Nomad Prime

Transcript

Nomad Prime Portable LED Area-Spot Light Owner’s Manual P/N P/N P/N P/N P/N P/N P/N 200-800 200-811 200-812 200-813 200-814 200-818 200-819 Prime Prime 395nm Prime 470nm Prime 495nm Prime 532nm Prime 850nm Prime 940nm Please read the below before using your Nomad® as it relays beneficial operating and safety information. Table of Contents 1. INTRODUCTION a. Overview b. Features c. Physical Characteristics d. Electrical Characteristics e. Product Durability, Environmental Constraints & Certifications 2. SETUP a. Itemized Description b. Unpacking the Nomad® c. Charging the Battery and Running the Nomad® from its Internal Batteries d. Charge Status e. Run the Nomad® While Plugged into the AC Adaptor or the 12VDC Cigarette Lighter cord f. Setup Nomad® for Use 3. OPERATION a. Operational Modes b. Performance/Battery Life 4. PACK AND STORE 5. MAINTENANCE 6. ACCESSORIES & REPLACEMENT PARTS 7. WARNINGS 8. WARRANTY AND CUSTOMER CARE a. Nomad® Warranty b. How to Arrange for Service Nomad Prime Owners Manual 11 14 11.9.2015 1 1. INTRODUCTION Electrical Characteristics: Overview: • Key Features: • • • • • • • • Portable rechargeable quick deployment combination LED Area light and Spotlight providing up to 4000 torch lumens. Telescopes up to approximate 8ft tall as a tripod light and can fold into a 33" tube for easy transport. Attach / detach diffuser lens to switch between area light and spotlight. Powered by internal Li-ion battery and requires no generator. Designed for use in Fire, Rescue, EMS, Industrial, Law Enforcement, SWAT (command post), Military, Video, Photography and much more. • • • • • • • Can be used as Spotlight or Area Light a. 8° Spotlight: i. Maximum Beam Distance: 3,356ft / 1,023m per ANSI-FL1 b. 120° Area Light: i. Diffuser Lens used to provide Flood Lighting Deploys in under 20 seconds Telescoping, Tilting & Rotating Head a. Telescopes up to 98” / 2,483mm b. Tilts upward 90° or downward 45° c. Can rotate approximately 340° Portability a. Folds to the size of a poster-tube for carry and storage b. Legs can be quickly deployed or stowed i. Each leg extends individually to allow level placement on uneven terrain Operational Modes: a. P/N 200-800 only - 4 modes b. All other Prime models - 3 modes Power/Mode Switch located at base of light Concealed D-Ring/chain attachment allows optional anchoring for increased stability. Light Intensity Range – Lumens Maximum 4,000 Minimum 500 Rechargeable Lithium-Ion 146 WH battery system Nomad® electronics include battery charger Operating Time: 3-24 hours (varies by mode) Recharge Time: 5 hours AC or DC charge / drive 12VDC- 9.0ft / 2.75m 46 Watt Power Consumption Charge Power Requirement= 80 Watt o 6 Amps at 12VDC o 0.7 Amps at 115VAC The Nomad® Prime can be used as a giant flashlight as it is designed to be able to remain ON as it is being carried. Product Durability, Environmental Constraints & Certifications: -EMC -LVD IPX-7 • • Meets NFPA 1971-2007 Fire Resistant Requirements: 500°F / 260°C for 30 minutes Operates in temperatures varying from 14°F (-10°C) to 300°F (149°C) o In Wind Advisory conditions, attach a sand bag, or equivalent, to the underside D-Ring for increased stability ( Lithium-Ion battery to UL1642 , UL Recognized Component) Physical Characteristics: • Combination of nylon 66 body with 6061-T6 aluminum head • Stainless steel telescoping tube Length: 34.4” / 874mm Dimensions – Diameter: 4.6” / 117mm Cylindrical Weight 18lbs / 8.2kg Maximum Height 8ft / 2,483mm • Three Leg Base o Built-in level and leg adjustments for uneven terrain o The tips of the legs will fit within a 41” / 1,041mm diameter circle • Light Head o 6 white LEDs (color temperature: 5800 K) Nomad Prime Owners Manual 11 14 11.9.2015 2 2. SETUP Itemized Description: Carry Strap is shown at middle right of page, attached to Battery Compartment. A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. P. Q. R. S. Battery Compartment Charge Plug D-Ring with Chain Diffuser Lens Diffuser Retainer Clip Leg Leg Extender Leg Locks Level Bubble Level Tabs Lid Light Head Power/Mode Switch Side-to-Side Adjustment Sliding Cap Telescope Tightening Rings (knurled for grip) Up-Down Adjustment 3M Reflective (Yellow) Safety Tape, optional Unpacking the Nomad®: Make sure the following items are present: • Nomad® Prime with Carry Strap • AC Adaptor, Tape, 12VDC Cord Set & AC power cord, 3M Reflective (Yellow) Safety Strips AC power cord is Universal to NEMA 5-15P, 3 prong for USA. AC Adaptor • 12VDC Lighter AC cord Nomad® Accessories Bag Fits all charging accessories when storing • Owner’s Manual Nomad Prime Owners Manual 11 14 11.9.2015 3 Charging the Battery and Running the Nomad® from its Internal Batteries: Fully recharges in 5 hours. AC Adaptor & Power Cord 1. Connect the AC cord to the AC Adaptor. 2. Plug the DC connector (part of the Adaptor) into the Nomad’s socket. 3. AC power cord is Universal to NEMA 5-15P, 3 prong for USA and will work with a power range of 100 – 240VAC, 50/60 Hz. 4. The AC cord can be replaced for each respective country's approved AC connector. Run the NOMAD® While Plugged into the AC Adaptor or the 12VDC Cigarette Lighter Cord: The Nomad® can be driven for longer periods using either the AC Adaptor, or the DC cord. As long as the unit is plugged into either power source, the light can be turned on, and driven in this manner. • Note: Continuously charging (leaving the Nomad® plugged in) will not damage the electronics. • The batteries are not being charged if the light is ON in any mode. The Nomad® Prime must be OFF. As soon as the light is turned off, the power source will automatically begin to charge the Nomad® Lithium Batteries. Note: The Nomad® light will NOT accept a 24VDC input. DC Cigarette Lighter Cord (12VDC) The Prime can be charged in this manner as well. Battery Charging Indicator When you plug in the AC Adaptor, a small GREEN LED will come on, near the DC cord end. This indicates that the Adaptor has power, and that it is functional. As you plug the Adaptor into the Nomad®’s socket, a GREEN INDICATOR LED will come on, above the socket. A BLINKING GREEN LED indicates that the batteries are being charged with external Power. When the NOMAD® is completely charged, the Green LED will stop blinking and stay ON. Battery Life Indicator Once the battery is charged, the charger removed, and the light has been turned ON the status indicator at the base of the Nomad® indicates: Color Description Green Battery charge is full and adequate for the selected intensity. Orange Red Power is at mid-point. Consider lowering intensity if extended use is needed. The Nomad® will soon run out of power. Lower the intensity and/or charge the Nomad® promptly. Nomad Prime Owners Manual 11 14 11.9.2015 4 Setup Nomad® for Use: • Hold light by its strap, or set on flat surface. Open Lid, and move Sliding Cap upwards to free legs. • Unfold legs & lock each of them. • Adjust light head angle by turning it to the desired direction and tighten. • Elevate the telescoped light head to desired height, and tighten the knurled rings (clock-wise). Note: To reposition the light, either turn the light head or move the feet. DO NOT TRY TO TURN THE TELESCOPING POLES AGAINST EACH OTHER. This can cause permanent damage to the tripod. • Level the Nomad® 1. Open the Lens cover and move sliding cap to reveal light head. 2. Pull the light head out of its enclosure, 4”-6” enough to look inside. 3. View the bubble level, as shown here. • Raise the Light Head from inside the battery compartment. • • • Adjust each leg individually, as necessary. Lift the leg off the ground, and press on both tabs to allow extensions to come out. Retract in the same manner. • In case of heavy wind or weather conditions, attach a sand bag, or equivalent weight, to the concealed D-Ring/chain. • Your Nomad® Prime is ready for use! For Area Lighting, secure the diffuser lens within the 3 Diffuser Retainer Clips. For Spot Light, un-install the diffuser lens, as such: Shown with 3M reflective (Yellow) Safety Tape Strips installed on each leg. Nomad Prime Owners Manual 11 14 11.9.2015 5 3. OPERATION • Lift spring loaded tab cover to access mode switch. • Operational Modes: • • For P/N 200-800, the Operational Modes are as follows: Approximate Mode Description Lumens 1 Low 500 2 Medium 1,300 3 High 4,000 4 Blinker 4,000 (1.5 Hz/Sec) For all other Nomad® models, Modes are the respective wavelength in Low, Medium and High output (total of 3 modes). Performance/Battery Life: Once the Mode has been selected, the Nomad® is fully operational. Mode Description Battery Life* 1 Low 24 hrs 2 Medium 9 hrs 3 High 3 hrs 4** Blinker 10 hrs *Battery Life depends upon: 1. Battery age (Lithium batteries tend to degrade by 10% of their total charge each year. 2. Ambient conditions. **P/N 200-800 Only NOTES: • If the AC adaptor or DC cord are installed while the Nomad® is ON, the battery life will be preserved. • If the AC adaptor or DC cord is connected to external power and the Nomad® is OFF, the external power will charge the battery. • If the Nomad® is turned ON, the battery will stop charging and the external power is redirected to turn the Nomad® ON. Push down on the Level Tabs until each leg extension is fully retracted. Press on the Leg Lock, and fold leg up and into the enclosure. Repeat for all three legs. Move Sliding Cap over legs, and close lens cover. WARNINGS WHEN STORING The Nomad® depends on “ambient air” for cooling of its light head. After being on for a while, the head will become hot to the touch. The elapsed time will depend exclusively on the ambient air temperature. The warmer it is, the faster the head’s temperature will increase. • When it is time to put the Nomad® away, either wait for the unit to cool off (usually 10-30 min) or protect your hands (with work gloves or cloth) as the light head is pushed down into its housing cavity. PLEASE NOTE THAT YOU WILL NOT DAMAGE THE UNIT BY PUTTING IT AWAY WHILE THE HEAD IS HOT. 5. MAINTENANCE Keep your Nomad® Fully Charged • Maintain the light fully charged at all times, so that it is ready for use in the event of an emergency. • Remember that the full re-charge time is roughly 5 hours (summer, warm ambient) or 6 hours (winter, cold ambient). • If used outdoors in cold weather for an extended period of time, allow the Nomad® to warm up to above 10˚C/50˚F before charging. • Note that Lithium-Ion Batteries have a 500 full charge life cycle (CC followed by a CV cycle)*. After this number of cycles, you will begin to see a proportionate decreased usage time between charges. 4. PACK AND STORE • • • Turn power OFF by pressing the Power/Mode switch until the light is no longer ON. Lower the telescope by un-tightening the knurled rings, and push the head into the enclosure. • Make sure to realign the swinging head so it fits inside the housing slots. • Be sure to re-install the diffuser lens. If used, disconnect the AC Adaptor from the Nomad®. • *CC = Constant Current charge (fast rate) CV = Constant Voltage charge (slow rate) The Nomad’s Lithium-Ion Batteries have a top-off or micro-charge life of around 1,200 cycles or more (CV only). If the Nomad® is un-used for 45 to 60 days, plug in the AC Adaptor for (half) 1/2 hour to bring the batteries back up to peak charge. Keep your Nomad® clean & free of dirt • As needed, wash your Nomad® using a soft washcloth, clean water and a mild soap. When done, pat the unit dry with a soft cloth. Nomad Prime Owners Manual 11 14 11.9.2015 6 Keep out of reach of children 6. ACCESSORIES & REPLACEMENT PARTS Item Nomad® Prime AC Adaptor/DC Cord Set Prime Battery Kit Replacement Carry Strap Nomad® Mount Clamps, set of 2 Nomad® Carrying Bag Nomad® Accessories Bag 3M Reflective (Yellow) Safety Tape Strips, set of 3 3M Reflective (Yellow) Stickers for Nomad Head Visibility, set of 3 Nomad® Series Carrying Case P/N 600-120 600-200-800 51-056 850-800 850-200-800 600-250 70-125 70-126 80-003 7. WARNINGS IMPORTANT FoxFury, LLC is not responsible for the incorrect use of any FoxFury Lighting product. • Lights are strong enough to cause damage to the human eye. • Do not stare into LEDs for long periods of time or from a close range (less than 2 feet). • FoxFury, LLC is not responsible for any injury or damage caused during the use of this product. • Do not use under the influence of drugs or alcohol. WHEN STORING THE NOMAD®: The NOMAD® depends on “ambient air” for cooling of its light head. After being on for a while, the head will become hot to the touch. The elapsed time will depend exclusively on the ambient temperature. The higher the ambient temperature is, the faster the head’s temperature will increase. • When it is time to put the NOMAD® away, either wait for the unit to cool off (usually 10-30 min) or protect your hands (with work gloves or cloth) as the light head is pushed down into its housing cavity. • DO NOT STOW THE NOMAD® WITH THE LIGHT ON AND LEAVE IT IN THIS STATE. o Prolonged use without ventilation could cause permanent damage to LEDs. DO NOT CHARGE THE NOMAD® INSIDE ITS CARRYING BAG OR OTHERWISE TIGHT COMPARTMENT. • Doing so can cause reduced efficiency and/or battery life. REPOSITIONING THE NOMAD®: • To reposition the light, either turn the light head or move the feet. DO NOT TRY TO TURN THE TELESCOPING POLES AGAINST EACH OTHER. This can cause permanent damage to the tripod. UV LIGHT P/N 200-811 only AVOID DIRECT EYE EXPOSURE TO UV LIGHT. • • • The UV LED during operation radiates intense UV light. Do not look directly into the UV light during operation, even for a brief period. This can be harmful to the eyes due to the intensity of the UV light. When viewing with the UV light, please use UV filtered glasses to avoid eye damage from the UV light. Infrared (IR) Light P/N 200-818 & 200-819 only AVOID STARING AT THE LIGHT. While invisible to the human eye, it can cause long term damage. 8. WARRANTY & CUSTOMER CARE LIMITED WARRANTY: FoxFury Limited Warranty & Customer Care Information FoxFury, LLC (“FoxFury”) warrants to the purchaser of this product (“Buyer”) that for a period of two years following purchase, this product will be free from defects in material and workmanship and will function in substantial compliance with FoxFury’s written specifications for this product as specified in the instruction manual or on FoxFury’s website located at www.foxfury.com. Buyer’s exclusive remedy shall, in any case, be limited, at FoxFury’s election, to: A) repair or replacement of the defective product; or B) refund of the purchase price for this product. THE FOREGOING WARRANTY IS THE ONLY WARRANTY MADE BY FOXFURY WITH RESPECT TO THIS PRODUCT. TO THE EXTENT ALLOWED BY APPLICABLE LAW, THERE ARE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND BY FOXFURY, EXPRESS OR IMPLIED, WITH RESPECT TO THE CONDITION OR PERFORMANCE OF THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This limited warranty shall not apply if this product is not stored, handled, installed or used in strict accordance with manufacturer’s specifications and instruction manuals, or which has been subject to misuse, alteration, negligence or accident. 1. The damaged part or product must be returned to FoxFury PRIOR TO any repair or replacement. Shipping costs are the responsibility of the claimant. 2. You must obtain a return authorization (RMA) number from FoxFury prior to returning products. FoxFury is not responsible for any damage incurred while in transit. 3. Buyer will be required to show proof of purchase – No Exceptions. 4. Any modifications to the light, cable or battery pack automatically voids all warranties on this product. Nomad Prime Owners Manual 11 14 11.9.2015 7 All warranty inquiries should be directed to FoxFury’s Customer Service Department to handle all warranty and repair-related inquiries. TO THE EXTENT ALLOWED BY APPLICABLE LAW: (A) IN NO EVENT, WHETHER DUE TO BREACH OF WARRANTY HEREUNDER OR ANY OTHER CAUSE WHATSOEVER, SHALL FOXFURY BE LIABLE FOR OR OBLIGATED IN ANY MANNER TO PAY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, COST OF SUBSTITUTE PRODUCTS AND PERSONAL INJURY OR PROPERTY DAMAGE, WHETHER SUCH CLAIM IS BASED ON CONTRACT OR TORT OR ANY OTHER THEORY OF LAW, AND (B) FOXFURY’S ONLY DUTIES IN CONNECTION WITH THE SALE OF THIS PRODUCT SHALL BE TO HONOR THE LIMITED WARRANTY SET FORTH HEREIN. TO THE EXTENT THAT THIS LIMITED WARRANTY IS INCONSISTENT WITH APPLICABLE LAW, THIS STATEMENT SHALL BE DEEMED MODIFIED TO BE CONSISTENT WITH SUCH APPLICABLE LAW FoxFury, LLC Oceanside, CA 92056 USA Toll-Free: 844-FOXFURY Tel: 760.945.4231 Fax: 760.433.3650 Email: [email protected] www.FoxFury.com All FoxFury products are designed in Oceanside, CA. All FoxFury products are manufactured with the highest quality USA and foreign parts. Products are assembled in either FoxFury’s controlled plant in Asia or the USA, under strict quality control. Nomad Prime Owners Manual 11 14 11.9.2015 8