Transcript
Coming Soon Building upon IRT’s commitment toward innovation and ongoing product development, several new products are currently in development. These include: 3G/HD/SDI test pattern generator with composite and component outputs plus an analog and AES Audio generator. 10/100/1000 BaseT to 1000 BaseX Switching Media Converter with optional 3G/HD/ASI/ASI optical link over a single fibre using CWDM. ASI to IP and IP to ASI converter. Network interface converter for ASI to G703 & SMPTE-310 conversion .
IRT-6000-TPD 8 Input / 8 Output Relay Network Interface
The IRT-6000-TPD finds particular use in gathering alarm and status information from non-network controlled devices that use either relay or transistor switch to ground output ports. The IRT-6000-TPD also has the ability to control non-networked devices that only need simple switching. The module can be controlled via Dashboard.
ABOUT OPENGEAR openGear is an open-architecture rack system developed to provide a standard rack based platform on which companies can develop card-based audio & video products. The openGear frame supports redundant power supplies and a robust network management system. The DashBoard® control software is available as a free download.
ABOUT IRT IRT Electronics have been designing and manufacturing products for the Broadcast and Telecommunication industries for over 40 years and have built a reputation based on innovation, reliability and level of support.
26 Hotham Parade Artarmon, NSW, 2064 Australia Phone: +61 2 9439-3744 Fax: +61 2 9439-7439 E-mail:
[email protected]
March 2014
IRT-6690-DDT & IRT-6690-DDR Multi-channel SDI/ASI optical link
IRT-6010-DDA 3G/HD/SDI/ASI DA with optional bypass relay
IRT-6080-DVS 3G/HD/SDI/ASI Digital Video Switcher & Router
The IRT-6690-DDT/DDR supports up to eight independent ASI or SDI channels on a single wavelength, over a single optical fibre. The addition of passive CWDM devices can further extend the number of channels supported over a single fibre. Both modules support Dashboard monitoring and control. Each cable input supports automatic equalization. Module pictured on front cover.
The IRT-6010-DDA can be configured as either Single 1 In, 8 Out or Dual 1 In, 4 Out 3G/HD/SDI/ASI Distribution Amplifier. Each input is independent and supports automatic cable equalization. The IRT-6010-DDA is also configurable for automatic changeover from one input to the other on loss of input signal allowing for an input Main/Standby scenario. The module can be controlled via Dashboard
The IRT-6080-DVS can be configured as either an 8x1 or dual 4x1 switcher or an 8x2 or 4x2 router. Each cable input supports 3G/HD/SD/ASI data rates and automatic equalization. The module can be controlled via Dashboard or an optional remote control.
IRT-6630-DTR 3G/HD/SDI/ASI optical link
The IRT-6630-DTR supports 3G/HD/SD/ASI data rates on a single wavelength, over a single optical fibre. The module consists of an independent transmitter and receiver section. Using two modules and the addition of an on board passive CWDM device, a bi-directional link over a single fibre can be constructed. The module supports Dashboard monitoring and control. Each cable input supports automatic equalization and can support automatic changeover switching of inputs for signal redundancy.
IRT-6630-DDT & IRT-6630-DDR 3G/HD/SDI/ASI optical link
The IRT-6630-DDT/DDR supports 3G/HD/SD/ASI data rates on a single wavelength, over a single optical fibre. The addition of passive CWDM devices can further extend the number of channels supported over a single fibre. Both modules support Dashboard monitoring and control. Each cable input supports automatic equalization and can also support automatic changeover switching of inputs for signal redundancy. The transmitter and receiver can optionally configured to support two independent optical links or both channels over a single fibre using an optional onboard CWDM multiplexer / demultiplexer.
IRT-6400-DAA Dual AES/EBU DA with optional resampling
IRT-6170-AVS 75 ohm Relay Switch
The IRT-6400-DAA can be configured as either a Dual 1x4 or 1x8 Distribution amplifier. The inputs can be either balanced 110 ohm or unbalanced 75 ohm selectable by links and choice of rear assembly. All outputs are transformer coupled and can be also be optionally resampled to a local 48Hkz rate or referenced to the secondary input. The module can be controlled via Dashboard.
The IRT-6170-DVS can be configured as either a dual 4x1 or 1x7 switch. The wide bandwidth 75 ohm inputs and outputs support a variety of signal types including Composite or component Video, unbalanced AES and G.703 etc. The module can be controlled via Dashboard or an optional remote control.
IRT-6170-AMS 3G/HD/SDI/ASI/G703/Video/Audio relay changeover
IRT-6170-AAS Analog / Digital Audio Relay Switcher
The IRT-6170-AMS combines one video and two audio changeover relay switches into a single module. The video path supports 3G/HD/SD-SDI, Analogue Video, ASI, G.703 signals @ 2, 8, 34, 45, 144, 155 Mb/s, and unbalanced AES. Audio path suitable for 2 balanced, or 4 unbalanced, audio or data signals, and balanced AES. The module can be controlled via Dashboard or an external remote control. Pictured rear page.
The IRT-6170-AAS can be configured as either a dual 4x1 or 7x1 switch. The Balanced 110 ohm inputs and outputs support either balanced or unbalanced analog audio or balanced AES. The module can be controlled via Dashboard or an optional remote control.
