61 2.40 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 86 3.39 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 111 4.37 136 5.35 136 5.35 136 5.35 136 5.35 136 5.35 136 5.35 K mm/in. 25 .98 25 .98 25 .98 25 .98 25 .98 25 .98 25 .98 25 .98 25 .98 25 .98 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 50 1.97 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 P mm/in. 40 1.57 40 1.57 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 139 5.47 139 5.47 40 1.57 40 1.57 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 139 5.47 139 5.47 40 1.57 40 1.57 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 90 3.54 90 3.54 140 5.51 140 5.51 139 5.47 139 5.47 Q mm/in. 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 125 4.92 125 4.92 202 7.95 202 7.95 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 125 4.92 125 4.92 202 7.95 202 7.95 75 2.95 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 125 4.92 125 4.92 100 3.94 100 3.94 125 4.92 125 4.92 202 7.95 202 7.95 S mm/in. 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 140 5.51 140 5.51 215 8.46 215 8.46 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 140 5.51 140 5.51 215 8.46 215 8.46 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 215 8.46 215 8.46 EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 299 Polycarbonate and ABS QLINE E 3 Polycarbonate and ABS QLINE E Brass Inserts Self-tapping Brass Inserts fit into molded pads in the bottom of the enclosure. Inserts have an M2 internal machine screw thread and M4 self-tapping external thread. Catalog Number QEBI Description M2 thread inserts Qty. Pkg. 4 Bulletin: Q41Y Hinge Kit Includes two polyamid hinges, eight M4 self-tapping zinc-plated screws, eight flat washers and drilling template. Use on all QLINE E enclosures. Kit might not meet Type 4 requirements and should, therefore, be verified by customer. Catalog Number QDEHK Bulletin: Q41Y Mounting Bracket Kit Kit includes four polycarbonate brackets and four M4 self-tapping, plated screws. Use on all QLINE E enclosures. No modification to the enclosure is required for installation. Maintains listed ratings. Catalog Number QEMFK Bulletin: Q41Y Hardware Kit Four cross-point polyamide cover screws and four self-tapping plated screws used to mount optional panels, rails and other components. This kit is offered as a replacement kit for lost or damaged hardware originally furnished with the enclosure. Catalog Number QEHK35 QEHK60 Description 35-mm screw 60-mm screw Fits QLINE Enclosure when C = 67 mm, 117 mm or 142 mm when C = 92 mm Bulletin: Q41Y Panels Bulletin: Q41Y Catalog Number Q138PE Q1313PE Q1813PE Q1818PE Q2518PE 300 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE Panel Size D x E mm/in. 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 223 x 148 8.78 x 5.83 EQUIPMENT PROTECTION Notes 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 301 Polycarbonate and ABS QLINE E 3 Polycarbonate and ABS QLINE E QLINE E, EMC, Type 4X APPLICATION Medium-size QLINE E polycarbonate EMC enclosures have contoured bodies and flush cover screws for an attractive, contemporary appearance while also providing EMC protection in corrosive environments. SPECIFICATIONS INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94: Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 12, 13 IEC 60529, IP66 • • • • • • • • •  ody is impact-resistant polycarbonate B EMC conductive coating in base and cover Gasket of silver/silicone Mounting holes molded directly under cover screws S crews provided for mounting optional panel Polycarbonate material is easily punched, drilled, filed or sawed Cross-point flush cover screws are strong, durable polyamide Mounting tracks along body side walls for PC card installation Molded internal pads for mounting optional panels, rails and other components FINISH Enclosure material is RAL 7035 light-gray outside. Optional panels are conductive steel. Bulletin: Q41EM Standard Product  Catalog Number Q1388PCEMC Q13138PCEMC Q131310PCEMC Q18138PCEMC Q181310PCEMC Q18188PCEMC AxBxC mm/in. 125 x 75 x 74 4.92 x 2.95 x 2.91 125 x 125 x 74 4.92 x 4.92 x 2.91 125 x 125 x 99 4.90 x 4.90 x 3.90 175 x 125 x 74 6.89 x 4.92 x 2.91 175 x 125 x 99 6.89 x 4.92 x 3.90 175 x 175 x 74 6.89 x 6.89 x 2.91 External Dimensions LxW mm/in. 125 x 75 4.92 x 2.95 125 x 125 4.92 x 4.92 125 x 125 4.92 x 4.92 175 x 125 6.89 x 4.92 175 x 125 6.89 x 4.92 175 x 175 6.89 x 6.89 Internal Dimensions AxBxC mm/in. 119 x 69 x 67 4.67 x 2.70 x 2.65 119x 119 x 67 4.67 x 4.67 x 2.65 119 x 119 x 92 4.67 x 4.67 x 3.64 169 x 119 x 67 6.63 x 4.67 x 2.65 169 x 119 x 92 6.63 x 4.67 x 3.64 169 x 169 x 67 6.63 x 6.63 x 2.65 Panel Q138PE Q1313PE Q1313PE Q1813PE Q1813PE Q1818PE Panel Size DxE mm/in. 98 x 48 3.86 x 1.89 98 x 98 3.86 x 3.86 98 x 98 3.86 x 3.86 148 x 98 5.83 x 3.86 148 x 98 5.83 x 3.86 148 x 148 5.83 x 5.83 Mounting GxH mm/in. 110 x 60 4.33 x 2.36 110 x 110 4.33 x 4.33 110 x 110 4.33 x 4.33 160 x 110 6.30 x 4.33 160 x 110 6.30 x 4.33 160 x 160 6.30 x 6.30 F mm/in. 61 2.38 61 2.38 86 3.37 61 2.38 86 3.37 61 2.38 K mm/in. 25 0.98 25 0.98 25 0.98 25 0.98 50 1.97 25 0.98 P mm/in. 40 1.57 90 3.54 90 3.54 90 3.54 90 3.54 140 5.51 Q mm/in. 75 2.95 75 2.95 75 2.95 100 3.94 100 3.94 125 4.92 S mm/in. 90 3.54 90 3.54 90 3.54 140 5.51 140 5.51 140 5.51 T mm/in. — — — — — — 15 0.59 15 0.59 — — W mm/in. — — 23 0.89 23 0.89 23 0.89 23 0.89 15 0.59 X mm/in. — — — — — — — — — — 35 1.38 Purchase panels separately. 302 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 303 Polycarbonate and ABS QLINE E 3 Polycarbonate and ABS QLINE I QLINE I, Type 4X QLINE I SPECIFICATIONS  ody is impact-resistant polycarbonate for PCI series and ABS B for ABI series • Opaque and clear covers are impact-resistant polycarbonate for PCI; opaque covers are ABS for ABI series • Polycarbonate and ABS material is easily punched, drilled, filed or sawed • Mounting holes molded directly under cover screws • Molded internal pads for mounting optional panels, rails and other components • Molded internal rails for mounting adjustable-depth panel kit • S crews provided for mounting optional panel • Optional extension rings are molded polycarbonate • Cover includes a molded-in hole for wire lead • S eamless foam-in-place gasket assures water-tight and dusttight seal • Material is halogen free Screw Cover Enclosures have easy-to-remove covers attached to body with strong, durable polyamide cross-point cover screws. Enclosures with Quick-Release Latches have polycarbonate hinges and polyester latches with a padlock provision. • INDUSTRY STANDARDS FINISH Polycarbonate Enclosure UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 12, 13 CSA File No. 42186: Type 4, 4X, 12, 13 IEC 60529, IP66 ABS Enclosure NEMA/EEMAC Type 4, 4X, 12, 13 IEC 60529, IP66 APPLICATION The largest-sized QLINE enclosure, QLINE I provides easy access and protects larger controls from corrosive environments. Choose from screw cover, hinge, internal mounting, variable depth and quick-release latch options to meet your design and security requirements. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-UL rated alternative. 304 Non-Metallic Polycarbonate and ABS enclosure material is RAL 7035 light-gray inside and out. Optional panels are plated steel. ACCESSORIES See also Accessories. Brass Insert Kit Cover Screw Kit Extension Rings Hardware Kit H2OMIT Vent Drains, Type 4X Hinge Kit HOL-SEALERS Non-Metallic Hole Seals Mounting Bracket Kit Panel Depth Fitting MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: Q41 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  Polycarbonate External Dim’s Cover LxW AxBxC mm/in. Style Cover Type mm/in. Catalog Number Q202013PCI 188 x 188 x 123 Opaque Screw 200 x 200 7.40 x 7.40 x 4.84 Cover 7.87 x 7.87 Q202013PCICC 188 x 188 x 123 Clear Screw 200 x 200 7.40 x 7.40 x 4.84 Cover 7.87 x 7.87 Q302013PCI 288 x 188 x 123 Opaque Screw 300 x 200 11.34 x 7.40 x 4.84 Cover 11.81 x 7.87 Q302013PCICC 288 x 188 x 123 Clear Screw 300 x 200 11.34 x 7.40 x 4.84 Cover 11.81 x 7.87 Q402013PCI 388 x 188 x 123 Opaque Screw 400 x 200 15.28 x 7.40 x 4.84 Cover 15.75 x 7.87 Q402013PCICC 388 x 188 x 123 Clear Screw 400 x 200 15.28 x 7.40 x 4.84 Cover 15.75 x 7.87 Q303013PCI 288 x 288 x 123 Opaque Screw 300 x 300 11.34 x 11.34 x 4.84 Cover 11.81 x 11.81 Q303013PCICC 288 x 288 x 123 Clear Screw 300 x 300 11.34 x 11.34 x 4.84 Cover 11.81 x 11.81 Q403013PCI 388 x 288 x 123 Opaque Screw 400 x 300 15.28 x 11.34 x 4.84 Cover 15.75 x 11.81 Q403013PCICC 388 x 288 x 123 Clear Screw 400 x 300 15.28 x 11.34 x 4.84 Cover 15.75 x 11.81 Q603013PCI 300 x 600 x 130 Opaque Screw 600 x 300 11.81 x 23.62 x 5.12 Cover 23.62 x 11.81 Q603013PCICC 300 x 600 x 130 Clear Screw 600 x 300 11.81 x 23.62 x 5.12 Cover 23.62 x 11.81 Q604013PCI 400 x 600 x 130 Opaque Screw 600 x 400 15.75 x 23.62 x 5.12 Cover 23.62 x 15.75 Q604013PCICC 400 x 600 x 130 Clear Screw 600 x 400 15.75 x 23.62 x 5.12 Cover 23.62 x 15.75 Q202018PCI 188 x 188 x 173 Opaque Screw 200 x 200 7.40 x 7.40 x 6.81 Cover 7.87 x 7.87 Q202018PCICC 188 x 188 x 173 Clear Screw 200 x 200 7.40 x 7.40 x 6.81 Cover 7.87 x 7.87 Q302018PCI 288 x 188 x 173 Opaque Screw 300 x 200 11.34 x 7.40 x 6.81 Cover 11.81 x 7.87 Q302018PCICC 288 x 188 x 173 Clear Screw 300 x 200 11.34 x 7.40 x 6.81 Cover 11.81 x 7.87 Q402018PCI 388 x 188 x 173 Opaque Screw 400 x 200 15.28 x 7.40 x 6.81 Cover 15.75 x 7.87 Q402018PCICC 388 x 188 x 173 Clear Screw 400 x 200 15.28 x 7.40 x 6.81 Cover 15.75 x 7.87 Q303018PCI 288 x 288 x 173 Opaque Screw 300 x 300 11.34 x 11.34 x 6.81 Cover 11.81 x 11.81 Q303018PCICC 288 x 288 x 173 Clear Screw 300 x 300 11.34 x 11.34 x 6.81 Cover 11.81 x 11.81 Q403018PCI 388 x 288 x 173 Opaque Screw 400 x 300 15.28 x 11.34 x 6.81 Cover 15.75 x 11.81 Q403018PCICC 388 x 288 x 173 Clear Screw 400 x 300 15.28 x 11.34 x 6.81 Cover 15.75 x 11.81 Q603018PCI 300 x 600 x 180 Opaque Screw 600 x 300 11.81 x 23.62 x 7.09 Cover 23.62 x 11.81 Q603018PCICC 300 x 600 x 180 Clear Screw 600 x 300 11.81 x 23.62 x 7.09 Cover 23.62 x 11.81 Q604018PCI 400 x 600 x 180 Opaque Screw 600 x 400 15.75 x 23.62 x 7.09 Cover 23.62 x 15.75 Q604018PCICC 400 x 600 x 180 Clear Screw 600 x 400 15.75 x 23.62 x 7.09 Cover 23.62 x 15.75 Q202013PCIQRR 200 x 200 x 130 Opaque QR 200 x 200 7.87 x 7.87 x 5.12 Latch 7.87 x 7.87 Q202013PCIQRCCR 200 x 200 x 130 Clear QR 200 x 200 7.87 x 7.87 x 5.12 Latch 7.87 x 7.87 Q302013PCIQRR 200 x 300 x 130 Opaque QR 300 x 200 7.87 x 11.81 x 5.12 Latch 11.81 x 7.87 Q302013PCIQRCCR 200 x 300 x 130 Clear QR 300 x 200 7.87 x 11.81 x 5.12 Latch 11.81 x 7.87 Q402013PCIQRR 200 x 400 x 130 Opaque QR 400 x 200 7.87 x 15.75 x 5.12 Latch 15.75 x 7.87 Q402013PCIQRCCR 200 x 400 x 130 Clear QR 400 x 200 7.87 x 15.75 x 5.12 Latch 15.75 x 7.87 Q303013PCIQRR 300 x 300 x 130 Opaque QR 300 x 300 11.81 x 11.81 x 5.12 Latch 11.81 x 11.81 Q303013PCIQRCCR 300 x 300 x 130 Clear QR 300 x 300 11.81 x 11.81 x 5.12 Latch 11.81 x 11.81 Q403013PCIQRR 300 x 400 x 130 Opaque QR 400 x 300 11.81 x 15.75 x 5.12 Latch 15.75 x 11.81 Q403013PCIQRCCR 300 x 400 x 130 Clear QR 400 x 300 11.81 x 15.75 x 5.12 Latch 15.75 x 11.81 EQUIPMENT PROTECTION Panel Q2020PI Q2020PI Q3020PI Q3020PI Q4020PI Q4020PI Q3030PI Q3030PI Q4030PI Q4030PI Q6030PI Q6030PI Q6040PI Q6040PI Q2020PI Q2020PI Q3020PI Q3020PI Q4020PI Q4020PI Q3030PI Q3030PI Q4030PI Q4030PI Q6030PI Q6030PI Q6040PI Q6040PI Q2020PI Q2020PI Q3020PI Q3020PI Q4020PI Q4020PI Q3030PI Q3030PI Q4030PI Q4030PI Panel Size DxE mm/in. 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 260 x 160 10.24 x 6.30 260 x 160 10.24 x 6.30 360 x 160 14.17 x 6.30 360 x 160 14.17 x 6.30 260 x 260 10.24 x 10.24 260 x 260 10.24 x 10.24 360 x 260 14.17 x 10.24 360 x 260 14.17 x 10.24 560 x 260 22.05 x 10.24 560 x 260 22.05 x 10.24 560 x 360 22.05 x 14.17 560 x 360 22.05 x 14.17 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 260 x 160 10.24 x 6.30 260 x 160 10.24 x 6.30 360 x 160 14.17 x 6.30 360 x 160 14.17 x 6.30 260 x 260 10.24 x 10.24 260 x 260 10.24 x 10.24 360 x 260 14.17 x 10.24 360 x 260 14.17 x 10.24 560 x 260 22.05 x 10.24 560 x 260 22.05 x 10.24 560 x 360 22.05 x 14.17 560 x 360 22.05 x 14.17 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 260 x 160 10.24 x 6.30 260 x 160 10.24 x 6.30 360 x 160 14.17 x 6.30 360 x 160 14.17 x 6.30 260 x 260 10.24 x 10.24 260 x 260 10.24 x 10.24 360 x 260 14.17 x 10.24 360 x 260 14.17 x 10.24 Mounting Extension G x H Ring mm/in. Q2020EXTI 180 x 180 7.09 x 7.09 Q2020EXTI 180 x 180 7.09 x 7.09 Q3020EXTI 280 x 180 11.02 x 7.09 Q3020EXTI 280 x 180 11.02 x 7.09 Q4020EXTI 380 x 180 14.96 x 7.09 Q4020EXTI 380 x 180 14.96 x 7.09 Q3030EXTI 280 x 280 11.02 x 11.02 Q3030EXTI 280 x 280 11.02 x 11.02 Q4030EXTI 380 x 280 14.96 x 11.02 Q4030EXTI 380 x 280 14.96 x 11.02 Q6030EXTI 580 x 280 22.83 x 11.02 Q6030EXTI 580 x 280 22.83 x 11.02 Q6040EXTI 580 x 380 22.83 x 14.96 Q6040EXTI 580 x 380 22.83 x 14.96 Q2020EXTI 180 x 180 7.09 x 7.09 Q2020EXTI 180 x 180 7.09 x 7.09 Q3020EXTI 280 x 180 11.02 x 7.09 Q3020EXTI 280 x 180 11.02 x 7.09 Q4020EXTI 380 x 180 14.96 x 7.09 Q4020EXTI 380 x 180 14.96 x 7.09 Q3030EXTI 280 x 280 11.02 x 11.02 Q3030EXTI 280 x 280 11.02 x 11.02 Q4030EXTI 380 x 280 14.96 x 11.02 Q4030EXTI 380 x 280 14.96 x 11.02 Q6030EXTI 580 x 280 22.83 x 11.02 Q6030EXTI 580 x 280 22.83 x 11.02 Q6040EXTI 580 x 380 22.83 x 14.96 Q6040EXTI 580 x 380 22.83 x 14.96 — 180 x 180 7.09 x 7.09 — 180 x 180 7.09 x 7.09 — 280 x 180 11.02 x 7.09 — 280 x 180 11.02 x 7.09 — 380 x 180 14.96 x 7.09 — 380 x 180 14.96 x 7.09 — 280 x 280 11.02 x 11.02 — 280 x 280 11.02 x 11.02 — 380 x 280 14.96 x 11.02 — 380 x 280 14.96 x 11.02 F mm/in. 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 P mm/in. 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 350 13.78 350 13.78 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 350 13.78 350 13.78 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 250 9.84 250 9.84 250 9.84 250 9.84 PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Q mm/in. 150 5.91 150 5.91 250 9.84 250 9.84 350 13.78 350 13.78 250 9.84 250 9.84 350 13.78 350 13.78 550 21.65 550 21.65 550 21.65 550 21.65 150 5.91 150 5.91 250 9.84 250 9.84 350 13.78 350 13.78 250 9.84 250 9.84 350 13.78 350 13.78 550 21.65 550 21.65 550 21.65 550 21.65 150 5.91 150 5.91 250 9.84 250 9.84 350 13.78 350 13.78 250 9.84 250 9.84 350 13.78 350 13.78 R mm/in. 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 340 13.39 340 13.39 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 340 13.39 340 13.39 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 240 9.45 240 9.45 240 9.45 240 9.45 S mm/in. 140 5.51 140 5.51 240 9.45 240 9.45 340 13.39 340 13.39 240 9.45 240 9.45 340 13.39 340 13.39 540 21.26 540 21.26 540 21.26 540 21.26 140 5.51 140 5.51 240 9.45 240 9.45 340 13.39 340 13.39 240 9.45 240 9.45 340 13.39 340 13.39 540 21.26 540 21.26 540 21.26 540 21.26 140 5.51 140 5.51 240 9.45 240 9.45 340 13.39 340 13.39 240 9.45 240 9.45 340 13.39 340 13.39 T mm/in. 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 320 12.60 320 12.60 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 320 12.60 320 12.60 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 220 8.66 220 8.66 220 8.66 220 8.66 U mm/in. 110 4.33 120 4.33 210 8.27 210 8.27 310 12.20 310 12.20 210 8.27 210 8.27 310 12.20 310 12.20 510 20.08 510 20.08 510 20.08 510 20.08 110 4.33 110 4.33 110 4.33 110 4.33 310 12.20 310 12.20 210 8.27 210 8.27 310 12.20 310 12.20 510 20.08 510 20.08 510 20.08 510 20.08 110 4.33 110 4.33 210 8.27 210 8.27 310 12.20 310 12.20 210 8.27 210 8.27 310 12.20 310 12.20 Y mm/in. 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 300 11.81 300 11.81 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 300 11.81 300 11.81 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 200 7.87 200 7.87 200 7.87 200 7.87 Z mm/in. 100 3.94 100 3.94 200 7.87 200 7.87 300 11.81 300 11.81 200 7.87 200 7.87 300 11.81 300 11.81 500 19.69 500 19.69 500 19.69 500 19.69 100 3.94 100 3.94 200 7.87 200 7.87 300 11.81 300 11.81 200 7.87 200 7.87 300 11.81 300 11.81 500 19.69 500 19.69 500 19.69 500 19.69 100 3.94 100 3.94 200 7.87 200 7.87 300 11.81 300 11.81 200 7.87 200 7.87 300 11.81 300 11.81 Non-Metallic 305 3 Polycarbonate and ABS QLINE I 3 Polycarbonate and ABS QLINE I External Dim’s Cover LxW AxBxC mm/in. Style Cover Type mm/in. Catalog Number Q603013PCIQRR 300 x 600 x 130 Opaque QR 600 x 300 11.81 x 23.62 x 5.12 Latch 23.62 x 11.81 Q603013PCIQRCCR 300 x 600 x 130 Clear QR 600 x 300 11.81 x 23.62 x 5.12 Latch 23.62 x 11.81 Q604013PCIQRR 400 x 600 x 130 Opaque QR 600 x 400 15.75 x 23.62 x 5.12 Latch 23.62 x 15.75 Q604013PCIQRCCR 400 x 600 x 130 Clear QR 600 x 400 15.75 x 23.62 x 5.12 Latch 23.62 x 15.75 Q202018PCIQRR 200 x 200 x 180 Opaque QR 200 x 200 7.87 x 7.87 x 7.09 Latch 7.87 x 7.87 Q202018PCIQRCCR 200 x 200 x 180 Clear QR 200 x 200 7.87 x 7.87 x 7.09 Latch 7.87 x 7.87 Q302018PCIQRR 200 x 300 x 180 Opaque QR 300 x 200 7.87 x 11.81 x 7.09 Latch 11.81 x 7.87 Q302018PCIQRCCR 200 x 300 x 180 Clear QR 300 x 200 7.87 x 11.81 x 7.09 Latch 11.81 x 7.87 Q402018PCIQRR 200 x 400 x 180 Opaque QR 400 x 200 7.87 x 15.75 x 7.09 Latch 15.75 x 7.87 Q402018PCIQRCCR 200 x 400 x 180 Clear QR 400 x 200 7.87 x 15.75 x 7.09 Latch 15.75 x 7.87 Q303018PCIQRR 300 x 300 x 180 Opaque QR 300 x 300 11.81 x 11.81 x 7.09 Latch 11.81 x 11.81 Q303018PCIQRCCR 300 x 300 x 180 Clear QR 300 x 300 11.81 x 11.81 x 7.09 Latch 11.81 x 11.81 Q403018PCIQRR 300 x 400 x 180 Opaque QR 400 x 300 11.81 x 15.75 x 7.09 Latch 15.75 x 11.81 Q403018PCIQRCCR 300 x 400 x 180 Clear QR 400 x 300 11.81 x 15.75 x 7.09 Latch 15.75 x 11.81 Q603018PCIQRR 300 x 600 x 180 Opaque QR 600 x 300 11.81 x 23.62 x 7.09 Latch 23.62 x 11.81 Q603018PCIQRCCR 300 x 600 x 180 Clear QR 600 x 300 11.81 x 23.62 x 7.09 Latch 23.62 x 11.81 Q604018PCIQRR 400 x 600 x 180 Opaque QR 600 x 400 15.75 x 23.62 x 7.09 Latch 23.62 x 15.75 Q604018PCIQRCCR 400 x 600 x 180 Clear QR 600 x 400 15.75 x 23.62 x 7.09 Latch 23.62 x 15.75 Panel Q6030PI Q6030PI Q6040PI Q6040PI Q2020PI Q2020PI Q3020PI Q3020PI Q4020PI Q4020PI Q3030PI Q3030PI Q4030PI Q4030PI Q6030PI Q6030PI Q6040PI Q6040PI Panel Size DxE mm/in. 560 x 260 22.05 x 10.24 560 x 260 22.05 x 10.24 560 x 360 22.05 x 14.17 560 x 360 22.05 x 14.17 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 260 x 160 10.24 x 6.30 260 x 160 10.24 x 6.30 360 x 160 14.17 x 6.30 360 x 160 14.17 x 6.30 260 x 260 10.24 x 10.24 260 x 260 10.24 x 10.24 360 x 260 14.17 x 10.24 360 x 260 14.17 x 10.24 560 x 260 22.05 x 10.24 560 x 260 22.05 x 10.24 560 x 360 22.05 x 14.17 560 x 360 22.05 x 14.17 Mounting Extension G x H Ring mm/in. — 580 x 280 22.83 x 11.02 — 580 x 280 22.83 x 11.02 — 580 x 380 22.83 x 14.96 — 580 x 380 22.83 x 14.96 — 180 x 180 7.09 x 7.09 — 180 x 180 7.09 x 7.09 — 280 x 180 11.02 x 7.09 — 280 x 180 11.02 x 7.09 — 380 x 180 14.96 x 7.09 — 380 x 180 14.96 x 7.09 — 280 x 280 11.02 x 11.02 — 280 x 280 11.02 x 11.02 — 380 x 280 14.96 x 11.02 — 380 x 280 14.96 x 11.02 — 580 x 280 22.83 x 11.02 — 580 x 280 22.83 x 11.02 — 580 x 380 22.83 x 14.96 — 580 x 380 22.83 x 14.96 F mm/in. 115 4.53 115 4.53 115 4.53 115 4.53 115 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 P mm/in. 250 9.84 250 9.84 350 13.78 350 13.78 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 350 13.78 350 13.78 Q mm/in. 550 21.65 550 21.65 550 21.65 550 21.65 150 5.91 150 5.91 250 9.84 250 9.84 350 13.78 350 13.78 250 9.84 250 9.84 350 13.78 350 13.78 550 21.65 550 21.65 550 21.65 550 21.65 R mm/in. 240 9.45 240 9.45 340 13.39 340 13.39 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 340 13.39 340 13.39 S mm/in. 540 21.26 540 21.26 540 21.26 540 21.26 140 5.51 140 5.51 240 9.45 240 9.45 340 13.39 340 13.39 240 9.45 240 9.45 340 13.39 340 13.39 540 21.25 540 21.26 540 21.28 540 21.26 T mm/in. 220 8.66 220 8.66 320 12.60 320 12.60 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 320 12.60 320 12.60 U mm/in. 510 20.08 510 20.08 510 20.08 510 20.08 110 4.33 110 4.33 110 4.33 110 4.33 310 12.20 310 12.20 210 8.27 210 8.27 310 12.20 310 12.20 510 20.08 510 20.08 510 20.08 510 20.08 Y mm/in. 200 7.87 200 7.87 300 11.81 300 11.81 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 300 11.81 300 11.81 Z mm/in. 500 19.69 500 19.69 500 19.69 500 19.69 100 3.94 100 3.94 200 7.87 200 7.87 300 11.81 300 11.81 200 7.87 200 7.87 300 11.81 300 11.81 500 19.69 500 19.69 500 19.69 500 19.69 A x B x C are internal dimensions. Purchase panels and extension rings separately. 306 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Standard Product  ABS, Screw Cover Catalog Number Q202013ABI Q202013ABICC Q302013ABI Q302013ABICC Q402013ABI Q402013ABICC Q303013ABI Q303013ABICC Q403013ABI Q403013ABICC Q603013ABI Q603013ABICC Q604013ABI Q604013ABICC Q202018ABI Q202018ABICC Q302018ABI Q302018ABICC Q402018ABI Q402018ABICC Q303018ABI Q303018ABICC Q403018ABI Q403018ABICC Q603018ABI Q603018ABICC Q604018ABI Q604018ABICC AxBxC mm/in. 188 x 188 x 123 7.40 x 7.40 x 4.84 200 x 200 x 130 7.87 x 7.87 x 5.12 300 x 200 x 123 11.81 x 7.87 x 4.84 200 x 300 x 130 7.87 x 11.81 x 5.12 388 x 188 x 123 15.28 x 7.40 x 4.84 200 x 400 x 130 7.87 x 15.75 x 5.12 288 x 288 x 123 11.34 x 11.34 x 4.84 300 x 300 x 130 11.81 x 11.81 x 5.12 388 x 288 x 123 15.28 x 11.34 x 4.84 300 x 400 x 130 11.81 x 15.75 x 5.12 300 x 600 x 130 11.81 x 23.62 x 5.12 300 x 600 x 130 11.81 x 23.62 x 5.12 400 x 600 x 130 15.75 x 23.62 x 5.12 400 x 600 x 130 15.75 x 23.62 x 5.12 188 x 188 x 173 7.40 x 7.40 x 6.81 200 x 200 x 180 7.87 x 7.87 x 7.09 288 x 188 x 173 11.34 x 7.40 x 6.81 200 x 300 x 180 7.87 x 11.81 x 7.09 388 x 188 x 173 15.28 x 7.40 x 6.81 200 x 400 x 180 7.87 x 15.75 x 7.09 288 x 288 x 173 11.34 x 11.34 x 6.81 300 x 300 x 180 11.81 x 11.81 x 7.09 388 x 288 x 173 15.28 x 11.34 x 6.81 300 x 400 x 180 11.81 x 15.75 x 7.09 300 x 600 x 180 11.81 x 23.62 x 7.09 300 x 600 x 180 11.81 x 23.62 x 7.09 400 x 600 x 180 15.75 x 23.62 x 7.09 400 x 600 x 180 15.75 x 23.62 x 7.09 EQUIPMENT PROTECTION Cover Style Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear Opaque Clear External Dim’s LxW mm/in. 200 x 200 7.87 x 7.87 200 x 200 7.87 x 7.87 300 x 200 11.81 x 7.87 300 x 200 11.81 x 7.87 400 x 200 15.75 x 7.87 400 x 200 15.75 x 7.87 300 x 300 11.81 x 11.81 300 x 300 11.81 x 11.81 400 x 300 15.75 x 11.81 400 x 300 15.75 x 11.81 600 x 300 23.62 x 11.81 600 x 300 23.62 x 11.81 600 x 400 23.62 x 15.75 600 x 400 23.62 x 15.75 200 x 200 7.87 x 7.87 200 x 200 7.87 x 7.87 300 x 200 11.81 x 7.87 300 x 200 11.81 x 7.87 400 x 200 15.75 x 7.87 400 x 200 15.75 x 7.87 300 x 300 11.81 x 11.81 300 x 300 11.81 x 11.81 400 x 300 15.75 x 11.81 400 x 300 15.75 x 11.81 600 x 300 23.62 x 11.81 600 x 300 23.62 x 11.81 600 x 400 23.62 x 15.75 600 x 400 23.62 x 15.75 Panel Q2020PI Q2020PI Q3020PI Q3020PI Q4020PI Q4020PI Q3030PI Q3030PI Q4030PI Q4030PI Q6030PI Q6030PI Q6040PI Q6040PI Q2020PI Q2020PI Q3020PI Q3020PI Q4020PI Q4020PI Q3030PI Q3030PI Q4030PI Q4030PI Q6030PI Q6030PI Q6040PI Q6040PI Panel Size DxE mm/in. 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 260 x 160 10.24 x 6.30 260 x 160 10.24 x 6.30 360 x 160 14.17 x 6.30 360 x 160 14.17 x 6.30 260 x 260 10.24 x 10.24 260 x 260 10.24 x 10.24 360 x 260 14.17 x 10.24 360 x 260 14.17 x 10.24 560 x 260 22.05 x 10.24 560 x 260 22.05 x 10.24 560 x 360 22.05 x 14.17 560 x 360 22.05 x 14.17 160 x 160 6.30 x 6.30 160 x 160 6.30 x 6.30 260 x 160 10.24 x 6.30 260 x 160 10.24 x 6.30 360 x 160 14.17 x 6.30 360 x 160 14.17 x 6.30 260 x 260 10.24 x 10.24 260 x 260 10.24 x 10.24 360 x 260 14.17 x 10.24 360 x 260 14.17 x 10.24 560 x 260 22.05 x 10.24 560 x 260 22.05 x 10.24 560 x 360 22.05 x 14.17 560 x 360 22.05 x 14.17 Extension Ring Q2020EXTI Q2020EXTI Q3020EXTI Q3020EXTI Q4020EXTI Q4020EXTI Q3030EXTI Q3030EXTI Q4030EXTI Q4030EXTI Q6030EXTI Q6030EXTI Q6040EXTI Q6040EXTI Q2020EXTI Q2020EXTI Q3020EXTI Q3020EXTI Q4020EXTI Q4020EXTI Q3030EXTI Q3030EXTI Q4030EXTI Q4030EXTI Q6030EXTI Q6030EXTI Q6040EXTI Q6040EXTI Mounting GxH mm/in. 180 x 180 7.09 x 7.09 180 x 180 7.09 x 7.09 280 x 180 11.02 x 7.09 280 x 180 11.02 x 7.09 380 x 180 14.96 x 7.09 380 x 180 14.96 x 7.09 280 x 280 11.02 x 11.02 280 x 280 11.02 x 11.02 380 x 280 14.96 x 11.02 380 x 280 14.96 x 11.02 580 x 280 22.83 x 11.02 580 x 280 22.83 x 11.02 580 x 380 22.83 x 14.96 580 x 380 22.83 x 14.96 180 x 180 7.09 x 7.09 180 x 180 7.09 x 7.09 280 x 180 11.02 x 7.09 280 x 180 11.02 x 7.09 380 x 180 14.96 x 7.09 380 x 180 14.96 x 7.09 280 x 280 11.02 x 11.02 280 x 280 11.02 x 11.02 380 x 280 14.96 x 11.02 380 x 280 14.96 x 11.02 580 x 280 22.83 x 11.02 580 x 280 22.83 x 11.02 580 x 380 22.83 x 14.96 580 x 380 22.83 x 14.96 F mm/in. 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 115 4.53 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 6.50 P mm/in. 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 350 13.78 350 13.78 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 150 5.91 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 250 9.84 350 13.78 350 13.78 Q mm/in. 150 5.91 150 5.91 250 9.84 250 9.84 350 13.78 350 13.78 250 9.84 250 9.84 350 13.78 350 13.78 550 21.65 550 21.65 550 21.65 550 21.65 150 5.91 150 5.91 250 9.84 250 9.84 350 13.78 350 13.78 250 9.84 250 9.84 350 13.78 350 13.78 550 21.65 550 21.65 550 21.65 550 21.65 PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com R mm/in. 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 340 13.39 340 13.39 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 140 5.51 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 240 9.45 340 13.39 340 13.39 S mm/in. 140 5.51 140 5.51 240 9.45 240 9.45 340 13.39 340 13.39 240 9.45 240 9.45 240 13.39 240 13.39 540 21.26 540 21.26 540 21.26 540 21.26 140 5.51 140 5.51 240 9.45 240 9.45 340 13.39 340 13.39 240 9.45 240 9.45 340 13.39 340 13.39 540 21.26 540 21.26 540 21.26 540 21.26 T mm/in. 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 320 12.60 320 12.60 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 120 4.72 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 220 8.66 320 12.60 320 12.60 U mm/in. 110 4.33 110 4.33 210 8.27 210 8.27 310 12.20 310 12.20 210 8.27 210 8.27 310 12.20 310 12.20 510 20.08 510 20.08 510 20.08 510 20.08 110 4.33 110 4.33 110 4.33 110 4.33 310 12.20 310 12.20 210 8.27 210 8.27 310 12.20 310 12.20 510 20.08 510 20.08 510 20.08 510 20.08 Y mm/in. 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 300 11.81 300 11.81 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 100 3.94 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 200 7.87 300 11.81 300 11.81 Z mm/in. 100 3.94 100 3.94 200 7.87 200 7.87 300 11.81 300 11.81 200 7.87 200 7.87 300 11.81 300 11.81 300 11.81 300 11.81 500 19.69 500 19.69 100 3.94 100 3.94 200 7.87 200 7.87 300 11.81 300 11.81 200 7.87 200 7.87 300 11.81 300 11.81 500 19.69 500 19.69 500 19.69 500 19.69 Non-Metallic 307 3 Polycarbonate and ABS QLINE I 3 Polycarbonate and ABS QLINE I 308 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 309 Polycarbonate and ABS QLINE I 3 Polycarbonate and ABS QLINE I Cover Screw Kit Screws are polyamide. Wing-headstyle screws provide rapid access to enclosure interior without requiring special tools to open. Kit includes four polyamide cover screws and four self-tapping, plated panel screws. Tamper-resistant screws have molded 3-mm double-bit drive; kit includes four cover screws, one key and four self-tapping, plated panel screws. Use on all QLINE I enclosures. Catalog Number QIWHSK QITSK Description wing-head screw 3-mm tamper-resistant double-bit Bulletin: Q41Y Brass Insert Kit Four M5 self-tapping brass inserts screw into molded pads in bottom of enclosure. Inserts have M3 internal thread. Catalog Number QBIK Bulletin: Q41Y Panel Depth Fitting Panel Depth Fitting attaches to corner molded rails of enclosure to facilitate full-range front-toback panel adjustment. Package includes four polyamide fittings and plated screws. Use on all QLINE I enclosures. Catalog Number QIPDF Bulletin: Q41Y Swing Panel Adjustable-depth aluminum swing panels, for use in QLINE I polycarbonate enclosures, provide a convenient way to install controls and instruments near enclosure body opening while providing access and security. Suitable applications include water, pulp and paper, petroleum and chemical processing, food, packaging and pharmaceutical applications. Bulletin: Q41Y Catalog Number QIHFP22A QIHFP23A QIHFP32A QIHFP42A QIHFP33A QIHFP43A QIHFP63A QIHFP64A 310 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE Panel Size DxE mm/in. 186 x 180 7.32 x 7.09 186 x 280 7.32 x 11.02 286 x 180 11.26 x 7.09 386 x 180 15.20 x 7.09 286 x 280 11.26 x 11.02 386 x 280 15.20 x 11.02 586 x 280 23.07 x 11.02 586 x 380 23.07 x 14.96 Fits Enclosure Size A x B mm/in. 200 x 200 7.87 x 7.87 300 x 200 11.81 x 7.87 300 x 200 11.81 x 7.87 400 x 200 15.75 x 7.87 300 x 300 11.81 x 11.81 400 x 300 15.75 x 11.81 600 x 300 23.62 x 11.81 600 x 400 23.62 x 15.75 Hinged Side of Enclosure 200 200 300 400 300 400 600 600 EQUIPMENT PROTECTION Hinge Kit Hinge Kit includes two polyamide hinges, eight M4 self-tapping plated screws, eight flat washers and drilling template. Use on all QLINE I enclosures. Hinge Kit meets Type 4 requirements. Three hinges required for 600-mm sides. Catalog Number QIHK Bulletin: Q41Y Mounting Bracket Kit Mounting Bracket Kit has four polycarbonate brackets and four M3 self-tapping, plated screws. Kit is field-installable. Use on all QLINE I Enclosures. Maintains listed ratings for enclosure. Catalog Number QIMFK Bulletin: Q41Y Hardware Kit Hardware Kit includes four polyamide cover screws and four self-tapping, plated panel screws. This kit is offered as a replacement kit for lost or damaged hardware originally furnished with the enclosure. Catalog Number QIHK424 Description 42-mm screws 3 Bulletin: Q41Y Extension Rings Extension rings can be added to QLINE I enclosures to provide additional 50-mm to enclosure depth. Extension rings are polycarbonate and cannot be used with quick-release latches. Bulletin: Q41Y Panels Catalog Number Q2020EXTI Q3020EXTI Q3030EXTI Q4020EXTI Q4030EXTI Q6030EXTI Q6040EXTI Bulletin: Q41Y Catalog Number Q2020PI Q3020PI Q3030PI Q4020PI Q4030PI Q6030PI Q6040PI EQUIPMENT PROTECTION Use with Enclosure Catalog Number Beginning With Q2020 Q3020 Q3030 Q4020 Q4030 Q6030 Q6040 PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Panel Size D x E (mm) 160 x 160 260 x 160 260 x 260 360 x 160 360 x 260 560 x 260 560 X 360 Panel Size D x E (in.) 6.30 x 6.30 10.24 x 6.30 10.24 x 10.24 14.17 x 6.30 14.17 x 10.24 22.05 x 10.24 22.05 x 14.17 Non-Metallic 311 Polycarbonate and ABS QLINE I 3 Polycarbonate and ABS QLINE I QLINE I, EMC, Type 4X APPLICATION The largest-size enclosures in the QLINE EMC series, the screwcover QLINE I protects larger controls from electromagnetic interference in corrosive environments. SPECIFICATIONS • • • • • • INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 12, 13 IEC 60529, IP66 • • •  ody is impact-resistant polycarbonate B Polycarbonate material is easily punched, drilled, filed or sawed EMC coating in base and cover Gasket of silver/silicone Mounting holes molded directly under cover screws Molded internal pads for mounting optional panels, rails and other components Molded internal rails for mounting adjustable depth panel kit S crews provided for mounting optional panel Easily removable covers attached to body with strong, durable polyamide cross-point cover screws FINISH Enclosure material is RAL 7035 light gray outside. Optional panels are conductive steel. Bulletin: Q41EM Standard Product  Catalog Number Q202013PCEMC Q302013PCEMC Q402013PCEMC AxBxC mm/in. 200 x 200 x 123 7.87 x 7.87 x 4.84 300 x 200 x 123 11.81 x 7.87 x 4.84 400 x 200 x 123 15.75 x 7.87 x 4.84 External Dimensions LxW mm/in. 200 x 200 7.87 x 7.87 300 x 200 11.81 x 7.87 400 x 200 15.75 x 7.87 Internal Dimensions AxBxC mm/in. 188 x 188 7.40 x 7.40 288 x 188 11.34 x 7.40 388 x 188 15.28 x 7.40 Panel Q2020PI Q3020PI Q4020PI Panel Size DxE mm/in. 160 x 160 6.30 x 6.30 260 x 160 10.24 x 6.30 360 x 160 14.17 x 6.30 Mounting GxH mm/in. 180 x 180 7.09 x 7.09 280 x 180 11.02 x 7.09 380 x 180 14.96 x 7.09 F mm/in. 115 4.53 115 4.53 115 4.53 P mm/in. 150 5.91 150 5.91 150 5.91 Q mm/in. 150 5.91 250 9.84 350 13.78 R mm/in. 140 5.51 140 5.51 140 5.51 S mm/in. 140 5.51 240 9.45 340 13.39 T mm/in. 120 4.72 120 4.72 120 4.72 U mm/in. 110 4.33 210 8.27 310 12.20 Y mm/in. 100 3.94 100 3.94 100 3.94 Z mm/in. 100 3.94 200 7.87 300 11.81 Purchase panels separately. 312 Non-Metallic SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION 3 EQUIPMENT PROTECTION PH 763.422.2211 • FAX 763.422.2600 • pentairprotect.com Non-Metallic 313 Polycarbonate and ABS QLINE I