Transcript
Observant Pico
Actual Size
A self-contained unit with a wide variety of interfacing capability that allows connected equipment to be remotely monitored, managed and automated via integration with Observant Global
Product Sheet
Observant Pico
Sharing many of the features of the Observant C3, Pico has been specifically designed to serve as a compact remote infrastructure management tool. Built with industrial strength materials and featuring a wide range of communications and connectivity options, Pico is designed for integration with third party equipment and the entire range of Observant products. Typical operating scenarios range from remote and industrial automation to residential monitoring needs.
PRODUCT SPECIFICATIONS
Enclosure • ABS plastic enclosure with SIM card access panel • Indoor wall or enclosure mounting (via DIN rail) • Recessed panel mounting option • Dimensions: 5½ inches (h) x 3¾ inches (w) x 1¾ inches (d) Environmental • Operating temperature: -22 ℉ to 158 ℉ • Ingress protection rating: IP41 Communications • Wired ethernet • Multimode 3G GSM/HSPA+ and CDMA cellular modem via SMA connector • 900MHz FHSS radio via SMA connector • GPS via SMA connector • Bluetooth class 2 low energy with integrated antenna User interface • Colour capacitive touchscreen interface • RGB LED indicating system status • Audible user feedback Power • 10 – 30 VDC • 2-way pluggable terminal block • Typically less than 100 mW average input power consumption (depends upon wireless and sensor configuration) • 20 W peak power draw • Internal automatically recharged lithium polymer backup battery
Other standard features • OpenADR 2.0b certification pending • Data logging and remote synchronization of internal and sensor parameters • In-built GPS (logged data is geo-coded) • Internal time keeping (for time-stamping of logged data) • Remotely upgradeable software • Extensive internal diagnostics and reporting • Device driver software architecture for expansion of sensor support • USB type Mini B for configuration and diagnostic capability 1¾ inches
OBS-MKT-PS011-US_V1
5½ inches
3¾ inches
Sensor connectivity • All connections protected against short circuit, reverse polarity and voltage transients • 1 x RS485/SDI-12 sensor port -- 4-way pluggable terminal block -- Switched sensor power (voltage equal supply) -- Auto resetting 600 mA current limit -- Configurable SDI-12 or RS485 line levels • 2 x Dual purpose outputs -- 4-way pluggable terminal block -- Power or 20V, 4 – 20 mA sensor mode -- Voltage output equal to supply in power mode -- Auto resetting 600 mA current limit • 4 x Dual purpose input -- 2 x 4-way pluggable terminal blocks -- Configurable digital type (sink or source) -- 0 – 10 V analog input mode -- Frequency measurement and pulse counting up to 1 kHz (@ 50% duty cycle)
Observant, Inc. 4221 Northgate Blvd, #5, Sacramento, CA 95834, USA
T +1 (877) 730-0700 E
[email protected] W observant.net
