Preview only show first 10 pages with watermark. For full document please download

Opendevice - Events Guide

Rating
Date

November 2018
Size

1.5MB
Views

10,115
Categories

Home Home security & automation Security access control systems

Transcript

OpenDevice Events Guide Copyright 2012 Lenel Systems International, Inc. May 21, 2012 1 Table of Contents Open Device Events ...................................................................................................................... 3 Granted Access Events ................................................................................................................. 8 Denied Events .............................................................................................................................. 12 Emergency Events ....................................................................................................................... 22 Area Control Events ................................................................................................................... 24 System Events .............................................................................................................................. 27 Elevator Events ........................................................................................................................... 72 Asset Events ................................................................................................................................. 75 Fire Events ................................................................................................................................... 78 Intercom Events .......................................................................................................................... 91 Video Events ................................................................................................................................ 98 Transmitter Events ................................................................................................................... 111 Biometric Events ....................................................................................................................... 121 Muster Events............................................................................................................................ 122 Generic Events .......................................................................................................................... 123 Point Of Sale Events ................................................................................................................. 125 Status Messages ......................................................................................................................... 138 Index ........................................................................................................................................... 139 Copyright 2012 Lenel Systems International, Inc. May 21, 2012 2 Open Device Events Open Device Events Revision History Date Author Notes 10/10/2007 R. Cortese • Added missing Category 0 events up through the 6.0.xxx release 03/27/2003 M. Serafin • Added a section with some examples. 03/25/2003 M. Serafin • Added additional events that have been added for the 5.10.3xx releases (these are located in the Denied, System, Intercom, Video, and Generic event types). 12/10/2002 M. Serafin • Added note indicating that a copy of the LNLMESSAGE structure was created for backwards compatibility. • The following events have been added: L_SYSTEM_MAX_BIO_TEMPLATES_REA CHED, L_SYSTEM_ACKNOWLEDGMENT_ACTI ON_EXECUTED, L_SYSTEM_ACKNOWLEDGMENT_ACTI ON_FAILED Overview The Lenel Communication Server receives messages from various Device Translators that are then passed on to programs like Alarm Monitoring and also saves the messages to the database. The majority of these messages represent events that have occurred on a hardware device. Since the various hardware devices return these events differently, there needs to be a common method so that the Lenel Communication Server doesn’t need to care which hardware device sent the message. The Device Translator for the hardware would be the one responsible for translating the device specific event message into the generic event message that the Lenel Communication server and other applications understand. This section of the document goes into a little more detail explaining each individual event. Each event will be based on two IDs. The first ID is the sb_EventType and the second ID is the sb_EventID which is unique for the sb_EventType. These events are stored in the database based on the sb_EventType and sb_EventID. Besides the number for the event, an event will also be given a name and also a description. The description will explain things like how and when this event can be generated. The current list of available sb_EventTypes are listed below: sb_EventTypes: 0 – Access Granted 1 – Access Denied 2 – Emergency Copyright 2013 Lenel Systems International, Inc. 3 3 – Area Control 4 – System 5 – Asset 6 – Host Message (Lenel Communication Sever internal use) 7 – Fire 8 – Fire (not currently being used) 9 – Fire (not currently being used) 10 – Intercom 11 – Video 12 – Transmitter 13-17 – Reserved 18 – Biometric 19 – Trouble 20 – Digitize 21 – Burglary 22 – Temperature 23 – Gas 24 – Relay Sounder 25 – Medical 26 – Water 27 – C900 28 – Open/Close 29 – Mustering 30 – Generic 31 – Point of Sale Also associated with each event is a unique ID which is currently only being used on a very limited basis and is not used when passing back events from the hardware. Some events will have information about an Event Pair, this includes the Pair Type (Initiating or Restoring) and ID of the event it is paired with. These are used for events that actually occur in pair with another event. One example is Door Forced Open and Door Forced Open Cancelled. The Door Forced Open is an Initiating event and the Door Forced Open Cancelled is a Restoring event, so these would be the Pair Types. The Event Pair for the Door Forced Open would be the number of the Door Forced Open Cancelled and vice versa for the Door Forced Open Cancelled event. When an event is received from the hardware by a Device Translator, the Device Translator needs to translate the event and fill out the LNLMESSAGE structure to be passed on to the Lenel Communication Server. Certain events will also need to pass back additional information like what the input number was for an input that was activated or any other additional information that is required. The LNLMESSAGE structure is explained in more detail in the IDistributeEvent documentation. The events listed below will list the fields that should be filled in for each event. Copyright 2013 Lenel Systems International, Inc. 4 Note: For releases after the 5.10.2xx release, the existing LNLMESSAGE was renamed OLDLNLMESSAGE for backwards compatibility. There are a few fields of the LNLMESSAGE structure that should always be filled in. These are described below and are the same for all of the events so they have not been repeated for every event. sl_Size sb_MessageType sl_SerialNumber sl_Time Size of this structure. This variable can be set using a statement like: sizeof(LNLMESSAGE). Type of message: 0 - LNLMSG_TYPE_EVENT 1 - LNLMSG_TYPE_STATUS 2 - LNLMSG_TYPE_VIDEOEVENT 3 – Reserved for Lenel Communication Server internal use. All the events listed below in this document are of type LNLMSG_TYPE_EVENT unless otherwise noted. Serial number of the event. The Serial Number along with the Panel ID is used to create a unique index in the database for the events. When using the base Device Translator template the following method can be used to return the serial number: GetPanelEventSerialNumber(). Time of the event. This time is represented in UTC time (also known as GMT time). Some devices may not have a concept of time so the Device Translator is responsible of assigning a time to the event. One method located in that can be used is: g_oTimeConverter.GetCurrentGmtTime(). When possible the time should be grabbed from the device. Examples The following examples will show a few different ways of using the LNLMESSAGE for passing back event messages and status messages. The WriteEventsToClients method (located in DeviceTranslator.h) can be used for sending these events on to the Communication Server. See the documentation on the IDistributeEvent interface for more information. Below is an example of sending a Communication Restored event: LNLMESSAGE ls_Event; memset( &ls_Event, '\0', sizeof(ls_Event)); Copyright 2013 Lenel Systems International, Inc. 5 ls_Event.sl_Size = sizeof(LNLMESSAGE); ls_Event.sl_SerialNumber = GetPanelEventSerialNumber(); ls_Event.sl_Time = g_oTimeConverter.GetCurrentGmtTime(); //time(NULL); ls_Event.ss_AccessPanelID = m_PanelID; ls_Event.sb_EventType = L_EVENTTYPE_SYSTEM; ls_Event.sb_EventID = L_SYSTEM_COMM_RESTORED; WriteEventsToClients (&ls_Event); The first thing that is done is initialize the LNLMESSAGE structure to all zeroes, this is the default. The size of the structure should also be set, validation is done in the Communication Server so that it can determine that it is receiving a valid message. The serial number also needs to be set and this is done by calling GetPanelEventSerialNumber. The serial number along with the panel ID is a unique ID that is associated to the event and is used when saving the event to the database and also by clients that receive the event. The time also needs to be set to UTC. In the example above a method is used to grab the current UTC time from the local machine. If the device has its own internal clock and can store events you will want to use the time from the device and not the local machine. Next the device ID is set, for this event we are generating it for the panel so only the Panel ID is set. If it is for a downstream device the sb_DeviceID and sb_InputDevID variables could also be set to reflect this. The event to use will also need to be set as well, and this consists of the event type (sb_EventType) and the event ID (sb_EventID). This is the basic information that needs to be filled in. Here is another example that sends an intercom event indicating that a call has been placed to an open subscriber. LNLMESSAGE ls_Event; memset( &ls_Event, '\0', sizeof(ls_Event)); ls_Event.sl_Size = sizeof(LNLMESSAGE); ls_Event.sl_SerialNumber = GetPanelEventSerialNumber(); ls_Event.sl_Time = g_oTimeConverter.GetCurrentGmtTime(); ls_Event.ss_AccessPanelID = m_PanelID; ls_Event.sb_DeviceID = station1; ls_Event.sb_EventType = L_EVENTTYPE_INTERCOM; ls_Event.sb_EventID = L_INTERCOM_CALL_TO_OPEN; ls_Event.sb_EventDataType = EVENT_DATA_TYPE_INTERCOM; ls_Event.su_EventData.us_IntercomData.sl_IntercomData = station2; WriteEventsToClients (&ls_Event); In this example it is pretty similar to the first example with a few differences. The first difference is that this is an event for a downstream device (an intercom station off of an intercom exchange) and it actually is using the event data union to pass back additional data with this event. You will see that it sets sb_EventDataType to EVENT_DATA_TYPE_INTERCOM to Copyright 2013 Lenel Systems International, Inc. 6 indicate that the intercom data structure is being used, and it then sets sl_IntercomData in this structure to station2, which is the intercom station that the first intercom station (station1) called. The next example below shows an example of how to send an LNLMESSAGE for status. Status messages are not saved to the database and do not display as an event in Alarm Monitoring. They are handled behind the scenes to update the status in Alarm Monitoring. The example below is used to indicate the free_memory available in the panel: LNLMESSAGE ls_Event; memset( &ls_Event, '\0', sizeof(ls_Event)); ls_Event.sl_Size = sizeof(LNLMESSAGE); ls_Event.sl_Time = g_oTimeConverter.GetCurrentGmtTime(); ls_Event.sl_SerialNumber = GetPanelEventSerialNumber(); ls_Event.ss_AccessPanelID = m_PanelID; ls_Event.sb_MessageType = LNLMSG_TYPE_STATUS; ls_Event.sb_EventDataType = EVENT_DATA_TYPE_STATUSREQUEST; ls_Event.su_EventData.us_StatusRequest.sl_StatusType = DATA_SRQ_PANEL_MEM_FREE; ls_Event.su_EventData.us_StatusRequest.sl_Status = free_memory; WriteEventsToClients ( &ls_Event ); You will notice that these messages are created in a similar fashion to a basic event. First the LNLMESSAGE is initialized to all zeroes and the size is set. Next the time and the serial number are set. These are really not required for these messages but it does not hurt to set them. The panel ID is also set. In this example you will see that the sb_MessageType is set to LNLMSG_TYPE_STATUS to indicate a status message. In the earlier examples this was not set because the default is LNLMSG_TYPE_EVENT (0). The DATA_STATUSREQUEST structure is used to pass back the details of the status so the sb_EventDataType needs to be set to EVENT_DATA_TYPE_STATUSREQUEST. Then the type of status request needs to be set and in this case we are setting sl_StatusType to DATA_SRQ_PANEL_MEM_FREE and then setting the status via sl_Status to the available free memory in the panel. There are other defines listed in lmsgtype.h that contain _SRQ_ in the define which are for the other statuses that can be sent. Copyright 2013 Lenel Systems International, Inc. 7 Granted Access Events Access Granted This event is used to indicate that the cardholder was granted access. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 1 0 (L_EVENTTYPE_GRANTED) 0 (L_GRANTED_ACCESS) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID of cardholder. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Granted On Facility Code Indicates an access granted based on facility code. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 2 0 (L_EVENTTYPE_GRANTED) 1 (L_GRANTED_FACILITYCODE) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Facility code. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Granted No Entry Made Indicates an access granted but no entry was made. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 3 0 (L_EVENTTYPE_GRANTED) 2 (L_GRANTED_NOENTRYMADE) 8 ss_AccessPanelID sb_DeviceID sb_InputArg ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID of cardholder. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Granted On Facility Code, No Entry Made This event indicates an access granted based on facility code, but no entry was made. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 4 0 (L_EVENTTYPE_GRANTED) 3 (L_GRANTED_FCNOENTRYMADE) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Facility code. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Granted: Reader Unlocked Access to the reader was granted because the reader was in the unlocked mode. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 843 0 (L_EVENTTYPE_GRANTED) 8 (L_GRANTED_READER_UNLOCKED) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) Open Door Command Issued - Door Used A command was issued to open a door contact and the door was opened. Copyright 2013 Lenel Systems International, Inc. 9 ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1938 0 (L_EVENTTYPE_GRANTED) 10 (L_GRANTED_HOST_OPEN_DOOR_USED) Panel ID Device ID (Reader) Open Door Command Issued - Door Not Used A command was issued to open a door contact and the door was not opened. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 1939 0 (L_EVENTTYPE_GRANTED) 10 (L_GRANTED_HOST_OPEN_DOOR_NOT_USED) Panel ID Device ID (Reader) 10 Copyright 2013 Lenel Systems International, Inc. 11 Denied Events Invalid Card Format This event is used to indicate an invalid card format was detected. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCNA.sl_CardNumber 6 1 (L_EVENTTYPE_DENIED) 0 (L_DENIED_INVALIDCARDFORMAT) ID of panel. ID of reader. EVENT_DATA_TYPE_CNA 0 Denied Count Exceeded Currently this event is not being used. ID sb_EventType sb_EventID ss_AccessPanelID Sb_DeviceID 7 1 (L_EVENTTYPE_DENIED) 1 (L_DENIED_DENYCOUNTEXCEEDED) Panel ID. Device ID (Reader). Copyright 2013 Lenel Systems International, Inc. 12 Denied, PIN Only Request Indicates an attempt to access a reader using only a PIN code. ID sb_EventType sb_EventID 8 1 (L_EVENTTYPE_DENIED) 2 (L_DENIED_REQUESTBYPINONLY) Invalid Facility Code Event that indicates that an invalid facility code. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 9 1 (L_EVENTTYPE_DENIED) 3 (L_DENIED_INVALIDFACILITYCODE) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_FC su_EventData.us_DataFC.sl_FacilityCode Invalid facility code. su_EventData.us_DataFC.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Invalid Badge Event that indicates an invalid badge. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 10 1 (L_EVENTTYPE_DENIED) 4 (L_DENIED_INVALIDBADGE) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Invalid badge number. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Copyright 2013 Lenel Systems International, Inc. 13 Invalid Issue Code Event that indicates an invalid issue code. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 11 1 (L_EVENTTYPE_DENIED) 5 (L_DENIED_INVALIDISSUECODE) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Invalid PIN Number Event that indicates an invalid PIN number was used. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 12 1 (L_EVENTTYPE_DENIED) 6 (L_DENIED_INVALIDPIN) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Invalid Access Level Event that indicates that the cardholder doesn’t have the proper access level. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg Copyright 2013 Lenel Systems International, Inc. 13 1 (L_EVENTTYPE_DENIED) 7 (L_DENIED_INVALIDACCESSLEVEL) ID of panel. ID of reader. Used to indicate the elevator floor number when 14 event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge number. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Inactive Badge Event that indicates that the badge is inactive. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 14 1 (L_EVENTTYPE_DENIED) 8 (L_DENIED_INACTIVEBADGE) ID of panel. ID of reader. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge number. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Denied, Reader Excluded Generated when access was denied because the reader exclusion list was violated. This happens when using precision access exclusion and the cardholder has access to the reader via an access level, but the precision access exclusion list has removed access. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 15 1 (L_EVENTTYPE_DENIED) 9 (L_DENIED_READEREXCLUDED) Panel ID. Reader ID. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Copyright 2013 Lenel Systems International, Inc. 15 Denied, No Command Authority Event indicating that the deny was because of no command authority. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 16 1 (L_EVENTTYPE_DENIED) 10 (L_DENIED_CMDAUTHORITY) Panel ID. Reader ID. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Denied UnMask – Active Zones in Group Event indicating that the unmasking was denied because there were active zones in the group. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputArg 17 1 (L_EVENTTYPE_DENIED) 11 (L_DENIED_DENIEDMASK) Panel ID. Reader ID. Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Use Limit Exceeded Event that indicates that a badge was denied because the use limit was exceeded. ID sb_EventType sb_EventID sb_InputArg Copyright 2013 Lenel Systems International, Inc. 18 1 (L_EVENTTYPE_DENIED) 12 (L_DENIED_USELIMITEXCEEDED) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). 16 sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge number. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Denied Low Battery When the main battery level in the hardware (reader) begins to fall lower than the "alarm zone", there will not be sufficient power to perform token validation. The reader will therefore deny access to the token presented and this event is generated. This event serves to force the operator to change the battery, before it is too late. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 801 1 (L_EVENTTYPE_DENIED) 15 (L_DENIED_LOW_BATTERY) Panel ID. Device ID. EVENT_DATA_TYPE_CA Badge ID. Issue code of the badge (-1 indicates that the issue code is not available). Biometric Mismatch Event indicating that access to the reader was denied because of a biometric mismatch. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 812 1 (L_EVENTTYPE_DENIED) 17 (L_DENIED_BIOMETRIC_MISMATCH) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) Access Denied: Reader Locked Access to the reader was denied because the reader is in locked mode. ID sb_EventType sb_EventID ss_AccessPanelID Copyright 2013 Lenel Systems International, Inc. 844 1 (L_EVENTTYPE_DENIED) 18 (L_DENIED_READER_LOCKED) Panel ID 17 sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) Denied - No Host Approval Access to the reader was denied because no host approval was received. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 1508 1 (L_EVENTTYPE_DENIED) 26 (L_DENIED_NO_HOST_APPROVAL) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) Denied - Unauthorized Assets Access to the reader was denied because of unauthorized assets. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 1509 1 (L_EVENTTYPE_DENIED) 27 (L_DENIED_UNAUTHORIZED_ASSETS) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) Access Denied: No Biometric Template Generated when the cardholder did not have a biometric template loaded in the database, so a verification could not be done. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber Copyright 2013 Lenel Systems International, Inc. 1550 1 (L_EVENTTYPE_DENIED) 28 (L_DENIED_NO_BIO_RECORD) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number 18 su_EventData.us_DataCA.sl_IssueCode Issue Code (-1 if not used) Access Denied: Biometric Reader Offline Generated when the alternate biometric reader could not be contacted for verification (was offline ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 1551 1 (L_EVENTTYPE_DENIED) 29 (L_DENIED_NO_BIO_DEVICE) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) Smart Card Authentication Failed Generated when a smart card authentication failed ID sb_EventType sb_EventID 1789 1 (L_EVENTTYPE_DENIED) 33 (L_DENIED_SC_AUTHENTICATION_FAILED) ss_AccessPanelID Panel ID sb_DeviceID Device ID (Reader) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Card Number su_EventData.us_DataCA.sl_IssueCode Issue Code Access Denied: Escort Timeout Expired This event indicates that access was denied because a person requiring an escort attempted access but an escort did not present their credentials in the time period ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber Copyright 2013 Lenel Systems International, Inc. 1896 1 (L_EVENTTYPE_DENIED) 34 (L_DENIED_ESCORT_TIMEOUT) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number 19 Access Denied: Area Occupied An event indicating that access was denied due to the room being empty. ID sb_EventType sb_EventID 1911 1 (L_EVENTTYPE_DENIED) 36 (L_DENIED_SPC_TWOMAN_MAY_NOT_EXIT) ss_AccessPanelID Panel ID sb_DeviceID Device ID (Reader) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Card Number Access Denied: No Occupant Approval An event indicating that access was denied due to no occupant approval. ID sb_EventType sb_EventID 1912 1 (L_EVENTTYPE_DENIED) 37 (L_DENIED_SPC_TWOMAN_NO_APPROVAL) ss_AccessPanelID Panel ID sb_DeviceID Device ID (Reader) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Card Number Denied, Badge Not in Panel A badge was used at a reader but does not exist in the panel due to the Selective Cardholder Download configuration. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber 1914 1 (L_EVENTTYPE_DENIED) 38 (L_DENIED_BADGE_NOT_IN_PANEL) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA -1 Access Denied: Area Empty An event indicating that access was denied due to the room being empty. Copyright 2013 Lenel Systems International, Inc. 20 ID sb_EventType sb_EventID 1928 1 (L_EVENTTYPE_DENIED) 35 (L_DENIED_SPC_TWOMAN_AREA_EMPTY) ss_AccessPanelID Panel ID sb_DeviceID Device ID (Reader) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Card Number Access Denied: Asset Required An event indicating that access was denied since no asset was presented for the access attempt. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber 1984 1 (L_EVENTTYPE_DENIED) 39 (L_DENIED_ASSET_REQUIRED) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Access Denied This event is used to indicate that the cardholder was denied access. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode Copyright 2013 Lenel Systems International, Inc. 2289 1 (L_EVENTTYPE_DENIED) 65 (L_DENIED_ACCESS) ID of panel. ID of reader. EVENT_DATA_TYPE_CA Badge ID of cardholder. Issue code of the badge (-1 indicates that the issue code is not available). 21 Emergency Events Access Granted Under Duress Event that indicates that cardholder was granted access under duress. ID sb_EventType sb_EventID sb_InputArg 20 2 (L_EVENTTYPE_EMERGENCY) 0 (L_EMERGENCY_GRANTEDDURESS) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Denied Under Duress Event that indicates that cardholder was denied access under duress. ID sb_EventType sb_EventID sb_InputArg 21 2 (L_EVENTTYPE_EMERGENCY) 1 (L_EMERGENCY_DENIEDDURESS) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Granted Under Duress – No Entry Made Event that indicates that cardholder was granted access under duress but no entry was made. ID sb_EventType sb_EventID sb_InputArg sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 22 2 (L_EVENTTYPE_EMERGENCY) 2 (L_EMERGENCY_GRANTEDNOENTRY) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). EVENT_DATA_TYPE_CA 22 su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Copyright 2013 Lenel Systems International, Inc. 23 Area Control Events Anti-Passback Violation Event that is used to indicate an anti-passback violation. ID sb_EventType sb_EventID sb_InputArg 23 3 (L_EVENTTYPE_AREACONTROL) 0 (L_AREA_ANTIPASSBACKVIOLATION) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Area Limit Exceeded Event that indicates that an area limit has been exceeded. ID sb_EventType sb_EventID sb_InputArg 24 3 (L_EVENTTYPE_AREACONTROL) 1 (L_AREA_AREALIMITEXCEEDED) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Timeout Exceeded – No Second Card Event that indicates that a second card was not presented to the reader during the time limit when using two-man control. ID sb_EventType sb_EventID sb_InputArg Copyright 2013 Lenel Systems International, Inc. 25 3 (L_EVENTTYPE_AREACONTROL) 2 (L_AREA_TIMEOUTEXCEEDED) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). 24 sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Area Closed Event that indicates that the area is closed. ID sb_EventType sb_EventID sb_InputArg 26 3 (L_EVENTTYPE_AREACONTROL) 3 (L_AREA_AREACLOSED) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Granted - Anti-Passback Used Event that indicates an access granted using anti-passback. ID sb_EventType sb_EventID sb_InputArg 27 3 (L_EVENTTYPE_AREACONTROL) 4 (L_AREA_GRANTEDAPBUSED) Used to indicate the elevator floor number when event is generated for an elevator reader (0 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Access Granted - Anti-Passback Not Used Event that indicates an access granted not using anti-passback. ID sb_EventType sb_EventID sb_InputArg Copyright 2013 Lenel Systems International, Inc. 28 3 (L_EVENTTYPE_AREACONTROL) 5 (L_AREA_GRANTEDAPBNOTUSED) Used to indicate the elevator floor number when event is generated for an elevator reader (0 25 indicates no floor number associated with event). sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Badge ID. su_EventData.us_DataCA.sl_IssueCode Issue code of the badge (-1 indicates that the issue code is not available). Anti-Passback Invalid Exit Reader Currently this event is not used. ID sb_EventType sb_EventID 29 3 (L_EVENTTYPE_AREACONTROL) 6 (L_AREA_APB_INVALID_EXIT_RDR) Anti-Passback Invalid Entry Reader Currently this event is not used. ID sb_EventType sb_EventID 30 3 (L_EVENTTYPE_AREACONTROL) 7 (L_AREA_APB_INVALID_ENTRY_RDR) Copyright 2013 Lenel Systems International, Inc. 26 System Events Not Configured Event used to indicate that a device is not configured in the system. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 33 4 (L_EVENTTYPE_SYSTEM) 0 (L_SYSTEM_OFFLINE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Alarm Canceled Indicates that an alarm active condition has been canceled. Event Pair – Restoring (35). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 34 4 (L_EVENTTYPE_SYSTEM) 1 (L_SYSTEM_ONLINE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Alarm Active Event used to indicate that an alarm active for a device. Event Pair – Initiating (34) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 35 4 (L_EVENTTYPE_SYSTEM) 2 (L_SYSTEM_ALARM) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Copyright 2013 Lenel Systems International, Inc. 27 Tamper Alarm Active Currently this event is not being generated. See the cabinet tamper events. ID sb_EventType sb_EventID 36 4 (L_EVENTTYPE_SYSTEM) 3 (L_SYSTEM_TAMPER) Line Error Active Event used to indicate a line error active condition. Event Pair – Initiating (55) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 37 4 (L_EVENTTYPE_SYSTEM) 4 (L_SYSTEM_LINEERROR) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Shorted Line Alarm Active Event used to indicate a shorted line alarm active condition. Event Pair – Initiating (56) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 38 4 (L_EVENTTYPE_SYSTEM) 5 (L_SYSTEM_SHORTEDLINE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Open Line Alarm Active Event used to indicate an open line alarm active condition. Event Pair – Initiating (57) ID sb_EventType sb_EventID ss_AccessPanelID 39 4 (L_EVENTTYPE_SYSTEM) 6 (L_SYSTEM_OPENLINE) Panel ID Copyright 2013 Lenel Systems International, Inc. 28 sb_DeviceID sb_InputDevID sb_EventDataType Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Grounded Loop Alarm Active Event used to indicate a grounded loop alarm active condition. Event Pair – Initiating (58) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 40 4 (L_EVENTTYPE_SYSTEM) 7 (L_SYSTEM_GROUNDEDLOOP) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Door Forced Open Event used to indicate that a door forced open condition exists. Event Pair – Initiating (42) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 41 4 (L_EVENTTYPE_SYSTEM) 8 (L_SYSTEM_FORCEDOPEN) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Door Forced Open Canceled Event used to indicate that a door forced open condition has been canceled. Event Pair – Restoring (41) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 42 4 (L_EVENTTYPE_SYSTEM) 9 (L_SYSTEM_FORCEDCANCEL) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Copyright 2013 Lenel Systems International, Inc. 29 Door Held Open Event used to indicate a door held open condition. Event Pair – Initiating (44) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 43 4 (L_EVENTTYPE_SYSTEM) 10 (L_SYSTEM_HELDOPEN) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Door Held Open Canceled Event used to indicate a door held open condition has been canceled. Event Pair – Restoring (43) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 44 4 (L_EVENTTYPE_SYSTEM) 11 (L_SYSTEM_HELDOPEN) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Reader Input Tamper Event used to indicate a reader input tamper. The sub device for this event is the reader. Event Pair – Initiating (48) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 47 4 (L_EVENTTYPE_SYSTEM) 14 (L_SYSTEM_READERINPUT) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Copyright 2013 Lenel Systems International, Inc. 30 Reader Input Tamper Canceled This event is used to indicate a reader input tamper condition has been canceled. The sub device for this event is the reader. Event Pair – Restoring (47) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 48 4 (L_EVENTTYPE_SYSTEM) 15 (L_SYSTEM_READERINPUTCANCEL) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Door Contact Tamper Event used to indicate a door contact tamper condition. The sub device for this event is the reader. Event Pair – Initiating (50) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 49 4 (L_EVENTTYPE_SYSTEM) 16 (L_SYSTEM_DOORCONTACT) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Door Contact Tamper Canceled Event used to indicate a door contact tamper condition has been canceled. The sub device for this event is the reader. Event Pair – Restoring (49) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 50 4 (L_EVENTTYPE_SYSTEM) 17 (L_SYSTEM_DOORCONTACTCANCEL) Panel ID Sub device ID (0 if event is for panel). EVENT_DATA_TYPE_STATUS Cabinet Tamper Event used to indicate a cabinet tamper on a device. Copyright 2013 Lenel Systems International, Inc. 31 Event Pair – Initiating (52) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 51 4 (L_EVENTTYPE_SYSTEM) 18 (L_SYSTEM_CABINETTAMPER) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Canceled Cabinet Tamper Event used to indicate a cabinet tamper has been canceled. Event Pair – Restoring (51) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 52 4 (L_EVENTTYPE_SYSTEM) 19 (L_SYSTEM_CABINETCANCEL) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Power Failure Event used to indicate a power failure on a device. Event Pair – Initiating (54) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 53 4 (L_EVENTTYPE_SYSTEM) 20 (L_SYSTEM_POWERFAILURE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Canceled Power Failure Event used to indicate a power failure condition has been canceled. Event Pair – Restoring (53) ID sb_EventType sb_EventID 54 4 (L_EVENTTYPE_SYSTEM) 21 (L_SYSTEM_POWERCANCEL) Copyright 2013 Lenel Systems International, Inc. 32 ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Canceled Line Error Event used to indicate that a line error condition has been canceled. Event Pair – Restoring (37) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 55 4 (L_EVENTTYPE_SYSTEM) 22 (L_SYSTEM_LINEERRORCANCEL) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Canceled Shorted Line Event used to indicate that a shorted line condition has been canceled. Event Pair – Restoring (38) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 56 4 (L_EVENTTYPE_SYSTEM) 23 (L_SYSTEM_SHORTEDLINECANCEL) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Canceled Open Line Event used to indicate that an open line condition has been canceled. Event Pair – Restoring (39) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 57 4 (L_EVENTTYPE_SYSTEM) 24 (L_SYSTEM_OPENLINECANCEL) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Copyright 2013 Lenel Systems International, Inc. 33 Canceled Grounded Loop Event used to indicate that a grounded loop condition has been canceled. Event Pair – Restoring (40) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 58 4 (L_EVENTTYPE_SYSTEM) 25 (L_SYSTEM_GROUNDEDLOOPCANCEL) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Panel Power Up Complete Event used to indicate that the panel power up is complete. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType su_EventData.us_DataStatusChg.sw_ComStatus 61 4 (L_EVENTTYPE_SYSTEM) 28 (L_SYSTEM_POWERUPEVENT) Panel ID. EVENT_DATA_TYPE_STATUS 0 Full Panel Download Started This event is used internally by the Lenel Communication Server to indicate that a full database download has started. ID sb_EventType sb_EventID ss_AccessPanelID sb_InputDevID sb_EventDataType 78 4 (L_EVENTTYPE_SYSTEM) 45 (L_SYSTEM_DOWNLOAD_STARTED) Panel ID. Data type. EVENT_DATA_TYPE_STATUSREQUEST Database Error in Panel Download This event is used internally by the Lenel Communication Server to indicate that a full database download had an error (database) ID sb_EventType 79 4 (L_EVENTTYPE_SYSTEM) Copyright 2013 Lenel Systems International, Inc. 34 sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 46 (L_SYSTEM_DOWNLOAD_DB_ERROR) Panel ID. Device ID. Data type. EVENT_DATA_TYPE_STATUS Driver Error In Panel Download This event is used internally by the Lenel Communication Server to indicate that a full database download had an error (driver) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 80 4 (L_EVENTTYPE_SYSTEM) 47 (L_SYSTEM_DOWNLOAD_DRIVER_ERROR) Panel ID. Device ID. Data type. EVENT_DATA_TYPE_STATUS Full Panel Download Completed This event is used internally by the Lenel Communication Server to indicate that a full database download has completed. ID sb_EventType sb_EventID ss_AccessPanelID sb_InputDevID sb_EventDataType 81 4 (L_EVENTTYPE_SYSTEM) 48 (L_SYSTEM_DOWNLOAD_FINISHED) Panel ID. Data type. EVENT_DATA_TYPE_STATUSREQUEST Relay Contact Activated Event used to indicate that a relay contact has been activated. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 86 4 (L_EVENTTYPE_SYSTEM) 53 (L_SYSTEM_OUTPUT_OPEN) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Copyright 2013 Lenel Systems International, Inc. 35 Relay Contact Deactivated Event used to indicate that a relay contact has been deactivated. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventDataType 87 4 (L_EVENTTYPE_SYSTEM) 54 (L_SYSTEM_OUTPUT_CLOSED) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). EVENT_DATA_TYPE_STATUS Host Executed Function List Generated when a function list has been executed from the host. ID sb_EventType sb_EventID sb_EventDataType 88 4 (L_EVENTTYPE_SYSTEM) 55 (L_SYSTEM_HOSTTRIGGERED_FUNCTION) EVENT_IV_TYPE_HOST Door Shunt Command Executed From Reader Event indicating that the door shunt command executed from the reader. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 89 4 (L_EVENTTYPE_SYSTEM) 56 (L_SYSTEM_DOOR_SHUNT_CMD) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ Card Number (Optional) Command Pin+10 Set From Reader Event indicating that the Pin+10 command was executed at the reader. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 90 4 (L_EVENTTYPE_SYSTEM) 57 (L_SYSTEM_SET_FUNC_TRUE_CMD) Panel ID Reader ID. 36 sb_EventDataType EVENT_IV_TYPE_CMD_REQ (Optional) su_EventData.us_DataCmdReq.sl_CardNumber Card number (Optional) Command Pin+20 Set From Reader Event indicating that the Pin+20 reader command was executed at the reader. ID sb_EventType sb_EventID 91 4 (L_EVENTTYPE_SYSTEM) 58 (L_SYSTEM_SET_FUNC_FALSE_CMD) ss_AccessPanelID Panel ID sb_DeviceID Reader ID. sb_EventDataType EVENT_IV_TYPE_CMD_REQ (Optional) su_EventData.us_DataCmdReq.sl_CardNumber Card number (Optional) Door Shunt Command Results - Canceled Event indicating that the door shunt command results was a cancel. ID sb_EventType sb_EventID 92 4 (L_EVENTTYPE_SYSTEM) 59 (L_SYSTEM_DOOR_SHUNT_CMD_RESULTS) ss_AccessPanelID Panel ID sb_DeviceID Reader ID. sb_EventDataType EVENT_IV_TYPE_CMD_RES su_EventData.us_DataCmdRes.sb_Results ??? Command 4 Set From Reader Reader command 4 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber Copyright 2013 Lenel Systems International, Inc. 95 4 (L_EVENTTYPE_SYSTEM) 62 (L_SYSTEM_SET_FUNC_CMD4) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) 37 Command 5 Set From Reader Reader command 5 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 96 4 (L_EVENTTYPE_SYSTEM) 63 (L_SYSTEM_SET_FUNC_CMD5) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 6 Set From Reader Reader command 6 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 97 4 (L_EVENTTYPE_SYSTEM) 64 (L_SYSTEM_SET_FUNC_CMD6) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 7 Set From Reader Reader command 7 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 98 4 (L_EVENTTYPE_SYSTEM) 65 (L_SYSTEM_SET_FUNC_CMD7) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 8 Set From Reader Reader command 8 was executed. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 99 4 (L_EVENTTYPE_SYSTEM) 66 (L_SYSTEM_SET_FUNC_CMD8) 38 ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 9 Set From Reader Reader command 9 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 100 4 (L_EVENTTYPE_SYSTEM) 67 (L_SYSTEM_SET_FUNC_CMD9) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 10 Set From Reader Reader command 10 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 101 4 (L_EVENTTYPE_SYSTEM) 68 (L_SYSTEM_SET_FUNC_CMD10) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 11 Set From Reader Reader command 11 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber Copyright 2013 Lenel Systems International, Inc. 102 4 (L_EVENTTYPE_SYSTEM) 69 (L_SYSTEM_SET_FUNC_CMD11) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) 39 Command 12 Set From Reader Reader command 12 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 103 4 (L_EVENTTYPE_SYSTEM) 70 (L_SYSTEM_SET_FUNC_CMD12) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 13 Set From Reader Reader command 13 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 104 4 (L_EVENTTYPE_SYSTEM) 71 (L_SYSTEM_SET_FUNC_CMD13) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 14 Set From Reader Reader command 14 was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber 105 4 (L_EVENTTYPE_SYSTEM) 72 (L_SYSTEM_SET_FUNC_CMD14) Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Command 15 Set From Reader Reader command 15 was executed. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 106 4 (L_EVENTTYPE_SYSTEM) 73 (L_SYSTEM_SET_FUNC_CMD15) 40 ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCmdReq.sl_CardNumber Panel ID Reader ID. EVENT_IV_TYPE_CMD_REQ (optional) Card number (optional) Communications Lost Event used to indicate that communication has been lost to the device. Event Pair – Initiating (110) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_DeviceType 109 4 (L_EVENTTYPE_SYSTEM) 76 (L_SYSTEM_COMM_LOST) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). if sb_DeviceID is an input channel from a Video Camera then set this variable to L_DEVICETYPE_CCTVCAMERA otherwise set it equal to 0 Communications Restored Event used to indicate that communication to the device has been restored. Event Pair – Restoring (109) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_DeviceType 110 4 (L_EVENTTYPE_SYSTEM) 77 (L_SYSTEM_COMM_RESTORED) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). if sb_DeviceID is an input channel from a Video Camera then set this variable to L_DEVICETYPE_CCTVCAMERA otherwise set it equal to 0 Local I/O Executed Function List Event used to indicate that a Global I/O function list was executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_InputArg 111 4 (L_EVENTTYPE_SYSTEM) 78 (L_SYSTEM_GIO_FUNC_LIST) Panel ID. Operation executed on function list: Copyright 2013 Lenel Systems International, Inc. 41 sb_IV 1 - False 2 - True 3 – Pulse Function list ID. Watch Tour Station Late Currently this event is not being used. ID sb_EventType sb_EventID 175 4 (L_EVENTTYPE_SYSTEM) 142 (L_SYSTEM_SYS_TOUR_LATE) Disk Full Warning Currently this event is not being used. ID sb_EventType sb_EventID 181 4 (L_EVENTTYPE_SYSTEM) 146 (L_SYSTEM_SYS_DISK_FULL) Database Error: Event Polling Stopped Event generated by the Communication Server to indicate to Alarm Monitoring that the event polling has stopped because of a database problem (events could not be written to the database). ID sb_EventType sb_EventID ss_AccessPanelID 219 4 (L_EVENTTYPE_SYSTEM) 181 (L_SYSTEM_DB_ERR_POLLING_STOPPED) Panel ID Dialup Stored Command Limit Exceeded Event generated by the Communication Server to indicate that the number of stored commands for the dialup panel has been exceeded (based on the setting in the ACS.INI file). ID sb_EventType sb_EventID ss_AccessPanelID 768 4 (L_EVENTTYPE_SYSTEM) 183 (L_SYSTEM_DIALUP_LOWWATERMARK) Panel ID Copyright 2013 Lenel Systems International, Inc. 42 Dialup Last Connection Time Expired Event generated by the Communication Server to indicate that a dialup has not called back (connected) within a certain amount of time (configured in the ACS.INI file). ID sb_EventType sb_EventID ss_AccessPanelID 769 4 (L_EVENTTYPE_SYSTEM) 184 (L_SYSTEM_DIALUP_LASTTIMEEXPIRED) Panel ID Low Voltage Event used to indicate a low voltage condition for a device. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 775 4 (L_EVENTTYPE_SYSTEM) 190 (L_SYSTEM_LOW_VOLTAGE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Low Voltage Restored Event used to indicate that a low voltage condition has been restored. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 776 4 (L_EVENTTYPE_SYSTEM) 191 (L_SYSTEM_LOW_VOLTAGE_RESTORED) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Communication Path Switch - Primary to Secondary Event used to indicate that the communications switched from the primary communication path to the secondary communication path. This is used when dual paths are being used. ID sb_EventType sb_EventID ss_AccessPanelID Copyright 2013 Lenel Systems International, Inc. 795 4 (L_EVENTTYPE_SYSTEM) 192 (L_SYSTEM_COMM_SWITCH_ALT Panel ID. 43 Communication Path Switch - Secondary to Primary Event used to indicate that the communications switched from the secondary communication path to the primary communication path. This is used when dual paths are being used. ID sb_EventType sb_EventID ss_AccessPanelID 796 4 (L_EVENTTYPE_SYSTEM) 193 (L_SYSTEM_COMM_SWITCH_PRI) Panel ID. Secondary Communication Path Lost Event used to indicate that the secondary communication path was lost. This is used when dual paths are being used. ID sb_EventType sb_EventID ss_AccessPanelID 797 4 (L_EVENTTYPE_SYSTEM) 194 (L_SYSTEM_COMM_ALT_LOST) Panel ID. Secondary Communication Path Restored Event used to indicate that the secondary communication path was restored. This is used when dual paths are being used. ID sb_EventType sb_EventID ss_AccessPanelID 798 4 (L_EVENTTYPE_SYSTEM) 195 (L_SYSTEM_COMM_ALT_RESTORE) Panel ID. Primary Communication Path Lost Event used to indicate that the primary communication path was lost. This is used when dual paths are being used. ID sb_EventType sb_EventID ss_AccessPanelID Copyright 2013 Lenel Systems International, Inc. 799 4 (L_EVENTTYPE_SYSTEM) 196 (L_SYSTEM_COMM_PRI_LOST) Panel ID. 44 Primary Communication Path Restored Event used to indicate that the primary communication path was restored. This is used when dual paths are being used. ID sb_EventType sb_EventID ss_AccessPanelID 800 4 (L_EVENTTYPE_SYSTEM) 197 (L_SYSTEM_COMM_PRI_RESTORE) Panel ID. Reader Mode Facility Code Whenever a reader mode becomes active, this event is generated to indicate the switchover to this mode. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 802 4 (L_EVENTTYPE_SYSTEM) 198 (L_SYSTEM_RDR_MODE_FC) Panel ID. Device ID. Reader Mode Card Only Whenever a reader mode becomes active, this event is generated to indicate the switchover to this mode. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 803 4 (L_EVENTTYPE_SYSTEM) 199 (L_SYSTEM_RDR_MODE_CARD_ONLY) Panel ID. Device ID. Reader Mode First Card Unlock Whenever a reader mode becomes active, this event is generated to indicate the switchover to this mode. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 804 4 (L_EVENTTYPE_SYSTEM) 200 (L_SYSTEM_RDR_MODE_1ST_CARDUNLCK) 45 ss_AccessPanelID sb_DeviceID Panel ID. Device ID. Reader Mode Unlocked Whenever a reader mode becomes active, this event is generated to indicate the switchover to this mode. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 805 4 (L_EVENTTYPE_SYSTEM) 201 (L_SYSTEM_RDR_MODE_UNLOCKED) Panel ID. Device ID. Reader Mode Locked Whenever a reader mode becomes active, this event is generated to indicate the switchover to this mode. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 806 4 (L_EVENTTYPE_SYSTEM) 202 (L_SYSTEM_RDR_MODE_LOCKED) Panel ID. Device ID. Reader Reset This event is generated whenever the firmware resets the reader. This can happen when the firmware detects the reader needs to be reset. This occurs if the reader is brand new. This can also be due to a failed/incomplete download, or other internal conditions that cause the firmware to reset such as detecting possible corrupt memory, etc. In such cases, the firmware will rewrite its entire storage with default values, thus overwriting the downloaded values. The user must reprogram the lockset when this happens. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 807 4 (L_EVENTTYPE_SYSTEM) 203 (L_SYSTEM_READER_RESET2) Panel ID. Device ID. Key Override Key override. Copyright 2013 Lenel Systems International, Inc. 46 ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 808 4 (L_EVENTTYPE_SYSTEM) 204 (L_SYSTEM_KEY_OVERRIDE) Panel ID. Device ID. Transfer, PDA To Lock This event is generated when the device (lockset) is programmed / reprogrammed through a download (from a PDA). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 809 4 (L_EVENTTYPE_SYSTEM) 205 (L_SYSTEM_TRANSFER_PDA_TO_LOCK) Panel ID. Device ID. EVENT_DATA_TYPE_CA Badge ID. Issue code of the badge (-1 indicates that the issue code is not available). Transfer, History This event is generated when the history data is transferred from a device to a parent device (panel). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 810 4 (L_EVENTTYPE_SYSTEM) 206 (L_SYSTEM_TRANSFER_HISTORY) Panel ID. Device ID. EVENT_DATA_TYPE_CA Badge ID. Issue code of the badge (-1 indicates that the issue code is not available). Transfer, Diagnostics This event is generated whenever a user logs in to the device for diagnostics purposes. ID sb_EventType Copyright 2013 Lenel Systems International, Inc. 811 4 (L_EVENTTYPE_SYSTEM) 47 sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode 207 (L_SYSTEM_TRANSFER_DIAGNOSTICS) Panel ID. Device ID. EVENT_DATA_TYPE_CA Badge ID. Issue code of the badge (-1 indicates that the issue code is not available). Input Masked Input became masked. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 831 4 (L_EVENTTYPE_SYSTEM) 208 (L_SYSTEM_INPUT_MASKED) Panel ID Device ID Input ID Input Unmasked Input became unmasked. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 832 4 (L_EVENTTYPE_SYSTEM) 209 (L_SYSTEM_INPUT_UNMASKED) Panel ID Device ID Input ID Door Forced Open Masked Door Forced Masked. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 833 4 (L_EVENTTYPE_SYSTEM) 210 (L_SYSTEM_DOOR_FORCED_MASKED) Panel ID Device ID (Reader) 48 Door Forced Open Unmasked Door Forced Unmasked. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 834 4 (L_EVENTTYPE_SYSTEM) 211 (L_SYSTEM_DOOR_FORCED_UNMASKED) Panel ID Device ID (Reader) Door Held Open Masked Indicates that the mask for the door held open has become masked. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 835 4 (L_EVENTTYPE_SYSTEM) 212 (L_SYSTEM_DOOR_HELDOPEN_MASKED) Panel ID Device ID (Reader) Door Held Open Unmasked Indicates that the mask for door held open became unmasked. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 836 4 (L_EVENTTYPE_SYSTEM) 213 (L_SYSTEM_DOOR_HELDOPEN_UNMASKED) Panel ID Device ID (Reader) Reader Mode Pin or Card Indicates that the reader mode changed to Pin or Card. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 837 4 (L_EVENTTYPE_SYSTEM) 214 (L_SYSTEM_RDR_MODE_PIN_OR_CARD) Panel ID Device ID (Reader) 49 Reader Mode Card and Pin Indicates that the reader mode changed to Pin and Card. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 838 4 (L_EVENTTYPE_SYSTEM) 215 (L_SYSTEM_RDR_MODE_PIN_AND_CARD) Panel ID Device ID (Reader) Panel Options Mismatch Event that indicates that the current options in the panel differ from what is configured in the database. ID sb_EventType sb_EventID ss_AccessPanelID 842 4 (L_EVENTTYPE_SYSTEM) 216 (L_SYSTEM_PANEL_OPTIONS_MISMATCH) Panel ID Max Cardholders Reached Event used to indicate that the max number of cardholders for the controller has been reached during a database download. All remaining cardholders will not be sent to the panel. ID sb_EventType sb_EventID ss_AccessPanelID 845 4 (L_EVENTTYPE_SYSTEM) 217 (L_SYSTEM_MAX_CARDHOLDERS_REACHED) Panel ID Max Assets Reached Event used to indicate that the max number of assets for the controller has been reached during a database download. All remaining assets will not be sent to the panel. ID sb_EventType sb_EventID ss_AccessPanelID Copyright 2013 Lenel Systems International, Inc. 846 4 (L_EVENTTYPE_SYSTEM) 218 (L_SYSTEM_MAX_ASSETS_REACHED) Panel ID 50 Failed To Report Expected Event Indicates that a device that is supposed to report in has failed to do so. ID sb_EventType sb_EventID ss_AccessPanelID 1499 4 (L_EVENTTYPE_SYSTEM) 420 (L_SYSTEM_FAILED_TO_REPORT) Panel ID Scheduler Action Failed Used to indicate that a scheduler action failed. ID sb_EventType sb_EventID sl_SegmentID sb_AssociatedText 1502 4 (L_EVENTTYPE_SYSTEM) 421 (L_SYSTEM_SCHEDULER_ACTION_FAILED) Segment ID Action events contain associated text with the description of the action. Scheduler Action Executed Used to indicate that a scheduler action has executed. ID sb_EventType sb_EventID sl_SegmentID sb_AssociatedText 1503 4 (L_EVENTTYPE_SYSTEM) 422 (L_SYSTEM_SCHEDULER_ACTION_EXECUTED) Segment ID Action events contain associated text with the description of the action. Guard Tour Action Failed Used to indicate that a guard tour action failed. ID sb_EventType sb_EventID sl_SegmentID sb_AssociatedText Copyright 2013 Lenel Systems International, Inc. 1504 4 (L_EVENTTYPE_SYSTEM) 423 (L_SYSTEM_GUARD_TOUR_ACTION_FAILED) Segment ID Action events contain associated text with the 51 description of the action. Guard Tour Action Executed Used to indicate that a guard tour action has executed. ID sb_EventType sb_EventID 1505 4 (L_EVENTTYPE_SYSTEM) 424 (L_SYSTEM_GUARD_TOUR_ACTION_EXECUTED) Segment ID Action events contain associated text with the description of the action. sl_SegmentID sb_AssociatedText Global Linkage Action Failed Used to indicate that a global linkage action failed. ID sb_EventType sb_EventID 1506 4 (L_EVENTTYPE_SYSTEM) 425 (L_SYSTEM_GLOBAL_LINKAGE_ACTION_FAILED) Segment ID Action events contain associated text with the description of the action. sl_SegmentID sb_AssociatedText Global Linkage Action Executed Used to indicate that a Global Linkage action has executed. ID sb_EventType sb_EventID sl_SegmentID sb_AssociatedText 1507 4 (L_EVENTTYPE_SYSTEM) 426 (L_SYSTEM_GLOBAL_LINKAGE_ACTION_EXECUTED) Segment ID Action events contain associated text with the description of the action. Invalid Device Serial Number Event used to indicate that the device has an invalid serial number. ID Copyright 2013 Lenel Systems International, Inc. 1510 52 sb_EventType sb_EventID 4 (L_EVENTTYPE_SYSTEM) 427 (L_SYSTEM_INVALID_DEVICE_SERIAL_NUMBER) Panel ID. Device ID. ss_AccessPanelID sb_DeviceID Invalid Device Type Mismatch Event used to indicate that the device type is incorrect. ID sb_EventType sb_EventID 1511 4 (L_EVENTTYPE_SYSTEM) 428 (L_SYSTEM_DEVICE_TYPE_MISMATCH) Panel ID. Device ID. ss_AccessPanelID sb_DeviceID Panel ID Mismatch Event used to indicate that panel ID doesn’t match what is expected. ID sb_EventType sb_EventID ss_AccessPanelID 1512 4 (L_EVENTTYPE_SYSTEM) 429 (L_SYSTEM_PANEL_ID_MISMATCH) Panel ID. Panel Free Memory Low Event used to indicate that the free memory in the panel/controller is low. ID sb_EventType sb_EventID 1513 4 (L_EVENTTYPE_SYSTEM) 430 (L_SYSTEM_PANEL_FREE_MEMORY_LOW) Panel ID. ss_AccessPanelID First Card Unlock Mode Enabled Generated when first card unlock mode is enabled for a door. ID sb_EventType sb_EventID 1542 4 (L_EVENTTYPE_SYSTEM) 440 Copyright 2013 Lenel Systems International, Inc. 53 ss_AccessPanelID sb_DeviceID sb_EventDataType (L_SYSTEM_FIRST_CARD_UNLOCK_MODE_ENABLED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS First Card Unlock Mode Disabled Generated when first card unlock mode is disabled for a door. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1543 4 (L_EVENTTYPE_SYSTEM) 441 (L_SYSTEM_FIRST_CARD_UNLOCK_MODE_DISABLED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Extended Held Open Mode Enabled Generated when extended held open mode is enabled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1544 4 (L_EVENTTYPE_SYSTEM) 442 (L_SYSTEM_EXTENDED_HELD_OPEN_MODE_ENABLED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Extended Held Open Mode Disabled Generated when extended held open mode is disabled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1545 4 (L_EVENTTYPE_SYSTEM) 443 (L_SYSTEM_EXTENDED_HELD_OPEN_MODE_DISABLED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Copyright 2013 Lenel Systems International, Inc. 54 Cipher Mode Enabled Generated when cipher mode is enabled for a reader. When this occurs card data can be entered via the keypad. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1546 4 (L_EVENTTYPE_SYSTEM) 444 (L_SYSTEM_CIPHER_MODE_ENABLED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Cipher Mode Disabled Generated when Cipher mode is disabled for a reader. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1547 4 (L_EVENTTYPE_SYSTEM) 445 (L_SYSTEM_CIPHER_MODE_DISABLED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Biometric Verify Mode Enabled Generated when biometric verify mode is enabled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1548 4 (L_EVENTTYPE_SYSTEM) 446 (L_SYSTEM_BIO_VERIFY_MODE_ENABLED) Panel ID. Device ID (ReaderID) EVENT_DATA_TYPE_STATUS Biometric Verify Mode Disabled Generated when biometric verify mode is disabled. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1549 4 (L_EVENTTYPE_SYSTEM) 447 55 ss_AccessPanelID sb_DeviceID sb_EventDataType (L_SYSTEM_BIO_VERIFY_MODE_DISABLED) Panel ID. Device ID (ReaderID) EVENT_DATA_TYPE_STATUS Extended Held Command Denied Generated when an extended held command is denied. ID sb_EventType sb_EventID 1552 4 (L_EVENTTYPE_SYSTEM) 448 (L_SYSTEM_EXT_HELD_CMND_DENIED) ss_AccessPanelID Panel ID. sb_DeviceID Device ID (Reader ID) sb_EventDataType EVENT_DATA_TYPE_USERCMD su_EventData.us_UserCmdData.sl_CardNumber Card Number of user executing command sb_EventParam Whether or not a parameter value is associated with this event (0- No, 1 – Yes). sl_EventParamValue Command Denied ID to indicate the type of denial for the user command. Extended Held Command Set From Reader Generated when an extended held command is entered at the reader. ID sb_EventType sb_EventID 1553 4 (L_EVENTTYPE_SYSTEM) 449 (L_SYSTEM_EXT_HELD_CMND_ACCEPTED) ss_AccessPanelID Panel ID. sb_DeviceID Device ID (Reader ID) sb_EventDataType EVENT_DATA_TYPE_USERCMD su_EventData.us_UserCmdData.sl_CardNumber Card Number of user executing command Max Bio Templates Reached Indicates that the maximum biometric templates of a given type has been reached in the controller during a database download. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1784 4 (L_EVENTTYPE_SYSTEM) 535 56 (L_SYSTEM_MAX_BIO_TEMPLATES_REACHED) Acknowledgment Action Executed Indicates that an action has been executed from an alarm acknowledgment. ID sb_EventType sb_EventID 1785 4 (L_EVENTTYPE_SYSTEM) 536 (L_SYSTEM_ACKNOWLEDGMENT_ACTION_EXECUTED) Acknowledgment Action Failed Indicates that an action that was executed from an alarm acknowledgment failed. ID sb_EventType sb_EventID 1786 4 (L_EVENTTYPE_SYSTEM) 537 (L_SYSTEM_ACKNOWLEDGMENT_AC TION_FAILED) Alarm Monitoring Action Group Executed Indicates that an action group was executed from Alarm Monitoring. ID sb_EventType sb_EventID 1787 4 (L_EVENTTYPE_SYSTEM) 538 (L_SYSTEM_ALARM_MONITORING_ACTION_GROUP_EXECUTED) ss_AccessPanelID Panel ID Alarm Monitoring Action Group Failed Indicates that an action group failed to be executed from Alarm Monitoring. ID sb_EventType sb_EventID ss_AccessPanelID 1788 4 (L_EVENTTYPE_SYSTEM) 539 (L_SYSTEM_ALARM_MONITORING_ACTION_GROUP_FAILED) Panel ID Copyright 2013 Lenel Systems International, Inc. 57 Communication Initialization Failed Used to indicate that initialization to the device failed. This is mainly used by the Communication Server when it fails to startup a controller because of a communication issue. ID sb_EventType sb_EventID 1790 4 (L_EVENTTYPE_SYSTEM) 540 (L_SYSTEM_COMMUNICATION_INIT_FAILED) Panel ID ss_AccessPanelID User Failed To Reach Destination Used by the Destination Assurance feature to indicate that a user (cardholder) failed to reach the destination in the allotted amount of time. ID sb_EventType sb_EventID ss_AccessPanelID 1791 4 (L_EVENTTYPE_SYSTEM) 541 (L_SYSTEM_USER_FAILED_TO_REACH_DESTINATION) Panel ID Unexpected Access Attempt Used by the Destination Assurance feature to indicate that a cardholder attempted access at an unexpected destination reader. ID sb_EventType sb_EventID ss_AccessPanelID 1792 4 (L_EVENTTYPE_SYSTEM) 542 (L_SYSTEM_UNEXPECTED_ACCESS_ATTEMPT) Panel ID Unexpected Access Used by the Destination Assurance feature to indicate that a cardholder gained access at an unexpected reader. ID sb_EventType sb_EventID ss_AccessPanelID Copyright 2013 Lenel Systems International, Inc. 1793 4 (L_EVENTTYPE_SYSTEM) 543 (L_SYSTEM_UNEXPECTED_ACCESS) Panel ID 58 Reader Low Battery Generated when a reader has a low battery. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1814 4 (L_EVENTTYPE_SYSTEM) 544 (L_SYSTEM_READER_LOW_BATTERY) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Reader Low Battery Restored Generated when a reader low battery condition has been restored. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1815 4 (L_EVENTTYPE_SYSTEM) 545 (L_SYSTEM_READER_LOW_BATTERY_RESTORED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Reader Motor Stalled Generated when the motor stalls on a reader. ID sb_EventType sb_EventID 1816 4 (L_EVENTTYPE_SYSTEM) 546 (L_SYSTEM_READER_MOTOR_STALLED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS ss_AccessPanelID sb_DeviceID sb_EventDataType Reader Motor Stalled Restored Generated when a motor stalled condition has been restored. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1817 4 (L_EVENTTYPE_SYSTEM) 547 (L_SYSTEM_READER_MOTOR_STALLED_RESTORED) 59 ss_AccessPanelID sb_DeviceID sb_EventDataType Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_STATUS Controller Encryption Error Generated in several instances, including when: • A controller is configured for a plain connection when it requires encryption. • An encrypted controller is online, but its configuration is changed to a plain connection. • A controller is configured for a plain connection, but then a physical controller swap is made where the new controller requires encryption. • A controller that supports encryption is currently online with a plan connection, and then the DIR switch 8 is turned on. ID sb_EventType sb_EventID 1873 4 (L_EVENTTYPE_SYSTEM) 548 (L_SYSTEM_CONTROLLER_ENCRYPTION_ERROR) Panel ID. EVENT_DATA_TYPE_STATUS ss_AccessPanelID sb_EventDataType Controller Connection Mismatch Generated when the OnGuard attempts to make a connection to a controller by upgrading or degrading the connection while the controller is online. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType 1874 4 (L_EVENTTYPE_SYSTEM) 549 (L_SYSTEM_CONTROLLER_CONNECTION_MISMATCH) Panel ID. EVENT_DATA_TYPE_STATUS History Report Start Generated when a controller or device starts to report the contents of its internal event buffer. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1881 4 (L_EVENTTYPE_SYSTEM) 550 (L_SYSTEM_HISTORY_START) Panel ID. EVENT_DATA_TYPE_STATUS 60 History Report End Generated when a controller or device ends reporting the contents of its internal event buffer. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType 1882 4 (L_EVENTTYPE_SYSTEM) 551 (L_SYSTEM_HISTORY_END) Panel ID. EVENT_DATA_TYPE_STATUS Point Enabled Generated when an input point is the system has been enabled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1883 4 (L_EVENTTYPE_SYSTEM) 552 (L_SYSTEM_POINT_ENABLE) Panel ID. Device ID (Input point) EVENT_DATA_TYPE_STATUS Point Disabled Generated when an input point is the system has been disabled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1884 4 (L_EVENTTYPE_SYSTEM) 553 (L_SYSTEM_POINT_DISABLE) Panel ID. Device ID (Input point) EVENT_DATA_TYPE_STATUS Door Open An event indicating that the door has opened. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 1887 4 (L_EVENTTYPE_SYSTEM) 554 (L_SYSTEM_DOOR_OPEN) Panel ID. Device ID 61 Door Close Generated when a door closes. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1888 4 (L_EVENTTYPE_SYSTEM) 555 (L_SYSTEM_DOOR_CLOSE) Panel ID. Device ID Communications With Host Lost An event was generated by the hardware when communications with the host was lost. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType 1889 4 (L_EVENTTYPE_SYSTEM) 556 (L_SYSTEM_COMM_LOST_WITH_HOST) Panel ID. EVENT_DATA_TYPE_STATUS Communications With Host Restored An event was generated by the hardware when communications with the host was restored. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType 1890 4 (L_EVENTTYPE_SYSTEM) 557 (L_SYSTEM_COMM_RESTORED_WITH_HOST) Panel ID. EVENT_DATA_TYPE_STATUS Panel Event Capacity Exceeded - Events Overwritten Generated when the event log in the panel fills up and starts overwriting old events. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1905 4 (L_EVENTTYPE_SYSTEM) 558 (L_SYSTEM_EVENT_LOG_OVERWRITTEN) Panel ID. EVENT_DATA_TYPE_STATUS 62 Communication Access Denied ???. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1916 4 (L_EVENTTYPE_SYSTEM) 559 (L_SYSTEM_COMM_ACCESS_DENIED) Panel ID. ??? Communication Access Restored ???. ID sb_EventType sb_EventID 1917 4 (L_EVENTTYPE_SYSTEM) 560 (L_SYSTEM_COMM_ACCESS_RESTORED) Panel ID. ??? ss_AccessPanelID sb_DeviceID Intrusion Command Denied An attempt to execute an intrusion command was denied, either the command is not allowed at the reader, the user is not authorized for this command or invalid command arguments were supplied. ID sb_EventType sb_EventID 1920 4 (L_EVENTTYPE_SYSTEM) 561 (L_SYSTEM_ARMDISARM_CMND_DENIED ss_AccessPanelID Panel ID. sb_DeviceID Device ID (Reader ID) sb_EventDataType EVENT_DATA_TYPE_USERCMD su_EventData.us_UserCmdData.sl_AlarmMaskGroup Alarm Mask Group ID for command sb_EventParam Yes if enabled, otherwise 0 sl_EventParamValue ID used to identify reason for denial. Intrusion Command Accepted An intrusion command was successfully executed. ID Copyright 2013 Lenel Systems International, Inc. 1921 63 sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_UserCmdData. sl_AlarmMaskGroup 4 (L_EVENTTYPE_SYSTEM) 562 (L_SYSTEM_ARMDISARM_CMND_ACCEPTED) Panel ID. Device ID (Reader ID) EVENT_DATA_TYPE_USERCMD Alarm Mask Group ID for command Alarm Mask Group Armed This event is generated when the alarm mask group is armed. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType su_EventData.us_AlarmMaskGroupData. sl_AlarmMaskGroup 1922 4 (L_EVENTTYPE_SYSTEM) 563 (L_SYSTEM_ALARMMASKGROUP_ARMED) Panel ID. EVENT_DATA_TYPE_ALARMMASKGROUP Alarm Mask Group ID that was armed Alarm Mask Group Disarmed This event is generated when the alarm mask group is disarmed. ID sb_EventType sb_EventID 1923 4 (L_EVENTTYPE_SYSTEM) 564 (L_SYSTEM_ALARMMASKGROUP_DISARMED) ss_AccessPanelID Panel ID. sb_EventDataType EVENT_DATA_TYPE_ALARMMASKGROUP su_EventData.us_AlarmMaskGroupData. Alarm Mask Group ID that was disarmed sl_AlarmMaskGroup Alarm Mask Group Force Armed This event is generated when the alarm mask group is force armed. ID sb_EventType sb_EventID ss_AccessPanelID Copyright 2013 Lenel Systems International, Inc. 1924 4 (L_EVENTTYPE_SYSTEM) 565 (L_SYSTEM_ALARMMASKGROUP_FORCE_ARMED) Panel ID. 64 sb_EventDataType EVENT_DATA_TYPE_ALARMMASKGROUP su_EventData.us_AlarmMaskGroupData. Alarm Mask Group ID that was force armed sl_AlarmMaskGroup Alarm Mask Group Mask Count Incremented This event is generated when a disarm command is issued and the alarm mask group is already disarmed, causing the alarm mask count to get incremented. The alarm mask group will still remain disarmed. ID sb_EventType sb_EventID 1925 4 (L_EVENTTYPE_SYSTEM) 566 (L_SYSTEM_ALARMMASKGROUP_COUNT_INCREME ss_AccessPanelID Panel ID. sb_EventDataType EVENT_DATA_TYPE_ALARMMASKGROUP su_EventData.us_AlarmMaskGroupData. Alarm Mask Group ID that was incremented sl_AlarmMaskGroup Alarm Mask Group Mask Count Decremented This event is generated when an arm or force arm command is issued and the alarm mask group has a mask count greater than 1, causing the mask count to be decremented. The alarm mask group will still remain disarmed. ID sb_EventType sb_EventID 1926 4 (L_EVENTTYPE_SYSTEM) 567 (L_SYSTEM_ALARMMASKGROUP_COUNT_DECREM ss_AccessPanelID Panel ID. sb_EventDataType EVENT_DATA_TYPE_ALARMMASKGROUP su_EventData.us_AlarmMaskGroupData. Alarm Mask Group ID that was decremented sl_AlarmMaskGroup Alarm Mask Group Arming Failure, Active Points The following command is used to indicate an arming failure due to active points. ID sb_EventType sb_EventID ss_AccessPanelID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1927 4 (L_EVENTTYPE_SYSTEM) 568 (L_SYSTEM_ALARMMASKGROUP_ARM_FAILURE_P Panel ID. EVENT_DATA_TYPE_ALARMMASKGROUP 65 su_EventData.us_AlarmMaskGroupData. Alarm Mask Group ID that contained active points sl_AlarmMaskGroup Elevator Terminal Mode Default Floor or User Entry of Destination Floor Generated when the elevator terminal mode has changed to “Default Floor or User Entry of Destination Floor. ID sb_EventType sb_EventID 1936 4 (L_EVENTTYPE_SYSTEM) 572 (L_SYSTEM_ELV_TERM_MODE_DEFAULT_OR_DESTINATION_FLOOR) ss_AccessPanelID Panel ID. sb_DeviceID Device ID (Elevator Terminal ID) Unknown Elevator Terminal Generated when an elevator terminal is detected that has not been configured in the system. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1937 4 (L_EVENTTYPE_SYSTEM) 573 (L_SYSTEM_UNKNOWN_ELEVATOR_TERMINAL) Panel ID. Device ID (Elevator Terminal ID) Request to Exit - Door Used Generated when the request to exit is granted and the door is used. Note: If the Assumed Door Used checkbox is selected on the Readers form, then the door is assumed to be used. This might interfere with this event ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1940 4 (L_EVENTTYPE_SYSTEM) 574 (L_SYSTEM_READER_REQUEST_TO_EXIT_USED) Panel ID. Device ID (Reader ID) Request to Exit - Door Not Used Generated when the request to exit is granted and the door is not used. Copyright 2013 Lenel Systems International, Inc. 66 Note: If the Assumed Door Used checkbox is selected on the Readers form, then the door is assumed to be used. This might interfere with this event ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1941 4 (L_EVENTTYPE_SYSTEM) 575 (L_SYSTEM_READER_REQUEST_TO_EXIT_NOT_USED) Panel ID. Device ID (Reader ID) Invalid OEM Code Indicates that the hardware did not contain the expected OEM (Original Equipment Manufacturer) code. ID sb_EventType sb_EventID ss_AccessPanelID 1942 4 (L_EVENTTYPE_SYSTEM) 576 (L_SYSTEM_INVALID_OEM_CODE) Panel ID. Elevator Terminal Mode Default Floor Generated when the elevator terminal mode has changed to “Default Floor Only.. ID sb_EventType sb_EventID 1943 4 (L_EVENTTYPE_SYSTEM) 569 (L_SYSTEM_ELV_TERM_MODE_DEFAULT_FLOOR) Panel ID. Device ID (Elevator Terminal ID) ss_AccessPanelID sb_DeviceID Elevator Terminal Mode Access to Authorized Floors Generated when the elevator terminal mode has changed to “Access to Authorized Floors. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1944 4 (L_EVENTTYPE_SYSTEM) 570 (L_SYSTEM_ELV_TERM_MODE_AUTHORIZED_FLOORS) Panel ID. Device ID (Elevator Terminal ID) Copyright 2013 Lenel Systems International, Inc. 67 Elevator Terminal Mode User Entry of Destination Floor Generated when the elevator terminal mode has changed to “User Entry of Destination Floor. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1945 4 (L_EVENTTYPE_SYSTEM) 571 (L_SYSTEM_ELV_TERM_MODE_DESTINATION_FLOOR) Panel ID. Device ID (Elevator Terminal ID) License Will Soon Expire Generated when the system license is reaching its expiration date. ID sb_EventType sb_EventID 1964 4 (L_EVENTTYPE_SYSTEM) 579 (L_SYSTEM_LICENSE_EXPIRES) Reader Offline Generated when a reader has been detected as being offline. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1968 4 (L_EVENTTYPE_SYSTEM) 580 (L_SYSTEM_READER_OFFLINE) Panel ID. Device ID (Reader ID) Reader Offline Restored Generated when a reader has been detected as no longer being offline. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 1969 4 (L_EVENTTYPE_SYSTEM) 581 (L_SYSTEM_READER_OFFLINE_RESTORED) Panel ID. Device ID (Reader ID) 68 Instant Command 16 Generated when the reader instant keypad command “(#)” was executed ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1970 4 (L_EVENTTYPE_SYSTEM) 582 (L_SYSTEM_SET_INSTANT_CMD16) Panel ID. Device ID (Reader ID) Instant Command 17 Generated when the reader instant keypad command “(#)” was executed. – Need to add to Documentation. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1971 4 (L_EVENTTYPE_SYSTEM) 583 (L_SYSTEM_SET_INSTANT_CMD17) Panel ID. Device ID (Reader ID) Instant Command 18 Generated when the reader instant keypad command “(#)” was executed. – Need to add to Documentation. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1972 4 (L_EVENTTYPE_SYSTEM) 584 (L_SYSTEM_SET_INSTANT_CMD18) Panel ID. Device ID (Reader ID) Instant Command 19 Generated when the reader instant keypad command “(#)” was executed. – Need to add to Documentation. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 1973 4 (L_EVENTTYPE_SYSTEM) 585 (L_SYSTEM_SET_INSTANT_CMD19) Panel ID. Device ID (Reader ID) 69 Instant Command 20 Generated when the reader instant keypad command “(#)” was executed. – Need to add to Documentation. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1974 4 (L_EVENTTYPE_SYSTEM) 586 (L_SYSTEM_SET_INSTANT_CMD20) Panel ID. Device ID (Reader ID) Instant Command 21 Generated when the reader instant keypad command “(#)” was executed. – Need to add to Documentation. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1975 4 (L_EVENTTYPE_SYSTEM) 587 (L_SYSTEM_SET_INSTANT_CMD21) Panel ID. Device ID (Reader ID) Instant Command 22 Generated when the reader instant keypad command “(#)” was executed. – Need to add to Documentation. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1976 4 (L_EVENTTYPE_SYSTEM) 588 (L_SYSTEM_SET_INSTANT_CMD22) Panel ID. Device ID (Reader ID) Unknown User Command Generated when an unknown user command is entered through a reader. For example, if a cardholder enters the command *1234# (where that command means nothing) an unknown user command alarm is sent to Alarm Monitoring. The numbers entered as the command are used as the event text for the alarm. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1978 4 (L_EVENTTYPE_SYSTEM) 590 (L_SYSTEM_UNKNOWN_USER_COMMAND) 70 ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. Panel ID. Device ID (Reader ID) 71 Elevator Events Unknown Elevator Terminal System Generated when an elevator terminal is detected that has not been configured in the system. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType Sb_MessageTyp 1937 (4) (L_EVENTTYPE_SYSTEM) (570) (L_SYSTEM_UNKNOWN_ELEVATOR_TERMINAL) Panel ID Terminal ID EVENT_DATA_TYPE_STATUS LNLMSG_TYPE_EVENT Elevator Terminal Mode Default Floor System Generated when the elevator terminal mode has changed to "Default Floor Only." ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType sb_MessageTyp 1943 (4) (L_EVENTTYPE_SYSTEM) (569) (L_SYSTEM_ELV_TERM_MODE_DEFAULT_FLOOR) Panel ID Terminal ID EVENT_DATA_TYPE_STATUS LNLMSG_TYPE_EVENT Elevator Terminal Mode Access to Authorized Floors System Generated when the elevator terminal mode has changed to "Access to Authorized Floors." ID sb_EventType sb_EventID 1944 (4) (L_EVENTTYPE_SYSTEM) (572) (L_SYSTEM_ELV_TERM_MODE_DEFAULT_OR_DESTINATION_FLOOR) ss_AccessPanelID Panel ID sb_DeviceID Terminal ID sb_EventDataType EVENT_DATA_TYPE_STATUS Sb_MessageTyp LNLMSG_TYPE_EVENT Copyright 2013 Lenel Systems International, Inc. 72 Elevator Terminal Mode Default Floor or User Entry of Destination Floor System Generated when the elevator terminal mode has changed to "Default Floor or User Entry of Destination Floor." ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType sb_MessageTyp 1936 (4) (L_EVENTTYPE_SYSTEM) (573) (L_SYSTEM_ELV_TERM_MODE_AUTHORIZED_FLOORS) Panel ID Terminal ID EVENT_DATA_TYPE_STATUS LNLMSG_TYPE_EVENT Elevator Terminal Mode User Entry of Destination Floor System Generated when the elevator terminal mode has changed to "User Entry of Destination Floor." ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType sb_MessageTyp 1945 (4) (L_EVENTTYPE_SYSTEM) (571) (L_SYSTEM_ELV_TERM_MODE_DESTINATION_FLOOR) Panel ID terminal ID EVENT_DATA_TYPE_STATUS LNLMSG_TYPE_EVENT Access Granted to Destination Floor Generated when a card was presented to a reader associated with an elevator terminal and the elevator cab assignment was performed. Used when elevator dispatching devices are present. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType sb_MessageTyp 5155 (0) (L_EVENTTYPE_GRANTED) (22) (L_GRANTED_DESTINATION_FLOOR) Panel ID Terminal ID EVENT_DATA_TYPE_CA LNLMSG_TYPE_EVENT Copyright 2013 Lenel Systems International, Inc. 73 Access Denied to Destination Floor Generated when a card was presented to a reader associated with an elevator terminal but the elevator assignment was not performed; used when elevator dispatching devices are present. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType sb_MessageTyp 5156 (1) (L_EVENTTYPE_DENIED) (66) (L_DENIED_DESTINATION_FLOOR) Panel ID Terminal ID EVENT_DATA_TYPE_CA LNLMSG_TYPE_EVENT Copyright 2013 Lenel Systems International, Inc. 74 Asset Events Asset Denied - Invalid Asset Event indicating that the asset was denied because of an invalid asset. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_AssetData.sl_AssetID su_EventData.us_AssetData.sl_CardNumber su_EventData.us_AssetData.sl_EventType su_EventData.us_AssetData.sl_EventID 754 5 (L_EVENTTYPE_ASSET) 0 (L_ASSET_INVALID_ASSET) Panel ID. Device ID. EVENT_DATA_ASSET Asset ID Card number Event type of cardholder transaction Event ID of cardholder transaction Asset Denied - Invalid Cardholder Event indicating that the asset was denied because of an invalid cardholder. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_AssetData.sl_AssetID su_EventData.us_AssetData.sl_CardNumber su_EventData.us_AssetData.sl_EventType su_EventData.us_AssetData.sl_EventID 755 5 (L_EVENTTYPE_ASSET) 1 (L_ASSET_INVALID_CARDHOLDER) Panel ID. Device ID. EVENT_DATA_ASSET Asset ID Card number Event type of cardholder transaction Event ID of cardholder transaction Asset Denied - Invalid Access Event indicating that the asset was denied because of an invalid access. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_AssetData.sl_AssetID Copyright 2013 Lenel Systems International, Inc. 756 5 (L_EVENTTYPE_ASSET) 2 (L_ASSET_INVALID_ACCESS) Panel ID. Device ID. EVENT_DATA_ASSET Asset ID 75 su_EventData.us_AssetData.sl_CardNumber Card number su_EventData.us_AssetData.sl_EventType Event type of the cardholder transaction su_EventData.us_AssetData.sl_EventID Event ID of the cardholder transaction Asset Denied - No Asset Privileges Event indicating that the asset was denied because of no asset privileges. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_AssetData.sl_AssetID su_EventData.us_AssetData.sl_CardNumber su_EventData.us_AssetData.sl_EventType su_EventData.us_AssetData.sl_EventID 757 5 (L_EVENTTYPE_ASSET) 3 (L_ASSET_INVALID_PRIVILEGES) Panel ID. Device ID. EVENT_DATA_ASSET Asset ID Card number Event type of the cardholder transaction Event ID of the cardholder transaction Asset Granted - Asset Owner Event indicating that the asset was granted based on asset owner. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_AssetData.sl_AssetID su_EventData.us_AssetData.sl_CardNumber su_EventData.us_AssetData.sl_EventType su_EventData.us_AssetData.sl_EventID 758 5 (L_EVENTTYPE_ASSET) 4 (L_ASSET_GRANTED_OWNER) Panel ID. Device ID. EVENT_DATA_ASSET Asset ID Card number Event type of the cardholder transaction Event ID of the cardholder transaction Asset Granted - Asset Privileges Only Event indicating that the asset was granted based on asset privileges only. ID sb_EventType sb_EventID ss_AccessPanelID Copyright 2013 Lenel Systems International, Inc. 759 5 (L_EVENTTYPE_ASSET) 5 (L_ASSET_GRANTED_PRIVILEGES_ONLY) Panel ID. 76 sb_DeviceID sb_EventDataType su_EventData.us_AssetData.sl_AssetID su_EventData.us_AssetData.sl_CardNumber su_EventData.us_AssetData.sl_EventType su_EventData.us_AssetData.sl_EventID Device ID. EVENT_DATA_ASSET Asset ID Card number Event type of the cardholder transaction Event ID of the cardholder transaction Asset Denied – Asset Disable Command Sent Event indicating that the asset disable command was sent because the asset was denied. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_AssetData.sl_AssetID su_EventData.us_AssetData.sl_CardNumber su_EventData.us_AssetData.sl_EventType su_EventData.us_AssetData.sl_EventID Copyright 2013 Lenel Systems International, Inc. 794 5 (L_EVENTTYPE_ASSET) 6 (L_ASSET_DISABLE_CMD_SENT) Panel ID. Device ID. EVENT_DATA_ASSET Asset ID Card number Event Type Event ID 77 Fire Events Fire Alarm In This event is used to indicate a fire alarm is active. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 220 7 (L_EVENTTYPE_FIRE) 200 (L_FIRE_FIRE_ALARM_IN) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Fire Alarm Out This event is used to indicate a fire alarm is no longer active. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 221 7 (L_EVENTTYPE_FIRE) 201 (L_FIRE_FIRE_ALARM_OUT) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Fire Alarm Acknowledge Indicates that a fire alarm has been acknowledged. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 222 7 (L_EVENTTYPE_FIRE) 202 (L_FIRE_FIRE_ALARM_ACK) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Fire Alarm Block Acknowledge Event used to indicate a group of fire alarms have been acknowledged. ID sb_EventType sb_EventID 223 7 (L_EVENTTYPE_FIRE) 203 (L_FIRE_FIRE_ALARM_BLOCK_ACK) Copyright 2013 Lenel Systems International, Inc. 78 ss_AccessPanelID Panel ID Supervisory In Event used to indicate a supervisory condition. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 224 7 (L_EVENTTYPE_FIRE) 204 (L_FIRE_SUPERVISORY_IN) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Supervisory Out Event used to indicate that a supervisory condition has been returned to the normal state. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 225 7 (L_EVENTTYPE_FIRE) 205 (L_FIRE_SUPERVISORY_OUT) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Supervisory Acknowledge Indicates that a supervisory condition has been acknowledged. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 226 7 (L_EVENTTYPE_FIRE) 206 (L_FIRE_SUPERVISORY_ACK) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Supervisory Block Acknowledge Event used to acknowledge a group of supervisory condition alarms. ID sb_EventType sb_EventID ss_AccessPanelID 227 7 (L_EVENTTYPE_FIRE) 207 (L_FIRE_SUPERVISORY_BLOCK_ACK) Panel ID Copyright 2013 Lenel Systems International, Inc. 79 Security Alarm In Event used to indicate a new security alarm. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 228 7 (L_EVENTTYPE_FIRE) 208 (L_FIRE_SECURITY_ALARM_IN) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Security Alarm Out Indicates that a security alarm is no longer active. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 229 7 (L_EVENTTYPE_FIRE) 209 (L_FIRE_SECURITY_ALARM_OUT) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Security Alarm Acknowledge Event used to indicate that a security alarm has been acknowledged. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 230 7 (L_EVENTTYPE_FIRE) 210 (L_FIRE_SECURITY_ALARM_BLOCK_ACK) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Security Alarm Block Acknowledge Event used to indicate that a group of security alarms have been acknowledged. ID sb_EventType sb_EventID ss_AccessPanelID 231 7 (L_EVENTTYPE_FIRE) 211 (L_FIRE_SECURITY_ALARM_BLOCK_ACK) Panel ID Copyright 2013 Lenel Systems International, Inc. 80 Audibles Silenced Indicates that the audibles have been silenced. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 232 7 (L_EVENTTYPE_FIRE) 212 (L_FIRE_AUDIBLES_SILENCED) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Audibles Unsilenced Indicates that the audibles have been unsilenced. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 233 7 (L_EVENTTYPE_FIRE) 213 (L_FIRE_AUDIBLES_UNSILENCED) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). System Reset Indicates that a system reset has been issued on the Fire Panel. ID sb_EventType sb_EventID ss_AccessPanelID 234 7 (L_EVENTTYPE_FIRE) 214 (L_FIRE_SYSTEM_RESET) Panel ID Status In Indicates that a status reporting device is active. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 235 7 (L_EVENTTYPE_FIRE) 215 (L_FIRE_STATUS_IN) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Copyright 2013 Lenel Systems International, Inc. 81 Status Out Indicates that a status reporting device has returned to the inactive state. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 236 7 (L_EVENTTYPE_FIRE) 216 (L_FIRE_STATUS_OUT) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Trouble Block Acknowledge Event used to indicate that a group of trouble alarms have been acknowledged. ID sb_EventType sb_EventID ss_AccessPanelID 237 7 (L_EVENTTYPE_FIRE) 217 (L_FIRE_TROUBLE_BLOCK_ACK) Panel ID Trouble In Event used to indicate a trouble alarm. This event can have a trouble code associated with it that will be passed as a parameter to the event. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam sl_EventParamValue sb_EventDataType 765 7 (L_EVENTTYPE_FIRE) 218 (L_FIRE_TROUBLE_IN) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Trouble ID to indicate the type of trouble. EVENT_DATA_TYPE_STATUS Trouble Out This event is used to indicate a trouble alarm has been restored. This event can have a trouble code associated with it that will be passed as a parameter to the event. ID sb_EventType 766 7 (L_EVENTTYPE_FIRE) Copyright 2013 Lenel Systems International, Inc. 82 sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam sl_EventParamValue sb_EventDataType 219 (L_FIRE_TROUBLE_OUT) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Trouble ID to indicate the type of trouble. EVENT_DATA_TYPE_STATUS Trouble Acknowledge This event is used to indicate a trouble alarm has been acknowledged. This event can have a trouble code associated with it that will be passed as a parameter to the event. ID 767 sb_EventType 7 (L_EVENTTYPE_FIRE) sb_EventID 220 (L_FIRE_TROUBLE_ACK) ss_AccessPanelID Panel ID sb_DeviceID Sub device ID (0 if event is for panel). sb_InputDevID Input device ID (0 if event is for sub device or panel). sb_EventParam Whether or not a parameter value is associated with this event (0- No, 1 – Yes). sl_EventParamValue Trouble ID to indicate the type of trouble. sb_EventDataType EVENT_DATA_TYPE_STATUS All Systems Normal Generated when the fire panel is booted up. This alarm may also be sent when all existing alarm conditions are resolved. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1526 7 (L_EVENTTYPE_FIRE) 256 (L_FIRE_ALL_SYSTEMS_NORMAL) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Fire Alarm Acknowledged Clear Generated when a fire alarm has been acknowledged and cleared. ID sb_EventType 1527 7 (L_EVENTTYPE_FIRE) Copyright 2013 Lenel Systems International, Inc. 83 sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 257 (L_FIRE_ALARM_ACKNOWLEDGED_CLEAR) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Trouble Acknowledged Clear A trouble condition that has been cleared has been acknowledged by the user. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1528 7 (L_EVENTTYPE_FIRE) 258 (L_FIRE_TROUBLE_ACKNOWLEDGED_CLEAR) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Walk Test Unprogrammed Generated when the reported device was part of a walk test and has been removed from the system (it is not longer configured in the system). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1529 7 (L_EVENTTYPE_FIRE) 259 (L_FIRE_WALK_TEST_UNPROGRAMMED) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Walk Test Uninstalled Generated when the reported device was part of a walk test and has been physically disconnected from the system. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1530 7 (L_EVENTTYPE_FIRE) 260 (L_FIRE_WALK_TEST_UNINSTALLED) Panel ID Sub device ID (0 if event is for panel). Copyright 2013 Lenel Systems International, Inc. 84 sb_InputDevID sb_EventParam Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Walk Test ## Generated when walk test ## is initiated. A walk test is used to test devices in the system and report devices addressed incorrectly. The device and the first zone programmed for this device are reported with each message. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1531 7 (L_EVENTTYPE_FIRE) 261 (L_FIRE_WALK_TEST_NUM) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Walk Test Untest Generated when the reported device is no longer being tested (part of a walk test). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1532 7 (L_EVENTTYPE_FIRE) 262 (L_FIRE_WALK_TEST_UNTEST) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Module Active Generated when a monitor or control module connected to the system becomes active. The device label assigned to this device and the zone label assigned to the first zone programmed for this device will be included with the event. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID 1533 7 (L_EVENTTYPE_FIRE) 263 (L_FIRE_MODULE_ACTIVE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Copyright 2013 Lenel Systems International, Inc. 85 sb_EventParam Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Module Clear Generated when a monitor or control module connected to the system is no longer active. The device label assigned to this device and the zone label assigned to the first zone programmed for this device will be included with the event. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1534 7 (L_EVENTTYPE_FIRE) 264 (L_FIRE_MODULE_CLEAR) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Signal Silence Generated when the alarm signal on the hardware has been silenced. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1535 7 (L_EVENTTYPE_FIRE) 265 (L_FIRE_SIGNAL_SILENCE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Detector Test Generated when the fire detection test is initiated. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1536 7 (L_EVENTTYPE_FIRE) 266 (L_FIRE_DETECTOR_TEST) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Copyright 2013 Lenel Systems International, Inc. 86 Detector Test OK Generated when the fire detection test is successfully completed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1537 7 (L_EVENTTYPE_FIRE) 267 (L_FIRE_DETECTOR_TEST_OK) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Detector Test Fail Generated when the fire detection test fails. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1538 7 (L_EVENTTYPE_FIRE) 268 (L_FIRE_DETECTOR_TEST_FAIL) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Lamp Test Activated Generated when the lamp test is activated. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1539 7 (L_EVENTTYPE_FIRE) 269 (L_FIRE_LAMP_TEST_ACTIVATED) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Lamp Test Complete Generated when the lamp test successfully completes. Copyright 2013 Lenel Systems International, Inc. 87 ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1540 7 (L_EVENTTYPE_FIRE) 270 (L_FIRE_LAMP_TEST_COMPLETE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Block Acknowledge Generated when a block acknowledge command is sent. This command acknowledges any existing unacknowledged alarms in the system all at once. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1541 7 (L_EVENTTYPE_FIRE) 271 (L_FIRE_BLOCK_ACKNOWLEDGE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Pre-Alarm An event indicating a pre-alarm condition is active. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1875 7 (L_EVENTTYPE_FIRE) 280 (L_FIRE_PRE_ALARM_IN) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Pre-Alarm Clear An event indicating a pre-alarm condition is no longer active. ID sb_EventType sb_EventID ss_AccessPanelID 1876 7 (L_EVENTTYPE_FIRE) 281 (L_FIRE_PRE_ALARM_OUT) Panel ID Copyright 2013 Lenel Systems International, Inc. 88 sb_DeviceID sb_InputDevID sb_EventParam Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Non-Fire Active An event indicating a non fire related alarm condition is active. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1877 7 (L_EVENTTYPE_FIRE) 282 (L_FIRE_NON_FIRE_ACTIVE) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Non-Fire Active Cleared An event indicating a non fire related alarm condition is no longer active. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_InputDevID sb_EventParam 1880 7 (L_EVENTTYPE_FIRE) 283 (L_FIRE_NON_FIRE_ACTIVE_CLEAR) Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). Whether or not a parameter value is associated with this event (0- No, 1 – Yes). Copyright 2013 Lenel Systems International, Inc. 89 Copyright 2013 Lenel Systems International, Inc. 90 Intercom Events Call to a Busy Subscriber Indicates that an intercom call has been placed to a busy subscriber. The calling intercom station is specified in sb_DeviceID and the Busy Subscriber is specified in the intercom data (sl_IntercomData). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_IntercomData.sl_IntercomData 760 10 (L_EVENTTYPE_INTERCOM) 1 (L_INTERCOM_CALL_TO_BUSY) Intercom Exchange ID. Intercom Station initiating call. EVENT_DATA_TYPE_INTERCOM Busy Subscriber call was placed to. Call to a Private Subscriber Indicates that an intercom call has been placed to a private subscriber. The calling intercom station is specified in sb_DeviceID and the Private Subscriber is specified in the intercom data (sl_IntercomData). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_IntercomData.sl_IntercomData 761 10 (L_EVENTTYPE_INTERCOM) 2 (L_INTERCOM_CALL_TO_PRIVATE) Intercom Exchange ID. Intercom Station initiating call. EVENT_DATA_TYPE_INTERCOM Private Subscriber call was placed to. Call to an Open Subscriber Indicates that an intercom call has been placed to an open subscriber. The calling intercom station is specified in sb_DeviceID and the Open Subscriber is specified in the intercom data (sl_IntercomData). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_IntercomData.sl_IntercomData Copyright 2013 Lenel Systems International, Inc. 762 10 (L_EVENTTYPE_INTERCOM) 3 (L_INTERCOM_CALL_TO_OPEN) Intercom Exchange ID. Intercom Station initiating call. EVENT_DATA_TYPE_INTERCOM Open Subscriber call was placed to. 91 Call Disconnected This event indicates that an intercom call has been disconnected. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_IntercomData. sl_IntercomData 763 10 (L_EVENTTYPE_INTERCOM) 4 (L_INTERCOM_CALL_DISCONNECTED) Intercom Exchange ID. Intercom Station that has been disconnected. EVENT_DATA_TYPE_INTERCOM Subscriber the call was placed to. Intercom Function This message indicates that an intercom function has been executed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventParam sl_EventParamValue 764 10 (L_EVENTTYPE_INTERCOM) 5 (L_INTERCOM_FUNCTION) Intercom Exchange ID. Intercom Station function was executed on. This is set to 1 to indicate that a parameter values is associated with this event. Intercom function that was executed. Incoming Call Indicates an incoming intercom call. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1554 10 (L_EVENTTYPE_INTERCOM) 6 (L_INTERCOM_INCOMING_CALL) Intercom Exchange ID. Intercom Station function. Trouble Report A trouble report for an intercom device. The details should be passed back in the associated text. ID sb_EventType sb_EventID 1555 10 (L_EVENTTYPE_INTERCOM) 7 (L_INTERCOM_TROUBLE_REPORT) Copyright 2013 Lenel Systems International, Inc. 92 ss_AccessPanelID sb_DeviceID Intercom Exchange ID. Intercom Station. Test Report A test report. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1556 10 (L_EVENTTYPE_INTERCOM) 8 (L_INTERCOM_TEST_REPORT) Intercom Exchange ID. Intercom Station. Ringing Indicates an intercom station is ringing. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1794 10 (L_EVENTTYPE_INTERCOM) 9 (L_INTERCOM_RINGING) Intercom Exchange ID. Intercom Station. Call Failed Indicates an intercom call has failed. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1795 10 (L_EVENTTYPE_INTERCOM) 10 (L_INTERCOM_CALL_FAILED) Intercom Exchange ID. Intercom Station function. Hold Indicates an intercom call has been placed on hold. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1796 10 (L_EVENTTYPE_INTERCOM) 11 (L_INTERCOM_HOLD) Intercom Exchange ID. Intercom Station. Copyright 2013 Lenel Systems International, Inc. 93 Retrieved Indicates an intercom call has been retrieved (answered). ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1797 10 (L_EVENTTYPE_INTERCOM) 12 (L_INTERCOM_RETRIEVED) Intercom Exchange ID. Intercom Station function. Initiated Indicates an intercom call has been initiated. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1798 10 (L_EVENTTYPE_INTERCOM) 13 (L_INTERCOM_INITIATED) Intercom Exchange ID. Intercom Station function. Call Ended Indicates an intercom call has been ended. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1891 10 (L_EVENTTYPE_INTERCOM) 14 (L_INTERCOM_CALL_ENDED) Intercom Exchange ID. Intercom Station. Call Established Indicates an intercom call has been established. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_IntercomData. sl_IntercomData 1892 10 (L_EVENTTYPE_INTERCOM) 15 (L_INTERCOM_CALL_ESTABLISHED) Intercom Exchange ID. Intercom Station. EVENT_DATA_TYPE_INTERCOM Subscriber the call was placed to. Copyright 2013 Lenel Systems International, Inc. 94 Unanswered Call Indicates an intercom call has not been answered. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1893 10 (L_EVENTTYPE_INTERCOM) 16 (L_INTERCOM_CALL_UNANSWERED) Intercom Exchange ID. Intercom Station. Call Transferred Indicates an intercom call has been transferred. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1894 10 (L_EVENTTYPE_INTERCOM) 17 (L_INTERCOM_CALL_TRANSFERRED) Intercom Exchange ID. Intercom Station. Call Conferenced Indicates an intercom call has been conferenced. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID 1895 10 (L_EVENTTYPE_INTERCOM) 18 (L_INTERCOM_CALL_CONFERENCED) Intercom Exchange ID. Intercom Station. Call Queued Indicates an intercom call has been queued. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_IntercomData. sl_IntercomData 1910 10 (L_EVENTTYPE_INTERCOM) 19 (L_INTERCOM_CALL_QUEUED) Intercom Exchange ID. Intercom Station. EVENT_DATA_TYPE_INTERCOM Queue receiver station. Copyright 2013 Lenel Systems International, Inc. 95 Intercom Exchange Failure Indicates an failure occurred for the intercom exchange. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventParam sl_EventParamValue 1915 10 (L_EVENTTYPE_INTERCOM) 20 (L_INTERCOM_INTERCOM_EXCHANGE_ERROR) Intercom Exchange ID. Intercom Station. This is set to 1 to indicate that a parameter value is associated with this event. Intercom error. Call Removed from Queue This event indicates that an intercom call has been removed from the queue. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_IntercomData. sl_IntercomData 2290 10 (L_EVENTTYPE_INTERCOM) 21 (L_INTERCOM_REMOVED_FROM_QUEUE) Intercom Exchange ID. Intercom Station. EVENT_DATA_TYPE_INTERCOM Queue receiver station. Copyright 2013 Lenel Systems International, Inc. 96 Copyright 2013 Lenel Systems International, Inc. 97 Video Events Motion Detected Event indicating motion has been detected on a given input channel (camera) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_DeviceType 777 11 (L_EVENTTYPE_VIDEO) 1 (L_VIDEO_MOTION_DETECTED) Panel ID Input Channel of the Camera L_DEVICETYPE_CCTVCAMERA Motion Detected Restored Event indicating motion has been restored (is no longer detected) on a given input channel (camera) ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_DeviceType 778 11 (L_EVENTTYPE_VIDEO) 2 (L_VIDEO_MOTION_DETECTED_RESTORED) Panel ID Input Channel of the Camera L_DEVICETYPE_CCTVCAMERA Video Event Threshold Reached Event used to indicate that the user defined event threshold has been reached. That is to say that the percent of disk space used by video events has been reached. This typically signals the Archive Server to start archiving or purging. ID sb_EventType sb_EventID ss_AccessPanelID 790 11 (L_EVENTTYPE_VIDEO) 3 (L_VIDEO_EVENTTHRESHOLD_REACHED) The ID of the Video Server (Panel ID) Video Server Disk Full Event used to indicate the user defined event threshold has exceeded 5% or more. That is to say that the percent of disk space used by video events has been reached and is now at least 5% above it. This typically signals the Archive Server to start archiving or purging. If a user defined Copyright 2013 Lenel Systems International, Inc. 98 Event Threshold has not been defined then this event should be sent when the Video Server disk space is 95% full of video events. ID sb_EventType sb_EventID ss_AccessPanelID 791 11 (L_EVENTTYPE_VIDEO) 4 (L_VIDEO_DISK_FULL) The ID of the Video Server (Panel ID) User Generated Video Event For Internal Use Only (L_VIDEO_USER_GENERATED) Archive Server Failure For Internal Use Only (L_VIDEO_ARCHIVESERVER_FAILURE) Video Server is not Recording Generated when it has been detected that the video recorder is no longer recording. ID sb_EventType sb_EventID ss_AccessPanelID 1525 11 (L_EVENTTYPE_VIDEO) 7 (L_VIDEO_RECORDING_STOPPED) The ID of the Video Server (Panel ID) Capture Source Mismatch Indicates that user-specified IP Camera type does not match actual IP Camera type. ID sb_EventType sb_EventID ss_AccessPanelID 1800 11 (L_EVENTTYPE_VIDEO) 8 (L_VIDEO_CAPTURE_SOURCE_MISMATCH) The ID of the Video Server (Panel ID) Camera Tamper Active Indicates that IP Camera configuration was changed bypassing the OnGuard software. (It is possible if the user knows password to access the IP Camera and connect to it directly using IP Camera provided Webinterface.) ID sb_EventType sb_EventID 1801 11 (L_EVENTTYPE_VIDEO) 9 (L_VIDEO_CAMERA_TAMPER) Copyright 2013 Lenel Systems International, Inc. 99 ss_AccessPanelID The ID of the Video Server (Panel ID) Camera Tamper Restored Previous camera tamper alarm has been restored. ID sb_EventType sb_EventID ss_AccessPanelID 1802 11 (L_EVENTTYPE_VIDEO) 10 (L_VIDEO_CAMERA_TAMPER_RETORE) The ID of the Video Server (Panel ID) Storage Failure Indicates that something is wrong related to recording/retrieving video to/from hard drives. ID sb_EventType sb_EventID ss_AccessPanelID 1803 11 (L_EVENTTYPE_VIDEO) 11 (L_VIDEO_STORAGE_FAILURE) The ID of the Video Server (Panel ID) Blind Camera Indicates that level of camera blindness (covered by some sort of obstacle) exceeded configured threshold ID sb_EventType sb_EventID ss_AccessPanelID 1878 11 (L_EVENTTYPE_VIDEO) 14 (L_VIDEO_BLIND_CAMERA_DETECTED) The ID of the Video Server (Panel ID) Blind Camera Restored Blind Camera alarm is restored. ID sb_EventType sb_EventID ss_AccessPanelID 1879 11 (L_EVENTTYPE_VIDEO) 15 (L_VIDEO_BLIND_CAMERA_DETECTED_RESTORED) The ID of the Video Server (Panel ID) Copyright 2013 Lenel Systems International, Inc. 100 Video Failover Started Generated when the camera is configured for failover and the secondary recorder determined that the primary recorder is not recording video from the camera, so secondary recorder starts recording from this camera. ID sb_EventType sb_EventID ss_AccessPanelID 1897 11 (L_EVENTTYPE_VIDEO) 16 (L_VIDEO_FAILOVER_STARTED) The ID of the Video Server (Panel ID) Video Failover Restored Generated when the camera is configured for failover and secondary recorder is currently recording video from the camera and secondary recorder determined that the primary recorder came back online and started recording video from the camera. Secondary recorder will stop recording video from the camera. ID sb_EventType sb_EventID ss_AccessPanelID 1898 11 (L_EVENTTYPE_VIDEO) 17 (L_VIDEO_FAILOVER_RESTORED) The ID of the Video Server (Panel ID) Video Failover Failed Generated when the camera is configured for failover and failover cannot be activated on this camera. ID sb_EventType sb_EventID ss_AccessPanelID 1899 11 (L_EVENTTYPE_VIDEO) 18 (L_VIDEO_FAILOVER_FAILED) The ID of the Video Server (Panel ID) Video Overflow Started Generated when the recorder determined that it cannot handle incoming video. Usually it happens when hard drive or CPU utilization is close to 100%, so recorder cannot keep up with amount of video. ID sb_EventType sb_EventID ss_AccessPanelID 1900 11 (L_EVENTTYPE_VIDEO) 19 (L_VIDEO_OVERFLOW_STARTED) The ID of the Video Server (Panel ID) Copyright 2013 Lenel Systems International, Inc. 101 Video Overflow Restored Generated when the recorder is no longer having trouble handling incoming video. ID sb_EventType sb_EventID ss_AccessPanelID 1901 11 (L_EVENTTYPE_VIDEO) 20 (L_VIDEO_OVERFLOW_RESTORED) The ID of the Video Server (Panel ID) Video Storage Unavailable Generated when the recorder cannot record video to a drive. ID sb_EventType sb_EventID ss_AccessPanelID 1902 11 (L_EVENTTYPE_VIDEO) 21 (L_VIDEO_STORAGE_UNAVAILABLE) The ID of the Video Server (Panel ID) IVS Connection Lost Generated when the camera is configured to analyze video on a remote IntelligentVideo Server and connection to the IntelligentVideo Server is lost. ID sb_EventType sb_EventID ss_AccessPanelID 1903 11 (L_EVENTTYPE_VIDEO) 22 (L_VIDEO_IVS_CONNECTION_LOST) The ID of the Video Server (Panel ID) IVS Connection Restored Generated when the connection to the IntelligentVideo Server was lost and has been restored. ID sb_EventType sb_EventID ss_AccessPanelID 1904 11 (L_EVENTTYPE_VIDEO) 23 (L_VIDEO_IVS_CONNECTION_RESTORED) The ID of the Video Server (Panel ID) IVS Engine Connection Lost Generated when the IntelligentVideo Server looses connection to the LpsSearchSvc service and video processing of all channels fails. ID 1906 Copyright 2013 Lenel Systems International, Inc. 102 sb_EventType sb_EventID ss_AccessPanelID 11 (L_EVENTTYPE_VIDEO) 24 (L_VIDEO_IVS_ENGINE_CONNECTION_LOST) The ID of the Video Server (Panel ID) IVS Engine Connection Restored Generated when the IntelligentVideo Server reconnects to the LpsSearchSvc service after the connection has been lost. ID sb_EventType sb_EventID ss_AccessPanelID 1907 11 (L_EVENTTYPE_VIDEO) 25 (L_VIDEO_IVS_ENGINE_CONNECTION_RESTORED) The ID of the Video Server (Panel ID) IVS Channel Processing Failed Generated by the IntelligentVideo Server when video processing is terminated due to an error or lost connection. ID sb_EventType sb_EventID ss_AccessPanelID 1908 11 (L_EVENTTYPE_VIDEO) 26 (L_VIDEO_IVS_CHANNEL_PROCESSING_FAILED) The ID of the Video Server (Panel ID) IVS Channel Processing Restarted Generated when the IntelligentVideo Server re-establishes a connection to a channel that previously reported failure. ID sb_EventType sb_EventID ss_AccessPanelID 1909 11 (L_EVENTTYPE_VIDEO) 27 (L_VIDEO_IVS_CHANNEL_PROCESSING_RESTARTED) The ID of the Video Server (Panel ID) Time Out-Of-Sync Generated when the time stamp feature is enabled and the time on the camera has a difference of 20 seconds or more from the video recorder time. ID sb_EventType sb_EventID ss_AccessPanelID 1918 11 (L_EVENTTYPE_VIDEO) 30 (L_VIDEO_TIME_OUT_OF_SYNC) The ID of the Video Server (Panel ID) Copyright 2013 Lenel Systems International, Inc. 103 Time Out-Of-Sync Restored Generated when the time difference between the camera and video recorder returns to less than 20 seconds. ID sb_EventType sb_EventID ss_AccessPanelID 1919 11 (L_EVENTTYPE_VIDEO) 31 (L_VIDEO_TIME_OUT_OF_SYNC_RESTORED) The ID of the Video Server (Panel ID) In-Camera-Memory Download Failed ??? ID sb_EventType sb_EventID ss_AccessPanelID 1929 11 (L_EVENTTYPE_VIDEO) 35 (L_VIDEO_CAM_MEM_DOWNLOAD_FAILED) The ID of the Video Server (Panel ID) In-Camera-Memory Download Restored ??? ID sb_EventType sb_EventID ss_AccessPanelID 1930 11 (L_EVENTTYPE_VIDEO) 36 (L_VIDEO_CAM_MEM_DOWNLOAD_RESTORED) The ID of the Video Server (Panel ID) In-Camera-Memory Download Started ??? ID sb_EventType sb_EventID ss_AccessPanelID 1931 11 (L_EVENTTYPE_VIDEO) 37 (L_VIDEO_CAM_MEM_DOWNLOAD_STARTED) The ID of the Video Server (Panel ID) In-Camera-Memory Download Completed ??? ID sb_EventType 1932 11 (L_EVENTTYPE_VIDEO) Copyright 2013 Lenel Systems International, Inc. 104 sb_EventID ss_AccessPanelID 38 (L_VIDEO_CAM_MEM_DOWNLOAD_COMPLETED) The ID of the Video Server (Panel ID) Firmware Download Started ??? ID sb_EventType sb_EventID ss_AccessPanelID 1933 11 (L_EVENTTYPE_VIDEO) 39 (L_VIDEO_FIRMWARE_DOWNLOAD_STARTED) The ID of the Video Server (Panel ID) Firmware Download Completed ??? ID sb_EventType sb_EventID ss_AccessPanelID 1934 11 (L_EVENTTYPE_VIDEO) 40 (L_VIDEO_FIRMWARE_DOWNLOAD_COMPLETED) The ID of the Video Server (Panel ID) Firmware Download Failed ??? ID sb_EventType sb_EventID ss_AccessPanelID 1935 11 (L_EVENTTYPE_VIDEO) 41 (L_VIDEO_FIRMWARE_DOWNLOAD_FAILED) The ID of the Video Server (Panel ID) Video Source Signal Lost ??? ID sb_EventType sb_EventID ss_AccessPanelID 1946 11 (L_EVENTTYPE_VIDEO) 42 (L_VIDEO_SOURCE_SIGNAL_LOST) The ID of the Video Server (Panel ID) Video Source Signal Restored ??? Copyright 2013 Lenel Systems International, Inc. 105 ID sb_EventType sb_EventID ss_AccessPanelID 1947 11 (L_EVENTTYPE_VIDEO) 43 (L_VIDEO_SOURCE_SIGNAL_RESTORED) The ID of the Video Server (Panel ID) CPU Utilization Threshold Exceeded ??? ID sb_EventType sb_EventID ss_AccessPanelID 1948 11 (L_EVENTTYPE_VIDEO) 44 (L_RECORDER_CPU_THRESHOLD_EXCEEDED) The ID of the Video Server (Panel ID) CPU Utilization Threshold Restored ??? ID sb_EventType sb_EventID ss_AccessPanelID 1949 11 (L_EVENTTYPE_VIDEO) 45 (L_RECORDER_CPU_THRESHOLD_RESTORED) The ID of the Video Server (Panel ID) Network Utilization Threshold Exceeded ??? ID sb_EventType sb_EventID ss_AccessPanelID 1950 11 (L_EVENTTYPE_VIDEO) 46 (L_RECORDER_NETWORK_THRESHOLD_EXCEEDED) The ID of the Video Server (Panel ID) Network Utilization Threshold Restored ??? ID sb_EventType sb_EventID ss_AccessPanelID 1951 11 (L_EVENTTYPE_VIDEO) 47 (L_RECORDER_NETWORK_THRESHOLD_RESTORED) The ID of the Video Server (Panel ID) Copyright 2013 Lenel Systems International, Inc. 106 Disk Read Utilization Threshold Exceeded ??? ID sb_EventType sb_EventID ss_AccessPanelID 1952 11 (L_EVENTTYPE_VIDEO) 48 (L_RECORDER_DISK_READ_THRESHOLD_EXCEEDED) The ID of the Video Server (Panel ID) Disk Read Utilization Threshold Restored ??? ID sb_EventType sb_EventID ss_AccessPanelID 1953 11 (L_EVENTTYPE_VIDEO) 49 (L_RECORDER_DISK_READ_THRESHOLD_RESTORED) The ID of the Video Server (Panel ID) Disk Write Utilization Threshold Exceeded ??? ID sb_EventType sb_EventID ss_AccessPanelID 1954 11 (L_EVENTTYPE_VIDEO) 50 (L_RECORDER_DISK_WRITE_THRESHOLD_EXCEEDED) The ID of the Video Server (Panel ID) Disk Write Utilization Threshold Restored ??? ID sb_EventType sb_EventID ss_AccessPanelID 1955 11 (L_EVENTTYPE_VIDEO) 51 (L_RECORDER_DISK_WRITE_THRESHOLD_RESTORED) The ID of the Video Server (Panel ID) Warning: Unable to Achieve Current Required Storage Setting ??? ID sb_EventType 1956 11 (L_EVENTTYPE_VIDEO) Copyright 2013 Lenel Systems International, Inc. 107 sb_EventID ss_AccessPanelID 52 (L_RECORDER_STORAGE_SHORTAGE) The ID of the Video Server (Panel ID) Update: Now able to Achieve Current Required Storage Setting ??? ID sb_EventType sb_EventID ss_AccessPanelID 1957 11 (L_EVENTTYPE_VIDEO) 53 (L_RECORDER_STORAGE_SHORTAGE_RESTORED) The ID of the Video Server (Panel ID) Warning: Unable to Meet Required Storage Setting! Deleting Oldest Video ??? ID sb_EventType sb_EventID ss_AccessPanelID 1958 11 (L_EVENTTYPE_VIDEO) 54 (L_RECORDER_STORAGE_FILE_DELETED) The ID of the Video Server (Panel ID) Insufficient Frame Rate Detected Generated when the IntelligentVideo engine does not receive a sufficient frame rate for the events configured on the video channel. ID sb_EventType sb_EventID ss_AccessPanelID 1965 11 (L_EVENTTYPE_VIDEO) 55 (L_VIDEO_INSUFFICIENT_FRAME_RATE_DETECTED) The ID of the Video Server (Panel ID) Poor Video Visibility Detected Generated when indefinite edges are present in the video image likely caused by environmental factors such as fog or glare. ID sb_EventType sb_EventID ss_AccessPanelID 1966 11 (L_EVENTTYPE_VIDEO) 56 (L_VIDEO_POOR_VISIBILITY_DETECTED) The ID of the Video Server (Panel ID) Copyright 2013 Lenel Systems International, Inc. 108 Background Map Not Found Generated when the engine cannot detect the background stickers. This may be caused when there is poor contrast or the stickers are improperly shaped/separated. ID sb_EventType sb_EventID ss_AccessPanelID 1967 11 (L_EVENTTYPE_VIDEO) 57 (L_VIDEO_BACKGROUND_MAP_NOT_FOUND) The ID of the Video Server (Panel ID) Insufficient Frame Rate Restored Generated when the frame rate reaches a value sufficient for the events configured on the video channel. ID sb_EventType sb_EventID ss_AccessPanelID 1979 11 (L_EVENTTYPE_VIDEO) 58 (L_VIDEO_INSUFFICIENT_FRAME_RATE_RESTORED) The ID of the Video Server (Panel ID) Poor Video Visibility Restored Generated when the video quality returns to an acceptable level. ID sb_EventType sb_EventID ss_AccessPanelID 1980 11 (L_EVENTTYPE_VIDEO) 59 (L_VIDEO_POOR_VISIBILITY_RESTORED) The ID of the Video Server (Panel ID) Background Map Found Generated when background stickers are detected. ID sb_EventType sb_EventID ss_AccessPanelID 1981 11 (L_EVENTTYPE_VIDEO) 60 (L_VIDEO_BACKGROUND_MAP_FOUND) The ID of the Video Server (Panel ID) Copyright 2013 Lenel Systems International, Inc. 109 Copyright 2013 Lenel Systems International, Inc. 110 Transmitter Events Transmitter Tamper Event to indicate a tamper alarm for a transmitter. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam 770 12 (L_EVENTTYPE_TRANSMITTER) 1 (L_TRANSMITTER_TAMPER) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Low Battery Event to indicate a low battery condition for a transmitter. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam 771 12 (L_EVENTTYPE_TRANSMITTER) 2 (L_TRANSMITTER_LOWBATTERY) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Alarm Event that indicates an alarm condition for a transmitter. Copyright 2013 Lenel Systems International, Inc. 111 ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam 772 12 (L_EVENTTYPE_TRANSMITTER) 3 (L_TRANSMITTER_ALARM) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Tamper Restored Used to indicate that a transmitter tamper alarm has been restored. ID sb_EventType sb_EventID 773 12 (L_EVENTTYPE_TRANSMITTER) 4 (L_TRANSMITTER_TAMPER_RESTOR E) ss_AccessPanelID Panel ID. sb_DeviceID Receiver ID that received transmitter signal. sl_TransmitterID Transmitter ID. sb_EventParam Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Low Battery Restored Event used to indicate that a transmitter low battery alarm has been restored. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 774 12 (L_EVENTTYPE_TRANSMITTER) 5 112 (L_TRANSMITTER_LOWBAT_RESTOR E) ss_AccessPanelID Panel ID. sb_DeviceID Receiver ID that received transmitter signal. sl_TransmitterID Transmitter ID. sb_EventParam Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Tilt Used to indicate a transmitter tilt alarm for transmitters that support this functionality like mandown transmitters. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam 779 12 (L_EVENTTYPE_TRANSMITTER) 6 (L_TRANSMITTER_TILT) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Tilt Restored Event that indicates that a transmitter tilt condition has been restored. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 780 12 (L_EVENTTYPE_TRANSMITTER) 7 (L_TRANSMITTER_TILT_RESTORE) Panel ID. Receiver ID that received transmitter signal. 113 sl_TransmitterID sb_EventParam Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Tilt Enabled Event that indicates that the tilt control for a transmitter is enabled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam 781 12 (L_EVENTTYPE_TRANSMITTER) 8 (L_TRANSMITTER_TILT_ENABLE) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Tilt Disabled Indicates that the tilt control for a transmitter is disabled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam Copyright 2013 Lenel Systems International, Inc. 782 12 (L_EVENTTYPE_TRANSMITTER) 9 (L_TRANSMITTER_TILT_DISABLE) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. 114 sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Pull Cord Alarm Event that signals a transmitter pull cord alarm. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam 783 12 (L_EVENTTYPE_TRANSMITTER) 10 (L_TRANSMITTER_PULLCORD) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Pull Cord Restored Indicates that the transmitter pull cord alarm has been restored. ID sb_EventType sb_EventID 784 12 (L_EVENTTYPE_TRANSMITTER) 11 (L_TRANSMITTER_PULLCORD_REST ORE) ss_AccessPanelID Panel ID. sb_DeviceID Receiver ID that received transmitter signal. sl_TransmitterID Transmitter ID. sb_EventParam Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Copyright 2013 Lenel Systems International, Inc. 115 Transmitter Pre-Tilt Event that indicates a transmitter pre-tilt condition. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sl_TransmitterID sb_EventParam 785 12 (L_EVENTTYPE_TRANSMITTER) 12 (L_TRANSMITTER_PRE_TILT) Panel ID. Receiver ID that received transmitter signal. Transmitter ID. Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Pre-Tilt Restored Event that is used to indicate that the transmitter pre-tilt condition has been restored. ID sb_EventType sb_EventID 786 12 (L_EVENTTYPE_TRANSMITTER) 13 (L_TRANSMITTER_PRE_TILT_RESTOR E) ss_AccessPanelID Panel ID. sb_DeviceID Receiver ID that received transmitter signal. sl_TransmitterID Transmitter ID. sb_EventParam Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Temporary Tilt Disable Event to indicate that the tilt has temporarily been disabled on the transmitter. Copyright 2013 Lenel Systems International, Inc. 116 ID sb_EventType sb_EventID 787 12 (L_EVENTTYPE_TRANSMITTER) 14 (L_TRANSMITTER_TEMPTILT_DISABL E) ss_AccessPanelID Panel ID. sb_DeviceID Receiver ID that received transmitter signal. sl_TransmitterID Transmitter ID. sb_EventParam Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Alarm Restored Event used to indicate that a transmitter alarm has been restored. ID sb_EventType sb_EventID 788 12 (L_EVENTTYPE_TRANSMITTER) 15 (L_TRANSMITTER_ALARM_RESTORE) ss_AccessPanelID Panel ID. sb_DeviceID Receiver ID that received transmitter signal. sl_TransmitterID Transmitter ID. sb_EventParam Can be used to indicate if the transmitter message is one that is verified (IR signal received by an RF receiver). To use set this value to 1 and also fill in the sl_EventParamValue. sl_EventParamValue 1 – Verified Alarm (if sb_EventParam = 1) sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Inactivity Event used to indicate that a transmitter that was supposed to generate a supervision message failed to do so. ID sb_EventType Copyright 2013 Lenel Systems International, Inc. 789 12 (L_EVENTTYPE_TRANSMITTER) 117 sb_EventID 16 (L_TRANSMITTER_NO_SUPERVISION) ss_AccessPanelID Panel ID. sl_TransmitterID Transmitter ID. sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Touch Alarm An event generated by a transmitter when the item it is protecting is touched. ID sb_EventType sb_EventID 1885 12 (L_EVENTTYPE_TRANSMITTER) 17 (L_TRANSMITTER_TOUCH_ALARM) ss_AccessPanelID Panel ID. sl_TransmitterID Transmitter ID. sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Removal Alarm An event generated by a transmitter when the item it is protecting is removed. ID sb_EventType sb_EventID 1886 12 (L_EVENTTYPE_TRANSMITTER) 18 (L_TRANSMITTER_REMOVAL_ALARM) ss_AccessPanelID Panel ID. sl_TransmitterID Transmitter ID. sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter Acknowledge This event is reported when an alarm generated by a transmitter has been acknowledged. ID sb_EventType sb_EventID ss_AccessPanelID sl_TransmitterID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1982 12 (L_EVENTTYPE_TRANSMITTER) 19 (L_TRANSMITTER_ACKNOWLEDGE) Panel ID. Transmitter ID. EVENT_DATA_TYPE_TRANSMITTER 118 su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Transmitter No Response This event is reported when an alarm generated by a transmitter has not been acknowledged. ID sb_EventType sb_EventID 1983 12 (L_EVENTTYPE_TRANSMITTER) 20 (L_TRANSMITTER_NO_RESPONSE) ss_AccessPanelID Panel ID. sl_TransmitterID Transmitter ID. sb_EventDataType EVENT_DATA_TYPE_TRANSMITTER su_EventData.us_TransmitterData.TransmitterID Base ID of the transmitter. Copyright 2013 Lenel Systems International, Inc. 119 Copyright 2013 Lenel Systems International, Inc. 120 Biometric Events Accepted Biometric Score Event that is used to indicate the score that was generated for a good biometric verification. ID 839 sb_EventType 18 (L_EVENTTYPE_BIOMETRIC) sb_EventID 0 (L_BIOMETRIC_ACCEPTED) ss_AccessPanelID Panel ID sb_DeviceID Device ID (Reader) sb_EventDataType EVENT_DATA_TYPE_CA su_EventData.us_DataCA.sl_CardNumber Card Number su_EventData.us_DataCA.sl_IssueCode Issue Code (-1 if not used) su_EventData.us_DataCA.sl_BioScore Biometric score Rejected Biometric Score Event that is used to indicate the score that was generated for a bad biometric verification. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode su_EventData.us_DataCA.sl_BioScore 840 18 (L_EVENTTYPE_BIOMETRIC) 1 (L_BIOMETRIC_REJECTED) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) Biometric score No Biometric Template Data Indicates that the biometric template was not found. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType su_EventData.us_DataCA.sl_CardNumber su_EventData.us_DataCA.sl_IssueCode Copyright 2013 Lenel Systems International, Inc. 841 18 (L_EVENTTYPE_BIOMETRIC) 2 (L_BIOMETRIC_TEMPLATE_NOT_FOUND) Panel ID Device ID (Reader) EVENT_DATA_TYPE_CA Card Number Issue Code (-1 if not used) 121 Muster Events Muster Mode Start Event used to indicate that muster mode has started. ID sb_EventType sb_EventID 1500 29 (L_EVENTTYPE_MUSTER) 0 (L_MUSTER_MUSTER_MODE_START) sl_SegmentID Segment ID sb_EventDataType EVENT_DATA_TYPE_AREAAPB su_EventData.us_AreaAPBData.sl_AreaAPBID Area ID Muster Mode Reset ID sb_EventType sb_EventID sl_SegmentID sb_EventDataType su_EventData.us_AreaAPBData.sl_AreaAPBID Copyright 2013 Lenel Systems International, Inc. 1501 29 (L_EVENTTYPE_MUSTER) 1 (L_MUSTER_MUSTER_MODE_RESET) Segment ID EVENT_DATA_TYPE_AREAAPB Area ID 122 Generic Events Generic Event Used to indicate that a generic event has been received. The alarm description will be the first line of the associated event text. ID sb_EventType sb_EventID 1799 30 (L_EVENTTYPE_GENERIC) 0 (L_GENERIC_GENERIC_EVENT) Input Alarmed Generic event for Input Alarmed state. ID sb_EventType sb_EventID 1808 30 (L_EVENTTYPE_GENERIC) 1 (L_GENERIC_INPUT_ALARMED) Input Normal Generic event for Input Normal state. ID sb_EventType sb_EventID 1809 30 (L_EVENTTYPE_GENERIC) 2 (L_GENERIC_INPUT_NORMAL) Input Low Low Generic event for Input Low Low state. ID sb_EventType sb_EventID 1810 30 (L_EVENTTYPE_GENERIC) 3 (L_GENERIC_INPUT_LOW_LOW) Input Low Generic event for Input Low state. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1811 30 (L_EVENTTYPE_GENERIC) 4 (L_GENERIC_INPUT_LOW) 123 Input High Generic event for Input High state. ID sb_EventType sb_EventID 1812 30 (L_EVENTTYPE_GENERIC) 5 (L_GENERIC_INPUT_HIGH) Input High High Generic event for Input High High state. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1813 30 (L_EVENTTYPE_GENERIC) 6 (L_GENERIC_INPUT_HIGH_HIGH) 124 Point Of Sale Events Item Sold Indicates an item was sold. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1824 31 (L_EVENTTYPE_POS) 0 (L_POS_ITEM_SOLD) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Cash Amount Tendered Generated when an event is used to indicate that a cash amount has been tendered. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1825 31 (L_EVENTTYPE_POS) 1 (L_POS_CASH_AMOUNT_TENDERED) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Credit Card Tendered Generated when a credit card was used as tender. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1826 31 (L_EVENTTYPE_POS) 2 (L_POS_CREDIT_CARD_TENDERED) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Cash or Safe Drop Generated when a transaction indicating a cash or safe drop has occurred. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1827 31 (L_EVENTTYPE_POS) 3 (L_POS_CASH_OR_SAFE_DROP) 125 ss_AccessPanelID sb_DeviceID sb_EventDataType ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Charge Account Tender Generated when a charge account was used as tender. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1828 31 (L_EVENTTYPE_POS) 4 (L_POS_CHARGE_ACCOUNT_TENDER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Change Due Generated when a transaction indicating the change due has occurred. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1829 31 (L_EVENTTYPE_POS) 5 (L_POS_CHANGE_DUE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Check Tender Generated when a check was used as tender. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1830 31 (L_EVENTTYPE_POS) 6 (L_POS_CHECK_TENDER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Clerk Name or Number A transaction that reports the clerk’s name or number. ID sb_EventType Copyright 2013 Lenel Systems International, Inc. 1831 31 (L_EVENTTYPE_POS) 126 sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 7 (L_POS_CLERK_NAME_OR_NUMBER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Manufacturer Coupon Indicates a manufacturer coupons. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1832 31 (L_EVENTTYPE_POS) 8 (L_POS_MANUFACTURER_COUPON) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Store Coupon Indicates a store coupon. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1833 31 (L_EVENTTYPE_POS) 9 (L_POS_STORE_COUPON) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Cancel Entire Sale Generated when a transaction is used to indicate that an entire sale was cancelled. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1834 31 (L_EVENTTYPE_POS) 10 (L_POS_CANCEL_ENTIRE_SALE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Debit, ATM, Check Card Tender Transaction that indicated that a debit, ATM, or check card was used as tender. ID Copyright 2013 Lenel Systems International, Inc. 1835 127 sb_EventType sb_EventID 31 (L_EVENTTYPE_POS) 11 (L_POS_DEBIT_ATM_CHECK_CARD_TENDER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS ss_AccessPanelID sb_DeviceID sb_EventDataType Discount Entered as Absolute Amount Generated when a discount was entered as an absolute amount. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1836 31 (L_EVENTTYPE_POS) 12 (L_POS_DISCOUNT_ENTERED_AS_ABSOLUTE_AMOUNT) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Deposit Amount Paid Pending Purchase Event indicating that a deposit amount paid pending purchase has occurred. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1837 31 (L_EVENTTYPE_POS) 13 (L_POS_DEPOSIT_AMOUNT_PAID_PENDING_PURCHASE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Deposit Return Transaction for a deposit return. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1838 31 (L_EVENTTYPE_POS) 14 (L_POS_DEPOSIT_RETURN) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS 128 Discount Entered as Percentage Generated when a discount was entered as a percentage. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1839 31 (L_EVENTTYPE_POS) 15 (L_POS_DISCOUNT_ENTERED_AS_PERCENTAGE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Employee Sign On Generated when an employee signs on. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1840 31 (L_EVENTTYPE_POS) 16 (L_POS_EMPLOYEE_SIGN_ON_TO_REGISTER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Employee Sign Off Generated when an employee signs off. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1841 31 (L_EVENTTYPE_POS) 17 (L_POS_EMPLOYEE_SIGN_OFF_OF_REGISTER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Complimentary Tender Generated when the tender was complimentary. ID sb_EventType sb_EventID Copyright 2013 Lenel Systems International, Inc. 1842 31 (L_EVENTTYPE_POS) 18 (L_POS_COMPLIMENTARY_TENDER) 129 ss_AccessPanelID sb_DeviceID sb_EventDataType ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Foodstamps Tender Indicates that food stamps were used as tender. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1843 31 (L_EVENTTYPE_POS) 19 (L_POS_FOODSTAMPS_WIC_ETC_TENDER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Gasoline Prepayment Transaction for a gasoline prepayment. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1844 31 (L_EVENTTYPE_POS) 20 (L_POS_GASOLINE_PREPAYMENT) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Gasoline Prepayment Refund Transaction for a gasoline prepayment refund. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1845 31 (L_EVENTTYPE_POS) 21 (L_POS_GASOLINE_PREPAYMENT_REFUND) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Information Message Used to report information messages. Copyright 2013 Lenel Systems International, Inc. 130 ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1846 31 (L_EVENTTYPE_POS) 22 (L_POS_INFORMATION_MESSAGE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Lottery Pay Out Generated when a lottery pay out has occurred. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1847 31 (L_EVENTTYPE_POS) 23 (L_POS_LOTTERY_PAY_OUT) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Lottery Sale Generated when an event for a lottery sale has occurred. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1848 31 (L_EVENTTYPE_POS) 24 (L_POS_LOTTERY_SALE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Manufacturer Coupon Redemption Transaction generated for a manufacturer coupon redemption. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1849 31 (L_EVENTTYPE_POS) 25 (L_POS_MANUFACTURER_COUPON_REDEMPTION) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS 131 Miscellaneous Tender Generated when miscellaneous tender is used. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1850 31 (L_EVENTTYPE_POS) 26 (L_POS_MISCELLANEOUS_TENDER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Quantity or Weight An event indicating a quantity or weight. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1851 31 (L_EVENTTYPE_POS) 27 (L_POS_QUANTITY_OR_WEIGHT) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS No Sale Transaction generated for a no sale. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1852 31 (L_EVENTTYPE_POS) 28 (L_POS_NO_SALE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Negative Tax Generated when negative tax is used. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1853 31 (L_EVENTTYPE_POS) 29 (L_POS_NEGATIVE_TAX) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS 132 Override Preprogrammed Price Generated when the preprogrammed price is overridden. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1854 31 (L_EVENTTYPE_POS) 30 (L_POS_OVERRIDE_PREPROGRAMMED_PRICE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Pick Up Transaction indicating a pick up has occurred. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1855 31 (L_EVENTTYPE_POS) 31 (L_POS_PICK_UP) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Price Lookup Generated when a price lookup has taken place. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1856 32 (L_EVENTTYPE_POS) 28 (L_POS_PRICE_LOOKUP) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Pay Out Generated when a payout takes place. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID Copyright 2013 Lenel Systems International, Inc. 1857 31 (L_EVENTTYPE_POS) 33 (L_POS_PAY_OUT) ID of Point of sale controller. ID of register or point of sale device. 133 sb_EventDataType EVENT_DATA_TYPE_STATUS Payment Toward Charge Account Balance Generated when a payment toward an account balance. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1858 31 (L_EVENTTYPE_POS) 34 (L_POS_PAYMENT_TOWARD_CHARGE_ACC_BALANCE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Payment of Refund to Customer Generated when a payment or refund is given to a customer. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1859 31 (L_EVENTTYPE_POS) 35 (L_POS_PAYMENT_OF_REFUND_TO_CUSTOMER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Merchandise Returned Generated when merchandise is returned. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1860 31 (L_EVENTTYPE_POS) 36 (L_POS_MERCHANDISE_RETURNED) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Sale Subtotal A transaction that reports the sale subtotal. ID sb_EventType Copyright 2013 Lenel Systems International, Inc. 1861 31 (L_EVENTTYPE_POS) 134 sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 37 (L_POS_SALE_SUBTOTAL) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Taxable Subtotal Transaction that reports the taxable subtotal. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1862 31 (L_EVENTTYPE_POS) 38 (L_POS_TAXABLE_SUBTOTAL) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Current Time An event that reports the current time. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1863 31 (L_EVENTTYPE_POS) 39 (L_POS_CURRENT_TIME) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Transaction Number Event Generated that indicates the transaction number of the sales transaction. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1864 31 (L_EVENTTYPE_POS) 40 (L_POS_TRANSACTION_NUMBER) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Negative Total Generated when there is a negative total. ID Copyright 2013 Lenel Systems International, Inc. 1865 135 sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 31 (L_EVENTTYPE_POS) 41 (L_POS_NEGATIVE_TOTAL) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Total Amount Due Transaction indicating the total amount due. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1866 31 (L_EVENTTYPE_POS) 42 (L_POS_TOTAL_AMOUNT_DUE) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Tax Amount Event that indicates the tax amount. ID Sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1867 31 (L_EVENTTYPE_POS) 43 (L_POS_TAX_AMOUNT) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Value Added Event that indicates value added. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1868 31 (L_EVENTTYPE_POS) 44 (L_POS_VALUE_ADDED) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Item Correct of Previously Entered Item Generated to indicate that an item was corrected. Copyright 2013 Lenel Systems International, Inc. 136 ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1869 31 (L_EVENTTYPE_POS) 45 (L_POS_ITEM_CORRECT_OF_PREV_ENTERED_ITEM) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Void or Error Correction Transaction that indicates a void or error correction. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1870 31 (L_EVENTTYPE_POS) 46 (L_POS_VOID_OR_ERROR_CORRECTION) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Register X Report Indicates a X report was generated. X reports are financial, end of day, clerk, etc.reports. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType 1871 31 (L_EVENTTYPE_POS) 47 (L_POS_REGISTER_X_REPORT) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS Register Z Report Indicates a Z report was generated. Z reports are the same as X reports, but resets totals to zero. ID sb_EventType sb_EventID ss_AccessPanelID sb_DeviceID sb_EventDataType Copyright 2013 Lenel Systems International, Inc. 1872 31 (L_EVENTTYPE_POS) 48 (L_POS_REGISTER_Y_REPORT) ID of Point of sale controller. ID of register or point of sale device. EVENT_DATA_TYPE_STATUS 137 Status Messages Status Messages are used to send status information back to the clients and do not get saved to the database. Status Messages do not use the sb_EventType and sb_EventID fields of the LNLMESSAGE structure but do set the sb_MessageType. sb_MessageType ss_AccessPanelID sb_DeviceID sb_InputDevID LNLMSG_TYPE_STATUS Panel ID Sub device ID (0 if event is for panel). Input device ID (0 if event is for sub device or panel). sb_EventDataType EVENT_DATA_TYPE_STATUSREQUEST su_EventData.us_StatusRequest.sl_StatusType Type of status (See the IDistributeEvent documentation for additional information on the DATA_STATUSREQUEST structure and the various status types). su_EventData.us_StatusRequest.sl_Status Status Data (See the IDistributeEvent documentation for additional information on the DATA_STATUSREQUEST structure and the various data values). An example of a status message was shown above after the Events overview. Copyright 2013 Lenel Systems International, Inc. 138 Index Access Denied Under Duress.................... 22 Access Granted ....................................... 3, 8 Access Granted - Anti-Passback Not Used25 Access Granted - Anti-Passback Used ...... 25 Access Granted No Entry Made ................. 8 Access Granted On Facility Code ...... 8, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137 Access Granted On Facility Code No Entry Made ....................................................... 9 Access Granted Under Duress ............ 18, 22 Access Granted Under Duress – No Entry Made ..................................................... 22 Alarm Active ............................................. 27 Anti-Passback Invalid Entry Reader ......... 26 Anti-Passback Invalid Exit Reader ........... 26 Anti-Passback Violation ........................... 24 Archive Server Failure .............................. 99 Area Closed ............................................... 25 Area Limit Exceeded ................................ 24 Asset Denied – Asset Disable Command Sent ......................... 17, 43, 44, 45, 46, 77 Asset Denied - Invalid Access .................. 75 Asset Denied - Invalid Asset..................... 75 Asset Denied - Invalid Cardholder ........... 75 Asset Denied - No Asset Privileges .......... 76 Asset Granted - Asset Owner .................... 76 Asset Granted - Asset Privileges Only...... 76 Audibles Silenced ..................................... 81 Audibles Unsilenced ................................. 81 Cabinet Tamper ......................................... 31 Call Conferenced ...................................... 95 Call Disconnected ..................................... 92 Call Ended................................................. 94 Call Established ........................................ 94 Call Failed ................................................. 93 Call Queued .............................................. 95 Call Removed from Queue ....................... 96 Call to a Busy Subscriber .......................... 91 Call to a Private Subscriber....................... 91 Call to an Open Subscriber ....................... 91 Call Transferred ........................................ 95 Canceled Cabinet Tamper ......................... 32 Copyright 2013 Lenel Systems International, Inc. Canceled Grounded Loop ......................... 34 Canceled Line Error .................................. 33 Canceled Open Line .................................. 33 Canceled Power Failure ............................ 32 Canceled Shorted Line .............................. 33 Command 10 Set From Reader ................. 39 Command 11 Set From Reader ................. 39 Command 12 Set From Reader ................. 40 Command 13 Set From Reader ................. 40 Command 14 Set From Reader ................. 40 Command 15 Set From Reader ................. 40 Command 4 Set From Reader ................... 37 Command 5 Set From Reader ................... 38 Command 6 Set From Reader ................... 38 Command 7 Set From Reader ................... 38 Command 8 Set From Reader ................... 38 Command 9 Set From Reader ................... 39 Command Pin+10 Set From Reader ......... 36 Command Pin+20 Set From Reader ......... 37 Communications Lost ............................... 41 Communications Restored ........................ 41 DATA_ASSET ............................. 75, 76, 77 DATA_STATUSREQUEST .................. 138 Database Error in Panel Download ........... 34 Denied Count Exceeded ............................ 12 Denied Events ........................................... 12 Denied UnMask – Active Zones in Group 16 Disk Full Warning..................................... 42 Door Contact Tamper ............................... 31 Door Contact Tamper Canceled................ 31 Door Forced Open................................. 4, 29 Door Forced Open Canceled ..................... 29 Door Held Open ........................................ 30 Door Held Open Canceled ........................ 30 Door Shunt Command Executed From Reader ................................................... 36 Door Shunt Command Results - Canceled 37 Driver Error In Panel Download ............... 35 Fire Alarm Acknowledge .......................... 78 Fire Alarm Block Acknowledge ............... 78 Fire Alarm In............................................. 78 Fire Alarm Out .......................................... 78 Full Panel Download Completed .............. 35 139 Full Panel Download Started .................... 34 Global I/O Executed Function List ........... 41 Grounded Loop Alarm Active .................. 29 Hold........................................................... 93 Host Executed Function List ..................... 36 Inactive Badge .......................................... 15 Incoming Call............................................ 92 Initiated ..................................................... 94 Intercom Exchange Failure ....................... 96 Intercom Function ..................................... 92 Invalid Access Level ................................. 14 Invalid Badge ............................................ 13 Invalid Card Format .................................. 12 Invalid Facility Code................................. 13 Invalid Issue Code..................................... 14 Invalid PIN Number .................................. 14 Line Error Active ...................................... 28 LNLMESSAGE .............................. 4, 5, 138 Low Voltage.............................................. 43 Low Voltage Restored .............................. 43 Motion Detected........................................ 98 Motion Detected Restored ........................ 98 No Command Authority ........................... 16 OnlineCanceled ......................................... 27 Open Device Events .................................... 3 Open Line Alarm Active ........................... 28 Overview ..................................................... 3 Panel Power Up Complete ........................ 34 Power Failure ............................................ 32 Reader Excluded From Access List .......... 15 Reader Input Tamper ................................ 30 Reader Input Tamper Canceled ................ 31 Relay Contact Activated ........................... 35 Relay Contact Deactivated........................ 36 Request By PIN Only................................ 13 Retrieved ................................................... 94 Ringing...................................................... 93 Security Alarm Acknowledge ................... 80 Security Alarm Block Acknowledge ........ 80 Security Alarm In ...................................... 80 Copyright 2013 Lenel Systems International, Inc. Security Alarm Out ................................... 80 Shorted Line Alarm Active ....................... 28 Status In .................................................... 81 Status Messages ...................................... 138 Status Out .................................................. 82 Supervisory Acknowledge ........................ 79 Supervisory Block Acknowledge ............. 79 Supervisory In ........................................... 79 Supervisory Out ........................................ 79 System Reset ............................................. 81 Tamper Alarm Active ............................... 28 Test Report ................................................ 93 Timeout Exceeded – No Second Card ...... 24 Transmitter Alarm ................................... 111 Transmitter Alarm Restored ................... 117 Transmitter Inactivity.............. 117, 118, 119 Transmitter Low Battery ................. 111, 112 Transmitter Low Battery Restored.......... 112 Transmitter Pre-Tilt ................................ 116 Transmitter Pre-Tilt Restored ................. 116 Transmitter Pull Cord Alarm .................. 115 Transmitter Pull Cord Restored .............. 115 Transmitter Tamper ................................ 111 Transmitter Tamper Restored ................. 112 Transmitter Temporary Tilt Disable ....... 116 Transmitter Tilt ....................................... 113 Transmitter Tilt Disabled ........................ 114 Transmitter Tilt Enabled ......................... 114 Transmitter Tilt Restored ........................ 113 Trouble Acknowledge ............................... 83 Trouble Block Acknowledge .................... 82 Trouble In.................................................. 82 Trouble Out ......................................... 82, 83 Trouble Report .......................................... 92 Unanswered Call ....................................... 95 Use Limit Exceeded .................................. 16 User Generated Video Event .................... 99 Video Event Threshold Reached .............. 98 Video Server Disk Full ............................. 98 Watch Tour Station Late ........................... 42 140 Copyright 2013 Lenel Systems International, Inc. 141

Opendevice - Events Guide

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.