Transcript
OP+AVT+2 2 Analog Video, 8 Analog Audio Channel Optical Transmitter
The OP+AVT modules provide professional, broadcast-quality transport of multiple analog audio and video signals over a single fiber optic interface. These modules are capable of transporting up to eight analog video channels and 64 analog audio channels over this fiber interface, using an innovative daisy-chain design to maximize the fiber optic bandwidth. Occupying two slots within the 6800+™ frame, this solution allows for up to 20 independent analog video signals and 80 analog audio channels in a single 2RU frame. OP+AVT+2 modules support up to two video and eight audio channels. As well, an electrical-only expansion version of the OP+AVT+2 (OP+AVT+EXP) can be used along with an initial optical version to create a daisychained configuration capable of supporting up to eight video and 64 audio channels on a single optical channel. Fiber optic transmitters are available in 1310 nm (FP laser). These modules can be controlled manually via card-edge controls or remotely using either CCS Navigator™, third-party SNMP-based control applications, or HTTP Web browser (with QXFE-series frames only).
Features One fiber output: either single- or multimode Available in 1310 nm FP Up to two composite video inputs (NTSC, PAL-B, PAL-M) Up to eight balanced analog audio inputs (high impedance or 600 ohms) Electrical-only expansion module allows for daisy-chaining of up to eight transmit modules Hot-swappable Occupies two slots in the 2RU FR6802+QXFE 6800+ frame or the standalone FR6800+MB 6800+ Mix Box HTTP control via Ethernet-equipped 6800+ 2RU frames Optional CCS Navigator applications for remote Ethernet PC-based status monitoring and control Standard SC/PC-type fiber optic connector
Specifications Specifications and designs are subject to change without notice
1 866 4 IMAGINE http://www.imaginecommunications.com/products/networking-infrastructure/processing/selenio-6800/selenio-6800-fiber-transport/opavt2 © Imagine Communications Proprietary and Confidential
OP+AVT+2 Page 1 of 4
OPTICAL OUTPUT Number of Outputs
1
Wavelengths (nm)
1310 FP
Connector
SC/PC per IEC 61754-4-1
Output Power
-7 dBm ±1 dBm FP
Extinction Ratio
8 dB typical
ANALOG COMPOSITE VIDEO INPUTS Number of Inputs
2 (75 ohms terminated)
Connector
BNC (IEC 169-8)
Standards
NTSC (SMPTE 170M), PAL-B (ITU 624-2), PAL-M
Level
1 V pk-pk; ±6 dB nominal
Impedance
75 ohms
Return Loss
40 dB to 6 MHz
Common Mode Range
5 V pk-pk
Common Mode Rejection Ratio
60 dB at 60 Hz
ANALOG AUDIO INPUTS Number of Inputs
8 mono channels
Connector
Weidmüller 24-pin locking header-socket pair
Input Audio Level
28 to 16 dBu (adjustable in 2 dB increments)
Input Impedance
High-impedance or 600 ohms, jumper selectable
CMRR
80 dB at 60 Hz, typical
Linearity
<±0.5 dB (to -100 dBFS)
Frequency Response
<±0.05 dB (20 Hz to 20 kHz), typical
THD
100 dB (at -1 dBFS, 20 Hz to 20 kHz)
SNR
100 dB
POWER AND TEMPERATURE Operating Temperature
41° to 113° F (5° to 45° C)
Power Consumption
<10 W
Start Up Time
<5 sec
Ordering Information OP+AVT+2+13D
2 video, 8 audio, 1310 nm FP laser
OP+AVT+2+EXP
2 video, 8 audio, AVT expansion (no optics)
1 866 4 IMAGINE http://www.imaginecommunications.com/products/networking-infrastructure/processing/selenio-6800/selenio-6800-fiber-transport/opavt2 © Imagine Communications Proprietary and Confidential
OP+AVT+2 Page 2 of 4
Images/Diagrams Selenio 6800+™
Block Diagram
Back Module
1 866 4 IMAGINE http://www.imaginecommunications.com/products/networking-infrastructure/processing/selenio-6800/selenio-6800-fiber-transport/opavt2 © Imagine Communications Proprietary and Confidential
OP+AVT+2 Page 3 of 4
1 866 4 IMAGINE http://www.imaginecommunications.com/products/networking-infrastructure/processing/selenio-6800/selenio-6800-fiber-transport/opavt2 © Imagine Communications Proprietary and Confidential
OP+AVT+2 Page 4 of 4
