Transcript
1300 734 253
[email protected]
1300 734 253
[email protected] www.regalelectro.com.au
THE REGAL ELECTRO TEAM ON: FOR FURTHER TECHNICAL SUPPORT PLEASE CONTACT
POWER LED (RED) IS NOT ON: Check whether the plug socket (AC) is connected and turned on at the wall socket. If yes, and the indicator does not shine, please return charger to supplier. CHARGING LED (ORANGE) LIGHT IS NOT ON: 1. Check whether output connector of charger is correctly connected to the mobility scooter. 2. If the green LED indicator light is on, then the batteries are fully charged. 3. If neither orange or green LED indicator light is on, the charger is likely to be defective. Please return to REGAL ELECTRO for further trouble shooting. CHARGING LED INDICATOR (ORANGE) LIGHT HAS NOT TURNED TO GREEN: 1. The battery is still charging, 2.After 24hrs, it’s the orange LED indicator light still hasn’t gone green, then the batteries are defective and should be returned to a service centre. CHARGING LED INDICATOR (ORANGE) LIGHT TURNS TO GREEN IMMEDIATELY: 1. Make sure the battery is fully charged. 2. If not, battery is likely to be defective. Please return battery set to battery supplier.
Valen 24V8A Battery Charger OPERATIONS MANUAL
TROUBLE SHOOTING: SPECIFICATION: MODEL INPUT AC VOLTAGE OUTPUT DC VOLTAGE OUTPUT CURRENT LED INDICATOR
OPERATING TEMPERATURE OPERATING HUMIDITY STORAGE TEMPERATURE USED BELOW THE ALTITUDE DIMENSIONS WEIGHT
OPERATING INSTRUCTION: BC VFC2408 AC 100~240V 50/60HZ 27.6V – 28.8V (24V Nominal) 8A Power/On = Red Charging = Orange Full Charge = Green Error = LED Flashing or no light 0°C - 40°C 20% - 85%RH -20°C - 70°C 2000M 216 (L) x 108.5 (W) x 59mm (H) 1.2kg
1. 2. 3.
4. 5.
6.
PRODUCT INFORMATION: Valen Chargers have been designed, manufactured and tested to Australian and New Zealand standards. Giving you the peace of mind that they will perform to expectations. Our Valen 24V Battery Charger range have their algorithm set for Gel technology batteries, such as Regal Electro’s Valen GEL range. This ensures that your mobility Scooter or Electric Wheelchair batteries are well cared for delivering maximum battery life. All the 24V Battery Chargers come standard with a 1.8m power cable and XLR (cannon) plug for ease of use.
7.
Turn off the Power Chair or Mobility Scooter. Ensure the output voltage of the charger is compatible to the voltage of the batteries. Connect the battery charger cannon plug to the charge port of the Mobility Scooter or Power Chair. Ensure that the connector fits firmly into the socket and locks into place. Connect the AC power cord on the charger. Once the charger has power to it, the red LED indicator light will turn on. When the charging starts, the orange LED indicator light will turn on. Do not leave the scooter until the charging light turns on. The fan may not turn on immediately, this does not mean the charger isn’t working. Once the charger light goes green, this does not mean that the battery is fully charged. Please leave the charger connected when the scooter isn’t in use. It’s not recommended to use the scooter unless the charger light has gone green and been green for at least 2-3 hours. The charger is a smart charger, it will not over charge your batteries. For ultimate battery life, its suggested that you leave the charger connected at all times when the scooter is not in use. The battery charger will maintain the battery at 100% state of charge.
