Transcript
One Size Fits Most Applications
November 2008
Universal this and universal that. Everything can’t be universal. But one product that is universal and that you will be glad you had on your truck or in your toolbox is our 21D64-2 Universal Ignitor Upgrade Kit. It’s the heating season and no-heat calls are urgent...and fast solutions can be critical. No heat due to a broken ignitor should be an easy service call. But what if it’s late in the day and you can’t find the correct silicon carbide ignitor replacement. OK – enough with the drama – you get the picture. You are prepared because you carry the 21D64-2 on your truck. You just made a customer very happy, made a quick service call, and now you’re on to the next urgent job. Nitride ignitors are proven over time to be the best and most reliable ignitor available. The 21D64-2 Upgrade Kit includes a premium 120-Volt Nitride Ignitor, universal brackets, wire nuts, illustrated instructions and is backed by a 3-year warranty. In other words, everything needed to quickly convert a silicon carbide ignitor to premium nitride ignition in most applications except sealed combustion and direct sense ignitors. Next time you need to get the heat back on for a customer and you can’t get the correct silicon carbide ignitor – just reach for the 21D64-2. CLICK HERE for specification sheet and cross-reference on 21D64-2 CLICK HERE for replacement crossreference for silicon carbide ignitors
How about $100 Can you use an extra $100? We’d like your feedback on newsWiRe. Just click on the Tell Us What You Think link and let us know if you like newsWiRe or how we can improve it. We’ll enter every e-mail in a random drawing for a chance to win a $100 cash debit card. Winner will be announced next issue.
“The time we spent training on Emerson Climate products was very beneficial and I look forward to scheduling another session there.” Ken Perotta, Crescent Parts, St. Louis, MO
To set up a visit, contact your local White-Rodgers Sales Rep or click on newsWiRe e-mail and send us a note.
Tech Tip Troubleshooting mV (Millivolt) Gas Valves Each electrical connection in the heating system (thermostat, limit devices, etc.) adds resistance, as does the length of wire to the thermostat. The power generator must be capable of producing enough current to overcome the resistance and pull-in the gas valve. If the generator gets too hot from the pilot flame or main burner (more than 1400°F), it will break down the insulation inside the generator. If the connections are clean and tight and the power generator is putting out sufficient voltage — a service person would normally replace the gas valve.
[email protected]
Product Technical Support for Distributors and Contractors Digital Thermostat Programming Help/Homeowner Hotline newsWiRe Archive Contractor Branding Program
White-Rodgers is located in St. Louis, Missouri on the Emerson Headquarters Campus, near Lambert International Airport, making us easy to get to by car or plane. You are invited to set up a visit to our facilities and see our world-class product reliability and testing labs. Besides tours, we offer round-table discussions and product training for distributors and contractors on all Emerson Climate products.
Tell Us What You Think
Key Phone Numbers:
White-Rodgers.com
Plan a Visit
Current Promotions
1-888-725-9797 1-800-284-2925 Visor Card
Live Chat
