Omr-p, Microset Infrared Recessed Mount

Transcript

Type Catalog # Project Comments Date Prepared by OMR-P, MicroSet Infrared Recessed Mount PIR Activated MicroSet • No adjustments necessary at installation • Continuous, real-time, self-adjusting sensitivity and time delay Adjustable ambient light level feature Segmented Fresnel lens provides optimum sensitivity and performance Open collector output to switch up to 10 switchpacks • DIP Switch override allows time delay to be locked at 30 minutes • Manual ON/OFF feature when wired to normally open momentary pushbutton • DIP Switch selectable feature prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems • NEMA WD7 Standard robotic method utilized to verify coverage patterns Specifications: Technology: Passive Infrared (PIR) Power Requirements: 10-30 VDC from Greengate Switchpack or Greengate system. Maximum current needed is 25mA per sensor Output: • Open collector output to switch up to ten Greengate Switchpacks. • Isolated Form C Relay in (-R) models. • Isolated Form C Relay Ratings: 1A 30 VDC/VAC Time Delays: Self adjustable from 10 min. to 30 min. Ambient Light Features: Adjustable from 10 to 300 Foot Candles Operating Environment: • Temperature: 60°F - 80°F (15°C - 26°C) • Relative humidity: Less than 95%, non-condensing • For indoor use only Housing: Medium impact injection molded housing. ABS resin complies with UL94V0. Paintable off-white. Size: 3” diameter, 1.43” deep LED lamp: Red LED Warranty: Five year Lighting Sweep When sensors are used in conjunction with computer lighting sweep systems, you MUST enable the Lighting Sweep feature by turning DIP Switch 2 ON. Enabling this feature prevents an unnecessary “lights ON” following the computer power-on sweep. Overview The MicroSet Passive Infrared ceiling sensors can be used individually or in combination to provide lighting control and integration with HVAC control throughout a building. The MicroSet technology contained within the line of MicroSet Passive Infrared ceiling sensors continuously self-adjusts sensitivity and time delay automatically and immediately in response to occupant behavior. There is no need for time consuming manual adjustments or to “learn” behavior patterns over extensive periods of time. Operation The sensor uses PIR technology to monitor a room for occupancy. Its segmented Fresnel lens divides the field of view into detector zones, and detects the changes in temperature that are created when a person, or part of a person as small as a hand, passes into or out of a detector zone. The lights will remain ON as long as the sensor detects movement through the detector zones. When no motion is detected, lights are switched OFF following a preset time delay. The MicroSet Passive Infrared ceiling sensor has an ambient light level sensor. Using the DIP Switches located on the back of the unit, the user can select the ambient light level above which artificial light is not required. If ambient light is above this level when motion is detected, the sensor will keep the lights OFF until the ambient light falls below this level. If this level is reached while the lights are ON, the sensor will switch the lights OFF. Applications offices storage areas hallways (refer to coverage pattern) conference rooms common areas other indoor office spaces Ordering Mounting Features OMR-P-0450-R 450 sq.ft. Recessed w/BAS Relay & Daylight Sensor OMR-P-1200-R 1200 sq.ft. Recessed w/BAS Relay & Daylight Sensor Catalog # Recommended Room Size UL Listed www.coopercontrol.com 203 Cooper Circle Peachtree City, GA 30269 P: 800-553-3879 F: 800-954-7016 Occupancy Sensors - Ceiling Mount • Recessed flush mounted unit offers greater architectural aesthetic appeal OMR-P, MicroSet Infrared Recessed Mount Wiring Diagrams (Use GMDS Switch Only in Single Sensor Applications) Coverage OMR-P-0450-R OMR-P-1200-R Maximum Mounting Height- 12ft. Maximum Mounting Height- 12ft. Mounting www.coopercontrol.com 203 Cooper Circle, Peachtree City, GA 30269 P: 800-553-3879 F: 800-954-7016 ACC120036 Cooper Controls, Greengate, Novitas, Yes Box, PCI Lighting Control Systems, VisionTouch, VisionSwitch, MicroSet, Digita, ControlKeeper, LiteKeeper, TracKeeper, IntelliRelay are valuable trademarks of Cooper Industries in the U.S and other countries. You are not permitted to use Cooper Trademarks without the prior written consent of Cooper Industries.