Transcript
Intrusion Panel NX-10-V3-EUR
48 zone full wireless panel in small polycarbonate housing
The NX-10 is a new member of the well-known NetworX panel family. In addition to full compatibility with the NetworX component range it delivers wireless capabilities out of the box. The dual transceivers are supporting wireless sirens, wireless keypads and wireless sensors out of the 868MHz Gen2 Range from GE Security. Beside the strong wireless features, the panel allows for data communication with the latest technology available on the market. The analogue dialer on board can always be used as primary or backup reporting device. On top of GSM and analogue dialer, the system can be expanded with an IP module for broadband communication. Specifications
Supply voltage (typical)
230 Vac, 50 Hz, 25 VA
Operating power (nominal)
16.5 Vac/50 Hz
Battery
Max. 12 Vdc/16 Ah
Auxiliary power
1.2 A
Output voltage
13.8 V +/- 2%
Number of zones Wired
2
Wireless
48
PIN codes
99 (4 digits) or 66 (6 digits)
Partitions
4
Logfile (events)
512
Outputs
E
Relays
2 x 1.1A at 13.8V +/- 10% (2 SPDT)
E
Supervised Siren Output
1 x 1A at 13.8V +/- 10%
E
3K3 Ohm
E
Loop resistance
E
Wireless Frequency
868MHz Gen2 Dual transceiver Auto diversity -10° to 55°C
Operating temperature
E E E
E
Dimensions Housing
225 x 256 x 113 mm
E E
Humidity
Max 95%, non condensing
Shipping weight
1.7 Kg
Ordering Information NX-10-V3-EUR NX-10-LB-V3-EUR NX-848E-BB NX-848E NX-848E-RP
48 zone full wireless panel in small polycarbonate housing 48 zone full wireless panel in large polycarbonate housing Baseboard for Transceiver daughterboard NetworX RF Receiver 868MHz Gen2 - 48 Zones Smart repeater for 868 MHz Gen2 Transmitters
WEBIPS-EU-NX-10-V3-EUR-2013-05-8 11:51:11 - UT Fire & Security European version - product might not be available nationally - www.utcfssecurityproducts.eu
48 wireless zones 2 hardwired zones on board Compatible with NX expander Menu-driven or location programming 'Designer' 2-way wireless keypad 4 partitions 512 events log file Dual Transceiver can be placed outside the panel housing USB port for PC programming and software update EN 50131 Grade 2 Class 2 Certified REQ & INCERT Certified
