Transcript
• • • • • • • • • • • • • • • • • • • • • • •
•
• • •
Operating temperature - 5°C to 40°C (41°F to 104°F) Humidity - Less than 80% relative humidity Luminance (50% modulation) - MPT:30Hz to 4.5mhz(+0.5/-4.0)dBOT:30Hz to 4.0mhz(+0.5/-6.0)dB K-factor (2T pulse) - MPT:Less than 2% OT:Less than 3% Chrominance - REF VIDEO IN (BNC) - MPT AM:More than 53dB MPT PM:More than 53dBOT AM:More than 50dB OT PM:More than 50dB Tape speed - GENERAL: - 11.86cm/sec. Tape media used - GENERAL: - Metal Particle Tape (MPT) Oxide Tape (OT) Fast forward/rewind time - GENERAL: - Less than 3 min. with BCT-90ML Search speed - GENERAL: - Shuttle:19 steps, STILL to 24X normal, Fwd & Rev. Jog:Frame by frame, forward and reverse Color difference (50% modulation) - VIDEO PERFORMANCE: - MPT:30Hz to 1.5mhz(+0.5/-3.0)dB OT:30Hz to 1.5mhz(+0.5/-3.0)dB Signal to noise ratio (luminance component IN/OUT) - VIDEO PERFORMANCE: - MPT:More than 51dBOT:More than 48dB Differential gain - VIDEO PERFORMANCE: - MPT:Less than 3% OT:Less than 3% Differential phase - VIDEO PERFORMANCE: - MPT:Less than 3° OT:Less than 3° Y/C delay - VIDEO PERFORMANCE: - MPT:Less than 20nsec. OT:Less than 20nsec. Frequency response - AUDIO PERFORMANCE: - MPT:50Hz to 15kHz (+1.5/3.0)dB OT:50Hz to 15kHz (+3.0/-3.0)dB Signal to noise ratio (at 3% distortion level) - AUDIO PERFORMANCE: MPT:More than 72dBOT:More than 50dB (Dolby NR off) Wow and flutter - AUDIO PERFORMANCE: - MPT:Less than 0.1%rms OT:Less than 0.1%rms Audio LINE OUT (XLR 3-pin male, CH1/2) - SIGNAL OUTPUTS: - +4dBu, 600Ohms, balanced Audio MONITOR OUT (XLR 3-pin male, CH1/2) - SIGNAL OUTPUTS: +4dBu, 600Ohms, balanced U-matic DUB OUT (with an optional BKW-2020) - SIGNAL OUTPUTS: - Y: 1.7Vp-p, 51Ohms C: 0.9Vp-p, 51Ohms S-video OUT - SIGNAL OUTPUTS: - Y: 1.0Vp-p, 75Ohms C: 0.286Vp-p (burst), 75Ohms Time code out (BNC) - SIGNAL OUTPUTS: - 1.2Vp-p, 75Ohms Other I/O - SIGNAL OUTPUTS: - REMOTE IN/OUT9-pin, female TBC REMOTE15-pin, male MONITOR8-pin, female HEADPHONESJM-60 headphone stereo jack Processor adjustment range - SIGNAL OUTPUTS: - Video level±3dB Chroma level±3dB Setup Level0 to +15 IRE Hue±15° System SC phase360°p-p System sync phase+3 to -1µsec. Y/C delay±50 nsec. Power requirements - SIGNAL OUTPUTS: - AC 90 to 265V, 48 to 64Hz Power consumption - SIGNAL OUTPUTS: - 150W Storage temperature - SIGNAL OUTPUTS: -20°C to 60°C (-4°F to 140°F)
•
• • • •
•
• • • •
•
Signal outputs - SIGNAL OUTPUTS: - VIDEO OUT 1 (BNC)Composite video, 1.0Vp-p, 75Ohms, sync negative VIDEO OUT 2 (BNC)Composite video, 1.0Vpp, 75Ohms, sync negative VIDEO OUT 3 (BNC)Composite video, 1.0Vp-p, 75Ohms, sync negative, w/wo character insertion Record/playback time - SIGNAL OUTPUTS: - More than 90 min. with BCT90ML More than 30 min. with BCT-30M Distortion T.H.D. (at 1kHz reference level) - SIGNAL OUTPUTS: - MPT:Less than 1% OT:Less than 2% Video IN (BNC) - SIGNAL OUTPUTS: - Composite video, 1.0Vp-p, 75Ohms, sync negative Component IN 1 (12-pin male) - SIGNAL OUTPUTS: - Luminance:1.0Vp-p, 75Ohms, sync negative Color difference:R-Y: 0.7Vp-p, 75Ohms, B-Y: 0.7Vp-p, 75Ohms Component IN 2 (BNC x 3) - SIGNAL OUTPUTS: - Luminance:1.0Vp-p, 75Ohms, sync negative Color difference:R-Y: 0.7Vp-p, 75Ohms, B-Y: 0.7Vp-p, 75Ohms S-video IN - SIGNAL OUTPUTS: - Y: 1.0Vp-p, 75Ohms C: 0.286Vp-p (burst), 75Ohms Audio IN CH-1/2 (XLR 3-pin female) - SIGNAL OUTPUTS: - LOW-60dBu, 3KOhms, balanced HIGH+4dBu, 600Ohms/10kOhms selectable, balanced Time code in (BNC) - SIGNAL OUTPUTS: - 0.5V to 18Vp-p, 10kOhms Component OUT 1 (12-pin male) - SIGNAL OUTPUTS: - Luminance:1.0Vp-p, 75Ohms, sync negative Color difference:R-Y: 0.7Vp-p, 75Ohms, B-Y: 0.7Vp-p, 75Ohms Component OUT 2 (BNC x 3) - SIGNAL OUTPUTS: - Luminance:1.0Vp-p, 75Ohms, sync negative Color difference:R-Y: 0.7Vp-p, 75Ohms, B-Y: 0.7Vp-p, 75Ohms
