Transcript
REVISIONS REV
DESCRIPTION
AE
RF MOUNTING FLANGE & WELD FTG. (SEE TABLE/SHEET 2 FOR SIZES) STUDS, NUTS & GASKET
GENERAL UPDATES
CHG.NO.
APP'D
DATE
DSI1003288
JR
05/06/10
5.50 [139,7] MAX.
SENSOR SIZE 2
HIGH PRESSURE INSTRUMENT VALVE
9.00 [228,6] MAX.
3
OPTIONAL RTD PORT
RF SENSOR FLANGE (SEE TABLE/SHT 2 FOR SIZES)
EQUALIZER VALVE LOW PRESSURE INSTRUMENT VALVE
FLOW
PACKING ASSY.
ID WALL
VALVE BONNET ASSY. LOCKING PIN
ODH ODF
NOTICE
OW
INTEGRAL MOUNT HEAD OPTION
FL
FOR ACCURATE FLOW MEASUREMENT THE CORRECT HOLE SIZE IN PIPE MUST BE:
1-5/16 INCH(34mm) DO NOT DRILL OVERSIZE DO NOT TORCH CUT HOLE
*ALL DIMENSIONS ARE NOMINAL AND ARE FOR REFERENCE ONLY
®
TYPE I
*UNLESS OTHERWISE SPECIFIED DIMENSIONS IN INCHES (MM)
J.PAYLOR
DR.
BOULDER, COLORADO
10/26/05 TITLE
DIMENSION DRAWING, MODEL 485 ANNUBAR FLOWMETER (3051SFA, 3051CFA 2051CFA, 3095MFA) SENSOR SIZE 2 FLANGE-LOK 150# - 600# ANSI
APPROVAL DRAWING TAGGING SPECIALS
Electronic Master – PRINTED COPIES ARE UNCONTROLLED – Rosemount Proprietary
FLANGE-LOK SENSOR SIZE 2
NOTE: UNLESS OTHERWISE SPECIFIED ALL INFORMATION IS BOTH (TYP) & GENERAL TO STANDARD PRODUCT DESIGN ALL PIPE SECTIONS SHOWN FOR REFERENCE ONLY
D.VERHAAGEN
1/9/06
SIZE
A
SCALE: NONE
DRAWING NO.
00485-1010
SHEET
1
OF
3
ODH
ODF
FLOW HIGH PRESSURE INSTRUMENT CONNECTION
LOW PRESSURE INSTRUMENT CONNECTION
FLANGE-LOK HORIZONTAL FLOW REMOTE MOUNT INSTRUMENT CONNECTIONS (NO INSTRUMENT VALVES SHOWN)
W
FLO
® BOULDER, COLORADO
SIZE
A
FSCM.NO.
SCALE: NONE WT.
Electronic Master – PRINTED COPIES ARE UNCONTROLLED – Rosemount Proprietary
DRAWING NO.
00485-1010 SHEET
2
OF
3
3051S TRANSMITTER
EQUALIZER VALVE
3051SFA, STD HARDWARE TEMP WIDTH WIDTH
FLOWMETER
HEIGHT
WIDTH
2051CFA
7.03 [178,5]
5.50 [139,7]
3051CFA
7.10 [181,0]
5.67 [144,0]
3051SFA
8.53 [216,7]
5.67 [144,0]
3095MFA
7.10 [181,0]
5.67 [144,0]
TEMP WIDTH
10.09 [256,3]
HEIGHT
LOW PRESSURE INSTRUMENT VALVE
® HIGH PRESSURE INSTRUMENT VALVE
3051SFA SHOWN
BOULDER, COLORADO
SIZE
A
FSCM.NO.
SCALE: NONE WT.
Electronic Master – PRINTED COPIES ARE UNCONTROLLED – Rosemount Proprietary
DRAWING NO.
00485-1010 SHEET
3
OF
3
