Oeg Signal Relays

Transcript

OEG OEG Issued 3-03 Ordering Information OUAZ -SS -1 12 Ordering Information L M OUAZ -SS Typical Part Number B ,900 Signal Relays -1 12 L M ,900Typi 1. Basic Series: OUAZ = Miniature, sealed PC board relay. 1. Basic Series: OUAZ = Miniature, sealed PC board relay. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 3. Termination: 1 = 1 pole OEG Signal PCB Relay OUAZ n 1pole, 1A, 1form A (NO), 1 form C (CO) 4. terminal Coil Voltage: n 2.54mm pitch same as I.C. socket terminal pitch 03 = 3VDC 06 = 6VDC 12 = 12VDC n Gold overlay 05 =AgPd 5VDCalloy contact 09 = 9VDC 24 loads = 24VDC suitable for low 5. Coil Input: L = Sensitive D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT 06 = 6VDC 09 = 9VDC 5. Coil Input: L = Sensitive D = Standard 12 = 12VDC 24 = 24VDC 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,900 = Standard model 4. Coil Voltage: 03 = 3VDC 05 = 5VDC 7. Suffix: ,900 = Standard model Other Suffix = Custom model Typical applications * Not suitable for immersion cleaning processes. Telecommunications, office machine M = 1 Form Other Suffix = Custom m * Not suitable for immersion cleaning processes. UCt Our authorized distributors are more likely to stock the following items for immediate delivery.distributors are more likely t ms for immediate delivery. Our authorized None at present. None at present. Approvals Coil Data (continued) UL E82292, CSA LR48471, TuV R50138762 (Z) Coil versions, DCDiagram coil Wiring (Bottom View) Outline Dimensions Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW Standard coil, 450mW 05 5 3.5 0.25 55 .441 ± .02 450 11.2 ± .5 06 6 4.2 0.3 80 450 09 9 6.3 0.45 180 450 12 12 8.4 0.6 320 450 24 24 16.8 1.2 1.280 450 Sensitive coil, 200mW .018 .023 .008125 05 5 3.75 (.6) 0.5 .023 200 (.45) (.2) 06 6 4.5 0.6 (.6) 180 200 .409 ± .02 09 9 6.75 0.9 400 200 10.4 ± .5 12 12 9.0 (Bottom1.2 700 200 PC Board Layout View) 24 24 18.0 2.4 2800 .299 ± .008 200 data of approved types on request Diagram Technical (Bottom View) Outline Dimensions Contact Data Contact arrangement 1 form A (NO), 1 form C (CO) Rated voltage 24VDC, 120VAC Max. switching voltage .441 ± .02 24VDC, 120VAC 11.2 ± .5 Rated current 1A Switching power 120VA, 30W Contact material AgPd Alloy Min. recommended contact load 1mA at 1VDC Initial contact resistance 50mΩ at .018 100mA, 6VDC .016 .023 .008 (.40) Frequency of 72000h (.45) -1 (.6)operation .023 (.2) (.6) .409 ± .02 Operate/release time max. 10.4 ± .5 standard coil 5/7ms sensitive coil 10/7ms rd Layout (Bottom View) Electrical endurance .299 ± .008 5 – .04 DIA. 1A, 120VAC, resistive, 7.6 ± .2 100x103 ops. (1.0) 1A, 24VDC, resistive, 100x103 ops. Contact ratings 1A, 120VAC/24VDC .063 .299 .098 ± .008 Mechanical 10x106 operations (1.6)endurance .299.063 Initial dielectric strength (1.6) (7.6) between open contacts between contact and coil .098version (Z) high insulation (2.5) Initial surge withstand voltage .397 between contact and coil (10.1) Clearance/creepage between contact and coil 2.5 ± .2 .40 ± .008 ± .2 Coil Data 10.1 .606 ± .02 Magnetic system 15.4 ± .5 Coil voltage range 5 to 24VDC Reference Data 100 Operate Time Operate time 60 24VDC Resistive 40 Time (msec) Temp. Rise (°C) Operation (x 104) 50 10 120VAC Resistive 30 20 1 12 100 60 10 50 8 0.10.4 0.2 0.6 0.3 6 Operate Time 4 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company rms 1500V (10/160μs) 1.5/1.76mm 0.8 0.4 0.51.0 0.6 0.7 1.2 O 12 10 40 120VAC Resistive 10 30 20 0.1 0.2 Dimensions are in inches over www.tycoelectronics.com Technical support:(millimeters) unless otherwise specified. Refer to inside back cover. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 0.3 0.4 0.5 0.6 0.7 1 8 6 4 2 10 Coil Power Contact Current (A) (W) Dimensions are shown for Specifications and availability subject to change. 320 reference purposes only. .606 ± .02 15.4 ± .5 24VDC Resistive Release Time 0.2 .40 ±1000V .008 rms 10.1 1500V ± .2 Life Expectancy Coil Temperature Rise Coil temperature rise 2 10 0.7 .098 ± .008 2.5 ± .2500Vrms Reference Data Coil Temperature Rise Life Expectancy Electrical endurance e 6 Insulation Data Time (msec) 098 2.5) .397 10.1) 5 – .04 DIA. All figures are given for coil without pre-energization, at ambient temperature 7.6 +23°C. ± .2 (1.0) Temp. Rise (°C) 4 Operation (x 10 ) (7.6) .0 (. 0.1 0.20.2 0.4 0.3 0.40.6 0.5 0.80.6 1.0 0.7 1.2 Contact Current Coil Power (W) (A) Coil Power (W) Specifications Dimensions and availability are shown for subject to change. reference purposes only. 320 Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions www.tycoelectronics.co Dimensions are Technical(millimeters) support: u Refer to inside back cov specified. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Catalog 121308242 = 12VDC Issued 24 3-03 = 24VDC C C OEG dard Number OUAZ -SS B 7. Suffix: ,900 = Standard model -1 12 Other Suffix = Custom model * Not suitable for immersion cleaning processes. L Signal M Relays ,900 OEG M = 1 Form A, SPST-NO Our authorized distributors are more likely to stock the followi Signal PCB Relay OUAZ (Continued) None at present. Other Suffix = Custom model processes. Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter ors are more likely to stock the following items for immediate delivery. Ambient temperature standard coil -30 to 60°C sensitive coil -30 to 70°C Category of environmental protection IEC 61810 RTII - flux proof, Diagram (Bottom View) WiringRTIII - wash tight O Vibration resistance (functional) 10-50Hz, 1.5mm double amplitude Shock resistance (functional) IEC 60068-2-27 (half sine) 98m/s2, 11ms Terminal type PCB-THT 1 ± .02 .2 ± .5 Weight 3.5g Resistance to soldering heat THT IEC 60068-2-20 260°C/5s Packaging/unit tube/25 pcs., box/2000 pcs. Dimensions Outline Dimensions .441 ± .02 11.2 ± .5 .023 (.6) .299 ± .008 7.6 ± .2 the following items for immediate delivery. .098 ± .008 2.5 ± .2 .40 ± .008 10.1 ± .2 Terminal assignment PCB layout PC Board Layout (Bottom View) Bottom view on solder pins Bottom view on solder pins Wiring Diagram (Bottom View) 9 ± .008 6 ± .2 .606 ± .02 15.4 ± .5 5 – .04 DIA. (1.0) Reference Data .299 (7.6) Coil Temperature Rise PC Board Layout (Bottom View) Product code structure Operate Time Typical product code Life Expectancy 5 – .04 DIA. 12 (1.0) specified. Product Operate Time code Operation (x 104) Time (msec) 0.6 10 120VAC Resistive Version Contact 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 60 12 50 10 40 8 30 OUAZ -SS 12 D 6 M 20 O ,900 4 2 Release T 120VAC Resistive Dimensions are shown for 320 reference purposes only. 0.4 0.6 0.5 0.6 0.7 0.1 0.2 Coil Power (W) 0.8 1.0 Dimensions are in inches over (millimeters) unless otherwise specified. 1.2 www.tycoelectronics.com Technical support: Refer to inside back cover. 450mW 450mW 450mW 200mW 200mW 200mW 450mW 450mW 450mW 200mW 200mW 200mW Coil voltage Sealing 5VDC Flux proof 12VDC 24VDC 5VDC 12VDC 24VDC 5VDC Wash tight 12VDC 24VDC 5VDC 12VDC 24VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 0.3 0.4 Coil Power (W Contact Current (A) Cont.material Coil power Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 1 24VDC Resistive 0.2 0.3 0.1 0.4 OUAZ-SS-105D,900 1A 1 form C (CO) AgPd Alloy OUAZ-SS-112D,900 OUAZ-SS-124D,900 OUAZ-SS-105L,900 Release Time OUAZ-SS-112L,900 1 0.6 1.0 0.8 .2 0.3 1.2 0.4 0.4 OUAZ-SS-124L,900 0.5 0.6 0.7 0.2 OUAZ-SH-105D,900 Contact Current (A) Coil Power (W) OUAZ-SH-112D,900 www.tycoelectronics.com Specifications and availability ver OUAZ-SH-124D,900 Technical support: subject to change. ise OUAZ-SH-105L,900 Refer to inside back cover. OUAZ-SH-112L,900 OUAZ-SH-124L,900 2 Operate Time 10 Operation (x 104) 100 Type OUAZ Signal PCB Relay OUAZ .299 Sealing 10 (7.6) SS Flux proof SH Wash tight 8 Pole 1 .098 1pole (2.5)6 10 Coil Operate Time .397 coil code: please refer to coil versions table (10.1) 4 Coil Power D 2 Standard 540mW L Sensitive 200mW Contact Arrngement Release Time Life ExpectancyM 1 form A (NO) 1 Blank 1 form C (CO) 0.2 0.3 0.1 0.4 0.5 0.6 0.7 0.7 0.2 Insulation 100 Blank Standard Coil Power (W) Z High Insulation (1500V) Suffix Specifications and availability Dimensions are in inches over to change. (millimeters) unless otherwise ,900 Standard ,800 subject High Insulation (1500V) 24VDC Resistive Temp. Rise (°C) .098 (2.5) .397 (10.1) me 0.5 .063 (1.6) .016 (.40) Time (msec) .018 (.45) .409 ± .02 10.4 ± .5 .016 (.40) .018 (.45) .409 ± .02 10.4 ± .5 .008 (.2) .023 (.6) Part number 8-1419130-3 5-1419145-7 1461015-1 8-1419130-6 1419131-5 1-1419131-1 3-1419145-9 5-1419130-6 1461015-4 4-1419145-0 6-1419130-5 4-1419145-8 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.