Transcript
FIBER OPTIC CONNECTIONS Field Installable Kits/Connectors FiberExpress- Brilliance FiberExpress - Optimax
FIBER OPTIC CONNECTIONS FiberExpress- Brilliance
Fiber Optic Kit BRILLIANCE TOOL KIT: FI-4270 The Tool Kit Contains all accessories in the Basic Kit, and also includes a Field Cleaver, VFL and microscope. The cleaver is a generic field cleaver commonly called a “score and snap” Cleaver. The VFL (Visual Fault Laser) is included with adapter cords that enables on-site installation assurance.
INSTALLATION: 1. Strip and cleave the fiber optic cable to required length 2. Insert cleaved and cleaned fiber into the connector housing 3. Activate the fiber secure tab 4. Push boot onto the connector body SAVES TIME:
SAVES MONEY:
• Less than 5 Seconds • NO tools required for termination • Set up times are greatly reduced • Connectors are useable - up to 5 times • No special/proprietary tools • Install kits are less expensive • Low training expense and time
BRILLIANCE FEATURES: • NO epoxy required • Unlimited shelf life • NO polishing required • Compact, convenient tool kit • Pre-radius PC polished tip • Multimode and SingleMode connectors • Critical steps are performed in factory • Training video included -USB • Floating Non-optical disconnect SC & LC Connectors • Will perform ST, SC, and LC Connectors
FI-4270 Field Kit
BRILLIANCE CONNECTORS: The FiberExpress Brilliance Field-installable Connectors ensure reliable network performance by virtue of their superior design and manufacture, which includes use of the best materials available, expert polishing processes,and a 100% connector reliability test methodology. Quality of this kind enables WPW to provide a 100% installation yield guarantee – even when the connectors are used in environments with temperatures ranging from -40oC to +75oC. The patent-pending FiberExpress Brilliance Connector is the only fiber optic connector in the marketplace to overcome the key challenges of connector installation in the field, that is, it provides a quick and greatly simplified tool-less fiber termination process and the ability to quickly and reliably verify the termination once it’s made. West Penn Wire’s FiberExpress Brilliance Field-installable Connectors are available as 900 Ìm tight buffered single-mode and multimode (OM1,OM2, OM3/OM4) LC Connectors, as well as 900 Ìm tight buffered multimode (OM1, OM2, OM3/OM4) SC and ST Connectors. The connectors are available individually, or in a bulk recyclable package where the 25 connectors are separated from the boots within the package.
FiberExpress Tools and Accessories Catalog No.
Description
FI-4270
FiberExpress Field Installable Complete Kit LC Connectors LC - 900µm, Multimode Beige Connector, 62.5um LC - 900µm, Multimode Black Connector, 50um LC - 900µm, Multimode Aqua Connector, 50um OM3 LC - 900µm, Single-mode Blue Connector, 8um SC Connectors SC - 900µm, Multimode Beige Connector, 62.5um SC - 900µm, Multimode Black Connector, 50um SC - 900µm, Multimode Aqua Connector, 50um OM3 SC - 900µm, Single-mode Connector, 8um 2.0mm Boots for all Brilliance Connectors ST Connectors ST - 900µm, Multimode Beige Connector, 62.5um ST - 900µm, Multimode Black Connector, 50um ST - 900µm, Multimode Aqua Connector, 50um OM3 ST - 900µm, Single-mode Connector, 8um
FI-4240 FI-4241 FI-4242 FI-4243 FI-4244 FI-4245 FI-4246 FI-4247 FI-5214 FI-4248 FI-4249 FI-4250 FI-4251
For: M9C006 and M9C014
PARAMETERS
SPECIFICATIONS
Interconnection Compatibility Field Assembly Time Insertion Loss (MM and SM) Durability (MM and SM) Nominal fiber O.D Storage Temperature Operating Temperature Tensile Strength Reflectance (MM) Reflectance (SM) Ferrule
ST Compatible, SC Compatible, and LC Compatible 10 Seconds - not including prep time .3dB (Typical) MM- less then .2 dB Change, SM- less than .3 dB change (500 cycles) 125um -40° to 75° C 0°to75°C 2 lbs. (54 N) -25dB (Typical) -40dB (Typical) Ceramic
www.westpenn-wpw.com 800-245-4964
FIBER OPTIC CONNECTIONS FiberExpress- Optimax FIBER OPTIC
Fiber Optic Kit OPTIMAX TOOL KIT: FI-3635 The Optimax Kit is an inexpensive, self contained set of tools including all that is needed to succssfully terminate Jacketed and 900um tight buffered fiber using Optimax - ST, SC, or LC compatible connectors. The Kit delivers high performance for field terminations. The kit also provides simple, efficient and fast connections that require no polishing, heat curing equipment or epoxy. The Optimax design is a patented mechanical splice body connector that employes a pre-polished ferrule.
INSTALLATION: 1. Strip and cleave the fiber optic cable to required length 2. Insert cleaved and cleaned fiber into the connector housing 3. Release the pin- which ativates and closes an internal connector cavity 4. Crimp the Connector 5. Push cable boot over the connector SAVES TIME:
SAVES MONEY:
• Less than 40 seconds • No epoxy required • No polishing required • No special/proprietary tools • Install kits are less expensive • Low training expense and time
OPTIMAX FEATURES: • NO epoxy required • Unlimited shelf life • NO polishing required • Compact, convenient tool kit • Pre-radius PC polished tip • Multimode and SingleMode connectors • Critical steps are performed in factory • Training video included -USB • Floating Non-optical disconnect SC & LC Connectors
OPTIMAX CONNECTORS: Delivers high performance optical fiber termination in the field. It provides simple, efficient and fast connectorization, and requires no polishing, heat curing, bonding, or epoxy. Instead, the patented mechanical splice body of OPTIMAX incorporates a factory-mounted fiber stub and a pre-polished ceramic ferrule which consistently provides hassle-free, secure and reliable optical fiber cable termination. OPTIMAX simplifies the technicians work. Even novice technicians can install the OPTIMAX in just a few minutes using inexpensive, commonly available tools such as industry-standard cleavers and strippers. Key installation steps are summarized in illustrated, plasticized quick reference cards’, while the OPTIMAX installation video provides an easy to follow step-by-step guide to performing successful connections. CONNECTORS ARE AVAILABLE IN: • 62.5/125 Micron MultiMode • 50/125 Micron MultiMode • 8.3/125 Micron SingleMode.
Optimax Tools and Accessories Catalog No.
Description
FI-3635 FI-3634 FI-3641 FI-8829 FI-8832 FI-8835 FI-8837 FI-1075 FI-1074 FI-0028 FI-0029 FI-1077 FI-1076 FI-1791 FI-1792 FI-1793 FI-1794 FI-1981 FI-1982 FI-1983 FI-1984
OPTIMAX Complete Kit Installation Tool- ST ST Compatible Crimp Tool Fiber Cleaver Microscope ST 900um Connector - 62.5/125um ST Universal connector- 62.5/125um ST 900um Connector - 50/125um ST Universal connector- 50/125um SC Universal connector- 62.5/125um SC 900um connector- 62.5/125um SC 900um connector- 50/125um SC Universal connector- 50/125um ST Single-Mode 900um connector SC Single-Mode 900um connector ST- Accessory Kit For Jacketed Single-Mode SC- Accessory Kit For Jacketed Single-Mode LC 900um connector- 62.5/125um LC 900um connector- 50/125um LC 900um connector- Single-Mode LC- Accessory Kit For Jacketed Single-Mode Fiber
PARAMETERS
SPECIFICATIONS
Interconnection Compatibility Field Assembly Time Insertion Loss (MM and SM) Durability (MM and SM) Nominal fiber O.D Storage Temperature Operating Temperature Tensile Strength Reflectance (MM) Reflectance (SM) Ferrule
ST Compatible, SC Compatible, and LC Compatible 1 min. 900um, 3 min for Jacketed .3dB (Typical) MM- less then .2 dB Change, SM- less than .3 dB change (500 cycles) 125um -40° to 40° 0°to55°C 12 lbs. (54 N) -30dB (Typical) -40dB (Typical) Ceramic
www.westpenn-wpw.com 800-245-4964
