Offering Multi-services Over Fiber Optics Yg1600f

Transcript

Offering Multi-Services over Fiber Optics YG1600F The advantages of YG1600F are its simple usage and a vast feature of integration and configuration. The YG1600F achieves this goal by aggregating 16 G.703 E1 data streams over a redundant fiber link and utilizing diversified modular design. With its combined interfaces on tributary E1, Serial Data and 10/100 LAN ports, the YG1600F easily connects to SDH/PDH network as well as maximizes application flexibilities at users’ premises. The 1+1 optical line Automatic Protection Switching (APS) provides fiber redundancy. While operating in APS mode, signal transport is switched form Main to Standby Card if a failure occurs in Main Card or a faulty fiber is being identified. YG1600F features Automatic Laser Shutdown preventing laser device from unnecessary transmitting when no optical signal are received from the remote peer. YG1600F is equipped with an Alarm Card, which output user configurable visible and audible alarm via dry delay contact, notifying network administrators for a prompt attention. It can be managed locally by connecting a VT-100 emulated PC to the CID port or remotely through Telnet/SNMP access all on front panel of the unit. Administration, Maintenance, and Provisioning (OAM&P) are provisioned with the use of 512Kbps embedded operation channel (EOC) that runs through the fiber link. Configured with individual IP address for local and remote unit, YG1600F is accessible to the Internet users who manage the units from a far end place. The Order Wire feature offers craft person handy voice call over the fiber links for management or maintenance purpose. To ensure operation continuity and accommodate field requirement, YG1600F offers power redundancy and multiple choices of AC and DC power. Features Compact comprehensive multi-service interface: E1, Data port and LAN Application flexibilities including six different Interface Cards. Built-in V.35 DSU/CSU supports NX64Kbps data port service with V.35 interface equipped Built-in LAN DSU/CSU supports NX64Kbps data port service with LAN interface equipped 512Kbps EOC channel for OAM&P Support BIP-8 line error detection Support optical 1+1 Automatic Protection Switching and Automatic Laser Shutdown Support power redundancy and power sources in AC and or DC combination. Yoda Communications, Inc. www.yoda.com.tw 2F, No. 3-1, Industry East Road IX, Science Based Industrial Park, HsinChu, Taiwan Tel:+886-3-563-2323 Fax:+886-3-563-6420 Specifications System 2 fiber optic interface plug-in slots for single fiber link or optional 1+1 optical protection mode Automatic Laser Shutdown [ALS] 4 tributary interface cards: E1, data port and LAN Power can be fully redundant by two power modules E1 interface module Number of E1 input: 1 - 4 E1 frame: PCM31, PCM31C, PCM30, PCM30C and unframed Meet ITU-T G.703 and G.704 standard Line code: HDB3 Rates: 2.048Mbps +/- 50 ppm Impedance: 75 ohm unbalanced or 120 ohm balanced, software programmable Jitter requirements: Meet ITU-T G.823 Data port + E1 interface mod ule Data port: : Rates: N x 64Kbps, N=1 - 32, 2E1, 3E1 or 8.68 Mbps Interface type: V.35, V.36, RS-449, RS-520, X.21 software selectable Timing: internal, ST and TT Control signals: always on or standard [DCD, DTR, DSR, RTS, CTS, LL, RL and TM] E1 interface: Number of E1 input: 1 – 4 LAN + E1 interface module LAN Interface: 10/100 Base-T, IEEE 802.3 MAC Address filtering bridge which supports up to 128 MAC address learning Data rate: N x 64Kbps, N=1 - 32, 2E1, 3E1 or 8.68 Mbps Bridge: IEEE 802.1 D self learning Connector: RJ-45 E1 interface: Number of E1 input: 1 – 4 Fiber interface Line rate: 34.56Mbps Optical central wavelength: 1330 nm [default], 1550 nm[optional] Connector type: SC Duplex connector [Default], PC/FC [optional] Optical transmitted power [Pt]: -3 dBm, nominal Minimum optical receiver power: -37 dBm nominal Fiber type: Single Mode fiber [9/125 um] Network management CID interface: VT-100/RS-232C EOC channel: 512Kbps 10/100Mbps LAN: SNMP and Telnet Order wire (option) 64Kbps PCM coded voice channel can serve as a hotline or extension to PSTN for craft person communication Yoda Communications, Inc. www.yoda.com.tw 2F, No. 3-1, Industry East Road IX, Science Based Industrial Park, HsinChu, Taiwan Tel:+886-3-563-2323 Fax:+886-3-563-6420 FXO or FXS Selection is field programmable. Power DC power module: -36 ~ -56V input AC power module: 90-260Vac @50-60Hz Power can be fully redundant by two power modules Alarm I/0 Visible and audible dry relay contact outputs for MAJ and MIN Alarms user defined I/0 Two dry contact or AC/DC 0~60 Vrms inputs (on: 5~60V;off:0~3V) Two form C dry relay contact outputs Auxiliary data channel 1.2Kbps~38.4Kbps RS-232C Mechanic dimension Desktop with 19 inches mounting accessories W x H x D: 44.1 cm x 8.9 cm x 29.6 cm Ordering Information: YG1600F-i1-i2-i3-i4-i5-i6-i7-i8 i1: Specify the fiber link. 1F Single fiber link 2F Two fiber links for 1+1 protection i2: Specify optical wavelength. 13 1330 nm 15 1550 nm i3: Specify optical connectors. S SC Duple P PC/FC i4~i7 Specify user DTE Interface Cards ED ER D L 4D 4E1interface card, BNC(75Ω)+DB-25(120 ohm) connectors 4E1 interface card, BNC(75Ω)+RJ-45(120 ohm) connectors Data port+4E1 interface card, MR34+RJ-45(120 ohm)connectors Data port+4E1 interface card,MR34+BNC(75 ohm)connectors Data port+4E1 interface card,MR34+3E1BNC(75 ohm)+E1(BNC or RJ-45)connectors 2D LAN+4E1 interface card, RJ-45 +BNC(75ohm)connectors i8: X No specific Interface Cards ordered. Note: Ordering for Interface Cards i4~i7 can be specified in any sequence manner. Specify power source. D One DC power A One AC power AD DC+AC power redundancy DD DC+DC power redundancy AA AC+AC power redundancy Yoda Communications, Inc. www.yoda.com.tw 2F, No. 3-1, Industry East Road IX, Science Based Industrial Park, HsinChu, Taiwan Tel:+886-3-563-2323 Fax:+886-3-563-6420 For instance, YG1600F-2F-13-S-ER-ER-DB-L-AD means the unit is equipped with dual fiber module, for 1330nm operating wavelength with SC duplex connector, having two 4E1, Data port+4E1, and LAN+4E1 interface cards for user application and powered by AC+DC redundancy sources. Application The YG1600F transports up to 16E1 signals from the near end to the remote peer via a single mode fiber pair (transmit/receive) that has an optical budget up to 30 dB. YG1600F offers diversity of interface sub-cards enabling transport of E1, V.35 serial data and IP traffic simultaneously over the point to point fiber link. Using all of the 16E1 bandwidth, TDM services traverse across the SDH/PDH network to the remote office as illustrated below in the Figure A.1. 512K bps EOC YG1600F Fiber YG1600F 16E1 16E1 YG1600F YG1600F 16E1 16E1 SDH FXS FXS 512K bps EOC Figure A.1: 16 E1 Application with Order Wire in Hot Line Mode Yoda Communications, Inc. www.yoda.com.tw 2F, No. 3-1, Industry East Road IX, Science Based Industrial Park, HsinChu, Taiwan Tel:+886-3-563-2323 Fax:+886-3-563-6420 Illustrated in Figure A.2. one V.35 interface sub-card, one LAN sub-card and two E1x4 sub-cards transport the traffic via the SDH/PDH network to the remote office. 512K bps EOC YG1600F Fiber YG1600F 8E1 16E1 V.35 16E1 YG1600F YG1600F 8E1 SDH V.35 LAN LAN FXO FXS 512K bps EOC PBX PDH/SDH Network GSM Base Station Figure A.2: E1/V.35/LAN Application with Order Wire in Extension Mode Yoda Communications, Inc. www.yoda.com.tw 2F, No. 3-1, Industry East Road IX, Science Based Industrial Park, HsinChu, Taiwan Tel:+886-3-563-2323 Fax:+886-3-563-6420