Of Osm-lum Ctl Decision Sheets September 2017

Transcript

INDEX OF OSM-LUM CTL DECISION SHEETS September 2017 CTL – ETF5 (LITE – SAFE) LUMEX INTERPRETATION PANEL OPERATIONAL STAFF MEETING LUMINAIRES No. SUB-CLAUSE SUBJECT IEC/EN 60598-1 DSH 0807 General Luminaires system for 230V DSH 0809 + Fig. General / 1.7 Fixed luminaire with track DSH 0811 General Luminaires for the use with independent control gear General T8 to T5, T8 to T8 and similar lamp adaptors (including ditto with General Insulation class MCPCB material used for LED modules DSH 0808 DSH 0810 DSH 0813 DSH 0814 DSH 1086 DSH 0816A General General General 1.2.60 2.2 Metallic paint E27 to G9 and GU10 lampholders adapters LED) 0.4 Socket-outlet mounted rechargeable luminaire Rechargeable lamps luminaires Floodlight with mounting accessories DSH 0819 0.4.2 / General Luminaires needing assembly by the user DSH 0821 0.5 DSH 0817 + Fig. DSH 0818 DSH 0820 0.2 IEC 62262 / EN 50102 0.4.2 Instruction manual of a floodlight 0.4.2 / 12 Luminaires needing reconnection by the installer DSH 0822 0.5 Series – compensated luminaire (working voltage) DSH 0824 0.5 Luminaire marked for lamp GU 5,3 DSH 0823 0.5 Use of 230V components in 240V luminaires Connecting device with fuse holder 0402/10 OSM/LUM 0403/10 OSM/LUM 0.5 0.5 DSH 2004 0.5 0404/10 OSM/LUM 1.2.60 DSH 2057 0.5 Components Luminaires provided with socket-outlets Requirement on batteries as critical component Simplify the acceptance of replacement of LED modules in luminaires and LED packages/chips in LED modules T5 adapter DSH 0825 1.2.81 / 4.14.3 DSH 0826 Sections 2- 3 DSH 0827 3 DSH 0829 3 Marking of lamp types according to IEC Technical Specification 61231 Marking on class III luminaires “system” 3.2.2 Rated voltage marking DSH 0828 DSH 0830 DSH 0831 3 3.2 Temperature of “means of adjustment” Classification and marking of Class II with Class III detachable parts Definition of basic type reference Marking on small luminaires DSH 0832 3.2.6 Marking with IP numbers DSH 0834 3.2.6 / 9.2 IP test on recessed luminaires PDSH 0836 3.2.13 Symbol for minimum distance from lighted object 3.3 Markings / additional information DSH 0833 DSH 0835 3.2.6 3.2.8 DSH 0837 3.2.16 DSH 0839 3.3.10 DSH 0838 DSH 0840 DSH 0841 3.3.7 / 4.24 Annex P 4.2 / 8.2.1 DSH 0843 4.4.4 DSH 0842 “IP X8” marking Lamp-type information marking Protective shields Marking – Additional information UV radiation Luminaire with fuse holder / fuse 4.2 / 15.7 Non-detachable flexible cable or cord DSH 0844 4.4.4 ii) Lampholder mounting brackets DSH 0846 4.7.3 DSH 0848 4.8 DSH 0845 + Fig. DSH 0847 Lampholder fixed by the shade ring 4.7.2 Supply terminals (8 mm free wire) 4.7.4 Terminals for internal and external connections Lampholder terminals Switches for luminaires DSH 0849 DSH 1052 4.10 Insulation required for external and SELV wiring 8.2.1 Surge protectors 4.10 / 7.2.10 DSH 0850 4.10.1 Double and reinforced insulation DSH 0852 4.11 / 4.12 Luminaires to be assembled by user DSH 0854 4.11.3 Screw connections DSH 0851 DSH 0853 DSH 0855 4.11.1 4.11.3 Contact pressure Locking device for screws 4.11.3 Electrical connections DSH 0857 4.11.3 / 7.2.4 Rivets for electrical and mechanical connections DSH 0859 4.11.5 Wooden parts on luminaires DSH 0861 4.14 DSH 0856 DSH 0858 DSH 0860 DSH 0862 4.11.3 / 7 4.11.4 Portable luminaire; different parts can be loosen by hand 4.14 Suspension devices for recessed luminaire 4.14.1 Clip-mounted luminaire: pulling test 4.14.3 Stop rotation adjustable luminaire 4.15 Heated part 4.14.1 DSH 0865 4.14.3 DSH 0866 4.15 DSH 2002 DSH 0867 DSH 0869 Material with equivalent characteristics 4.12.4 DSH 0863 DSH 0864 Crimped connections 4.15 / 12.7.1 Suspension devices Clip-mounted luminaire Screw adjustable by the user Flammable materials Application of the linear regression formula DSH 0870 A + Fig. 4.15a) / 12.7.1 Luminaires in thermoplastic material (fixing points) DSH 0873 4.24 Annex P DSH 0872 DSH 0874 DSH 0875 DSH 0876 DSH 2052 4.16.2 / 12.6.2 4.24 Temperature sensing controls Annex P 4.24 Use of different M.H. lamps 4.24 Optical radiation safety 4.24 Protective shield DSH 0877 5.2 Non standardised plug for class III luminaire DSH 0878 5.2.2 Insulation required on a cable (SELV operating) DSH 0880 5.2.2 / 5.3.5 Internal wiring for ordinary luminaires DSH 0879 5.2.2 DSH 0881 5.2.2 / 7.2.11 DSH 2049 5.2.10.1 DSH 0882 5.2.10 External wiring for low voltage luminaire Transparent flexible cords Cord anchorage LED floodlights DSH 0883 5.2.10 / 5.3.5 DSH 0885 5.2.10 / 5.3.5 DSH 0887 5.3 Compatibility between connectors for Class II and Class III luminaires PTFE basic insulated cable DSH 0889 5.3.1 Through wiring in the luminaires PDSH 2091 5.3.5 DSH 0884 DSH 2035 DSH 0888 DSH 0890 5.2.10 / 5.3.5 20.12 5.3 5.3.3 DSH 2050 7 DSH 0892 7.2.1 DSH 0895 A 8 DSH 0893 DSH 0896 DSH 0897 7.2.1 8.2.1 Cord anchorage on lampholder Cord anchorage on adjustable luminaire Recessed luminaire delivered with separate control gear Internal wiring for some lamp circuits Use of additional sleeves Use of H03VH7-H 1x0.75 mm² cables for suspended part of pendant luminaire Connection between metal parts of Class I luminaire and earthing terminal by special fastener fixed to the cover of the luminaire Earthing in luminaire system Electrical connections Standard test finger Luminaires with LEDs 8.2.1 Live metal parts projected from Edison screw caps 8.2.3 Class II luminaire with metal reflector DSH 0901 8.2.3 Luminaire with PGZ12 lamp cap DSH 0903 A 9 DSH 0898 + Fig. 8.2.1 / 8.2 DSH 0900 8.2.3 DSH 0899 DSH 0902 + Fig. 8.2.5 G10q – connector’s construction Metal fixing devices for components Class II luminaires for discharge lamps IP 65 luminaire DSH 2051 9 IP recessed luminaire 9.2 Torque for fixing screws of covers 9.2 IP 6X DSH 0905 9. / 9.2 DSH 0907 9.2 DSH 0908 + Fig. 9.2 f Entry of test probes for IP 3X and 4X 11 Distances inside a lamp DSH 0906 DSH 2003 IP X3 / IP X4 tests Test for ingress of moisture DSH 0909 + Fig. 9.2.0 DSH 0912 11 Supply terminals – creepage distances and clearances DSH 2034 11 PTI DSH 0911 DSH 0913 11 IP 40 Touch lamp Creepage and clearances between a metal reflector and the cap of DSH 0914 A + Fig. 11.2 DSH 0916 11.2.1 Creepage distances and clearances at a supply terminal DSH 0919 A 12 Luminaires provided with LEDs DSH 0918 12 a fluorescent lamp Endurance and thermal tests DSH 0921 12 – Table 12.2 Temperature limits for rubber cables DSH 0924 12.4.2 Sleeve for earthing supply cable DSH 0923 DSH 0925 A 12.4.1 12.5.1 Temperature limit on terminal block Abnormal operation condition DSH 0926 12.5.1.4) Luminaire inoperative after the test DSH 0928 13.2.1 Ball pressure test on soft thermoplastic 13.3.1 Needle flame test / glow wire test DSH 0927 DSH 0929 DSH 0930 DSH 1084 PDSH 2089 DSH 0931 DSH 0932 + Table 1 12.7.1 13.2.1 13.3.1 Fault condition test Temperature for ball pressure test Needle flame test to switch 14 - 15 NEMA socket (connector) for luminaires Annex C Luminaires for M.H. lamps Annex C Self-ballasted lamps luminaires