Transcript
Data Matrix Readers
ODT-MAC340 Data Matrix Readers ODT-MAC340
Fixed Mounted Data Matrix ECC 200 and Pharmacode Reader • Extremely high transport speeds • 150 million instructions/second • Reflection suppression
High speed reading – in the most compact way The ODT-MAC340 has been developed to read at very high transport speeds. The following performance data is achieved, through a Data Matrix code with a symbol size of 16 x 16 and a minimum module size of 0.35 mm:
Technical Data ODT-MAC340 SYMBOLOGIES
Pharmacode, Data Matrix ECC 200
SCAN DISTANCE
90mm
DEPTH OF FIELD
±7mm
SCAN AREA
20 x 15mm
LIGHT SOURCE
• 25 evaluations per second
Data Matrix ECC 200 26 x 26 Module
• 6 m/s transport speed of object
EVALUATION RATE TRANSPORT SPEED MAX. DATA MATRIX
• Omnidirectional reading
Integrated LED-Flash (red)
• Progressive scanning • Processing of 256 grey values; adaptive grey value threshold
SYMBOL SIZES
6m/s Square: 48 x 48 module max. Rectangular: 16 x 48 module max.
MODULE SIZE
0.17mm minimum
DATA FORMAT
ASCII, C40, Text, X12, Edifact, Base 256, all ISO 646
ORIENTATION
DSP for higher performance
25Hz
MAXIMUM DATA CAPACITY
Omnidirectional 348 numerical, 259 ASCII, 172 Bytes
ODT-MAC340 9/22/04
The digital signal processor works in real time. This means a processing rate of approximately 150 million instructions per second. Decoding takes place in the reader. Extensive external processor performances are not necessary.
INPUTS
Omnidirectional reading
INTERFACES
The ODT-MAC340 reads Data Matrix code omnidirectionally. It is no longer necessary to read codes on the lids of cylindrical (bottles, vials, cans, etc.) objects. The code can be placed anywhere on the cylindrical object and will always be read as long as the image area is sighted. The Finder Pattern, a special feature in the Data Matrix code, allows the ODT-MAC340 reader to determine the position and arrangement of the code.
TRANSMISSION
9.6-115.2 k baud
LED DISPLAY
Trigger, Good, Fail
OUTPUTS
CONNECTORS POWER SUPPLY AMBIENT TEMPERATURE HOUSING PROTECTION CLASS
Glossy surfaces? -the solution is built in!
DIMENSIONS
High-gloss surfaces reflect the emitted light back to the receiver. With the ODT-MAC340, it is no longer necessary
WEIGHT
PEPPERL+FUCHS
1 Trigger 24VDC (up to 4 inputs optional) 2 x opto-coupled (up to 4 outputs optional) 1 x RS-232 (2 x RS-232 optional)
VGA, 15-pin D-sub, 0.5m cable 24VDC, 5W 0ºC to +45ºC Anodized aluminum IP65 65 x 84 x 132mm 730g
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail:
[email protected]
1
Data Matrix Readers
to to angle or tilt the object to get a good read. The ODT-MAC340 has an optical anti-mirror system—built-in reflection supression.
Data Matrix Readers ODT-MAC340
Ambient light ? - no problem ! The high-energy flash of the ODT-MAC340 is precisely synchronized with the camera functions and the trigger signal. Only 27 microseconds are necessary to “freeze” the picture. This short flash period also reduces light pollution and prevents negative effects to the human eye. The solid-state light source is not subject to deterioration. Heat generation and power consumption are reduced to a minimum.
Flexible interface – speedy data transfer Fast production requires even faster data transmission. The ODT-MAC340 reader not only enables the physical interface RS-232 and allows the adaptation of different protocols, it also achieves transfer rates of 115 k baud under real conditions.
Adjustment and so on...
The mechanical adjustment of the ODT-MAC340 is very simple. The optical module, consisting of light source, optics and CCD chip can be turned 90° simply by loosening two screws. By rotating the module to the side window, the mounting height can be reduced and the cables installed parallel to the scanning surface.
OMNICONTROL – software for the user OMNICONTROL for Windows (Windows 95 or higher) serves to alter the configuration. The program is designed to be user friendly and also offers various functions for error diagnosis. Once a set of parameters is chosen, this specific configuration may be stored in the PC or downloaded to the ODT-MAC340. Information remains in the nonvolatile memory until a different configuration is transmitted.
Two operating modes as a choice The ODT-MAC340 can transmit the acquired data via the serial interface. As an alternative, the Matchcode Mode can be chosen. This mode offers the possibility of storing reference data that is compared with the actual read data. Depending on the result, respective Good/Fail outputs are activated.
ODT-MAC340 9/22/04
A VGA-monitor output is provided to connect a standard PC-monitor. The image of the ODT-MAC340 can be displayed continuously and in real time. In addition, to the optical adjustment of th OPT-MAC340, the quality of the picture taken by the device can be precisely evaluated.
Optical module - 90° turnable
2
PEPPERL+FUCHS
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail:
[email protected]
Data Matrix Readers
ODT-MAC344 Data Matrix Readers ODT-MAC344
Fixed Mounted Data Matrix ECC 200 and Pharmacode Reader • Extremely high transport speeds • Compact sensor unit • Separate evaluation box
Technical Data ODT-MAC344
High speed reading – in the most compact way The ODT-MAC344 has been developed to read at very high transport speeds. The following performance data is achieved, through a Data Matrix code with a symbol size of 16 x 16 and a minimum modul size of 0.35 mm:
SYMBOLOGIES
Pharmacode, Data Matrix ECC 200
SCAN DISTANCE DEPTH OF FIELD
Integrated LED-Flash (standard white, optional red)
LIGHT SOURCE EVALUATION RATE TRANSPORT SPEED MAX. Data Matrix ECC 200 26 x 26 Module
25Hz 6m/s
SYMBOL SIZES
Square: 48 x 48 module max. Rectangular: 16 x 48 module max.
MODULE SIZE
0.25mm minimum
• Progressive scanning
DATA FORMAT
ASCII, C40, Text, X12, Edifact, Base 256, all ISO 646
• Processing of 256 grey values; adaptive grey value threshold
ORIENTATION
Omnidirectional
• 6 m/s transport speed of object
DATA MATRIX
±3mm 29 x 24mm
SCAN AREA
• 25 evaluations per second
32mm
• Omnidirectional reading
DSP for higher performance The digital signal processor works in real time. This means a processing rate of approximately 150 million instructions per second. Decoding takes place in the reader. Extensive external processor performances are not necessary.
MAXIMUM DATA CAPACITY
1 Trigger 24VDC (up to 4 inputs optional)
INPUTS
2 x opto-coupled (up to 4 outputs optional)
OUTPUTS INTERFACES
1 x RS-232
TRANSMISSION
Omnidirectional reading
9.6-115.2 k baud
AMBIENT TEMPERATURE
ODT-MAC344 9/22/04
The ODT-MAC344 reads Data Matrix code omnidirectionally. It is no longer necessary to read code on the lids of cylindrical (bottles, vials, cans etc.) objects. The code can be placed anywhere on the cylindrical object and will always be read as long as the image area is sighted. The Finder Pattern, a special feature in the Data Matrix code, allows the ODT-MAC344 reader to determine the position and arrangement of the code.
Glossy surfaces? -the solution is built in! High gloss surfaces reflect the emitted light back to the receiver. With the ODT-MAC344, it is no longer necessary
POWER SUPPLY
24VDC, 5W
PROTECTION CLASS
EVALUATION BOX
IP54
LED DISPLAY
Good, Fail
DIMENSIONS
65 x 40 x 66mm (without cable)
WEIGHT
250g
HOUSING
Anodized aluminum
DIMENSIONS WEIGHT
PEPPERL+FUCHS
0ºC to +45ºC VGA, 15-pin D-sub plug for power supply and communication, 44-pin D-sub socket for sensor
CONNECTORS
SENSOR
348 numerical, 259 ASCII, 172 Bytes
137 x 84 x 58mm 500g
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail:
[email protected]
1
Data Matrix Readers
to angle or tilt the object to get a good read. The ODTMAC344 has a built-in optical anti-mirror system—built-in reflection suppression.
Data Matrix Readers ODT-MAC344
Ambient light ? - no problem ! The high-energy flash of the ODT-MAC344 is precisely synchronised with the camera functions and the trigger signal. Only 27 microseconds are necessary to “freeze” the picture. This short flash period also reduces light pollution and, therefore, prevents negative effects to the human eye. The solid-state light source is not subject to deterioration. Heat generation and power consumption are reduced to a minimum.
Flexible interface – speedy data transfer Fast production requires even faster data transmission. The ODT-MAC344 reader not only enables the physical interface RS-232 and allows the adaptation of different protocols, it also achieves transfer rates of 115 k baud under real conditions.
Adjustment and so on...
The mechanincal adjustment of the ODT-MAC344 is very simple. The optical module, consisting of light source, optics and CCD chip, can be turned 90° by simply loosening two screws. By rotating the module to the side window, the mounting height can be reduced and the cables installed parallel to the scanning surface.
OMNICONTROL – software for the user OMNICONTROL for Windows (Windows 95 or higher) serves to alter the configuration. The program is designed to be user friendly and also offers various functions for error diagnosis. Once a set of parameters is chosen, this specific configuration may be stored in the PC or downloaded to the ODT-MAC344. Information remains in the nonvolatile memory until a different configuration is transmitted.
Two operating modes as a choice The ODT-MAC344 can transmit the acquired data via the serial interface. As an alternative, the Matchcode Mode can be chosen. This mode offers the possibility of storing reference data that is compared with the actual read data. Depending on the result, respective Good/Fail outputs are activated.
ODT-MAC344 9/22/04
A VGA-monitor output is provided to connect a standard PC-monitor. The image of the ODT-MAC344 can be displayed continuously and in real time. In addition to the optical adjustment aid of the OPT-MAC344, the quality of the picture taken by the device can be precisely evaluated.
Optical module - 90° turnable
2
PEPPERL+FUCHS
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail:
[email protected]
Data Matrix Readers
ODT-MAH100 Data Matrix Readers ODT-MAH100
Handheld Reader for Data Matrix ECC 200 and Barcode • Accurate, high resolution • Reads 1-D and 2-D codes • Lightweight and comfortable
Small, light and ergonomic
Technical Data
ODT-MAH100 inaugurates a new guidance concept for the operator. The handheld device is light and comfortable in the hand, similar to the previous, very popular pen scanners. It is especially easy to read 2-D and 1-D codes, especially on documents and labels. A very accurate laser targeting system enables the exact positioning over the code. The high density Data Matrix Codes are read accurately, quickly and of course omnidirectionally.
ODT-MAH100 2-D CODES READING DISTANCE 1-D CODES READING DISTANCE READING ANGLE
CMOS Technology – a high resolution reader The high resolution CMOS technology allows not only the identification of very small Data Matrix codes, it also guarantees the evaluation of bigger barcodes. Different optical configurations are not necessary.
Interface - on request
AMBIENT LIGHT RESISTANCE
Data Matrix ECC 200 18-57mm (0.2mm min. module size) Code 39, Code 128, EAN, UPC 18-52mm (0.1mm min. module size) ≤45º omnidirectional ≤100,000 lux
LENGTH
180mm
DIAMETER
30mm
WEIGHT AMBIENT TEMPERATURE INTERFACE
51g (without cable) 0ºC to +40ºC Keyboard (standard) RS-232 (option) PC-Card (option)
The ODT-MAH100 comes equiped with a keyboard wedge. An additional power supply is not necessary. An RS-232 connection with an external power supply is available as an option. The latest improvement is a model with PC-Card Interface that allows communication to a Palmtop processor. ODT-MAH100 9/22/04
PEPPERL+FUCHS
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail:
[email protected]
1
Data Matrix Readers
ODT-MAH200 Data Matrix Readers ODT-MAH200
Cabled, Batch, and Cordless Universal Readers • Impressive operating ranges • Small, yet extremely durable • Time stamp for logging data
ODT-MAH200 is a revolutionary, new bar code reader. Developed to be the first universal reader, no other single device performs as many functions. With a cost far less than comparable systems, the ODT-MAH200 incorporates a unique dual path optical system, a 1.3 million pixel CMOS sensor, and a 400 MHz processor. This combination has created a reading system that supports:
Technical Data ODT-MAH200 SYMBOLOGIES
• High density matrix codes and larger low density linear codes
AMBIENT TEMPERATURE
• Superior working range
SENSOR
• High-speed omnidirectional decoding
OPTICAL RESOLUTION
• Cordless and cabled interfaces
TARGET BEAM
• Unsurpassed data rates
INTERFACE
The ODT-MAH200 sets a new benchmark for size and weight. It is smaller and lighter than comparable systems yet can withstand multiple drops onto a concrete floor. It is the only product available in handheld, gun handle, and presentation-stand form factors with cabled, batch and cordless versions. The cordless version utilizes the latest BluetoothTM class 1 interface with a 300 foot operating range. Rugged and lightweight, the cordless version will operate for more than a complete shift at the highest use rate. The ODT-MAH200 performs more than 4000 reads and transmits from a single battery charge. ODT-MAH200 9/22/04
Rugged and light The ODT-MAH200 is rugged and versatile enough for the most demanding warehouse and production applications, yet rapid and economical enough for point-of-sale applications. Small and light enough to be used in parcel tracking, the ODT-MAH200 features a 1300 milliamp lithium-ion battery and 8 MB of nonvolatile memory, outperforming all other store and forward devices.
PEPPERL+FUCHS
MaxiCode, PDF417, Data Matrix, QR Code, MicroPDF 417, GoCode, UCC Composite, Aztec Code, Code 39, Code 128, UPC, EAN, JAN, Int 2 of 5, Codabar, Code 93, UCC RSS, POSTNET, PLANET, Japanese Post, Australia Post, Royal Mail, RM4SCC, KIX Code 0ºC to +40ºC CMOS (1024 x 1280) 1024 x 640 Laser diode 630nm USB (standard) and RS-232, Bluetooth Class 1 Interface
DIMENSIONS
33 X 109 X 46mm
WEIGHT
51g (without cable)
1-D Codes or 2-D Codes, small or big ODT-MAH200 automatically distinguishes between all major 2-D matrix and linear barcode symbologies and features a time stamp feature for logging data. Whether you need a small, palm-held device or a traditional gun, ODT-MAH200 is specifically developed to enable users to easily choose the device that best meets their needs. The ODT-MAH200 is available in three basic configurations: • ODT-MAH200 Cabled – USB, or RS-232 • ODT-MAH200 Batch – Store and forward device with memory and long-life battery • ODT-MAH200 Cordless – Long-life battery and Bluetooth interface
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail:
[email protected]
1
Data Matrix Readers ODT-MAH200
Data Matrix Readers
ODT-MAH200 Cabled
ODT-MAH200 Cordless
The ODT-MAH200 cabled version is available with USB (standard) or RS232 interfaces. All cables use rugged, automatic locking adapters that allow users to change cables, but prevent inadvertant disconnections.
The ODT-MAH200 cordless version features a class 1 Bluetooth interface with a 300 foot operating range. The ODT-MAH200 communicates seamlessly with desktop PCs, laptop PCs, PDAs, printers, cell phones, point of sale devices, LAN and WLAN routers. ODT-MAH 200 offers 6000 reads and transmits over 8 hours of standby time.
ODT-MAH200 Batch (Store-Forward) The ODT-MAH200 Batch version features a 1300 milliamp lithium-ion battery with a 6200 scan lifespan plus 8 hours of standby time. The unit features 8 MB of nonvolatile memory and automatically recharges when connected via the USB interface.
20 mil PDF 417 4.0in./ 10.2cm
20.8 mil Data Matrix 15.8 mil Data Matrix
2.0in./ 5.1cm
Imager
7.5 mil Data Matrix
Near Field Optimal Focal Point 4.6”
0.0in./ 0.0cm
Far Field Optimal Focal Point 10.5”
2.0in./ 5.1cm
4.2 mil Code 39
5.8 mil Code 39
4.0in./ 10.2cm
Maxicode
7.5 mil Code 128
12.5 mil UPC
14.2 mil Code 128
20.8 mil Code 39
4.0in./10.2cm
8.0in./20.3cm
12.0in./30.5cm
Near Field Decode Zone
2
PEPPERL+FUCHS
16.0in./40.6cm
Neutral Decode Zone
20.0in./50.8cm
Far Field Decode Zone
Pepperl+Fuchs® Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail:
[email protected]
ODT-MAH200 9/22/04
0.0in./0.0cm
