Transcript
datasheet
OCULUS
Hi-Spec Rugged Pan/Tilt Camera
The Oculus is a professional vandal resistant, high speed continuous rotation PTZ camera. The housing has been cast in aluminium which is then hard anodised and powder coated allowing the unit to be installed in harsh and challenging environments. The toughened glass viewing window is optically correct and distortion free providing brighter, clearer images even at full telephoto zoom ratio. With wiper as standard the glass is kept free from build-up of dust or debris and allows the unit to perform in all weather conditions. Utilising Optical Incremental Encoders, Oculus can accurately pin point and maintain it position, automatically correcting itself should an external force cause the head to move. Oculus is available with a range of high resolution day/night zoom camera module options from Sony and Sanyo, allowing maximum flexibility of choice for the user. The unique design allows the Oculus to be mounted upright, inverted or cantered offering complete 360 degree coverage with no blind spots. A range of mounting accessories is available with industry standard 4” PCD mounting platform.
Key features • • • • • • • • • • •
Vandal Resistant Optical Encoders 18x and 36x optical zoom options Flexible Mounting Options Flat toughened Glass Window Day/Night Camera Protected to IP67 Built in wiper Presets and Tours Privacy Masking Multiple Protocols
Professional Imaging Products CCTV
Thermal Imaging
Automotive Solutions
High Definition
Special Projects
Sony Module
18x zoom ¼“ EXview CCD
Lens
18x optical zoom, f=4.1mm (wide) to 73.8mm (tele), F1.4 to F3.0
PAL
Digital Zoom
12x (216x with optical zoom)
Number of total pixels
~440000 pixels
Angle of view (H)
48.0° (wide end) to 2.8° (tele end)
S/N ratio
More than 50dB
Sync system
Internal / External (V-lock)
Electronic shutter
1/1 to 1/10000s, 22 steps
Minimum illumination
0.7lx (typical) (50IRE)
White balance
Auto, ATW, Indoor, Outdoor, One-push, Manual
Gain
Auto, Manual, (-3 to 28dB, 2dB steps)
AE control
Auto, Manual, Priority Mode, Bright, EV compensation, Back-light compensation
EV compensation
-10.5 to 10.5 dB (1.5dB steps)
Back-light compensation
On / Off
Privacy zone masking
On / Off (24 positions)
Focusing system
Auto (Sensitivity: normal, low), One-push AF, Manual, Infinity, Interval AF, Zoom trigger AF
Picture effects
E-Flip, Nega Art, Black & White, Mirror Image
Camera operation switch
Zoom tele, Zoom wide
Video Output
VBS: 1.0 Vp-p (sync negative), Y/C
Camera control interface
VISCA (TTL signal level)
Power consumption
6 to 12V DC / 1.6W (motors inactive), 2.5W (motors active)
Image Sensor Signal System
36x zoom Lens
36x optical zoom, f=3.4mm (wide) to 122.4mm (tele), F1.6 to F4.5
Digital Zoom
12x (432x with optical zoom)
Angle of view (H)
57.8° (wide end) to 1500 mm (tele end)
Sync system
Internal / External (V-lock)
Minimum illumination
1/60 s mode: 1.4lx (typical) (F1.6, 50IRE)
Protocols Vendor
Protocol
Vendor
Protocol
360-Vision
C-Dome
Pelco P
P9600
BBV
Serial485
Philips
2400
CBC
OCP485
Philips
9600
DeView
VTC485
Samsung
SCC2000
Capable of Continuous pan rotation
Forward Vision
FV Mic1-300
Samsung
SCC3000
Capable of 290º tilt rotation
Ikegami
I-LAN
Sensormatic
-
Capable of normal and inverted mounting
Ikegami
RS485
Ultrak / Honeywell
Diamond
Capable of 180º/second pan speed (excluding ramping)
Kalatel
DP
VCL
-
Capable of 180º/second tilt speed (excluding ramping)
Pelco D
D2400
Baxall DC
FSK-Standard
Fitted with sealed for life bearing
Pelco P
P4800
Mechanical
Long life toothed polypropylene belt drive, for minimum backlash-pulleys bonded to keypad shafts
Ordering Information
Rated to IP67 4” pcd mount IP67 Multi way connector to support electrical connection requirements, with 10m composite lead
Electronic
RC-50F18 B,G,W (Black, Grey and White)
18x 1/4”CCD Day/Night PTZ Camera
RC-50D36 B,G,W (Black, Grey and White)
36x 1/4”CCD Day/Night PTZ Camera
Dimensions
Maintaining preset accuracy with optical encoders with a resolution of 0.01º Capable of retaining position without drift Recovering position if forced away by a “non-control” intervention 180ºpan spin on reaching -90º Storage of “wash” preset Storage of 32 preset PTZ positions Storage of 16 preset tours Storage of 4x 1 minute mimic tours 8+8 steps of video gain and lift Up to 24x privacy zones Access to camera configurations via on screen menus Stepper motor drive Multiple control protocols Robust RS485 half duplex data comms, with absolute positioning output Coaxial Telemetry Support for 8 x8 alarm inputs on RS485 bus, external to PTZ unit. (With alarm interface card) In built real-time clock to support extensively configurable alarm events and actions Switch to IR mode via external input (via alarm card) Heavy duty slip rings for power, data, video, switching for washer, and bonded earth for lightning protection Power requirements 20-36Vdc or 14-26Vac. 15W peak . included PSU requires 230V AC
UK Office SILENT SENTINEL Myrtlebank Cautherly Lane Great Amwell Herts SG12 9SN
German Office SILENT SENTINEL Länglingsweg 6a D-47447 Moers Germany
Tel +44 (0) 1920 870868 Fax +44 (0) 1920 872981
Tel +49 2841 887 510 Fax +49 2841 885 720
Email
[email protected] URL www.silentsentinel.com
Professional Imaging Products
