Transcript
NTSC/D2 PROM-Slide®
2602ES
• Four-field storage • Ideal for Station Logo • Independent phasing The Leitch 2602ES PROM-Slide is a compact, low cost, high quality, module for displaying a permanently stored full color frame (4-fields) NTSC still. It is ideally suited for applications where stills such as logos, standby messages, or complex test signals are required on a regular basis. The 2602ES-S PROM-Slide is ideal for displaying a full color frame serial digital composite still.
SPECIFICATIONS
The module is programmed to output a still taken from video tape, graphics file, or a Leitch STILL FILE removable cartridge. The PROM-Slide can be reprogrammed as requirements change.
Specifications and designs are subject to change without notice
Outputs (2602ES) Number of outputs Impedance Return loss H phasing rel. to sync. Sampling Freq. response Differential Gain Differential Phase Slide programming
The PROM-Slide plugs into any of the 9 available slots of the SPG-2602 Sync Pulse Generator or into the 3 available slots of the SPG-1302N Sync Pulse Generator.
ORDERING INFORMATION 2 75 Ohm 42 dB to 4 MHz 4 µs advance, 12 µs delay 14.3 MHz (4fsc) 8-bit ± 0.15 dB to 4.5 MHz < 2% < 1° customer specified
2602ES
PROM Slide module (Requires the 1302GL module. Includes rear connector assembly). Serial Composite PROM Slide module (Requires the 1302GL module. Includes rear connector assembly). 1RU Mounting Frame 2RU Mounting Frame Stand-alone MIX BOX NTSC/D2 PROM Slide module with Oscillator for MIX BOX
2602ES-S FR-1302 FR-2602 FR-7000MB 2602ES-XO
Outputs (2602ES-S) Number of outputs Slide programming Digital generation H phasing rel. to sync.
XO modules do not have genlock 2 per SMPTE 259M customer specified 10-bit 4 µs advance, 12 µs delay
Related Products LGI-1302/2602N Logo Generator/Inserter
Contact Leitch for specifications of complex test signals.
VIDEO SOURCE IDENT/TIME CODE READER • Up to eight pre-programmed IDs, each with up to ten lines of 24 characters
• Time code text insertion of both date and time (SMPTE / EBU)
• • • •
Keys into program video Vertical interval character insertion 16 character sizes
• • • • •
1302SI
Count down timer with PIP tones RS-232/RS-485 interface ASCII terminal driver mode PC editor interface included Program custom message with built in message editor (terminal required)
• 525/625 line operation • Available in MIX BOX Stand-alone Series
Selectable black matte background
2
SERIAL PORT/REMOTE 1
OUTPUT
1302SI-BM1
The versatile 1302SI Source Ident module adds new features to the LEITCH 1302 and 2602 Series units.This module allows pre-programming of custom messages into program video as well as the display of time and date from SMPTE/EBU Time Code. Pre-programmed IDs Up to eight IDs, each with up to 10 lines of 24 characters, can be pre-programmed in a single 1302SI module.The character set includes 128 different alpha-numeric and symbolic characters. IDs are selected by a rotary switch. A second rotary switch can be used to set an extra
INPUT
BEEP
-
+
GND
T/C
-
+
alpha-numeric identifier within an ID (eg. Camera A, Remote 2). Each programmed ID can also be remotely selected using contact closures on the 25-way D connector. Count-Down Timer The 1302SI provides a count-down timer with PIP tones (440 Hz), and up to two additional pre-programmed IDs with the count-down timer. The count start/stop is easily programmable and alternate tone frequencies are also available. The count-down IDs appear only for the duration of the actual count-down.
Product Catalog
Display of Data Data is displayed as white characters with a black cutout on program background or on a black matte. Characters can be expanded up to 4 times vertically and/or horizontally. Half-height characters are used for vertical interval insert.
Clock System Driver and the UDT-5700 Series of Up/Down Timers for on-screen date, time or count down/count up.
Interfaces The 1302SI provides an RS-232/ RS-485 interface for on-screen text programming.Custom IDs or messages are programmed with the built-in message editor via the RS-232/RS-485 port. To simplify programming IDs, a PC editor interface program is included.
Up to 4 modules can be housed in the FR-1302 1RU Mounting Frame, while 9 modules can be housed in the FR-2602 2RU Mounting Frame.
External key disable and countdown start triggers are provided for remote control.
Time Code For time code reading applications, the 1302SI includes a play speed time code reader with one ID. The programmed ID remains displayed only when valid time code is received. This time code reading mode provides a simple interface to the CSD-5300 Master
SPECIFICATIONS
Specifications and designs are subject to change without notice
Return loss Output DC Output level
Standard Configuration 525/625 Operation
Jumper selectable
Time Code Input
Performance Frequency response S/N ratio Chroma/Lum. delay error Video propagation delay Differential gain Differential phase Character shaping Character level (adj.) Character cutout (adj.)
Format Impedance Level
< ± 0.15 dB to 5 MHz typ. 65 dB (rel. to 0.714 V Video) ± 5 ns 28 ns typ. < 0.5%. < 0.5 approximately 150 ns sin2 90 to 105 IRE (0.65 to 0.75 V) 0 to 7.5 IRE (0 to 54 mV)
Output Ch. A Level Frequency Power
2.5 Watts per module
Neg. going edge triggered, min. 2 frames (66 ms) pulse TTL low logic
ORDERING INFORMATION
1 1 Vp-p video, ±3 dB 75 Ohm terminating >40 dB to 5 MHz
Mounting Frames FR-1302
1302SI
FR-2602
Outputs Number of outputs Impedance
66 Ohm balanced 0 to 10 dBm, adjustable approximately 440 Hz
Electrical
Program Input Number of inputs Level Impedance Return loss
EBU/SMPTE (standard or drop frame) High-Z, balanced 4 Vp-p ±8 dB
Audio Output (PIP Tone)
Remote Control Count Down Start Key Disable
>34 dB to 5 MHz back porch at ground, 50 mV 140 ±5 IRE (1V, 36 mV)
FR-7000MB
2 75 Ohm
Video Source Ident/Time Code Reader module (includes PC Software) 1RU Mounting Frame, holds four modules (includes 1302PS Power Supply) 2RU Mounting Frame, holds nine modules (includes 1302PS Power Supply) Stand-alone MIX BOX
TIME CODE CONVERTER
TCC-1302
• Generates continuous color-framed, video-locked time code in either EBU or SMPTE-Drop Frame Time Code formats
• Genlocks and references to input video: NTSC (SMPTE) or PAL (EBU)
• Automatic soft jam-sync to real time input without interruption of output time code
• Free-run when no input real time and/or video is available (manual set and reset)
• Fully programmable offsets • Direct compatibility with Leitch CSD-5300 Master Clock System Driver and Auxiliary Offset user bit option
• Ability to convert non-drop frame SMPTE Time Code to video-locked Drop Frame SMPTE Time Code
• Serial RS-232 output port provides ASCII
representation of time code value in user-selected formats
• Ability to pass or delete user bit data • Remote control operation via RS-232 serial
command port and full hardwired remote control of front panel switches
• Keyed video insertion of time code when used with 1302SI Video Source Ident in same or other frame
• 24- or 12-hour output format selectable 1302CC-BM
SERIAL PORT/REMOTE VIDEO
TIMECODE
-
Product Catalog
+
GND
-
+
