Transcript
Programming and visualizing
Programming with CoDeSys
OPERATOR INTERFACES AND PLC VT250
The controller integrated in the VT250 operates on the basis of the IEC 61131 approved CoDeSys programming software, version 3. All standard programming lan-
guages such as LD, FBD, IL, ST and SFC are available. Not only real object-oriented PLC programming but also all supported fieldbuses are configurable via CoDeSys.
Hans Turck GmbH & Co. KG Witzlebenstraße 7 45472 Mülheim an der Ruhr
Sense it! Connect it! Bus it! Solve it!
QVIS is the software environment used for visualization in the VT250 series. QVIS and CoDeSys are closely linked to ensure an easy symbol import for data exchange.
Pure visualization solutions are implementable with further drivers provided by QVIS for the most common control systems (MPI, RFC1006, DF1, …).
Germany Tel. +49 (0) 208 4952-0 Fax +49 (0) 208 4952-264 E-Mail
[email protected] Internet www.turck.com
D301185 1109
www.turck.com
*D301185ßß1109*
Visualizing with QVIS
Operator interfaces and PLC VT250
The HMIs (Human Machine Interfaces) of the VT250 family combine the operating and visualization functions with integrated PLC functionality as required. Therefore they can be operated either as a combined HMI PLC or as a pure HMI device. VT250 devices are equipped with a 5.7” QVGA-TFT color touch screen at the front and feature protection class IP65. The compact plastic housing measures 212 x 156 x 50 mm and can be mounted even in confined spaces.
Master or slave TURCK’s HMI series VT250 features not only visualization and control functions, it can also be applied as a gateway between fieldbus and real-time Ethernet. For this purpose the VT250 supports numerous fieldbus and Ethernet protocols. Special features: The device can be programmed as master or slave. A PROFIBUS-DP system for example can work as a peripheral master and at the same time exchange data as a slave with higher level controllers via PROFINET or Modbus TCP. This is achieved on the basis of a VT250 control system.
■ Fieldbus port master or slave
Smart details The slot for the SD memory card as well as the buffer battery are located at the backside of the device. Both are accessible from the top. The battery can thus be replaced without tools, if required. The fieldbus port is configurable either as CAN port with DeviceNet™ resp. CANopen or as PROFIBUS port. Recessed arrangement of the plugs on the backside protects against mechanical impacts and ensures that the connection cable is routed in the same direction as all other cables.
Connection options Two real-time Ethernet ports at the bottom of the VT250 are available for communication with the higher level control systems. Thanks to the double port solution the device can also be applied in an Ethernet installation arranged in line topology. A USB and a COM port for RS232 and RS485 round off the spectrum of connection possibilities. Peripheral devices such as a barcode reader and a light screen for example can be connected to the local control process via the COM port.
■ USB port
CAN port or PROFIBUS port
■ COM port RS232/RS485
■ 24 VDC power supply
■ Dual Ethernet port master or slave
Operator interfaces and PLC VT250
The HMIs (Human Machine Interfaces) of the VT250 family combine the operating and visualization functions with integrated PLC functionality as required. Therefore they can be operated either as a combined HMI PLC or as a pure HMI device. VT250 devices are equipped with a 5.7” QVGA-TFT color touch screen at the front and feature protection class IP65. The compact plastic housing measures 212 x 156 x 50 mm and can be mounted even in confined spaces.
Master or slave TURCK’s HMI series VT250 features not only visualization and control functions, it can also be applied as a gateway between fieldbus and real-time Ethernet. For this purpose the VT250 supports numerous fieldbus and Ethernet protocols. Special features: The device can be programmed as master or slave. A PROFIBUS-DP system for example can work as a peripheral master and at the same time exchange data as a slave with higher level controllers via PROFINET or Modbus TCP. This is achieved on the basis of a VT250 control system.
■ Fieldbus port master or slave
Smart details The slot for the SD memory card as well as the buffer battery are located at the backside of the device. Both are accessible from the top. The battery can thus be replaced without tools, if required. The fieldbus port is configurable either as CAN port with DeviceNet™ resp. CANopen or as PROFIBUS port. Recessed arrangement of the plugs on the backside protects against mechanical impacts and ensures that the connection cable is routed in the same direction as all other cables.
Connection options Two real-time Ethernet ports at the bottom of the VT250 are available for communication with the higher level control systems. Thanks to the double port solution the device can also be applied in an Ethernet installation arranged in line topology. A USB and a COM port for RS232 and RS485 round off the spectrum of connection possibilities. Peripheral devices such as a barcode reader and a light screen for example can be connected to the local control process via the COM port.
■ USB port
CAN port or PROFIBUS port
■ COM port RS232/RS485
■ 24 VDC power supply
■ Dual Ethernet port master or slave
Programming and visualizing
Programming with CoDeSys
OPERATOR INTERFACES AND PLC VT250
The controller integrated in the VT250 operates on the basis of the IEC 61131 approved CoDeSys programming software, version 3. All standard programming lan-
guages such as LD, FBD, IL, ST and SFC are available. Not only real object-oriented PLC programming but also all supported fieldbuses are configurable via CoDeSys.
Hans Turck GmbH & Co. KG Witzlebenstraße 7 45472 Mülheim an der Ruhr
Sense it! Connect it! Bus it! Solve it!
QVIS is the software environment used for visualization in the VT250 series. QVIS and CoDeSys are closely linked to ensure an easy symbol import for data exchange.
Pure visualization solutions are implementable with further drivers provided by QVIS for the most common control systems (MPI, RFC1006, DF1, …).
Germany Tel. +49 (0) 208 4952-0 Fax +49 (0) 208 4952-264 E-Mail
[email protected] Internet www.turck.com
D301185 1109
www.turck.com
*D301185ßß1109*
Visualizing with QVIS
