Transcript
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
WARRANTY NXG products are designed to the highest possible value and performance standards. Our confidence in their quality is such that NXG Technology offers customers this transferable limited warranty:
NX-HDMIX-WP-IR-50 HDMI Wall Plate Extender
NXG Products Two-Year Limited Warranty If the NXG products prove to be defective in workmanship or materials within two years from the date of the original customer’s purchase, we will, at our option, repair or replace the defective products.
DISCLAIMER THE WARRANTY STATED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER LIABILITIES AND OBLIGATIONS OF NXG TECHNOLOGY, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. NXG TECHNOLOGY HAS NOT MADE AND DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION, WARRANTY OR COVENANT WITH RESPECT TO THE CONDITION, QUALITY, DURABILITY, DESIGN, OPERATION, CAPACITY, FITNESS FOR USE OR SUITABILITY OF THE NXG PRODUCT.
Exclusion of Certain Damages NXG Technology’s liability for any defective product is limited to repair or replacement of product at our option. NXG Technology shall not be liable for incidental or consequential damages of any kind or character because of product defects. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply.
This Warranty Does Not Cover: • Damage caused by abuse, accident, misuse, negligence, or improper operation. • Any product whose serial number has been altered, defaced, or removed. • Products that have been altered or modified. • Normal wear and maintenance. • Damages caused by shipping. (All claims for shipping damage must be made with the carrier.)
568B DEAR CUSTOMER Thank you for purchasing this NXG product. For optimum performance and safety, please read these instructions carefully before connecting or operating this product. Please keep this manual in a safe place for future reference.
FEATURES • Includes one transmitter and one receiver fitting North American Decora™ wall plate sizes. • The product operates using Dual UTP cable (Cat5E/6) as a substitute to expensive long HDMI cable runs. The RJ45 connections must follow the IEEE-568B standard. • Transmission distance reaches up to 50 meters (165’) at 1080P • Automatic feedback, equalization and amplification adjustments • Signal rates up to 2.25Gbits in support of 1080P • Pass through infrared control signals for the remote source • DC5V Power Supply for receiver (RX)
NOTICE
Warranty Service Warranty service must be performed by an authorized service center, usually an NXG dealer or its authorized agent. All warranty repairs must be accompanied by the original bill of sales. No other document is acceptable or is required. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
4
NXG Technology reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Scottsdale, AZ email:
[email protected] web: nxgtechnology.com
PACKING CONTENTS 1) Main Unit. HDMI Wall Plate 2) DC5V Power Supply for receiver 3) Operating Instructions 4) IR TX unit (IR emitter cable) 5) IR RX unit (IR receiver cable)
1
TABLE OF CONTENTS Packing Contents Specifications Connections Connecting and Operating Typical Application Maintenance Product Service Warranty
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
CONNECTING THE NX-HDMIX-WP-IR-50
SPECIFICATIONS Operating Temperature Range Operating Humidity Range Input Video Signal Input DDC Signal Support Video Format HDMI Output Support Audio Format Transmission Distance Power consumption Dimension (L x W x H) IR Wavelength & Frequency Net Weight
-5 to +35C(-41 to +95 ) 5 to 90%RH (No Condensation) 0.5-1.0 Volts P-P 5 volts p-p (TTL) DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P HDMI 1.3, HDCP 1.1 DTS-HD Master Audio0Dolby true-HD etc. 1080P 8-bit 50m(Maximum) over CAT5E/CAT6 /24AWG/Solid (Recommend to use 23AWG Cat6 cable) 3 watts (Maximum) 115 x 70 x 35mm Wavelength: 940nm, frequency: 38kHz 260g(Pair)
Note 1: Specifications are subject to change. Mass and dimensions are approximate. Note 2: When in 36Bit deep color mode, we suggest setting the HDMI source device to 1080i or 720p.
1) Connect the HDMI source output into the HDMI IN on the front plate of the NX-HDMIX-WP-IR-50 (TX). (TX = Transmitter / RX = Receiver) 2) Connect two CAT-5E or CAT6 cables to both the outputs of NX-HDMIX-WP-IR-50 (TX) and inputs of NX-HDMIX-WP-IR-50 (RX). Please pay attention to the correct connection of the two cables, CAT5e/6-1->CAT5e/6-1 (The RJ45 connections must follow EIA/TIA 568B). 3) Connect the HDMI source input into HDMI OUT on the front plate of the NX-HDMIX-WP-IR-50 (RX). 4) Connect the IR TX UNIT into NX-HDMIX-WP-IR-50 (TX). Permanently affix the TX IR emitter over the source components IR window by removing the adhesive backing. In order to work properly, the emitter must be placed on the source component IR receiver window. 5) Connect the IR RX UNIT into NX-HDMIX-WP-IR-50 (RX). The RX IR receiver should be placed in direct line of sight with the handheld remote. Consider affixing the IR receiver on the TV frame or base. NOTE: In some cases the power adapter could be taken off. The power adapter is needed when the signal source isn’t sufficient enough to drive the HDMI signal. Gently Insert/Extract cables.
CONNECTIONS TRANSMITTER (TX) Front Panel
Rear Panel
1. HDMI input port 2. Power input port 3. IR/TX 4. Indicator of HDMI input 5. Indicator of power input 6. CAT5e/6 output ports
TYPICAL APPLICATION MAINTENANCE When cleaning this unit, use only a dry soft cloth. Never use an alcohol based cleaner, paint thinner or other harsh cleaning chemical. Be careful not to dislodge the TX IR emitter from its permanent position on the Source IR window.
RECEIVER (RX) Front Panel
Rear Panel
2
1. HDMI output port 2. Power input port 3. IR/RX 4. Indicator of HDMI input 5. Indicator of power input 6. CAT5e/6 input ports
PRODUCT SERVICE 1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged; (b) Objects or liquids have damaged the unit; (c) The unit has been exposed to rain; (d) The unit does not operate normally or exhibits a marked change in performance; (e) The unit has been dropped or the cabinet damaged. 2) Do not attempt to service the unit beyond that described in these operating instructions. Unauthorized service may result in fire, electric shock, or other hazards and will void all warranty. 3
