Preview only show first 10 pages with watermark. For full document please download

Nv-216a-pv Catalogue

   EMBED


Share

Transcript

NVT Data Sheet NV-216A-PV 2/8/06 11:40 Page 1 NVT TM Model NV-216A-PV Video Transceiver US Features: Power-Video (PV) signals are routed via UTP and RJ45 Use with the RJ45 connector based NV-704J-PVD or the NV-716J-PVD for organized cable management to your control equipment from the IDF Up to 3,000ft (1km) with an NVT active receiver or hub Supports “up-the-coax” type control signal up to 750ft (225m) Exceptional interference rejection Built-in transient protection Limited lifetime warranty The NVT Model NV-216J-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone cable. Baseband (composite) signals of any type are supported. The NVT Model NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT's popular NV-213A video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT's PVDTM product line. Connect the RJ45 to 4-pair cable to be routed to the NVT cable integrator and on to an active or passive receiver hub in the MDF/Control Room. The unparalleled interference rejection and low emissions of the NV-216J-PV allows video signals to co-exist in the same cable bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-216J-PV carries a limited lifetime warranty are UL and cUL listed and CE, WEEE and RoHS compliant. Network Video Technologies Ltd NVT House, 99 Waldegrave Road, Teddington, Middlesex TW11 8LA Tel: +44 (0) 208 977 6614 • Fax: +44 (0) 208 973 1855 • [email protected] • www.nvt.com NVT Data Sheet NV-216A-PV 2/8/06 11:40 Page 2 NVT TM Model NV-216A-PV Video Transceiver Technical Specifications Video Mechanical Frequency response DC to 5 MHz Attenuation 0.5 dB typ Common-mode / Differential-mode rejection 50 KHz to 5 MHz 60 dB typ Impedance Coax, male BNC 75 ohms UTP, RJ45 Data Connector 100 ohms RJ45 pinouts 1+ 2 3+ 4 5+ 6 7+ 8 - Environmental Temperature Humidity (non-condensing) Transient Immunity Video Power Category Type Impedance DC Loop Resistance Regulatory RoHS Cable Distance One Unshielded Twisted Pair 24-16 AWG (0,5-1,31 mm) Supply voltage, cable resistance and minimum camera operating voltage determine the maximum camera distance. Examples assume a minimum 21VAC at the camera: 2 or better 100 ± 20 ohms 52 ohms per 1,000 ft (18 ohms per 100 m) Differential Capacitance -20 to +75°C 0 to 95% per ANSI / IEEE 587 C62.41 Power Cable Type Network Cabling 1.6 inches (40.6mm) 0.88 inches (22mm) .81 inches (20.5mm) 1.0 oz (30 g) Body Length Body Depth Body Height (not including BNC) Weight CAMERA POWER DISTANCE Power Supply Voltage Resultant Camera Voltage 100 mA B&W Camera 2-pair 24 AWG 2-pair 23 AWG (Cat6) 300 mA Color Camera 2-pair 24 AWG 2-pair 23 AWG (Cat6) 1 Amp P/T/Z Camera 2-pair 24 AWG 2-pair 23 AWG (Cat6) 19 pF/ft max (62 pF/m max) 24 VAC 21 VAC 28 VAC 21 VAC 12 VDC 11.5 VDC 300m 460m 760m 1.2km 50m 90m 107m 180m 260m 425m 15m 30m 30m 45m 75m 120m 4m 9m Cable should be Cat 5 or better. Low-voltage camera power, video, and RS-422 or RS-485 data may reside within the same cable bundle, however do not run 24 or 28V AC within the same cable bundle as other telecom or datacom signals. Specifications subject to change without notice. NV-216A-PV NV-218A-PVD Fixed Camera w/built-in NVT P/T/Z dome w/built-in NVT Cabling/ IDF Telecom Closet Control Room / MDF NV-16PS10-PVD Network Video Technologies NV-16PS10-PVD Mid-Span Power Supply Hub Power 1 2 24V 28V 3 24V 28V 4 24V 28V 5 24V 28V 6 24V 28V 7 24V 28V 8 24V 28V 9 24V 28V 10 24V 28V 11 24V 28V 12 24V 28V 13 24V 28V 14 24V 28V 15 24V 28V 16 24V 28V 24V 28V TM NVT RJ45 Patch-cords RJ45 Wall Plates 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 4-pair Cat5 or better 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25-pair UTP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Matrix Switch DVR P/T/Z Telemetry / Data NV-1662J 24-Port Patch-panel 1 24-Port Patch-panel Copyright © 2006 NVT, Inc. 411-216-1-A Network Video Technologies Ltd NVT House, 99 Waldegrave Road, Teddington, Middlesex TW11 8LA Tel: +44 (0) 208 977 6614 • Fax: +44 (0) 208 973 1855 • [email protected] • www.nvt.com