Transcript
FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY
OFPM Multiservice PDH Multiplexer Description: The E1 PDH Multiplexer can multiple 4 – 16 E1 and 2-ports Ethernet (10/100 Mbps line speed) signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipment is fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions (from software). At the same time, it can be managed from management software Fi-View-MP.
Features • • • • • • • • • • • •
Providing up to 16 E1 channels and 2 optional 10/100Mbps Ethernet channel Fiber port bit rate: 150 Mbps, up to 120 km distance without repeater E1 Line code: HDB3, compliant to G.703, G.823 and G.742. E1 channel support both 75 Ω & 120 Ω impedance Ethernet port support 10/100 Mbps auto-detection, Full/Half Duplex auto-negotiation Ethernet port can transimit VLAN tag Complete alarm functions Providing an RS232 asynchronous interface Supporting the local/remote E1 loop back Remote loop back provided by software and hardware Providing RS232 port for management, GUI interface Standalone,220 V AC or -48 V DC power supply optional
Typical Application:
ACT_13-06_EN 22/01/2007 is registered trademark of OPTOKON Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON Co., Ltd. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, www.optokon.com,
[email protected]
1
FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY
Specifications Optical Port Port number: Bit rate: Wavelength: Distance: Connector: E1 Port Port number: Bit rate: Impedance: Line Code: Ethernet Port Port nunber: Speed: Duplex: Frame Size: MAC address: MAC aging time: Power Supply Input voltage:
1 (1 + 1) 150 Mbps +/-50 ppm 1310 nm, 1550 nm 0 – 120 km SC/PC 4, 8, 16 2.048 Mbps (+/-100 ppm) 75 Ω and 120 Ω HDB3, compliance with ITU-T G.703 1, 2, (optional) 10/100 Mbps line speed Half/Full auto-negotiate 64 - 1536 bytes 1k 5 mins When -48V, -40V to -60V (DC) is allowed When ~220V, 175V to 264 V (AC) is allowed 5W
Overall power : Operating Environment Temperature: Humidity: Size Weight
0 °C to +45 °C 95%, non condense 483 mm(L) x 44.45 mm(H) x 200 mm(D) 2 kg
Ordering Code: OFPM - XE1 -XF E1 number Ethernet 100Base 4 N/A 8 1 1 x FE 16 2 2 x FE
*)
– XX FO interface*
- XX Distance
– XX Power
– (D)(A) Optical protection
M30 S31 S55 W31 W55
02 2 km 30 30 km 50 50 km
DC -48 V AC 220 V
D with 1+1 optical protection A – ALS**
MM, 1300 nm SM, 1310 nm SM, 1550 nm WDM, 1310 TX WDM, 1550 TX
20 20 km
Fiber optic interface – SC connector, LC type on demand S31 – standard distance 30 km S55 – distance up to 120 km WDM – distance up to 50 km
**) ALS: Automatic Laser Shutdown/Reduction Typical configuration: OFPM–8E1–1F–S31-30–DC OFPM–8E1–S55–50-AC–DA
8 x E1 + 100Base Ethernet, SM 1310 nm , 30 km 8 x E1, SM 1550 nm, 50 km, with redundant pair of fibers, ALS
ACT_13-06_EN 22/01/2007 is registered trademark of OPTOKON Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON Co., Ltd. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, www.optokon.com,
[email protected]
2
