Transcript
OLAPLEX LOVE COLOUR u
®
LOVE THE SCIENCE
GUIDELINES FOR NEW USERS
OLAPLEX HAS BEEN USED THOUSANDS OF TIMES WITH AMAZING RESULTS.
“OLAPLEX SCIENCE helps take your colouring & treatments to another level.”
“OLAPLEX helps to repair broken disulphide bonds.” FOLLOW THE RULES: “Olaplex is a product of science, the stated amounts are important. USING LESS OR MORE COULD AFFECT YOUR DESIRED RESULT.”
OLAPLEX SPECIAL BOND MULTIPLYING PROFESSIONAL TREATMENT
Guidelines for the Olaplex Bond Strengthening Stand Alone Professional Treatment Service (The Treatment):
This is our most popular service and a great introduction to the Olaplex System.
For hair that has been compromised chemically or thermally damaged, The Treatment should be your first achievement. The Olaplex Bond Multiplying System can be used as a kind of ‘reset button’ for your client’s hair. The Treatment helps you to rebuild the strength, structure and integrity of damaged hair to the point where a colour or chemical service would, once again, be feasible. The Treatment should be done before and/or after a chemical service by a Professional Stylist. The Treatment is for all hair types, from virgin to damaged or chemically treated hair. When doing multiple hair lightening sessions, this service is recommended after every hair lightening process.
STEP 1
Mix 15ml (1/2oz) (3 teaspoons) of Olaplex No1 with 90ml (3oz) of water in a non-spraying applicator bottle (Do Not use a spray bottle). Apply from roots to ends on dry or damp towel dried hair. (If the client has product build up, you may want to shampoo and towel dry thoroughly first). Saturate hair with The Treatment and leave on for 5 or more minutes.
STEP 2
Without rinsing out Step 1, apply 5ml (1 teaspoon) of Olaplex No2 to short to medium hair. For longer hair apply 10ml (2 teaspoons) of Olaplex No2. Comb through once. Leave on for a minimum of 10 minutes; longer for damaged hair.
STEP 3
Rinse, shampoo, and apply your in-salon conditioner or treatment as required.
OLAPLEX WITH BLEACH (FOILS OR MECHE)
Olaplex Helps To: Protect & Preserve the Integrity of Hair.
Best Practice: Olaplex works well with bleach, but you still need to check the integrity of the hair. Good judgement is still required.
IMPORTANT: IF YOU WOULD NOT APPLY BLEACH WITHOUT OLAPLEX DO NOT APPLY BLEACH WITH OLAPLEX. Whenever you use Olaplex No1, you always need to use Olaplex No2: except when perming. For use with perms, keratin treatments and relaxers, visit: www.olaplex.co.uk/faq/. It is normal for processing time to take longer with bleach, be patient; it’s well worth the wait.
IMPORTANT: YOU WILL NEED TO INCREASE THE DEVELOPER ONE FULL VOLUME AS THE OLAPLEX LIQUID WILL DILUTE YOUR BLEACH. EXAMPLE: 20VOL. TO 30; 30VOL. TO 40.
NOTE: The amount of Olaplex used depends on the quantity of bleach being used, not the amount of both developer and bleach combined.
STEP 1
Mix bleach and developer thoroughly before adding Olaplex No1. Mix 7.5ml (1/4oz) of Olaplex No1 if using 30g (1oz) or more of bleach. You can add more bleach powder after mixing to thicken your consistency if required. If using under 30g (1oz) of bleach, mix 3.75ml (1/8oz) of Olaplex No1 into your bleach.
IMPORTANT: DO NOT ADD ANY MORE OLAPLEX No1 AS IT WILL DILUTE YOUR BLEACH AND COMPROMISE THE RESULT. WHAT NEXT: Once your bleach has developed to your desired level of colour, DO NOT SHAMPOO. STEP 2 Thoroughly rinse the hair to remove all traces of bleach and towel dry.
STEP 3
Apply 5ml (1 teaspoon) of Olaplex No2 to short to medium hair. For longer hair, apply 10ml (2 teaspoons) of Olaplex No2. Comb through once. Leave on for a minimum of 10 minutes; longer for damaged hair.
STEP 4 If you are NOT applying a TONER, rinse, shampoo, and apply any in-salon conditioner or treatment as required. If you are applying a TONER please continue to the section ‘OLAPLEX WITH TONERS’.
OLAPLEX WITH TONERS
You do not need to add Olaplex No1 to your TONER if applied for less than 10 minutes as it will not be effective. STEP 1 Mix 3.75ml (1/8oz) of Olaplex No1 into your TONER.
STEP 2
Rinse hair thoroughly to remove all traces of TONER and towel dry.
STEP 3
STEP 4
Apply 5ml (1 teaspoon) of Olaplex No2 to short to medium hair and, for longer hair, apply 10ml (2 teaspoons) of Olaplex No2. Comb through once. Leave for 10 minutes, longer for damaged hair.
STEP 5
Rinse, shampoo, and apply your in-salon conditioner or treatment as required.
OLAPLEX WITH COLOUR
Olaplex Helps To: Repair Broken Disulphide Bonds, Provide Richer Looking Colour & Helps the Colour Last Longer.
STEP 1
Mix your colour and developer thoroughly before adding Olaplex No1. If using 50/60ml* or more of base colour, gloss and toners** add 3.75ml of Olaplex No1. If using under 50/60ml* of base colour, gloss and toners** add 1.875ml of Olaplex No1. *Option of 50/60ml given for ease of use with tube size variation. **You do not need to add Olaplex No1 to your toner if applied for less than 10 minutes as it will not be effective.
IMPORTANT: YOU DO NOT NEED TO INCREASE YOUR DEVELOPER LEVEL WHEN USING OLAPLEX WITH COLOUR. NOTE: Once your colour has developed, DO NOT SHAMPOO.
STEP 2
Thoroughly rinse the hair to remove all traces of colour and towel dry.
STEP 3
Apply 5ml (1 teaspoon) of Olaplex No2 to short to medium hair. For longer hair, apply 10ml (2 teaspoons) of Olaplex No2. Comb through once. Leave on for a minimum of 10 minutes; longer for damaged hair.
STEP 4
Rinse, shampoo, and apply your in-salon conditioner or treatment as required.
OLAPLEX WITH BALAYAGE Olaplex Helps To: Protect & Preserve the Integrity of Hair
STEP 1
Mix bleach and developer thoroughly before adding Olaplex No1. You need to increase your developer one full volume as the Olaplex liquid will dilute your bleach. Example: 20vol. to 30; 30vol. to 40.
STEP 2
Mix 3.75ml (1/8oz) of Olaplex No1 if using 30g (1oz) or more of bleach. If using under 30g (1oz) of bleach, mix 1.875ml (1/16oz) of Olaplex No1 into your bleach. NOTE: You may add more bleach powder after mixing to thicken your consistency if required. IMPORTANT: DO NOT ADD ANY MORE OLAPLEX No1 AS IT WILL DILUTE YOUR BLEACH AND COMPROMISE THE RESULT. NOTE: Once your bleached hair has developed, DO NOT SHAMPOO.
STEP 3
Thoroughly rinse the hair to remove all traces of bleach and towel dry.
STEP 4
Apply 5ml (1 teaspoon) of Olaplex No2 to short to medium hair. For longer hair apply 10ml (2 teaspoons) of Olaplex No2. Comb through once. Leave on for a minimum of 10 minutes, longer for damaged hair.
STEP 5
Rinse, shampoo, and apply any in-salon conditioner or treatment as required.
OLAPLEX WITH ON SCALP BLEACH
Olaplex Helps To: Protect & Preserve the Integrity of Hair.
Best Practice: Olaplex works well with bleach, but you still need to check the integrity of the hair. Good judgement is still required.
IMPORTANT: IF YOU WOULD NOT APPLY BLEACH WITHOUT OLAPLEX, DO NOT APPLY BLEACH WITH OLAPLEX.
Whenever you use Olaplex No1, you always need to use Olaplex No2: except when perming. For use with perms, keratin treatments and relaxers, visit: www.olaplex.co.uk/faq/.
IMPORTANT: WE DO NOT RECOMMEND USING MORE THAN 20VOL / 6% DEVELOPER ON THE SCALP.
It is normal for processing time to take longer with bleach; be patient it’s worth the wait.
NOTE: The amount of Olaplex used depends on the quantity of bleach being used, not the amount of both developer and bleach combined.
STEP 1
Mix bleach and developer thoroughly before adding Olaplex No1.
STEP 2
Mix 7.5ml (1/4oz) of Olaplex No1 if using 30g (1oz) or more of bleach. You can add more bleach powder after mixing to thicken your consistency if required. If using under 30g (1oz) of bleach, mix 3.75ml (1/8oz) of Olaplex No1.
IMPORTANT: DO NOT ADD ANY MORE OLAPLEX No1 AS IT WILL DILUTE YOUR BLEACH AND COMPROMISE THE RESULT.
NOTE: Once your bleach has developed to your desired level of colour, DO NOT SHAMPOO.
STEP 3 Thoroughly rinse the hair to remove all traces of bleach and towel dry.
STEP 4
Apply 5ml (1 teaspoon) of Olaplex No2 to short to medium hair. For longer hair apply 10ml (2 teaspoons) of Olaplex No2. Comb through once. Leave on for a minimum of 10 minutes; longer for damaged hair.
STEP 5
If you are NOT applying a TONER, rinse, shampoo, and apply any in-salon conditioner or treatment as required. If you are applying a TONER please refer to ‘OLAPLEX WITH TONERS’ on page 3.
OLAPLEX WITH CREAM BLEACH (FOILS OR MECHE)
STEP 1 Mix cream bleach and developer thoroughly before adding Olaplex No1.
STEP 2 Mix 3.75ml (1/8oz) of Olaplex No1 if using less than 45g (1.5oz) of cream bleach. For 45-75g (1.5 - 2.5oz) of cream bleach add 7.5ml (1/4oz) of Olaplex No1. If using more than 75g (2.5oz) of cream bleach, mix a fresh bowl of your desired cream bleach amount with Olaplex No1 to maintain consistent mixing ratios. Continue with steps 3-5 above.
NOTE: For Balayage or on-scalp applications use 1.875ml (1/16oz) of Olaplex No1 for less than 45g (1.5oz) of cream bleach. Use 3.75ml (1/8oz) of Olaplex No1 for amounts between 45-75g (1.5-2.5oz) of cream bleach.
OLAPLEX No. 3 - TAKE HOME
WHAT IS OLAPLEX No3 HAIR PERFECTOR?
Olaplex No3 is your client’s home-use part of the Olaplex System and contains the same active ingredient as both the Olaplex No1 and Olaplex No2. Olaplex No3 helps the client to keep up the good work at home. Olaplex No3 helps to repair and maintain strong, healthy-looking hair in between salon visits as it continues to help repair the broken disulphide bonds in the hair.
STEP 1
Before shampooing, apply 5ml (1 teaspoon) for short hair or 10ml (two teaspoons) for longer hair, of Olaplex No3 to wet or towel-dried hair.
STEP 2
Comb through. Leave on for a minimum of 10 minutes; longer for damaged hair. We recommend a minimum of 10 minutes, and, for damaged hair, a maximum of 12 hours (overnight).
STEP 3
Rinse and use your professionally recommended shampoo and conditioner.
NOTE: We recommend Olaplex No3 be used once a week or as recommended by your professional stylist.
