Transcript
Operating Instructions 7 Day Digital Timer Model 1529 with 3 Programmable Settings
1
2
3
4
5 6
General
7
8
9
1 Program number for preset time 2 Time of day / preset time / operating duration display 3 Day of the week display 4 Operation indicator 5 Setting / viewing the time; setting / recalling day of the week 6 Presetting / recalling starting time; setting / recalling day of the week 7 Heater On/Off 8 Reverse key for setting time of day or heater start-up time; viewing and reducing operating duration / remaining operating time 9 Forward key for setting time of day or heater start-up time; presetting day of start-up; viewing and extending operating duration / remaining operating time
The 7 day timer with 3 time settings enables you to preset the start of the heater operation up to 7 days in advance. It is possible to program 3 different starting times, only one of which can be activated at any one time and one event (desired programmed event must be initiated each time required). When the ignition is switched on, the timer displays the current time and day of the week. When the heater is switched on, the display and buttons are illuminated. After the power supply has been connected, all symbols on the display will flash. The current time and weekday must be set.
Operation
The timer can be operated in that all flashing symbols can be adjusted by means of the and buttons. If no adjustments are made within 5 seconds, the current setting displayed will be stored in memory. If the and buttons are pressed for more than 2 seconds, the fast time-setting mode is activated. If the ignition is switched off while the heater is operating in the continuous mode, the remaining operating time of 15 minutes is displayed and the heater continues to operate for this period of time. Whenever power supply is disconnected, all programmed settings will be lost.
Switching the heater on
Manually: by pressing the button (continuous heating mode). Automatically: by programming the heater starting time. The button will be illuminated during operation.
Switching the heater off
Manually: by pressing the button. Automatically: after the programmed operating time has elapsed. With the heater running: by programming the remaining operating time. The button light and operation indicator f will extinguish.
Setting time/ day of the week
Press the button for more than 2 seconds - time of the day is flashing - and set the clock using the and buttons. Day of the week is flashing - adjust the day of the week.
Viewing the time With the ignition switched off: press the
button.
Programming Press the button - the memory location is flashing - using heater starting the and buttons, set start of the heater operating time. time Day of the week is flashing - set the day of the week. By repeatedly pressing the button, memory locations 2 and 3 can be programmed or the time display mode can be reached. Recalling/ erasing preset times
Repeatedly press the button until the desired memory location is displayed. To erase the preset time, press the button several times until the time of the day is displayed instead of the memory location.
Programming duration of operating time
The heater must be switched off. Press and hold the button for 3 seconds - operating time is flashing - and set the desired operating time (10 to 120 minutes) using the and buttons.
Setting the remaining operating time
Set the desired remaining operating time (1 to 120 minutes) using the and buttons. The remaining operating time refers to the time the heater still continues to remain in operation. It can only be changed while the heater is in operation and the ignition is switched off. Technical Assistance Hotline
Webasto Product N.A., Inc.
USA: Canada:
1-800-555-4518 1-800-667-8900
15083 North Road Fenton, MI 48430
www.webasto.us P/N 907108 Rev. 03/2004
Installation Instructions 7-Day Digital Timer Model 1529
Mounting Instructions:
40 ± 0.3 10
4
±1
60
R3 84
.5±
0.2
12
0
Dimensions in Millimeters
88
.6
±0
.1
.0
45
Dashboard thickness
min: 1.5 mm max: 3.0 mm The timer can be mounted directly in the dashboard. Dashboard thickness over 3.0 mm: The timer must be mounted with the Webasto Mounting Frame #
474630
Part Numbers for Individual Components: 7-Day Triple Program Digital Timer Model 1529 12-Volt 7-Day Triple Program Digital Timer Model 1529 24-Volt Adapter Harness
82774A 82775A 905778
Part Numbers for Timer Kits - includes Adapter Harness: 7-Day Triple Program Digital Timer Model 1529 12-Volt 7-Day Triple Program Digital Timer Model 1529 24-Volt
905770 905774
For questions concerning these installation instructions or products detailed on this sheet, call:
Rev. 10/00 907605
www.webasto.us
1-800-555-4518 USA 1-800-667-8900 Canada
Page 1
Installation Instructions 7-Day Digital Timer Model 1529
Terminal Connections - Timer
A-Plug (8)
Dashlight (optional)
(*4) Battery positive or ignition
*
Recommended option for Coaches, Transit and Schoolbuses: Connect pin *4 or C-Plug of adapter harness to ignition signal from vehicle.
(6)
Battery positive
(2)
Battery positive
(7)
ON/OFF signal to heater
(3)
Operation/Fault Indicator light positive
(5)
Ground
A-Plug:
AMP NO. 929 594-1 Webasto 24984A
Terminal:
AMP No. 925 596-6 Webasto 497037
Switching heater ON for instant heater operation with pin 4 connected to ignition. (Motorcoach, Transit and School bus applications) With ignition ON: Press flame button. Heater is switched ON and continues to operate until the flame button is pressed again or ignition is switched OFF. With ignition OFF: Press flame button. Heater is switched ON for the preset operating time. NOTE: If the ignition is switched off while the heater is in operation, the remaining operating time of 5 minutes flashes on the display and the heater continues to operate for this period of time.
For questions concerning these installation instructions or products detailed on this sheet, call:
Rev. 10/00 907605
www.webasto.us
1-800-555-4518 USA 1-800-667-8900 Canada
Page 2
Installation Instructions 7-Day Digital Timer Model 1529 Adapter Harness Configured for Motorcoach, Transit and School Bus Applications
C
A
Violet
9
2
Blue/ Yellow
2
3
Grey
3
C-Plug (9) Ignition Signal from Vehicle
1
B-Plug B
4 5
Brown
5
6
Red
1
7
Black
6
8
Yellow
4
(2) 7.5 AMP Fuse: Battery positive (3) Operation/Fault Indicator Light positive (5) Ground (1) Battery positive (6) ON/OFF Signal to Heater (4) Dash Light (optional)
Adapter Harness Configured for Truck Installations
A 1 2
C
B
Violet
B-Plug
Blue/ Yellow
2
Grey
3
5
Brown
5
6
Red
1
7
Black
6
8
Yellow
4
3 4
(2) 7.5 AMP Fuse: Battery positive (3) Operation/Fault Indicator Light positive (5) Ground (1) Battery positive (6) ON/OFF Signal to Heater (4) Dash Light (optional)
Operation in Truck Mode: Press Flame button Heater is switched ON (continues operation) and continues to operate until flame button is pressed again switching heater OFF. For questions concerning these installation instructions or products detailed on this sheet, call:
Rev. 10/00 907605
www.webasto.us
1-800-555-4518 USA 1-800-667-8900 Canada
Page 3
