Transcript
WinEMP Card Reader and PC Interface compact
Do you wish to configure NRI coin validators and changers using the tried and tested WinEMP PC software on site at the machine? No problem with the compact "SimLock" service tool: tool with integrated WinEMP licence card in smallest standardized ID-000-format (SIM card size) with integrated control unit for updating changer firmware (flash) with connector for all NRI validators/changers with 8-pole RJ-45 plug for connection of all E-66/A-66 and G-46.F4000 with USB PC port as laptop connection
PC (USB)
Power (12 V DC) Validators/G-46.4000 (PCB direct plug)
E-66/A-66/G-46.F4000 (RJ-45)
By the way: In the workshop the validator/changer can be powered and configured by means of the integrated power connector and a common 12-V power pack (500mA, barrel connector 5.0 x 2.1mm)!
Mobile WinEMP programming : WinEMP software (on CD-ROM or via download (www.nri24.com)) Licence Card Module "SimLock" with required WinEMP licence : Basic licence for the purpose of diagnostics and individual configuration of all NRI validators and changers (incl. acceptance band adjustment) Data block licence for updating the complete coin and device configuration using data blocks currently provided by NRI (data block download) DDL licence for customer-specific series configuration of a master device (for G-13.mft only)
WinEMP newcomers thus no longer require necessarily the NRI card reader G-19.0647 for the acceptance of WinEMP licence cards in the large ID-1-format (EC card size) and an NRI PC interface or tester, but only the compact SimLock card reader. Exception: If you do not only wish to configure the validator/changer, but also check the signal lines of coin payment systems with a parallel machine interface, you will need an additional specific NRI tester (for more information please refer to our product accessory pages at www.nri24.com)!
July, 2007/UCo-ds CRANE
•
NATIONAL REJECTORS, INC. GMBH Internet: www.nri24.com • E-mail:
[email protected]
Phone: +49 (0)4161/729-0 Fax: +49 (0)4161/729-115 D-21614 Buxtehude Zum Fruchthof 6
Subject to technical changers!
NRI WinEMP License Card Module "SimLock"
for On-Site Configuration of NRI Validators and Changers
Changer firmware update:
WinFlash2 software (on floppy disk or via download (www.nri24.com)) Licence Card Module "SimLock" If necessary, 12-V power pack (500mA, barrel connector 5.0x2.1mm) Note: You need the 12-V power pack, if you want to flash • NRI changers in the workshop or • the older NRI changers G-46.4000 on site or in the workshop.
PC (USB)
Power (12 V DC) Validators/G-46.4000 (PCB direct plug)
Subject to technical changes!
E-66/A-66/G-46.F4000 (RJ-45)
July, 2007/UCo-ds CRANE
NATIONAL REJECTORS, INC. GMBH Internet: www.nri24.com • E-mail:
[email protected]
Phone: +49 (0)4161/729-0 Fax: +49 (0)4161/729-115 D-21614 Buxtehude Zum Fruchthof 6
NRI WinEMP License Card Module "SimLock"
Use the SimLock service tool not only to configure you NRI changer, but also to keep up to date its firmware! All you need:
