Transcript
IS O
ner of A W in me
9 0 01
NOVOFLEX DOME FIR TREE MOUNT CLIP
NOVOFLEX PANEL EDGE CLIP CABLE TIE
Novoflex Dome Fir Tree Mount Clip can securely fix cable bunches to a panel or chassis, without the need of any fixing tool. You can simply mount the clip by pushing the anchor through a plate of specified Thickness, as per table below. The anchor fits perfectly into the hole of your chassis, providing a solid, rattle-free installation. While the domed anchor blocks out any space in the hole, the saucer-shaped structure below, Seals the hole, thus providing extra protection from the outer environment (dust, water, chemicals, etc.) B 15.7
APPLICATION
Novoflex Marketing Private Limited 3B, Camac Street, Kolkata - 700016 Ph: +91 33 2226 0513, +91 33 2229 0523
ality Award
Since 1980
ISO 9001 : 2008
Internatio na l
Qu
TUV India Private Ltd.
an ric
This cable Tie comes along with an Edge-Clip. The metal teeth of the clip strongly bite into the panel (without damaging it), thus providing with a solid grip. No separate tools are required for installation. The Cable Tie can easily slide across the clip, thus adjusting its position as per your need. It is ideal for places where adhesive strips, drilling of holes, or screws cannot be used.
PEC - T
W 11.5
B 15.7
6.3
H 15.6
6.3 L 13.5
7.2
FMC - 01
12.7
FMC - 02
D 5.5
L 19
D 7.5
H 15.6
W 11.5
PEC - S
B 20
PEC - T
PEC - S
7.7 L 26.7
19
FMC - 03
Novoflex Nominal Part No. Overall length L (mm) FMC - 01 13.5 FMC - 02 19 FMC - 03 26.7
B
Plate Thickness
Push Mount Hole Dia
(mm) 0.7 - 3.0 0.8 - 7 4 - 11
D (mm) 4.5 - 5.0 6.5 - 7.0 9.5
(mm) 15.7 15.7 20
H 15.6
W
D 11
Max Cable Tie Width W (mm) 5.2 5.2 8.0
PEC - T
CABLE TIE
CLIP
Novoflex length Width Thickness Height Part No.
Width
NOVOFLEX DOME PUSH MOUNT CLIP
14 + / - 0.2
NR1
7 + / - 0.2
PEC - T PEC - S
(mm)
(mm)
H (mm)
W (mm)
(mm)
200 200
10.6 4.7
3.2 1.3
1.5 15.6
5 11 - 5
1-3 1-3
Material: Nylon 66. Standard Colour: Black PEC - T: The Cables are routed through the Top PEC - S: The Cables are routed through the Side
NOVOFLEX CABLE TIE PLUG Designed with a deep anchor, Novoflex Cable Tie Plugs can go deep into your chassis/panel and provide unmatched support. Cable Ties can then be used to secure cables.
8.0
2
B
1
10.8
9.1 + / - 0.3
5.0
APPLICATION
B
Max Panel Thickness
(mm)
3.7
A 18+ /- 0.5
T 1.3
L 200
Material: Nylon 66. Standard Colour: Black
Novoflex Dome Push Mount Clip can securely fix cable bunches to a panel or chassis, without the need of any fixing tool. You can simply mount the clip by pushing the anchor through a plate of specified Thickness, as per table below. The anchor fits perfectly into the hole of your chassis, providing a solid, rattle-free installation. While the anchor holds the cable tie Firmly to the chassis, the saucer-shaped structure below, Seals the hole, thus providing extra protection from the outer environment (dust, water, chemicals, etc.)
4.7
NR1
PMC - 01
A
Please select separately cable tie as per bundle dia of cables required by you.
6.6
B
15
9.5
8.2
W
32
L 16.9
W
2.1
PMC - 02
Max. Push Panel Novoflex Nominal B Cable Mount Thickness Part No. Overall length Tie - Width Hole Dia L W (mm) (mm) (mm) (mm) (mm)
Standard Packing
PMC - 01 PMC - 02
100 Nos 100 Nos
14.0 16.9
18.0 20.2
Material: Nylon 66. Standard Colour: Black
Tel : +919903163634
5 8
6.5 - 7.0 9.5 - 11.0
0.8 - 2.2 2.2 - 3.6
Novoflex Part No.
CTP - 01
Nominal Overall length L (mm)
Max. Cable Tie Width W (mm)
Push Hole Dia
38.6
9.5
7.5
Standard Packing
(mm)
100 Nos.
Material: Nylon 66. Standard Colour: Black
Website : www.novoflex.in
E-mail :
[email protected]
