Transcript
OPTIMA Spraying Equipment Buyers’ GUIDE www.croplands.com.au
EFFECTIVE JANUARY
2014
Introduction
Welcome Dear Customer We are proud to present our 2014 Optima Buyers Guide and trust you will find this edition a valuable resource not only for your own requirements but also as a fantastic reference and training tool. Croplands have been supplying high quality sprayers and components to a variety of markets now for more than 40 years. During that time we have grown considerably, driven by our desire to integrate the very best brands from around the globe into our own innovative local designs. Croplands prides itself on strong relationships at each level, from our suppliers to our distributors and of course our end users. We embrace feedback on new product opportunities and enhancements, to ensure we maintain our positive improvement focus. Our products are built with the user in mind; they are reliable, user friendly and ultimately provide great value for money.
Selling the product is only just the start. Croplands have built an impressive distribution network right around the country supported by our regional warehouses. We have an internal customer support team with an enormous amount of experience and knowledge upon which to call. So can be assured that you will be well looked after for any parts or product information. We would like to take this opportunity to thank you for considering our products and of course thank those who have purchased Croplands spraying equipment in the past. Yours Sincerely
Sean Mulvaney General Manager Croplands (Australasia)
Nozzles – make the right choice The nozzle is arguably the most important part of any sprayer. Spraywise is the umbrella brand name for all of Nufarm and Croplands knowledge and activities in application technology. Over the last eight years, Nufarm and Croplands have been leading the industry by working with farmers to optimise their spray application. Hundreds of Spraywise demonstrations have been held over the country, including nozzle workshops and dye nights. Spraywise has been instrumental in raising awareness of important application parameters
such as coarse spray qualities. The Spraywise objective is to increase operational flexibility and significantly reduce the incidence and risk of spray drift damage to our diversified crops, without compromising efficacy. Application is the vital link between chemical and equipment. No company is in a better position to optimise this process than Nufarm/Croplands. See page 77 for more information on nozzles and Spraywise.
Liquid Fertiliser Ready "LFR" means that this Croplands product has a pump and plumbing system specifically designed to handle liquid fertiliser through the appropriate nozzles to suit the application.
2
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
CONTENTS
Section 1��������������������� 6–32
Section 3������������������� 63–76
linkage sprayers���������������������� 6
Nozzle Bodies, filters and caps��������������������� 64
BOOMS��������������������������������������16 Trailed Sprayers���������������������� 20 CropPaks��������������������������������� 24 12 volt sprayers��������������������� 26 Tray-mount Sprayers������������� 28 Chemical mixers, Foam marker and foam concentrate������� 32 Section 2������������������� 33–62 Pumps��������������������������������������� 34 Manual Control Valves/Regulators����������������� 40 Pressure Relief Valves������������� 40 Centrifugal Pumps������������������41 Flojet pumps ��������������������������� 42 Shurflo Pump ������������������������� 44 Apex 12 volt pumps����������������� 45 Knapsack sprayers���������������� 46
Electric control kits, monitors and GPS system���� 66 Electric controls and valves������������������������������ 68 Electric and manual valve kits������������������ 69 Suction Filters and Pressure Filters����������������������� 70 Manual ball Valves����������������74 Agitators, lids and tank fittings������������������ 75 Tools for Accurate Spraying�����������������������������������76 Section 4������������������ 77–111 Nozzles����������������������������������� 77 Terms and conditions�������� 110 Freight policy������������������������ 111
DIESEL, ADBLUE UNITS���������������� 52 Spray Gun, Lances and hoses������������������������������� 56 Pressure Gauges�������������������� 57 Safety with Chemical Application����������������������������� 58 Firefighters����������������������������� 60 Grain storage and hay baling applications����������������61 Spray tanks����������������������������� 62
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
3
Croplands overview
Company Information Croplands is a subsidiary of Nufarm Ltd. Croplands Equipment is one of the largest suppliers of spraying equipment, components and accessories for spraying throughout Australia and New Zealand. Some products are now being sold into the Americas, South Africa and Europe. We sell some of the best products as recognised in the spraying industry – products such as the Pegasus Broadacre Trailing range, WEEDit detection sprayers
4
Key Suppliers the Quantum Mist™ for many horticultural applications, the Cropliner for tree crops, and the RoGator ® and SpraCoupe® range of self-propelled machines. For any information on these products, please feel free to call us on: Freecall Australia 1800 999 162, or Freecall New Zealand 0800 106 898, or email
[email protected]
Quantum Mist™ range of horticultural sprayers for vine crops
Quantum Mist™ range of horticultural sprayers for tree crops
Pegasus range of trailed boomsprays for broadacre
WEEDit range of weed detecting sprayers
Cropliner range of airblast sprayers
RoGator range of self-propelled sprayers
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Linkage sprayers������������������ 6
Manual BOOMS������������������� 16
HYDRAULIC BOOMS��������������� 17
500 Linkage – Econo��������������������6
MBX Manual Fold Booms������������ 16
Hydraulic Folding GEX Booms����� 17
500 Linkage��������������������������������8
Manual Folding Cropmaster Booms��������������������� 16
Hydraulic and BDU Booms���������� 18
700 Linkage������������������������������ 10
Firebreak, Under Tree and Covered Booms������������������� 19
1000 Linkage���������������������������� 12 1100 | 1300 | 1600 Linkage�������� 14
Manual Folding Acremaster Booms��������������������� 17
Trailed Sprayers����������������� 20
12 Volt Sprayers����������������� 24
Tray-Mount Models����������� 28
300 Trailed Sprayer�������������������20 1100 | 1500 Pony Trailed Sprayers�������������������������22
30 | 60 | 100 CropPak����������������24
200 | 400 Tray-Mount�����������������28
40 APEX CropPak����������������������25 200 | 400 CropPak��������������������25
500 Tray-Mount (with Frame)�������29
Wheely Boom��������������������������� 19
CropMister 500�������������������������29
70 Litre ATV Sprayer������������������26 30 Litre Apex Trolley Sprayer ������26 50 Litre Greens Model����������������26
1100 | 1500 Tray-mount Models����������� 30
RetraSpray Retractable Reel sprayers ���������������������� 31
Chemical Handling and foam markers������������ 32 Chemical Mixers������������������������32 Foam Marker and Foam Concentrate������������������������������32
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
5
Section 1
Linkage sprayers
500 linkage – Econo
Quick Guide »» Height adjustable controller mount »» Calibrated tank with clear volume markings »» Rugged steel hose reel with 20 metres of high quality hose and adjustable spray pattern gun »» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap
NEW
»» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (MBX series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance »» Fully galvanised frame with heavy-duty boom mounts »» Easy access drain system for quick draining and cleanout
Specifications
Did you know? All Croplands linkage units have a through shaft, this gives the benefit of a longer PTO shaft, a rear mounted pump and a baffled tank.
All Croplands booms fitted with AirMix® air-induction nozzles as standard.
Tank
White polyethylene UV stabilised
Frame
Heavy-duty hot-dipped galvanised frame
Hitch points
Category I and II Linkage mounts
Pump
AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)
Filtration
3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh
Controller
GR30 manual control, pressure adjustment, one tap for boom shutoff and one for hose reel
Optional equipment
See opposite page
Note: booms may be shipped unattached to linkage frame to minimise freight cost.
6
ORDER CODE
DESCRIPTION – Standard MoDels
LA500/252
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller, hose reel (no reel or gun)
2,354.55
2,590.00
X
LA500/252R
500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller, hose reel, 20 metres of 10mm hose and RL10 gun (no boom)
2,654.55
2,920.00
X
LA500/252/4B
500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller, hose reel, 20 metres of 10mm hose, RL10 gun and 4 metre MBX boom fitted
3,254.55
3,580.00
X
LA500/252/4B-U
500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller fitted.Hose reel, 20 metres of 10mm hose, RL10 gun and 4 metre MBX boom supplied but not fitted. (note – to fit boom and reel will take approx 45–60 minutes, instructions supplied). See page 111 for freight savings
3,163.63
3,480.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Linkage sprayers
500 linkage – Econo Options Ideal for smaller farm enterprises, orchards and vineyards.
Booms
MSCL-2 shown narrow 2.3 metres
MSCL-2 shown wide 3 metres ORDER CODE
DESCRIPTION
MBX06-1
6 metre MBX manual folding boom
MSCL-2
Double-sided shielded boom fitted – ideal for vineyard applications (pictured above)
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
page
899.09
989.00
X
16
1,410.00
1,551.00
X
19
XP Boomkit XP BoomKit – kit for clamping to rear of quad bike or linkage sprayer to mount boomless nozzles*. XP BoomJets need to be purchased separately and fitted to the XP BoomKit. Ensure you order the correct size of XP BoomJet to match the flow capability of your pump. As a guide, the size 10 (B¼XP10L or R-VP) is the only suitable size for 12 volt Flojet pump applications.
XP BoomKit with XP BoomJets* fitted, shown mounted on quad bike. Approximate spray width of 6 metres. *Nozzles sold separately.
See page 96 for details and pricing on XP BoomJets.
ORDER CODE
DESCRIPTION
LT-XPBOOMKIT
XP BoomJet, left and right, fitted to the rear of the 500 Econo linkage using the XPBOOMKIT and bracket. Size B1/4XP20L and R nozzles are used for an output of 13 L/min at 2 bar pressure giving a sprayed width of approximately 7 metres. An ideal choice for hill country or liquid fertiliser applications.
$ (EX. GST)
$ (INC. GST)
250.00
275.00
PROD. CAT. X
Hand wash tank and foam marker
Another great safety feature is a hand-wash tank for use in the field. A foam marker is vital to in pasture to see where you have been.
ORDER CODE
DESCRIPTION
LT-20
20 litre hand-wash tank and brackets (fitted)
A5200052
Double sided foam marker fitted
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 275.00
302.50
X
–
1,240.00
1,264.00
X
32
Electric controls ORDER CODE
DESCRIPTION
LT-LA-IE2012A
Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 550.00
605.00
X
66
Optima BUYERS’ GUIDE – JANUARY 2014
7
Section 1
Linkage sprayers
500 linkage
Quick Guide »» Height adjustable controller mount »» Calibrated tank with clear volume markings »» Rugged steel hose reel with 30 metres of high quality hose and adjustable spray pattern gun
New Pump
»» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap »» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (MBX series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance
Did you know?
»» Fully galvanised frame with heavy-duty boom mounts
All Croplands linkage units have a through shaft, this gives the benefit of a longer PTO shaft, a rear mounted pump and a baffled tank.
»» Easy access drain system for quick draining and cleanout
Specifications All Croplands booms fitted with AirMix® air-induction nozzles as standard.
Tank
White polyethylene UV stabilised
Frame
Heavy-duty hot-dipped galvanised frame
Hitch points
Category I and II Linkage mounts
Pump
AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)
Filtration
3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh
Controller
UCM manual 4 way pressure relief valve with pressure adjustment and master on/off
Optional equipment
See opposite page
Note: booms may be shipped unattached to linkage frame to minimise freight cost. ORDER CODE
8
DESCRIPTION – Standard Models
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
LP0500
500 litre linkage tank and frame only
1,481.82
1,630.00
X
LA500
500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller (no hose reel or boom)
3,027.27
3,330.00
X
LA500/80
500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose and Turbo 400 gun (no boom)
3,509.09
3,860.00
X
LA500/30
500 litre Agripak linkage sprayer; AR30 medium pressure (0–40 bar) pump and ARGI40 2-way controller. (No hose reel or boom. Suitable for higher pressure applications)
3,509.09
3,860.00
X
LA500/80/6B
500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun and 6 metre MBX boom
4,359.59
4,795.00
X
LA500/80/6B-U
500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller fitted. Hose reel, 30 metres of 10mm hose, Turbo 400 gun and 6 metre MBX boom supplied but not fitted. (Note – to fit boom and reel will take approximately 45–60 minutes, instructions supplied). See page 111 for freight savings
4,268.18
4,695.00
X
LA500/813/MVB4-4
500 litre Agripak Sprayer with AR813 pump, ARVDR50 controller and Vertiboom with 4 nozzles per side
4,736.36
5,210.00
X
LA500/813/MVB5-5
As above with 5-nozzle per side vertiboom fitted
4,795.45
5,275.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Linkage sprayers
500 linkage Options Booms
Booms up to 10 metres are suitable for the 500 litre Linkage sprayer. Add your choice of boom options from the table below to the 500 base unit suitable for your needs – refer page 8.
ORDER CODE
DESCRIPTION
$ (EX. GST) $ (INC. GST) PROD. CAT. Page
MF06
6 metre Cropmaster boom
1,230.00
1,353.00
X
16
MF08
8 metre Cropmaster boom
1,726.36
1,899.00
X
16
MF10
10 metre Cropmaster boom
1,954.55
2,150.00
X
16
MSCL-2
Double-sided shield-spray boom – ideal for vineyard applications
1,410.00
1,551.00
X
19
BOFLS
Adjustable boom end nozzle with manual shut-off for fenceline spraying
98.88
108.76
X
19
Lift device and airbag suspension kits
Airbag suspension can protect booms from wear and tear – an excellent option to extend the life of your boom. Hydraulic lift devices are very useful in crops or pastures with varying heights.
ORDER CODE
DESCRIPTION
LT-GB383899000V Single airbag suspension for 8 and 10 metre booms LT-GBBG019802
800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 2,090.91
2,300.00
X
9
1,936.36
2,130.00
X
9
Chemical mixing and induction units
A chemical mixing and induction hopper can make a huge difference to the safety of the operator. Add this pricing to the 500 base unit.
ORDER CODE
DESCRIPTION
A5032130-KIT
30 litre chemical mixing and induction hopper fitted
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 1,550.00
1,705.00
X
32
Hand wash tank and foam marker
Another great safety feature is a hand-wash tank for use in the field. A foam marker is vital to in pasture to see where you have been.
ORDER CODE
DESCRIPTION
LT-20
20 litre hand-wash tank and brackets (fitted)
A5200052
Double sided foam marker fitted
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 275.00
302.50
X
–
1,240.00
1,264.00
X
32
Electric controls ORDER CODE
DESCRIPTION
LT-LA-IE2012A
Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps
LT-LA-IE2032W
3-section remote in-cab control system for wireless shut-off for 3 boom sections
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 550.00
605.00
X
66
1,930.00
2,123.00
X
66
IdROMinus Manual control ORDER CODE
DESCRIPTION
LT-ARIDROM-4
Idrominus compensating regulator in lieu of ARUCM-4
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 353.18
388.50
X
40
Larger pump model
Larger pump model suitable for the 500 litre linkage listed below. Add this pricing to the 500 base unit suitable for your needs – refer page 8.
ORDER CODE
DESCRIPTION
LT-AR115-C
AR115 (115 L/min, 0–20 bar) pump in lieu of AR80 pump
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 340.00
374.00
X
34
Boomless nozzle in lieu of a boom
Boomless nozzle options in lieu of a boom – ideal for hilly country or for simple liquid fertiliser application. The 5880 BoomJet requires the LA500 with AR80 or 115 pump.
ORDER CODE
DESCRIPTION
LT-XPBOOMKIT
XP BoomJet, left and right, fitted to the rear of the 500 linkage using the XPBOOMKIT and bracket. Size B1/4XP20L and R nozzles are used for an output of 13 L/min at 2 bar pressure giving a sprayed width of approximately 7 metres. An ideal choice for hill country or liquid fertiliser applications.
250.00
275.00
X
7
LT-5880KIT
Larger brass 5880 BoomJet nozzle fitted for higher liquid applications. Includes TeeJet 5880 series double-sided BoomJet and bracket to suit. Select suitable size – see nozzle section for more detail
625.00
687.50
X
96
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST) $ (INC. GST) PROD. CAT. Page
Optima BUYERS’ GUIDE – JANUARY 2014
9
Section 1
Linkage sprayers
700 linkage
Quick Guide »» Height adjustable controller mount
New Pump
»» Calibrated tank with clear volume markings »» Rugged steel hose reel with 30 metres of high quality hose and adjustable spray pattern gun »» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap »» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (Cropmaster and MHL series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance
LA700/80/8F
»» Fully galvanised frame with heavy-duty boom mounts »» Easy access drain system for quick draining and cleanout
Did you know?
Specifications
All hose used on Croplands sprayers is very high quality and made to Croplands specifications, with added longitudinal fibres to avoid stretching and 15% more nitrile for chemical resistance.
Tank
Heavy-duty hot-dipped galvanised frame
Frame
Category I and II Linkage mounts
Hitch points
AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)
Pump
3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh
Filtration
UCM manual 4 way pressure relief valve with pressure adjustment and master on/off
Controller
See opposite page
Optional equipment
See opposite page
All Croplands booms fitted with AirMix® air-induction nozzles as standard.
10
ORDER CODE
DESCRIPTION – Standard MoDels
LP0700 LA700
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
700 litre linkage tank and frame only
1,845.45
2,030.00
X
700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller (no hose reel or boom)
3,281.82
3,610.00
X
LA700/80
700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose and Turbo 400 gun (no boom)
3,690.91
4,060.00
X
LA700/80/8F
700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun and 8 metre Cropmaster boom
5,409.09
5,950.00
X
LA700/80/8F-U
700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller fitte. Hose reel, 30 metres of 10mm hose, Turbo 400 gun and 8 metre Cropmaster boom supplied but not fitted. (Note – to fit boom and reel will take approx 45–60 minutes, instructions supplied). See page 111 for freight savings
5,318.18
5,850.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Linkage sprayers
700 linkage Options Booms
Booms up to 12 metres are suitable for the 700 litre Linkage sprayer. Add your choice of boom options from the table below to the 700 base unit suitable for your needs – refer page 10. For detailed information on each boom, use the page reference at right.
ORDER CODE
DESCRIPTION
MF10
10 metre Cropmaster boom
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 1,954.55
2,150.00
X
16
MF12
12 metre Cropmaster boom
2,463.64
2,710.00
X
16
MA10
10 metre Acremaster boom
2,950.00
3,245.00
X
17
MA12
12 metre Acremaster boom
2,995.45
3,295.00
X
17
MHL12
12 metre Hydralink hydraulic-fold boom, complete with hydraulic hose kit
8,550.00
9,405.00
X
18
MHL12-2-KIT
Second set of hydraulic hoses to allow left/right individual fold of MHL boom (text on your order)
495.00
544.50
X
18
BOFLS
Adjustable boom end nozzle with manual shut-off for fenceline spraying
98.88
108.76
X
19
Lift device and airbag suspension kits
Airbag suspension can protect booms from wear and tear – an excellent option to extend the life of your boom. Hydraulic lift devices are very useful in crops or pastures with varying heights.
ORDER CODE
DESCRIPTION
LT-GB383899000V Single airbag suspension for 10 and 12 metre booms
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 2,090.91
2,300.00
X
–
LT-GBBG019802
800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor
1,936.36
2,130.00
X
–
LT-GB360589000V
1,200mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor
2500.00
22,750.00
X
–
Chemical mixing and induction units
A chemical mixing and induction hopper can make a huge difference to the safety of the operator. Add this pricing to the 700 base unit.
ORDER CODE
DESCRIPTION
$ (EX. GST) $ (INC. GST) PROD. CAT. Page
A5032130-KIT
30 litre chemical mixing and induction hopper fitted
1,550.00
1,705.00
X
32
L-H9351A-KIT
60 litre chemical mixing and induction hopper fitted
1,750.00
1,925.00
X
32
Hand wash tank and foam marker
Another great safety feature is a hand-wash tank for use in the field. A foam marker is vital to in pasture to see where you have been.
ORDER CODE
DESCRIPTION
LT-20
20 litre hand-wash tank and brackets (fitted)
A5200052
Double sided foam marker fitted
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 275.00
302.50
X
–
1,240.00
1,264.00
X
32
Electric controls ORDER CODE
DESCRIPTION
LT-LA-IE2012A
Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps
LT-LA-IE2032W
3-section remote in-cab control system for wireless shut-off for 3 boom sections
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 550.00
605.00
X
66
1,930.00
2,123.00
X
66
Idrominus Manual control and Triplex nozzles ORDER CODE
DESCRIPTION
LT-ARIDROM-4
Idrominus compensating regulator in lieu of ARUCM-4
BT-TRIPLEX
Triplex nozzle bodies complete with AirMix Jets in sizes 110 #02, 025, 03. Price is per nozzle required on the selected boom
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 353.18
388.50
X
40
57.00
62.70
X
64
Larger pump model
Larger pump model suitable for the 500 litre linkage listed below. Add this pricing to the 500 base unit suitable for your needs – refer page 6.
ORDER CODE
DESCRIPTION
LT-AR140-C
AR140-LFP (140 L/min, 0–20 bar) pump in lieu of AR80 pump
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 308.00
338.00
X
34
Boomless nozzle in lieu of a boom
Boomless nozzle options in lieu of a boom – ideal for hilly country or for simple liquid fertiliser application. The XP BoomJet option is suitable for the LA500/20 model. The 5880 BoomJet requires the LA700 with AR80 or 115 pump.
ORDER CODE
DESCRIPTION
LT-XPBOOMKIT
XP BoomJet, left and right, fitted to the rear of the 700 linkage using the XPBOOMKIT and bracket. Size B1/4XP20L and R nozzles are used for an output of 13 L/min at 2 bar pressure giving a sprayed width of approximately 7 metres. An ideal choice for hill country or liquid fertiliser applications.
250.00
275.00
X
7
LT-5880KIT
Larger brass 5880 BoomJet nozzle fitted for higher liquid applications. Includes TeeJet 5880 series double-sided BoomJet and bracket to suit. Select suitable size – see nozzle section for more detail
625.00
687.50
X
96
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST) $ (INC. GST) PROD. CAT. Page
Optima BUYERS’ GUIDE – JANUARY 2014
11
Section 1
Linkage sprayers
1000 linkage
Quick Guide »» Height adjustable controller mount »» Calibrated tank with clear volume markings »» Rugged steel hose reel with 30 metres of high quality hose and adjustable spray pattern gun »» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap »» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (Cropmaster and MHL series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance
LA1000/80/10F
Did you know? All Croplands tanks have a high proportion of UV inhibitor added to protect from sun degradation and have a nominal thickness of 4mm for excellent strength.
»» Fully galvanised frame with heavy-duty boom mounts All Croplands booms fitted with AirMix® air-induction nozzles as standard.
»» Easy access drain system for quick draining and cleanout »» Forklift points on bottom frame rails to assist with loading/unloading from a vehicle »» Folding access step fitted for safety »» Integrated handwash tank standard
Specifications Tank
White polyethylene UV stabilised
Frame
Heavy-duty hot-dipped galvanised frame
Hitch points
Category II and III Linkage mounts
Pump
AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)
Filtration
3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh
Controller
UCM manual 4 way pressure relief valve with pressure adjustment and master on/off
Optional equipment
See opposite page
LA1000 with MA10 boom
12
ORDER CODE
DESCRIPTION – Standard MoDels
LP01000 LA1000
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
1000 litre linkage tank and frame only
2,727.27
3,000.00
X
1000 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, (no hose reel or boom)
4,954.55
5,450.00
X
LA1000/80
1000 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun (no boom)
5,290.91
5,820.00
X
LA1000/80/10F
100 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun and 10 metre Cropmaster boom
6,990.91
7,690.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Linkage sprayers
1000 linkage Options Booms
Booms up to 15 metres are suitable for the 1000 litre Linkage sprayer. Add your choice of boom options from the table below to the 1000 base unit suitable for your needs – refer page 12. For detailed information on each boom, use the page reference at right.
ORDER CODE
DESCRIPTION
MF12
12 metre Cropmaster boom
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 2,463.64
2,710.00
X
16
MA10
10 metre Acremaster boom
2,950.00
3,245.00
X
17
MA12
12 metre Acremaster boom
2,995.45
3,295.00
X
17
MHL12
12 metre Hydralink hydraulic-fold boom, complete with hydraulic hose kit
8,550.00
9,405.00
X
18
MHL15
15 metre Hydralink hydraulic-fold boom, complete with hydraulic hose kit
9,650.00
10,615.00
X
18
MHL12-2-KIT
Second set of hydraulic hoses to allow left/right individual fold of MHL boom (text on your order)
495.00
544.50
X
–
BOFLS
Adjustable boom end nozzle with manual shut-off for fenceline spraying
98.88
108.76
X
19
Lift device and airbag suspension kits
Airbag suspension can protect booms from wear and tear – an excellent option to extend the life of your boom. Hydraulic lift devices are very useful in crops or pastures with varying heights.
ORDER CODE
DESCRIPTION
$ (EX. GST) $ (INC. GST) PROD. CAT. Page
LT-GB383899000V Single airbag suspension for 10, 12 and 15 metre booms
2,090.91
2,300.00
X
–
LT-GBBG019802
800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor
1,936.36
2,130.00
X
–
LT-GB360589000V
1,200mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor
2,500.00
2,750.00
X
–
Chemical mixing and induction units
A chemical mixing and induction hopper can make a huge difference to the safety of the operator. Add this pricing to the 1000 base unit.
ORDER CODE
DESCRIPTION
A5032130-KIT
30 litre chemical mixing and induction hopper fitted
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 1,550.00
1,705.00
X
32
L-H9351A-KIT
60 litre chemical mixing and induction hopper fitted
1,750.00
1,925.00
X
32
Foam marker and GPS GUIDANCE
A foam marker is vital to in pasture to see where you have been, or choose the GPS Guidance unit for more accuracy.
ORDER CODE
DESCRIPTION
A5200052
Double sided foam marker fitted
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 1,240.00
1,264.00
X
32
RV117-0171-429
Raven Cruizer GPS with Helix antenna – ready to go
3,790.00
4,169.00
W
66
Electric controls ORDER CODE
DESCRIPTION
LT-LA-IE2012A
Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps
LT-LA-IE2032W LT-LA-IE2052W
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 550.00
605.00
X
66
3-section remote in-cab control system for wireless shut-off for 3 boom sections
1,930.00
2,123.00
X
66
5-section remote in-cab control system for wireless shut-off for 5 boom sections
2,100.00
2,310.00
X
66
Manual control and Triplex nozzles ORDER CODE
DESCRIPTION
LT-ARIDROM-4
Idrominus compensating regulator in lieu of ARUCM-4
BT-TRIPLEX
Triplex nozzle bodies complete with AirMix Jets in sizes 110 #02, 025, 03. Price is per nozzle required on the selected boom
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 353.18
388.50
X
40
57.00
62.70
X
64
Larger pump model
Larger pump model suitable for the 1000 litre linkage listed below. Add this pricing to the 1000 base unit suitable for your needs – refer page 12.
ORDER CODE
DESCRIPTION
LT-AR140-C
AR140-LFP (140 L/min, 0–20 bar) pump in lieu of AR80 pump
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 308.00
338.00
X
34
Boomless nozzle in lieu of a boom
Boomless nozzle options in lieu of a boom – ideal for hilly country or for simple liquid fertiliser application.
ORDER CODE
DESCRIPTION
LT-5880KIT
Larger brass 5880 BoomJet nozzle fitted for higher liquid applications. Includes TeeJet 5880 series double-sided BoomJet and bracket to suit. Select suitable size – see nozzle section for more detail
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 625.00
687.50
X
96
Optima BUYERS’ GUIDE – JANUARY 2014
13
Section 1
Linkage sprayers
1100 | 1300 | 1600 linkage
Quick Guide »» Calibrated and UV stabilised poly tank with sight tube and litres marked »» Epoxy paint used on all frame components, baked to a high quality finish »» Stabiliser legs fitted to the fame to keep unit safe from tipping when parked »» Fully protected pump mounted beneath the tank for excellent suction and safety »» Fully protected large suction filter with shut-off valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Stainless steel boom tubing with non-drip nozzle bodies »» Easy access drain system for quick draining and cleanout »» Forklift points on bottom frame rails to assist with loading/unloading from a vehicle »» Integrated 1,000mm hydraulic lift device »» Integrated handwash tank standard »» Integrated 170 litre Flushing tank standard »» 30 litre chemical mixer/induction unit standard »» Clothing and glove locker »» Folding access step for safety »» Large pump standard »» All Croplands booms fitted with AirMix ® air-induction nozzles as standard
14
ORDER CODE
DESCRIPTION – Base models (no boom)
LPMEC1100/160
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
1100 litre linkage base unit with AR160 PTO-drive diaphragm pump. In cab electric 3-section control unit, flushing and hand wash tank. 1,000mm integrated hydraulic height adjuster. 30 litre chemical mixer fitted. Choose boom option from page 15
10,150.00
11,165.00
W
LPMEC1300/160
1300 litre linkage base unit with AR160 PTO-drive diaphragm pump. In cab electric 3-section control unit, flushing and hand wash tank. 1,000mm integrated hydraulic height adjuster. 30 litre chemical mixer fitted. Choose boom option from page 15
10,550.00
11,605.00
W
LPMEC1600/160
1600 litre linkage base unit with AR160 PTO-drive diaphragm pump. In cab electric 3-section control unit, flushing and hand wash tank. 1,000mm integrated hydraulic height adjuster. 30 litre chemical mixer fitted. Choose boom option from page 15
10,990.00
12,089.00
W
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Linkage sprayers
1100 | 1300 | 1600 linkage Options Booms
Booms up to 18 metres are suitable for the 1100/1300/1600 litre Linkage sprayer. Add your choice of boom options from the table below to the base unit suitable for your needs – refer page 14. For more detailed information on each boom, use the page reference at right.
ORDER CODE
DESCRIPTION
$ (EX. GST) $ (INC. GST) PROD. CAT. Page
MHL12-MEC
12 metre galvanised Hydralink hydraulic-fold boom, complete with hydraulic hose kit
8,550.00
9,405.00
W
18
MHL15-MEC
15 metre galvanised Hydralink hydraulic-fold boom, complete with hydraulic hose kit
9,650.00
10,615.00
W
18
MHL12-2-KIT
Second set of hydraulic hoses to allow left/right individual fold of MHL boom (text on your order)
495.00
544.50
W
–
LT-HYDHT-SUS
Hydraulic accumulator suspension for hydraulic lift
795.00
874.50
W
–
BDU18-MEC
18 metre BDU series concertina-fold powder-coated boom, fully hydraulic fold with individual left and right fold options. Self-locking self levelling device. Includes a 1,200mm lift in lieu of 1,000mm. Requires 2 sets remotes – one for lift, a second set with an electric diverter valve (supplied) for operating the tilt ram and fold function
14,955.00
16,450.50
W
18
BDU18-4-KIT
Extra electric/hydraulic function with in-cab switchbox for individual left/right boom folding
500.00
550.00
W
–
Controls
Electric controls, Auto rate controllers and electric fenceline options.
ORDER CODE
DESCRIPTION
LT-LA-IE2052
5-section remote in-cab control system for wireless shut-off for 5 boom sections in lieu of standard 3-section
BRAVO180ARAG3
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 395.00
434.50
W
–
Bravo 180 auto rate controller with 3 boom sections for fully automatic spray rate control
3,750.00
4,125.00
W
–
BRAVO180ARAG5
Bravo 180 auto rate controller with 5 boom sections for fully automatic spray rate control
3,950.00
4,345.00
W
–
BTEF-TEEJET
12 volt fence line kit comes with B¼XP BoomJet
180.00
198.00
W
19
BTEF-TEEJETLH
As above for left hand side
180.00
198.00
W
19
GPS GUIDAnce
GPS Guidance unit for more accuracy in your field – does away with a foam marker.
ORDER CODE
DESCRIPTION
RV117-0171-429
Raven Cruizer GPS with Helix antenna – ready to go
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 3,790.00
4,169.00
W
66
Triplex nozzles ORDER CODE
DESCRIPTION
BT-TRIPLEX
Triplex nozzle bodies complete with AirMix Jets in sizes 110 #02, 025, 03. Price is per nozzle required on the selected boom
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 57.00
62.70
W
64
Pumps
Hydraulic pump drive for the 1100/1300/1600 litre linkage sprayer.
ORDER CODE
DESCRIPTION
LP-HYD
Hydraulic drive option for the pump in lieu of PTO drive – includes hydraulic hoses to the tractor
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST) $ (INC. GST) PROD. CAT. Page 1,395.00
1,534.50
W
35
Optima BUYERS’ GUIDE – JANUARY 2014
15
Section 1
BOOMS
MBX Manual Fold BOOMS NEW
Quick Guide »» Rugged, galvanised steel construction »» Nozzles are protected being placed above the boom rail »» Stainless steel boom tubes for added strength and durability »» Non-drip nozzles bodies with AirMix ® low-drift nozzles fitted
MBX4-1
MBX6-1
»» Adjustable tension spring breakaway for each boom arm to ensure the arm returns to position »» Folds neatly behind the sprayer or vehicle (not the MB02 which is fixed)
MBX6-1
MBX4-1
ORDER CODE
DESCRIPTION
MB02
One piece 2 metre boom with 4 non-drip nozzles at 500mm spacings
$ (EX. GST) 226.36
249.00
X
MBX03-1
3 metre galvanised boom; 6 non-drip nozzles at 500mm spacings. 1.2 metres folded width. Ideal for RTV’s, small sprayers and utes
599.09
659.00
X
MBX04-1
4 metre galvanised boom; 8 non-drip nozzles at 500mm spacings. 1.2 metres folded width. Ideal for RTV’s, small sprayers and utes
672.73
740.00
X
MBX06-1
6 metre galvanised boom; 12 non-drip nozzles at 500mm spacing. Suitable for linkage sprayers, vehicles and traymount sprayers
899.09
989.00
X
ATVBOOMKIT
Mounting kit to allow fitting of the MBX booms to vehicle trays and RTV’s
140.18
154.20
X
Manual folding Cropmaster BooMS Cropmaster MF08 boom shown folded (left) and open (below)
$ (INC. GST) PROD. CAT.
Quick Guide »» Galvanised steel construction »» Nozzles protection fitted to outer sections »» Stainless steel boom tubes for added strength and durability »» Non-drip nozzles bodies with AirMix ® low-drift nozzles fitted »» Adjustable tension spring breakaway for each boom arm »» Folds neatly behind the sprayer or vehicle
AirMix® low drift airinduction nozzles fitted as standard on all booms
ORDER CODE
DESCRIPTION
MF06
6 metre Cropmaster boom
$ (EX. GST) 1,230.00
$ (INC. GST) PROD. CAT. 1,353.00
X
MF08
8 metre Cropmaster boom
1,726.36
1,899.00
X
MF10
10 metre Cropmaster boom
1,954.55
2,150.00
X
MF12
12 metre Cropmaster boom
2,463.64
2,710.00
X
Booms shown on sprayers for illustration purposes only. Prices are for booms only.
16
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
BOOMS Section 1
Manual folding Acremaster BOOMS
Quick Guide »» Heavy duty galvanised steel construction »» Nozzles are protected being placed above the boom rail
AirMix® low drift air-induction nozzles fitted with nozzle protection as standard (not shown)
»» Non-drip nozzles bodies with AirMix ® low-drift nozzles fitted »» Adjustable tension spring breakaway for each boom arm »» Ideal boom for larger linkages and larger areas – a proven performer over many years
Acremaster MA10 boom shown folded (left) and open (below)
ORDER CODE
DESCRIPTION
MA10
10 metre galvanised Acremaster boom
2,950.00
3,245.00
X
MA12
12 metre galvanised Acremaster boom
2,995.45
3,295.00
X
Hydraulic folding GEX Booms AirMix® low drift air-induction nozzles fitted with nozzle protection as standard (not shown)
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Quick Guide »» Galvanised steel construction »» Nozzles protection fitted to outer sections »» Stainless steel boom tubes with nondrip nozzles bodies and AirMix ® lowdrift nozzles fitted »» Adjustable tension spring breakaway for each boom arm »» Boom folds hydraulically in a cross-fold style. Note: the 8 and 10 metre models have a manual flip-over outer section which needs to be manually secured in the folded position prior to folding the boom for transport »» Ideal boom for small row-cropping situations or vegetables
GEX10H boom shown folded (above) and open (left) ORDER CODE
DESCRIPTION
GEX6H
6 metre galvanised hydraulic folding boom; 12 non-drip nozzle bodies, 2 rams for folding, hydraulically plumbed to fold together.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
4,670.00
5,137.00
X
GEX8H
8 metre galvanised hydraulic folding boom; 16 non-drip nozzle bodies, 2 rams for folding, hydraulically plumbed to fold together. 1 metre of each end is manually unfolded to make the boom 8 metres.
5,930.00
6,523.00
X
GEX10H
10 metre galvanised hydraulic folding boom; 20 non-drip nozzle bodies, 2 rams for folding, hydraulically plumbed to fold together. 2 metres of each end is manually unfolded to make the boom 10 metres.
6,100.00
6,710.00
X
MHL12-2-KIT
Second set of hydraulic hoses to allow left/right individual fold of GEX boom (text on your order)
495.00
544.50
X
Booms shown on sprayers for illustration purposes only. Prices are for booms only.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
NEW
17
Section 1
BOOMS
Hydraulic Hydralink Booms
Quick Guide »» Heavy duty galvanised steel construction »» Nozzles protection fitted to protect nozzles and nozzle bodies from damage
AirMix® low drift air-induction nozzles fitted with nozzle protection as standard
»» Stainless steel boom tubes with nondrip nozzles bodies and AirMix ® lowdrift nozzles fitted
MHL15 boom shown folded (right) and open (below)
»» Adjustable tension breakaway on outer sections »» Self-leveling centre section standard »» Boom folds sequentially in a cross-fold style for transport – using the left/ right hydraulic kit option, each side can be lifted independently which also automatically locks the self-leveling system. Ideal for lifting over fences at the headland or irrigation sprinklers »» Ideal boom for small row-cropping, vegetables or undulating farm country
ORDER CODE
DESCRIPTION
MHL12
Heavy duty galvanised 12 metre hydraulic folding boom with 24 nozzles, twin ram with auto folding tips, hydraulically plumbed to fold both sides together. Central self-locking self-leveller standard
$ (EX. GST)
$ (INC. GST) PROD. CAT.
8,550.00
9,405.00
X
MHL15
Heavy duty galvanised 15 metre hydraulic folding boom with 30 nozzles, twin ram with auto folding tips, hydraulically plumbed to fold both sides together. Central self-locking self-leveller standard
9,650.00
1,0615.00
X
MHL12-2-KIT
Second set of hydraulic hoses to allow left/right individual fold of MHL boom
495.00
544.50
X
NEW
Booms shown on sprayers for illustration purposes only. Prices are for booms only.
BDU Booms
Quick Guide »» Heavy duty epoxy-painted steel construction »» Nozzles and nozzle bodies protected to avoid accidental breakage during spraying »» Stainless steel boom tubes with nondrip nozzles bodies and AirMix ® lowdrift nozzles fitted »» Adjustable tension breakaway on outer sections »» Self-leveling centre section standard »» Boom folds sequentially in a concertina style for transport – using the left/right hydraulic kit option, each side can be folded independently »» Ideal boom for larger areas – note: only suitable for fitting to Croplands MEC 1100/1300. Hydraulic height adjustment is highly recommended and airbag suspension for rougher country
BDU18
18
ORDER CODE
DESCRIPTION
BDU18
18 metre BDU series concertina-fold powder-coated boom, fully hydraulic fold with individual left and right fold options. Self-locking self levelling device. Includes a 1,200mm lift device as part of the package. Requires 2 sets remotes – one for lift, a second set with an electric diverter valve (supplied) for operating the tilt ram and fold function
BDU18-4-KIT
Extra electric/hydraulic function with in-cab switchbox for individual left/right boom folding
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
14,955.00
16,450.50
W
500.00
550.00
W
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
BOOMS Section 1
Firebreak, Under tree and covered booms
Quick Guide Firebreak boom: »» Ideal for the back of utes or small trailing sprayers »» 1.5 metre wide with offset nozzles on adjustable swivel nozzle bodies on each end for additional 1.5 metre spray each side »» For spraying firebreaks, farm tracks, contours, ditches and fencelines Under-tree boom: MSO
»» Galvanised boom with breakaway – extendable outer section with 2 nozzles, can be lifted up for transport
MC6 Firebreak Boom shown fitted to tray
»» Perfect for spraying under trees or hedgerows
MSCL-2 shown wide
Shrouded booms:
3 metres
»» Single or double sided options for sensitive areas »» For spraying under sensitive crops such as grapes, trellis tomatoes and the like
MSCL-2 shown narrow 2.3 metres ORDER CODE
DESCRIPTION
MC6
1.5 metre wide firebreak boom. For more information see page 28
$ (EX. GST) 426.36
469.00
X
MSO
Treeliner boom with breakaway and 2 nozzles with manual-tap shut-off
470.00
517.00
X
MSCL
Single sided light covered boom with breakaway and 2 nozzles under spray shield
495.45
545.00
X
MSCL-2
Double sided light covered boom with left/right shielded booms with breakaways, adjustable width, and a 600mm wide uncovered centre section with 2 nozzles
1,410.00
1,551.00
X
MSCL-BRUSH
Brush kit to suit MSCL boom. 2 required for the MSCL-2. Price is for brush kit only, boom price must be added
200.00
220.00
X
Wheely Boom
$ (INC. GST) PROD. CAT.
Quick Guide »» Ideally suited for greens, golf courses and turf applications »» Handle includes a shut-off gun and gauge for the operator to control the application as required »» Ideal to hook up to an existing spray pump for spraying greens
ORDER CODE
DESCRIPTION
MW02
2 metre width boom with frame and wheels, shut-off gun and gauge
$ (EX. GST) 930.00
OPTIONS
$ (INC. GST) PROD. CAT. 1023.00
X
BOFLS
Fenceline nozzle kits
For spraying around fencelines or drains from the end of a boom, choose from a manual-tap or electric fenceline nozzle kit.
ORDER CODE
DESCRIPTION
BOFLS
Adjustable boom end nozzle with manual shut-off for fenceline spraying
$ (EX. GST)
$ (INC. GST) PROD. CAT.
98.88
108.76
X
BTEF-TEEJET
12 volt fence line kit comes with B¼XP BoomJet, 400mm of wiring. To suit ½” boom tube. (RH side)
180.00
198.00
X
BTEF-TEEJETLH
As above for left hand side
180.00
198.00
X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
BTEF-TeeJet
Optima BUYERS’ GUIDE – JANUARY 2014
19
Section 1
Trailed sprayers
300 Trailed Sprayer
Quick Guide »» Translucent UV-stabilised tank with large sump and graduated markings
NEW
»» 10 metre hose with high quality spray lance »» Large, easy access lid with filling strainer »» 12 volt pump, matched to the application, with easy access suction filter and regulator for flow adjustment »» Safety hitch for safe towing »» Flotation tyres on sturdy axle »» Rugged, one-piece chassis »» Handy parking stand On models with a boom fitted:
UA300/8/2B
»» AirMix ® air-induction low drift nozzles fitted standard »» Fully protected non-drip nozzle bodies on stainless steel boom tubes »» Spring-loaded breakaways to protect boom arms from accidental impact damage (except model with 2 metre boom which is fixed)
Boomless nozzle kit during application
UA300/15/XPKIT
NEW
AirMix® low drift air-induction nozzles fitted with nozzle protection as standard (not shown)
UA300/15/4B
20
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Trailed sprayers
Croplands trailed 300 litre sprayers are a very popular option for block-holders and small farms all over Australia and New Zealand. Models include our 12 volt range with or without a boom, and the motorised versions with an AR diaphragm pump for spot spraying, nursery use and for use with the Vertiboom on small vineyards. The sturdy frame has a tow-hitch fitted. Boom options Vertiboom which can be fitted using a motorised pump (AR30-5H) fitted on the drawbar with the boom rear mounted
Another useful option on the UA300 trailed is the double-sided covered boom for use in small vineyards. The boom is fitted to the rear of the US300 trailed using a 20 L/min 12 volt pump
UA300/20/HR30G
NEW
UA300/20S/6B ORDER CODE
DESCRIPTION
UA300 UA300/15
PROD. CAT.
Accessories Page Ref
$ (EX. GST)
$ (INC. GST)
Trailer with hitch and 300 litre tank only – no pump, boom or gun
2,024.55
2,227.00
X
–
Trailing 300 litre sprayer: 15 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance and hose holder – ideal spot sprayer
2,490.00
2,739.00
X
27
UA300/8/2B
Trailing 300 litre sprayer: 7.6 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, 2 metre fixed boom
2,635.45
2,899.00
X
27
UA300/15/4B
Trailing 300 litre sprayer: 15 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, 4 metre MBX boom
3,327.27
3,660.00
X
27
UA300/20S/6B
Trailing 300 litre sprayer: 20 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, 6 metre MBX boom
3,660.00
4,026.00
X
27
UA300/20S/ MSCL-2
Trailing 300 litre sprayer: 20 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, MSCL-2 covered boom fitted
4,130.00
4,543.00
X
27
UA300/15/XPKIT
Trailing 300 litre sprayer; 15 L/min 12 volt pump, regulator kit, 10 metres of 10mm hose with lance and hose holder, XP boom kit with left and right XP BoomJets (#10 size) fitted
2,924.55
3,217.00
X
27
UA300/20/HR30G
Honda powered AR252 pump fitted on the front of trailed 300 litre sprayer with 30 metres of 10mm hose on steel hose reel and RL10 spray lance
4,044.55
4,449.00
X
–
UA300/20/100RC
Honda powered AR252 pump fitted on the front of trailed 300 litre sprayer with RetraSpray remote control reel fitted
6,100.00
6,710.00
X
–
UA300/30/MVB4-4
Trailing 300 litre sprayer with Honda GX200 powered AR30 pump (0–40 bar) and 4-nozzle per side Vertiboom. Ideal for small horticultural growers
4,470.00
4,917.00
X
–
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
21
Section 1
Trailed sprayers
1100 | 1500 pony Trailed Sprayers
Quick Guide »» Remote tank drain valve, for safe tank draining »» Huge sump to ensure all tank liquid can be utilised »» Large, easy access filling lid with filling strainer »» Easy access suction filter with shut-off to allow cleaning in-field if needed »» Suction probe for safe chemical induction from the ground »» Fully galvanised chassis provides superior protection for today’s agricultural environment »» Sprung axle fitted to protect chassis and boom from premature wear »» 11.5/80 x 15.3 tubeless agricultural tyres on steel rims »» Adjustable height swivel towing eye »» Large side step for easy tank access »» Liquid fertiliser ready Poly 3-diaphragm pump fitted standard (PTO shaft supplied)
BT-1100 shown with MA10 boom and electic controller options
»» Options include a range of booms (next page), foam marker, electric or auto rate spray controls, hydraulic boom lift device, airbag boom suspension, Honda-powered motorised pumps
Specifications
22
ORDER CODE
DESCRIPTION
BT-1100 BT-1500
Tank
Translucent white UV stabilised tank with calibrated markings. Large, hinged filling lid with basket strainer. Venturi and bypass agitation. 20 litre handwash tank fitted
Chassis
Galvanised one-piece box-section multi-rail chassis with adjustable and swivel tow-hitch. Step provided for top fill access
Booms (optional)
Up to 12 metres, fully galvanised with single non-drip nozzle bodies and AirMix Air-induction nozzles fitted
Filtration
Triple filtration – lid strainer, suction filter, nozzle filters (and pressure filter with electric controls)
Wheels
11.5/80 x 15.3 tubeless tyres on steel rims, spring axle fitted as standard
Pumps
Standard AR80 (80 L/min, 0–20 bar) oil-bath triple-diaphragm pump, PTO drive. Other options, page 23
Controls
Standard with ARUCM manual 4 way pressure relief valve with pressure adjustment and master on/off lever. Optional electric controls see page 23
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
Pony trailed sprayer; 1100 litre tank, galvanised chassis, leaf-spring single axle, AR80 PTO driven triple-diaphragm pump (0–20 bar), ARUCM 4 tap manual control unit, 20 litre handwash tank and suction probe. (NO boom fitted)
8,620.00
9,482.00
X
As above, but with 1500 litre tank
8,910.00
9,801.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Trailed sprayers
Options
Raven Cruizer GPS
Foam marker
AR140LFP Poly pump
Airbag suspension
1,200mm hydraulic lift device
Wireless electric control
Booms
A full range of galvanised booms can be fitted to the Pony
ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
Page
BT-MF08
8 metre Cropmaster boom
1,726.36
1,899.00
X
16
BT-MF10
10 metre Cropmaster
1,954.55
2,150.00
X
16
BT-MF12
12 metre Cropmaster boom
2,463.64
2,710.00
X
16
BT-MA10
10 metre Acremaster boom
2,950.00
3,245.00
X
17
BT-MA12
12 metre Acremaster boom
2,995.45
3,295.00
X
17
BTGEX6H
6 metre GEX series hydraulic fold boom
4,670.00
5,137.00
X
17
BTGEX8H
8 metre GEX series hydraulic fold
5,930.00
6,523.00
X
17
BTGEX10H
10 metre GEX series hydraulic fold
6,100.00
6,710.00
X
17
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
Page
308.00
338.00
X
34
1,949.00
2,143.90
X
34
Pump options ORDER CODE
DESCRIPTION
BT-AR140LFP-C
AR140 pump in lieu of AR80 pump (PTO drive)
BT-AR70-5H
AR70 Honda powered motorised pump in lieu of AR80 PTO-drive
Lift devices and airbag suspension ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
Page
BT-GB380599000V
Self-levelling device with manual lock for Acremaster and GEX series booms. A useful option for undulating ground
1,400.00
1,540.00
X
–
BT-HYDHGT800
800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor. Includes support struts to chassis. Suitable for MF series booms
2,790.00
3,069.00
X
–
BT-HYDHGT
(Previous code BT-GB350196000V) 1,200mm hydraulic boom height adjuster with side support struts and hydraulic hose kit for adjusting boom height from the tractor. Suitable for Acremaster (MA) series booms
2,990.00
3,289.00
X
–
BT-GB383899000V
Single airbag suspension for Acremaster 10 and 12 metre booms. Ideal for rougher country
2,090.91
2,300.00
X
–
Electric controls, spray rate controllers, foam marker and GPS options ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
Page
A5200052
Double sided foam marker fitted
1,240.00
1,264.00
X
32
LT-LA-IE2032W
3-section remote in-cab control system for wireless shut-off for 3 boom sections
1,930.00
2,123.00
X
66
MTSMATE-ARAG3
3-section auto rate controller for control of 3 boom sections with automatic spray rate control of application rate using flow and speed inputs from the sprayer
4,120.00
4,532.00
X
67
BRAVO180-ARAG3
Bravo 180 auto rate controller with 3 boom sections for fully automatic spray rate control
4,720.00
5,192.00
X
67
BRAVO180-ARAG5
Bravo 180 auto rate controller with 5 boom sections for fully automatic spray rate control
4,920.00
5,412.00
X
–
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
23
Section 1
12 volt sprayers
30 | 60 | 100 CropPak 6
4 8
3
10 2
Feature
Benefit
1 Cavity mounted pump
Total protection against the elements and damage. Low pump position ensures excellent priming
2 Translucent tank
Easy to see liquid level in the tank
2 Rugged design, locally made
Rotomolded tank has uniform thickness and can take high impact force
2 UV stabilised tank
Excellent UV resistance. Many imported models have no UV inhibitor in the material
3 Large carry handles
Easy handling and for storing hose neatly
4 Lance clips onto lid
Ensures neat storage and avoids lance dragging on the ground
4 Large filling lid
Helps prevent spillage when filling
7
5 Large suction filter, Very large filtering area with easyclean filter screen. Simple and easy access quick to access
1
6 3-stage filtration
Large filling screen under lid; large suction filter; pressure filter in lance handle
7 Quick-clip power connection
High quality electrical connector to the pump with waterproof plug for quick hook up and reliability
8 Metal lance with adjustable nozzle
Superior to plastic, higher strength. Many accessories available to fit the lance – page 48
9 Large drain
Easy-to-use, large ‘boat plug’ drain for quick clean-out
10 6 metre hose
6 metres of high quality 20 bar rated spray hose fitted
Heavy-duty power cable
Long, heavy-duty 12 volt power lead with rocker-switch for easy hook-up to your battery
US60
5
9
Did you know? The lance fitted to all Croplands CropPak sprayers can be fitted to a huge range of accessories such as small booms, spray guards, extendable lances, long lances – check out the range on page 48 to see these options.
US100A US60
US30A 30/60/100 litre CropPak sprayers – completely redesigned for 2014 with many improvements to better suit the Australian and New Zealand market. Small details make a big difference to the performance of these sprayers, especially compared to the large number of imported units on the market. Compare the features above and you will find these CropPaks excellent value for money and will last for years if looked after. On page 27 you will find a wide range of accessories available for use with the standard lance to make your purchase of a Croplands CropPak a worthwhile investment. Please ensure your vehicle’s load rating can carry the sprayer you want before making your purchase.
24
ORDER CODE
DESCRIPTION
US30A
PROD. CAT.
Accessories Page Ref
435.00
X
27
495.45
545.00
X
27
550.00
605.00
X
27
650.00
715.00
X
27
$ (EX. GST)
$ (INC. GST)
30 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch
395.45
US60
60 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch
US100A
100 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch
US100A/15
100 litre CropPak, on-demand 15 L/min open-flow pump, pressure regulator and gauge, 6 metres of spray hose, spray lance and electrical power lead with on/off switch
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
12 volt sprayers
40 APEX CropPak
Quick Guide
Integrated measuring jug
»» 40 litre tank »» 4 metre hose »» 3 L/min pump with protection cover »» Heavy duty power cable »» On/off pump switch »» Integrated measuring jug »» Large filling lid
NEW ORDER CODE
DESCRIPTION
ASATV-10
40 litre Apex CropPak sprayer, 4 metres hose, protected pump with on/off switch, measuring jug, heavy duty powercable
200 | 400 CropPak 7
9
5 4
6
8
$ (EX. GST)
$ (INC. GST)
271.82
299.00
PROD. CAT. Y
Feature
Benefit
1 Baffled tank
Integrated baffles to avoid sudden liquid movement
2 Graduated, translucent tank
Easy to see liquid level in the tank with level marks
2 Rugged design, locally made
Rotomolded tank has uniform thickness and can take high impact force
2 UV stabilised tank
Excellent UV resistance. Many imported models have no UV inhibitor in the material
Quick Guide Ensures safe handling
3 Carry handles
2
»» These flat-based 200/400 units 4 Lance clips Ensures neat litre storage and avoids lance on the ground are a great choice fordragging a higher onto lid
capacity utility sprayer. Helps prevent spillage when filling
4 Large filling lid
»» They will sit on a ute tray, RTV tray,
5 Handy suction Easy-clean filter screen. Simple tractor tray or trailer. and quick to access filter, easy access
»» The clever design includes cutaways Large filling screen under lid; in the tank to provide to avoid suctionbaffles filter; pressure filter in sudden liquid movement – a must if lance handle being used on sloping country.
3
1
6 3-stage filtration
US200/15
7 Metal lance with Superior to plastic, higher accessories adjustable nozzle »» There are severalstrength. modelsMany available to cater for differentavailable uses. to fit the lance – page 21
Did you know? New for 2014 is a higher pressure 200 litre model ideal for spot spraying woody weeds and for pest control around buildings.
200 and 400 litre CropPaks – These flat-based 200/400 litre units are a great choice for a higher capacity utility sprayer. They will sit on a ute tray, RTV tray, tractor tray or trailer. The clever design includes cutaways in the tank to provide baffles to avoid sudden liquid movement – a must if being used on sloping country. There are several models available to cater for different uses.
8 6 metre hose
6 metres of high quality 20 bar rated spray hose fitted
9 Hose holders mounted on tank
To wrap hose around to avoid tangles and dragging hose
Heavy-duty power cable
Long, heavy-duty 12 volt power lead with rocker-switch for easy hook-up to your battery
Quick-clip power connection
High quality electrical connector to the pump with waterproof plug for quick hook up and reliability
PROD. CAT.
Accessories Page Ref
910.00
X
27
1050.00
1155.00
X
27
200 litre CropPak, on-demand 5.5 L/min high pressure open-flow pump, 6 metres of spray hose, RL10 gun and electrical power lead with on/off switch
1,100.00
1,210.00
X
27
(Not pictured) 400 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjusting regulator fitted, 6 metres hose and adjustable spray lance. Accessories available such as small booms – see page reference at right
1410.00
1551.00
X
27
ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
US200
200 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch
827.27
US200/15
200 litre CropPak, on-demand 15 L/min open-flow pump, pressure regulator and gauge. 3-way valve enables connection to a boom. 6 metres of spray hose standard with spray lance. Electrical power lead with on/off switch provided
US200/5.5HP (NEW) US400/15
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
25
Section 1
12 Volt sprayers
70 Litre ATV Sprayer
Quick Guide »» Wrap-around tank for low centre of gravity »» Large filling lid with strainer »» Handy tool box with lid »» High quality wiring loom with rugged waterproof connectors and integrated on/off rocker switch »» 6 metres spray hose supplied »» High quality spray lance with adjustable nozzle »» Full range of accessories for spray lance – see page 27
UM70 shown mounted on quad bike.
PROD. CAT.
Accessories Page Ref
572.00
X
27
720.00
792.00
X
27
70 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjustment regulator fitted, large filling lid, 6metre hose and adjustable spray lance and 3 metre boom kit
1,563.64
1,720.00
X
27
70 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjustment regulator fitted, large filling lid, 6metre hose and adjustable spray lance and 4 metre boom kit
1,595.45
1,755.00
X
27
ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
UM70
70 litre CropPak, 12 volt on-demand 7.6 L/min Triplex pump, large filling lid, 6 metre hose and adjustable spray lance
520.00
UM70/15
70 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjustment regulator fitted, large filling lid, 6 metre hose and adjustable spray lance, pre-plumbed for boom
UM70/15/3B UM70/15/4B
30 Litre Apex Trolley Sprayer
Quick Guide »» 3 L/min (open flow) 12 volt diaphragm pump powered by a large lead/acid rechargeable battery (charger included) »» Large filling lid »» Large drain for emptying and complete cleanout »» Spray lance with adjustable nozzle
ORDER CODE
DESCRIPTION
AT-30M3
30 litre trolley sprayer with 3 L/min pump (open-flow), 10 metre hose and Reel
$ (EX. GST) 362.73
$ (INC. GST) PROD. CAT. 399.00
50 Litre Greens Model
Y
»» 10 metres of hose on handy rearmounted reel »» Sturdy steel frame
Quick Guide »» Battery included »» This little beauty has a 2 metre boom and comes with non-drip nozzle bodies and nozzles »» 10 metres of hose and a lance »» Lance and boom all operated with a 12 volt pump from the battery supplied »» 3 wheels provide excellent manoeuvrability for turf or bowling green spraying
26
ORDER CODE
DESCRIPTION
UW50/2B
Three-wheeled greens sprayer, 50 litre, 12 volt on-demand 7.6 L/min Triplex pump, large filling lid, 10 metre hose, adjustable spray lance and 2 metre boom. Includes battery
www.croplands.com.au
$ (EX. GST)
$ (INC. GST)
2,086.36
2,295.00
PROD. CAT. X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
12 Volt sprayers
12 volt sprayer options XP Boomkit XP BoomKit – kit for clamping to rear of quad bike or linkage sprayer to mount boomless nozzles*. XP BoomJets need to be purchased separately and fitted to the XP BoomKit. Ensure you order the correct size of XP BoomJet to match the flow capability of your pump. As a guide, the size 10 (B¼XP10L or R-VP) is the only suitable size for 12 volt Flojet pump applications.
XP BoomKit with XP BoomJets* fitted, shown mounted on quad bike. Approximate spray width of 6 metres. *Nozzles sold separately.
See page 96 for details and pricing on XP BoomJets.
ORDER CODE
DESCRIPTION
XPBOOMKIT
Kit to mount 2 XP BoomJets* for a sprayed width of approximately 6 metres. Minimum pump flow required 6.4 L/min at 2 bar pressure. Clamps supplied for fitting to rear carrier of most quad bikes *NOTE: XP BoomJets NOT included. See page 56 to select ¼” XP BoomJet to suit
$ (EX. GST) 99.09
$ (INC. GST) PROD. CAT. 109.00
X
Pressure regulator kit ORDER CODE
DESCRIPTION
UOPRK
Pressure regulator kit for use with most 12 volt pumps such as Flojet and Shurflo. Ideal for regulating pressure and flow when a small spray boom is being used
$ (EX. GST) 99.96
$ (INC. GST) PROD. CAT. 109.95
X
Boom mounting kit
To mount a boom to a ute-tray, RTV vehicle or similar, a boom mount kit is available to suit the MBX 3 and 4 metre booms. Kit includes brackets, bolts and u-clamps to suit. Ideal for use with our CropPak models such as the US100A/15 or US200/15 that have the larger pump fitted.
ORDER CODE
DESCRIPTION
ATVBOOMKIT
Mounting kit for 3 and 4 metre MBX series booms. Only suitable for CropPaks with larger 15/17.5 or 20 L/min (open-flow) 12 volt pumps.
$ (EX. GST) 157.04
$ (INC. GST) PROD. CAT. 172.75
X
Spray Lance accessories for CropPaks
The Lance fitted to all 12 volt CropPak models (except the high pressure 5.5 model) can be hooked up to a very handy range of accessories SW219-151C
SW219-138C
SW219-148C
SW219-099
SW219-140C SW219-146C SW219-143C
ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
SW219-236C
Telescopic lance to 940mm, with adjustable nozzle
17.64
19.40
SW219-099
Herbicide spray guard, 400mm large
10.00
11.00
Y
SW219-117
Herbicide spray guard, 220mm small
7.36
8.10
Y
SW219-142C
Spray lance 1,000mm, plastic, including adjustable nozzle
17.73
19.50
Y
SW219-143C
Spray lance 1,500mm, plastic, including adjustable nozzle
22.82
25.10
Y
SW219-146C
Spray lance 2,000mm, plastic, including adjustable nozzle
28.27
31.10
Y
SW219-147C
Double “U” nozzle, plastic
17.00
18.70
Y
SW219-140C
2-nozzle boom 500mm, plastic
19.91
21.90
Y
SW219-148C
2-nozzle boom, 750mm, plastic
23.36
25.70
Y
SW219-138C
3-nozzle boom 1,000mm, plastic
27.64
30.40
Y
SW219-151C
3-nozzle boom 1,500mm, plastic
32.73
36.00
Y
SW219-282C
4-nozzle boom 1,500mm, plastic
43.36
47.70
Y
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
Y
27
Section 1
Tray-mount
200 | 400 Tray-mount
Quick Guide
(no frame)
»» Baffled tank to avoid sudden shift of liquids »» Flat base for use on a vehicle tray, tractor tray or trailer »» Large drain for easy flushing »» Genuine Honda motor to power the reliable AR diaphragm pump »» Steel hose reel with galvanised mount, 30 metres of high quality hose and Turbo 400 gun
US400/30/HR30TG
Pictured above: A typical set up for the US200/20/HR16G with an optional RTV boom kit and 4 metre MBX boom fitted. At right (top): The same unit in action spraying with the boom. At right (bottom): The US200/20/HR16G fitted with a firebreak boom showing the available spray pattern options using the left, centre and right configurations – ideal for firebreaks, tracks, contours, fencelines, driveways, around yards and also turf applications. ORDER CODE
28
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
US200/20/HR16G
CropPak 200 with GX120 Honda-powered AR252 pump, retractable reel, 16 metre hose and RL10 gun
2,890.00
3,179.00
X
US400/30/HR30TG
CropPak 400 with AR30 0–40 bar pump, reel with 30 metres of 10mm hose and Turbo 400 gun
3,880.00
4,268.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Tray-mount Section 1
500 tray-mount
(with frame)
NEW
Quick Guide »» Heavy duty hot-dip galvanised frame with carry handles »» Round, UV-stabilised tank with level markings »» Large filling lid with basket strainer »» Large sump for total emptying and easy draining and cleanout »» Genuine Honda motor to power the reliable AR diaphragm pump »» Steel hose reel with galvanised mount, 30 metres of high quality hose and Turbo 400 gun
US500/30/HR30TG
US500/30/100RC
»» 12 volt remote rewind reel option for effortless spraying and high productivity »» For weed spraying, sheep jetting, firefighting, water carting and pest control »» Optional boom mount and booms for AR70 model (up to 10 metre) »» Dimensions: W = 1,075mm L = 1,650mm H (to top of tank) = 1,020mm
US500/30/TWIN ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
US500/30/HR30TG
CropPak 500 litre, AR30 pump, reel with 30 metre hose and Turbo Gun, galvanised skid-frame
4,350.00
4,785.00
X
US500/30/TWIN
US500/30/HR30TG as above, with twin reels
4,850.00
5,335.00
X
US500/30/100RC
CropPak 500 litre, comes with RetraSpray RSRL-100RC reel (see page 31)
6,032.00
6,635.20
X
US500/70/HR30TG
CropPak 500 litre, AR70 pump, reel with 30 metre hose and Turbo Gun, galvanised skid-frame. AR 70 pump is ideal for use with a range of booms – see page reference at right for options on how to mount a boom to your vehicle tray
4,350.00
4,785.00
X
CropMister 500
Quick Guide »» Honda GX160 (3.6kW) powered AR252 (25 L/min) pump »» Galvanised frame »» Misting fan »» The Cropmister is fitted with belts and clutch to allow the mister to be operated independently of the pump. »» This unit can be used with the fan engaged for misting operations, or disengaged for spot spraying or firefighting applications. »» Ideal for insecticide application for control of locusts, red-legged earth mite and similar insect pests. »» Electric actuator on the spray outlet included.
All models BSM500/20 ORDER CODE
DESCRIPTION
BSM500/20
Cropmister 500 litre on skid-frame, comes with 25 L/min pump, misting fan and electric actuator adjustment
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST)
6,950.00
7,645.00
Optima BUYERS’ GUIDE – JANUARY 2014
PROD. CAT. X
29
Section 1
tray-mount
1100 | 1500 Tray-mount
Quick Guide
Croplands has designed, and will have available in April 2014, a new range of tray-mount sprayers for small trucks capable of carrying between 1200kg and 2 tonnes. This new range has been designed to carry the tank across the tray to keep weight roughly in the vehicle centre (near the cab), whilst allowing sufficient space at the rear for boom brackets to extend over the rear of the tray along with a platform for a pump, spray reels and other accessories. The frame will be galvanised steel with forklift guides on the sides to allow for mounting and demounting.
»» Galvanised chassis »» Oval tank for excellent product agitation »» Large sump to allow full draining »» Platform for pumps, reels and accessories »» Forklift points with guides »» Options include boom mounting for suitable booms, foam markers, electric controls, flushing tank and remote rewind RetraSpray reels
NEW Availabe in April 2014
ORDER CODE
DESCRIPTION
US1100/30 US1500/30
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
Base model 1100 litre tray-mount sprayer with galvanised chassis, pump/reel platform, AR30 motorised pump powered by GX200 Honda (manual start) – no reel, boom or accessories fitted
5,590.00
6,149.00
X
Base model 1500 litre tray-mount sprayer with galvanised chassis, pump/reel platform, AR30 motorised pump (manual start) – no reel, boom or accessories fitted
5,950.00
6,545.00
X
$ (EX. GST)
$ (INC. GST)
Accessories and options
ORDER CODE
30
DESCRIPTION
PROD. CAT.
RSRL-100RC
Remote rewind RetraSpray reel with a 100 metre hose and Turbo 400 gun (up to two can be fitted on the platform) (each)
2,195.00
2,414.50
X
L-R1412
Manual hose reel, 30 metres hose, Turbo 400 gun
616.36
678.00
X
AR70-5H
AR70 motorised pump powered by GX200 Honda (manual start) in lieu of AR30 (more suited if a boom is fitted)
100.00
110.00
X
AR-ES
Electric start for GX200 Honda for AR70 or AR30 pump
675.00
742.50
X
USBOOMBRKT
Sliding boom bracket to extend over vehicle tray (slides into platform at rear)
850.00
935.00
X
LT-20
20 litre hand-wash tank fitted
275.00
302.40
X
MF06
6 metre rear manual folding boom
1,230.00
1,353.00
X
MF08
8 metre rear manual folding boom
1,726.26
1,899.00
X
MF10
10 metre rear manual folding boom
1,954.55
2,150.00
X
BT-LIGHTS
Light kit for boom
700.00
770.00
X
A520052
Foam marker, fitted
1,240.00
1,364.00
X
LT-LA-IE2032W
3-section remote in-cab control system for wireless shut-off for 3 boom sections when boom is fitted (only suitable if AR70-5H is fitted)
1,930.00
2,123.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 1
Retractable Reel Sprayers
Quick Guide Croplands RetraSpray 12 volt retractable reel will take all the work out of gun spraying. The time and effort saved is well worth the investment – up to 40% more productivity can be expected with the operator not having to lug a heavy hose around or to rewind over 100 kilos of hose up by hand when making a move to a new area. The Supa-slip hose on the reel will slip around rocks, tree stumps, posts and any other obstacle without snagging. Do yourself a favour and invest now.
RetraSpray Reel
12 Volt Retractable Reels »» 12 volt 1/5HP low rev motor directly coupled to the reel »» Push button hose retraction standard, remote control for rewinding is optional »» Spray Gun not included, select from gun options below or supply your own from your existing rig
B26.901.165MK2
»» Connect to 12 volt DC power source using heavy duty power cable supplied »» Remote control option includes roller guides for hose and remote wireless control for rewinding
Choose your gun and add to your order
RetraSpray 100 »» GX120 Honda motor with 3 year Honda warranty »» AR252 twin diaphragm 25 bar, 25 L/min pump
RL10
»» Pressure controller and pressure gauge »» Reel as described above RetraSpray 160 »» GX160 Honda motor with 3 year Honda warranty »» AR30 twin diaphragm 40 bar, 32 L/min pump »» Pressure controller and pressure gauge
RSRL-100RC
»» Reel as described above
RS100-300-100RC
ORDER CODE
RS160-500T100RC
US500/30/100RC
DESCRIPTION
RSRL-100RC
RetraSpray single reel with 100 metre hose and remote control
B26.901.165MK2
Turbo 400 with metal grip and protected lever, 50 bar (725 psi), suits 160 model
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
2,195.00
2,414.50
F
160.71
176.78
Z Z
RL10
RL10 gun with 500mm steel lance, adjustable nozzle, suits 100 model
78.65
86.52
RS100-300-100RC
300 litre tank, 25 L/min pump, Honda GX120 motor, retractable reel with 100 metre hose and remote control kit
5,895.00
6,484.50
F
RS100-500-100RC
500 litre tank, 25 L/min pump, Honda GX120 motor, retractable reel with 100 metre hose and remote control kit
6,120.00
6,732.00
F
RS160-300-100RC
300 litre tank, 35 L/min pump, Honda GX160 motor, retractable reel with 100 metre hose and remote control kit
6,900.00
7,590.00
F
RS160-500-100RC
500 litre tank, 35 L/min pump, Honda GX160 motor, retractable reel with 100 metre hose and remote control kit
7,160.00
7,876.00
F
RS160-500T100RC
500 litre tank, 35 L/min pump, Honda GX160 motor, twin retractable reels with 100 metre hose and remote control kits
8,995.00
9,894.50
F
US500/30/100RC
CropPak 500 litre, comes with RetraSpray RSRL-100RC reel (see above)
6,032.00
6,635.20
X
Note: Guns sold separately. See above.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
31
Section 1
Chemical Handling
Chemical mixers
Quick Guide Chem-e-flush 30 litre »» Ideal for linkage and small trailed sprayers »» Fully enclosed with rinsing nozzles for flushing containers and the mixer internally Chem-e-flush 60 litre »» Used on larger linkage sprayers and trailed sprayers »» Fully enclosed with rinsing nozzles for flushing containers and the mixer internally »» Mix safely and use the spray pump to activate fast-suction venturi
A5032130 ORDER CODE
L-H9351A DESCRIPTION
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
A5032130
30 litre Chem-e-flush. Note – plumbing will be required to make the mixer work for your sprayer
1,395.00
1,534.50
L-H9351A
60 litre Chem-e-flush. Note – plumbing will be required to make the mixer work for your sprayer
1,499.84
1,649.95
X
LP-137A
Fixed bracket to mount 30 litre Chem-e-flush on linkage sprayers (2 required)
46.62
51.28
X
LP-9356-KIT
Fixed bracket to mount 60 litre Chem-e-flush on linkage sprayers
229.00
251.90
X
L-H9355A
Spring loaded drop-down bracket for 60 litre Chem-e-flush. Ideal for trailed sprayers
873.93
961.32
X
X
Foam marker and foam concentrate
A5200052 (kit includes foam droppers)
L-M9020
ORDER CODE
DESCRIPTION
A5200052
Double-sided foam marker kit with in-cab switchbox for use on booms up to approximately 18 metres (depending on speed of travel)
$ (EX. GST)
L-M9020
High Expansion Spraymate premium foam, white, 20 litres
L-M9010
High Expansion Spraymate premium foam concentrate, white, 5 litres
$ (INC. GST) PROD. CAT.
1,240.00
1.364.00
X
180.91
199.00
X
70.64
77.70
X
Foam marker Spare Parts
32
ORDER CODE
DESCRIPTION
FM-COMP
Compressor to suit SAL901654, SAL901658 and ARAG foam marker
430.00
473.00
X
FM-COMP2
Thomas compressor to suit R-M2012 foam marker model
615.00
676.50
X
SAL901078.01
24 litre foam tank (not pictured)
171.48
188.63
Y
SAL901624-2
Cap with tube and fittings for foam marker tank
117.75
129.53
Y
A520004.260
Foam boot assembly, long
108.90
119.79
Y
A520004.261
Foam boot assembly, short
86.90
95.60
Y
RHAA120
Foam boot assembly to fit R-M2012 model
144.93
159.42
Y
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
FM-COMP
SAL901624-2
A520004.261
RHAA120
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Diaphragm pumps��������������� 34
Pressure Relief Valves�������� 40
Low Pressure Pumps��������������������34
Manual Control Valves/Regulators����������������������40
AR Hydraulic Drive Kits���������������35 Medium and High Pressure����������36
Centrifugal Pumps������������� 41
Pressure Relief Valves������������������40
AR Motorised Positive Displacement Pumps�������������������38
12v Pumps���������������������������� 42
Knapsack sprayers������������ 46
Flojet Pumps �����������������������������42
Industrial Range�������������������������47
Shurflo Pumps����������������������������44
Agricultural Range����������������������47
Apex 12 Volt Pumps�������������������45
Apex Sprayers���������������������������50
DIESEL ADBLUE UNITS������������� 52
Safety with Chemical Handling����������������������������� 58 Kasco Helmet/Respirator and Filters���������������������������������58 Chemical Transfer����������������������58
Spray guns, hoses and accessories������������������������� 56
Measuring Jugs��������������������������59
Hosereels����������������������������������57
Tank and Equipment Cleaner and Protectant���������������������������59
Spreaders���������������������������� 54
Pressure Gauges������������������������57
Spraysuits and Gloves����������������59
Firefighters������������������������� 60
Grain storage and hay baling applications����������� 61
Spray tanks������������������������� 62
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
33
Section 2
DIAPHRAGM PUMPS
Low Pressure Pumps up to 20 Bar The Annovi Reverberi (AR) range of diaphragm pups have been industry leaders for more than 60 years. Croplands have been fitting AR pumps to their entire sprayer range for 40 years, and supplying farmers and growers with these high quality pumps for the same duration. Rugged, reliable and robust, an AR pump will give years of good service if looked after and maintained. AR252
AR135 Bp
Ideal for small boom sprayers
Ideal for booms up to 18 metres
Available in
C
SP
T
CRGI
Available in
AR250 Bp
C
SP
T
CR
Ideal for booms up to 36 metres and above Available in
and EM
and EM Open flow
Open flow
25 L/min
132 L/min
Open flow
APCC CF25 CF32 254 L/min
Max pressure 25 Bar
Max pressure 20 Bar
Max pressure 20 Bar
Max RPM
650
Max RPM
550
Max RPM
550
Weight
4kg
Weight
15.5kg
Weight
38.5kg
HP required
1.45
HP required
6.8
HP required
11.4
Twin diaphragm, anodised alloy AR70 Bp Ideal for booms up to 10 metres Available in Open flow
Triple diaphragm, plastic coated heads, alloy casing
6-diaphragm, plastic coated heads, alloy casing
AR140LFP
AR280 Bp
C
SP
Ideal for booms up to 18 metres, for both liquid fertliser and general spraying
T
CR
Available in
72 L/min
Open flow
Max pressure 20 Bar
C
550
Max pressure 20 Bar
Weight
11.8kg
HP required
3.4
Max RPM
550
Weight
16kg
HP required
5.2
AR80LFP Ideal for booms up to 12 metres, for both liquid fertliser and general spraying Available in
C
Open flow
76 L/min
Max RPM
550
Weight
14kg
HP required
3.4
AR160 Bp
APCC CF25
Open flow
166 L/min
Ideal for booms up to 15 metres
Max RPM
550
Weight
38.5kg
HP required
12.9
AR330LFP* Ideal for very high applications, for both liquid fertliser and general spraying Available in
APCC CF32
550
Open flow
319 L/min
Weight
27.5kg
HP required
8.4
Max pressure 20 Bar
AR185 Bp
SP
Ideal for booms up to 36 metres
T
CR
Available in
APCC CF25
Open flow
182 L/min
Max RPM
550
Max RPM
550
Weight
27.5kg
Weight
15.5kg
HP required
9.3
HP required
5.5
4-diaphragm, plastic coated heads, alloy casing
550
Weight
60kg
HP required
17.4
AR410LFP* Ideal for very high applications, for both liquid fertliser and general spraying Available in
APCC CF32
Open flow
450 L/min
Max pressure 20 Bar
*Larger models (AR160 to AR280) have a choice of diaphragm material fitted. Pumps with a “D” in the part number are fitted with Desmopan (clear) diaphragms, those without the “D” in the part number are fitted with HPDS (high performance diaphragm material – black in colour). Desmopan diaphragms are mostly used in broadacre sprayers for boom-spraying as they have a better tolerance for modern formulations of products for that market. HPDS diaphragms are more flexible and perform better in horticultural sprayers especially with copper and sulphur-based formulations.
www.croplands.com.au
Max RPM
4-diaphragm, high pressure pump
Max pressure 20 Bar
Max pressure 20 Bar
Triple diaphragm, plastic coated heads, alloy casing
282 L/min
Max RPM
C
114 L/min
CF32
6-diaphragm, plastic coated heads, alloy casing
4-diaphragm, plastic coated heads, alloy casing
AR115 Bp
Open flow
Triple diaphragm, poly heads and manifolds
Available in
APCC CF25
Max pressure 20 Bar
Max pressure 20 Bar
Triple diaphragm, poly heads and manifolds
Available in
Open flow
Ideal for booms up to 24 metres
Max pressure 20 Bar
Ideal for booms up to 36 metres and above Available in
133 L/min
Max RPM
Twin diaphragm, plastic coated heads, alloy
34
For information on controllers to suit our pumps, refer to page 40. For common spare parts, refer to page 39.
Max RPM
550
Weight
78.5kg
HP required
22.4
4-diaphragm, poly heads and manifolds
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
DIAPHRAGM PUMPS
Drive options for AR PUmps C
Cardan Shaft – pump is fitted with a 1³∕8” male 6-spline shaft
APCC
Cardan Shaft – 1³∕8” 6-spline shaft both sides of pump
Csp
1³∕8” 6-spline shaft one side, bare shaft on the other
APC
CF25 CF32
Female input for direct hydraulic motor fitting. See below for hydraulic drive kits to suit pump models with CF25
T
Tractor Kit – to connect pump directly to tractor PTO shaft
SP
Bare Shaft – models to suit various kits and applications
CR
Gearbox fitted to pump but without PRV fitted
CRGI
Pricing for AR Low pressure pumps C
CR
Gearbox and PRV fitted to pump
For petrol and electric drive models, see following pages along with spare parts information.
CRGI
SP
T
APCC CF25 CF32
MODEL
Prod. Cat.
AR252
Y
627.27
690.00
–
–
950.00
1,045.00
563.64
620.00
809.09
890.09
–
–
AR70
Y
900.00
990.00
1,363.64
1,500.00
–
–
854.55
940.00
1,081.82
1,190.00
–
– –
$ $ $ $ (EX. GST) (INC. GST) (EX. GST) (INC. GST)
$ $ $ $ (EX. GST) (INC. GST) (EX. GST) (INC. GST)
$ $ (EX. GST) (INC. GST)
$ $ (EX. GST) (INC. GST)
AR80LFP
Y
900.00
990.00
–
–
–
–
–
–
–
–
–
AR115
Y
1,245.45
1,370.00
1,736.36
1,910.00
–
–
1,200.00
1,320.00
1,427.27
1,570.00
–
–
AR135
Y
1,281.82
1,410.00
1,772.73
1,950.00
–
–
1,309.09
1,440.00
–
–
–
–
AR140LFP
Y
1,435.45
1,579.00
–
–
–
–
–
–
–
–
–
–
AR160 and AR160D
Y
–
–
–
–
–
–
–
–
–
–
1,963.64
2,160.00
AR185 and AR185D
Y
–
–
–
–
–
–
–
–
–
–
2,054.55
2,260.00
AR250 and AR250D
Y
–
–
–
–
–
–
–
–
–
–
2,609.09
2,870.00
AR280 and AR280D
Y
–
–
–
–
–
–
–
–
–
–
2,809.09
3,090.00
AR330LFP
Y
–
–
–
–
–
–
–
–
–
–
4,045.45
4,450.00
AR410LFP
Y
–
–
–
–
–
–
–
–
–
–
6,027.27
6,630.00
AR Hydraulic drive kits There are two ways to fit hydraulic drive to the Annovi Reverberi (AR) pump range. The models with CF25 female drive capability can be fitted with a hydraulic motor directly bolted to the pump housing. This is the simplest setup and is available on our AR160, AR185 and AR250 Broadacre pump models.
Flange and Coupler – Kit AR1568 For the smaller range of AR pumps (up to AR135) or for converting an existing 6-spline model from PTO to hydraulic drive, the use of a flange is required
Alternatively for our smaller pumps, from AR70 to AR135, and to retrofit to any splined shaft AR pump in the larger range (AR160 to AR280) there is a flange available with a slip-fit female coupler allowing a hydraulic motor to be used. The hydraulic drive option – especially for modern tractors with good hydraulic systems and multiple remotes – is a very safe method of driving a pump negating the need for a PTO-shaft and its associated maintenance and safety concerns.
Hose Kit – BP-613DS Hose kit complete with fittings. Available in long and short drawbar versions
Hydraulic Drive – OMP80-BMPV Hydraulic motor complete with flow valve, ready to install
ORDER CODE
DESCRIPTION
AR70/115/135-KIT
Hydraulic drive kit including flange coupler to fit the 6-spline male pump shaft, hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion
730.00
803.00
W
AR160/185-KIT
Hydraulic drive kit including flange coupler to fit the 6-spline male pump shaft, hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion
1,395.00
1,534.50
W
AR250/280-KIT
Hydraulic drive kit including flange coupler to fit the 6-spline male pump shaft, hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion
1,395.00
1,534.50
W
AR160/185CF-KIT
Hydraulic drive kit for female pump input on CF-type AR pump models – includes hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion
1,395.00
1,534.50
W
AR250/280CF-KIT
Hydraulic drive kit for female pump input on CF-type AR pump models – includes hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion
1,395.00
1,534.50
W
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
35
Section 2
DIAPHRAGM PUMPS
Medium and High pressure Diaphragm pumps For information on controllers to suit our pumps, refer to page 40. For common spare parts, refer to page 39.
AR medium pressure (40 bar) pumps are well suited to smaller hand spraying units where applications using hand guns are needed. Very robust and reliable, this range can be motor driven or by PTO. The high pressure (50 bar) range is most commonly fitted to air-blast equipment such as our Cropliner sprayer or our linkage range for horticulture. At the top end, the 170 and 200 litre brass head/manifold pumps are highly resistant to copper products in particular.
AR330 Ideal for small spot spraying units
C
Available in
CR
AR1604
Ideal for high pressure spot sprayers and small airblast units
Ideal for high pressure airblast sprayers
AR813 Available in
APCC
Open flow
35 L/min
Max pressure
40 Bar
Open flow
80 L/min
Max RPM
550
Max pressure
50 Bar
Weight
9kg
Max RPM
550
HP required
3
Weight
20.5kg
HP required
8.8
Triple diaphragm, medium pressure pump, anodised alloy
Ideal for medium spot spraying units Available in
C
SP
T
CRGI
CR
APC
Csp
APCC
Open flow
153 L/min
Max pressure
50 Bar
Max RPM
550
Weight
40kg
HP required
18
ARBHS170 Ideal for high pressure airblast sprayers
AR1064 Ideal for high pressure spot sprayers and small airblast units AR1064 Available in
Available in
4 diaphragm, high pressure, anodised alloy
Triple diaphragm, high pressure pump, anodised alloy
AR503
APCC
Available in
APCC CF25
Open flow
163 L/min
Max pressure
50 Bar
Max RPM
550
Open flow
54 L/min
Max pressure
40 Bar
Open flow
105 L/min
Max RPM
550
Max pressure
50 Bar
Weight
65kg
Weight
11.5kg
Max RPM
550
HP required
19.3
HP required
5.6
Weight
23.5kg
HP required
13.1
4-diaphragm high pressure pump with brass heads and manifolds
Triple diaphragm, medium pressure pump, anodised alloy AR30 Ideal for small spot spraying units Available in
C
SP
T
CRGI
EM and ET Open flow
36 L/min
Max pressure
40 Bar
Max RPM
550
Weight
9.3kg
HP required
2.9
Twin diaphragm, medium pressure pump, plastic coated heads, alloy casing
36
AR813
4-diaphragm, high pressure pump, anodised alloy AR1203
ARBHS200 Idea for high pressure airblast sprayers
Ideal for high pressure airblast sprayers
Available in
APCC
Open flow
194 L/min
Max pressure
50 Bar
50 Bar
Max RPM
550
Max RPM
550
Weight
65kg
Weight
31.2kg
HP required
22.1
HP required
13.6
4-diaphragm high pressure pump with brass heads and manifolds
Available in
APCC
Open flow
116 L/min
Max pressure
Triple diaphragm, high pressure pump, anodised alloy
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
DIAPHRAGM PUMPS
C
Cardan Shaft – pump is fitted with a 1³∕8” male 6-spline shaft
APCC
Cardan Shaft – 1³∕8” 6-spline shaft both sides of pump
Csp
1³∕8” 6-spline shaft one side, bare shaft on the other
APC
CF25 CF32
Female input for direct hydraulic motor fitting. See page 35 for hydraulic drive kits to suit pump models with CF25
T
Tractor Kit – to connect pump directly to tractor PTO shaft
SP
Bare Shaft – models to suit various kits and applications
CR
Gearbox fitted to pump but without PRV fitted
CRGI
Gearbox and PRV fitted to pump
For petrol and electric drive models, see following pages along with spare parts information.
Pricing for AR Medium and high pressure pumps C MODEL
PROD. CAT.
$ (EX. GST)
CR
CRGI
$ $ $ (INC. GST) (EX. GST) (INC. GST)
SP
T
APCC CF25 CF32
$ (EX. GST)
$ (INC. GST)
$ (EX. GST)
$ (INC. GST)
$ (EX. GST)
$ (INC. GST)
$ (EX. GST)
$ (INC. GST)
AR30
Y
863.64
950.00
–
–
1,400.00
1,540.00
800.00
880.00
1,054.55
1,160.00
–
–
AR303
Y
809.09
890.00
–
–
–
–
–
–
–
–
–
–
AR503
Y
–
–
1,627.27
1,790.00
1,700.00
1,870.00
963.64
1060.00
1,227.27
1,350.00
–
–
AR813
Y
1,472.73
1,620.00
–
–
–
–
–
–
–
–
1,454.55
1,600.00
AR1064
Y
–
–
–
–
–
–
–
–
–
–
1,645.45
1,810.00
AR1203
Y
–
–
–
–
–
–
–
–
–
–
1,954.55
2,150.00
ARB1604
Y
–
–
–
–
–
–
–
–
–
–
2,136.36
2,350.00
ARBHS170
Y
–
–
–
–
–
–
–
–
–
–
3,881.82
4,270.00
ARBHS200
Y
–
–
–
–
–
–
–
–
–
–
3,990.91
4,390.00
AR pumps, fitted to croplands sprayers for 40 years
The AR30 pump (pictured above) is one of the hardest working little pumps on the market. Coupled to the ever-reliable Honda GX200 engine, this unit will give years of use. Croplands have thousands of these in operation throughout Australasia working in greenhouses, vegetable farms, on pest control trucks, spraying gorse and working on boring machines – they will go till they drop. For more information on this model, turn the page.
Croplands have been making the Cropliner orchard sprayer (pictured above) since 1972. Annovi Reverberi (AR) pumps have been fitted to the Cropliner right from the beginning – for more than 40 years, and for a very good reason. Rugged, robust, reliable – some of the sprayers built in the 70s are still out spraying, and in no small part to the reliability of the AR pumps. Nowadays we fit the brass AR170BHS model as standard equipment as many of our sprayers end up in hard going – spraying copper compounds which the brass pump can withstand. We also sell a range of less expensive anodised alloy pumps for replacements – the AR1203 and AR1604 are two new models being introduced in 2014 for replacements on older sprayers where a brass pump is not economical to fit. One thing is for sure – buy an AR pump and you will have years of use out of it.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
37
Section 2
Diaphragm pumps
AR motorised positive displacement pumps
AR30-5H
The range of petrol driven, electric and hydraulic drive AR pumps are featured on these pages, along with information on kits for hydraulic operation or converting existing pumps from PTO to Hydraulic drive.
AR30 pump fitted with gearbox with a Honda GX200QX motor and ARGI40 pressure regulator – all set to go. This is our number one seller for positive displacement spraying. Ideal for gun spraying in glasshouses and nurseries, or on utility-mounted sprayers such as our US200/400 and 500 units. A very reliable combination for higher pressure applications where hand-guns are used. Maximum pressure 40 bar, open flow 32 L/min.
For the petrol driven AR pump range, we use only the ever-reliable Honda motors to ensure our customers can access Honda’s extensive service network throughout New Zealand and Australia for after-market support. The electric drive AR range comes with factoryfitted electric motors and are ideal for commercial applications where positive-displacement pumps are needed.
AR70-5H The AR70 motorised pump also comes with a Honda GX200QX motor, gearbox and ARECM-2 pressure regulator fitted. This unit is more suited to boomspraying applications where spraying pressure required is under 10 bar. Maximum pressure 20 bar, open flow 72 L/min.
AR252-4H AR252 pump fitted with gearbox with a Honda GX200QX motor and ARGR30 pressure regulator. This unit is ideal for smaller hand-gun or boomspraying applications where price is a factor.
AR115-5H The AR115 motorised pump comes with a Honda GX200QX motor, gearbox and ARECM-2 pressure regulator fitted. This unit is suited to boomspraying applications where spraying pressure required is under 10 bar and for booms up to around 15 metres in width. An ideal unit for boom sprayers mounted on utes or other vehicles. Maximum pressure 20 bar, open flow 114 L/min.
AR135-6H The AR135 motorised pump comes with a Honda GX200QX motor, gearbox and ARECM-2 pressure regulator fitted. This unit is suited to boomspraying applications where spraying pressure required is under 10 bar and for booms up to around 18 metres in width. An ideal unit for boom sprayers mounted on utes or other vehicles. Maximum pressure 20 bar, open flow 132 L/min. AR30-5H
AR252-EM The AR252 with single-phase electric motor fitted is a very popular positive displacement pump commonly used for such agricultural uses as fertiliser injection where positive pressure is required. Also suited to some smaller commercial installations. Maximum pressure 25 bar, open flow 25 L/min.
AR30-EM The AR30 with single-phase electric motor fitted is the larger option for a positive displacement pump and can also be used for fertiliser or chemical injection where positive pressure is required. Maximum pressure 40 bar, open flow 32 L/min.
AR30-ET The ET version of the AR30 with 3-phase motor fitted has the same specifications as the EM. The pump is also ideally suited to commercial applications where positive displacement for chemical transfer or injection is required. Maximum pressure 40 bar, open flow 32 L/min.
AR30-EM
To petrol drive larger AR pumps, please contact Croplands for options and pricing. Note, to fit electric start on some of the AR petrol-driven motorised pumps on this page, please add the following code and price to your order.
AR252-EM
Petrol and Electric Drive model MODEL
38
EM $ (EX. GST) $ (INC. GST)
ET $ (EX. GST) $ (INC. GST)
ORDER CODE
DESCRIPTION
AR-ES
Electric start kit for Honda
4HP $ (EX. GST) $ (INC. GST)
$ (EX. GST) $ (INC. GST) PROD. CAT.
5HP $ (EX. GST) $ (INC. GST)
675.00
742.50
6.5HP $ (EX. GST) $ (INC. GST)
X
Prod Cat
AR252
1,113.63
1,225.00
–
–
1,754.55
1.930.00
–
–
–
–
Y
AR30
2,163.64
2,380.00
2,000.00
2,200.00
–
–
2,227.00
2,450.00
–
–
Y
AR70
–
–
–
–
–
–
2,481.82
2,730.00
–
–
Y
AR115
–
–
–
–
–
–
2,918.18
3,210.00
–
–
Y
AR135
–
–
–
–
–
–
–
–
2,945.45
3,240.00
Y
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
DIAPHRAGM PUMPS
Parts and accessories Diaphragms Order CODE
Diaphragms For Pump MODELS
MATERIAL
$ (EX. GST)
AR550085
AR70, 115, 125, 135, 145, 160, 185, 250, 280, 370, 500
DESMOPAN
32.27
$ (INC. GST) PROD. CAT. 35.50
Y
AR550086
AR70, 115, 125, 135, 145, 160, 185, 250, 280, 370, 500 (20 bar max) HPDS
38.95
42.85
Y
AR620080
AR30 (40 bar max), AR503 (50 bar max)
GOMMA
25.59
28.15
Y
AR620085
AR30 (40 bar max)
DESMOPAN
29.10
32.01
Y
AR800086
AR19 and 252 (20 bar max)
HPDS
23.91
26.30
Y
AR1040081
AR813, 1064 (50 bar max)
GOMMA
29.10
32.01
Y
AR2240080
ARBHA140, BHS140, BHS160/170, BHS200 (50 bar max)
GOMMA
35.20
38.72
Y
Desmopan diaphragms – AR550085
HPDS diaphragms – AR550086
Valves CODE
Valves For Pump MODELS
AR759051
AR70, 115, 125, 135, 145, 160, 185, 250, 280, 370, 500 (20 bar max). ARBHA140, BHS140, BHS160/170, AR2HS200 (50 bar max)
$ (EX. GST) 35.20
$ (INC. GST) PROD. CAT. 38.72
Y
AR1409050
AR30 (40 bar max). AR503, 813, 1064 (50 bar max)
29.10
32.01
Y
AR809060
AR19 and 252 (20 bar max)
19.60
21.56
Y
Valve “O” Rings
Valves – AR759051
CODE
VALVE O-RINGS FOR PUMP MODELS
$ (EX. GST)
$ (INC. GST) PROD. CAT.
AR680070
AR125, 145, 160, 185, 250, 280, 370, 500 (20 bar max). ARBHA140, BHS140, BHS160/170, BHS200 (50 bar max)
2.90
3.19
Y
AR320030
AR70, 115, 135 (20 bar max)
2.90
3.19
Y
AR620030
AR30 (40 bar max). AR503, 813, 1064 (50 bar max)
1.73
1.90
Y
AR880830
AR19 and 252 (20 bar max)
0.64
0.70
Y
$ (EX. GST)
$ (INC. GST)
7.52
8.27
Discs CODE
DISC FOR ARGI40 REGULATOR
AR110121
Vulkulan disc
PROD CAT Y
Repair Kits Code
COMMON REPAIR KITS
$ (EX. GST)
$ (INC. GST)
PR66
2 X AR550086 for AR70 pump
78.14
85.95
PROD CAT Y
PR67
4 valves and O-rings for AR70
140.00
154.00
Y
AR2374
Kit (8 x 680070 and 8 x 759051) for 4-diaphragm pumps
275.00
302.50
Y
AR1917
Valve and O-rings kit FOR AR30
134.45
147.90
Y
AR1925
Kit reg overhaul (GI40) – for ARGI40 regulator
49.81
54.79
Y
AR110121
Safety Relief Valves code
SAFETY RELIEF VALVES
$ (EX. GST)
$ (INC. GST)
AR1432
Valve safety (20 bar) – safety relief valve with reset
48.67
53.54
PROD CAT Y
AR1433
Valve safety (40 bar) – safety relief valve with reset
48.67
53.54
Y
AR1434
Valve safety (50 bar) – safety relief valve with reset
48.67
53.54
Y
code
COMMONLY USED GEARBOXES FOR AR PUMPS
$ (EX. GST)
$ (INC. GST)
AR1613
Gearbox (AR19/202/252 1:4.3)
307.29
338.02
Y
AR1636
Gearbox (AR30 1:5.9)
497.14
546.85
Y
AR1639
Gearbox (AR50;503;703 and 904 1:5.9)
547.76
602.54
Y
AR1671
Gearbox (AR70/115/120 1:5.9)
687.68
756.45
Y
Gear Boxes PROD CAT
AR1434
AR pump with gearbox fitted
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
39
Section 2
Pressure relief valves
Manual Control Valves/Regulators ORDER CODE
DESCRIPTION
$ (EX. GST)
ARGR30
Controller for AR252 pump, max flow 40 L/min, maximum operating pressure 25 bar (360 psi). Mounting kit not included. (*See AR892 for remote mount kit.)
AR892
$ (INC. GST) PROD. CAT.
186.19
204.80
Y
Remote mount kit for ARGR30, includes mount plate and bolts, extra tap, hosetails and inlet/outlet fitting
86.06
94.67
Y
ARGI40
3-outlet (2-taps supplied) manual controller suited to the AR30 pump. Can be pump mounted or remote mounted*. (*See AR980 for remote mount kit). Max flow 80 L/min, maximum pressure 40 bar (580 psi)
158.31
174.14
Y
AR980
Remote mount kit for ARGI40, includes mount plate and bolts, extra tap, hosetail and inlet/outlet fitting.
83.04
91.35
Y
ARRM40I
Two-way controller to suit AR503 pump. Can be pump mounted or remote mounted*. (*See AR985 for remote mount kit.) Max flow 90 L/min, maximum pressure 40 bar (580 psi)
216.48
238.13
Y
AR985
Remote mount kit for ARRM40I, includes mount plate and bolts, extra tap, hosetails and inlet/outlet fitting.
62.07
68.28
Y
ARVDR50
Two-way controller to suit AR813 or AR1064 pump. Can be pump mounted or remote mounted*. (*See AR998 for remote mount kit.) Max flow 130 L/min, maximum pressure 50 bar (725 psi)
391.98
431.18
Y
AR998
Remote mount kit for ARVDR50, includes mount plate and bolts, extra tap, hosetails and inlet/outlet fitting
85.75
94.33
Y
ARECM-4
Remote mount 4-way controller suitable for most 20 bar rated diaphragm pumps. 4 individual shut-off taps and gauge fitted. Comes with remote mount plate fitted. Max flow 150 L/min, maximum pressure 20 bar (290 psi). 2-tap version also available
330.87
363.96
Y
ARUCM-4
Remote mount 4-way controller suitable for most 20 bar rated diaphragm pumps. 4 individual shut-off taps, master shut-off lever and gauge fitted. Comes with remote mount plate fitted. Max flow 150 L/min, maximum pressure 20 bar (290 psi). 2-tap and 6-tap version also available.
463.89
510.28
Y
ARIDROM-4
Remote mount pressure compensating 4-way controller suitable for most 20 bar rated diaphragm pumps. Bypass taps on each section can be adjusted for pressure compensation of +/– 15%. 4 individual shut-off taps, master shut-off lever and gauge fitted. Comes with remote mount plate fitted. Max flow 150 L/min, maximum pressure 20 bar (290 psi). 2-tap and 6-tap version also available
714.15
785.57
Y
ARBMH50
Two-outlet manual controller suited to high pressure 50 bar rated diaphragm pumps. Rotary selector lever controls individual left and right shut-off or master shut-off with either pressure bypass or non-pressure bypass. Can be pump mounted or remote mounted*. (*See AR996 for remote mount kit.) Max flow 200 L/min, maximum pressure 50 bar (725 psi)
431.03
474.13
Y
AR996
Remote mounting kit for ARBMH50 controller includes mount plate and bolts, hosetails and inlet/outlet fitting
36.02
39.62
Y
Pressure Relief Valves Pressure relief valves (PRV) for excess liquid bypass, chemical resistant.
40
ORDER CODE
DESCRIPTION
23120-½-60-PP 23120-½-PP 23120-¾-PP 23120A-½-PP 23120A-¾-PP 8460-½-300 8460-¾-50 8460-¾-300 8460-¾-VI
PRV poly 400 kPa 60 psi ½” PRV poly 1000 kPa 150 psi ½” PRV poly 1000 kPa 150 psi ¾” PRV poly/VI/SS spring 1000 kPa 150 psi ½” PRV poly/VI/SS spring 1000 kPa 150 psi ¾” PRV nylon diaphragm 2000 kPa 300 psi ½” RV nylon diaphragm 350 kPa 50 psi ¾” PRV nylon 2000 kPa 300 psi ¾” PRV 2000 kPa 300 psi VITON ¾”
75.00 56.26 56.26 99.40 99.40 105.02 105.02 105.02 122.52
82.50 61.89 61.89 109.34 109.34 115.52 115.52 115.52 134.77
Z Z Z Z Z Z Z Z Z
B410.1510.2
PRV 60 bar female outlet ¾”
200.80
220.88
Z
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Centrifugal pumps
Centrifugal Pumps
Quick Guide Croplands stock a range of hydraulic drive centrifugal pumps specifically for the spraying and liquid fertiliser. Models include:
NEW
»» E-coated 650 series cast iron, high pressure and flow for spraying »» Poly pump 75 series model, well priced, lower flow but ideal for liquid fertiliser applications »» Cast iron 150 series 300–450 L/min output at 3-6 bar range – a proven performer »» 316 stainless 150 series flanged model for aggressive fertiliser applications – high flow and pressure capability
FMC-75-HYD-206
FMC-150FS-HYD-206
NEW
For water transfer, filling and firefighting, models we carry as follows: »» Banjo hydraulic drive 2” poly pump, up to 580 L/min flow – ideal to fit to trailing sprayers for filling from an external water source »» Honda-powered Onga firefighter pump to fit as a replacement to older fire fighting units or to set up your own system using a tank at the farm
FMC-150-HYD-206
FMC-650F-HYD
Banjo 200PHY
SHUB55H
ORDER CODE
DESCRIPTION
FMC-150-HYD-206
Suction 1½” discharge 1¼”. For use on pressure compensating closed centre and load sensing or pressure flow compensating closed centre systems, open-centre systems from 26 to 60 L/min. Integral needle valve bypasses up to 34 L/min on open-centre systems. Standard Viton® Carbon/Ceramic seal. Chemical Resistant Valox® Impeller. Stainless steel shaft and wear ring. Hypro equivalent = 9303-HM2C and HM4C
$ (EX. GST)
FMC-75-HYD-206
The ideal pump for the economical set-up of liquid fertiliser units. 1” suction, ¾ discharge. Maximum flow of 86 L/min, maximum pressure of 100 psi. Stainless steel internal hardware. Standard Viton/carbon/ceramic seal. All poly construction on liquid side
FMC-650F-HYD
$ (INC. GST) PROD. CAT.
1,591.82
1,751.00
X
977.27
1,075.00
X
E-coated cast iron centrifugal pump for high flow and pressure. Hydraulic drive (55 L/min) motor. Inlet is 220 full port flange (1½”) with 1¼” flanged outlet (200 standard) port. Max flow 650 L/min, max pressure 120 psi (11 bar)
1,763.64
1,940.00
X
FMC-150FSHYD-206
316 stainless steel centrifugal pump ideal for use with liquid fertilisers. Hydraulic drive (27 L/min) motor with integrated needle valve. Inlet is 220 full port flange (1½”) with 1¼” flanged outlet (200 standard) port. Max flow 550 L/min, max pressure 160 psi (8 bar)
2,024.55
2,227.00
X
200PHY
Banjo 2” polypropylene hydraulic-drive centrifugal pump. Minimum hydraulic flow required = 23 L/min (maximum 38 L/min) suits open or closed systems. 580 L/min liquid flow at 3450rpm at 1 bar pressure
2,020.00
2,222.00
X
SHUB55H
Honda GX160 powered Onga firefighter pump. Also suitable for tank filling, water transfer and some irrigation situations. Industrial grade nylon impeller, powder-coated high-grade alloy pump casing, 3-way discharge outlets, close coupled direct engine drive, large carry handle and light weight. Large 1½” priming port for quick prime and flow rate from 100 to 500 L/min depending on required pressure (in the 2–5 bar range). Note – price for pump unit only
1,199.00
1,318.90
X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
41
Section 2
Flojet pumps
Flojet pumps
6
The Flojet range of 12 and 240 volt pumps is designed for small spot spraying and boom spraying operations. Fitted on most of Croplands’ range of 12 volt sprayers, Flojet pumps perform well if used correctly and flushed out after use. Note that Flojet pumps are rated for intermittent use – so if you are considering a heavier duty application, consider the fin-cooled Shurflo option on page 44. Also, all flow ratings in the information below are described as open-flow at zero pressure. The graph at right – for the FL3501-506 model – shows that when pressure is demanded from a Flojet pump, flow decreases. This should be taken into account when planning which pump is suitable for your application.
Triplex and Pentaflex models
Pressure (bar)
4
Flow (l/min)
2 0
1
2
3
Duplex and Quad Models
3501 Triplex Pump (12 Volt)
FL112421F Series (12 Volt)
FL3501-506 • Fully sealed motor for corrosion resistance • Pressure switch for spot spraying and an internal bypass to ensure pump does not pulsate with small nozzle sizes • Low pulsation and noise • Superior pump head sealing • Excellent priming • Compact size • ³∕8” threaded ports for use with hosetails or threaded nipples Ideal for small boom or spot spraying and some other agricultural uses
FL112421F • Suited to small, portable spot sprayers • 2.4 bar (35 psi) pressure • 3.8 L/min open-flow • ³∕8” hosebarb connections Low-cost spot spray pump to replace existing pumps on smaller spot sprayers, or to make up a simple spot-spray kit
TOP SELLER
2100 and 2130 Series (12 Volt) FL2100-132 • Duplex (2) diaphragm pumps with 8 L/min (open-flow) • Pressures up to 6 bar (90 psi) on 2130 model • ³∕8” connections (¼” on 2130 model). Used for small booms, spot spraying, dairy teat-spray units, foam markers, grain and hay applicators and other agricultural uses
3521 Triplex Pump FL3521-139 • Maximum flow of 15.1 L/min (open flow) • Internal bypass gives this model superior, smooth liquid delivery for multiple nozzles • Plug-in bayonet connections (½”) with quick release clips Suited for small booms and high volume spot spraying. Triplex design makes it an excellent priming option
240 Volt Pump FL3732-501 • Maximum flow of 6 L/min (open flow) • Maximum pressure of 4 bar (60 psi) with pressure switch fitted • ³∕8” hosebarb connections • Will require wiring by a registered electrician
3811 High Pressure Triplex Pump FL3811-133 • 10.5 bar (150 psi) through the reliable triplex pump head • Priming height of up to 2.4 metres and the ability to run dry for extended periods • Pressures up to 10 bar (150 psi) • Max open flow 5.5 L/min • ³∕8” threaded ports for use with hosetails or threaded nipples Ideal for spray applications requiring higher pressures
4300 Quad Pump FL4300-143 • New heavy-duty motor • Quad-diaphragms (4) for • 17.5 L/min (open flow) • Pressure up to 3 bar (45 psi) • ¾” plug-in barb outlet • Pressure switch fitted. Regulator recommended if using a boom Ideal for boom use for lower pressures where higher flow may be required
7300 Pentflex Series FL7300-142A • Maximum flow of 26.5 L/min (open flow) • Maximum pressure of 5.5 bar (80 psi) • ¾” plug-in bayonet connectors with quick release clips • Requires heavy-duty cable (not supplied) to cope with high amperage draw Breakthrough performance for high flow and high pressure applications. Is well suited to liquid transfer, spraying and dispensing
Note: All Flojet diaphragm pumps are rated for intermittent use. PUMP MODEL
42
WITH Max L/min PRESS. (open flow) SWITCH
VOLTS
MAX PRESS. (BAR)
INLET and OUTLET
INTERNAL BYPASS
DIAPHRAGM VALVE MATERIAL MATERIAL
AMPS
PUMP $ (EX. GST)
PUMP PROD. CAT. $ (INC. GST)
FL2100-132
Yes
8.0
12V DC
4
³∕8” female
No
S
S
8
195.45
215.00
Y
FL3732-501
Yes
6.1
240V AC
4
³∕8” female
Yes
S
E
8
331.82
365.00
Y
FL2130-132
Yes
8.0
12V DC
6
³∕8” female
No
E
E
7
275.45
303.00
Y
FL3811-133
Yes
5.5
12V DC
10.5
³∕8” female
No
S
V
9
315.45
347.00
Y
FL3501-506
Yes
7.8
12V DC
3.4
S
S
8
154.55
170.00
Y
³∕8” hosebarb
Yes
FL3521-139
Yes
15.1
12V DC
4
Plug-in bayonet and ½” hosebarb
Yes
S
V
9
235.45
259.00
Y
FL4300-143
Yes
17.5
12V DC
3
¾” hosebarb
No
S
E
14
270.00
297.00
Y
Yes
S
E
28
718.18
790.00
Y
Yes
S
V
2.5
139.39
153.00
Y
FL7300-142A
Yes
26.5
12V DC
5.5
Plug-in bayonet and ¾” hosebarb
FL112421F
Yes
3.8
12V DC
2.4
³∕8” hosebarb
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Flojet pumps
Flojet Pump accessories and parts Flojet Pump Regulator Kits
FL4300-143 pump
A309B53
A908006 gauge
A9620050 regulator
UP-119B-KIT
A309953
A309B53 A typical Flojet pump fitted with A309B53 filter and A9620050/A908006 PRV+ gauge
ORDER CODE
DESCRIPTION
A9620050
Regulator with bayonet fitting for direct coupling to the outlet of 43 series Flojet pumps to regulate pressure and flow. Regulator has a bypass to tank or suction line. ½” male threaded outlet. Order gauge separately
$ (EX. GST) 33.96
$ (INC. GST) PROD. CAT. 37.36
Y
A9620090
Regulator with threaded female ½” flynut connector. Some Flojet pumps have a female ³∕8” outlet, so a ³∕8” to ½” reducing nipple (A2402021) is required to fit this regulator. Regulator has a bypass to tank or suction line. ½” male threaded outlet. Order gauge separately
33.96
37.36
Y
A908006
0–6 bar glycerine filled pressure gauge to suit regulators above
29.45
32.40
Y
A309953
Suction filter, with threaded female ½” flynut connector. Some Flojet pumps have a female ³∕8” inlet, so a ³∕8” to ½” reducing nipple (A2402021) is required to fit this filter. Outlet tail from filter is 13mm
19.00
20.90
U
A2402021
³∕8” to ½” reducing nipple
2.60
2.86
Y
A309B53
Suction filter, with bayonet coupling to connect to 43 series Flojet pumps. Outlet tail from filter is 13mm
19.00
20.90
U
UP-119B-KIT
Handy on/off switch and loom kit for Flojet pumps (or similar models)
46.11
50.71
Y
Diaphragms PUMP MODEL
PART NO.
FL2100-232
FL21010-004
40.53
44.58
Y
FL2130-132
FL21010-004
40.53
44.58
Y
FL3811-133
$ (EX. GST)
$ (Inc. GST)
Pump head only available
PROD CAT
Y
FL3501-506
FL20419-012
102.94
113.23
Y
FL4300-143
FL20403-040
36.19
39.81
y
FL3521-139
FL20419-015
102.94
113.23
Y
$ (EX. GST)
$ (INC. GST)
PROD CAT
Pressure Switches PUMP MODEL
Diaphragm PART NO.
FL2100-232
FL2095-100
71.72
78.89
Y
FL2130-132
FL21010-004
71.72
78.89
Y
FL3811-133
fl02091-150
103.78
114.15
Y
FL3501-506
FL02091-060
91.56
100.72
Y
FL4300-143
FL02095-103
86.98
95.67
y
FL3521-139
FL02091-060
91.56
100.72
Y
FL7300-142A
FL20407-780
70.50
77.55
Y
Pressure switch
Valves PUMP MODEL
PART NO.
FL2100-232
FL20914-003
$ (Ex. GST) 28.53
$ (Inc. GST) 31.38
PROD CAT Y
FL2130-132
FL20028-053
38.08
41.89
Y
FL3811-133
fl20407-022
61.81
67.99
Y
FL3501-506
FL20407-033
62.55
68.80
Y
FL4300-143
fl20407-020
79.03
86.93
y
FL3521-139
FL20407-021
66.61
73.27
Y
FL7300-142A
fl20407-720
101.54
111.69
Y
Valve
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
43
Section 2
Shurflo pumps
The Croplands range of 12 volt pumps includes popular models and introduces new models from SHURflo – the leading supplier of diaphragm pumps for Agriculture and turf applications. These 12volt models are commonly used on spot sprayers and small multi-tip boom sprayers. For 2014 we have included two heavier duty pumps to accommodate the needs of customers using their pumps in more demanding conditions. The higher flow 5059 series is a brand new model, allowing continuous spraying for small booms up to approximately 6 metres – ideal for use in RTV and ATV vehicles, the back of utility vehicles, and small trailed sprayers. This pump model will perform very well in these situations and would be an ideal replacement if you have had failures with your existing set-up in the past. Also new to Croplands range for 2014 is the fin-cooled high flow SHU2088-313145 pump. It can handle tough going and is already proving very popular in the hot climates of Northern Australia on planters and in small boom situations. For really tough conditions, consider this model.
SHUSLV10AA40
12 volt Shurflo pump, 3.8 L/min (open flow), 40 psi pressure switch. Ideal for use on small spot sprayers as a replacement pump. Has integrated ³∕8” (10mm) inlet and outlet ports.
SHU8000-547-189
SHU5059-1311-D012 12 volt Shurflo pump, 60 psi pressure switch, 6.8 L/min (open flow), with internal bypass. Note – although pictured with female ports, this model is supplied with ½” male threaded ports. Choose from the fittings below if hosetails are required. Ideal for spot sprayers where additional flow is required.
12 volt Shurflo continuous duty pump, 20.1 L/min open-flow (14 L/min at 2.75 bar), self-priming up to 2.4 metres, Santoprene diaphragms and Viton valves for maximum chemical resistance, 60 psi pressure switch, rated at 45 psi for continuous spraying. An ideal pump for use with small booms up to 6 metres (depending on output required and speed of travel)
NEW SHU2088-343-135
SHU2088-313-145
NEW
12 volt Shurflo 3-diaphragm fin-cooled pump. This model is designed for use in more heavy-demand environments such as the hotter climate in Northern Australia for use with small booms or planters. 13.6 L/min open-flow (8 L/min at 2.75 bar), self-priming up to 2.4 metres, Santoprene diaphragms and Viton valves for maximum chemical resistance, 50 psi pressure switch, rated at 40 psi for continuous spraying.
12 volt Shurflo 3-diaphragm pump, 45 psi pressure switch, 11 L/min (open flow). ½” male threaded ports. Choose from the fittings below if hose-tails are required. Ideal for small booms.
Typical set up of SHURflo pump
PUMP MODEL SHUSLV10AA40
44
WITH Max L/min MAX PRESS. (open VOLTS PRESS. SWITCH flow) (BAR) Yes
3.8
12
INLET and OUTLET
30
INTERNAL DIAPHRAGM VALVE BYPASS MATERIAL MATERIAL
³∕8” male barbed port
No
S
V
AMPS 2.5
PUMP $ (EX. GST) 114.55
PUMP PROD. CAT. $ (INC. GST) 126.00
Y
SHU8000-547-189
Yes
6.8
12
60
½” male thread
Yes
S
V
7.3
177.27
195.00
Y
SHU2088-343-135
Yes
11
12
40
½” male thread
No
S
V
7.7
223.64
246.00
Y
SHU50591311-D012
Yes
20.1
12
60
½” male thread
No
S
V
13
359.09
395.00
Y
SHU2088-313-145
Yes
11
12
40
½” male thread
No
S
V
10.1
420.00
462.00
Y
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Shurflo pumps
Shurflo Pump accessories and parts ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST)
SHU234-2926
½” NPT – 14 female x 12mm (½”) straight swivel barb (polypropylene)
3.50
3.85
PROD. CAT. Y
SHU234-2916
½” NPT – 14 female x 10mm (³∕8”) straight swivel barb (polypropylene)
3.50
3.85
Y
SHU244-5286
½” NPT – 14 male x ³∕8” coupling/adaptor (polypropylene)
5.75
6.33
Y
SHU234-3926
½” NPT – 14 female x 12mm (½”) elbow swivel barb (polypropylene)
3.50
3.85
Y
SHU234-3916
½” NPT – 14 female x 10mm (³∕8”) elbow swivel barb (polypropylene)
3.50
3.85
Y
SHU234-KIT
2 of each part numbers SHU234-2926, SHU234-2916, SHU244-5286, SHU234-3926, SHU234-3916
40.00
44.00
Y
Diaphragm/Drive Assembly Kit Pump Model
Part order code
$ (EX. GST)
$ (INC. GST)
SHU8000-547-189
SHU94-385-32
136.46
150.00
PROD. CAT. Y
SHU2088-343-135
SHU94-238-03
72.73
80.00
Y
SHU5059-1311-D012
SHU94-910-04
122.73
135.00
Y
SHU2088-313-145
SHU94-238-03
68.18
75.00
Y
Pressure Switch Kit Pump Model
Part order code
$ (EX. GST)
$ (INC. GST)
SHU8000-547-189
SHU94-229-08
44.59
45.00
PROD. CAT. Y
SHU2088-343-135
SHU94-230-36
68.18
75.00
Y
SHU5059-1311-D012
SHU94-910-02
33.64
37.00
Y
SHU2088-313-145
SHU94-230-55
109.09
120.00
Y
Valve Assembly Kit Pump Model
Part order code
$ (EX. GST)
$ (INC. GST)
SHU8000-547-189
SHU94-391-46
41.82
46.00
PROD. CAT. Y
SHU2088-343-135
SHU94-232-05
109.09
120.00
Y
SHU5059-1311-D012
SHU94-910-05
78.18
86.00
Y
SHU2088-313-145
SHU94-232-05
109.09
120.00
Y
CHECK Valve Kit Pump Model
Part order code
$ (EX. GST)
$ (INC. GST)
SHU8000-547-189
SHU94-374-08
17.27
19.00
PROD. CAT. Y
SHU2088-343-135
SHU94-237-05
50.00
55.00
Y
SHU5059-1311-D012
SHU94-910-03
22.73
25.00
Y
SHU2088-313-145
SHU94-237-05
50.00
55.00
Y
Apex 12 volt pumps (For replacement on Apex sprayers only)
AS-52210100700
AS-52210100200
ORDER CODE
DESCRIPTION
AS-52210100600
Replacement pump for Apex ASATV-10 CropPak 40 litre sprayer
AS-52210100200 AS-52210100700
AS-52210100600
$ (EX. GST)
$ (INC. GST) PROD. CAT.
110.00
121.00
Y
Replacement pump for Apex sprayers ASBBS-16 knapsack sprayer and ASAT-30M3 trolley sprayer
54.00
59.40
Y
Replacement pump for ASBBS-10 knapsack sprayer
48.00
52.80
Y
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
45
Section 2
Knapsack sprayers
Knapsack sprayers SW503 Lance clips into the lid for easy storage and carrying
TOP SELLER
Convenient sprayer carry handle
Comfortable handgrip with lever lock
Long lance
Adjustable nozzle Safer, wide 5½” diameter port with filling strainer In-built pressure filter Sturdy one-piece handle folds for easy storage
Large 15 litre tank
Wide, non-absorbent polyester straps with heavy-duty padding for strength, comfort and safety
Strong, easy to clean polyethylene tank with UV inhibitors for long life OU
In-built agitator
O TA RT
L QUALITY C OM
CROPLA
MI
TM
EN
T
Non-leak, high quality dual piston/ diaphragm pump (up to 6 bar) with Viton seals and a safety diaphragm – for wear resistance and reliability
NDS
2 YEAR bj
EC
T
TO
TO
L TA
QUA
LITY COMMITM
EN
NDS
O
CROPLA
s
jE
CT
TO
Spray
CROp
M LANds TER
TI
O
Rugged brass lance with angled nozzle holder for perfect spray distribution at the correct height
New ergonomic tank design with ribbed side panels for easier carrying and lifting
Wide filling port with filling strainer inside
IO
IT
Ub
dI
Nd
AN 0 WARoR n SW54 er
ds TERMs ANd
TY
N CO
NEW
Ns
2 YEAR TY
LAN
Carrying handle integrated into the lid design Lance clips into the lid for easy storage and carrying
T
on SW50 knapsac 3 k
Op
Adjustable brass conejet nozzle to make spray pattern adjustments fast and easy
SW540 ArRiving April 2014 UR
CR
Ns
sU
WARRA N
sA
Nd
CO
UV stabilised tank for long life
Pressure gauge mounted on the spray trigger for accurate application
Longer pumping lever to make it easier to operate the sprayer and less effort to maintain spraying pressure
Lock-on spray function on the spray gun with in-built pressure filter to avoid nozzle blockages
Pump lever can be changed from one side to the other and folds away neatly for storage
New, secure clips at the base of the straps so they won’t come off the bottom frame
Centrally mounted padded straps for comfort and quick mounting when full New low friction piston pump design with no leak system for safety – ensures more effortless and safe spraying every time
46
www.croplands.com.au
Tank to base support for added strength
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Knapsack and compression sprayers
INDUSTRIAL RANGE
AGRICULTURAL RANGE
SW189C
SW319
Heavy duty 15 litre knapsack designed for industrial use (diesel compatible); wide filling neck, rugged shut-off gun, adjustable nozzle, inbuilt pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.
High quality heavy duty 5 litre compression sprayer; wide filling neck, rugged shut-off gun, adjustable nozzle, pressure relief valve, in-built pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.
SW322-315
SW320
High quality heavy duty 9 litre compression sprayer for use with selected solvents and diesel; wide filling neck, rugged shutoff gun, adjustable nozzle, pressure relief valve, inbuilt pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.
High quality heavy duty 7 litre compression sprayer; wide filling neck, rugged shut-off gun, adjustable nozzle, pressure relief valve, in-built pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.
PAKMAN (fitted to sprayer)
SW550 16 litre 12 volt rechargeable electric sprayer; wide filling neck, rugged shut-off gun, adjustable nozzle, in-built pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.
Chemical resistant foam back protector, designed to significantly increase comfort for prolonged spraying needs. Fits all Croplands 15 litre knapsack sprayers. A must for making spraying much more comfortable.
ORDER CODE
DESCRIPTION
SW319
Compression sprayer 5 litre
67.27
74.00
X
SW320
Compression sprayer 7 litre
73.64
81.00
X
SW322-315
Compression sprayer 9 litre – New solvent model
103.64
114.00
X
SW503
Knapsack 15 litre piston/diaphragm
153.64
169.00
X
SW540
New knapsack 15 litre piston pump with safety chamber and gauge on lance
180.91
199.00
X
SW189C
Knapsack sprayer 15 litre (diesel)
170.91
188.00
X
SW550
12 volt, 16 litre electric knapsack sprayer. Supplied charger required adaptor, not supplied.
395.00
434.50
X
PAKMAN
Back protector
58.18
64.00
X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
47
Section 2
Sprayer Accessories
ACCESSORIES FOR CROPLANDS CropPak and SWISSMEX SPRAYERS Croplands spray lances, pictured below, are fitted to our range of CropPak sprayers, knapsack sprayers and compression sprayers. They can be used for a wide range of spraying applications up to 10 bar pressure. See below for information on the great range of booms, spray guards, extensions and other accessories that fit these lances.
Learn more about spray lances, scan the QR code
Spray lances SW-LANCE-ASSY
SW-LANCE-ADJ-AS
ORDER CODE
DESCRIPTION
SW-LANCE-ASSY
Complete spray gun with brass lance, adjustable nozzle and hose connector fitted (in-built pressure filter)
$ (EX. GST)
SW-LANCE-ADJ-AS Complete spray gun with extendable fibreglass lance, adjustable nozzle and hose connector fitted (in-built pressure filter)
$ (INC. GST) PROD. CAT.
41.27
45.40
Z
50.60
55.66
Z
Spray booms to fit the Lance assembly SW219-151C
SW219-138C SW219-148C SW219-147C 2-nozzle boom (narrow) SW219-140C ORDER CODE
DESCRIPTION
SW219-147C
2-nozzle boom, narrow (pictured above right)
$ (EX. GST) 17.00
$ (INC. GST) PROD. CAT. 18.70
Y
SW219-140C
2-nozzle boom, 500mm (above)
19.91
21.90
Y
SW219-148C
2-nozzle boom, 750mm (above)
23.36
25.70
Y
SW219-138C
3-nozzle boom, 1,000mm (above)
27.64
30.40
Y
SW219-151C
3-nozzle boom, 1,500mm (above)
32.73
36.00
Y
SW219-282C
4-nozzle boom, 1,500mm (not pictured)
43.36
47.70
Y
Extension lances and nozzles SW803-262C
SW219-143C SW219-142C
SW219-1236C
SW803-085
SW219-039C Learn more about extension lances, scan the QR code
XR8003-VK
48
ORDER CODE
DESCRIPTION
SW219-142C
1,000mm spray lance extension to fit Swissmex trigger assembly, with nozzle
17.73
19.50
Y
SW219-143C
1,500mm spray lance extension to fit Swissmex trigger assembly, with nozzle
22.82
25.10
Y
SW219-146C
2,000mm spray lance extension to fit Swissmex trigger assembly, with nozzle
28.27
31.10
Y
SW803-085
Brass spray lance, 520mm (standard lance), nozzle not included
17.20
18.92
Y
SW219-236C
Telescopic lance (to 940mm), with nozzle
15.50
17.05
Y
SW803-262C
Plastic adjustable nozzle complete with cap and gasket
4.55
5.00
Y
SW219-089C
Brass adjustable nozzle complete with cap and gasket
21.18
23.30
Y
XR8003-VK
80 degree flat fan nozzle for use with spray guard or lance
8.00
8.80
Y
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Sprayer Accessories
Did you know? Did you know that Croplands range of CropPak sprayers use the Swissmex lance, so all the useful accessories on these two pages are suitable for use with the 12 volt CropPaks in section 1, page 24.
Spray guards to protect sensitive plants. Constant flow valve Did you know?
Learn more about spray guards, scan the QR code
SW219-099
SW219-117
SW219-852
ORDER CODE
DESCRIPTION
SW219-099
Herbicide spray guard, 400mm, large (above left)
SW219-117
Herbicide spray guard, 220mm, small (above centre)
SW219-85*
Constant flow valve, 1 bar to 3 bar pressure. *1 = 1 bar, 2 = 1.5 bar, 3 = 2 bar, 4 = 3 bar
Learn more about constant flow valves, scan the QR code
Did you know by fitting a constant flow valve to your lance (left), you can reduce pumping by up to 30% and have constant pressure at the nozzle.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
10.00
11.00
Y
7.36
8.10
Y
40.36
44.40
Y
Common Replacement components and kits
Trigger, SW808-073C
Lid seal, SW501-002
Tail for trigger assembly, SW808-014
Diaphragm, SW503-031
Elbow from tank, SW502-191
Repair Service kit, SWRPK120
Tank Lid, SW502-001C
Lid strainer, SW501-004
Repair Service kit, SWRPK503
Repair Service kit, SWRPK189
To make repairs to your Croplands Swissmex knapsack or compression sprayer, see the options below ORDER CODE
DESCRIPTION
SW808-073C
Complete trigger assembly (pictured above)
20.82
22.90
Y
SWRPK120
Repair/service kit for SW319 and SW320 (pictured above)
20.00
22.00
Y
SWRPK189
Repair/service kit for SW189
20.00
22.00
Y
SWRPK189C
Repair/service kit for SW189C
30.00
33.00
Y
SWRPK503
Repair/service kit for SW503 (diaphragm not included in kit – not pictured)
20.00
22.00
Y
SW503-031
Diaphragm to suit SW503 Knapsack (pictured above)
10.00
11.00
Y
SW502-024C
Pump module for SW502 (not pictured)
57.33
63.06
Y
SW502-191
Elbow connector 90° – outlet to hose from tank (pictured above)
10.00
11.00
Y
SW808-014
Hose tail to fit ³∕8” (10mm) hose – attached to back of trigger assembly (pictured above)
2.86
3.15
Y
SW502-001C
Red tank lid – suits all models (pictured above)
17.00
18.70
Y
SW501-002
Lid seal (pictured above)
17.45
19.20
Y
SW501-004
Lid strainer (pictured above)
10.05
11.05
Y
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
49
Section 2
Apex sprayers
ASNS-1.5A
A range of handy sprayers for use in non-commercial situations. The compression sprayer range includes 1.5 litre, 5 litre and 10 litre models. The 15 litre model is a piston-type with shoulder straps and built in accumulator to hold pressure whilst in use. The rechargeable and battery operated 12 volt units have additional features with the added benefit of not requiring manual pumping, allowing the operator to concentrate solely on the application at hand. Specifications and features are listed by each model.
1.5 litre hand-held compression sprayer with: »» 1.5 litre capacity »» Suction strainer on the inlet tube »» Nickel-coated nozzle for longer life »» Excellent sealing for better compression and spraying quality
ASFM-5A
5 litre compression sprayer with: »» Pressure relief valve to avoid over-pressurisation and to relieve pressure prior to emptying »» Trigger gun with 450mm lance and adjustable nozzle »» 1.2 metre hose length »» Lance is vertically stored »» Positive pump action »» Light weight (1.4kg empty) »» 100mm filling neck with splash-shield rim
ASFM-10A
10 litre compression sprayer with: »» Pressure relief valve to avoid over-pressurisation and to relieve pressure prior to emptying »» Trigger gun with 450mm lance and adjustable nozzle »» 1.2 metre hose length »» Lance is vertically stored »» Positive pump action »» Light weight (1.8kg empty) »» 125mm filling neck with splash-shield rim
ASNS-15FB ASNS-1.5A
ASFM-5A ASFM-10A
15 litre piston-type knapsack sprayer with: »» Internal pressure accumulator to keep pressure and avoid constant pumping, complete with pressure selection adjustment »» Left or right side pump lever action »» 100mm lid with strainer and integrated seal to avoid leaking »» 1.2 metre hose length »» Trigger gun with 500mm lance and adjustable nozzle and flat fan option »» Light weight (3.8kg empty) »» Waist strap to keep unit stable whilst in use
ASGS-10
»» »» »» »» »» »» »»
ASNS015FB
Granular applicator for spreading granulated formulations and fertilisers Clear lid to see what product is left Adjustable for application rate and direction Fully enclosed and lubricated gearbox Padded shoulder straps 10 litre capacity Spreading width approximately up to 5 metres (depending on material being spread)
ASGS-10
Sprayers and Applicators
50
ORDER CODE
DESCRIPTION
ASNS-1.5A
1.5 litre compression sprayer
17.27
19.00
Y
ASFM-5A
5 litre compression sprayer with lance
27.27
30.00
Y
ASFM-10A
10 litre compression sprayer with lance
35.45
39.00
Y
ASNS-15FB
15 litre piston-type knapsack sprayer with lance
80.91
89.00
Y
ASGS-10
10 litre granular applicator
71.82
79.00
Y
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
apex sprayers
ASBBS-10
10 litre battery-powered sprayer with: »» Wide filling lid with integrated carry handle – can be carried by hand or worn on your back »» Requires 4 D-size batteries (not supplied) »» 1 L/min pump output from diaphragm pump »» Touch button operation »» Ideal for the home garden
ASBBS-16
16 litre battery-powered knapsack sprayer with: »» Rechargeable 12 volt sealed lead/acid battery; voltmeter to see charge level at a glance »» Large battery gives longer spraying time – approximately 4 hours continuous use from full charge »» Large filling lid »» 12 volt diaphragm pump for positive spraying pressure
ASAT-30M3
30 litre trolley sprayer complete with: »» 3 L/min (open-flow) 12 volt diaphragm pump »» Heavy duty 12 volt rechargeable lead-acid battery »» Large filling lid »» Large drain for emptying and complete clean out »» Lance with adjustable nozzle »» Handy hose reel with 9 metres spray hose
ASBBS-10
ASBBS-16
AS3WF-5 12 litre motorised mist blower with: »» 77cc displacement 2-stroke petrol motor (requires premix) »» 1.9 litre fuel capacity »» Electronic ignition »» 12 litre liquid capacity »» Padded back rest and shoulder straps »» Enclosed, protected fan unit »» Ergonomic handle for spraying outlet »» Requires the use of hearing protection as noise level is over 90db
SPRAY GUARDs Small and large spray guards to suit compression sprayers (FM-5A, FM-10A, NS-15FB)
ASGRD-01
ASGRD-02
AS3WF-5
ASAT-30M3
Sprayers and Accessories ORDER CODE
DESCRIPTION
ASBBS-10
10 litre rechargeable battery-pack sprayer with lance
160.00
176.00
Y
ASBBS-16
16 litre 12 volt rechargeable knapsack sprayer
171.82
189.00
Y
ASAT-30M3
30 litre trolley sprayer with 3 L/min pump (open-flow)
362.73
399.00
Y
AS3WF-5
12 litre mist-blower knapsack sprayer
597.27
657.00
Y
ASGRD-01
Spray guard – small
9.09
10.00
Y
ASGRD-02
Spray guard – large
11.82
13.00
Y
ASAT-30M3-1
Charger for trolley sprayer
87.50
96.35
Y
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
51
Section 2
Diesel Transfer Units
DIESEL ADBLUE UNITS
Quick Guide »» Auto shut-off gun prevents spillage when filling (except US100AB)
US100AB
Lockable pump cover Piusi urea pump, 12 volt, 35 L/min (open-flow) 4 metres delivery hose L = 710mm, W = 800mm, H = 475mm
»» Baffled tanks (except 100 litre) prevents excessive liquid movement »» Self-draining top stops pooling of diesel on tank »» Internal suction filter helps prevent contamination »» Swivel on filling gun assists with hose storage and filling »» Earth strap removes static build up
US200DN
Lockable pump cover Piusi vane pump, 12 volt, 50 L/min (open-flow) Auto shut-off gun with swivel 4 metres delivery hose L = 1,180mm, W = 800mm, H = 475mm
US400DSQ
Lockable pump cover Piusi vane pump, 12 volt, 50 L/min (open-flow) Auto shut-off gun with swivel 4 metres delivery hose L = 1,650mm, W = 800mm, H = 600mm
52
»» Side handles (200/400) for easier demounting and storage »» Optional electronic diesel counter – see page 53
US400DS
Lockable pump cover Piusi vane pump, 12 volt, 50 L/min (open-flow) Auto shut-off gun with swivel 4 metres delivery hose L = 1,180mm, W = 800mm, H = 795mm
ORDER CODE
DESCRIPTION
US200DN
200 litre fully baffled diesel transfer unit with 12 volt Piusi vane pump
1,208.18
1,329.00
X
US400DSQ
400 litre fully baffled squat tank diesel transfer unit with 12 volt Piusi vane pump
1,540.00
1,694.00
X
US400DS
400 litre fully baffled high tank diesel transfer unit with 12 volt Piusi vane pump
1,540.00
1,694.00
X
US100AB
100 litre AdBlue transfer unit with 12 volt Piusi AdBlue pump
1,599.09
1,759.00
X
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Diesel Transfer Units
Accessories and options PI-F00201AA0
PI-F00618000
PI-F00225480
PI-F00408100
PI-F00231070
PI-F00750100
PI-F0033208A
PI-F00212000
SuzzaraBlue 12 volt self-priming urea transfer pump kit; 35 L/ min, 22 amps, 6 metres ¾” hose with foot-valve, 2 metres electric cable with on/off switch, manual shut-off nozzle. Ideal to fit up to an existing tank.
Diesel pump kit, includes Piusi self-priming 12 volt vane pump, up to 50 L/min flow, suction capacity to 2 metres, 2 metre power cable, foot valve and 6 metres hose, auto shut-off gun.
Excellent diesel transfer pump kit in a very handy carry case. Self-priming 12 volt 45 L/min Piusi pump, fuel filter, 6 metres hose, foot valve and shut-off gun. Chuck it in the ute and take it anywhere.
High quality Piusi Suzzarablue rotary hand pump with dropdown suction kit and 3 metres of delivery hose and simple spout. Ideal for quick connection to a 200 litre AdBlue™ drum.
ORDER CODE
DESCRIPTION
PI-F00201AA0
Adblue pump kit
PI-F00212000
Auto hosereel 14 metre 45lpm, pump and gun complete
PI-F00225480
High quality Piusi Suzzarablue auto-shut-off nozzle – capable of up to 80 L/min delivery, with swivel fitted.
High quality K24 electronic meter – suitable for diesel – can be fitted into the line prior to the gun on Croplands’ diesel transfer units or your own system. Sturdy case, digital display, uses two AAA batteries.
Quality steel retractable hose reel for diesel use, 14 metres ¾” high-quality hose and 1” male end fitting, 1” female inlet. Less than 0.6 bar pressure loss at 60 L/ min flow. Use your existing diesel pump and gun to hook up to this reel for those larger in-field applications.
Piusi Pitstop automatic retractable reel for diesel use, complete with 45 L/min self-priming 12 volt Piusi pump, 14 metres of delivery hose, on/off switch, auto shut-off gun with swivel, sturdy base and fuel filter – ready to hook up straight to your diesel tank and get wpumping!
$ (EX. GST)
$ (INC. GST) PROD. CAT.
817.27
899.00
X
2,227.27
2,450.00
X
Diesel pump and hose kit
408.18
449.00
X
PI-F00231070
Piusibox fuel transfer kit
544.55
599.00
X
PI-F0033208A
Rotary hand pump for AdBlue
200.00
220.00
X
PI-F00408100
Diesel counter electronic k24
271.82
299.00
X
PI-F00618000
Auto stop nozzle adblue sb32
344.55
379.00
X
PI-F00750100
Hose reel 14 metre 20mm hose
872.73
960.00
X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
53
Section 2
Spreaders
TRAILED 150 FERTILISER AND SEED SPREADER
»» Spun-steel hopper, hot-dip galvanised
140 litre capacity spreader with galvanised steel hopper
»» Aluminium-cased gearbox with sealed bearings
The SIT-FSP150C trailed spreader utilises a ground drive system from one wheel via a sealed gearbox to turn the spinner and product agitator in the hopper. The towing vehicle will typically be a small tractor, ATV or RTV 4-wheeled vehicle or similar with a towbar that can hook up to the clevis-type drawbar on the spreader via a 15mm pin. Ideal for fertiliser and seed spreading in lawns, turf areas and pasture, the SIT-FSP150C will give years of use if well maintained and cleaned after use.
Quick Guide »» Pressed tubular frame, epoxy painted
»» 15 x 6.00 pneumatic 2-ply turf tyres »» Adjustable height drawbar with 5 height settings »» 5-position adjustment for output utilising a simple lever and preset lock-nut »» Length 1,400mm »» Height 1,350mm »» Width 900mm »» Capacity of fertiliser 75–100kg* *Will vary depending on product being used
fertiliser type
typical speed range (km/hr)
Approx Spreading width* (metres)
Coarse Grain Fertiliser
8–12
6–8
Medium Grain Fertiliser
8–12
5–7
Fine Grain Fertiliser
8–12
5–6
Medium Grain Crystalline Fertilisers
8–12
4–5
Ammonium Sulphate
8–12
6–8
SIT-FSP150C
54
ORDER CODE
DESCRIPTION
SIT-FSP150C
150 trailed spreader
1,268.18
1,395.00
X
SIT-FS300C
300 3-PTL spreader
817.27
899.00
X
SIT-FS500C
500 3-PTL spreader
863.64
950.00
X
SITFSP150
150 trailed spreader unassembled
1,177.27
1,295.00
X
SIT-FS300
300 3-PTL spreader unassembled
726.36
799.00
X
SIT-FS500
500 3-PTL spreader unassembled
772.73
850.00
X
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Spreaders Section 2
LINKAGE 300 FERTILISER AND SEED SPREADER
LINKAGE 500 FERTILISER AND SEED SPREADER
250 litre capacity spreader with galvanised steel hopper
340 litre capacity spreader with galvanised steel hopper
The SIT-FS300C linkage spreader utilises a PTO (power takeoff) drive system via a driveshaft (supplied) to turn the spinner for spreading fertiliser or seed. Ruggedly built, the all steel construction spreader is designed for use with small tractors capable of safely lifting up to 400kg fitted with a 540RPM PTO-shaft and three-point linkage points. Ideal for fertiliser and seed spreading in grasslands, crops, turf areas and pasture, the SIT-FS300C will give years of use if well maintained and cleaned after use. For information and spreading table vist www.coplands.com.au
The SIT-FS500C linkage spreader utilises a PTO (power takeoff) drive system via a driveshaft (supplied) to turn the spinner for spreading fertiliser or seed. Ruggedly built, the all steel construction spreader is designed for use with small tractors capable of safely lifting up to 500kg fitted with a 540RPM PTO-shaft and 3-point linkage points. Ideal for fertiliser and seed spreading in grasslands, crops, turf areas and pasture, it will give years of use if well maintained and cleaned after use. 3 easily selectable spreading patterns. Spreading disc with 4 rotor blades able to be set in 5 positions.
SIT-FSP150C
SIT-FS300C
300 | 500 ACCESSORIES SINGLE SIDE CONVEYOR KIT Side throw conveyor is ideal for side spreading (SIT400.168) To suit FS 300/500
DOUBLE DISCHARGE CONVEYOR KIT Side throw conveyor is ideal for side spreading (SIT400.215) To suit FS 300/500
AGITATOR KIT Articulated Agitator is recommended when spreading powdery fertilisers and lime (SIT400.200) To suit FS 300/500
ORDER CODE
DESCRIPTION
SIT400.168
Side throw conveyor
443.50
487.85
X
SIT400.215
Double discharge conveyor
559.00
614.90
X
SIT400.200
Agitator kit
62.50
68.75
X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
55
Section 2
Guns, Hoses and Accessories 5
4
6 1 2 10
3
9
7 and 8 12 11
Spray Guns and Lances ORDER CODE
#
DESCRIPTION
SW-LANCE-ASSY
1
Swissmex gun and lance
41.27
45.40
Z
SW-LANCE-ADJ-ASSY 2
Swissmex gun and extendable lance
50.60
55.66
Z
RL10
3
RL10 gun with 500mm steel lance, adjustable nozzle
78.65
86.52
Z
AA30L-PP
4
TeeJet GunJet poly spray gun, 10 bar (150 psi)
74.55
82.00
Z
AA30L-¼
5
TeeJet GunJet drip-free spray gun, 17 bar (250 psi)
89.68
98.64
Z
AA31
6
TeeJet forged brass trigger gun, 35 bar (500 psi)
104.55
115.00
Z
AA43HA-8
7
TeeJet heavy-duty high pressure gun, 55 bar (800 psi)
218.18
240.00
Z
AA43LA-8
8
TeeJet heavy-duty medium pressure gun, 14 bar (200 psi)
218.18
240.00
Z
B26.901.165MK2
9
Turbo 400 with metal grip and protected lever, 50 bar (725 psi)
160.71
176.78
Z
B46.901.46RG
10 Turbo 400RG gun with ergonomic grip and positive-notch droplet selection, 40 bar (580 psi)
209.89
230.88
Z
B7.901.10
11 Evolution turbine gun, 60 bar (850 psi)
278.62
306.48
Z
B35.901.16
12 Spot spray gun, pistol type, 40 bar (580 psi)
118.48
130.33
Z
Hoses ORDER CODE
Description
HCVT20 HSC20 HEP25 HEP32 HEP40 HPW10 HPW10/40 HPW10-30 HPW10-100 HPW12 HPW12/40 HPW12-30 HPW12-100 HPW20 HPW20-50 HPW25 HPW32
Hose 20mm vinyl clear Clear wire spiral hose, 20mm Hose 25mm suction (black) Hose 32mm suction (black) Hose 40mm suction (black) Hose 10mm 20 bar for pesticide and herbicide Hose 10mm 40 bar for pesticide and herbicide Hose 10mm 20 bar for pesticide and herbicide (30 metres) Hose 10mm 20 bar for pesticide and herbicide (100 metres) Hose 12mm 20 bar for pesticide and herbicide Hose 12mm 40 bar for pesticide and herbicide Hose 12mm 20 bar for pesticide and herbicide (30 metres) Hose 12mm 20 bar for pesticide and herbicide (100 metres) Hose 20mm 20 bar for pesticide and herbicide Hose 20mm 20 bar for pesticide and herbicide (50 metres) Hose 25mm 20 bar for pesticide and herbicide Hose 32mm 20 bar for pesticide and herbicide
Clamps
56
$ (EX. GST)
$ (INC. GST) PROD. CAT.
$ (EX. GST) $ (INC. GST) PROD. CAT. 4.55 12.27 8.73 12.73 12.73 2.82 7.27 83.64 279.09 3.36 8.36 100.00 332.73 10.27 527.27 12.73 20.09
5.00 13.50 9.60 14.00 14.00 3.10 8.00 92.00 307.00 3.70 9.20 110.00 366.00 11.30 580.00 14.00 22.10
HSC20
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
HPW10 HPW12 HPW20/25 HPW32 HEP25 HEP32 HEP240
Cobra clamps
ORDER CODE
Description
COBRAC13/8 COBRAC15/8 COBRAC18-19/8 COBRAC24/8 TR38HC TR12HC TR34HC TR1HC TR114HC TR112HC TR2HC TR3HC
Cobra clamp for HPW 08 Cobra clamp for HPW 10 Cobra clamp for HPW 12 Cobra clamp for HPW 20 Hose clamp 10mm steel band worm drive Hose clamp 12mm steel band worm drive Hose clamp 20mm steel band worm drive Hose clamp 25mm steel band worm drive Hose clamp 32mm steel band worm drive Hose clamp 40mm steel band worm drive Hose clamp 50mm steel band worm drive Hose clamp 75mm steel band worm drive
www.croplands.com.au
$ (EX. GST) $ (INC. GST) PROD. CAT. 0.93 0.97 1.03 1.13 2.19 2.25 2.93 2.49 3.10 3.33 3.60 6.44
1.03 1.06 1.14 1.25 2.40 2.48 3.22 2.74 3.41 3.66 3.96 7.08
Z Z Z Z Z Z Z Z Z Z Z Z
Hose clamps
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Hosereels and Pressure Gauges
Hosereels
L-R3000
L-R0160
Croplands range of manual hose reels include nine models listed below that are made of steel. A steel reel, complete with high quality fittings, will last years and is a good investment for that reason. The steel on the reel itself is sand-blasted and powder coated for high corrosion resistance. A galvanised base on the larger base-mount models is heavy duty and hot dip zinc plated. The smaller L-R0150 reel has a clever swivel-base design and locking pin. All Croplands spray hose is specifically made for Croplands – the pressure hose in particular has added longitudinal nylon fibres to ensure the hose will not stretch, along with added nitrile compound internally so it will not break down and de-laminate like cheaper hose often does. Being black in colour our hose resists sun damage for many years longer than coloured hose. L-R0240
H
W W=220mm H=490mm
L-R0250
L-R0260
L-R0230
L-R2412
H H
H
W L=450mm W=270mm H=560mm
L
W
H
W
W
L
L=450mm W=540mm H=510mm
H
W=200mm H=450mm
W
L
L=580mm W=270mm H=630mm
L=450mm W=270mm H=560mm
*All bare capacities are for 10mm spray hose. L=length, W=width, H=height; dimensions may change without notice and do not include side-bracket on side-mount reels. ORDER CODE DESCRIPTION
$ (EX. GST) $ (INC. GST) PROD. CAT.
L-R0150
Lighter duty steel reel, bare, 30 metres of 10mm hose capacity. Swivel base and reel lock standard
129.09
142.00
X
L-R0160
Lighter duty steel reel, 20 metres of 10mm hose fitted, RL10 gun supplied. Swivel base and reel lock standard
264.55
291.00
X
L-R0240
Base mount model, 50 metre capacity* (bare reel)
438.18
482.00
X
L-R1412
Base mount model comes with 30 metres of 10mm spray hose and Turbo 400 spray gun
616.36
678.00
X
L-R1412HP As per L-R1412 with but high pressure hose fitted (40 bar)
650.00
715.00
X
L-R0260
Side-mount (with bracket), 50 metre capacity* (bare reel)
322.73
355.00
X
L-R2412
Side-mount (with bracket), comes with 30 metres of 10mm spray hose and Turbo 400 spray gun
506.36
557.00
X
L-R2412HP As per L-R2412 but with high pressure hose (40 bar)
659.09
725.00
X
L-R0250
Large base mount model, 100 metre capacity* (bare reel)
584.55
643.00
X
L-R0230
Slim-line steel hose reel, galvanised base mount model, 100 metre capacity* (bare reel)
518.18
460.00
X
L-R3000
High-impact poly reel, spring retractable; 16 metres of 10mm spray hose and threaded end-fitting (no gun fitted)
292.73
322.00
X
Pressure Gauges Glycerine-filled gauges in 63mm and 100mm sizes.
L-G1432 ORDER CODE
DESCRIPTION
MAX PRESS BAR
L-G1426 MAX PRESS KPA
L-G1626 MAX PRESS PSI
A908006
$ (EX. GST)
$ (INC. GST) PROD. CAT.
A908006
Pressure guage, 40mm, 0-600 KPa
6
600
90
31.38
34.52
Y
L-G1426
Isometric pressure gauge, 63mm, ¼” bottom-entry
25
2,500
360
31.38
34.52
Y
L-G1425
Pressure gauge, 63mm, ¼” bottom-entry
25
2,500
360
31.38
34.52
Y
L-G1430
Pressure gauge, 63mm, ¼” bottom-entry
40
4,000
580
31.38
34.52
Y
L-G1432
Pressure gauge, 63mm, ¼” bottom-entry
60
6,000
870
31.38
34.52
Y
L-G1602
Pressure gauge, 100mm, ¼” bottom-entry
25
2,500
360
70.62
77.68
Y
L-G1611
Pressure gauge, 100mm³∕8” bottom-entry
16
1,600
230
70.62
77.68
Y
L-G1612
Pressure gauge, 100mm, ³∕8” bottom-entry
25
2,500
360
70.62
77.68
Y
L-G1660
Pressure gauge, 100mm, ³∕8” bottom-entry
60
6,000
870
70.62
77.68
Y
L-G1626
Isometric pressure gauge, 100mm, ³∕8” bottom-entry
25
2,500
360
70.62
77.68
Y
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
57
Section 2
Safety with Chemical Application
Kasco Helmet/Respirator and Filters
L-H3300
KASCO-0601/19
L-H3016
ORDER CODE
DESCRIPTION
L-H3016
K80-T9R respirator complete with helmet, blower unit and belt, single filter and 12 volt cable-charger for connection to a continuous 12 volt power source such as a tractor or vehicle. This unit will operate for approximately 30 minutes without the 12 volt power source from a small battery in the blower unit. Optional 240 volt charger available to charge the battery for 30 minutes of use if required as a stand-alone function. Designed to be continuously powered while in use. Agricultural use only
$ (EX. GST)
KASCO-0105/067
Optional 240 volt charger for the L-H3016 model
L-H3017
K80-T5 respirator complete with helmet, blower unit and belt, single filter and rechargeable battery pack – also carried on the belt. Designed to be charged overnight and powered by the battery pack during use. Approximately 6 hours operating time for 1 overnight charge. This will diminish as batteries degrade. For agricultural use only. Unit not pictured
KASCO-0601/19 KASCO-0601/25
$ (INC. GST) PROD. CAT.
1,699.09
1,869.00
X
394.49
433.94
X
1,699.09
1,869.00
X
ZA2P3 filter for Kasco units, each
108.27
119.10
X
ZA2B2P3 filter for Kasco units, suited for HiCane applications
107.73
118.50
X
Mask Respirators and Filter Options ORDER CODE
DESCRIPTION
L-H3300
SR100 silicone mask for superior face seal. Double anti-clog exhaust valves, filter not included.
$ (EX. GST)
L-H3500
151.84
X
Particle filter P3 (210/310) particles, wet and dry dust, aerosols, mould, bacteria, viruses, smoke, mist, fumes
43.97
48.37
X
L-H3501
Pre-filter 221-1 (pack of 10)
11.25
12.38
X
L-H3502
Gas filter A1 (217) organic vapour such as solvents – regular capacity
42.69
46.96
X
L-H3503
Gas filter A2 (218) organic vapour such as solvents – high capacity
55.51
61.06
X
L-H3505
Gas filter ABEK1 (297) organic vapour such as solvents and inorganic vapour, acid gas and ammonia
61.20
67.32
X
Chemical Transfer
Quick Guide »» Easy and accurate chemical transfer is achieved with the Flowserve range of chemical transfer units
SHUSF-1105PTS
»» Each pump has nylon housing with Viton seals to ensure maximum performance for today’s agricultural chemicals
L-H9353B
SHUSF-1105
58
$ (INC. GST) PROD. CAT.
138.04
SHUFM-1100
L-H9556
»» A multiple pump-chamber design ensures long life and durability
L-H9562
ORDER CODE
DESCRIPTION
SHUSF-1105PTSI
The Agrunner portable mini bulk transfer system uses a 12 volt Shurflo chemical transfer pump for pumping liquid agricultural chemicals from bulk containers into chemical mixers or spray tanks. The unit has a handy carry frame to protect the pump unit, pump-mounted flow indicator, 6 metres of power cable, shut-off gun, 4 metres discharge hose, and a camlock inlet fitting with shut-off and 4 metres inlet hose
SHUSF-1105
12 volt Shurflo pump unit only, Viton valves, santoprene diaphragms with internal bypass and 6 metre power cable. On/off switch on the pump. 29 L/min output at 15 psi pressure. Draws 14 amps
SHUFM-1100
Pump-mounted electronic flowmeter with LCD display and long-life lithium battery
L-H9353B
60 litre chemical mixer on trolley, no pump
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
1,595.00
1,754.50
X
795.00
874.50
X
360.00
396.00
X
1,795.00
1,974.50
X
L-H9562
3 pin Envirodrum male coupling
450.00
495.00
X
L-H9556
3 pin Envirodrum rinsing socket (must be connected to fresh water source)
242.79
267.07
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Safety with Chemical Application Section 2
Measuring Jugs and Mixing Bucket
L-9001
L-9003
Quick Guide »» A must for measuring and mixing chemicals, and for sprayer or nozzle calibration
L-9005
NEW
TD109024901
L-9025
ORDER CODE
DESCRIPTION
L-H9001
Croplands calibrated 1 litre measuring jug
$ (EX. GST) 12.37
13.61
X
L-H9003
Croplands calibrated 3 litre measuring jug
18.40
20.24
X
L-H9005
Croplands calibrated 5 litre measuring jug
25.18
27.70
X
L-H9025
Croplands heavy-duty 25 litre calibrated mixing bucket with pouring spout
52.07
57.27
X
TD109024901
Quick Check 2 litre calibration jug for quickly and easily calibrating your sprayer. The jug has a scale for a nozzle check from sizes 015 to 06. It will give the application rate (standard 500mm nozzle spacing) from 50–800 litre/Ha at speeds from 5–18 km/h (at max. speed, 200 L/ha is maximum). All the key information such as pressure, application speed, flow rate and application rate can be read off the jug for different nozzle sizes
18.85
20.75
X
Tank and Equipment Cleaner and Protectant
$ (INC. GST) PROD. CAT.
Quick Guide »» Thoroughly clean your sprayer when changing from one pesticide to another with Spraymate™ tank and equipment cleaner »» Powerful detergents remove residues from inaccessible areas in the tank and spray lines L-H9704
ORDER CODE
DESCRIPTION
$ (EX. GST)
L-H9704
Spraymate tank and equipment cleaner, 600g
21.00
$ (INC. PROD. GST) CAT. 23.10
»» It also removes rust and hard water scale and leaves a protective film to prevent corrosion during storage, prolonging the life of your sprayer
X
Spraysuits
Quick Guide
ORDER CODE
DESCRIPTION
$ (EX. GST)
L-H230*
Disposable protective suit. Suitable for single or limited repeat use for protection against dust while mixing chemicals. Not rainfast. *Denotes size as follows: 1 = Medium; 2 = Large; 4 = XL; 5 = XXL
18.33
$ (INC. PROD. GST) CAT. 20.16
X
Gloves
»» Tyvek® Barrier Man Coveralls are disposable coveralls designed to protect workers from hazardous materials, or sensitive products and processes from contamination by people. Available in white, sizes medium to XXL »» Please specify size
Quick Guide L-H700 $ (EX. GST)
$ (INC. PROD. GST) CAT.
ORDER CODE
DESCRIPTION
L-H700*
Nitrile protective spray gloves, 330mm. *Denotes size as follows: 3 = size 10; 5 = size 11
11.25
12.37
X
L-H710*
Nitrile protective spray gloves, long, 460mm. *Denotes size as follows: 2 = size 9; 3 = size 10; 4 = size 11
21.20
23.32
X
L-H7003
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
»» Offers resistance to solvents and oils with good flexibility and dexterity. Excellent abrasion and puncture resistance »» Sizes: 9–11. Please specify size
Optima BUYERS’ GUIDE – JANUARY 2014
59
Section 2
Firefighters
Firefighters
US400/FF with Honda/Onga pump
Shown left – 3 metre external suction kit comes standard with all Croplands complete firefighter units US1100/FF with Honda/Onga pump
US500/FF1
Did you know? All Croplands firefighters are powered by genuine Honda motors. The Honda motor uses an advanced electronic ignition with automatic compression release providing effortless starts in all weather and conditions.
SHUB55H
BT1100/FF
60
SHUMB25LK
ORDER CODE
DESCRIPTION
SHUMB25LK
Miniblaze firefighter kit, 2.5HP petrol motor. Also suitable for tank filling and general water transfer. Kit includes a 2.5HP close coupled 4-stroke petrol motor, powder coated alloy pump casing, quick fill priming port, 1” discharge, 5 metres of 20mm fire hose with nozzle, 2.5 metres of 25mm suction hose with filter plus tool kit. Flow rate range from 50 to 150 L/min depending on pressure
SHUB55H
PROD. CAT.
$ (EX. GST)
$ (INC. GST)
499.00
548.90
X
Honda GX160 powered Onga firefighter pump. Also suitable for tank filling, water transfer and some irrigation situations. Industrial grade nylon impeller, powder-coated high-grade alloy pump casing, 3-way discharge outlets, close coupled direct engine drive, large carry handle and light weight. Large 1½” priming port for quick prime and flow rate from 100 to 500 L/min depending on required pressure (in the 2–5 bar range). Note – price for pump unit only
1,199.00
1,318.90
X
US400/FF
400 litre firefighter comes with Honda GX160 powered Onga firefighter pump (as described above), firefighting reel with 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit
3,675.45
4,043.00
X
US500/FF1
500 litre firefighter unit on steel skid frame – Honda GX160 powered Onga pump fitted with 500 litre round tank mounted on skid frame – complete with 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit
3,650.00
4,015.00
X
US800/FF
As for US400/FF, but fitted with an 800 litre tank (not pictured)
4,295.45
4,725.00
X
US1100/FF
1100 litre firefighter with free-standing tank, Honda GX160 powered Onga firefighter pump (as described above), firefighting reel with 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit
4,620.00
5,082.00
X
BT1100/FF
1100 litre trailing firefighter comes with fully galvanised chassis, sprung axle, 11.5/80 x 15.3 tubeless tyres, Honda GX160 powered Onga firefighter pump (as described above), 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit
6,354.55
6,990.00
X
BT1500/FF
As BT1100/FF, but fitted with 1500 litre tank
6,618.18
7,280.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 2
Grain storage and hay baling applications
Grain storage and hay baling applications
Quick Guide Baler Preservative Applicator System
»» Safely bale at higher moisture levels »» Aids in lower leaf loss »» Assists in higher nutritional levels »» More efficient use of machinery
»» Reduce likelihood of spontaneous combustion »» Upgradeable to include in-cab monitoring and alarm system, see option details below »» Suitable for all hay additives sold in Australia and New Zealand Intake auger applicator, L-H9353-2100
Grain kit, UGA12V
»» Nozzle and pressure calculator available online at: www.gazeeka.com.au/calc.html
Optional Controller for Baler Applicators In-cab control system for the 100 litre and 200 litre baler application units Features: »» Automatic calculation of pressure from dose rate and TPH »» Automatic pressure control by pump speed control »» Pressure monitoring displayed in the tractor cab »» Pump on/off control from tractor cab »» Visual and audible alarms for maximum/ minimum pressure 200 litre square baler preservative applicator, BS200F
Intake™ Auger Applicator
»» Use to apply fungicides such as Intake™ to fertiliser on grain augers »» Can also be used to apply seed dressings »» Bypass agitator provides constant agitation »» Customisable to suit your own set-up »» Constant agitation allows use of viscous liquids »» Available in standard and high flow models
12 Volt Grain Kit 100 litre round baler preservative applicator, RB100F
This 12 volt grain kit attaches to the auger and provides a simple way of putting preservative on your grain.
Baler application unit ORDER CODE
DESCRIPTION
RB100F
100 litre round baler preservative applicator
$ (EX. GST) 1677.27
$ (INC. GST) PROD. CAT. 1,845.00
W
RB100F485
100 litre round baler preservative applicator with in-cab control system
4,700.00
5,170.00
W
BS200F
200 litre square baler preservative applicator
2,163.64
2,380.00
W
BS200F485
200 litre square baler preservative applicator with in-cab control system
5,550.00
6,105.00
W
BS200F485/QS30
200 litre square baler preservative applicator with in-cab control system and infrared sensor
6,700.00
7,370.00
W
Auger application system and 12 volt Grain application kit ORDER CODE
DESCRIPTION
L-H9353-2100A
60 litre auger applicator with 4.6 L/min pump
1,795.45
1,975.00
W
L-H9353-252A
60 litre auger applicator with 25 L/min pump
2,395.45
2,635.00
W
UGA12V
Grain application kit, 12 volt
702.73
773.00
X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
61
Section 2
sprayer Tanks
Spray tanks
D1
F1
X E1 Y Z
All tanks are supplied with a lid and outlet. All prices are ex-store. Dimensions may change without notice. Position
Litre Capacity
L
Dimensions (mm) W
H
Strainer
Freestanding
P100L
A
100
440
440
810
No
Yes
224.55
247.00
X
P60L
B
60
440
440
545
No
Yes
202.92
223.21
X
P50
H
50
450
410
400
Yes
No
196.14
215.75
X
P120
I
120
610
470
600
Yes
No
256.48
282.13
X
P30
J
30
280
280
600
No
No
200.25
220.28
X
P300
K
300
1,100
550
550
Yes
No
394.15
433.56
X
P200
L
200
900
600
600
Yes
No
326.73
359.40
X
P450
M
450
1,070
750
580
Yes
No
516.30
567.93
X
P400C
N
400
1,190
760
650
Yes
No
562.61
618.87
X
P500C
O
500
1,190
760
825
Yes
No
607.56
668.32
X
P1500
P
1,500
1,350
1,200
1,100
Yes
No
1,801.10
1,981.21
X
P1200
Q
1,200
1,350
1,200
950
Yes
No
1,598.18
1,758.00
X
P1000
R
1,000
1,350
1,200
800
Yes
No
1,470.02
1,617.02
X
P500
S
500
1,200
600
1,100
Yes
No
574.50
631.95
X
P700
(not shown)
700
1,350
640
1,200
Yes
No
677.35
745.09
X
Order Code
$ (EX. GST)
$ (INC. GST) PROD. CAT.
P1000L
T
1,000
1,350
800
1,500
Yes
No
1,195.39
1,314.92
X
P2000
U
2,000
2,200
1,300
1,030
Yes
No
1,875.39
2,062.93
X
P3000
V
3,000
2,200
1,300
1,300
Yes
No
2,548.70
2,803.57
X
P4000A
W
4,000
2,200
1,300
1,670
Yes
No
2,989.25
3,288.18
X
P200B
X
200
1,160
580
539
Yes
Yes
612.34
673.57
X
P400
Y
400
1,490
627
760
Yes
Yes
1,149.33
1,264.26
X
P800
Z
800
1,740
1,000
770
Yes
Yes
1,953.35
2,148.68
X
P125L
D1
125
440
440
960
No
Yes
261.13
287.24
X
P200A
(not shown)
200
1,220
700
510
Yes
No
718.04
789.85
X
P300A
E1
300
1,220
700
610
Yes
No
780.36
858.40
X
P1100
F1
1,100
1,430
1,275
855
Yes
Yes
1,436.86
1,580.55
X
Dimensions may vary from tank to tank.
62
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 3
Nozzle bodies and boom components������������ 64
Nozzle Caps������������������������ 65
Electric control kits, monitors and GPS system��������������������������� 66
monitors and controllers������������������������ 67
Electronic valves and controllers���������������� 68
Electric and manual valve kits and parts���������� 69
Suction filters�������������������� 70
Pressure Filters������������������� 73
Manual ball Valves������������ 74
Agitators, lids and tank fittings����������������������� 75
Sprayer tools��������������������� 76
Windmate���������������������������� 76
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
63
Section 3
Nozzle bodies and filters and boom components
Nozzle Bodies Order Code
DESCRIPTION
QJ17560A-½-NY
Nozzle body, non-drip, ½” fits 22mm O.D. tube
$ (EX. GST) $ (INC. GST) PROD. CAT. 7.40
8.14
Z
QJ17560A-3/4NY
Nozzle body, non-drip,3/4” fits 25.4mm O.D. tube
7.40
8.14
Z
QJ17560A-1-NY
Nozzle body, non-drip,1” fits 33.4mm O.D. tube
7.40
8.14
Z
PR16
Pack of 5 x QJ17560A-½-NY nozzle bodies
39.20
43.12
Z
PR17
Pack of 5 x QJ17560A-¾-NY nozzle bodies
39.20
43.12
Z
QJ7421-*-NYB
TeeJet® split eyelet nozzle body. *½”, ¾” and 1” sizes
6.88
7.57
Z
QJ39685-2-500-N Nozzle body, ½” tee , non drip
11.44
12.58
Z
QJ396851L500-N
Nozzle body, ½” left elbow, non-drip
11.44
12.58
Z
QJ396851R500-N
Nozzle body, ½” right elbow, non-drip
11.44
12.58
Z
PR18
Pack of 5 x QJ39685-1R500-N nozzle bodies
59.40
65.34
Z
PR19
Pack of 5 x QJ39685-1L500-N nozzle bodies
59.40
65.34
Z
PR21
Pack of 5 x QJ39685-2-500-N nozzle bodies
59.40
65.34
Z
QJ363-*-NYB
Triple wet boom nozzle body in *½”, *¾” and *1” sizes.
26.48
29.13
Z
QJ363-*-1-NYB
Triple dry boom nozzle body in *500 (½”), *750 (¾”) and *1000 (1”) sizes, single hosetail
33.12
36.43
Z
QJ363-*-2-NYB
Triple dry boom nozzle body in *500 (½”), *750 (¾”) and *1000 (1”) sizes, double hosetail
33.12
36.43
Z
24216-*-NYB
Compact triple wet boom nozzle body in *½”, *¾” and *1” sizes.
35.48
39.03
Z
B716.617.2
Brass high pressure roll-over body, non-drip, with caps
47.84
52.62
Z
A402745
Arag nozzle body for use on MB series and MF series booms. Has 10mm nib.
9.04
9.94
Z
A400101
Screw for nozzle body A402745
1.08
1.19
Z
Nozzle Filters
64
Order Code
Description
$ (EX. GST)
8079-PP-*
TeeJet® polypropylene strainer, *50, *80 or *100 mesh screen
PR51
$ (INC. GST) PROD. CAT.
2.08
2.29
Z
Pack of 10 x 8079-PP-50 strainers
20.80
22.88
Z
PR52
Pack of 10 x 8079-PP-100 strainers
20.80
22.88
Z
4193A-PP-5-*SS
TeeJet® polypropylene strainer with check valve for 5 psi, *50 or *100 mesh screen
6.68
7.35
Z
4193A-5-*SS
TeeJet® brass strainer with check valve for 5 psi, *50 or *100 mesh screen
8.52
9.37
Z
4067-SS-*
TeeJet® cup strainer, *50 or *100 mesh screen
2.64
2.90
Z
4514-NY-*
TeeJet® nylon slotted strainer, for suspended solids, *10, *20 and *32
2.16
2.38
Z
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 3
Nozzle Caps
Nozzle caps
Quick TeeJet Cap
CAP COLOUR OPTIONS
CP19438-EPR (EPDM Standard) CP19438-VI (Viton Optional Standard)
Quick TeeJet Seal
1
2
3
4
5
6
7
8
10
Black
White
Red
Blue
Green
Yellow
Brown
Orange
Lilac
ORDER CODE CAP
NOZZLES/SEALS TO SUIT CAPS
* Denotes colour code as shown above – not all colours may be available.
DESCRIPTION
• AirMix • TeeJet XR, DG, TT, AIXR (smaller capacities to size 08) • ALBUZ AXI, ADI, CVI, CVI TWIN, CVI 80
25612-*-NYR
Cap and seat gasket set
$ (EX. GST) $ (INC. GST) PROD. CAT.
1.51
1.66 Z
PR20-*
Pack of 10 caps and seats
15.00
16.50
CP19438-EPR
Seal for nozzle caps, EPDM
0.84
0.92
PR60
Pack of 10 seals for nozzle caps
7.06
7.77
• Seal for use with nozzle caps
CP19438-VI
Seal for nozzle caps, viton
4.37
4.81
Z
• TeeJet XR, DG, TT and AIXR flat spray tips (for sizes 10 to 20)
25610-*-NYR
Cap and seat gasket set
1.75
1.93
Z
• TeeJet flat spray tips (smaller capacities) – see above. Tips can be positioned in choice 25596-*-NYR of 2 spray plane directions: parallel or perpendicular to wings of Quick TeeJet cap.
Cap and seat gasket set
1.75
1.93
Z
• TJ TwinJet / TJ60-Spray Tip / ALBUZ AVI, AVI TWIN, ESI, EXA, AIUB TeeJet / TTI Airinduction Turbo TeeJet SJ3 StreamJet
25598-*-NYR
Cap and seat gasket set
1.75
1.93
Z
• TF-VS Turbo FloodJet / TK-VS FloodJet
25600-*-NYR
Cap and seat gasket set
1.75
1.93
Z
• TK FloodJet / FL FullJet / TX ConeJet / TG Full Cone
25608-*-NYR
Cap and seat gasket set
1.75
1.93
Z
• Ceramic Disc-Core/TXB Conejet • ALBUZ TVI, ATR
26278-1-NYR
Cap and seat gasket set
1.89
2.08
Z
• For use with Hardi nozzle bodies »» TeeJet flat fan spray tips »» Turbo TeeJet spray tips »» AirMix nozzles
23306H-1-CELR
Cap and seat gasket for Hardi Retro-fit cap to suit Hardi Spray bodies. Available in black only
1.79
1.96
Z
• For use with Hardi nozzle bodies »» TJ TwinJet »» AI TeeJet, AIUB TeeJet spray tips flat »» TTI Air-induction Turbo TeeJet
21398H-1-CELR
Cap and seat gasket for Hardi Retro-fit cap to suit Hardi Spray bodies. Available in black only
1.79
1.96
Z
• Seal for use with nozzle caps
Z
Order Code
Description
CP1325
TeeJet brass 11/16” threaded cap
2.28
2.51
Z
CP8027-NYB
TeeJet® nylon 11/16” threaded cap
1.33
1.46
Z
CP8027-1-NYB
TeeJet® nylon 11/16” threaded cap, extra long
1.75
1.93
Z
CP3942
TeeJet® brass blanking plug
0.72
0.79
Z
19843-NYR
Blanking cap with seal, black only
3.33
3.66
Z
QJ90-2-NYR
Twin-Cap quick adaptor with seal
8.12
8.93
Z
QJ4676-¼-NYR
QJ Adaptor cap comes with gasket and ¼” female thread
3.92
4.31
Z
QJ4676-90-¼-N
QJ Adaptor cap, 90°, comes with gasket and ¼” female thread
6.58
7.24
Z
®
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
65
Section 3
Electronic Controllers and monitors
Electric control kits, monitors and GPS system Croplands have an excellent range of electric controls and monitors for all spraying and spreading operations. If you have a sprayer with manual controls and need to upgrade to electrics, or if your current set up is ageing and not up to the job, consider the electric kits for low pressure boomsprayers, or high pressure orchard sprayers (20 and 40 bar kits) as listed below. If you need a monitor simply for measuring area, or a fully auto rate control, take a look at what Croplands has to offer.
I-E2032W wireless control
I-S4021
Electric control kits – up to 20 bar pressure for linkage and boomsprayers ORDER CODE
DESCRIPTION
I-E2012A
Electric in-cab controller with switch box; one electric on/off valve shuts the complete boom off from the cab. Includes three manual taps so boom sections can be manually selected, along with a pressure regulating valve for setting manual spraying pressure, plus a gauge. Complete kit will fit up to your sprayer.
$ (EX. GST)
I-E2032A
I-E2032W
$ (INC. GST) PROD. CAT.
526.36
579.00
X
Electric in-cab controller with switch box; three-section electric valves to control three boom sections from the cab. Included is an electric pressure regulating valve also operated from the switchbox,, and a manual pressure regulating valve for setting spraying pressure, plus a gauge. Complete kit will fit up to your sprayer. All cables included
1,540.00
1,694.00
X
Wireless controller; no cables to the cab. Three-section electric valves to control three boom sections from the wireless control. Included is an electric pressure regulating valve also operated from the control panel, and a manual pressure regulating valve for setting spraying pressure, plus a gauge on the spray manifold. Complete kit will fit up to your sprayer.
2,195.45
2,415.00
X
Electric control kits – up to 40 bar pressure for orchard sprayers with cabs ORDER CODE
DESCRIPTION
I-S4020
2-section on/off electric controller with 12 volt brass solenoid valves (2 x B200.1915.1) for left and right shut-off and master dump valve with bypass to tank to avoid any pressure spike. Manual PRV, self-cleaning pressure filter, gauge and 2-section switchbox with master on/off; cables included in the kit
$ (EX. GST)
$ (INC. GST) PROD. CAT.
1,250.00
1,375.00
X
I-S4021
2-section on/off electric controller with 12 volt brass solenoid valves (2 x B200.1915.1) for left and right shut-off, master dump valve with bypass to tank to avoid any pressure spike and electric pressure regulating valve to adjust pressure from the switchbox. Manual PRV, self-cleaning pressure filter, gauge and switchbox with cables included in the kit
2,290.00
2,519.00
X
Raven Cruizer II™ GPS System
Cruizer II gives you greater accuracy and efficiency all season from tillage to seeding, spraying and harvesting. »» Ability to record field markers »» Optional weather-resistant model for rain/dust protection »» Built-in 10 Hz DGPS receiver and in open-cab situations external Helix antenna for accurate sub-meter guidance »» Interfaces with Raven’s new SmartYield™ monitoring system »» Record keeping and coverage maps for superior crop management made simple with file formats for saving, reporting and importing data »» Ability to save job files and A-B lines »» Integrated CANbus technology for adding Raven assisted steering and automatic boom section control on Raven SCS consoles only
66
ORDER CODE
DESCRIPTION
RV117-0171-249
Cruizer II guidance with Helix antenna kit and E-Diff correction
www.croplands.com.au
RV117-0171-249 $ (EX. GST) 3,790.00
$ (INC. GST) PROD. CAT. 4,169.00
W
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 3
Monitors and Controllers
Monitors and Controllers From a simple area meter and flow monitor to a fully auto rate spray controller, you will find some ideal solutions to help your farming or fruitgrowing become more efficient. $ (EX. GST)
$ (INC. PROD. GST) CAT.
ORDER CODE
DESCRIPTION
MT01000
Calc-an-acre II area/speed/pump speed/ distance meter. Ideal for fitting to any implement or vehicle where a record of area covered, travel speed or distance measurement is required. Liquid crystal backlit display for day/night use. Can store up to 3 separate areas at once
A4670610SR100
The Visio is an innovative multi-function viewer for use with a variety of sensors utilising selectable software to detect inputs such as pressure, flow, and speed. The A4670610-SR100 kit includes the necessary cables, a 40 bar rated 5-100 litre/min flowmeter and the Visio console to act s as the spray rate monitor capable of displaying speed, flow and spray rate in L/Ha. Area and total liquid used, in litres, is stored in the memory. Fittings and some plumbing will be necessary to fit this to an existing sprayer, along with fitting the speed sensor
990.00 1,089.00
X
A4670610SR200
The Visio is an innovative multi-function viewer for use with a variety of sensors utilising selectable software to detect inputs such as pressure, flow, and speed. The A4670610-SR200 kit includes the necessary cables, a 40 bar rated 10-200 litre/min flowmeter and the Visio console to act s as the spray rate monitor capable of displaying speed, flow and spray rate in L/Ha. Area and total liquid used, in litres, is stored in the memory. Fittings and some plumbing will be necessary to fit this to an existing sprayer, along with fitting the speed sensor
990.00 1,089.00
X
A4670610HA
The A4670610-HA kit includes the necessary cables and a speed sensor plus the Visio console to act as a hectare meter capable of displaying speed and area. The speed sensor will require fitting to a vehicle or wheel.
690.00
759.00
X
MTSMATEARAG3
Spraymate 3-section auto rate controller complete with all wiring looms, hardware, a rapid-check flowmeter and 3 motorised boom-section valves for fitting to an existing boomsprayer as an upgrade for manual or basic electric controls. This kit comes with all the components for a complete upgrade. The controller console can display litres per hectare, speed, and flow. Suitable for applications up to 20 bar pressure
4,120.00 4,532.00
X
BRAVO180ARAG3
BRAVO 180 3-section auto rate controller complete with all wiring looms, hardware, a rapid-check flowmeter and 3 motorised boom-section valves for fitting to an existing boomsprayer as an upgrade for manual or basic electric controls. This kit comes with all the components for a complete upgrade. This new generation auto-rate controller has many new functions including a USB drive for data transfer, 10 storage options for configuration and can display multiple information on scren
4,320.00 4,752.00
G8212008
New for 2014 is an innovative system to monitor the level of liquid in a tank utilising the specific gravity of the liquid rather than having a level sensor. This way the tank can be on an angle or slope and the level can still be accurately measured. Ideal for spraying in undulating country so you know what you have left in the tank
726.36
799.00
Y
MT01000
A4670610
MTSMATE-ARAG3
790.00
869.00
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
X
X
BRAVO180-ARAG3
Optima BUYERS’ GUIDE – JANUARY 2014
67
Section 3
Electric controls and valves
Electric controls and valves 9 8 8
POL41316399
POL413003AK.CR
4
3
7
6
5
A473CCRO01
4 3
2
1
A471CCRO01
A471CCRO02
A471CCRO03
A4628707
Electric Control Manifolds and Switchboxes ORDER CODE
DESCRIPTION
A471CCRO01
Control manifold for auto-rate controllers, for pumps up to 180 L/min, manual PRV, electric bypass (7 sec), dump valve, 80-mesh flushing filter, rapid-check Polmac flowmeter, mounting brackets (boom shut-off valves not included, see page 40)
$ (EX. GST)
$ (INC. GST) PROD. CAT.
1,540.00
1,694.00
Y
A473CCRO01
Control manifold for auto-rate controllers, for pumps up to 280 L/min, manual PRV, electric bypass (7 sec), dump valve, 80-mesh flushing filter, rapid-check Polmac flowmeter, mounting brackets (boom shut-off valves not included, see page 40)
1,680.00
1,848.00
Y
A471CCRO02
Control manifold for basic electric control systems. Max flow 180 L/min, 20 bar rated. Kit incudes manual PRV, Regulating valve, dump valve, pressure filter and 3 proportional electric boom shut-off valves
1,680.00
1,848.00
Y
A471CCRO03
Control manifold for basic electric control systems. Max flow 180 L/min, 20 bar rated. Kit incudes manual PRV, Regulating valve, dump valve, pressure filter and 5 proportional electric boom shut-off valves
2,190.00
2,409.00
Y
A4628707
Highly accurate programmable flowmeter with LCD display and sapphire bearing paddle turbine. 40–800 L/min reading of actual flow, or you can view litres pumped. 2 separately resettable counters. 2 x AA batteries required. Will require T7 male fittings.
999.00
1,098.90
Y
Control Manifold Components Valves, filters and flowmeters to repair/update your control manifold. Part Ref ORDER CODE
68
MAX PRESS
MAX FLOW
PORTS/BYPASS
1
A471502
DESCRIPTION Dump valve/PRV/inlet assembly
20 bar
180 L/min
32mm
430.00
473.00
Y
2
A463024S
Electric bypass valve, 7 second open/close
20 bar
150 L/min
25mm
293.64
323.00
Y
3
A32621135
80-mesh flushing filter with manifold flanges
20 bar
150 L/min
40mm
80.00
88.00
Z
4
POL00375908A
Polmac rapid-check flowmeter with flanges
20 bar
100 L/min
40mm
550.00
605.00
Y
5
A473001T
Dump valve, hi-flow, 0.6 sec
20 bar
120 L/min
32mm
359.00
394.90
Y
6
A473020S
Electric bypass valve, hi-flow, 7 second open/close
20 bar
150 L/min
25mm
345.36
379.90
Y
7
A465522
Manual PRV
20 bar
200 L/min
32mm
154.59
170.05
Y
8
POL413003AK.CR Flow sensor square amp wave
–
–
–
195.00
214.50
Y
–
UP-402
Proximity sensor BA and HV4000
–
–
–
195.00
214.50
Y
9
POL41316399
Rapid check unit ZF 10–100LPM
–
–
–
295.00
324.50
Y
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 3
Electric and manual valve kits and parts
Electric and manual valve kits A
D
A463011ST
A463001ST
A463CCRO06
B
Valve mounting kits
E
C F Valve adaptors
A463051
A463CCRO09
A463CCRO10
A463CCRO05
Valve Mounting Kits To make up your own bank of 2-wire or 3-wire motor valves (see below for valve options), order the correct kit for bolts, nuts and O-rings as shown. For end-caps and inlet/ outlet fittings, see the valve adaptors section below. ORDER CODE
DESCRIPTION
A463000.920
Kit for 2 valves, 150mm
$ (EX. GST) 25.89
$ (INC. GST) PROD. CAT. 28.48
Y
A463000.930
Kit for 3 valves, 207mm
29.64
32.60
Y
A463000.940
Kit for 4 valves, 264mm
33.85
37.24
Y
A463000.950
Kit for 5 valves, 321mm
39.41
43.35
Y
A463000.970
Kit for 7 valves, 436mm
50.79
55.87
Y
Valve AdaptOrs On the inlet and outlet of each motor valve there is a range of adaptors and fittings commonly used to go with the mounting kit (above). Use the valve adaptors diagram above to choose the adaptors/fittings you require. ORDER CODE
DESCRIPTION
$ (EX. GST)
$ (INC. GST) PROD. CAT.
A463000.130
Male adaptor (A) ¾” (BSP)
7.04
7.74
Y
A463000.140
Male adaptor (A) 1” (BSP)
7.04
7.74
Y
A463011.120
End cap (B)
2.12
2.33
Y
A463011.130
Pressure gauge adaptor (C) ¼” (BSP)
15.00
16.50
Y
A463000.030
Male adaptor (D) ¾” (BSP)
6.16
6.78
Y
A463000.040
Male adaptor (D) 1” (BSP)
6.16
6.78
Y
A463000.050
Male adaptor (D) 1 ¼” (BSP)
6.16
6.78
Y
A463011.110
End cap (E)
2.80
3.08
Y
A463001.113
Hosetail (F) 13mm
5.84
6.42
Y
A463001.116
Hosetail (F) 16mm
5.84
6.42
Y
A463001.119
Hosetail (F) 19mm
5.84
6.42
Y
A463001.125M Hosetail (F) 25mm
6.56
7.22
Y
AG10071V
1.08
1.19
Y
O-ring to suit flanges (Viton)
Electric and Manual Valves If you are updating your spraying control system, Croplands has a wide range of valves and valve kits to suit your application. ORDER CODE
DESCRIPTION
A463011ST
Single electric boom shut-off valve, 3-wire for use with auto-rate controllers or basic electric controls, with bypass (suitable for 2 and 3-wire applications)
330.00
363.00
Y
A463001ST
Single electric boom shut-off valve, 3-wire for use with auto-rate controllers or basic electric controls (suitable for 2 and 3-wire applications)
320.00
352.00
Y
A473001T
Electric boom shut-off valve, high flow (120 L/min), 3-wire for use with auto-rate controllers
360.00
396.00
Y
A463CCRO05
Electric valve bank, 3-section complete with flushing tap, gauge port and mounting brackets
1,075.00
1,182.50
Y
A463CCRO06
Electric valve bank, 5-section complete with flushing tap, gauge port and mounting brackets
1,730.00
1,903.00
Y
A463CCRO09
2-bank manual valves complete with mounting brackets, 20 bar
135.00
148.50
Y
A463CCRO10
3-bank manual valves complete with mounting brackets, 20 bar
169.00
185.90
Y
A463051
Manual shut-off valve, 13mm tail, 20 bar
46.99
51.68
Z
A463050
Blank ARAG valves
30.30
33.33
Z
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
69
Section 3
Suction Filters
Suction Filters ORDER CODE
Thread/ BAyonet SIZE
DESCRIPTION
INOX MESH
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
319 SERIES Suction filters A319092
Suction filters series 319, 3” BSP threads, filtering capacity 400–800 L/min, cartridge Ø 145 x 320mm, polypropylene body, EPDM gaskets, brass fixing inserts
A319093 A3190935
3”
32
184.55
203.00
Z
3”
50
184.55
203.00
Z
3”
80
184.55
203.00
Z
319 Screen A335002.030
–
32
79.09
87.00
Z
A335003.030
–
50
79.09
87.00
Z
For 319 series
A3350035.030 A335004.030
–
80
79.09
87.00
Z
–
100
79.09
87.00
Z
317 SERIES Suction filters A317072 Suction filters series 317, 2” and 2½” BSP threads, filtering capacity 200–260 L/min, cartridge Ø 107 x 286mm, polypropylene body, EPDM gaskets, brass fixing inserts
A317073 A317083 A3171735
Suction filters series 317, 2” BSP threads, automatic shut-off valve to clean the filter, auxiliary suction inlet to fill the tank, valve release knob, filtering capacity 200–260 L/min, cartridge Ø 107 x 286mm, polypropylene body, EPDM gaskets, brass fixing inserts
A317472 A317473 A317474
2”
32
104.55
115.00
Z
2”
50
104.55
115.00
Z
2½”
50
126.36
139.00
Z
2”
80
104.55
115.00
Z
2”
32
119.09
131.00
Z
2”
50
125.45
138.00
Z
2”
100
125.45
138.00
Z
317 and 333 Screen A317002.030
–
32
51.82
57.00
Z
A317003.030
–
50
51.82
57.00
Z
For 317 and 333 series
A3170035.030 A317004.030
–
80
51.82
57.00
Z
–
100
51.82
57.00
Z
Common Parts A316000.050
Main housing O-ring
–
–
6.84
7.52
Y
A316300.060
Filter screen O-ring
–
–
4.96
5.46
Y
A3160F2 A3160F3 A3160F35
Suction filters series 316 fork coupling T7, fork coupling T7, filtering capacity 160–220 L/min, cartridge Ø 107 x 200mm, polypropylene body, EPDM gaskets, brass fixing inserts
T7 T7 T7
32 50 80
89.09 89.09 89.09
98.00 98.00 98.00
Z Z Z
A316162
1½”
32
89.09
98.00
Z
A316163
1½”
50
89.09
98.00
Z
1½”
80
89.09
98.00
Z
1½”
100
89.09
98.00
Z
2”
50
89.09
98.00
Z
A3161735
2”
80
89.09
98.00
Z
A3165635
1½” 2” (short thread) 2”
80
118.18
130.00
Z
316 SERIES Suction filters
Suction filters series 316, 1½” and 2” BSP threads, filtering capacity 160–220 L/min, cartridge Ø 107 x 200mm, polypropylene body, EPDM gaskets, brass fixing inserts
A3161635 A3161634 A316173
Suction filters series 316, automatic shut-off valve to clean the filter, auxiliary suction inlet to fill the tank, valve release knob, 1½” and 2” BSP threads, filtering capacity 160–220 L/min, cartridge Ø 107 x 200mm, polypropylene body, EPDM gaskets, brass fixing inserts
A316472 A316572 A316573 A3165735
32
118.18
130.00
Z
32
118.18
130.00
Z
2”
50
118.18
130.00
Z
2”
80
118.18
130.00
Z
316 Screen A316002.030
–
32
42.73
47.00
Z
A316003.030
–
50
42.73
47.00
Z
For 316 series
A3160035.030 A316004.030
–
80
42.73
47.00
Z
–
100
42.73
47.00
Z
Common Parts A316000.050
Main housing O-ring
–
–
6.84
7.52
Y
A316300.060
Filter screen O-ring
–
–
4.96
5.46
Y
ARAG Filter Screen Sizes (Note: sizes not available for all filter models)
70
Old Colour (Pre-2011)
New ISO Colour
Hole Size stainless steel (mm)
Micron Size (stainless steel mesh)
16 mesh
Black
Brown Red
1.32
1320
32 mesh
White
Red
0.59
594
50 mesh
Light Blue
Blue
0.36
365
80 mesh
Grey
Yellow
0.23
229
100 mesh
Red
Green
0.17
173
120 mesh
Green
Grey
0.15
144
150 mesh
Orange
Orange
0.11
114
200 mesh
Yellow
Pink
0.08
76
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 3
Suction Filters
ORDER CODE
DESCRIPTION
A314452
Suction filters series 314, 1¼” and 1 ½” BSP threads, filtering capacity 100–160 L/min, cartridge Ø 80x170mm, polypropylene body, EPDM gaskets, brass fixing inserts
Thread/ BAyonet SIZE
INOX MESH
$ (EX. GST)
$ (INC. GST)
1¼”
32
65.45
72.00
Z
1½”
50
65.45
72.00
Z
1½” 1½” (short thread) 1½” (short thread) 1½”
80
65.45
72.00
Z
50
89.09
98.00
Z
80
89.09
98.00
Z
PROD. CAT.
314 SERIES Suction filters A314063 A3141635 A314463 A3144635 A314562
Suction filters series 314, automatic shut-off valve to clean the filter, auxiliary suction inlet to fill the tank, valve release knob, filtering capacity 100–160 L/min, cartridge Ø 80x170mm, polypropylene body, EPDM gaskets, brass fixing inserts
32
89.09
98.00
Z
1½”
50
89.09
98.00
Z
A3145635
1½”
80
89.09
98.00
Z
A3145640
1½”
100
75.00
82.50
Z
A314563
314 Screen A314002.030
–
32
32.73
36.00
Z
A314003.030
–
50
32.73
36.00
Z
A3140035.030
For 314 series
A314004.030
–
80
32.73
36.00
Z
–
100
32.73
36.00
Z
Common Parts A314000.050
Main housing O-ring
–
–
4.00
4.40
Y
A314300.060
Filter screen O-ring
–
–
4.96
5.46
Y
A312052
Suction filters series 312, 1¼” BSP threads, filtering capacity 60–100 L/min, cartridge Ø 70x148mm, polypropylene body, EPDM gaskets, brass fixing inserts
32
35.45
39.00
Z
50
35.45
39.00
Z
312 SERIES Suction filters A312153
1¼” (short thread) 1¼”
312 Screen A312007.030
–
16
20.00
22.00
Z
A312002.030
–
32
20.00
22.00
Z
A312003.030
For 312 series
A312004.030
–
50
20.00
22.00
Z
–
100
20.00
22.00
Z
Common Parts A310000.050
Main housing O-ring
–
–
3.24
3.56
Y
A462200.040
Filter screen O-ring
–
–
7.52
8.27
Y
A3102158
Suction filters series 310, 1¼” BSP threads, filtering capacity 60 L/min, cartridge Ø 70x100mm, polypropylene body, EPDM gaskets, brass fixing inserts
310 SERIES Suction filters A310153
1 ¼”
32
27.27
30.00
Z
1 ¼”
50
27.27
30.00
Z
310 Screen A310008.030 A310003.030
For 310 series
–
32
15.55
17.10
Z
–
50
17.00
18.70
Z
Common Parts A310000.050
Main housing O-ring
–
–
3.24
3.56
Y
A462200.040
Filter screen O-ring
–
–
7.52
8.27
Y
A309953
Mini suction filter series 309, filtering capacity 20 L/min, cartridge Ø 27mm x 69mm. ½” female flynut inlet and 13mm hose-tail outlet Mini suction filter series 309, filtering capacity 20 L/min, cartridge Ø 27mm x 69mm. ½” bayonet inlet and 13mm hose-tail outlet
½”
50
15.00
16.50
Z
½”
50
14.55
16.00
Z
– –
50 80
14.55 14.55
16.00 16.00
Z Z
–
100
14.55
16.00
Z
309 SERIES Suction filters
A309B53
309 Screen A322003.030 A3220035.030
For 309 series
A322004.030
Pegasus sprayers at Croplands Adelaide production facility
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
71
Section 3
Suction Filters pressure filters
Suction Filters and Pressure Filters ORDER CODE
DESCRIPTION
A333072
2” screen filling filters SERIES 333, 2” BSP threads, filtering capacity 23m3/h, cartridge Ø 107 x 286mm, polypropylene body, EPDM gaskets, working pressure 8 bar max (116 psi max), draining thread ¾” BSP (open), double attachment for ¼” F BSP pressure gauge
Thread/ BAyonet SIZE
INOX MESH
$ (EX. GST)
$ (INC. GST)
PROD. CAT.
2”
32
206.36
227.00
Z
2”
120/32
219.09
241.00
Z
333 SERIES Suction filters
A333275
Common Parts A333000.050
Main housing O-ring
–
–
8.29
9.12
Y
A316305.060
Filter screen O-ring
–
–
7.57
8.32
Y
A335092
3” screen filling filters SERIES 335, 3” BSP threads, filtering capacity 46m3/h, cartridge Ø 145 x 320mm, polypropylene body, EPDM gaskets, working pressure 8 bar max (116 psi max), draining thread 1” BSP (open), double attachment for ¼” BSP F pressure gauge, stainless steel clamp
3”
32
325.45
358.00
Z
3”
100/32
380.91
419.00
Z
335 SERIES Suction filters
A3352294
335 Screen A3352204.030
–
100/32
89.00
97.90
Z
–
120/32
89.00
97.90
Z
–
–
49.80
54.78
Y
½”
32
30.91
34.00
Z
½”
50
30.91
34.00
Z
½”
100
30.91
34.00
Z
¾”
50
30.91
34.00
Z
A3242034
¾”
100
30.91
34.00
Z
A322002.030
–
32
14.55
16.00
Z
50
14.55
16.00
Z
80
14.55
16.00
Z
100
14.55
16.00
Z
A3352205.030
For 335 series
Common Parts A335000.040
Locking clamp
324-2 SERIES Suction filters A3242022 A3242023 A3242024 A3242033
Line filters series 324-2, male and female threads ½”, ¾” BSP, max. working pressure 14 bar, filtering capacity 80÷100 L/min, cartridge Ø 38x89mm, fixing points on both sides, polypropylene body, EPDM gaskets
324 ½” ¾” Screen A322003.030 A3220035.030
For ½” and ¾” 324 series
A322004.030
–
Common Parts A322000.040
Main housing O-ring
–
–
1.60
1.76
Y
A322000.050
Filter screen O-ring
–
–
1.04
1.14
Y
A3244043
Line filters series 324-2, male and female threads 1” BSP, max. working pressure 14 bar, filtering capacity 80÷100 L/min, cartridge Ø 38x89mm, fixing points on both sides, polypropylene body, EPDM gaskets
1”
50
41.82
46.00
Z
1”
80
41.82
46.00
Z
1”
100
41.82
46.00
Z
Complete Filter A32440435 A324044
324 1” Screen A323002.030
–
32
16.36
18.00
Z
A323003.030
–
50
16.36
18.00
Z
A3230035.030
For 1” 324 series
A323004.030
–
80
16.36
18.00
Z
–
100
16.36
18.00
Z
Common Parts AG11017
Main housing O-ring
–
–
1.60
1.76
Y
A322000.050
Filter screen O-ring
–
–
1.04
1.14
Y
328-2 SERIES Suction filters A3282053
1¼”
50
85.45
94.00
Z
A3282054
1¼”
100
85.45
94.00
Z
1½”
32
85.45
94.00
Z
1½”
50
85.45
94.00
Z
1½”
80
85.45
94.00
Z
1½”
100
85.45
94.00
Z
A3282062 A3282063 A32820635
Line filters series 328-2, 1¼” and 1½” BSP threads, max. working pressure 15 bar, filtering capacity 200÷280 L/min, cartridge Ø 58x210mm, fixing points on both sides, polypropylene body, EPDM gaskets
A3282064
328-2 Screen A326002.030
–
32
30.91
34.00
Z
A326003.030
–
50
30.91
34.00
Z
A3260035.030
For 328-2 series
A326004.030
–
80
30.91
34.00
Z
–
100
30.91
34.00
Z
Common Parts
72
AG10090
Main housing O-ring
–
–
3.60
3.96
Z
AG10052
Filter screen O-ring
–
–
1.20
1.32
Z
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 3
Suction Filters and pressure filters
70mm x Ø27
146mm x Ø35
SIZE
MESH
MAX. FLOW (L/min)
MAX. PRESS (Bar)
Filter 122mL poly
½”
50
45
10
29.09
32.00
Z
AAB122ML-12-P80
Filter 122mL poly
½”
80
45
10
29.09
32.00
Z
AAB122ML-12P100
Filter 122mL poly
½”
100
45
10
29.09
32.00
Z
ORDER CODE
DESCRIPTION
AAB122ML-12-P50
201mm x Ø57 1¼” and 1½” filters
PROD. CAT.
AAB122ML34PP50
Filter 122mL poly
¾”
50
60
10
29.09
32.00
Z
AAB122ML34PP80
Filter 122mL poly
¾”
80
60
10
29.09
32.00
Z
AAB122ML34PP100
Filter 122mL poly
¾”
100
60
10
29.09
32.00
Z
CP23174-1-304
Screen 16 mesh – grey
–
16
–
–
9.18
10.10
Z
CP23174-2-304
Screen 30 mesh – yellow
–
30
–
–
9.18
10.10
Z
CP45102-3-SSPP
Screen 50 mesh – red
–
50
–
–
10.09
11.10
Z
CP45102-4-SSPP
Screen 80 mesh – blue
–
80
–
–
10.09
11.10
Z
CP45102-5-SSPP
Screen 100 mesh – green
–
100
–
–
10.09
11.10
Z
CP23173-EPR
Main body O-ring
–
–
–
–
8.00
8.80
Z
AAB126ML-4-* (*specify mesh)
126 series filter with flushing cap, female thread
1”
*50, 80, 100
132
14
49.09
54.00
Z
CP16903-1-SSPP
Screen 16 mesh – grey
–
16
–
–
20.00
22.00
Z
CP16903-3-SSPP
Screen 30 mesh – yellow
–
30
–
–
20.00
22.00
Z
CP16903-4-SSPP
Screen 50 mesh – red
–
50
–
–
20.00
22.00
Z
CP16903-5-SSPP
Screen 80 mesh – blue
–
80
–
–
20.00
22.00
Z
CP16903-6-SSPP
Screen 100 mesh – green
–
100
–
–
20.00
22.00
Z
CP63150-EPR
Bottom cap gasket
–
–
–
–
5.00
5.50
Z
CP50494-EPR
Main body O-ring
–
–
–
–
3.76
41.36
Z
1¼”
*50, 80, 100
223
14
100.00
110.00
Y
1½”
*50, 80, 100
291
14
100.00
110.00
Z
–
16
–
–
27.27
30.00
Z
AAB126ML-5-* (*specify mesh) 200mm x Ø55
$ (EX. GST) $ (INC. GST)
126 series filter with flushing cap, female thread
AAB126ML-6-* (*specify mesh)
126 series filter with flushing cap, female thread
CP15941-1-SSPP
Screen 16 mesh – grey
CP15941-2-SSPP
Screen 30 mesh – yellow
–
30
–
–
27.27
30.00
Z
CP15941-3-SSPP
Screen 50 mesh – red
–
50
–
–
27.27
30.00
Z
CP15941-4-SSPP
Screen 80 mesh – blue
–
80
–
–
27.27
30.00
Z
CP15941-5-SSPP
Screen 100 mesh – green
–
100
–
–
27.27
30.00
Z
CP15941-6-SSPP
Screen 120 mesh – brown
–
120
–
–
27.27
30.00
Z
CP63150-EPR
Bottom cap gasket
–
–
–
–
5.00
5.50
Z
CP48656-EPR
Main body O-ring
–
–
–
–
7.60
8.36
Z
B146.504.1070
Filter M146
–
70
50
50
97.27
107.00
Z
B146-203-16
Screen 40 mesh
–
40
–
–
29.72
32.69
Z
B146-203-19
Screen 70 mesh
–
70
–
–
34.56
38.02
Z
63mm x Ø40
TeeJet Filter Screen Sizes Standard TeeJet Colours
Hole Size stainless steel (mm)
Micron Size (stainless steel mesh)
16 mesh
Grey
1.1
1100
30 mesh
Yellow
0.53
530
50 mesh
Red
0.28
280
80 mesh
Blue
0.18
180
100 mesh
Green
0.15
150
120 mesh
Brown
Not stated
Not stated
200 mesh
Orange
0.08
80
(Note: sizes not available for all filter models)
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
73
Section 3
Manual ball Valves
Manual ball Valves
A453007E99
2 way ball valve
Banjo 2 way ball valve
A453027E99
3 way ball valve
Banjo 3 way ball valve
B176.1501.11
B165.1501.4
Two Way Ball Valves High quality Teflon ball valves with glass reinforced polypropylene housing, Teflon ball and seals, and EPDM gaskets. Female threaded couplings and 3 threaded mountings. Range ½”–3” sizes. Banjo 2 way ball valves feature precision molded in glass reinforced polypropylene for strength and chemical resistance, PTEF seats for smooth operation and proper sealing characteristics, EPDM O-rings to handle most fertilisers and chemicals and double O-rings in stem for extra sealing protection.
POLVTD31300
POLVTD90600
Three Way Ball Valves
ORDER CODE
DESCRIPTION
$ (EX. $ (INC. PROD. GST) GST) CAT.
A454132
Valve ball poly ½” 2 way
25.00
27.50
Z
A454133
Valve ball poly ¾” 2 way
25.00
27.50
Z
A454134
Valve ball poly 1” 2 way
29.00
31.90
Z
A454135
Valve ball poly 1¼” 2 way
47.42
52.16
Z
A454136
Valve ball poly 1½” 2 way
49.78
54.76
Z
A454137
Valve ball poly 2” 2 way
65.27
71.79
Z
A453007E99
Manual ball valve, 80mm 2 way, 8 bar
202.93
223.22
Z
BJSUV100FP
Banjo ball valve 2 way 1” union
34.17
37.59
Y
BJSUV125FP
Banjo ball valve 2 way 1¼” union
58.68
64.55
Y
ORDER CODE
DESCRIPTION
BJSUV150FP
Banjo ball valve 2 way 1½” union
58.29
64.12
Y
A454232
Valve ball poly ½” 3 way
35.00
38.50
Z
BJSUV200FP
Banjo ball valve 2 way 2” union
74.01
81.41
Y
A454233
Valve ball poly ¾” 3 way
35.00
38.50
Z
A454234
Valve ball poly 1” 3 way
39.00
42.90
Z
A454234H
Valve ball poly 1” 3 way continuous flow
39.56
43.52
Z
A454235
Valve ball poly 1¼”
59.00
64.90
Z
A454235H
Valve ball poly 1¼” continuous flow
62.20
68.42
Z
High Pressure Ball Valves High pressure ball valves, 600 psi, nickel plated brass.
High quality Teflon ball valves with glass reinforced polypropylene housing, Teflon ball and seals, and EPDM gaskets. Female threaded couplings. Range ½”–3” sizes. Banjo 3 way ball valves feature stainless steel bolts precision molded in glass reinforced polypropylene for strength and chemical resistance, with self-aligning ball moving freely against the PTEF seats for smooth operation. Ball is diamond turned, after moulding, to provide precise contact between ball and seats. FKM (Viton type) seats. $ (EX. GST)
$ (INC. PROD. GST) CAT.
ORDER CODE
DESCRIPTION
$ (EX. $ (INC. PROD. GST) GST) CAT.
A454236
Valve ball poly 1½” 3 way
69.00
75.90
Z
B165.1501.4
Valve ball ³∕8” x ½” BSP right
24.75
27.23
Z
A454237
Valve ball poly 2” 3 way
89.11
98.02
Z
B165.1501.5
Valve ball ½” BSP right
24.75
27.23
Z
A453027E99
Manual ball valve, 80mm 3 way, 8 bar
270.60
297.66
Z
B165.1501.6
Valve ball ³∕8” x ½” BSP left
24.75
27.23
Z
BJV100BL
Banjo 3 way 1” bottom load ball valve
78.81
86.69
Y
B165.1501.7
Valve ball ½” BSP left
24.75
27.23
Z
BJV125BL
Banjo 3 way 1¼” bottom load ball valve
101.88
112.07
Y
B176.1501.11
Valve ball ¾”male x ¾” female BSP
49.12
54.03
Z
BJV150BL
Banjo 3 way 1½” bottom load ball valve
101.88
112.07
Y
BALL12F2
Valve ball ½” female 2 way
11.99
13.19
Z
BJV200BL
Banjo 3 way 2” bottom load ball valve
155.46
171.01
Y
Five Way Ball Valves High quality Teflon ball valves with glass reinforced polypropylene housing, Teflon ball and seals, and EPDM gaskets. Female threaded couplings. 1¼” and 2” sizes. ORDER CODE
74
DESCRIPTION
$ (EX. $ (INC. PROD. GST) GST) CAT.
POLVTD31300 Valve ball poly 1¼” 5 way
562.61
618.87
X
POLVTD90600 Valve ball poly 2” 5 way
775.16
852.68
X
www.croplands.com.au
Standard 3-way valves
Continuous flow 3-way valves
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 3
Agitators and tank fittings
Agitators, lids and tank fittings Breather Lid Lid O-ring/seal Strainer Ring A5022042
A5022033
A502163
A502053
A504203
A356060
A354010
Agitators SupaFlow Venturi Agitator
Hydraulic agitator with inspection hole. Can be adapted to various tank shapes. Double venturi circuit to increase efficiency and reduce water consumption. Threaded G ½” connector for simple installation on tank. Suitable for low pressure (nozzles Ø 5 – 7 – 9mm), or high pressure (nozzles Ø 2 – 3mm) operation. Polypropylene body.
Hydraulic Agitator
An efficient agitator can double the agitation of your tank mix. This hydraulic agitator hooks up to the pressure line. Elbow or straight version available.
Supa-Mix Agitator
This efficient, hydraulic agitator takes both high and low pressure return lines, and can turn over the contents of a 3000 litre tank every 3 minutes.
ORDER CODE
DESCRIPTION
A50220312
Agitator 90° #1.2 ceramic
$ (EX. GST) 26.88
$ (INC. GST) PROD. CAT. 29.56
Z
A5022033
Agitator 90° #3 stainless
24.38
26.82
Z
A5022042
Agitator straight #2 ceramic
22.49
24.74
Z
A502163
Agitator SupaFlow type – 3mm stainless steel
61.92
68.11
Z
A502053
Agitator Supa-Mix #2 nozzle
275.06
302.57
Z
tank fittings ORDER CODE
DESCRIPTION
A452107
Valve 2” anti-pollution drain valve
$ (EX. GST) 45.14
$ (INC. GST) PROD. CAT. 49.66
Z
ABP12
Tank outlet ½” poly
11.71
12.88
Z
ABP34
Tank outlet ¾” poly
11.71
12.88
Z
ABP10
Tank outlet 1” poly
11.97
13.17
Z
ABP114
Tank outlet 1¼” poly
11.97
13.17
Z
ABP112
Tank outlet 1½” poly
12.92
14.21
Z
ABP20
Tank outlet 2” poly
19.88
21.86
Z
Tank Lids and Strainers Quality threaded and hinged lids, ring and basket strainer replacements. Upgrade now! Lid Strainer Diameter diameter
Strainer depth
ORDER CODE
DESCRIPTION
A354030
Lid 102mm (across thread) comes with breather and seal
–
–
–
13.01
14.31
A354010
Lid 152mm (across thread) comes with spring breather and O-ring
–
–
–
16.28
17.91
Z
UP-180
Lid for diesel tank (fully assembled)
–
–
–
25.80
28.38
X
A3510221
Lid/ring kit, 255mm (across thread)
–
–
–
29.20
32.12
Z
A300110
Filter basket (small)
203
188
120
29.55
32.51
Z
A300116
Filter basket (small)
203
188
235
38.74
42.61
Z
A3510040
Lid/ring kit, 355mm (across thread)
–
–
–
39.40
43.34
Z
A300330
Filter basket (medium)
305
288
46
26.74
29.41
Z
A300120
Filter basket (medium)
305
288
245
45.29
49.82
Z
A3510060
Lid/ring kit, 455mm (across thread)
–
–
–
49.04
53.94
Z
A300126
Filter basket (large)
400
380
185
50.75
55.83
Z
A300130
Filter basket (large)
400
380
275
54.49
59.94
Z
A300134
Filter basket (large)
400
380
330
71.56
78.72
Z
A3522000
Breather for 355mm and 455mm lid
–
–
–
17.33
19.06
Z
A504203
Breather valve
–
–
–
12.25
13.48
Z
A356060
Hinged lid, 180°, 382mm across thread, comes with ring and breather
–
–
–
72.87
80.16
Z
A356660.020
O-ring for A356060 lid
–
–
–
20.04
22.04
Y
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
Z
75
Section 3
Spraying tools
Tools for Accurate Spraying Croplands have a great range of extremely useful tools for checking or upgrading the performance of your sprayer. We provide advice and equipment to test and maintain your sprayer – to ensure your application is optimised. In the nozzle section to follow, on pages 97 to 100, you will find a full summary of how to successfully calibrate a sprayer in broadacre, and some excellent information for determining your application options in horticulture. Below you will find tools to make calibration and maintenance of your nozzles much, much easier.
Electronic Spray Tip Pressure Tester
Spot-on calibrator
Quick Guide
Quick Guide
»» Can measure pressure in Psi, kPa and Bar
An unbelievably useful and extremely fast way to check nozzle output. No more using inaccurate measuring jugs and stop watches – get a flow rate reading in 10 seconds or less!
»» Accurate to within +/- 1 psi, 0.07 bar or 7kPa »» 5 year battery life* (*depending on how much use)
»» Waterproof design, no moving parts
»» Quick cap connector – easy fit up to the nozzle body
»» Easy one-hand operation, electronic display
»» LCD display shows nozzle pressure and unit of measure
»» Reads in GPM or litres per minute
»» For test gauge use only – not for continuous use
Order code L-H9210
»» Accurate to 0.01 L/min »» Battery life approx 2 years (has battery warning indicator)
»» Reads from 3 to 160 psi (11 Bar) »» Absolutely foolproof Order code L-H9200 (more information on page 100)
Nozzle cleaner and nozzle cap multi tool in a handy pack
WindMate™ hand held weather meter
Quick Guide
Quick Guide
One of the most difficult and frustrating jobs is removing tight caps to clean nozzles, and then cleaning the nozzle without damaging it.
This is one of Croplands’ most successfully selling tools for determining when it is safe to go spraying. Thousands of farmers are now using the Windmate.
This kit has the following features:
»» Eight functions including Temperature, wet bulb temp, wind speed and direction, Dewpoint, relative humidity, Delta T and comfort index. For more information see page 96 in the nozzle section
»» Air-blast nozzle cleaner – simply charge it with air and it will blow out any grit or residue blocking your nozzle »» Multi tool with brush, plastic pick for removing a pre-orifice or residue, spanner wrench to make undoing nozzles so much easier and a utility hook for removing nozzle filters and the like. A must for all farmers Order code L-H9220
76
»» Clear design allows for easy cleaning. Warning: only test your nozzles with water, not with mixed chemicals. Damage to the unit may occur
»» You simply cannot do without a WindMate™ to be sure you are spraying when conditions are right Order code L-H6001
ORDER CODE
DESCRIPTION
L-H9210
Electronic pressure testing gauge
L-H9220
Nozzle cleaner and nozzle multi tool kit
L-H9200 L-H6001
$ (EX. GST)
$ (INC. GST) PROD. CAT.
226.36
249.00
X
80.91
89.00
X
Spot-on nozzle calibrator
271.82
299.00
X
WindMate™ hand held weathermeter
250.00
275.00
X
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
NOZZLE Buyers’ GUIDE January 2014
www.croplands.com.au www.croplands.co.nz
Section 4
78
Spraywise nozzle information����������������������� 79
Selecting the right nozzle����������������������� 84
Low pressure air-induction���������������������� 91
High pressure air-induction���������������������� 91
Extremely coarse NozzLes�������������������������������� 91
Pre-orifice Flat Fan Nozzles������������������������ 92
Conventional nozzles����� 92
Angle spraying nozzles��� 93
Fertiliser nozzles��������������� 93
Spraywise books���������������� 96
Windmate���������������������������� 96
Horticulture nozzLes������ 105
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
Croplands are the Application Experts
Trends in Nozzle Selection
Croplands designed this Spraywise part of the Optima catalogue as an easy to follow reference guide to help select the right nozzle for the job. As a subsidiary of Nufarm Ltd, Croplands shares the vision to supply our customers with the best products available. Being recognised as the application specialist in Australia, Croplands secured the exclusive distribution of ALBUZ and agrotop nozzles which we complement with the TeeJet range. The synergies we share with Nufarm, such as Spraywise, give us an unparalleled understanding of application technology. We can match target, chemical, nozzle and sprayer to recommend the most efficient and efficacious delivery system. Nufarm’s R&D trial program gives us the confidence that our products and recommendations work.
This stewardship program is a Nufarm initiative to deliver best practise spraying and drift management techniques. Over the last 8 years, Spraywise has been instrumental in raising awareness amongst the farming community about important spray application parameters. Spraywise consolidates various tools, research results and training courses into one program to assist farmers better manage their spraying activities. The result is increased operational flexibility without compromising efficacy.
Spraywise continues to educate farmers and contractors so that conditions such as temperature inversion can be identified and considered in their spray decisions.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Coarse – Driven by growing concerns about drift problems, recent years have seen a constant shift away from conventional nozzles to anti drift nozzles. Extensive research programs, such as Spraywise, have demonstrated that the advantages of a FINE spray quality have been largely overrated. Coverage and efficacy can be achieved with coarser spray qualities. Even with coverage sensitive herbicides, increasing the water volume creates better efficacy than reducing the spray quality.
Air-induction – Key selection criteria for the applicator should be to select a nozzle that produces the coarsest spray quality without compromising efficacy. In most cases that will lead to an air-induction design. Those types of nozzles will also increase the operational flexibility because they reduce the spray application’s vulnerability to wind and Delta T.
Ceramic – Nozzles with high quality ceramic orifices are becoming more popular. Long durability makes this material a very cost effective option. The exclusive introduction of ALBUZ nozzles into the Optima range allows Croplands to offer ceramic options now in all nozzle classes, including low pressure air-induction.
Angle – A global trend in broadacre nozzle design is to create 110° flat fan nozzles that produce two fans in various degrees to each other (see page 89). The result is better coverage on the back of targets, very important for fungicide and insecticide applications.
Optima BUYERS’ GUIDE – JANUARY 2014
79
Section 4
Nozzles
Samples of droplets on Spray Quality water sensitive paper Classification
Nozzle type
Application
Extremely coarse – XC
agrotop XC TurboDrop
very coarse VC
TurboDrop®
Desirable quality for most applications
ALBUZ AVI
coarse C medium M fine F
CAU TIO N–
very fine VF
Some soil applied herbicides and some translocated herbicides (use if drift control is paramount over efficacy) Translocated herbicides (large targets) and soil applied herbicides (heavy stubble load)
AIRMIX
Translocated herbicides, soil applied herbicides and some contact herbicides (use with higher water rates)
ALBUZ adi
Contact herbicides, fungicides and insecticides
PRO OF DUCE TeeJet® XR SPR S L AY ARG DR E A IFT MO UN TS
Some fungicides, contact herbicides and insecticides
Droplet size classifications are based on BCPC specification and are in accordance with ASAE Standard S-572.
Spray Quality Systems of nozzle classification (BCPC, ASAE) have been developed around the world to unify and simplify the description of droplet size ranges that different nozzles produce. Accordingly, nozzles can be classified as producing an EXTREMELY COARSE, VERY COARSE, COARSE, MEDIUM, FINE and VERY FINE spray quality. VF
F
M
C
VC
XC
The spray quality a nozzle produces is very important. Generally, FINE spray quality will increase potential for coverage, but the small droplets are very prone to drift and environmental loss (evaporation). On the other hand, COARSE spray quality with larger droplets will greatly reduce drift potential but may compromise coverage, especially on small targets using low
COARSE
80
water volumes. Choosing the coarsest spray quality without compromising efficacy is the trick. Refer to the information provided by the manufacturer of the chemicals being used, e.g. chemical labels or data sheets, or consult the Nufarm Spraywise Boom Spray Application Guide – available from Nufarm or Croplands. The following information will assist you in finding a nozzle suitable for the job. An important point to remember when choosing a spray nozzle is that one nozzle can produce different spray qualities at different pressures. For example, an AirMix 02 will produce a COARSE spray quality at 3 bar, but a MEDIUM spray quality at 5 bar.
FINE
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
3 2
2
1
1
3
2
1
3
3
2
1
2
1
2
1
2
1
2
1
2
1
3
3
3 2
OPTIMAL PRESSURE RANGE
10
1
3
3
3
2
1
1
2
3
3
2
1
2
1
3
3
2
3
7
9
2
6
8
1
10
10
OPTIMAL PRESSURE RANGE
5
4
9
See page 93 F
3
3
2
2
1
2
3
2
7
OPTIMAL PRESSURE RANGE
10
1
6
9
1
2
1
3
5
8
10
2
10
4
9
10
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
OPTIMAL PRESSURE RANGE
See page 93
fertiliser
8
9
1
9
OPTIMAL PRESSURE RANGE
extremely coarse
8
OPTIMAL PRESSURE RANGE
10
high pressure
9
10
OPTIMAL PRESSURE RANGE
low pressure
8
9
OPTIMAL PRESSURE RANGE
3
pre-orifice
8
3
conventional
Spraying in Angles These nozzles produce a forward and backwards oriented flat fan. The backward oriented fan optimises 5 6 7 the coverage on the back side of target plants. Ideal 4 for fungicides and insecticides in erected crops such as cereal. Nozzles include conventional designs to high pressure air-induction nozzles. 8
Nozzles for EXTREMELY COARSE Spray Quality 6 5 6 7 7 4 In some instances avoiding drift4 is5 paramount. The amount of driftable fines must be greatly reduced or almost eliminated. Few nozzles are designed for this purpose. They will produce great efficacy with translocated products (e.g. 2,4-D or glyphosate) on large targets. In these situations these nozzles can be used with confidence. On smaller targets, especially 5 6 7 5 6 7 4 4 with low water volumes, efficacy is still questionable and current advice remains to use only if drift control is paramount over efficacy.
C
1
2
XC
M
3
3
2
1
3
2
1
1 2
OPTIMAL PRESSURE RANGE
10
1
See page 91
7
9
10
10
OPTIMAL PRESSURE RANGE
6
3
4
5
8
3
fertiliser
7
9
2
9
fertiliser
See page 91
7
8
6
8
9
1
8
10
6
10
5
9
9
4
8
IMAL SSURE NGE
7
10
8
10
10
9
9
OPTIMAL PRESSURE RANGE
extremely coarse
6
9
low pressure
OPTIMAL PRESSURE RANGE
essure
8
8
OPTIMAL PRESSURE RANGE
8
8
IMAL SURE NGE
4
5
High Pressure Air-Induction Nozzles High pressure air-induction nozzles work best in the range of 4–8 bar and must be operated above 3 bar. Compared to low-pressure air-induction nozzles they decrease the amount of driftable fines even further to 90–95%. At speeds of 25 km/h and above they provide more flexibility in retaining a constant spray quality at varying speeds. The orifice material is generally made out of steel or even more durable ceramic.
10
10 7
10
Low Pressure Air-Induction Nozzles 5 6 7 Low 4pressure air-induction nozzles are the most popular nozzle type in Australia. They achieve a 80–90% drift reduction while operating best between only 3–5 bar. Generally they produce a COARSE spray quality but with higher pressures a MEDIUM spray quality can also be achieved. That makes them excellent all rounder 5 6 7 5 6 7 4 nozzles. Until recently4 this type of nozzle was only produced in poly material. However, the ALBUZ CVI opens up the option to upgrade to durable pink ceramic in this class. pre-orifice
6
OPTIMAL PRESSURE RANGE
VC
9
9
ntional
OPTIMAL PRESSURE RANGE
7
OPTIMAL PRESSURE RANGE
8
8
IMAL SSURE NGE
9
10
10
9
9
OPTIMAL PRESSURE RANGE
4
low pressure
extremely coarse
6
5
10
8
See page 91
7
fertiliser
7
9
pre-orifice
high pressure
6
8
8
6
OPTIMAL PRESSURE RANGE
conventional
C coarse
8
OPTIMAL PRESSURE RANGE
10
10
OPTIMAL PRESSURE RANGE
fertiliser
9
9
10
OPTIMAL PRESSURE RANGE
extremely coarse
low pressure
IMAL SURE NGE
OPTIMAL PRESSURE RANGE
Pre-Orifice Flat Fan Nozzles 5 6 7 to conventional 5 6 7nozzles, pre-orifice nozzles Compared 4 4 move the spray quality generally from a FINE to a MEDIUM spectrum and reduce the amount of driftable fines by 50%. Instead of a single orifice they have an entry and an exit orifice. Cleaning of the internal 5 6 7 5 6 7 5 6 7 4 4 4 chamber can be a problem. Pressure requirements are 2–4 bar. While they are a better option than conventional nozzles, they still produce a lot of driftable fines, especially when used at higher pressures. 8
8
9
10
10
9
9
OPTIMAL PRESSURE RANGE
high pressure
8
8
8
1
fertiliser
OPTIMAL PRESSURE RANGE
4
10
extremely coarse
OPTIMAL PRESSURE RANGE
5
9
high pressure
7
See page 92
7
M
Conventional Nozzles 5 6 7 5 6 the 5 6cheapest 5 6 7 Conventional nozzles 4are simplest and 7 7 4 4 4 nozzle design with a single orifice only. They produce a FINE spray quality. The main advantage of conventional nozzles is their low pressure requirement (1.5–3 bar) and their proven performance with insecticides and fungicides. However, they are also the main producers of driftable fines and should be avoided.
6
6
5
8
OPTIMAL PRESSURE RANGE
F
ifice
4
10
2
7
9
2
low pressure
6
5
8
10
OPTIMAL PRESSURE RANGE
4
9
OPTIMAL PRESSURE RANGE
10
1
7
8
2
4
6
9
1
7
5
8
10
10
9
9
OPTIMAL PRESSURE RANGE
pre-orifice
See page 92 6
5
4
8
8 OPTIMAL PRESSURE RANGE
7
3
4
1
7
conventional
low pressure
6
5
3
pre-orifice
3
4
6
3
conventional
5
Fertiliser Nozzles Fertiliser nozzles produce solid streams and are used with liquid fertilisers.
Optima BUYERS’ GUIDE – JANUARY 2014
81
Section 4
Nozzles
Nozzle Names Names of nozzles start generally with the name of the manufacturer, for example agrotop. The first letters in a nozzle name refer to a specific type of nozzle. For example TDAM represents TurboDrop AirMix. The specific nozzle type code is followed by the spray angle that a nozzle produces. In most cases this would be 110 for a 110º angle but there are also, for example, 65, 80 or OC-codes (i.e. off-centre). The next code number represents the standard size of the nozzle. The size is determined by the spray volume that a nozzle puts out at 2.8 bar. For example, a XR TeeJet nozzle 02 size means that the nozzle puts out 0.2 gallons/min (= flow rate of 0.75 L/min). A 04 sized nozzle has a flow rate of 0.4 gallons/min. Different type nozzles of the same size may produce completely different spray qualities but they will have the same flow rate per minute.
Nozzle name: agrotop TDAM-110-03 agrotop = manufacturer TDAM = AirMix® 110 = 110° spray angle 03 = size (0.3 gallons/min at 2.8 bar)
Any letters behind the size-code indicate that different versions of the nozzle are available with different orifice materials. For example, VK stands for ceramic, VS for steel, VP for polymer.
Colour Coding Flat fan nozzles of the same size are colour coded to simplify recognition. For example, regardless of type, every yellow flat fan nozzle is a size 02. For assembled air-induction nozzles such as the TurboDrop the size is determined by the pre-orifice containing injector part, not the output-orifice containing nozzle cap.
Colour Coding of Flat Fan Nozzles
This colour coding also applies to angled, twin or offcentre flat fan nozzles as well as some liquid fertiliser nozzles. However, it does not apply to cone (except ALBUZ TVI and TeeJet TXB80) and FloodJet nozzles.
Croplands installs air-induction nozzles as standard
82
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
Nozzle Material and Wear Nozzle orifices are produced with different materials, the most durable of them being ceramic, followed by steel and various polymers. Nozzles with brass orifices are made from the least durable material. Worn or damaged nozzles will produce an uneven spray pattern with serious implications for efficacy. Worn or damaged nozzles in spray units without an automatic rate controller will increase the output, spoil calibration, and may create unnecessary extra costs due to over application. Most new sprayers have rate controllers that will compensate by measuring liquid flow and adjust accordingly. However, they will cause undersupply to
the rest of the nozzles to adjust for the extra output of the worn nozzles. Again, this may result in an uneven spray pattern. Nozzles should be checked for wear at least once per season. As a rule of thumb, nozzles made from durable plastic will need replacement every two years, nozzles with steel orifices should be replaced every three years and nozzles with ceramic tips should be replaced every four to five years. These timeframes will decrease with heavy use, especially when spraying abrasive chemicals.
EFFECT OF NOZZLE MATERIAL ON NOZZLE WEAR: ACCELERATED WEAR TEST
% Change In Flow Rate
70
TP1100
60
4 Brass
50
XR1100
4VP (Polymer)
40
XR1100
30
4VS (Steel)
20
XR1100
10
4VK (Ceramic)
0 -10 0
20
40
60
80 100 120 140 160 180 200 Time (min)
Source: TeeJet
UNIFORMITY OF SPRAY Uniformity of spray is affected by: »» Worn or damaged nozzles
»» Nozzle type, spacing and height »» Boom movement, stability
»» Liquid properties (adjuvants can have an uniforming effect, e.g. LI 700)
NEW SPRAY TIPS Produce a uniform distribution when properly overlapped.
WORN SPRAY TIPS Have a higher output with more spray concentrated under each tip.
DAMAGED SPRAY TIPS Have a very erratic output – over applying and under applying. Source: TeeJet
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
83
Section 4
Nozzles
Bar Bar 2 Bar 2
Flowrate Flowrate 0.33 Flowrate 0.33
6 km/h 6 km/h 66 6 km/h 66
broadcast broadcast and and turf turf applications applications L/ha spacing Broadcast andnozzle turf applications L/ha 50cm 50cm nozzle spacing 8 km/h 10 km/h 12 km/h 14 km/h 1550cm km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 28 km/h 30 km/h L/ha nozzle spacing 8 km/h 10 km/h 12 km/h 14 km/h 15 km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 28 km/h 30 km/h 49 8 km/h 1039 km/h 1233 km/h 1428 km/h 1526 km/h 1625 km/h 1723 km/h 1822 km/h 2020 km/h 2218 km/h 2416 km/h 2516 km/h 2615 km/h 2814 km/h 3013 km/h 26 25 23 22 20 18 16 16 15 14 13
49 39 33 28 3 0.4 the 80 60 48 nozzle 40 34 How to select right 2 0.33 66 49 39 33 28 3 0.4 80 60 48 40 34
Example optimum fit: ALBUZ AVI 02 around 7 bar ALBUZ AVI 110
84
Bar 5
6
AVI 11001
C
C
AVI 110015
C
C
AVI 11002
C
C
AVI 110025
C
C
r nozzle sizes are not related to colour coding FOR spray qualities
NOTE: Colour coding for nozzle sizes NOTE: NOTE: NOTE: are Colour Colour not Colour related coding coding coding to for colour for for nozzle nozzle nozzle coding sizes sizes sizes are FOR are are not spray not not related related qualities related toto colour tocolour colour coding coding coding FOR FOR FOR spray spray spray qualities qualities qualities
32 30 28 27 24 22 20 19 18 17 16 26 25 23 22 20 18 16 16 15 14 13 32 30 28 27 24 22 20 19 18 17 16 4 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 3 0.4 80 60 48 40 34 32 30 28 27 24 22 20 19 18 17 16 4 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 5 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 01 1. Select Size Options 01 the66554Nozzle 0.57 114 85 68 57 49 45 43 40 38 34 31 28 27 26 25 23 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 0.57 114 85 68 57 49 45 43 40 38 34 31 28 27 26 25 23 Orange 01 7 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 26 24 Orange Example: wants to spray rate 80 L/ha. 6 A farmer 0.57 114 85 68 at a 57 drive 49speed 45 of 18 43 km/h, 40 with 38 a spray 34 31 of31 28 27 26 25 23 7 0.61 122 92 73 61 52 49 46 43 41 37 33 29 28 26 24 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 Orange 887 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 26 24 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 9 Find0.69 138km/h 104column 83 on 69page 5986 and 55 follow 52 42 80 38 33 closest 32 30 28 What to do: the 18 it49 down46 L/ha –35 8 0.65 130 98 78 65 56 52 49 46 43to find 39 35 33or the 31 30 28 26 9 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 10 0.73 146 110 88 73 63 59 55 52 49 44 40 37 35 34 32 29 9 value(s) 0.69 to146 138 104 Now 83 69 59 along 55 the 52row 52 49 46the appropriate 42 38 35 33 32of nozzle 30 28 10 0.73 110 88 73 63 59 55 49 44 40 37 35 34 32 29 80 L/ha. follow left to find combination 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 10 0.73 146 110 88 73 63 59 55 52 49 44 40 37 35 34 32 29 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 3 and pressure. 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 26 24 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 3 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 26 24 4 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 3 0.6 120 90 72 60 51 48bar. 52 45 42blue46 40 36 33 30 29 28 26 24 4 0.69 138 104 83 69 59 55 49 42 38 35 33 32 30 28 Result: Yellow at 7 116 bar. Or at 4.562 Or 0355 at 3 bar. 5 02 0.78 156 93 02578Lilac 66 58 52 47 42 39 37 36 33 31 4 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 5 0.78 156 116 93 78 66 62 58 55 52 47 42 39 37 36 33 31 015 015 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 5 0.78 156 116 93 78 66 62 58 55 52 47 42 39 37 36 33 31 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 Green 015 7 0.92 184 138 110 92 79 73 and 69 turf 65 applications 61 55 50 46 44 42 40 37 broadcast Green 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 7 0.92 184 138 110 92 79 73 69 65 61 55 50 46 44 42 40 37 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 Green L/ha 50cm nozzle spacing 7 0.92 184 138 110 92 79 73 69 65 61 55 50 46 44 42 40 37 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 45 42 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 9 1.04 Bar Flowrate 6208 km/h 8156 km/h 10125 km/h 12104 km/h 1489 km/h 1583 km/h 1678 km/h 1774 km/h 18 69 km/h 2063 km/h 2257 km/h 2452 km/h 2550 km/h 2648 km/h 2845 km/h 3042 km/h 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 45 42 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 2 0.33 66 49 39 33 28 26 25 23 22 20 18 16 16 15 14 13 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 3 0.4 80 60 48 40 34 32 30 28 27 24 22 20 19 18 17 16 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 4 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 5 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 01 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 6 0.57 114 85 68 57 49 45 43 40 38 34 31 28 27 26 25 23 02 02 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 Orange 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 7 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 26 24 Yellow 02 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 Yellow 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 8 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 Yellow 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 9 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 10 0.73 146 110 88 73 63 59 55 52 49 44 40 37 35 34 32 29 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 3 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 26 24 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 4 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 5 0.78 156 116 93 78 66 62 58 55 52 47 42 39 37 36 33 31 5 1.29 258 194 155 129 111 103 97 91 86 78 70 65 62 60 56 52 015 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 5 1.29 258 194 155 129 111 103 97 91 86 78 70 65 62 60 56 52 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 025 025 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 Green 5 1.29 258 194 155 129 111 103 97 91 86 78 70 65 62 60 56 52 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 7 0.92 184 138 110 92 79 73 69 65 61 55 50 46 44 42 40 37 Lilac 025 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 Lilac 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 Lilac 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 45 42 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 2 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 2 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 3 1.2 240 180 144 120 103 96 90 85 80 72 65 60 58 55 52 48 2 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 3 1.2 240 180 144 120 103 96 90 85 80 72 65 60 58 55 52 48 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 03 3 1.2 240 180 144 120 103 96 90 85 80 72 65 60 58 55 52 48 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 5 1.55 310 232 186 155 133 124 116 109 103 93 85 77 74 72 67 62 02 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 5 1.55 310 232 186 155 133 124 116 109 103 93 85 77 74 72 67 62 Blue 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 03 6 1.7 340 255 204 170 145 136 128 120 113 102 93 85 82 78 73 68 Yellow 5 1.55 310 232 186 155 133 124 116 109 103 93 85 77 74 72 67 62 6 1.7 340 255 204 170 145 136 128 120 113 102 93 85 82 78 73 68 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 03 7 1.83 366 275 220 183 157 147 138 129 122 110 100 92 88 85 79 73 Blue 6 1.7 340 255 204 170 145 136 128 120 113 102 93 85 82 78 73 68 7 1.83 366 275 220 183 157 147 138 129 122 110 100 92 88 85 79 73 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 8 1.96 392 294 235 196 168 157 147 138 131 118 107 98 94 90 84 78 Blue 7 1.83 366 275 220 183 157 147 138 129 122 110 100 92 88 85 79 73 8 1.96 392 294 235 196 168 157 147 138 131 118 107 98 94 90 84 78 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 9 2.08 416 312 249 208 178 166 156 146 139 125 113 104 100 96 89 83 8 1.96 392 294 235 196 168 157 147 138 131 118 107 98 94 90 84 78 9 2.08 416 312 249 208 178 166 156 146 139 125 113 104 100 96 89 83 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 10 2.19 438 329 263 219 188 175 165 155 146 132 120 110 105 101 94 88 2. Select Spray Quality 9 2.08 416 312 249 208 178 166 156 146 139 125 113 104 100 96 89 83 10 2.19 438 329 263 219 188 175 165 155 146 132 120 110 105 101 94 88 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 2 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 10 2.19 438 329 263 219 188 175 165 155 146 132 120 110 105 101 94 88 2 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 3 1.6 320 240 192 160 137 128 120 113 107 96 87 80 77 74 69 64 2 1.31 262 196 157 131 112 105 98 92 87coding 79 for 71 spray 65 qualities 63 60are not 56 52 Note: Colour 3 1.6 320 240 192 160 137 128 120 113 107 96 87 80 77 74 69 64 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 1.85 370 277 222 VC 185 158 148 139 131 123 111 101 92 89 85 79 74 VF F 5443 M 258 C XC 103 coding 1.6 320 240 192 160 137 128 related 120 113 107 96 87 for 80nozzle 77 sizes. 74 69 64 1.85 370 277 222 185 158 148 139 131 123 111 101 92 89 85 79 74 1.29 194 155 129 111 97 91to colour 86 78 70 65 62 60 56 52 5 2.07 414 310 248 207 177 165 155 146 138 124 113 103 99 95 89 83 025 4 1.85 370 277 222 185 158 148 139 131 123 111 101 92 89 85 79 74 5 2.07 414 310 248 207 177 165 155 146 138 124 113 103 99 95 89 83 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 04 04 6 2.26 452 339 272 226 194 181 170 160 151 136 124 113 109 105 97 91 Lilac 5 2.07 414 310 248 207 177 165 155 146 138 124 113 103 99 95 89 83 6 2.26 452 339 272 226 194 181 170 160 151 136 124 113 109 105 97 91 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 Red 04 7 2.44 488 367 293 244 209 195 184 172 163 147 133 122 117 113 105 98 Example: The farmer wants to use Weedmaster DST. Red 6 2.26 452 339 272 226 194 181 170 160 151 136 124 113 109 105 97 91 7 2.44 488 367 293 244 209 195 184 172 163 147 133 122 117 113 105 98 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 8 2.61 522 392 313 261 224 209 196 184 174 157 142 131 125 120 112 104 7 2.44 488 367 293 244 209 195 184 172 163 147 133 122 117 113 105 98 8 2.61 522 392 313 261 224 209 196 184 174 157 142 131 125 120 112 104 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 What Red to do : is222 given208 on the advisory e.g. 119 Nufarm 9 Information 2.77 554on required 416 333 spray 277 quality 238 196 label 185or other 167 151 139 literature, 133 128 111 8 2.61 522 392 313 261 224 209 196 184 174 157 142 131 125 120 112 104 9 2.77 554 416 333 277 238 222 208 196 185 167 151 139 133 128 119 111 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 10Boomspray 2.92 584Application 438 351 Guide, 292 or 250 234follow 219 the 206 195 176 160page. 146 140 135 125 117 on opposite 9 2.77 554 416 333 277 238 222 208 196 185 167 151 139 133 128 119 111 10 2.92 584 438 351 292 250 234 219 206 195 176 160 146 140 135 125 117 2 0.98 196 147 118 98 84simply 79 74 69chart 65 59 54 49 47 45 42 39 10 438 351 292 250 219 206 176 160 146 140 135 125 117 3 1.2 240 180 144 120 103 96 90 85 80 broadcast 72 65 and 60 turf 58 applications 55 52 48 Result: The2.92 table 584 opposite page advises to use234 a COARSE spray195 quality. L/ha 50cm nozzle spacing 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 Bar Flowrate 6 km/h 8 km/h 10 km/h 12 km/h 14 km/h 15 km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 5 1.55 310 232 186 155 133 2 1240.33 11666 109 103 3393 28 85 26 7725 74 72 20 67 18 6216 49 39 23 22 16 15 03 6 1.7 340 255 204 170 145 3 136 0.4 12880 120 113 8530 82 60 48 40102 34 93 32 28 2778 24 73 22 6820 19 18 Blue Nozzle 69 55 46110 40 10037 32 3185 28 79 25 7323 22 21 7 1.83 122 9235 88 3. Select Type366 275 220 183 157 4 1470.46 13892 129 104 138 78 62 36 3590 31 84 28 7826 25 24 8 1.96 294 235 196 01 168 5 1570.52 147 131 52118 44 10741 9839 94 What to do: Match the392 chosen nozzle size and pressure (step with 68 the chosen spray quality by89 31 8328 27 26 114 1) 85 43 40 (step 38 2) 34 9 2.08 416 312 249 208 178 6 1660.57 156 146 139 57125 49 11345 104 100 96 Orange 7 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 the different page 89 and page 10comparing 2.19 438 329 263 nozzle 219 types 188 8on 175 146 90. 105 101 39 94 35 8833 0.65 165 130 155 98 78 65132 56 12052 110 49 46 43 31 30 2 1.31 262 196 157 131 112 9 1050.69 98138 92 87 6552 63 104 83 6979 59 71 55 49 4660 42 56 38 5235 33 32 Result: Optimum fit: ALBUZ AVI 02 around 7 bar, agrotop TurboDrop 02 around 7 bar, 146 113 110 88 52 4974 44 69 40 6437 35 34 3 1.6 320 240 192 160 137 10 1280.73 120 107 7396 63 87 59 8055 77 74 59 35 3385 30 79 27 7425 24 23 4 1.85 370 277 222CVI185 158 2 148 13998 131 123 49111 42 10139 9237 89 ALBUZ 03 around 3 0.49 bar. 3 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 5 2.07 414 310 248 207 177 4 1650.69 155 146 138 124 113 103 99 95 89 83 138 104 83 69 59 55 52 49 46 42 38 35 33 32 04 Possible agrotop 03 bar, agrotop AirMix 025 at124 4.5 bar, ALBUZ CVI 6 2.26 fit: 452 339 272 AirMix 226 194 at 3 181 151 78 136 66 109 105 025 0.78 170 156 160 116 93 62 113 58 55 52 47 97 42 9139 37 36 015209 65 1950.85 Red 7 2.44 488 367 293 244 184 172 163 147 133 122 117 113 105 98 170 127 102 85 73 68 64 60 57 51 46 42 41 39 at 4.5 bar (these selections do not allow much of a pressure change without Green 184 184 138 110 69 65 61 44 42 8 2.61 522 392 313 261 224 7 2090.92 196 174 92157 79 14273 131 125 120 55112 50 10446 changing the spray 8 196 147 118 74 69 65 47 45 9 2.77 554 416 333 277 238 quality). 2220.98 208 196 185 98167 84 15179 139 133 128 59119 54 11149 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 10 2.92 584 438 351 292 250 10 234 1.1 219 195 110 176 94 16087 146 140 135 66125 60 11755 220 206 164 131 82 77 73 52 50 2 3 4 5 02 6 Yellow 7 7 8 8 C C 9 from Step 1. 10 C C 2 C C 3 C C 4 5 025 6 Lilac 7 8 9 www.croplands.com.au 10 2 3
0.65 0.8 0.92 1.03 1.13 1.22 1.31 1.39 1.46 0.82 1.0 1.15 1.29 1.41 1.53 1.63 1.73 1.83 0.98 1.2
130 160 184 206 226 244 262 278 292 164 200 230 258 282 306 326 346 366 196 240
Example possible fit: ALBUZ CVI 025 at 4.5 bar
98 78 65 56 52 49 46 43 39 35 33 120 96 80 69 64 60 56 53 48 44 40 139 111 92 79 74 70 65 61 56 50 46 155 124 103 89 83 78 73 69 62 56 52 170 136 113 97 91 85 80 Bar 75 68 62 57 183 147 122 105 982.5 92 3 86 3.5 81 4 74 4.567 2 5 61 196CVI 110015 157 131 112 105C 98 C 92 C 87 C 79 71 65 C C C 208 166 139 119 111 104 98 93 83 75 69 C M 219CVI 11002 175 146 125C 117C 110 C 103 C 97 C 88 80 73 C 45 M41 122CVI 110025 98 82 70C 65 C 61 C 58 C 55 C 49 150CVI 11003 120 100 86C 80 C 75 C 71 C 67 C 60 C 55 M50 173 138 115 99 92 87 81 77 69 63 58 194 155 129 111 103 97 91 86 78 70 65 212 170 141 121 113 106 100 94 85 77 71 229 183 153 131 122 115 108 102 92 83 76 245 196 163 140 131 123 115 109 98 89 82 Photos208 are for illustrative purposes only. Prices specifications subject 95 to change 260 173 148 139 130 and122 115 are 104 87 without notice. 183 Prices effective January freight prices, page 111. 274 219 157 146 2014. 137 For indicative 129 122 110 see 100 91 147 118 98 84 79 74 69 65 59 54 49 180 144 120 103 96 90 85 80 72 65 60
31 38 44 50 54 59 63 66 70 39 48 55 62 68 73 78 83 88 47 58
30 37 43 48 52 57 60 64 67 38 46 53 60 65 70 75 80 84 45 55
Nozzles Section 4
VERY COARSE
EXTREMELY COARSE
Group
Chemistry
Products
FINE
MEDIUM
COARSE
ADJUVANTS
A
Fops and Dims
Sequence, Factor
3
33
33
Bonza, Supercharge
Imidazolinones
Intervix, Onduty
3
33
33
Bonza, Supercharge
Sulfonyl Ureas
Associate
3
33
Triazines
Nu-trazine 900DF, Diuron 900DF, Diurex
Benzonitriles
Bromicide 200
D
Dinitroanilines
Triflur X, Rifle 440, Stomp 440
F
Phenoxynicotinanilides
Paragon, Sniper, Nugrex, T-Rex
G
Diphenyl esthers Triazolinones
Striker, Unity, Nail 240
Benzoic Acids
Kamba 500
33
Phenoxy acetic Acids
Amicide Advance, 2,4-D amine and ester, MCPA
33
Pyradines
Archer, Transit
J
Thiocarbamates
Avadex Xtra, Approve
K
Chloroacetamides
Bouncer, Outlook
L
Bipyridyls
Revolver, Nuquat 250, Shirquat
3
33
M
Glyphosate
Weedmaster DST, Gladiator
3
33
Q
Triazoles
Amitrole, Alliance
33
33
Z
Arylaminopropionic acids
Mataven 90
33
B LI 700, Activator
33
33
33
33
Activator
C
I
3
33
3
33
33
33
33
33
33
Activator
33
3 33
3
Activator
LI 700
33
Activator
33
LI 700,
Bonza, Supercharge
Key: 3 = fine targets 33 = use 90–100 L/ha 33= stubble 33= summer
Other Spraywise Spray Qualities Chemistry
FINE
MEDIUM
COARSE
Insecticides
3
33
33
Fungicides
3
33
33
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
VERY COARSE
EXTREMELY COARSE
Optima BUYERS’ GUIDE – JANUARY 2014
85
Section 4
Nozzles
NOTE: Colour coding for nozzle sizes are not related to colour coding FOR spray qualities
Broadcast and turf applications L/ha 50cm nozzle spacing
01 Orange
015 Green
02 Yellow
025 Lilac
03 Blue
04 Red
Bar
Flowrate
6 km/h
2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10
0.33 0.4 0.46 0.52 0.57 0.61 0.65 0.69 0.73 0.49 0.6 0.69 0.78 0.85 0.92 0.98 1.04 1.1 0.65 0.8 0.92 1.03 1.13 1.22 1.31 1.39 1.46 0.82 1.0 1.15 1.29 1.41 1.53 1.63 1.73 1.83 0.98 1.2 1.39 1.55 1.7 1.83 1.96 2.08 2.19 1.31 1.6 1.85 2.07 2.26 2.44 2.61 2.77 2.92
66 80 92 104 114 122 130 138 146 98 120 138 156 170 184 196 208 220 130 160 184 206 226 244 262 278 292 164 200 230 258 282 306 326 346 366 196 240 278 310 340 366 392 416 438 262 320 370 414 452 488 522 554 584
8 km/h 10 km/h 12 km/h 14 km/h 15 km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 28 km/h 30 km/h 49 60 69 78 85 92 98 104 110 74 90 104 116 127 138 147 156 164 98 120 139 155 170 183 196 208 219 122 150 173 194 212 229 245 260 274 147 180 208 232 255 275 294 312 329 196 240 277 310 339 367 392 416 438
39 48 55 62 68 73 78 83 88 59 72 83 93 102 110 118 125 131 78 96 111 124 136 147 157 166 175 98 120 138 155 170 183 196 208 219 118 144 166 186 204 220 235 249 263 157 192 222 248 272 293 313 333 351
33 40 46 52 57 61 65 69 73 49 60 69 78 85 92 98 104 110 65 80 92 103 113 122 131 139 146 82 100 115 129 141 153 163 173 183 98 120 139 155 170 183 196 208 219 131 160 185 207 226 244 261 277 292
28 34 40 44 49 52 56 59 63 42 51 59 66 73 79 84 89 94 56 69 79 89 97 105 112 119 125 70 86 99 111 121 131 140 148 157 84 103 119 133 145 157 168 178 188 112 137 158 177 194 209 224 238 250
26 32 37 41 45 49 52 55 59 39 48 55 62 68 73 79 83 87 52 64 74 83 91 98 105 111 117 65 80 92 103 113 122 131 139 146 79 96 111 124 136 147 157 166 175 105 128 148 165 181 195 209 222 234
25 30 35 39 43 46 49 52 55 37 45 52 58 64 69 74 78 82 49 60 70 78 85 92 98 104 110 61 75 87 97 106 115 123 130 137 74 90 104 116 128 138 147 156 165 98 120 139 155 170 184 196 208 219
23 28 32 36 40 43 46 49 52 35 42 49 55 60 65 69 74 77 46 56 65 73 80 86 92 98 103 58 71 81 91 100 108 115 122 129 69 85 98 109 120 129 138 146 155 92 113 131 146 160 172 184 196 206
22 27 31 35 38 41 43 46 49 33 40 46 52 57 61 65 69 73 43 53 61 69 75 81 87 93 97 55 67 77 86 94 102 109 115 122 65 80 93 103 113 122 131 139 146 87 107 123 138 151 163 174 185 195
20 24 28 31 34 37 39 42 44 30 36 42 47 51 55 59 63 66 39 48 56 62 68 74 79 83 88 49 60 69 78 85 92 98 104 110 59 72 83 93 102 110 118 125 132 79 96 111 124 136 147 157 167 176
18 22 25 28 31 33 35 38 40 27 33 38 42 46 50 54 57 60 35 44 50 56 62 67 71 75 80 45 55 63 70 77 83 89 95 100 54 65 75 85 93 100 107 113 120 71 87 101 113 124 133 142 151 160
16 20 23 26 28 31 33 35 37 25 30 35 39 42 46 49 52 55 33 40 46 52 57 61 65 69 73 41 50 58 65 71 76 82 87 91 49 60 69 77 85 92 98 104 110 65 80 92 103 113 122 131 139 146
16 19 22 25 27 29 31 33 35 24 29 33 37 41 44 47 50 52 31 38 44 50 54 59 63 66 70 39 48 55 62 68 73 78 83 88 47 58 66 74 82 88 94 100 105 63 77 89 99 109 117 125 133 140
15 18 21 24 26 28 30 32 34 23 28 32 36 39 42 45 48 50 30 37 43 48 52 57 60 64 67 38 46 53 60 65 70 75 80 84 45 55 64 72 78 85 90 96 101 60 74 85 95 105 113 120 128 135
14 17 20 22 25 26 28 30 32 21 26 30 33 37 40 42 45 47 28 35 40 45 49 53 56 60 63 35 43 50 56 61 66 70 74 79 42 52 60 67 73 79 84 89 94 56 69 79 89 97 105 112 119 125
13 16 18 21 23 24 26 28 29 20 24 28 31 34 37 39 42 44 26 32 37 41 45 49 52 55 58 33 40 46 52 57 61 65 69 73 39 48 55 62 68 73 78 83 88 52 64 74 83 91 98 104 111 117
Nozzle spacing
25 cm spacing
30 cm spacing
35 cm spacing
40 cm spacing
45 cm spacing
Conversion factor
2
1.66
1.43
1.25
1.11
This 50 cm nozzle spacing table above can still be used for booms with different nozzle spacing by using the above conversion factors. For example, if pressure and speed are given, the L/ha value for 30 cm spacing can be calculated by multiplying the given L/ha table value by 1.66. And the other way around. For example, a grower wants to use 80 L/ha. His boom nozzle spacing is 30 cm. To use this table he needs to divide 80 L/ha by the 30 cm conversion factor (= 1.66). 80 L/ha ÷ 1.66 = 48.2 L/ha = a 48.2 L/ha value in this 50 cm spacing table reflects a 80 L/ha value for 30 cm spacing.
Flow Rate L/min/nozzle=
Travel Speed L/ha x km/h x W(m) 600
For example, a farmer wants to spray 70 L/ha, drive with a speed of 18 km/h and his boom has a nozzle spacing of 50 cm: L/min =
70 L/ha x 18 km/h x 0.5m
= 1.05 L/min 600 To do so he needs to us a nozzle that delivers 1.05 L/min. He has several options, for example, he could use an 025 nozzle size at 3.5 bar or an 02 size at 5.5 bar (see table). L/min/nozzle = nozzle flow rate in litre per minute L/ha = water application rate per hectare km/h = driving speed W = width of nozzle spacing in metres 600 = constant
86
Speed (km/h) =
Distance (m) x 3.6 Time (sec)
For accurate application it is important to calibrate the speed of the tractor. An easy way to do so is to drive in the gear the application will be done in, measure the time it takes to travel 100 metre and apply this simple formula. For example, it takes the farmer 20 sec to drive 100 metre. His application speed is 18km/h. Speed (km/h) =
100m x 3.6 20 sec
Application Rate Application rate (L/ha) =
www.croplands.com.au
= 18 km/h
L/min/nozzle x 600
Pressure
Spot/Band Spraying
1 bar (bar) = » 100 kilopascal (kPa) » 14.5 pounds per square inch (PSI) 1 pound per square inch (PSI) = » 6.89 kilopascal (kPa) » 0.0689 bar (bar) As a rule of thumb, to double the flow through a nozzle, the pressure must be increased four times. Higher pressures increase drift (less so for AI nozzles) and increase the rate of orifice wear.
For spot and band spraying, the same formula can be used but W (nozzle spacing) becomes the spray width divided by the number of directed nozzles. For example, a grower directs 3 nozzles over a 1 metre strip: W=
1m 3 nozzles
= 0.33 m
km/h x W
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
high pressure air-induction
low pressure air-induction
low drift
CONVENTIONAL
VF
F
M
C
VC
XC
Note: Colour coding for spray qualities are not related to colour coding for nozzle sizes.
CERAMIC
STANDARD AGROTOP TIPCAP TCP 11001 TCP 110015 TCP 11002 TCP 110025 TCP 11003 TCP 11004
Turbo TeeJet tt 11001 tt 110015 tt 11002 tt 110025 tt 11003 tt 11004
3x as durable
Bar 1.5 VF F F F F F
2 VF VF F F F F
2.5 VF VF F F F F
3 VF VF F F F F
3.5 VF VF F F F F
4 VF VF F F F F
Bar 1.5 m C C C C C
2 m m C C C C
2.5 m m m C C C
3 F m m m C C
3.5 F m m m m C
4 F m m m m C
4.5 F F m m m m
5 F F m m m m
5 F C m m C m
5.5 F C m m C m
ALBUZ AXI 110 AXI 110015 AXI 11002 AXI 110025 AXI 11003 AXI 11004
ALBUZ ADI 110 ADI 11001 ADI 110015 ADI 11002 ADI 110025 ADI 11003 ADI 11004
2 F F m m m
2 m m m m C VC
2.5 m m m m m C
2.5 F F m m m
3 F F m m m
4 F F F m m
3.5 F m m m m C
4 F m m m m C
Bar 3 m m m m m C
Nufarm data supported by agrotop. This information supersedes data on previous versions distributed; Data for AM11004 – agrotop AGROTOP AIRMIX FLAT FAN AM 11001 AM 110015 AM 11002 AM 110025 AM 11003 AM 11004
agrotop turbodrop TD TD 110 015 TD 110 02 TD 110 025 TD 110 03 TD 110 04
Bar 2 m xc C vc vc vc
2.5 m vc C C vc vc
3 m C C C C C
3.5 m C C C C C
4 F C m C C C
4.5 F C m C C m
Bar 4 C C vc vc vc
4.5 C C vc C vc
5 C C vc C vc
5.5 C C vc C vc
6 C C vc C vc
6.5 C C vc C vc
7 C C vc C C
7.5 C C vc C C
8 C C vc C C
ALBUZ CVI 110 CVI 110015 CVI 11002 CVI 110025 CVI 11003 CVI 11004
ALBUZ AVI 110 AVI 11001 AVI 110015 AVI 11002 AVI 110025 AVI 11003 AVI 11004
Extremely coarse
Bar 1.5 F F m m m
agrotop xc turbodrop xc td 110015 xc td 11002 xc td 110025 xc td 11003 xc td 11004
Bar 2 C C C C C
2.5 C C C C C
3 C C C C C
3.5 C C C C C
4 C C C C C
4.5 C C C C m
5 C m m m m
Bar 3 vc vc vc vc xc xc
4 C C C C C vc
5 C C C C C vc
6 C C C C C vc
7 C C C C C vc
8 C C C C C vc
Bar 3 xc xc xc xc xc
4 xc xc xc xc xc
5 xc xc xc xc xc
6 xc xc xc xc xc
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
7 vc vc xc xc xc
Optima BUYERS’ GUIDE – JANUARY 2014
87
Section 4
Nozzles
TeeJet Nozzles
04 Red
03 Blue
025 Lilac
02 Yellow
015 Green
01 Orange
Nozzle Size
BAR
XR
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
F F F
dg
tt
tt j60
aixr
ai
xc xc xc xc xc xc xc
m F F
F F F
m F F
m F F
m m m
vc C C m
m F F
m m m
m m m
C m m
C C m m
vc C C C
C m m
C C C m
xc vc C C
C m m
C C m
C C C C
xc vc C C
C m m
C C C
C C C C
xc vc vc C
m F F
tti
vc C C C C C vc vc C C C C vc vc vc C C C vc vc vc C C C vc vc vc vc C C
xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc
Fertiliser Flow Rate Chart (L/Min) ALBUZ ESI Flow Rate Chart (L/min) bar
1 1.5 2 2.5 3 3.5 4
015
02
025
03
04
05
06
0.37 0.44 0.50 0.55 0.60 0.64 0.68
0.52 0.61 0.68 0.74 0.80 0.85 0.9
0.64 0.76 0.85 0.93 1.00 1.06 1.12
0.77 0.91 1.02 1.12 1.20 1.28 1.35
1.03 1.21 1.36 1.49 1.60 1.7 1.8
1.35 1.56 1.73 1.87 2.00 2.11 2.22
1.62 1.87 2.07 2.25 2.40 2.54 2.66
Note: ALBUZ ESI nozzles are ISO colour-coded.
ALBUZ EXA Flow Rate Chart (L/min) bar 1 1.5 2 2.5 3
3.5
YELLOW
RED
GREEN
BLUE
WHITE
BROWN
GREY
BLACK
0.35 0.43 0.50 0.56 0.61
0.59 0.71 0.80 0.89 0.97
0.67 0.81 0.92 1.01 1.10
0.86 1.03 1.17 1.29 1.40
1.39 1.63 1.83 2.00 2.15
1.90 2.24 2.51 2.74 2.95
2.25 2.63 2.95 3.21 3.45
3.00 3.51 3.93 4.28 4.60
0.66
1.04
1.18
1.50
2.29
3.14
3.66
4.89
Note: ALBUZ EXA nozzles are NOT ISO colour-coded.
Conversion Rate
The flow rates for the ALBUZ EXA and ESI are given for water. Liquid fertiliser has a very different viscosity and a conversion factor must be used to find the correct flow rate. (approximately 1.1 for a density of 1.2, 1.15 for a density of 1.3 and 1.2 for a density of 1.4). For example, if using a liquid nitrogen product with the density of 1.3 and the desired flow rate is 2 L/min, the correct value to look for in the table would be 2.3 L/min (1.15 (factor) x 2 L/min).
88
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
Droplet Trajectory Comparison
FrontBack
FrontBack
droplets Trajectory of
Direction of Application 50º
Trajectory of droplets
Direction of Application
10º
Flat fan nozzle
Angled twin nozzle
Twin Caps
Twin Cap Spray Example
Spraying at Angles Application speed has an important influence on droplet trajectory. The coarser the spray quality, the more important this factor becomes as larger droplets have more initial momentum and greater velocity. Traditional flat fan nozzles face vertically downward. During application the force from the driving speed deflects the downward orientated droplets forward. Consequently, when the target area is reached the droplet trajectory is forward orientated. The higher the speed the more pronounced the effect. The coverage of the back side of target plants is always compromised under these circumstances. In knockdown, pasture or fallow situations this is not an issue but particular postem applications with fungicides and insecticides can suffer from insufficient plant coverage.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Hollow cone nozzles have a fit in these situations at very low speeds. However, there are a number of flat fan nozzles with an angled spray pattern available to overcome this problem more efficiently, e.g. Turbo TeeJet TwinJet, TwinJet, DG TwinJet or agrotop HiSpeed. The most versatile angle set-up for speeds up to 10 km/h consists of a twin cap nozzle body that can be fitted with conventional XR TeeJet or agrotop AirMix nozzles or any combination of them. However, the backward orientated fan orientation is, like most other angled nozzles, only 30º and therefore too low to overcome the forward orientation at higher speed. A nozzle such as the agrotop HS with a 50º backward orientation enables a backward droplet trajectory in speeds up to 15 km/h.
Optima BUYERS’ GUIDE – JANUARY 2014
89
Section 4
Nozzles
Spraying in Stubbles The sharp increase in minimum tillage and no till farming has left many paddocks with a heavy stubble load. In those situations it is difficult to penetrate the stubble cover and achieve satisfactory coverage on the ground. Getting trapped on stubbles generally inactivates most herbicides. Many trials have shown that anticipating losses and choosing a robust product rate is most beneficial for efficacy. So is an increase in water volume and spray quality. COARSE or VERY COARSE droplets have more potential to bounce of the stubbles and land on the ground or target underneath.
Top Tips • Increase product rate • Increase water volume • Increase Spray quality to COARSE – VERY COARSE • Decrease fan angle in erected stubble • Increase spray height in erected stubble (only with minimum COARSE spray quality) • Consider using the TurboDrop nozzle.
In erected stubbles the vertical structure of the stubble row interferes with the side movement of the spray fan and can filter out spray droplets. Options to improve efficacy are to decrease the spray angle by using less than a 110° nozzle and to raise the boom height (only when using COARSE to VERY COARSE spray quality – be aware of drift!) to allow droplets a more vertical fall. This makes the agrotop TurboDrop to an ideal nozzle for stubble application. It produces a COARSE to VERY COARSE spray quality. On the paper the nozzles should produce a 110° fan angle but in reality it is more a 95°–100° angle.
Spraying Small Targets In broadacre spraying the applicator manipulates coverage mainly through droplet size and water volume. The likelihood to hit small targets can be increased with higher water volumes or by producing more droplets with a finer spray quality. If only few droplets hit a target using robust product rates increase the likelihood of delivering the lethal dose. In general, if coverage on small targets becomes a critical issue increasing the water rate is more efficient than using smaller droplets.
Most robust results on small targets are generally achieved with water rates above 80 L/ha. Many trials over recent years indicate that control of even small grass targets, when using these water rates, is at least as reliable with a COARSE spray quality as it is with a FINE/MEDIUM spray quality.
To optimise application when targeting small grasses it is advisable to increase water rates, regardless of spray quality or chemistry. If water rates are low (40– 70 L/ha) a FINE/MEDIUM spray quality is likely to be more successful than a COARSE spray quality – under ideal conditions. Under adverse weather conditions, wind or heat may reduce the efficacy of a FINE droplet application to below the efficacy levels of a COARSE droplet application.
90
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
Low Pressure Air-Induction Nozzles NOZZLE
TYPE AND DESCRIPTION
#1 Seller AirMix
GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE
• Air-induction nozzle • Recommended range: 3–5 bar • Protected air inlets • 80–90% drift reduction
m C
Merchandising pack 10 AirMix nozzles (see page 108)
ALBUZ CVI 110°
• Air-induction nozzle • Recommended range: 2.5–5 bar • Pink ceramic • High wear resistance
AIXR TeeJet
• Air-induction nozzle • Flat-fan tapered type • 1–6 bar pressure range (manufacturer) • Croplands recommended range: 3–5 bar • 90% drift reduction
TDAM-110**
SIZE RANGE, MATERIAL SPRAY ANGLE • **01 to 06 sizes • Polymer tip • 110°
$ (EX. GST)
8.95
$ (INC. GST) PROD. CAT.
9.85 Z
PR**-TDAM
**015, 02, 025, 03, 04 sizes
85.00
93.50
C
AZ-CVI-110**
• **015 to 05 sizes • Ceramic tip • 110°
20.82
22.90
Z
m C
AIXR11002-VP
• 015 to 06 sizes • Polymer tip • 110°
10.82
11.90
Z
CERAMIC 3x as durable
High Pressure Air-Induction Nozzles NOZZLE
TYPE AND DESCRIPTION
TurboDrop
GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE
• Air-induction nozzle – 2 piece • Fully ceramic • 4–8 bar pressure range • 95% drift reduction
C vc
Merchandising pack 5 x TDCFFC1100*
ALBUZ AVI
• High pressure airinduction nozzle, flat fan 110° • 3–8 bar pressure range • 90% drift reduction • Also available in 80°
C
AI TeeJet
• Air-induction nozzle • Flat-fan tapered type • 2–8 bar pressure range (manufacturer) • Croplands recommended range: 4–8 bar • 90% drift reduction
C vc
SIZE RANGE, MATERIAL SPRAY ANGLE
TDCFFC110**
• **01 to 10 sizes • Ceramic tip • Ceramic injector • 110° (reduced angle at lower pressures)
PRTD-*
*01, 015, 02, 025, 03 sizes
AZ-AVI-*015110C AZ-AVI-*01580C
AI11002-VS
$ (EX. GST)
$ (INC. GST) PROD. CAT.
CERAMIC 23.55
25.90
115.00
126.50
3x as durable Z
CERAMIC 3x as durable
• Sizes 01 to 10 in 110° • 01 to 04 in 80° • Pink ceramic
20.82
22.90
Z
• 015 to 08 sizes • Stainless steel tip, polymer body • 110°
19.82
21.80
Z
Nozzles for EXTREMELY COARSE Spray Quality NOZZLE
TYPE AND DESCRIPTION
agrotop XC TurboDrop
Turbo TeeJet AI (TTI)
GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE
SIZE RANGE, MATERIAL SPRAY ANGLE
• Air-induction nozzle • 3 – 7 bar pressure range • 99% drift reduction
xc
• 01 to 10 sizes TDPFFP11002XC • Polymer • 110°
• Air-induction nozzle • Anvil-type • 1–7 bar pressure range (manufacturer) • Croplands recommended range: 2–7 bar • 99% drift reduction
xc
TTI1100**-VP
Merchandising pack 10 x TTI1100*-VP (see page 108)
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
PRTTI-*
• **015 to 06 sizes • Polymer tip • 110°
*015, 02, 025, 03, 04 sizes
$ (EX. GST)
$ (INC. GST) PROD. CAT.
16.00
17.60
10.82
11.90
Z
Z
108.20
119.02
Optima BUYERS’ GUIDE – JANUARY 2014
91
Section 4
Nozzles
Pre-orifice flat fan nozzles NOZZLE
TYPE AND DESCRIPTION
ALBUZ ADI
DriftGuard TeeJet
GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE
• Drift reduction flat-fan 110° • 2–4 bar • Easy to dismantle and clean • 50% drift reduction
m
• Pre-orifice type nozzle • Flat-fan tapered type • 2 bar pressure (manufacturer) • Croplands recommended range: 2–4 bar
m
SIZE RANGE, MATERIAL SPRAY ANGLE
$ (EX. GST)
$ (INC. GST) PROD. CAT.
CERAMIC 3x as durable
AZ-ADI-110-02
• 01 to 04 sizes • Pink ceramic • 110°
8.64
9.50
DG11003-VP
• 015 to 05 sizes • Polymer tip • 110º
8.55
9.40
Z
Z
Merchandising pack 10 x DG110**-VP
PRDGVP-**
**015, 02, 03, 04 sizes
• Anvil-type nozzle • 1.5–3 bar pressure range (manufacturer) • Croplands recommended range: 2–4 bar
TT11002-VP
• 01 to 08 sizes • Polymer tip • 110°
m C
85.50
94.05
9.82
10.80
Turbo TeeJet
Z Merchandising pack 10 x TT1100*-VP (see page 108)
PRTT*-
*015, 02, 025, 03, 04 sizes
94.05
103.46
Conventional nozzles NOZZLE
TYPE AND DESCRIPTION
agrotop TipCap
• Tip and cap combined • 1.5–3 bar pressure range
GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE
SIZE RANGE, MATERIAL SPRAY ANGLE
$ (EX. GST)
$ (INC. GST) PROD. CAT.
TCP11002
• 02 to 08 sizes • All polymer • 110°
F m
AZ-AXI-110015
• 015 to 05 sizes • 110° • Pink ceramic
7.45
8.20
Z
F m
XR1100**-VP
• **015 to 08 sizes • Polymer tip • 110°
4.64
5.10
Z
F m
4.95
5.45
Z
CERAMIC ALBUZ AXI
XR TeeJet
92
• Conventional flat-fan • Croplands recommended range: 1.5–3 bar
• Flat-fan tapered type • 1–4 bar pressure range (manufacturer) • Croplands recommended range: 1.5–3 bar • M to C in 05 to 08 Size
www.croplands.com.au
3x as durable
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
ANGLE spraying nozzles NOZZLE
GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE
TYPE AND DESCRIPTION TurboDrop HS (Dual Angle)
• Air-induction nozzle • Fully ceramic • 4–8 bar pressure range • 90% drift reduction • 60° angle, 10° forward, 50° backward
AirMix Angle Spray Combo • Includes TD-TWIN cap and 2 AirMix nozzles (please specify size) • 60° angle
ALBUZ CVI Twin
• High-pressure twin angle air-induction • 65° angle between 2 110° flat fans • 90% drift reduction
SIZE RANGE, MATERIAL SPRAY ANGLE
m C
• 015 to 05 sizes • Ceramic tip TDCFFC11002DA • Ceramic injector • 110°
m C
TDTWIN-AM**
• 01 to 06 sizes • Polymer tip
AZ-CVIT-11002
• 015 to 05 sizes • Pink ceramic • 110°
C
$ (EX. GST) $ (INC. GST)
PROD. CAT.
CERAMIC 3x as durable 38.73
42.60
Z
27.73
30.50
Z
CERAMIC 3x as durable 24.73
27.20
Z
AI Turbo TwinJet
• Air-induction • 60° between leading and trailing spray patterns • Best suited to post emergence applications • Recommended range: 3–5 bar
C vc
• 02 to 06 sizes AITTJ60-110**VP • Polymer tip • 110°
12.18
13.40
Z
Turbo TwinJet
• Anvil-type nozzle (twin) • 1–6 bar pressure range (manufacturer) • Croplands Recommended range: 1.5–3 bar
m C
• 02 to 06 sizes TTJ60-11002-VP • Polymer tip • 110°
11.73
12.90
Z
Fertiliser Nozzles SAMPLE ORDER CODE
DESCRIPTION
AZ-EXA-BN
• 3-stream liquid fertiliser application • 1–3.5 bar • Very Coarse droplets • For flow rate chart see website
8.18
9.00
Z
AZ-ESI-02
• 6-stream liquid fertiliser application • Pink ceramic • 1–4 bar • Very Coarse droplets • ISO colour coded • For flow rate chart see website
8.73
9.60
Z
SJ3-**VP (** denotes size)
• 3-orifice StreamJet for fertiliser application • Acetyl construction for chemical resistance • Available in sizes: ** 015, 02, 03, 04, 05, 06, 08, 10, 15 and 20 (ISO coding) • For use with TeeJet cap 25598-3-NYR, at 500mm spacings
13.27
14.60
Z
SJ7-**-VP (** denotes size)
• 7-orifice StreamJet for fertiliser application • Acetyl construction for chemical resistance • Available in sizes: **015, 02, 03, 04, 05, 06, 08, 10 and 15 (ISO coding) • For use with TeeJet cap 25598-3-NYR, at 500mm spacings
16.91
18.60
Z
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
93
Section 4
Nozzles
Spray Drift is a major concern in most agricultural areas today. The presence of sensitive areas located within close proximity to the spray target area introduces the possibility of off-target deposition. It is more important than ever that the agricultural industry demonstrates responsible chemical usage to reduce the need for severe application restrictions. For further information on chemical application or involvement in a Spraywise training course, please contact your local Nufarm Territory Manager at www.nufarm.com.au
94
Inversions • DANGER – DO NOT spray when a low-level inversion exists • During those inversions distinct, isolated layers of air have formed close to the ground. As a result driftable fines are not subject to dilution with the atmosphere • Low-level inversions frequently form in the late evening and strengthen overnight – they are
strongest near sunrise • Use visual indicators such as moisture, smoke or dust to determine if a low-level inversion is present • Rule of thumb: the greater the difference between daily maximum and minimum temperatures, the stronger the low-level inversion.
Night Spraying • The advent of GPS self-steer and a desire to work within appropriate Delta Ts has seen an increasing trend towards night spraying, particularly during the summer months. Spraying at night dramatically increases the chance of applying product in adverse conditions
• Night spraying can strongly favour conditions that can trap and move the applied product far from the target area (see inversions). Be particularly vigilant one hour either side of sunrise • Be aware that the rainfast period will be longer • Obtain forecast and monitor for still or low-level inversion conditions.
Wind Speed and No-Spray (Buffer) Zones • It is best to apply pesticides when the wind is blowing away from sensitive areas and crops. Wind speed must be steady between 3 km/h and 15 km/h • If the wind stops blowing at night – stop spraying immediately (see inversions)
• Always read the label to see if a mandatory wind speed requirement exists, or if a Nospray zone is required for any of the products you plan to use • Rule of thumb: most directional wind changes in Australia will occur in an anti-clockwise direction.
Spray Weather Summary • Avoid calm, variable or gusty wind (calm conditions give no positive indication of droplet displacement) • Be aware of local topographic and convective influences on wind speed and direction • At night the cool (heavier) air behaves like water and drains to lower points (waterways, frost-prone paddocks) taking any fine droplets
suspended in the air with it as well • Record on-site weather conditions at the start and finish of every pesticide application.
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
Plan • Utilise tools such as www.spraywisedecisions.com.au to plan the most appropriate application windows • Spraying in a cotton area? Check www.cottonmap.com.au for neighbouring fields prior to application
• Read the product label • Communicate with neighbours • Upskill by attending a Nufarm Spraywise training course or one run by specialist application consultants such as Bill Gordon, Graham Betts or Craig Day.
Boom Height/False Target • Boom height needs to be adjusted to the height of the false target (stubble height) or the height of the target – whichever is greater • Keep boom height to a minimum (i.e. 500mm above target/false target for 110° nozzles at 500mm nozzle spacing)
• Increasing the boom height from 500mm to 700mm may double the amount of driftable fines and a boom height increase from 500mm to 1,000mm multiplies them up to four times.
Spray Quality • A COARSE to VERY COARSE spray quality must be used when applying 2,4-D products – EXTREMELY COARSE may be warranted if night spraying • Choose the nozzle producing the coarsest spray quality without compromising efficacy. Refer to Nufarm’s Boom Spray Application Guide for a full range of recommended water rates and
spray qualities for all Nufarm products • If needed, include drift-reducing adjuvants such as LI 700, Activator or Bonza • Use nozzles at appropriate pressure: conventional nozzles 1.5–3 bar, pre-orifice nozzles 2–4 bar, low pressure airinduction nozzles 3–5 bar, high pressure air-induction nozzles 4–8 bar.
Selecting the right delta T conditions for spraying
NEVER SPRAY DURING A LOW-LEVEL INVERSION
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
95
Section 4
Nozzles
Nozzles – Specialised application (banding, off-centre, turf, flood and BoomJet) NOZZLE
TYPE AND DESCRIPTION
SAMPLE ORDER CODE
SIZE RANGE, MATERIAL SPRAY ANGLE
$ (EX. GST)
$ (INC. GST) PROD. CAT.
ALBUZ OCI
• Ceramic • Off centre
AZ-OCI-02-80C
• 02, 03 and 04 sizes • Pink ceramic • 80°
24.73
27.20
Z
ALBUZ AVI
• Air-induction • Off centre
AZ-AVIOC-8002
• 01 to 04 sizes • Pink ceramic • 80°
38.36
42.20
Z
Turbo TurfJet
• Wide angle flat spray pattern • Extremely coarse droplets • Designed for turf applications • 1.5–5 bar pressure range
¼TTJ05-VP
• 02 to 15 polymer
13.18
14.50
¼TTJ05-VS
• 02 to 15 stainless steel
25.45
28.00
TF-VP4
• 2 to 10 polymer
4.45
4.90
TF-VS4
• 2 to 10 steel
19.64
21.60
17.64
19.40
Z
386.09
424.70
Z
74.73
82.20
Turbo FloodJet
• Wide angle flat spray pattern • Extremely coarse droplets • Precise distribution pattern • 1–3 bar pressure range
FloodJet
• Wide angle flat spray pattern • 1–3 bar pressure range
TK-VS3
• 2 to 10 stainless steel tip, polymer body
BoomJet
• Large capacity boomless nozzle • Extra-wide flat spray projection • Ideal for difficult access areas when spraying • Useful for liquid fertiliser applications
5880-¾-2TOC20
• 10 to 40 brass
XP BoomJet
• Boomless flat spray nozzles • Useful for roadside, end-row, orchard or forestry applications • Extra-wide spray pattern • Left and right options • 1–4 bar pressure range • Excellent distribution
B¼XP20L-VP B¼XP20R-VP
• 10, 20 and 25¼” acetal left and right options
B½XP40L-VP B½XP40R-VP
• 40 and 80 ½” acetal left and right options
Z
Z
Z 88.91
OU
O TA RT
L QUALITY
COM
MI
TM
E
NT
CROPLA
97.80
2 YEA
NDS
R
WARR A jE
CT
Spraywise Logbook
T
Spraywise Broadacre Application Handbook
O
Handbook, Logbook and Calibration Guide
An easy to use spray logbook for farmers and cooperatives. The applicator can detail weather and growing conditions, location, mix-up and set-up details. Includes 50 pages with double carbon copies, Spraywise nozzle chart, application guide, mixing guide and valuable tips to avoid drift.
SPRAYWISEBK
Spraywiselog Spraywise Logbook
96
N ds TER s ANd CO M
dI
TI
ON
Features Temperature in °C or °F Relative humidity in % (does not need re-calibration) Wet bulb temperature in °C or °F Dewpoint in °C or °F Delta T in °C or °F
Spraywise Logbook
Spraywise Application Handbook
LAN
NTY
Weather plays an important part during application. Measuring conditions on the spot such as wind speed, Delta T and temperature make a vital difference in the daily decision making of an applicator. Recording weather data is a mandatory label requirement. For everybody who applies chemicals, the WindMate is a must have tool.
The Spraywise Broadacre Application Handbook guides the reader through the complex process of spray application. It deals with how to choose and use the right nozzle for specific applications, boom set-up, unfavourable weather conditions and many more essential topics. It enables growers to make informed decisions about how to increase their operational flexibility without losing efficacy (60 pages).
DESCRIPTION
Op
ATE
WindMate Hand-Held Weathermeter
Spraywise Broadacre Application Handbook
ORDER CODE
CR
s
sUb
ON WINDM
$ (EX. GST) $ (INC. GST) PROD. CAT. 45.36
49.90
X
20.90
23.00
W
www.croplands.com.au
Windspeed in Km/hr, MPH, knots, M/Sec, Ft/min, Beaufort (gives maximum and average) Compass and wind direction (using wind vane) Comfort index (takes into account the impact of wind, temperature, relative humidity and sun strength
ORDER CODE
DESCRIPTION
L-H6001
WindMate
$ (EX. GST)
$ (INC. GST)
250.00
275.00
PROD. CAT. X
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
calibration SuMMary Boom sprayers need to be correctly calibrated in order to deliver the desired amount of chemical onto the target. A poorly calibrated boom sprayer may result in: • Increase in chemical costs • Increase in crop effect • Decrease in efficiency
• Calculator • Nozzle cleaning brush • Tape measure, or other device to measure a distance of 100m Before starting the calibration the spray equipment needs to be checked to eliminate basic faults.
• Potential loss in yield Even a minor 10 % change in flow rate will add up to large sums… Therefore it is advisable to calibrate the boom sprayer at least every 12 months. This is less complicated than many people think. The following procedure is aimed to provide a practical on-farm guide.
• Nozzles – all fitted nozzles should be of the same type and size. Their spray pattern should be even (nozzles and strainers may need to be cleaned and may need to be replaced if necessary). • Boom – hoses and joins should be checked for leaks. All systems should be in operating order.
The following equipment is needed:
• Tank – should be half filled with water.
• A watch, displaying seconds
The boom spray calibration is affected by two main factors:
• A jug, displaying a volume scale
A) Travel speed (Step 1) and
• At least one new nozzle of the type fitted onto the boom
B) The output of nozzles (Step 2 – 5)
• Nozzle tip reference tables to determine flow rates and spray quality (available from Nufarm/Croplands)
In the following procedure these two factors are checked independently, but ultimately, they are inseparably linked together.
Step 1: Speed calibration To measure travel speed accurately it is important to do so by travelling over an exact distance (commonly 100 m) and to measure the time it takes to travel that distance. To mark the precise distance the use of a measuring tape is essential. Permanent markers will make this measured stretch a handy tool on farm. It is advisable to undertake the calibration in the gear and RPM’s the applications are commonly done with. The tank should be half filled. Sufficient run up assures that the starting line is crossed already travelling at desired speed.
20 sec
It is worthwhile to repeat the procedure at least twice to eliminate any possible error. The travel speed in km/h can then be calculated from this simple formula: km/h = Distance (m) x 3.6 / time (sec). eXaMple It took 20 sec (measured twice to be sure) to travel 100 m. The speed is 100 m x 3.6 / 20 sec = 18 km/h.
noteS:
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
97
Section 4
Nozzles
Step 2: calculation of nozzle flowrate At first it is necessary to work out what the nozzle output should be. The nozzles can then be checked to see if they are delivering the flow rate they are supposed to deliver. For this calculation three things need to be determined: 1) What is the preferred application speed (already measured) 2) What is the preferred water rate per ha application VoluMe 3) What is the nozzle spacing on the rig nozzle Spacing The most common spacing between nozzles on boom sprayers is 50 cm. It is important to be sure about the correct nozzle spacing, and if in doubt, measuring is advisable. eXaMple The measurement was 50 cm.
The desired application volume in L/ha can be obtained from pesticide labels or other publications from manufacturers (e.g. Nufarm Boom Spray Application Guide). EXAMPLE
The product used was Weedmaster DST for control of summer weeds and the information from Nufarm advised that 40–70 L/ha was a sufficient water rate. Because the paddock contained stubble, it was recommendable to use a higher water rate. Therefore the 70 L/ha rate was chosen.
calculation
L/min/nozzle =
L/ha x km/h x W(m) 600
L/min/nozzle
= Nozzle flow rate in litre per minute
L/ha
= Water application rate per hectare
Km/h
= Driving speed
W
= Width of nozzle spacing in m
600
= Constant
1,984 ÷ x 9 – 6 + 2 3 = . c
mc mr m+ m–
A simple formula is transforming all this ‘large scale’ application information into a single, easy to measure ‘output per nozzle, per minute’ figure.
7
8
4
5
1 0
1,984 ÷ 9 x 6 – + 2 3 . c =
m+ m– mc mr
7 4 1 0
8
5
eXaMple The desired water rate was 70 L/ha, applied with a speed of 18 km/h and the boom had a nozzle spacing of 50 cm: L/min =
70 L/ha x 18 km/h x 0.5 m 600
= 1.05 L/min
To achieve this goal every single nozzle needed to deliver 1.05 L/min.
Step 3: Selecting preSSure and Spray quality Nozzles deliver different flow rates and droplet sizes (more commonly called spray quality) at varying pressures. The pressure needed to produce a certain flow rate for a specific nozzle type and size can be found in specific tables (Croplands Optima Catalogue, Nufarm Nozzle Charts, TeeJet Catalogue). For efficacy and legal reasons it is important to be clear about the spray quality a specific nozzle type is going to produce. If in doubt an advisor should be consulted. For example, it is not desirable to calibrate and set up a nozzle type and size that can only spray FINE to MEDIUM spray quality when the chemical that is going to be put out has to be sprayed with a COARSE to VERY COARSE spray quality. To minimise chemical loss through drift it is advisable to choose a set up that is producing the coarsest spray quality without compromising efficacy. Desired spray quality information can be obtained from chemical labels or additional information put out by manufacturer (e.g. Nufarm Boom Spray Application Guide, Croplands Optima Catalogue).
98
www.croplands.com.au
eXaMple To control summer weeds, the chemical chosen was Weedmaster DST, selecting a COARSE spray quality, according to the Nufarm Boomspray Application Guide. The boom was fitted with AirMix 025 nozzles. According to the Nufarm Nozzle Chart reference, the pressure set up needed to be around 3.3 bar to get the desired flow rate of 1.05 L/min. The Nufarm Nozzle Chart showed that at 3.3 bar this nozzle type and size is producing a COARSE spray quality. Therefore this nozzle type was suited for the planned application. The boomsprayer needed to be set up to spray at 3.3 bar to deliver the desired flowrate and spray quality.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
Step 4: preSSure Set-up All the theoretical work on nozzle flow rates is now finalised. At least one old nozzle needs to be replaced with a new nozzle of the same type (the old nozzles may be worn). The sprayer can be turned on now and the desired pressure can be selected. If the pressure gauge is measuring the pressure at the nozzle end, measuring can start now. However, many gauges are measuring the pressure at the pump end. In this case one nozzle needs to be replaced with a nozzle pressure Gauge (obtainable from Croplands) to measure the correct pressure at the nozzle end. As a rule of
thumb, if the pressure between pump and nozzle end varies by more than 20 % there is a serious pressure drop and the system should be checked. The tank should be filled with water only since all table values are based on water.
Step 5: MeaSuring nozzle flow rate While spraying, a jug must be placed underneath the new nozzle to collect fluid for a duration of 60 seconds. Effectively this is measuring the output per nozzle per minute. If the output is too high for the scales of the jug, the time may be halved to 30 sec. In this case the measured volume needs to be doubled to refer back to a per minute output. The measured volume can now be compared to the theoretical value calculated above. Depending on the difference, the pressure may need some fine-tuning to obtain exactly matching flow rate values. Individual nozzle outputs may vary. Therefore, measurements should be repeated with a minimum of three nozzles per boom section to check for nozzle wear. All outputs should be within a 10% range. If more than one nozzle is out of range, the whole nozzle set should be replaced.
psi
60 sec
eXaMple An old Airmix 025 was replaced with a new one. The pressure was set at 3.3 bar at the nozzle end. The measured flow rate of the new nozzle was 1.0 L/min. Therefore the pressure needed to be slightly increased to 3.5 bar and the flow rate was brought up to the desired 1.05 L/ min for the new nozzle. The boom had 5 sections and therefore measurements needed to be repeated for three nozzles in each section. Results were: 1.05
1.00
1.05
1.00
1.15
1.05
1.15
1.05
1.00
1.00
1.05
1.00
1.05
1.15
1.00
Three of the nozzles had a flow rate differing by around 10 % from the desired out put. A re-check of those three nozzles gave the same result. Therefore, there was little confidence in the future performance of the whole set. The two-year-old set needed to be replaced. After replacement, the new nozzles were checked again and flow rates were uniform at 1.05 L/min.
Step 5b: alternatiVe MeaSuring of nozzle flow rate Rather than using a jug and timer, an instant Tip Tester can be used. This method is not as accurate but handy to do a quick check or compare many nozzles in a short space of time. The Tip tester has a rubber seal that is placed tightly over the nozzle. The actual flowrate coming out of the nozzle pushes up a little ball in a tube. By looking at the position of the ball the flow rate can be read directly from a scale (see picture).
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
99
Section 4
Nozzles
Step 6: autoMatic rate controller At the initial set up of the machinery, precise inputs Many boom sprayers are set up with automatic rate into the rate controller would have assured precise controllers that will allow a constant per ha output operation. with varying speeds by adjusting the flow rate. However, over time, machinery will wear, therefore, The two main factors governing the system are it is important to check if initial inputs are still in again the precise measuring of: calibration. A) Speed B) Flow rate flowMeter
Speed
The greater the water volume measured the more precise the outcome will be. It is not practical to obtain overall boom flow rates through nozzles. Therefore the easiest way is to take off a section of boom hose (all other sections need to be closed) and to fill a measuring drum up to the 100 L mark. The 100 L volume can then be compared to the volume measured by the flowmeter. If necessary controller inputs need to be adjusted (refer to individual controller handbooks).
The actual procedure to reset the rate controller will be different from system to system but in principal it will be the same. An exactly measured 100 m distance (see Step 1) needs to be travelled and compared to the distance calculated by the rate controller. If necessary the controller inputs need to be changed (refer to controller handbook).
Calibration Kit
A complete kit to easily calibrate any spray boom accurately. Kit includes: »» Tip tester »» Gauge with quick-fit cap and seal to fit quick-fit nozzle bodies (includes Hardi adaptor seal for use on Hardi bodies) »» 1 litre measuring jug »» Protective gloves »» Manual and handy tool box for the components
Calibration Tip Tester
A very handy quick-check tip tester for use with most broadacre nozzle types. Provides a fast and independent measurement of a single nozzle’s flow rate. Slip the adaptor over the nozzle body and read the output off the tip tester.
10 0
www.croplands.com.au
SpotOn Sprayer Calibrator
»» »» »» »»
Avoid costly over or under application of chemicals Accurate flow rate measurement in seconds Quickly find worn spray nozzle tips Fast and simple operation
ORDER CODE DESCRIPTION
$ (EX. GST)
$ (INC. GST)
RP-034
Calibration kit
217.18
239.58
PROD. CAT. Y
L-H9200
SpotOn Sprayer Calibrator
271.82
299.00
X
37670
Tip Tester
156.28
171.91
Y
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
hollow cone
06 04
02
06
04
02
04
Hollow Cone Air-Induction Nozzles Drift avoidance becomes an ever increasing problem in horticultural tree and vine applications. Hollow cone air-induction nozzles, such as the ALBUZ TVI, utilise the well proven venturi principle to produce coarser droplets. Drift is reduced but so is coverage. The final verdict is still to come. Initial results indicate that air-induction nozzles provide good coverage when spraying dilute volumes. To make them work in concentrate spraying it is probably essential to have a very efficient sprayer (Quantum Mist) and to increase the spread of droplets with adjuvant technology (Du-Wett). In New Zealand the kiwi industry uses airinduction nozzles at certain applications as standard, but only in combination with well spreading adjuvants.
OPTIMAL PRESSURE RANGE
20
02
06
OPTIMAL PRESSURE RANGE
18
20
04
See page 105
14 16
18
OPTIMAL PRESSURE RANGE
12
06
08 16
02
14
See page 105
14
20
air induction
10
12
18
08
12
10
16
hollow cone
10
20
• the Core or swirl plate. The swirl plate has angled slots that force the liquid into a centrifugal spin • the following Swirl Chamber allows the liquid to settle into spin • the Disc, or orifice, that meters the final cone pattern when droplets are emerging. Cone nozzles can come as a fully assembled single nozzle body, e.g. ALBUZ ATR, or in separate parts that need to be assembled into a nozzle body, commonly referred to as Cones and Discs. Pressure used by operators is generally high (5–20 bar).
08
18
OPTIMAL PRESSURE RANGE
air induction
16
Cone Nozzles See page 106 10 12 1 4 08 The most commonly used nozzle types in horticulture are cone nozzles. Cone nozzles can be divided into hollow cone and solid cones nozzles. They have three principal parts:
Hollow Cone Nozzles Hollow cone nozzles produce generally a FINE to VERY FINE spray quality with a narrow droplet spectrum. The Disc has no hole in the centre and all the liquid is forced to spin. Their droplets emerge with a low kinetic energy and may not reach 2 metres if no air-assist is provided. The small, consistent droplet size and the low energy levels favour deposition and coverage and make them to the preferred nozzle type in air-assisted vine and tree spraying. The FINE droplets are prone to drift.
See page 106 Solid Cone Nozzles In contrast to a hollow cone set up, the cores of solid cones nozzles have an extra hole in the centre that allows part of the liquid to pass straight to the disc and fill the inner cone pattern. Those droplets travel straight with the airstream, have more kinetic energy and may reach as far as 4 metres without air-assist. The uniformity of droplet size is decreased with the centre hole producing coarser droplets. Distance is improved but the potential for deposition and coverage on short distance is reduced. Striping may occur if the canopy target is to close. Solid cones are generally used to achieve better coverage on distanced targets such as the top of a tree. See page 106 Solid Stream Jet In solid cone nozzles, the bigger the hole in the middle of the disc the more centred becomes the output. In a solid stream jet design the complete core is removed, leaving the nozzle only with a single orifice in the disc. All liquid travels in direction of the airstream, has high kinetic energy and may reach as far as 6 metres without air-assist. Spray quality is even coarser and short range deposition is further compromised. Because it is very difficult to achieve liquid breakup into droplets with this set-up it is paramount to use high pressures around 20 bar or above. Solid stream jets are used to cover even further distanced targets such as tops of tall trees.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Optima BUYERS’ GUIDE – JANUARY 2014
101
Section 4
Nozzles
Spraywise Orchard/Vineyard Nozzle Selection Step 1. Work out the dilute L/100m rate from the Spraywise Dilute table per row (page 103).
Step 3. Work out the individual flow rate for each nozzle. If all nozzle are the same size you can simply divide the total flow rate per row by the number of nozzles per row.
For example, a 1.5 metre grape VSP canopy has a dilute volume of 30 L/100m row (1.5 x 20 L).
For example, we have 24 nozzles per row and needed a total flow rate of 40 L/min. Each nozzle needs to put out 1.66 L/min (40/24). If several nozzle sizes are preferred the volume needs to be split. For example, rather than looking at all 24 nozzles putting out the same you could look at 12 nozzles putting out 25 L/min and 12 nozzles putting out 15 L/min. To obtain single nozzle flow rates simply divide the Total Flow/m
Use table 1 (page 104) to sanity check what this L/100m rate represents in L/ha. Select your row spacing and follow the column down until you reach 30 or the nearest number. If you follow the row to the left the table will give you the per ha volume. Or you can work reverse from the per ha rate to find the L/100m rate.
1
Total Flow (L/min) ‹—› Sing
2 Row Spacing (m) 1.6 1.6 2.4 3.2 4 11.2 12 12.8 14.4 16 17.6 19.2 21 22
1.8 1.8 2.7 3.6 4.5 12.6 13.5 14.4 16.2 18 19.8 22 23 25
2 2 3 4 5 14 15 16 18 20 22 24 26 28
2.1 2.1 3.1 4.2 5.2 15 16 17 19 21 23 25 27 29
2.4 2.4 3.6 4.8 6 17 18 19 21 24 26 29 31 33
2.5 2.5 3.8 5 6.3 17.5 18.8 20 23 25 28 30 33 35
2.7 2.7 4 5.4 6.7 18.9 20 22 24 27 30 32 35 38
2.8 2.8 4.2 5.6 7 19.6 21 22 25 28 31 34 36 39
1
1.5
2
2.5
3
16 20
12 15
9.6 12
28 76
21 57
16.8 46
8 10 12 14 38
136 144 152 160 168 176 184 192
102 6 108 114 7 120 126 8 132 9 138 144
82 86 91 96 101 106 110 115
68 72 76 80 84 88 92 96
4 5 6 7 19
24 30 36 42 114
4
34 204 36 216 38 228 40 240 42 252 44 264 46 276 Bar 48 288
Step 2. Work out the total flowrate of your pump per minute/row by matching the per 100m rate with your speed.
24 18 14.4 PRESSURE
5
Total Flow min) Formula
102
2 3 4 5 6 7 19
1.5 8 12 16 20 24 28 76
2 6 9 12 15 18 21 57
2.5 4.8 7.2 9.6 12 14.4 16.8 46
3 4 6 8 10 12 14 38
34 36 38 40 42 44 46 48
204 216 228 240 252 264 276 288
136 144 152 160 168 176 184 192
102 108 114 120 126 132 138 144
82 86 91 96 101 106 110 115
68 72 76 80 84 88 92 96
L/100 m ‹—› L/min Travel Speed (km/h) 3.5 4 3.4 3 5.1 4.5 6.9 6 8.6 7.5 10.3 9 12 10.5 33 29 58 62 65 69 72 75 79 82
51 54 57 60 63 66 69 72
4.5 2.7 4 5.3 6.7 8 9.3 25
5 2.4 3.6 4.8 6 7.2 8.4 23
5.5 2.2 3.3 4.4 5.5 6.5 7.6 21
6 2 3 4 5 6 7 19
45 48 51 53 56 59 61 64
41 43 46 48 50 53 55 58
37 39 41 44 46 48 50 52
34 36 38 40 42 44 46 48
L/100 m = L/min x 6 ÷ speed
6.5 7 8 9 10 1.8 1.7 1.5 1.3 1.2 2.8 2.6 2.3 2 1.8 3.7 3.4 3 2.7 2.4 4.6 4.3 3.8 3.3 3 5.5 5.1 4.5 4 3.6 6.5 6 5.3 4.7 4.2 17.5 16.3 14.3 12.7 11.4 31 33 35 37 39 41 42 44
29 31 33 34 36 38 39 41
26 27 29 30 32 33 35 36
L/min = L/100 m x speed ÷ 6
www.croplands.com.au
4
4.5
5
6.9 6 8.6 7.5 10.3 9 12 10.5 Yellow 33 29
5.3 6.7 8 9.3 25
4.8 6 7.2 8.4 23
4.4 4 5.5 5 6.5 6 7.6 7 Orange 21 19
58 51 62 0.8 54 65 57 0.86 69 60 72 0.92 63 75 66 79 0.97 69 82 72
45 48 51 53 56 59 61 64
41 43 46 48 50 53 55 58
37 34 1.0836 39 41 1.1738 44 40 46 1.24 42 48 44 1.32 50 46 52 48
23 24 25 27 28 29 31 32
5
BAR
0.73
10 m = L/min x 61.03 L/100 ÷ speed 11 1.07
5.5
6
6.5
7
8
9
10
0.99
3.7 3.4 3 2.7 2.4 4.6 4.3 3.8 3.3 3 5.5 5.1 4.5 4 3.6 6.5 6 Red 5.3 4.7 4.2 17.5 16.3 14.3 12.7 11.4
1.38
31 33 35 37 39 41 42 44
29 31 33 34 36 38 39 41
26
1.51 27 29 1.62 30 32 1.73 33 1.83 35 36
1.92 L/min1.39 = L/100 m x speed ÷6 1.45 2.01
23 24 25 27 28 29 31 32
20 22 23 24 25 26 28 29
Grey 1.5 1.63 1.76 1.87 1.98 2.08 2.17
12
1.12
1.51
2.09
2.26
13
1.17
1.57
2.17
2.35
14
1.21
1.63
2.25
2.43
For example, you want to drive 8 km/h. Find 8 km/h on the top of table 2 and follow the column down until you reach 30 or the nearest number. If you follow the row to the right the table will give you the total flowrate atr Hollow you need per row to put out 30 L/100m at 8 km/h. The flowrate is 40 L/min per row. PRESSURE
1 12 18 24 30 36 42 114
3.5
2 12 Hollow 8 6 4.8 4 3.4 Cone 3 2.7 2.4 Flowrate 2.2 2 1.8 1.7 1.5 1.3 chart 1.2 ATR 3 18 12 9 7.2 6 5.1 4.5 4 3.6 3.3 3 2.8 2.6 2.3 2 1.8
Formula
2
L/100 m ‹—› L/min Travel Speed (km/h)
Step 4. For example, having 24 nozzles per row and spraying 36 L/min r Match up pressure and nozzles size to achieve these Formula: Total output L/min = no of nozzles x single nozzle outpu outputs in table on page 105.
Total Flow min)
L/ha
100 150 200 250 700 750 800 900 1000 1100 1200 1300 1400
3
cone flowrate cHart Yellow
Orange
Red
0.73
0.99
1.38
Grey 1.5
6
0.8
1.08
1.51
1.63
7
0.86
1.17
1.62
1.76
8
0.92
1.24
1.73
1.87
9
0.97
1.32
1.83
1.98
10
1.03
1.39
1.92
2.08
11
1.07
1.45
2.01
2.17
12
1.12
1.51
2.09
2.26
13
1.17
1.57
2.17
2.35
14
1.21
1.63
2.25
2.43
20 22 23 24 25 26 28 29
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
Spraywise Dilute
General Guideline to Dilute Volume in Orchards and Vineyards
L/100 m per m Canopy Height 20
Apples, Pears
45
50 … 70
Fungicides some Miticides, PGRs
some Miticides Insecticides, some Oils some Oils, PGRs Fungicides
Grapes
VSP
Sprawl
some PGRs
Macadamias
Tomatoes
40
Fungicides
Citrus
Stonefruits
35
some Miticides
Cherries
Olives
30
Fungicides
Avocados
Mangoes
25
VSP
Sprawl
Fungicides some Miticides Fungicides some Insect./Miticides Insecticides
Fungicides some Insect./Miticides Fungicides
Trellis
some Insect./Miticides
= indicates Dilute Volume, sprayed to the point of run-off
IMPORTANT: •
Volumes are given for full canopy.
= indicates light Flood Volume, above the point of run-off (some miticides, insecticides and PGRs may benefit)
•
Volumes may vary according to canopy type, e.g. VSP vs Sprawl, shape and density. Use the lower end of the spectrum for easier to cover targets, e.g in grapes use 20–25 for VSP and 25–30 for Sprawl.
•
Height considers canopy height only - excluding the trunk.
•
Guidelines assume that the sprayer is set up to cover the canopy height. In early season grapevine applications the minimum sprayer width becomes the canopy height! For example, a QM head covers 1 m. It can not be reduced to cover 10 cm shoots only. Therefore the dilute volume has to operate on the minimum width the equipment can produce.
Example: A 3m high apple canopy should need a dilute rate between 60 and 75 L /100 m ( 3 x 20 or 3 x 25). As a sanity check, at a rowspacing of 4 m that converts to 1500 to 1900 L/ha (see table next page). If not sure which way to go, as a sophisticated guess, the middle should be close, e.g 70 L/100 m.
Rate for Early Season Applications in Deciduous Tree/Vine Crops (in L/100 m per m Canopy Height)
Budburst 14L
(70 % of 20 L)
1st Spray
BB + 10 days
16L
(80 % of 20 L)
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
2nd Spray
3rd Spray
18L
Full rate
BB+20 days
(90 % of 20 L)
BB+30 days
Optima BUYERS’ GUIDE – JANUARY 2014
103
Section 4
Nozzles
L/ha ‹—› L/100 m
1
Row Spacing (m) 1.6 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 9.6 11.2 12 12.8 14.4 16 17.6 19.2 21 22 24 26 27 29 30 32 40 48 64 80 96 112 128 144 160
L/ha
100 150 200 250 300 350 400 450 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2500 3000 4000 5000 6000 7000 8000 9000 10000 Conversion 62.5 Factor
1.8 1.8 2.7 3.6 4.5 5.4 6.3 7.2 8.1 9 10.8 12.6 13.5 14.4 16.2 18 19.8 22 23 25 27 29 31 32 34 36 45 54 72 90 108 126 144 162 180
2 2 3 4 5 6 7 8 9 10 12 14 15 16 18 20 22 24 26 28 30 32 34 36 38 40 50 60 80 100 120 140 160 180 200
2.1 2.1 3.1 4.2 5.2 6.3 7.3 8.3 9.4 10 13 15 16 17 19 21 23 25 27 29 31 33 35 38 40 42 52 63 83 104 125 146 167 188 208
2.4 2.4 3.6 4.8 6 7.1 8.3 9.5 11 12 14 17 18 19 21 24 26 29 31 33 36 38 40 43 45 48 60 71 95 119 143 167 190 214 238
55.5
50
47.6
41.7
Formula
Total Flow Rate of All Nozzles (L/min)
2
Formula
10 4
Table unit L/100 m
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58
2.5 2.5 3.8 5 6.3 7.5 8.8 10 11.3 12.5 15 17.5 18.8 20 23 25 28 30 33 35 38 40 43 45 48 50 63 75 100 125 150 175 200 225 250
2.7 2.7 4 5.4 6.7 8.1 9.4 10.8 12.1 13.5 16.2 18.9 20 22 24 27 30 32 35 38 40 43 46 49 51 54 67 81 108 135 162 189 216 243 270
2.8 2.8 4.2 5.6 7 8.4 9.8 11.2 12.6 14 16.8 19.6 21 22 25 28 31 34 36 39 42 45 48 50 53 56 70 84 112 140 168 196 224 252 280
2.9 2.9 4.4 5.8 7.3 8.7 10.2 11.6 13.1 14.5 17.4 20 22 23 26 29 32 35 38 41 44 46 49 52 55 58 73 87 116 145 174 203 232 261 290
3 3 4.5 6 7.5 9 10.5 12 13.5 15 18 21 23 24 27 30 33 36 39 42 45 48 51 54 57 60 75 90 120 150 180 210 240 270 300
3.1 3.1 4.7 6.2 7.8 9.3 10.9 12.4 14 15.5 18.6 22 23 25 28 31 34 37 40 43 47 50 53 56 59 62 78 93 124 155 186 217 248 279 310
3.2 3.2 4.8 6.4 8 9.6 11.2 12.8 14.4 16 19.2 22 24 26 29 32 35 38 42 45 48 51 54 58 61 64 80 96 128 160 192 224 256 288 320
3.3 3.3 5 6.7 8.3 10 11.7 13.3 15 16.7 20 23 25 27 30 33 37 40 43 47 50 53 57 60 63 67 83 100 133 167 200 233 266 300 333
3.5 3.5 5.3 7 8.8 10.5 12.3 14 15.8 17.5 21 25 26 28 32 35 39 42 46 49 53 56 60 63 67 70 88 105 140 175 210 245 280 315 350
3.6 3.6 5.4 7.2 9.0 10.8 12.6 14.4 16.2 18 22 25 27 29 32 36 40 43 47 50 54 58 61 65 68 72 90 108 144 180 216 252 288 324 360
4 4 6 8 10 12 14 16 18 20 24 28 30 32 36 40 44 48 52 56 60 64 68 72 76 80 100 120 160 200 240 280 320 360 400
4.5 4.5 6.8 9 11.3 13.5 15.8 18 20 23 27 32 34 36 41 45 50 54 59 63 68 72 77 81 86 90 113 135 180 225 270 315 360 405 450
5 5 7.5 10 12.5 15 17.5 20 23 25 30 35 38 40 45 50 55 60 65 70 75 80 85 90 95 100 125 150 200 250 300 350 400 450 500
5.5 5.5 8.3 11 13.8 16.5 19.3 22 25 28 33 39 41 44 50 55 61 66 72 77 83 88 94 99 105 110 138 165 220 275 330 385 440 495 550
40
37.0
35.7
34.5
33.3
32.3
31.3
30.3
28.6
27.8
25
22.2
20
18.2
L/100 m = L/ha ÷ 100 x rowspacing (m)
1
1.5
2
2.5
3
12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 132 144 156 168 180 192 204 216 228 240 252 264 276 288 300 312 324 336 348
8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 88 96 104 112 120 128 136 144 152 160 168 176 184 192 200 208 216 224 232
6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144 150 156 162 168 174
4.8 7.2 9.6 12 14.4 16.8 19.2 22 24 26 29 31 34 36 38 41 43 46 48 53 58 62 67 72 77 82 86 91 96 101 106 110 115 120 125 130 134 139
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 108 112 116
6 6 9 12 15 18 21 24 27 30 36 42 45 48 54 60 66 72 78 84 90 96 102 108 114 120 150 180 240 300 360 420 480 540 600
6.5 6.5 9.8 13 16.3 19.5 23 26 29 33 39 46 49 52 59 65 72 78 85 91 98 104 111 117 124 130 163 195 260 325 390 455 520 585 650
7 7 10.5 14 17.5 21 25 28 32 35 42 49 53 56 63 70 77 84 91 98 105 112 119 126 133 140 175 210 280 350 420 490 560 630 700
7.5 7.5 11.3 15 18.8 23 26 30 34 38 45 53 56 60 68 75 83 90 98 105 113 120 128 135 143 150 188 225 300 375 450 525 600 675 750
8 8 12 16 20 24 28 32 36 40 48 56 60 64 72 80 88 96 104 112 120 128 136 144 152 160 200 240 320 400 480 560 640 720 800
8.5 8.5 12.8 17 21 26 30 34 38 43 51 60 64 68 77 85 94 102 111 119 128 136 145 153 162 170 213 255 340 425 510 595 680 765 850
9 9 13.5 18 23 27 32 36 41 45 54 63 68 72 81 90 99 108 117 126 135 144 153 162 171 180 225 270 360 450 540 630 720 810 900
10 10 15 20 25 30 35 40 45 50 60 70 75 80 90 100 110 120 130 140 150 160 170 180 190 200 250 300 400 500 600 700 800 900 1000
16.7
15.4
14.3
13.3
12.5
11.8
11.1
10
L/ha = L/100 m x 100 ÷ rowspacing (m)
Table unit = L/100 m L/100 m ‹ — › L/min Travel Speed (km/h) Travel Speed (km/h) 3.5
4
4.5
5
5.5
6
6.5
7
8
9
10
3.4 5.1 6.9 8.6 10.3 12 13.7 15.4 17.1 19 21 22 24 26 27 29 31 33 34 38 41 45 48 51 55 58 62 65 69 72 75 79 82 86 89 93 96 99
3 4.5 6 7.5 9 10.5 12 13.5 15 17 18 20 21 23 24 26 27 29 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 87
2.7 4 5.3 6.7 8 9.3 10.7 12 13.3 14.7 16 17.3 18.7 20 21 23 24 25 27 29 32 35 37 40 43 45 48 51 53 56 59 61 64 67 69 72 75 77
2.4 3.6 4.8 6 7.2 8.4 9.6 10.8 12 13.2 14.4 15.6 16.8 18 19.2 20 22 23 24 26 29 31 34 36 38 41 43 46 48 50 53 55 58 60 62 65 67 70
2.2 3.3 4.4 5.5 6.5 7.6 8.7 9.8 10.9 12 13.1 14.2 15.3 16.4 17.5 18.5 19.6 21 22 24 26 28 31 33 35 37 39 41 44 46 48 50 52 55 57 59 61 63
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58
1.8 2.8 3.7 4.6 5.5 6.5 7.4 8.3 9.2 10.2 11.1 12 12.9 13.8 14.8 15.7 16.6 17.5 18.5 20 22 24 26 28 30 31 33 35 37 39 41 42 44 46 48 50 52 54
1.7 2.6 3.4 4.3 5.1 6 6.9 7.7 8.6 9.4 10.3 11.1 12 12.9 13.7 14.6 15.4 16.3 17.1 18.9 21 22 24 26 27 29 31 33 34 36 38 39 41 43 45 46 48 50
1.5 2.3 3 3.8 4.5 5.3 6 6.8 7.5 8.3 9 9.8 10.5 11.3 12 12.8 13.5 14.3 15 16.5 18 19.5 21 23 24 26 27 29 30 32 33 35 36 38 39 41 42 44
1.3 2 2.7 3.3 4 4.7 5.3 6 6.7 7.3 8 8.7 9.3 10 10.7 11.3 12 12.7 13.3 14.7 16 17.3 18.7 20 21 23 24 25 27 28 29 31 32 33 35 36 37 39
1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6 6.6 7.2 7.8 8.4 9 9.6 10.2 10.8 11.4 12 13.2 14.4 15.6 16.8 18 19.2 20 22 23 24 25 26 28 29 30 31 32 34 35
L/100 m = L/min x 6 ÷ speed
www.croplands.com.au
60 62 64 66 68 70 72 74 76 78 80 85 90 95 100 110 120 130 140 150 160 170 180 190 200 220 240 260 280 300 350 400 450 500 600 700 800 900
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
8
9
10
360 372 384 396 408 420 432 444 456 468 480 510 540 570 600 660 720 780 840 900 960 1020 1080 1140 1200 1320 1440 1560 1680 1800 2100 2400 2700 3000 3600 4200 4800 5400
240 248 256 264 272 280 288 296 304 312 320 340 360 380 400 440 480 520 560 600 640 680 720 760 800 880 960 1040 1120 1200 1400 1600 1800 2000 2400 2800 3200 3600
180 186 192 198 204 210 216 222 228 234 240 255 270 285 300 330 360 390 420 450 480 510 540 570 600 660 720 780 840 900 1050 1200 1350 1500 1800 2100 2400 2700
144 149 154 158 163 168 173 178 182 187 192 204 216 228 240 264 288 312 336 360 384 408 432 456 480 528 576 624 672 720 840 960 1080 1200 1440 1680 1920 2160
120 124 128 132 136 140 144 148 152 156 160 170 180 190 200 220 240 260 280 300 320 340 360 380 400 440 480 520 560 600 700 800 900 1000 1200 1400 1600 1800
103 106 110 113 117 120 123 127 130 134 137 146 154 163 171 189 206 223 240 257 274 291 309 326 343 377 411 446 480 514 600 686 771 857 1029 1200 1371 1543
90 93 96 99 102 105 108 111 114 117 120 128 135 143 150 165 180 195 210 225 240 255 270 285 300 330 360 390 420 450 525 600 675 750 900 1050 1200 1350
80 83 85 88 91 93 96 99 101 104 107 113 120 127 133 147 160 173 187 200 213 227 240 253 267 293 320 347 373 400 467 533 600 667 800 933 1067 1200
72 74 77 79 82 84 86 89 91 94 96 102 108 114 120 132 144 156 168 180 192 204 216 228 240 264 288 312 336 360 420 480 540 600 720 840 960 1080
65 68 70 72 74 76 79 81 83 85 87 93 98 104 109 120 131 142 153 164 175 185 196 207 218 240 262 284 305 327 382 436 491 545 655 764 873 982
60 62 64 66 68 70 72 74 76 78 80 85 90 95 100 110 120 130 140 150 160 170 180 190 200 220 240 260 280 300 350 400 450 500 600 700 800 900
55 57 59 61 63 65 66 68 70 72 74 78 83 88 92 102 111 120 129 138 148 157 166 175 185 203 222 240 258 277 323 369 415 462 554 646 738 831
51 53 55 57 58 60 62 63 65 67 69 73 77 81 86 94 103 111 120 129 137 146 154 163 171 189 206 223 240 257 300 343 386 429 514 600 686 771
45 47 48 50 51 53 54 56 57 59 60 64 68 71 75 83 90 98 105 113 120 128 135 143 150 165 180 195 210 225 263 300 338 375 450 525 600 675
40 41 43 44 45 47 48 49 51 52 53 57 60 63 67 73 80 87 93 100 107 113 120 127 133 147 160 173 187 200 233 267 300 333 400 467 533 600
36 37 38 40 41 42 43 44 46 47 48 51 54 57 60 66 72 78 84 90 96 102 108 114 120 132 144 156 168 180 210 240 270 300 360 420 480 540
L/min = L/100 m x speed ÷ 6
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
3
Total Flow (L/min) ‹—› Single Nozzle Flow (L/min) To obtain single nozzle flow rates simply divide the Total Flow/min by the numbers of nozzles per row. For example, having 24 nozzles per row and spraying 36 L/min requires a nozzle size that delivers a flowrate1.5 L/min. Formula: Total output L/min = no of nozzles x single nozzle output • Single nozzle output = Total output ÷ no of nozzles
ALBUZ ATR Hollow Cone Flowrate chart
4 Bar
PRESSURE
L/min White
Lilac
Brown
Yellow
Orange
Red
Grey
Green
Black
5
0.27
0.36
0.48
0.73
0.99
1.38
1.5
1.78
2
Blue 2.45
6
0.29
0.39
0.52
0.8
1.08
1.51
1.63
1.94
2.18
2.67
7
0.32
0.42
0.56
0.86
1.17
1.62
1.76
2.09
2.35
2.87
8
0.34
0.45
0.6
0.92
1.24
1.73
1.87
2.22
2.5
3.06 3.24
9
0.36
0.48
0.64
0.97
1.32
1.83
1.98
2.35
2.64
10
0.38
0.5
0.67
1.03
1.39
1.92
2.08
2.47
2.78
3.4
11
0.39
0.52
0.7
1.07
1.45
2.01
2.17
2.58
2.9
3.56
12
0.41
0.55
0.73
1.12
1.51
2.09
2.26
2.69
3.03
3.71
13
0.43
0.57
0.76
1.17
1.57
2.17
2.35
2.79
3.14
3.85
14
0.44
0.59
0.79
1.21
1.63
2.25
2.43
2.89
3.26
3.99
15
0.46
0.61
0.81
1.25
1.69
2.33
2.51
2.99
3.36
4.12
16
0.47
0.63
0.84
1.29
1.74
2.4
2.59
3.08
3.47
4.25
17
0.48
0.64
0.86
1.33
1.79
2.47
2.67
3.17
3.57
4.37
18
0.5
0.66
0.89
1.37
1.84
2.54
2.74
3.25
3.67
4.49
19
0.51
0.68
0.91
1.4
1.89
2.6
2.81
3.34
3.76
4.61
20
0.52
0.7
0.93
1.44
1.94
2.67
2.88
3.42
3.85
4.72
ALBUZ Equivalent*
TVI
Purple 80–0050
Orange 80–01
Green 80–015
Yellow 80–02
Lilac 80–025
Blue 80–03
Blue 80–03
Red 80–04
Red 80–04
TeeJet Equivalent*
TX TXB80
TX-VK3
TX-VK4
TX-VK6
TX-VK8
TX-VK12
TX-VK18
TX-VK18
TX-VK18
TX-VK26
TX-VK26
TXB-050VK
TXB-067VK
TXB-01VK
TXB-015VK
TXB-02VK
TXB-03VK
TXB-03VK
TXB-03VK
TXB-04VK
TXB-04VK
Pink 80–0075
Note: Colours in table represent actual nozzle colour. ALBUZ TVI and TeeJet TXB80 nozzle range are ISO colour coded. Nozzles with the same colour have the same output. The ALBUZ ATR and TeeJet TX range are NOT ISO colour coded. Their nozzle colour is not related to a specific output.
Tree crop and vine nozzles NOZZLE
TYPE AND DESCRIPTION
ALBUZ ATR
• Hollow cone, 80° • 5–20 bar (optimum 10–15 bar) • Pink ceramic
GENERAL SPRAY SAMPLE ORDER SIZE RANGE, MATERIAL QUALITY FOR TYPE CODE SPRAY ANGLE
VF F
AZ-ATR-**- 80C
• **03 to 28 sizes • Ceramic • 80° spray angle (60° spray angle, some sizes)
$ (EX. GST) $ (INC. GST)
9.82
10.80
PROD. CAT.
Z
Air-Induction Nozzles for Horticulture NOZZLE
TYPE AND DESCRIPTION
ALBUZ TVI
• TVI • Hollow cone 80°, high pressure air-induction • Drift reducing • 5–20 bar (optimum 10–16 bar)
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
GENERAL SPRAY SAMPLE ORDER SIZE RANGE, MATERIAL QUALITY FOR TYPE CODE SPRAY ANGLE
C
AZ-TVI-02-80C
• 0050 to 05 sizes • Pink ceramic (3 components) • 80°
$ (EX. GST) $ (INC. GST)
19.95
21.95
Optima BUYERS’ GUIDE – JANUARY 2014
PROD. CAT.
Z
10 5
Section 4
Nozzles
Nozzles – Discs and Cores NOZZLE
TYPE AND DESCRIPTION Disc and Core Jets: • Full and hollow cone spray patterns • Medium to fine droplets for use in air assisted situations • 5 to 20 bar recommended range
ORDER CODE
Type
SIZE RANGE, MATERIAL
$ (EX. GST)
$ (INC. GST) PROD. CAT.
AZ-AD4
Disc
• 1 to 7 • Pink ceramic
5.09
5.60
Z
AZ-AC35
Core
• 13 to 56 • Pink ceramic
7.91
8.70
Z
FULL CONE
HOLLOW CONE
Disc and Core ALBUZ Ceramic – Flowrates
10 6
Disc SIZE
Core SIZE
Orifices Diameter
AD 1
AC 13
AD 2
AC 13
L/min
Angles
3 bar
4 bar
5 bar
6 bar
10 bar
15 bar
20 bar
10 bar
0.910
0.28
0.29
0.32
0.34
0.43
0.51
0.57
66°
20 bar 68°
1.180
0.32
0.37
0.40
0.42
0.52
0.63
0.67
74°
75°
AD 3
AC 13
1.385
0.36
0.41
0.43
0.48
0.60
0.71
0.74
77°
78°
AD 4
AC 13
1.810
0.47
0.52
0.58
0.60
0.74
0.91
1.00
84°
85°
AD 1
AC 23
0.910
0.28
0.30
0.35
0.38
0.48
0.55
0.61
63°
65°
AD 2
AC 23
1.180
0.39
0.48
0.50
0.56
0.71
0.83
0.93
72°
72°
AD 3
AC 23
1.385
0.47
0.52
0.58
0.64
0.78
0.95
1.04
77°
77°
AD 4
AC 23
1.810
0.59
0.71
0.76
0.81
1.04
1.26
1.41
88°
87°
AD 5
AC 23
2.310
0.71
0.82
0.90
0.99
1.27
1.50
1.71
96°
95°
AD 6
AC 23
2.770
0.83
0.97
1.04
1.13
1.45
1.78
2.01
100°
99°
AD 1
AC 25
0.910
0.40
0.45
0.50
0.55
0.69
0.83
0.95
49°
51°
AD 2
AC 25
1.180
0.63
0.71
0.79
0.88
1.08
1.34
1.53
61°
61°
AD 3
AC 25
1.385
0.75
0.86
0.94
1.02
1.30
1.58
1.79
69°
69°
AD 4
AC 25
1.810
1.14
1.30
1.44
1.59
2.01
2.45
2.79
82°
82°
AD 5
AC 25
2.310
1.36
1.56
1.73
1.91
2.42
2.96
3.35
85°
84°
AD 6
AC 25
2.770
1.74
2.01
2.23
2.47
3.16
3.83
4.43
89°
88°
AD 7
AC 25
3.230
2.05
2.34
2.63
2.86
3.85
4.66
5.10
92°
91°
AD 1
AC 45
0.910
0.49
0.55
0.61
0.67
0.84
1.01
1.15
39°
40°
AD 2
AC 45
1.180
0.79
0.93
1.01
1.13
1.41
1.74
1.97
58°
58°
AD 3
AC 45
1.385
0.91
1.04
1.19
1.27
1.84
2.01
2.31
62°
63°
AD 4
AC 45
1.810
1.42
1.60
1.80
1.98
2.53
3.08
3.54
73°
72°
AD 5
AC 45
2.310
1.78
2.05
2.31
2.51
3.20
3.91
4.54
76°
75°
AD 6
AC 45
2.770
2.29
2.68
2.99
3.28
4.28
5.25
6.10
80°
79°
AD 7
AC 45
3.230
2.68
3.13
3.50
3.92
5.02
6.20
7.22
86°
85°
AD 1
AC 46
0.910
0.57
0.66
0.74
0.81
1.04
1.26
1.45
17°
17°
AD 2
AC 46
1.180
1.07
1.23
1.33
1.48
1.86
2.25
2.53
20°
18°
AD 3
AC 46
1.385
1.26
1.45
1.62
1.80
2.27
2.76
3.20
23°
21°
AD 4
AC 46
1.810
2.21
2.53
2.81
3.11
3.98
4.85
5.86
32°
31°
AD 5
AC 46
2.310
3.04
3.50
3.96
4.41
5.58
6.83
7.93
41°
40°
AD 6
AC 46
2.770
4.34
5.02
5.69
6.11
8.04
9.87
11.39
49°
47°
AD 7
AC 46
3.230
5.49
6.40
7.10
7.84
10.16
12.43
14.33
55°
53°
AD 1
AC 31
0.910
–
–
–
–
0.92
1.10
1.25
39°
39°
AD 2
AC 31
1.180
–
–
–
–
1.41
1.69
1.92
87°
95°
1.80
AD 3
AC 31
1.385
–
–
–
–
1.50
AD 1
AC 35
0.910
–
–
–
–
0.92
2.05
65°
62°
1.25
34°
40°
AD 2
AC 35
1.180
–
–
–
–
1.58
1.90
2.16
39°
39°
AD 3
AC 35
1.385
–
–
–
–
2.20
2.64
3.00
44°
42°
AD 4
AC 35
1.810
–
–
–
–
3.58
4.30
4.89
77°
72°
AD 5
AC 35
2.310
2.60
3.00
3.30
3.60
4.51
5.41
6.16
37°
34°
AD 2
AC 56
1.180
0.98
1.10
1.20
1.40
1.52
1.82
2.07
21°
20°
AD 3
AC 56
1.385
1.30
1.60
1.70
1.90
2.05
2.46
2.80
28°
32°
AD 4
AC 56
1.810
2.20
2.50
2.80
3.10
3.52
4.23
4.81
35°
38°
AD 5
AC 56
2.310
3.00
3.50
3.90
4.30
5.96
7.15
8.14
43°
40°
AD 6
AC 56
2.770
4.50
5.30
5.90
6.50
8.78
10.54
12.00
56°
49°
AD 7
AC 56
3.230
6.00
6.90
7.70
8.50
11.80
14.17
16.20
68°
64°
www.croplands.com.au
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Nozzles Section 4
The appearance of a spray cloud interacting with the canopy does not provide accurate indications about coverage achieved in the canopy. More often than not the perception of the human eye is not even close to the real coverage achieved. For example, the plumes of high volume applications will generally look reassuringly better than the hardly visible plumes from low volume applications. Yet, coverage with the lower volume is often equivalent or even better. Hard to cover surfaces may not allow deposition and what looks superficially like an effective plume may not translate into actual coverage. Therefore, for any realistic assessment of spray coverage it becomes imperative to create some unbiased standard with the help of spray indicators!
Water Sensitive Paper Water sensitive paper has the advantage that it is very easy to handle (but watch out for moisture) and store (used and unused) which make it an ideal tool for documentation. It can be assessed straight after the application and like clay, it is excellent to be incorporated into the work flow of the set-up. It provides only a small snapshot of the canopy target and great care needs to be taken to produce a representative standard when placing the papers into the canopy. As a rule of thumb, if three out of ten papers show inadequate coverage the set-up needs improvement.
Clay Markers Their main use pattern is to protect fruits and leaves from sun burn. By far the most visible residues are produced by Surround which makes it an excellent product for the assessment of coverage. Spraying with Surround provides the advantage to see coverage over the entire canopy as a whole as well as in detail. Uneven banding or shading in the canopy can be picked up very effectively. Surround is the best method to demonstrate excessive run-off. An assessment can be carried out soon after application, once the clay marker has dried. The sprayer can be modified according to shortcomings. This continuous workflow makes working on the set-up very effective. A good visual spray indicator rate is 1.25kg/100 litre Dilute Volume. If a concentrate spray volume is used the x-factor rules must be applied.
Fluorescent Dye The glow of fluorescent dye in the light of a fluorescent torch under dark conditions can be quite spectacular. Even the tiniest droplets show up. The observer needs a fluorescent torch. Assessments are normally carried out in the night which makes it difficult to change setups on the go. Alternatively, leaves and fruits can be picked after application and observed in a darkroom during the day.
ORDER CODE
DESCRIPTION
L-M1111
1 litre Fluoro Dye
118.18
130.00
X
L-M1115
5 litre Fluoro Dye
408.18
449.00
X
20301-1
Water sensitive paper 76 x 26mm (3” x 1”) pack 50
55.08
60.59
Z
20301-2
Water sensitive paper 76 x 52mm (3” x 2”) pack 50
91.47
100.62
Z
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Optima BUYERS’ GUIDE – JANUARY 2014
107
Section 4
Nozzle Packs
Packs of Nozzles, Caps and nozzle filters
Purchasing nozzles in quantities can make you some savings and provide ideal opportunities for display. Our most popular packs are listed below
10 8
ORDER CODE
DESCRIPTION (STANDARD MODELS)
PR10-TDAM
AirMix® nozzles, size 015 – pack of 10
85.00
93.50
Z
PR11-TDAM
AirMix® nozzles, size 02 – pack of 10
85.00
93.50
Z
PR12-TDAM
AirMix® nozzles, size 03 – pack of 10
85.00
93.50
Z
PR13-TDAM
AirMix® nozzles, size 04 – pack of 10
85.00
93.50
Z
PR14-TDAM
AirMix® nozzles, size 025 – pack of 10
85.00
93.50
Z
PR10-TDAM100
AirMix® nozzles, size 015 – pack of 10
795.00
874.50
Z
PR11-TDAM100
AirMix® nozzles, size 02 – pack of 10
795.00
874.50
Z
PR12-TDAM100
AirMix® nozzles, size 03 – pack of 10
795.00
874.50
Z
PR13-TDAM100
AirMix® nozzles, size 04 – pack of 10
795.00
874.50
Z
PR14-TDAM100
AirMix® nozzles, size 025 – pack of 10
795.00
874.50
Z
PR20-1
25612 Nozzle caps with seals – Black – pack of 10
17.75
19.52
Z
PR20-3
25612 Nozzle caps with seals – Red – pack of 10
17.75
19.52
Z
PR20-4
25612 Nozzle caps with seals – Blue – pack of 10
17.75
19.52
Z
PR20-5
25612 Nozzle caps with seals – Green – pack of 10
17.75
19.52
Z
PR20-6
25612 Nozzle caps with seals – Yellow – pack of 10
17.75
19.52
Z
PR20-10
25612 Nozzle caps with seals – Lilac – pack of 10
17.75
19.52
Z
PR20H-1
23306H Nozzle caps with seals to suit Hardi nozzle bodies – Black – pack of 10
147.84
162.62
Z
PRTTI-015
TeeJet Turbo Teejet AI nozzles size 015 – pack of 10
108.20
119.02
Z
PRTTI-02
TeeJet Turbo Teejet AI nozzles size 02 – pack of 10
108.20
119.02
Z
PRTTI-025
TeeJet Turbo Teejet AI nozzles size 025 – pack of 10
108.20
119.02
Z
PRTTI-03
TeeJet Turbo Teejet AI nozzles size 03 – pack of 10
108.20
119.02
Z
PRTTI-04
TeeJet Turbo Teejet AI nozzles size 04 – pack of 10
108.20
119.02
Z
PRTT-02
Turbo TeeJet nozzles size 02 – pack of 10
94.05
103.46
Z
PRTT-025
Turbo TeeJet nozzles size 025 – pack of 10
94.05
103.46
Z
PRTT-03
Turbo TeeJet nozzles size 03 – pack of 10
94.05
103.46
Z
PR10
XR TeeJet nozzles size 015 – pack of 10
46.40
51.04
Z
PR11
XR TeeJet nozzles size 02 – pack of 10
46.40
51.04
Z
PR12
XR TeeJet nozzles size 03 – pack of 10
46.40
51.04
Z
PR13
XR TeeJet nozzles size 04 – pack of 10
46.40
51.04
Z
PR14
XR TeeJet nozzles size 025 – pack of 10
46.40
51.04
Z
PR15
XR TeeJet nozzles size 05 – pack of 10
46.40
51.04
Z
www.croplands.com.au
$ (EX. GST)
$ (INC. GST) PROD. CAT.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 4
Spraying Equipment Specialists Croplands manufacture and import quality spray equipment, components and accessories. UNDERSTANDING SPRAYERS
Croplands has been building sprayers since 1972. After operating for 40 years in the Australian and New Zealand environments we understand what the pressing problems are; before, during and after application. Our sprayers are built accordingly. We listen to farmers and produce cost effective solutions to suit their needs.
SIMPLE, RELIABLE AND DURABLE Our machinery is built to high quality standards. Robust design and generous dimensions result in unmatched durability. Working with feedback from armers and operators, we develop sprayers that provide efficiency with a simple approach. To name just one example, our evolved central control areas make filling, flushing, chemical mixing and induction an easy process.
THE APPLICATION SPECIALIST At Croplands we believe it is not good enough to simply sell a piece of machinery. We believe it is important to give advice to growers on how to achieve the best possible outcome with their unit. How many other manufacturers can confidently give tailored recommendations on nozzle selection?
SUPPORT AND SERVICE Our service centres are staffed by experienced and internationally trained technicians who understand what makes your sprayer tick. Croplands’ dealer network is trained to provide the very best local support. With dealers and warehouses located around the country spare parts and accessories are always available and close by.
Section 4
Terms and conditions
1. DEFINITION ‘Seller’ means Croplands Equipment Pty Ltd. ‘Buyer’ means the addressee specified on documents or invoices subject to this contract issued by the Seller. ‘Goods’ means any item of whatsoever nature which is sold by the Seller. ‘Terms’ means these Terms and Conditions of Sale. All quotations are made and all orders are accepted subject to the following conditions. No other conditions contained in an order of the Buyer or otherwise shall form part of the contract or any variation thereof unless expressly accepted by the Seller in writing. The placement of an order with the Seller by the Buyer constitutes an unqualified acceptance and agreement of these Terms by the Buyer. Buyer and Seller agree that if these terms conflict with any other document, agreement or arrangement, these Terms shall prevail to the extent of the inconsistency. 2. BUYER’S STATUTORY RIGHTS These conditions of sale shall not exclude, limit, restrict or modify the rights, entitlements and remedies conferred upon the Buyer or the liabilities imposed upon the Seller, by any condition or warranty implied, by the commonwealth, state or territory act or ordinance, rendering void or prohibiting such exclusion, limitation, restriction or modification. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 3. WARRANTIES Subject to Clause 2 above, (a) The Seller warrants that the goods supplied shall be of merchantable quality. All goods are supplied subject to this warranty only and any liability arising out of or in respect of the supply, resupply, use or reuse whether singly or otherwise of these goods, whatsoever arising and whether for consequential loss or otherwise and including any liability the Seller may otherwise have had by virtue of any representation, warranty, condition or term whether express or implied by law is hereby excluded to the extent permitted under the Competition and Consumer Act 2010. (b) Any liability incurred by the Seller to the Buyer is limited to the replacement or repair of the goods or (at the option of the Seller) refund of the price paid by the Buyer, for a period of 12 months from the date of sale, provided the goods have not been damaged through misuse or handling and in particular does not extend to consequential loss. (c) To make a claim under this warranty, the Buyer can contact the Seller through the Dealer portal website www.croplands.com.au or call 1300 650 724, or contact their Territory Manager listed on the www.croplands.com.au/pages/contact.html website. The Buyer should specify the full particulars of such claim and wherever possible return a sufficient part of the Goods to enable a proper examination by the Seller. 4. ADVICE Subject to Clause 2, any advice, recommendation, information, assistance or service provided by the Seller in relation to Goods sold or manufactured by it or their use or application is given in good faith and is believed by Seller to be appropriate and reliable and is provided without liability or responsibility on the part of the Seller. This clause also applies to product specifications and analyses which may from time to time be required to be provided to the Buyer from the Seller. 5. DELIVERY The Seller will make all reasonable efforts to have the goods delivered to the Buyer on the date agreed between the parties (‘Delivery Date’) but the Seller shall be under no liability whatsoever should delivery not be made on this date. Unless otherwise specified, delivery of all Goods shall be made at the nearest convenient unloading point (either road or rail) to the Buyer’s address and the Buyer shall be responsible for unloading vehicles or containers and transportation to factory or store.
110
6. DAMAGE IN TRANSIT All Goods shall be examined by the Buyer on delivery. The Seller shall not be liable for claims in respect of shortage or damage in transit unless the carrier and the Seller are notified in writing within 7 days of delivery – or in the case of non delivery, notice being given in writing within 7 days of notice of despatch of the goods from the works of the Seller or its subcontractors. 7. RISK The assessment of the suitability of the goods offered by the Seller for use by the Buyer, either in a process or incorporation in a product, is the sole responsibility of the Buyer irrespective of any information verbal or written given to the Buyer by the Seller. The Buyer assumes all risks and liabilities for consequences arising from the use of Goods from the Delivery Date, whether singly or in combination with other products and indemnifies the Seller in respect of any such use. 8. RESERVATION OF TITLE (a) Property in the Goods shall remain with the Seller and the Seller reserves the right to dispose of the Goods until such time as: (i) full payments made for all amounts owing by the Buyer to the Seller so that the Buyer’s total indebtedness to the Seller under these Conditions of Sale is discharged; or (ii) the Buyer sells the goods to his customers in the ordinary course of business. (b) lf the Buyer fails to pay any amount of the Buyers total indebtedness to the Seller under these Conditions of Sale when it is due to the Seller or, in event of default as specified in this subclause occurs, the Seller may without notice and without prejudice to any of its other rights and remedies recover and/or re-sell the Goods or any of them and may enter upon the Buyers premises by its servants or agents for that purpose. (c) The Buyer acknowledges that until his total indebtedness under these Conditions of Sale to the Seller is discharged, the Buyer holds the Goods as bailee of the Seller and that a fiduciary relationship exists between them. (d) ln the event of sale of the Goods to its customers, the Buyer in its position as a fiduciary shall account to the Seller for the proceeds of the sale (unless and until the Buyer’s total indebtedness to the Seller under these Terms is discharged). 9. PERSONAL PROPERTIES SECURITY ACT 2009 (PPSA) (a) In this Clause 9, unless otherwise defined in these Terms, capitalised expressions have the meaning given to them in the PPSA. (b) Buyer acknowledges and agrees that by entering into a contract of sale under these Terms, Buyer grants a Security Interest to the Supplier in the Goods and any proceeds of sale in respect to those Goods and also consents to the Seller registering any one or more Financing Statements or Financing Change Statements in respect to any such Security Interest created by or contemplated by these Terms. (c) Buyer and Seller agree for the purposes of satisfying s20(1)(iii) of the PPSA, that the description of Goods as shown on any invoice from the Seller is the subject of each and any Security Interest created under these terms and such and every invoice is incorporated into these Terms. (d) Buyer agrees that it is the Grantor and Seller is the holder of a Purchase Money Security Interest (PMSI) by virtue of these Terms or the PPSA. (e) Buyer agrees that the following provisions of the PPSA will not apply to these Terms: Sections 95, 96, 125, 129, 130, 132(3)(d), 132(4), 135, 142 and 143. (f) Unless otherwise agreed in writing with the Seller, the Buyer waives its rights to receive a verification statement in accordance with s157 of the PPSA. (g) For the purposes of s275(6) of the PPSA, Buyer and Seller agree that neither party will, or is entitled to, disclose information of the kind specified in s275(1) of the PPSA. (h) Buyer agrees with the Seller that it will not enter into any agreement or arrangement which permits any other person to register any Security Interest in respect to unpaid Goods, proceeds of sale of unpaid Goods or any accounts owed in respect of the
www.croplands.com.au
unpaid Goods without the suppliers consent. (i) Buyer agrees to give Seller at least 10 days prior written notice before changing any of its corporate details, such as its name, ABN or ACN, or principle place of business. (j) Buyer agrees it shall unconditionally ratify any actions taken by the Seller under this Clause 9. (k) Buyer agrees to reimburse Seller for all costs and/ or expenses incurred or payable by the Seller in relation to registering, maintaining or releasing any Financing Statement or Financing Change Statement under these terms. (l) This Clause 9 will survive the termination of the contract for sale and purchase of Goods between the Buyer and Seller to the extent permitted by law. 10. PRICE The price shall be the price ruling at the Delivery Date unless otherwise agreed in writing. Any price indications or price lists are subject to alteration to price ruling at the Delivery Date. 11. FORCEMAJEURE Deliveries may be totally or partially suspended by the Seller during any period in which the Seller may be prevented or hindered from making delivery through any circumstances outside its reasonable control, including but not limited to strikes, lockouts, raw material shortages, accidents or breakdowns of plant or machinery. The Seller shall not be under any liability in respect of such suspension and in particular the Seller shall be under no obligation to deliver at any future date any Goods not delivered during the period of suspension. 12. PAYMENT AND DEFAULT Unless otherwise agreed expressly in writing the terms of payment shall be 30 days, following the end of the month of delivery. If the Buyer makes default in any payment or commits any act of bankruptcy or being an incorporated company, passes a resolution for winding up (except for the purpose of reconstruction) or a petition is presented for its winding up, the Seller may without prejudice to its own rights either suspend further deliveries, require payment in advance for all such deliveries or terminate any contract forthwith by written notice to the Buyer. Where the payment is to be made from places outside of Australia, the normal method of payment shall be a confirmed irrevocable bank letter of credit designated in Australian Dollars from a bank approved by the Seller guaranteeing full settlement to an agreed bank payable on presentation of the documents. 13. DEBT COLLECTION COST If the Buyer makes default in payment, which necessitates debt collection costs to be incurred by the Seller, these debt collection costs will be passed onto the Buyer, and shall be recouped by the Seller at such time as the recovery of outstanding debt takes place. 14. FUTURE DEALING Unless otherwise agreed to in writing by the Seller and not withstanding any terms appearing in documentation provided by or on behalf of the Buyer the terms appearing herein shall be incorporated by implication into all agreements by the Seller to supply the Buyer with goods. 15. CANCELLATION Cancellation will only be accepted by the Seller on condition that all costs and expenses and all loss of profits and other loss or damage sustained by the Seller (as to which the certificate of the auditor of the Seller shall be conclusive) will be reimbursed by the Buyer to the Seller forthwith. 16. AUSTRALIAN LAW This contract shall be construed in accordance with Australian law and shall be subject to the jurisdiction of the Australian courts. 17. NOTICES Any notice given to the Buyer shall be deemed to be given upon its being posted or sent by facsimile/email to the address of the Buyer set out in documents and invoices. 18. RESERVATION OF RIGHTS Notwithstanding anything else in these Terms, any exercise or attempted exercise, of any enforcement right by the Seller under these Terms does not prejudice or limit, in any respect, any other rights or remedies of the Seller arising at law or in equity.
Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Section 4
Freight policy
• The following tables detail freight on items listed in the 2014 Optima Buyers’ Guide. • These prices may change at any time without notice. These freight charges will apply unless items are ordered that qualify to be included in a stock order. • These charges apply Australia-wide. Goods can be sent by your choice of carrier and/or arranged for pick-up, or sent freight forward if we are advised at the time of order.
Table 1: Wholegoods – sent by road freight as individual items Note: most “X” and some “Y” product category items are only suitable for road freight. All freight prices include any applicable fuel surcharges and remote area surcharges ITEM
FREIGHT $ (ex. GST)
All control manifolds and I-E2021,2032, 2052, I-E4020 and 4021 50.00 All controller kits and GPS units (Mtsmate-Arag3 etc) 40.00 All hose reels and 100 metre rolls hose 50.00 All Swissmex booms, 30 metre rolls spray hose 25.00 AR pumps with gearboxes – models AR503, AR813. All centrifugal 45.00 pumps models AR Pump models AR30, AR70, AR80, AR252 and AR503. Free into FIS store on TNT road, excludes motorised and gearbox models. AR motorised pumps 115, 70 and 135 70.00 AR pumps models AR140, AR160, AR185, AR250, AR280, 70.00 BHA140, BHS170, BHS200 AR pumps models AR330 and AR410 115.00 Foam markers 50.00 Kasco respirators 25.00 L-H9003 and 9005 measuring jugs, 10 each 25.00 L-H9003 and 9005 measuring jugs, up to 5 each 20.00 L-H9025 25 litre buckets (each) 25.00 L-H9025 25 litre buckets (x 3) 45.00 L-H9351A 60 litre mixer 90.00 L-H9353A, L-9353 60 litre mixers with trolley; 25.00 L-H9351 with L-H9355A 115.00 L-M9020 20 litre foam (each) 25.00 L-M9020 20 litre foam (x 10) 100.00 LA1000, LA1000/80 400.00 LA1000/80/10F 450.00 LA1000/MHL12 or MHL15 1,000.00–1,450.00 MEC1100/1300/1600 with boom attached 1,450.00–1,750.00 LA500, LA700, LA500/80, LA700/80, LA500/30 150.00 LA500/252/4B, LA500/80/6B, LA500/30/MVB4-4 250.00 LA500/GEX or LA700/GEX 400.00 LA700/70/8F 400.00 MA10 and MA12 booms, GEX series booms 150.00 MHL 12 and 15 metres booms; BDU18 boom only 400.00 MC6, MBX06-1, MSC-2, MVB4-4 and MVB5-5 booms 70.00 MF06 and MF08 70.00 MF10 and MF12 90.00 Motorised pumps – all models, and electric drive pumps 75.00 MSO, MSE, MSC, MB02, MBX03-1, MBX04-1 booms 40.00 MW02 70.00 Pony trailed sprayer/trailed firefighter and 1,200.00 US1100/1500 tray-mount sprayers All RetraSpray complete units with tank 300.00 RetraSpray reels and Diesel reels 140.00 SW319 and SW320 x 1 unit 20.00 SW319 and SW320 x 10 units 100.00 SW503, SW015, SW189C, ASBBS-16, ASBBS-10 x 1 unit 25.00 SW503, SW015, SW189C, ASBBS-16, ASBBS-10 x 10 units 130.00 UA300 trailing sprayer (all models) and UA200/300 motorised 350.00 nursery sprayers UM70 and UM70/13, UM70/3B and 4B 80.00 US200 and US200/15, UW50/2B and Baler applicators 150.00 US30A, ASAT-30M3 Trolley sprayer, Apex Mistblower 40.00 US400, US400/15, US400/FF, US500/30/HRTG and BSM500/20 300.00 US60, US100A and US100/15 60.00 US800, US800/15, US800/FF 360.00 US1100, US1100D 450.00 All tanks – freight will be quoted at time of order unless required POA freight forward Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.
Table 2: Spare Parts, Components and Accessories – sent by airfreight/Australia Post for daily orders Items such as: • spare parts • nozzles and nozzle caps • Flojet pumps • regulating valves • ball valves • solenoids • spray guns • respirators
• • • • • • • •
gloves and suits boom components filters gauges tank fittings camlocks brass and poly fittings most “Z” and some “Y” products are suitable for airfreight.
Airfreight ITEM
Notes
$ (ex. GST)
Parts, accessories, components
1kg bag
14.00
Parts, accessories, components
3kg bag
20.00
Parts, accessories, components
5kg bag
30.00
Australia Post Croplands will no longer send orders by standard Australia Post due to the frequency of items being lost in transit (non-traceable). If method of dispatch is requested as post, Croplands will only use a signed receipt post option, priced as follows: ITEM
Notes
$ (ex. GST)
Parts, accessories, components
<1kg bag
7.50
Parts, accessories, components
1kg–3kg bag
15.00
Table 3: Stock Orders ITEM
Notes
Cost
Parts, accessories, components with a dealer nett value of $2,000.00 + GST*
• Mark your order clearly as a “STOCK ORDER” • Stock orders can take up to 5 working days to pack and dispatch • Minimum of 15 individual lines must be ordered
F.I.S.
*All items marked in BLUE in Table 1 qualify for stock orders. All items marked in ORANGE in Table 1 do not qualify for stock orders. All items marked GREEN in Table 1 will be FIS. FIS is strictly available with TNT road delivery only. Croplands tanks do not qualify for stock orders.
Optima BUYERS’ GUIDE – JANUARY 2014
111
NATIONWIDE DEALER LISTING CROPLANDS SALES REPRESENTATIVES QLD Rob Graham������������ 0409 597 462 South QLD/North NSW Jeremy Jones������������� 0407 485 569 North NSW/TAS/NT Dave Farmer��������������0427 651 971 South NSW/Sunraysia David Hamilton����������0427 975 072 VIC Matthew Plunkett�������� 0417 832 784 SA Luke Wormald����������� 0419 991 534 WA Gavin Merritt�������������0448 022 172 WA John Griffiths�������������� 0407 132 746 General Manager, Australasia Sean Mulvaney����������0409 911 544 Sales Manager, Australasia Anthony Maley��������� 0409 899 491 Customer Support Manager, Australasia Gary Armour������������� 0409 911 950 Nozzle Specialist, Australasia Jorg Kitt������������������� 0429 939 403 Your Croplands dealer
Contact your local dealer or Croplands Australia Freecall���������� 1800 999 162 Freefax���������� 1800 623 778
[email protected] Croplands Head Office 50 Cavan Road Dry Creek SA 5094 Tel�������������������������� 08 8359 9300 Fax�������������������������� 08 8349 6175 Technical Service��������1300 650 724
S & J Morrison
02 6235 5835
New south wales Armidale Bathurst Bowral Cooma Corindi Corowa Cowra Dubbo Finley Forbes Goulburn Griffith Griffith Gunnedah Hexham Inverell Lake Cargelligo Moree Narrabri Orange Parkes Port Macquarie Scone South Lismore Stuart’s Point Temora Tottenham Tumut Wagga Wagga Walgett Walla Walla Warren West Wyalong Young
Armidale Pumps & Irrigation On-Trac Ag Total Farm & Garden Equipment Southern Service Centre NFS-Ag O’Connors Cowra Machinery Centre Geronimo Farm Machinery Agtrade Machinery Forbes Machinery Centre Goulburn Farm Machinery Codemo Machinery Services Guidolin Agrimac NFS-Ag Kentan Machinery Inverell Pumps & Sprays Codemo Machinery Services Black Truck & Ag NFS-Ag On-Trac Ag McPherson’s Parts & Service Agri Maintenance Services Kentan Machinery Northern Rivers New Holland Norco Temora Truck & Tractor Service Western Farm Machinery Tumut Farm Machinery Norwood Farm Machinery Walgett Tyre & Machinery Service CJ & LH Wiesner Western Farm Machinery Gallaghers Machinery Carruthers Machinery
02 6771 1645 02 6332 5655 02 4861 2210 02 6452 1605 0409 042 286 02 60331 666 02 6342 5555 02 6826 8600 03 5883 4560 02 6852 3211 02 4821 4148 02 6962 6244 02 6964 3400 02 6742 7771 02 4964 8275 02 6722 4088 02 6898 2099 02 6752 2277 02 6741 7771 02 6362 5566 02 6862 3888 0429 095 459 02 6545 2155 02 6626 0498 02 6569 0955 02 6977 1098 02 6892 4078 02 6947 6422 02 6921 2148 02 6828 1500 02 6029 2151 02 6847 3422 02 6972 1057 02 6382 7233
NORTHERN TERRITORY Humpto Doo Winnellie
HD Pump Sales & Service HD Pump Sales & Service
08 8988 1254 08 8947 1008
Tableland Pumps & Pipes A & B Rural Coochin Creek Co-Operative Lindsay Rural Suncoast Rural & Water Black Truck & Ag Dalby Mower Supplies Bartec Rural Services Milne Bros Agricultural Requirements Lockyer Farm Machinery Black Truck & Ag NQ Rural Supplies Ingham Farm Centre GF Rural Supplies South East Qld Tractor Sales & Service First Avenue Machinery Sales Mackay Rural TGT Agriculture Think Water Farm HQ Milne Bros. Equipment Pumps N Solar Farm HQ Lindsay Rural Vedelago mechanical repairs Toowoomba Spray Shop Black Truck Sales GF Rural Supplies
07 4091 2277 07 4783 4488 07 5494 6219 07 4150 0500 07 5432 4511 07 4669 8988 07 4669 6885 07 4785 2322 07 4982 4824 07 5462 1177 07 5462 1888 07 4671 3512 07 4056 1977 07 4776 1477 07 4061 1066
QUEENSLAND Atherton Ayr Beerwah Bundaberg Caboolture Dalby Dalby Bowen Emerald Gatton Gatton Goondiwindi Gordonvale Ingham Innisfail Kalbar Kingaroy Mackay Mareeba Mareeba Proserpine Rockhampton Roma Sarina Stanthorpe Thulimbah Toowoomba Toowoomba Tully
07 5463 5957 07 4162 1246 07 4952 2466 07 4092 2888 07 4092 7788 07 4945 2733 07 4927 1888 07 4622 4528 07 4956 2139 07 4681 0066 07 4685 2200 07 4634 4000 07 4631 4200 07 4068 1002
SOUTH AUSTRALIA Adelaide Berri Booleroo Centre Bordertown Cleve Cummins Gawler East Gepps Cross Kadina Kimba Littlehampton McLaren Vale Millicent Murray Bridge Murray Bridge
Adelaide Spray Shop Growers Services Flinders Machinery O’Connors Ramsey Bros Ramsey Bros Tundarri Sales & Service Kubpower Measday’s Services Ramsey Bros Central Hills Machinery DJ’s Growers Services Millicent Farm Supplies Daish Irrigation Ramsey Bros
1800 777 090 08 8582 1500 08 8667 2002 08 8752 1311 08 8628 2100 08 8676 2103 08 8522 2188 08 8139 7200 08 8828 0200 08 8627 2371 08 8391 1414 08 8323 8339 08 8733 4966 08 8532 2711 08 8531 2244
Naracoorte Nuriootpa Pinnaroo Renmark Roseworthy Saddleworth Strathalbyn Virginia Woodside Wudinna
Kubpower Farmer Johns Ronco Motors Growers Services Gawler Farm Machinery AW Vater & Co Daish Irrigation CRT Complete Ag DJ’s Growers Services Ramsey Bros
08 8762 0123 08 8562 1311 08 8577 8129 08 8586 6714 08 8524 8131 08 8847 4020 08 8536 4422 08 8380 9400 08 8389 7022 08 8680 2200
Southern Machinery T P Jones & Co T P Jones & Co
03 6229 1133 03 6391 3140 03 6343 1666
TASMANIA Kingston Longford Youngtown
VICTORIA Bairnsdale Ballarat Bendigo
Brown & Wigg Windmill Ag Statewide Irrigation and Rural Supplies Birchip O’Connors Castlemaine Statewide Irrigation and Rural Supplies Colac West Swayn & McCabe Corryong Roger C Brown Daylesford Statewide Irrigation and Rural Supplies Dunolly NH Hall Echuca Agpower Hamilton Windmill Ag Horsham O’Connors Kerang Lipps Bulk Super Leongatha South Windmill Ag Lilydale Agpower Maffra Brown & Wigg Maffra Windmill Ag Meeniyan Brown & Wigg Melton Jon Kay Agricultural Services Mildura Sunrise Ag Ouyen Sunrise Ag Sale Brown & Wigg Shepparton O’Connors Shepparton Shepparton Ag Swan Hill Sunrise Ag Swan Hill Swan Hill Chemicals Terang Windmill Ag Wangaratta McGregor Machinery Warracknabeal O’Connors Warragul Brown & Wigg Wodonga Norwood Farm Machinery Yarram Brown & Wigg
03 5152 1313 03 5334 7555 03 5441 5977 03 5492 2311 03 5472 1135 03 5231 5022 02 6076 1788 03 5348 2649 03 5468 1202 03 5482 2264 03 5572 3522 03 5382 1727 03 5452 1333 03 5667 6600 03 9739 5006 03 5141 1544 03 5147 1122 03 5664 0265 03 9743 5644 03 5023 0284 03 5092 1031 03 5144 4441 03 5821 4555 03 5832 3500 03 5032 0099 03 5032 9255 03 5592 2388 03 5722 9933 03 5398 1877 03 5623 6911 02 6059 7100 03 5182 5148
WESTERN AUSTRALIA Albany Boyup Brook Carnarvon Corrigin Cowaramup Cunderdin Dalwallinu Donnybrook Esperance Esperance Forrestdale Geraldton Geraldton Geraldton Gnowangerup Katanning Kununurra Lake Grace Manjimup Merredin Midvale Moora Muchea Mukinbudin Narembeen Narrogin Narrogin Northam Pingelly South Guildford Southern Cross Wagin Wangara Welshpool Witchcliffe Wongan Hills
Ratten and Slater Machinery Greenline Carnarvon Tractors Neu-Tech Auto Electrics Cowaramup Tractor Sales Ag Implements Jolly & Sons Machinery West Esperance Rural Supplies PH Kerr Growers Agrishop Burando-Hill Geraldton Ag Services AgWest Machinery Ratten and Slater Machinery BTW Spray Shop Ord River District Co-Operative Ltd Greenline Farmlink Rural Services Ag Implements Sprayline Spraying Equipment Cunninghams Ag CD Tractor Sales & Service Ag Implements Ag Implements Greenline Narrogin Pump, Solar and Spraying Ag Implements Greenline Greenline Ag Implements Greenline Boya Equipment Spraymaster Spray Shop Greenline Jolly & Sons
08 9842 8529 08 9765 1305 08 9941 3622 08 9063 2149 08 9755 5207 08 9635 1364 08 9661 1105 08 9731 0700 08 9071 5166 08 9071 3711 08 9397 2800 08 9964 7822 08 9965 7900 08 9923 3021 08 9827 1207 08 9821 4844 08 9168 2255 08 9861 0000 08 9777 2900 08 9041 4100 08 9250 6100 08 9651 1038 08 9571 4117 08 9047 1109 08 9064 7214 08 9861 1666 08 9881 4775 08 9622 5855 08 9861 1666 08 9478 5099 08 9049 1104 08 9861 0000 08 9409 2008 08 9353 1177 08 9757 6215 08 9671 1311 ALGO/CLE2397
ACT Canberra
