Transcript
Model No.: MX1616-31H
Operating Instructions Thanks for purchasing our product. Please be sure to read this instruction manual carefully before using our product.
Introduction Grandbeing’s MX1616-31H is an 16-by-16 HDMI in UTP out matrix. It allows any of the sixteen HDMI inputs to be routed to any of the sixteen UTP Outputs simultaneously, no matter the source is HDCP or not. Users can choose several different ways to control the matrix: by using infrared extension receiver, RS232, RS485, LAN, touch panel, panel buttons and supplied remote control. IR emitters in the matrix are for controlling the sources, the IR control signal could be from remote locations when work with EX0101-H02.
The transmission distance of UTP outputs reaches up to 100 meters under the video format of 1080P 36bit, together with infrared control signal.
MX1616-31H offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Contents HDMI Matrix..................................................................................................... 1 Product Overview ............................................................................................ 1 Features........................................................................................................... 1 Package Contents............................................................................................ 4 Panel Descriptions ........................................................................................... 4 Front Panel ...................................................................................................... 4 Back Panel....................................................................................................... 5 Connections..................................................................................................... 6 Operations ....................................................................................................... 7 Operations ....................................................................................................... 7 Specifications................................................................................................. 18 Typical Application ......................................................................................... 19 Maintenance .................................................................................................. 19 Provided Service............................................................................................ 19 Mail-In Service ............................................................................................... 20 Warranty ........................................................................................................ 20 Warranty Limits And Exclusions..................................................................... 20
HDMI Matrix ■
Product Overview ( Model Number: MX1616-31H )
Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
■ z
Features Allows up to 16 HDMI audio/video devices to be independently switched to 16 HDMI monitors, HDTVs, or projectors.
z
The 16 outputs could show the same or different source simultaneously no matter the source is HDCP or not.
z
The UTP Outputs must work with EX0101-H02.
z
Reading and saving EDID function from displays.
z
Support high definition resolutions, including 1080p, 1080i, 720p and other standard video formats. Page 1
z
Each port supports both HDMI and DVI inputs.
z
With extra infrared extension receiver.
z
Seven switching modes: panel buttons, touch panel, local IR, IR call back from remote locations, RS232, RS485 and Ethernet.
z
16 IR emitters to control the HDMI sources.
z
Provides three records to save the current state of the matrix routing switch.
z
Source signal preview.
z
Output-port monitor.
z
IR code edits.
z
HDCP compliant.
z
HDMI 1.4 with 3D.
"
Notice
Grandbeing Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
Page 2
Warning To reduce the risk of fire, electric shock or product damage: 1. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects
6. Clean this apparatus only with dry cloth.
filled with liquids, such as vases, shall be placed on the apparatus.
2. Do not install or place this unit
7. Unplug this apparatus
in a bookcase, built-in cabinet or
during lightning storms or
in
when unused for long
another
confined
space.
Ensure the unit is well ventilated.
periods of time.
3. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.
8. Protect the power cord
4. Do not install near any heat sources such as radiators, heat registers,
stoves,
or
other
apparatus (including amplifiers)
from being walked on or pinched particularly at plugs.
9. Only use attachments / accessories specified by the manufacturer.
that produce heat.
5. Do not place sources of naked
10. Refer all servicing to
flames, such as lighted candles,
qualified service
on the unit.
personnel.
Page 3
Package Contents
■
① Main
unit. P/N_MX1616-31H.
② Operating
Instructions. P/N_INSMX1616-31H.
③ Handles. ④ Mounting
ears.
⑤ Stylus. ⑥1
x 100~240V AC Power cable.
⑦1
x USB to UART cable.
⑧1
x RS232 to RS485 convertor.
⑨1
x IR RX (IR receiver cable).
⑩ 16 ⑪1
x IR TX (IR emitter cable).
x Remote.
NOTE: Cables are optional. ■
Panel Descriptions Front Panel
Page 4
①
Touch panel.
②
Function panel button.
③
Keypad.
④
Indicator of operating.
⑤
IR receive window.
⑥
Power switch. Back Panel
①
ISP port
②
LAN port
③
IR extension
④
RS232 port
⑤
RS485 ports
⑥
IR emitter, corresponding to the Input port from 1 to 16
⑦
HDMI IN
⑧
IR RX, work with EX0101-H02
⑨
Ethernet port, work with EX0101-H02
⑩
RS232 port, work with EX0101-H02
⑪
Status of Link, when UTP cable connected, the led inside lights Page 5
⑫
UTP OUT, connect to EX0101-H02 UTP IN
⑬
ISP port for update
⑭
Power input
"
NOTE: RS232 port, RS485 port and LAN port are for matrix control. The LAN port is connected to the computer via direct UTP and connected to the router via cross UTP. ISP port is only for upgrading.
Connections
■
①
Connect the HDMI input sources (
such as HD-DVD, PS3, STB etc)
into MX1616-31H. ②
Connect UTP OUT of MX1616-31H to UTP IN of EX0101-H02.
③
Connect HDMI OUT of EX0101-H02 to display equipment(
such as :
HD-LCD、HD-DLP ). ④
Connect the Broadband IR receive cable into EX0101-H02 IR RX port and connect the IR emitter cables into MX1616-31H IR emitter ports.
⑤
Power on the input source you want to show.
⑥
Plug the power cable into MX1616-31H and turn on power switch
⑦
Turn on the display you want to watch.
⑧
Use the remote supplied or pushes the button on the front panel to choose input source, or using touch panel, infrared extension receiver, RS232, RS485 or LAN port to do the control.
"
NOTE: IR emitter (IR TX) should be sticked as near as to the DVD IR receive window.
Page 6
■
1)
Operations Operation on Touch panel. ① Main Menu
② Switch Menu
TYPE A: Step A.1: Select an output port or ‘A’, and press “OK”, Step A.2: Select an input source, and press “OK”. TYPE B: Step B.1: Select a model, and press “OK”.
"
NOTE: ‘C’ means Clear, if type the wrong number, press ‘C’. ‘A’ means All, only valid at step A.1. ‘M’ means the model which records the state of the matrix routing switch, and there are three models provided.
Page 7
③ Preview Menu
"
Step: Select an Input port, and press “OK”.
④ Observe Menu
" ③
" Page 8
Step: Select an output port, and press “OK”. Save Menu
Step: Select a save model, and press “OK”.
④
Setting Menu There are 5 sub-menu here: EDID/LC/IR/EQ/RST.
i. EDID menu There are 6 mode provided. When select a different mode, and press “OK”, the following warning box will pop up:
The mode selected will be effective after next power-on.
Page 9
EDID mode details: Index
"
EDID Mode
Details copy HDMI output's edid to the specified input
Remark
1
Full Copy
2
Limited Copy
3
Fixed 1080P-2CH
Fix EDID—1080p stereo
Note3
4
Fixed 1080P-6CH
Fix EDID—1080p 5.1Audio
Note4
5
Fixed 1080P-8CH
Fix EDID—1080p 7.1Audio
Note5
6
Fixed 1080i-2CH
Fix EDID—1080i stereo
Note6
port Limited copy HDMI output's edid to the specified input port
Note1
Note2
Note: 1.When this mode is effective, press “CPY”, select the output port and input port. For example, if select output-3, input-8, if will copy the output-3’s EDID to input-8.
"
Note: 2.See as note1. If the video appears noise or interference when using full copy mode, you can change to limited copy mode.
"
Note: 3.The matrix will use the embedded 1080p-stereo EDID when this mode is effective.
"
Note: 4.The matrix will use the embedded 1080p-5.1Audio EDID when this mode is effective.
"
Note: 5.The matrix will use the embedded 1080p-7.1Audio EDID when this mode is effective.
"
Note: 6.The matrix will use the embedded 1080i-stereo EDID when this mode is effective.
Page 10
ii. LC menu There are 4 mode in LC menu.
Page 11
Index
Long cable mode
Details
1
H-OFF, UTP-ON
Hdmi LC mode off; UTP LC mode on.(Default)
2
H-OFF, UTP-OFF
Hdmi LC mode off; UTP LC mode off
3
H-ON, UTP-ON
Hdmi LC mode on; UTP LC mode on
4
H-ON, UTP-OFF
Hdmi LC mode on; UTP LC mode off
If the video appears noise or interference when the long HDMI/UTP cable is used or the quality of HDMI/UTP cable is not so good, open the LC mode. iii. IR menu
IR call back from remote locations to control the HDMI Matrix MX1616-31H. You can use the MX1616-31H’s remote through the IR RX of the UTP receiver Page 12
to change the input channel for the UTP out of the MX1616-31H, just changing this UTP output. This function can be set on or off:
iv.
Index
IR Call Back
Details
1
Turn on
Turn on IR callback function
2
Turn off
Turn off IR callback function
EQ menu
Provides 32-modes for each Input in a balanced and pre-emphasis adjustment: press”OBJ”, select an Input port you want to adjust, then select the EQ mode, press “OK”.
Page 13
Index
details
Index
Setting details
Index
Setting details
Index
Setting details
1
0db/0db
9
16db/0db
17
23db/0db
25
26db/0db
2
0db/-3db
10
16db/-3db
18
23db/-3db
26
26db/-3db
3
0db/-6db
11
16db/-6db
19
23db/-6db
27
26db/-6db
12
16db/-9db
20
23db/-9db
28
26db/-9db
0db/-9db
4
（default）
5
10db/0db
13
19db/0db
21
25db/0db
29
27db/0db
6
10db/-3db
14
19db/-3db
22
25db/-3db
30
27db/-3db
7
10db/-6db
15
19db/-6db
23
25db/-6db
31
27db/-6db
8
10db/-9db
16
19db/-9db
24
25db/-9db
32
27db/-9db
" v.
Setting
NOTE: If the image flickering, recommend to set to the Index 1.
RST menu Press “RST”, all of the settings will be reset to the default settings. ⑤
"
Info Menu
NOTE: Red dot indicates that the corresponding RJ45 output port is in single output mode. Details please see the attached CD-ROM about RJ45 output mode switch instructions.
Page 14
Press “MS”-----View the current status of matrix Press “M1”-----View the pre-existing state of matrix (Model 1) Press “M2”-----View the pre-existing state of matrix (Model 2) Press “M3”-----View the pre-existing state of matrix (Model 3) Press “EQ”----- View the current EQ setting status of matrix
"
NOTE: If the touch screen becomes insensitive, calibration is necessary
Touch screen calibration method: Press the panel button “Setting” in the home menu status, holding until the following prompt appears (about 4s).
Press the symbol's center, until the one disappears and another symbol appears, and press its center again until the end of the calibration—OK or Failure. If the calibration is fail, please confirm whether the symbol’s center was aligned, then try again. When finish the calibration, press the panel button “Setting”, holding until exit the calibration menu (about 4s)
2) Operation on panel buttons.
Page 15
“FUCNTION” area: Select the operation function “KEYPAD” area: Auxiliary to complete the function “INDICATOR” area: Simple Tips for steps ① Switch Function TYPE A: Step A.1: Press “Switch”, Step A.2: Select an output port or ‘A’, and press “OK”, Step A.3: Select an input source, and press “OK”. TYPE B: StepB.1: Press “Switch”, Step B.2: Select a model, and press “OK”.
"
NOTE: ‘C’ means Clear, if type the wrong number, press ‘C’. ‘A’ means All, only valid at step A.2. ‘M’ means the model which records the state of the matrix routing switch, and there are three models provided.
② Preview Function Step: Press”Preview”, then select an input port, press “OK” ③ Observe Function Step: Press”Observe”, then select an output port, press “OK” ④ Save Function Step: Press”Save”, then select a save model, press “OK” ⑤ Setting Function Step: Press”Setting”, then select an EDID mode (Index), press “OK” ⑥ Info Function Step: Press”Info”, then view the current status of matrix. ⑦ Cancel Function Step: Press”Cancel”, then cancel the current operation, return to the home menu. Page 16
2) Operation via IR remote. IR Local or IR extender: Step1: select an output port; Step2: select an input port or ‘<<’/’>>’ (down/up)
"
NOTE: The time between the two steps must be less than 4
seconds.
IR callback: Step: select an input port or ‘<<’/’>>’ (down/up)
" 3)
NOTE: Can only control the corresponding UTP port.
Operation via RS232/RS485.
Details please see the attached CD-ROM.
4)
Operation via LAN.
Details please see the attached CD-ROM.
Page 17
■
Specifications
Operating Temperature Range
-5 to +35oC (-41 to +95oF)
Operating Humidity Range
5 to 90 % RH (no condensation)
Video Amplifier Bandwidth
2.25Gbps
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Maximum Single Link Range
1080p Deep Color VESA: 640x480, 800x600, 1024x768,
Video Format Supported
1280x1024, 1600x1200, 1920x1200 DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p
Output Video
HDMI 1.4
Power Consumption
60 Watts (max.)
Power Supply
100~240V AC
Dimensions
440mm (W) x 350mm (H) x 390mm (D)
Mass
20 KGS
Page 18
■
Connections And Typical Application
■
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit.
■
Product Service
● Provided Service 1)
Damage Requiring service: The unit should be serviced by qualified service personnel if: z
The DC power supply cord or AC adaptor has been damaged;
z
Objects or liquids have gotten into the unit;
z
The unit has been exposed to rain;
z
The unit does not operate normally or exhibits a marked change in performance;
z
2)
The unit has been dropped or the cabinet damaged.
Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.
3)
Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
Page 19
4)
Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
● Mail-In Service When shipping the unit, carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a daytime phone and/or email address where you can be reached. If repair is needed during the limited warranty period the purchaser will be required to furnish a sales receipt/proof of purchase indicating date of purchase, amount paid and place of purchase. Customer will be charged for the repair of any unit received without such proof of purchase.
● Warranty If your product does not work properly because of a defect in materials or workmanship, Grandbeing Company (referred to as “the warrantor”) will, for the length of the period indicated as below, （Parts (1) Year， Labor(90) Days）which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.
● Warranty Limits And Exclusions 1)
This Limited Warranty ONLY COVERS failures due to defects in
Page 20
materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service Center or other Authorized Service, or damage that is attributable to acts of God. 2)
There are no express warranties except as listed under “limited warranty coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service location, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.)
3)
Parts and service, which are not covered by this limited warranty, are your responsibility.
Page 21
Grandbeing Technology Co., Ltd. Address: 6C, Jialitai Building, No. 6 Yanshan Road, Nanshan District Shenzhen, P.R. China
/
Tel: 86-755-26678449 Fax: 86-755-26678549 Post Code: 518067 www.grandbeing.biz
