Transcript
WiFi Security Camera User Manual
Preparaon Before Use 1. Smartphone/ Tablet PC Version request: iOS 7.0 above / Android 3.0 above 2. OCam-M3 3. A Wi-Fi router that can be connected to the Internet. 4. Micro SD memory card is required for recording. (More than 16GB/Class6 is recommended) 5. Includes: a. OCam power adapter b. Mount c. Stand d. Screws x 3 e. Plasc x 3
Contents 1. Product Introduc!on 1.1 Hardware 1.2 So"ware
2. Se#ng up Camera 3. Add My Carmera 4. Viewing Camera image & screen introduc!on 4.1 Live view 4.2 Introduc!on of live view 4.3 Icon instruc!ons as below 4.3.a Admin privileges 4.3.b Op!ons for sound 4.3.c Recording and Viewing saved images 4.3.d Snap shots and Viewing saved images 4.3.e Full screen and Image Rota!on
5. Connect Other Camera 5.1 To connect to the camera of same network 5.2 To connect to remote camera (not from the same network)
6. Camera Se#ng 6.1 Camera Name 6.2 Delete Carmera 6.3 Video Se#ng 6.4 Advanced Se#ng 6.4.a Mode Se#ng 6.4.b Camera Password Se#ng 6.4.c Se#ng Admin Password 6.4.d Event Viewing 6.4.e Mo!on Detec!on Se#ng 6.4.f Sound Detec!on Se#ng 6.4.g Memory Card Se#ng 6.4.h Recording Se#ng 6.4.i Video Playback 6.4.j System Informa!on 6.5 Mo!on and sound detec!on no!fica!on 6.5.a Mo!on detec!on no!fica!on 6.5.b Sound detec!on no!fica!on
7. Scene Mode Introduc!on 8. Factory Default Recovery 9. Firmware Update 10.Troubleshoo!ng & Support 11. Maintenance
P.1 P.1 P.1 P.2 P.3 P.7 P.7 P.7 P.8 P.8 P.8 P.8 P.8 P.9 P.10 P.10 P.10 P.11 P.11 P.11 P.11 P.12 P.12 P.12 P.13 P.13 P.13 P.14 P.14 P.14 P.15 P.15 P.16 P.16 P.16 P.17 P.19 P.19. P.20 P.21
Product Introduc!on
1.Product Introduc!on 1.1 Hardware OCam Body Hanging hole
Status indicator
Speaker
IR Lights
Light sensor Microphone Holder socket
Memory card slot OCam-M3 OCamM3 S/N:145200030
Power port
UID
FCC ID:2AA8WOCAM-M1 UID:AAAABBBBCCCCDDDDEEEE SSID:OCAM-X1PP78
Reset bu$on
Stand
Mount
Adapter
Product name Produc!on numbers
S/N:145200030
OCam UID numbers OCam WiFi name
QR Code
OCam-M3
UID
Cer!fica!on numbers FCC ID:2AA8WOCAM-M1 UID:AAAABBBBCCCCDDDDEEEE SSID:OCAM-X1PP78
1.2 So#ware Download “OCam” from Google Play/Apple App Store and install on your smartphone or Tablet PC.
P.1
2. Seng up the Camera 2.1 To put the camera on the table, please follow the instruc!on below: Insert the holder into the holder socket
2
3
Make sure the bo"om of OCam into the right posi!on
Complete
2.2 To fix the camera on the wall, please follow the instruc!on below: 1
A"ach the wall mount to your wall or ceiling using the screws included in the box.
2
Mount your camera by fing the base into the wall mount. Further Explana!on: a"ach the plas!c anchor to your cement wall before you mount the camera on a wall. (Only used when the wall are hard like the cement wall)
2.3 Connect the product to power (shown below), and wait un!l the indicator light goes flashing. If you need to do recording, please insert the Micro SD card.
Micro SD 卡
P.2
Seng up the Camera
1
3. Add My Camera First me connecon se#ngs Step 1. Please wait for 30 seconds a!er the product connects to power. The indicator light would flash red and blue as picture below.
Connecng to the Camera
Step 2. Turn on the WiFi on smartphone or tablet PC and search “OCAM-XXXXXX” (refer the label on the back of OCam) for connecng. The default password is“12345678” iOS AT&T
Step 3.Turn on the“OCAM”APP
OCAM P.3
Android
Step 4. Enter the camera list and choose “ Add My Camera”.
Camera list (Please choose the camera)
? Rescan Camera
Info
If no OCam device is detected, please quit the APP and go back to Step 2. Note that for the iOS devices, please click home bu!on to exit APP.
Quick Start Guide
!
Didn't detect any OCam
Exit OCam APP and go to Wifi setting page on your smart phone/tablet, enable the WiFi and follow the OCam quick start guide in the box. Re-open OCam App after your smart phone/ tablet connect to the OCam.
Exit App
Step 5. Please set the admin password and then click “Next”.
Setting Admin Password
Admin Please set the admin password
Re-enter the admin password
Show password Admin password is required when doing advanced settings
Back
P.4
Main
Next
Connecng to the Camera
Add My Camera Connect Other Camera
Step 6. Please choose the Wireless Network for connecng OCam. (“AE-1”in the following example) Please select the WiFi to connect
AE-1 HOME-2F ANGEL.CHIH
Connecng to the Camera
Back
Main
Next
Step 7. Please enter the Wireless Network password.
Enter The WiFi Password
AE-1
Enter The Password
Show password
Back
Main
Next
You will see the picture below for entering the incorrect Wireless Network LAN password. Please go back to Step 6-7 again.
WiFi password is incorrect Please re-enter the password
Confirm
P.5
Step 8. Please wait for about 60 seconds for connecng to the Internet. Click Confirm when connecon is completed.
The camera setup process completed
In connecting, Please wait 60 seconds
Connecng to the Camera
Please do not unplug OCam from power or close the App until setting completed. Confirm
Step 9. Connected camera will be shown in the list. Camera list (Please choose the camera) Camera
Online
UID：888ABCDEFGHIJKLMN888
Add My Camera
Connect Other camera
? Info
P.6
Rescan Camera
4. Viewing Camera image & screen introduction 4.1 Click the camera icon in the list for instant image. (Picture of camera list added) Camera list (Please choose the camera) Baby Room
Online
UID：888ABCDEFGHIJKLMN888
Add My Camera
Connect Other camera
Rescan Camera
4.2 Introduc!on of live view Baby room 888ABCDEFGHIJKLMN888
Ⴞෛ൪ࢬ
Online/LAN 320x180 / FPS:10 / bps: 439Kbps Online user: 2 / Frame Ratio: 0/84
SCENE
Main
P.7
Scenario mode
Viewing Camera image & screen introduc!on
? Info
4.3 Icon instruc!ons. iOS Album
Record Replay
Snap shot
i Flip Ver!cally
Sound
Flip Horizontally
System Informa!on
Android Album
Record
Flip Ver!cally Flip Horizontally
Sound Full Screen
Grey points as unrecording. Click it without inser!ng card will pop out the prompt window, “ No SD card detected. Please insert SD card for recording func!on.” Note that there is no Full Screen icon in the iOS devices, rotate the device when you need to view full screen video. 4.3.a Some func!ons require admin privileges for se"ng modifica!on. There will be the lock icons for non-admin users. Click and insert admin password for ac!va!on. Monitoring Window op!ons for non-admin password Scene S!mula!on. SCENE
4.3.b “Mute” to turn off the microphone and speaker of the camera. “Listen” to monitor the microphone of camera via smartphone/ tablet PC “Speak” to broadcast via the camera speaker by using smartphone/ tablet PC Click on Sound for op!on menu Mute Listen Speak
P.8
Viewing Camera image & screen introduc!on
Replay
Snap shot
4.3.c It shows without inserng memory card. A!er memory card inserted, click , the recorded images will be saved in the card. Click on for replaying the images recorded. 4.3.d Click to capture the monitoring image and save it to the memory of smartphone. Click on to see the pictures just taken. 4.3.e Click Click Click
for vercal flip and click again for original image. for horizontal flip and click again for original image. , it will automacally turn into horizontal full screen. Viewing Camera image & screen introducon
P.9
5. Connect Other Camera To add other camera, please choose “Connect Other Camera”. Camera list (Please choose the camera) Baby Room
Online
UID：888ABCDEFGHIJKLMN888
Grad Pa House
Online UID：V3D57766565210131688
Living Room
Offline
UID：V3D57766565210135488
Rucca
Offline
UID：V3D57766565210135468
Add My Camera Connect Other Camera
? Rescan Camera
Info
Select The Camera Connect Local Camera 888ABCDEFGHIJKLMN777 192.168.0.178
888ABCDEFGHIJKLMN666 192.168.0.168
888ABCDEFGHIJKLMN555 192.168.0.198
Connect Remote Camera Setting Remote Camera
Back
Main
Next
5.2 To connect to remote camera (not from the same network), please enter related informaon as instrucons below Connect Remote Camera Camera UID
QR Code
Enter the camera password
Show password Camera Name
Back
P.10
Main
Next
Adding Exisng
5.1 To connect to the other camera of local network, select the camera and Click on “Next” and enter password to complete the connecon. ( The default se!ng camera password: admin )
6. Camera Seng 6.1 Camera Name Seng Camera Name Setting 888ABCDEFGHIJKLMN888
Camera Name
Back
Main
Confirm
6.2 Delete Camera Delete Camera Baby room 888ABCDEFGHIJKLMN888
Are you sure to delete this camera?
Camera Sengs
Back
Delete
6.3 Video Seng Video Setting
Video Setting
Frequency
H.264 quality
50Hz 60Hz
512 Kbps 256 Kbps
Live View Resolution
192 Kbps
QVGA 320*180
Frame Rate
VGA 640*360
30fps
HD 1280*720
25fps
H.264 quality
20fps
512 Kbps
15fps
256 Kbps
10fps
192 Kbps
5fps
Back
Main
Confirm
Back
Main
Confirm
The Frequency, Live View Resolu!on and compressed format can be adjusted. (Tips: For HD 1280x720, it requires 2Mbps upload bandwidth. VGA or QVGA P.11 is recommended for be"er image resolu!ons if having not enough bandwidth.)
6.4 Advanced Seng Camera Setting
Advanced Setting
Camera Name Setting
Mode Setting
Delete Camera
Camera Password Setting
Video Setting
Admin Password Setting
Advanced Setting
Event Viewer Motion Detection Setting Sound Detection Setting Memory Card Setting Recording Setting Video Playback System Information
Main
Confirm
6.4.a Mode Seng Mode Setting Baby Monitor Children Safety Elderly Care Home Security Pet Monitor Traveling Mode Standard Mode
OCam has 7 exclusive scene modes. The default seng is Baby Monitor mode; the user can change the sengs on the page of instant viewing or advanced sengs based on requirements. 6.4.b Camera Password Seng Camera Password Setting 888ABCDEFGHIJKLMN888 Enter Your Old Password
We recommend that 8-12 character password is o#en considered good protec"on for your OCam Network Security.
Camera New Password
Re-Enter Your New Password
Show password
Back
Main
Confirm
To change the camera password, please enter the old password and then type in the new password twice for confirma"on. Note: The remote devices will be unavailable to view once the password is P.12 changed. Please enter new password for re-connec"on.
Camera Sengs
Main
6.4.c Seng Admin Password Setting Admin Password Admin Please enter the old admin password
Please set the admin password
Re-enter the admin password
Show password Admin password is required when doing advanced settings.
Back
Main
Confirm
To change the admin password, please enter old password and type in the new password twice for confirma!on. 6.4.d Event Viewer Event Viewer Motion detection events 14/08/06 15:58 Motion detection events 14/08/08 08:00 Sound detection events
14/08/09 23:11
Camera Sengs
Confirm
6.4.e Mo!on Detec!on Seng Motion Detection Setting Motion Detection
Yes
No
Only record when the camera detect the moving object
Ⴞෛ൪ࢬ
Please adjust the area for motion detection
Event Notifications
Back
P.13
E-Mail Setting
Confirm
Turn on the mo!on detec!on, you can manually choose the range of movement monitoring. (Original default is full screen)
6.4.e Moon Detecon Seng- Email Seng Setup your Email, support gmail, yahoo and hotmail, refer below picture and fill SMTP informaon Setup your Email, support gmail, yahoo and hotmail, refer below picture and fill SMTP informaon Record
E-Mail Setting SMTP Sever name
E-Mail Setting
Server Name
SMTP Password
smtp. gmail .com
*********
Select below type to SSL / TLS. APP will setup 465 automacally
Port Number
Email Password
Recipient e-mail address
User email
465
[email protected] SMTP Account
User email Security Type
[email protected]
None
Back
Select bu"on
STARTTLS SSL/TLS
SMTP Password
Back
Confirm
Confirm
6.4.f Sound Detecon Seng Sound Detection Setting Yes
Sound Detection
No
Low
High
Back
Confirm
6.4.g Memory card seng Memory Card Setting Safely remove the memory card
Back
P.14
Main
Confirm
Camera Sengs
Volume Sensitivity
6.4.h Recording Seng Recording Setting Recording Quality HD VGA
Back
Main
Confirm
6.4.i Video Playback Video Playback Rec-H264-640x360_2015-1-1_12-26-17.avi Rec-H264-640x360_2015-1-1_12-30-25.avi Rec-H264-640x360_2015-1-1_12-50-05.avi
Camera Sengs
Back
Main
6.4.j System Informa!on System Information APP Version: 1.00 Camera nameĈ AHOKU-OCam-XXXX Camera UIDĈ 888ABCDEFGHIJKLMN888 Copy UID
Back
Main
Click on Copy UID to automa!cally copy the UID words and sent it to others (For adding remote camera) P.15
6.5 Mo!on and sound detec!on no!fica!on 6.5.a Mo!on detec!on no!fica!on: You can manually choose monitoring range, OCam will send no!fica!on and starts recording for any movement in the selected area. Motion Detection Setting Motion Detection
Yes
No
Only record when the camera detect the moving object
Please adjust the area for motion detection E-Mail Setting
Event Notifications
Back
Confirm
6.5.b Sound detec!on no!fica!on: You can adjust the sound sensi!vity and it will send no!fica!on when any sound is detected.
Sound Detection
Yes
No
Volume Sensitivity Low
High
Back
P.16
Confirm
Camera Sengs
Sound Detection Setting
7. Scene Mode Descripon OCam has 7 exclusive scene modes and the inial se!ng is Baby Guard mode; user can change se!ngs on the page of instant viewing or advanced se!ngs based on requirements. The descripon and parameters se!ngs are as below: A. Baby Monitor When detecng baby’s crying or abnormal sound in the environment, the systems will immediately send out noficaons to remind the parents and start recording automacally for 1 minute to ensure children’s safety.
B. Children Safety When the system detects children arriving home, it will immediately send noficaons to parents. Parents can remind the children to be safe via the broadcast funcon. (The default is message noficaon. Please set up for email noficaons.)
Scene Mode Descripon
C. Elderly Care For elderly care, with the full me recording, it can avoid missing any possible accident, and be updated with the situaon without being there through the monitoring funcon.
P.17
D. Home Security The se"ng with memory card over 8G, the 24hrs home recording history can be saved clearly.
E. Pet Monitor Pets are o#en alone at home, when their sound is detected, you can immediately view the instant image and use voice to comfort or correct the pet’s behavior.
G. Standard Mode User can adjust the se"ngs based on preferences.
P.18
Scene Mode Descrip!on
F. Travel mode The se"ng with memory card over 8G can save the recorded moving records for more than 1 week. User who is not home will be receiving of message for any movement in the house. (The default is message no!fica!on. Please set up for email no!fica!ons.)
8. Factory Default Recovery Please use a thin needle to press in the RESET hole in the back of OCam for 8 seconds and release. There will be beep sound as recovering the factory default.
OCam-M3 S/N:145200030
UID
FCC ID:2AA8WOCAM-M1 -M1 UID:AAAABBBBCCCCDDDDEEEE DDEEEE SSID:OCAM-X1PP78
Reset bu#on
9. Firmware Update Please use a thin needle to press in the RESET hole in the back of OCam for 8 seconds and release. There will be beep sound as recovering the factory default. Installa!on steps as below Step 1. Download the updated version of firmware to the Micro SD card. (h#p://www.ocam-online.com/download.php) Step 2. Connect the OCam to power.
Step 4. The OCam will update automa!cally and using voice prompt to inform the update comple!on. Step 5. Please remove the memory card once the update is completed.
P.19
Factory Default Recovery / Firmware Update
Step 3. Insert Micro SD card into the memory card slot of OCam.
10. Troubleshoong & Support If your smartphone or tablet cannot be connected to OCam, please follow the instrucons below: 1. Make sure the power cord is fully plugged in. 2. Make sure OCam’s power indicator light goes flashing. 3. Make sure OCam is in the WiFi available connecng area with the smartphone/ tablet . 4. Make sure OCam is in the available area of the Wi-Fi router. 5. Make sure you insert the correct camera password 6. If OCam would be changed to different WiFi area, you need to reset the camera and setup again. (Please follow the No.3 content of the manual of “add my camera” for reference.
Troubleshoong & Support
P.20
11. Maintenance 1. Keep children away from all the spare parts and accessories. 2. Finger prints and stains will have nega!ve influence on the camera lens. Please avoid touching the lens with hands. 3. Please use so# cloth to wipe the lens for any stain or dust occurs. 4. Please keep the camera dry. Rain, humidity or any liquid includes minerals will cause circuit corrosion. 5. Please do not use or store the camera in areas of dust and dirt. 6. Do not store the device in areas of high temperature. It would shorten the using !me of electronic devices and even melt specific plas!c parts and cause deforma!on. 7. Do not store the device in areas of low temperature. When the system is warming up (back to normal temperature), the moisture will be formed inside the case and may cause damage to the circuit board. 8. Please do not try to open the case. System may be damaged without professional opera!on. 9. Avoid dropping or striking the device. 10. Please use the accompanied or a%ached power supply to operate the device. 11. Do not overload the power plug or extension cord or may cause fire or electric shock.
Maintenance
P.21
