Non-catalog - Mini Circuits

Transcript

NON-CATALOG Surface Mount Low Pass Filter 50Ω SCLF-44 DC to 44 MHz Maximum Ratings Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C RF Power Input 0.5W max. Features • wide selection of cut-off frequencies • excellent rejection • custom models available CASE STYLE: YY161 Permanent damage may occur if any of these limits are exceeded. Applications Pin Connections INPUT 1 OUTPUT 8 GROUND • defense communications • receivers/transmitters • harmonic rejection of VCOs 2,3,4,5,6,7 Electrical Specifications­ Parameter Pass Band Outline Drawing Stop Band F# Frequency (MHz) Min. Typ. Max. Unit Insertion Loss DC-F1 DC-44 — — 1.0 dB Freq. Cut-Off F2 48.5 — 3.0 — dB VSWR DC-F1 DC-44 — 1.3 — :1 Rejection Loss F3-F4 F4-F5 59-65.5 65.5-420 20 40 — — — — dB dB VSWR F3-F5 59-420 — 18 — :1 Typical Frequency Response Electrical Schematic 40 ATTENUATION (dB) PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A 0.75 19.05 B 0.38 9.65 C 0.28 7.11 D 0.01 0.25 E 0.05 1.27 F 0.02 0.51 H 0.075 1.91 J 0.6 15.24 K 0.45 11.43 M 0.47 11.94 N 0.1 2.54 P wt 0.15 grams 3.81 1.60 Demo Board MCL P/N: TB-187+ Suggested PCB Layout (PL-049) G 0.2 5.08 R F IN R F OUT 20 3 1 DC F1 F2 F3 FREQUENCY F4 F5 Typical Performance Data Frequency (MHz) Insertion Loss (dB) _ x 0.50 10.00 20.00 40.00 44.00 46.00 48.50 50.00 56.00 59.00 62.00 65.00 65.50 100.00 200.00 300.00 420.00 500.00 600.00 700.00 800.00 0.03 0.07 0.12 0.36 0.52 0.92 3.16 6.03 21.84 30.18 39.28 51.71 54.80 62.05 56.52 52.40 57.26 23.28 39.26 51.96 8.66 Return Loss (dB) σ 0.00 0.01 0.00 0.02 0.02 0.12 0.45 0.64 0.84 0.95 1.26 2.71 3.59 3.71 3.69 2.98 1.51 1.04 1.89 4.10 0.78 49.30 26.00 28.39 22.17 26.21 13.84 4.71 2.29 0.35 0.24 0.19 0.17 0.16 0.13 0.18 0.21 0.26 0.72 0.29 0.36 7.16 SCLF-44 INSERTION LOSS at RF level of 0 dBm 60 60 RETURN LOSS (dB) INSERTION LOSS (dB) 70 SCLF-44 RETURN LOSS 50 40 30 20 10 at RF level of 0 dBm 50 40 30 20 10 0 0 0 1 10 100 1000 0 1 10 100 1000 FREQUENCY(MHz) FREQUENCY(MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. F M158359 SCLF-44 170313 Surface Mount Low Pass Filter SCLF-44 Typical Performance Data INSERTION LOSS (dB) FREQ. (MHz) 0.5 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 41.0 42.0 43.0 44.0 45.0 46.0 47.0 48.0 48.5 49.0 50.0 51.0 52.0 53.0 54.0 55.0 56.0 57.0 58.0 59.0 60.0 61.0 62.0 65.0 65.5 70.0 80.0 90.0 100.0 200.0 300.0 400.0 420.0 500.0 600.0 700.0 800.0 900.0 1000.0 INPUT RETURN LOSS (dB) OUTPUT RETURN LOSS (dB) @ -40˚ C @ +25˚ C @ +85˚ C @ -40˚ C @ +25˚ C @ +85˚ C @ -40˚ C @ +25˚ C @ +85˚ C 0.01 0.03 0.04 0.04 0.05 0.05 0.07 0.09 0.08 0.11 0.11 0.12 0.15 0.19 0.28 0.31 0.36 0.41 0.51 0.68 0.94 1.41 2.15 2.65 3.27 4.82 6.71 8.92 11.27 13.73 16.27 18.80 21.40 24.00 26.65 29.32 32.09 34.98 44.76 46.74 66.20 63.31 69.54 62.20 58.24 53.53 68.12 59.40 23.22 41.48 55.16 7.20 17.14 21.31 0.02 0.04 0.05 0.05 0.06 0.07 0.07 0.08 0.09 0.12 0.12 0.14 0.17 0.22 0.31 0.34 0.40 0.45 0.56 0.74 1.03 1.52 2.31 2.83 3.47 5.04 6.97 9.16 11.53 13.98 16.50 19.03 21.59 24.23 26.87 29.56 32.34 35.22 44.99 47.06 64.57 63.18 69.16 62.34 59.05 53.93 69.35 59.15 24.01 41.80 55.82 7.34 17.38 21.45 0.03 0.04 0.05 0.06 0.06 0.07 0.08 0.10 0.10 0.12 0.13 0.16 0.20 0.25 0.35 0.39 0.44 0.52 0.63 0.84 1.16 1.70 2.55 3.10 3.77 5.39 7.37 9.58 11.95 14.39 16.92 19.45 22.03 24.64 27.30 29.97 32.76 35.68 45.64 47.76 63.23 63.69 69.32 62.38 58.33 54.22 72.20 58.78 24.64 41.66 54.83 7.55 17.41 21.37 46.57 31.89 29.50 27.69 26.26 25.13 24.23 23.52 22.96 21.99 23.69 27.30 27.01 26.40 29.75 27.57 24.25 20.70 17.27 14.05 11.05 8.32 6.00 5.00 4.13 2.75 1.80 1.22 0.83 0.62 0.47 0.39 0.32 0.28 0.24 0.22 0.20 0.19 0.16 0.16 0.13 0.10 0.09 0.09 0.10 0.10 0.10 0.11 0.50 0.14 0.23 3.72 0.33 0.18 46.07 32.10 29.70 27.89 26.46 25.34 24.43 23.72 23.14 22.11 23.67 27.06 27.21 26.91 30.22 27.59 24.00 20.35 16.93 13.71 10.76 8.08 5.81 4.85 4.01 2.68 1.78 1.21 0.85 0.64 0.49 0.41 0.34 0.30 0.27 0.24 0.22 0.21 0.18 0.18 0.14 0.12 0.10 0.10 0.11 0.12 0.13 0.14 0.47 0.17 0.28 3.73 0.39 0.25 45.22 32.38 30.00 28.20 26.80 25.66 24.76 24.03 23.47 22.43 23.92 27.06 27.24 27.45 31.12 27.78 23.82 20.05 16.55 13.34 10.39 7.78 5.58 4.65 3.85 2.60 1.75 1.22 0.87 0.66 0.53 0.44 0.39 0.34 0.31 0.28 0.25 0.23 0.20 0.20 0.16 0.14 0.13 0.13 0.14 0.15 0.17 0.18 0.50 0.21 0.34 3.80 0.45 0.30 46.82 31.78 29.39 27.57 26.14 25.01 24.10 23.38 22.79 21.73 23.15 26.26 26.55 26.64 28.50 26.41 23.49 20.37 17.20 14.15 11.21 8.54 6.20 5.21 4.32 2.94 1.97 1.36 0.98 0.74 0.58 0.47 0.40 0.34 0.31 0.28 0.25 0.23 0.19 0.18 0.14 0.10 0.08 0.08 0.07 0.09 0.10 0.11 0.57 0.13 0.19 3.48 0.41 0.19 46.47 32.01 29.59 27.76 26.33 25.20 24.28 23.56 22.96 21.82 23.10 26.04 26.85 27.28 28.81 26.39 23.31 20.07 16.91 13.83 10.95 8.31 6.04 5.07 4.22 2.89 1.97 1.37 0.99 0.77 0.62 0.50 0.44 0.38 0.35 0.32 0.29 0.27 0.22 0.22 0.17 0.13 0.12 0.11 0.10 0.12 0.13 0.14 0.56 0.16 0.23 3.79 0.46 0.24 45.65 32.18 29.78 27.95 26.53 25.40 24.48 23.75 23.16 21.98 23.20 25.99 27.05 28.12 29.15 26.25 22.98 19.71 16.49 13.45 10.58 8.00 5.81 4.88 4.07 2.80 1.93 1.37 1.01 0.79 0.64 0.53 0.45 0.40 0.36 0.33 0.31 0.29 0.25 0.23 0.19 0.14 0.11 0.11 0.09 0.11 0.12 0.13 0.48 0.17 0.24 3.90 0.48 0.26 REV. X2 SCLF-44 101111 Page 1 of 2 Surface Mount Low Pass Filter SCLF-44 Typical Performance Data GROUP DELAY (nsec) FREQ. (MHz) 0.1 10 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 @ -40˚ C @ +25˚ C @ +85˚ C 14.55 13.34 13.39 13.92 13.87 14.30 14.43 14.50 14.89 15.34 15.44 15.55 15.98 16.39 16.72 17.03 17.53 17.84 18.31 19.09 19.65 20.31 20.70 22.08 23.09 24.20 25.62 27.24 29.15 31.39 34.24 37.70 41.41 45.11 47.94 48.11 46.17 42.43 37.49 32.33 27.84 24.73 22.39 18.90 16.57 15.47 13.32 12.70 10.46 10.25 9.94 8.34 5.60 7.63 14.09 13.06 13.13 14.13 13.97 14.24 14.33 14.41 15.01 15.21 15.39 15.68 15.89 16.44 16.65 16.97 17.76 17.97 18.41 18.84 19.65 20.31 20.94 22.08 23.04 24.30 25.52 27.16 29.36 31.60 34.68 37.83 41.69 44.89 47.84 47.94 45.34 41.83 36.84 31.76 28.38 24.72 21.90 19.18 17.35 15.42 13.61 12.35 10.27 9.21 6.41 6.99 3.31 8.94 14.52 12.99 13.28 13.81 14.03 14.31 14.36 14.43 14.88 15.15 15.37 15.85 15.97 16.54 16.73 17.04 17.49 18.04 18.56 19.12 19.65 20.41 20.86 22.32 23.02 24.51 25.83 27.40 29.25 31.85 34.84 38.37 42.00 45.39 47.65 47.68 44.86 40.91 36.22 31.03 27.67 23.97 21.41 19.05 17.02 15.09 13.75 12.40 10.79 9.84 8.88 3.45 2.19 18.57 REV. X2 SCLF-44 101111 Page 2 of 2 Surface Mount Low Pass Filter SCLF-44 Typical Performance Curves INSERTION LOSS vs. TEMPERATURE 0 10 20 30 (dB) 40 50 60 70 -40°C @ Input Power = 0 dBm 80 +25°C @ Input Power = 0 dBm 90 +85°C @ Input Power = 0 dBm 100 0 100 200 300 400 500 600 Frequency (MHz) 700 800 900 1000 INPUT RETURN LOSS vs. TEMPERATURE 0 5 -40°C @ Input Power = 0 dBm 10 +25°C @ Input Power = 0 dBm 15 +85°C @ Input Power = 0 dBm (dB) 20 25 30 35 40 45 50 0 1 10 Frequency (MHz) 100 1000 100 1000 OUTPUT RETURN LOSS vs. TEMPERATURE 0 5 -40°C @ Input Power = 0 dBm 10 +25°C @ Input Power = 0 dBm 15 +85°C @ Input Power = 0 dBm (dB) 20 25 30 35 40 45 50 0 1 10 Frequency (MHz) REV. X2 SCLF-44 101111 Page 1 of 2 Surface Mount Low Pass Filter SCLF-44 Typical Performance Curves Group Delay 0 Group Delay (nsec) 5 10 15 20 25 30 -40°C @ Input Power = 0 dBm 35 +25°C @ Input Power = 0 dBm 40 +85°C @ Input Power = 0 dBm 45 50 0 5 10 15 20 25 30 35 40 Frequency (MHz) 45 50 55 60 65 70 REV. X2 SCLF-44 101111 Page 2 of 2 Case Style YY YY101 YY109 YY161 Outline Dimensions PCB Land Pattern Suggested Layout Tolerance to be within ±.002 CASE# A B C .38 (9.65) .20 (5.08) .20 (5.08) .28 (7.11) YY101* YY109* .75 (19.05) YY161 D .010 (0.25) E .050 (1.27) F .020 (0.51) G .200 (5.08) H .075 (1.91) J K L M .600 (15.24) .450 (11.43) .720 (18.29) .450 (11.43) ------- .470 (11.94) .740 (18.80) .470 (11.94) N P WT. GRAM S Q 1.6 .100 (2.54) .150 (3.81) .148 (3.76) 1.6 1.6 Dimensions are in inches (mm). Tolerances: 2 Pl. + .01; 3 Pl. + .005 Notes: 1. 2. 3. 4. Case material: Plastic. Termination finish: For RoHS Case Styles: Tin plate over Nickel plate. For RoHS-5 Case Styles: Tin-Lead plate. Special Tolerances: Termination thickness + .003 inch. * Denotes: For SCM mixers, long termination version (case YY109) is available upon request, consult factory. To order short termination version (case YY101) add -NL suffix. 98-YY Rev.: K (03/03/17) M160509 File: 98-YY This document and its contents are the property of Mini-Circuits. Sheet 1 of 1 Tape & Reel Packaging TR-F5 Tape Width, mm 32 Device Cavity Pitch, mm 16 Reel Size, inches 13 Devices per Reel 500 Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: www.minicircuits.com/pages/pdfs/tape.pdf 98-TR-F5 Rev.: A (08/14/09) M124108 File: 98-TR-F5.doc This document and its contents are the property of Mini-Circuits. Sheet 1 of 1 Mini-Circuits Environmental Specifications ENV02T1 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -40° to 85°C Ambient Environment Individual Model Data Sheet Storage Temperature -55° to 100° C Ambient Environment Individual Model Data Sheet Humidity 90 to 95% RH, 240 hours, 50°C MIL-STD-202, Method 103, Condition A, Except 50°C and end-point electrical test done within 12 hours Thermal Shock -55° to 100°C, 100 cycles MIL-STD-202, Method 107, Condition A-3, except +100°C Solder Reflow Heat Sn-Pb Eutetic Process: 225°C peak Pb-Free Process 245° - 250°C peak J-STD-020, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability 10X Magnification J-STD-002, 95% Coverage Vibration (High Frequency) 20g peak, 10-2000 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-202, Method 204, Condition D Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-202, Method 213, Condition A Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25°C; terpene defluxer at 25°C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63°C to 70°C MIL-STD-202, Method 215 ENV02T1 Rev: B 02/25/11 M130240 File: ENV02T1.pdf This document and its contents are the property of Mini-Circuits. Page: 1