Transcript
DVI-LCTX-500M-1 DVI-LCRX-500M-1 1920x1200, 500 m
OptoIC Technology The Optical I/O Company
Optical DVI Extender Modules
Description Built upon OptoIC’s optical transceiver technology, the
Pb
DVI extender module is optimized for sending and
Lead-Free
DVI-LCTX-500M-1 DVI-LCRX-500M-1
receiving high definition video signals. Proprietary digital design is utilized to ensure video transmission over fiber with minimum distortion and interference. This module is optimized for DVI video signals using 850 nm VCSEL technology and multimode fibers. Standard DVI and four LC interface connectors are built in for easy installation. It is designed to send signals from the TX module to the RX module in a one-way direction. This optical DVI extender supports up to 1920 x 1200 resolution and 500 m distance with 50/125 um multimode fibers. ~ Fiber cables not included ~
Key Features
Applications
850 nm technology with LC multimode fibers
PC to monitor
Up to 1920x1200 resolution and 500 m distance
DVD or video game player to LCD TV
DVI-D single link
Video surveillance link
Pseudo DDC for EDID support*
Remote monitor for warehouse and control
Not HDCP compliant
Home entertainment systems
100 – 240 VAC to 5 VDC power supply included RoHS compliant, CE and FCC approved
Ordering Information
Compact size: 90 x 40 x 20 mm * Virtual EDID data structure is incorporated inside the TX module to provide pseudo monitor ID to the
Part Number: DVI-LCTX-500M-1 Optical DVI TX module, 850 nm, 500 m, -10-50°C
host computer. This virtual EDID data enables the
Part Number: DVI-LCRX-500M-1
display to support various video modes such as
Optical DVI RX module, 850 nm, 500 m, -10-50°C
VGA, SVGA, … and WUXGA.
System Application Example
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 1
OptoIC Technology
DVI-LCTX-500M-1 DVI-LCRX-500M-1 1920x1200, 500 m
DVI-LCTX-500M-1 DVI-LCRX-500M-1
The Optical I/O Company
Operating Conditions Parameter
Min.
Typical
Max.
Units
Operate Temperature
-10
25
50
C
Storage Temperature
-20
25
75
C
Supply Current (TX)
---
180
210
mA
Supply Current (RX)
---
280
310
mA
Video Resolution v.s. Transmission Distance Display
Resolution
Distance (m) with 62.5/125 µm MMF
Distance (m) with 50/125 µm MMF
WUXGA
1920 X 1200 (16:10)
300 m
500 m
UXGA
1600 X 1200 (4:3)
300 m
500 m
TV 1080p
1920 X 1080p (16:9)
300 m
500 m
SXGA
1280 X 1024 (5:4)
400 m
600 m
XGA
1024 X 768 (4:3)
500 m
700 m
TV 1080i
1920 X 1080i (16:9)
500 m
700 m
TV 720p
1280 X 720p (16:9)
500 m
700 m
SVGA
800 X 600 (4:3)
500 m
700 m
Mechanical Dimension
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 2
OptoIC Technology
DVI-LCTX-500M-1 DVI-LCRX-500M-1
The Optical I/O Company
DVI-LCTX-500M-1 DVI-LCRX-500M-1 1920x1200, 500 m
Package List 1.DVI-LCTX-500M-1 optical DVI TX module
- 1 unit
2.DVI-LCRX-500M-1 optical DVI RX module
- 1 unit
3.5V AC/DC power supply
- 2 units
4.LC fiber cables – not included and ordered separately.
Installation Procedure 1.Install four LC fiber cables into the TX and RX modules. Match the number (1,2,3,4) of the TX to RX modules on the same fiber cable to establish a compete TX-RX link. 2.Connect power supply to the AC power outlet and to the RX module first. Do not connect the other power supply to the TX at this time because TX power may be supplied by the PC graphic card via the DVI connection. 3.Plug the TX module to the DVI connector interface of the video source (PC, DVD player …). 4.Plug the RX module to the DVI connector interface of the display device (monitor). 5.Turn on the video source and display device. If there is no display, try to install the power supply to the TX module. 6.Adjust the display resolution for best viewing.
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 3
DVI-LCTX-5K-1 DVI-LCRX-5K-1 1920x1080, 5 km
OptoIC Technology The Optical I/O Company
Optical DVI Extender Modules
Description Built upon OptoIC’s optical transceiver technology, the
Pb
DVI extender module is optimized for sending and
Lead-Free
DVI-LCTX-5K-1 DVI-LCRX-5K-1
receiving high definition video signals. Proprietary digital design is utilized to ensure video transmission over fiber with minimum distortion and interference. This module is optimized for DVI video signals using 1310 nm laser and singlemode fibers (SMF). Standard DVI and four LC interface connectors are built in for easy installation. It is designed to send signals from the TX module to the RX module in a one-way direction. This optical DVI extender supports up to 1920 x 1080 resolution and 5 km distance with standard 9/125 um singlemode optical fibers. ~ Fiber cables not included ~
Key Features
Applications
1310 nm technology with LC singlemode fibers
PC to monitor
Up to 1920x1080 resolution and 5 km distance
DVD or video game player to LCD TV
DVI-D single link
Video surveillance link
Pseudo DDC for EDID support*
Remote monitor for warehouse and control
Not HDCP compliant
Home entertainment systems
100 – 240 VAC to 5 VDC power supply included RoHS compliant, CE and FCC approved
Ordering Information
Compact size: 90 x 40 x 20 mm * Virtual EDID data structure is incorporated inside the TX module to provide pseudo monitor ID to the host computer. This virtual EDID data enables the display to support various video modes such as
Part Number: DVI-LCTX-5K-1 Optical DVI TX module, 1310 nm, 5 km, -10-50°C Part Number: DVI-LCRX-5K-1 Optical DVI RX module, 1310 nm, 5 km, -10-50°C
VGA, SVGA, … and SXGA.
System Application Example
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 4
OptoIC Technology
DVI-LCTX-500M-1 DVI-LCRX-500M-1 1920x1080, 5 km
DVI-LCTX-5K-1 DVI-LCRX-5K-1
The Optical I/O Company
Operating Conditions Parameter
Min.
Typical
Max.
Units
Operate Temperature
-10
25
50
C
Storage Temperature
-20
25
75
C
Supply Current (TX)
---
350
400
mA
Supply Current (RX)
---
250
300
mA
Video Resolution v.s. Transmission Distance Display
Resolution
Distance (m) with 9/125 µm SMF
TV 1080p
1920 X 1080p (16:9)
5,000 m
SXGA
1280 X 1024 (5:4)
5,000 m
XGA
1024 X 768 (4:3)
5,000 m
TV 1080i
1920 X 1080i (16:9)
5,000 m
TV 720p
1280 X 720p (16:9)
5,000 m
SVGA
800 X 600 (4:3)
5,000 m
Mechanical Dimension
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 5
OptoIC Technology
DVI-LCTX-5K-1 DVI-LCRX-5K-1
The Optical I/O Company
DVI-LCTX-500M-1 DVI-LCRX-500M-1 1920x1080, 5 km
Package List 1.DVI-LCTX-5K-1 optical DVI TX module
- 1 unit
2.DVI-LCRX-5K-1 optical DVI RX module
- 1 unit
3.5V AC/DC power supply
- 2 units
4.LC fiber cables – not included and ordered separately.
Installation Procedure 1.Install four LC fiber cables into the TX and RX modules. Match the number (1,2,3,4) of the TX to RX modules on the same fiber cable to establish a compete TX-RX link. 2.Connect power supply to the AC power outlet and to the RX module first. Do not connect the other power supply to the TX at this time because TX power may be supplied by the PC graphic card via the DVI connection. 3.Plug the TX module to the DVI connector interface of the video source (PC, DVD player …). 4.Plug the RX module to the DVI connector interface of the display device (monitor). 5.Turn on the video source and display device. If there is no display, try to install the power supply to the TX module. 6.Adjust the display resolution for best viewing.
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 6
HDI-SCTX-200M-1 HDI-SCRX-200M-1 1920x1080, 200 m
OptoIC Technology The Optical I/O Company
Optical HDMI Extender Modules
Description Built upon OptoIC’s optical transceiver technology, the HDMI extender module is optimized for sending
HDI-SCTX-200M-1 HDI-SCRX-200M-1
Pb Lead-Free
and receiving high definition video signals. Proprietary digital design is utilized to ensure video transmission over fiber with minimum distortion and interference. This module is optimized for HDMI video signals using 850 nm VCSEL technology and multimode fibers. Standard HDMI type A and dual SC interface connectors are built in for easy installation. It is designed to send signals from the TX module to the RX module in a one-way direction. OptoIC’s optical HDMI modules support industry standards such as TDMS, DDC, CEC, and HPS signals.
~ Fiber cables not included ~
It’s also HDCP compliant. This optical HDMI extender supports up to 1920 x 1080 resolution and 200 m distance with 62.5/125 um
Applications PC to monitor
multimode fibers.
DVD or video game player to LCD TV Video surveillance link
Key Features
Remote monitor for warehouse and control
850 nm technology with dual SC multimode fiber
Home entertainment systems
Up to 1920x1080 resolution and 200 m distance
Ordering Information
TMDS, DDC, CEC, and HPD compliant HDCP compliant 100 – 240 VAC to 5 VDC power supply included RoHS compliant, CE and FCC approved Compact size: 145 x 95 x 26 mm
Part Number: HDI-SCTX-200M-1 Optical HDMI TX module, 200 m, -10-50°C Part Number: HDI-SCRX-200M-1 Optical HDMI RX module, 200 m, -10-50°C
System Application Example
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 7
OptoIC Technology
HDI-SCTX-200M-1 HDI-SCRX-200M-1 1920x1080, 200 m
HDI-SCTX-200M-1 HDI-SCRX-200M-1
The Optical I/O Company
Operating Conditions Parameter
Min.
Typical
Max.
Units
Operate Temperature
-10
25
50
C
Storage Temperature
-20
25
75
C
Supply Current (TX)
---
600
mA
Supply Current (RX)
---
600
mA
Package List 1.HDI-SCTX-200M-1 optical HDMI TX module
- 1 unit
2.HDI-SCRX-200M-1 optical HDMI RX module
- 1 unit
3.5V AC/DC power supply
- 2 units
4.HDMI Type A cables – not included and ordered separately. 5.Dual SC fiber cables – not included and ordered separately.
Installation Procedure 1.Install two SC fiber cables into the TX and RX modules. Make sure to match the same fiber cable from the TX to RX modules to establish a compete TX-RX link. 2.Connect the HDMI cables from the video source (PC, DVD player …) to the HDMI TX module and from the HDMI RX module to the display device (monitor). 3.Connect power supply to the AC power outlet and to the TX and RX modules. 4.Turn on the video source and display device. Adjust the display resolution for best viewing.
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 8
CVI-FCTX-20K-1 CVI-FCRX-20K-1 4 Video Channels, 20 km
OptoIC Technology The Optical I/O Company
Optical Composite Video Extender
Description Built upon OptoIC’s optical transceiver technology, this
Pb
extender module is specifically designed for sending
Lead-Free
CVI-FCTX-20K-1 CVI-FCRX-20K-1
and receiving composite video signals. Proprietary digital design is utilized to ensure video transmission over fiber with minimum distortion and interference. This product is designed to send signals from the TX module to the RX module in the one-way direction. Each module is equipped with the following: four video channels, one RS422/RS485 control line, and one FC type optical connector interface. This optical extender is plug and play and supports NTSC video for up to 20 km distance with 9/125 um single mode fibers (SMF). ~ Fiber cables not included ~
Key Features
Applications
20 km transmission distance
Video surveillance link
1310/1550 nm technology with FC SMF
Remote monitor for warehouse and control
NTSC video format with 8 MHz bandwidth
Home entertainment systems
4X BNC video I/O connectors 1X RS422/RS485 control line
Ordering Information
1X FC optical fiber interface connector 100 – 240 VAC to 5 VDC power supply included RoHS compliant Compact size: 158 x 81 x 30 mm
Part Number: CVI-FCTX-2K-1 Optical Composite video TX extender module, 20 km, -10-65°C Part Number: CVI-FCRX-2K-1 Optical Composite video RX extender module, 20 km, -10-65°C
System Application Example
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 9
OptoIC Technology The Optical I/O Company
CVI-FCTX-2K-1 CVI-FCRX-2K-1 4 Video Channels, 20 km
CVI-FCTX-20K-1 CVI-FCRX-20K-1
Operating Conditions Parameter
Min.
Typical
Max.
Units
Operate Temperature
-10
25
65
C
Storage Temperature
-20
25
85
C
Signal to Noise Ratio
---
50
---
dB
BNC Impedance
---
75
---
Ohm
Output Voltage
---
1
---
V
Package List 1.CVI-FCTX-20K-1 optical composite video/audio TX module
- 1 unit
2.CVI-FCRX-20K-1 optical composite video/audio RX module
- 1 unit
3.5V AC/DC power supply
- 2 units
4.Simplex FC fiber cables – not included and ordered separately. 5.RS422/485 control cable – not included and ordered separately.
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 10
CVA-FCTX-20K-1 CVA-FCRX-20K-1 4 Video+Audio Channels, 20 km
OptoIC Technology The Optical I/O Company
Optical Composite Video/Audio Extender
Description Built upon OptoIC’s optical transceiver technology, this
Pb
extender module is specifically designed for sending
Lead-Free
CVA-FCTX-20K-1 CVA-FCRX-20K-1
and receiving composite video and audio signals. Proprietary digital design is utilized to ensure video and audio transmission over fiber with minimum distortion and interference. This product is designed to send signals from the TX module to the RX module in the one-way direction. Each module is equipped with the following: four video and audio channels, one RS422/RS485 control line, and one FC type optical connector interface. This optical extender is plug and play and supports NTSC video for up to 20 km distance with 9/125 um single mode fibers (SMF).
~ Fiber cables not included ~
Key Features
Applications
20 km transmission distance
Video surveillance link
1310/1550 nm technology with FC SMF
Remote monitor for warehouse and control
NTSC video format with 8 MHz bandwidth
Home entertainment systems
4X BNC video I/O connectors 4X 3.5 mm phone jack audio connectors
Ordering Information
1X RS422/RS485 control line
Part Number: CVA-FCTX-20K-1
1X FC optical fiber interface connector
Optical Composite video/audio TX extender module, 20 km, -10-65°C
Stereo line In/out 100 – 240 VAC to 5 VDC power supply included RoHS compliant Compact size: 232 x 82 x 30 mm
Part Number: CVA-FCRX-2K-1 Optical Composite video/audio RX extender module, 20 km, -10-65°C
System Application Example
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 11
OptoIC Technology The Optical I/O Company
CVA-FCTX-20K-1 CVA-FCRX-20K-1 Video+Audio, 20 km
CVA-FCTX-20K-1 CVA-FCRX-20K-1
Operating Conditions Parameter
Min.
Typical
Max.
Units
Operate Temperature
-10
25
65
C
Storage Temperature
-20
25
85
C
Signal to Noise Ratio
---
50
---
dB
BNC Impedance
---
75
---
Ohm
Frequency Response
20
---
20,000
Hz
Output Voltage
---
1
---
V
Package List 1.CVA-FCTX-20K-1 optical composite video/audio TX module
- 1 unit
2.CVA-FCRX-20K-1 optical composite video/audio RX module
- 1 unit
3.5V AC/DC power supply
- 2 units
4.Simplex FC fiber cables – not included and ordered separately. 5.RS422/485 control cable – not included and ordered separately.
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 12
SDI-LCTX-300M SDI-LCRX-300M 850 nm SFP, 300 m
OptoIC Technology The Optical I/O Company
SFP Optical SDI Transceivers
Description
Pb
OptoIC’s SDI optical transceiver is built upon years of experience in SFP design and video extender
SDI-LCTX-300M SDI-LCRX-300M
Lead-Free
technology. This design uses advanced 850 nm VCSEL to support optical serial digital signals defined in SMPTE297-2006. Proprietary digital coding is utilized to ensure video transmission over fiber with minimum distortion and interference. This product supports data rates from 50 Mb/s to 3 Gb/s with standard multimode fibers. It’s compatible with SMPTE 259M, 344M, 292M, and 424M SDI pathological video patterns (SD-SDI, HD-SDI, and 3G-SDI). Industry standard SFP plug and play package and LC connector interface make it easy for installation. The TX package (SDI-LCTX-300M) provides two transmitter channels to match the two receiver channels in the RX package (SDI-LCRX-300M). This compact design enables two one-way video transmission with minimum space in the system.
Applications SMPTE 297-2006
Key Features
Theater video interconnects
SMPTE 297-2006 compatible
Home entertainment systems
Support SD-SDI, HD-SDI, and 3G-SDI Industry standard hot pluggable SFP package
Ordering Information
850 nm VCSEL technology Dual TX and RX channels with standard MMF
Part Number: SDI-LCTX-300M
Up to 1,000 m transmission distance @ SD-SDI
SFP, SDI TX optical transmitter, 850 nm, MM, 300 m, 0-70C, LC, 3.3V, RoHS.
Up to 500 m transmission distance @ HD-SDI Up to 300 m transmission distance @ 3G-SDI
Part Number: SDI-LCRX-300M
RoHS compliant
SFP, SDI RX optical receiver, 850 nm, MM, 300 m, 0-70C, LC, 3.3V, RoHS.
Compact size: 56 x 15 x 12 mm
Operating Conditions
Link Application TX
Phone: (949) 679-5712
2x LC-LC MMF
Fax: (949) 679-5749
RX
Parameter
Min.
Typical
Max.
Units
Operate Temperature
0
25
70
C
Operating Current
---
150
200
mA
Data Rate
50
3,000
Mb/s
Supply Voltage
3.1
3.5
V
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
3.3
Page 13
OptoIC Technology
SDI-LCTX-300M SDI-LCRX-300M 850 nm SFP, 300 m
SDI-LCTX-300M SDI-LCRX-300M
The Optical I/O Company
Absolute Maximum Ratings Parameter
Symbol
Min.
Max.
Units
Tst
-40
85
C
Supply Voltage
Vcc
0
4.0
V
ESD Tolerance
VESD
1,000
V
Relative Humidity
R.H.
95
% RH
Storage Temperature
5
Transmission Distance SDI
Data Rate
Distance
3G-SDI
2.97 Gb/s
300 m
HD-SDI
1.485 Gb/s
500 m
SD-SDI
270 Mb/s
1,000 m
Transmitter Electro-Optical Characteristics (SDI-LCTX-300M) Parameter Optical Wavelength 1
Differential Input Voltage
Differential Input Impedance 2 Optical Output Power
3
Min.
Typical
Max.
Units
λo
830
850
870
nm
∆V i
0.2
1.2
V
Z Po
100 -7
∆λ
Spectral Width (rms) Extinction Ratio Rise/Fall Time (20% - 80%)
Symbol
4
ET
5
Tr/Tf
135
ohm -2
dBm
1
nm
7.5
dB 1,500
ps
-118
dB/Hz
Relative Intensity Noise
RIN
SCL, SDA Voltage - Low
V-
0
0.5
V
SCL, SDA Voltage - High
V+
2.5
Vcc
V
TX Disable Voltage - Low
VDL
0
0.8
V
TX Disable Voltage – High
VDH
2.0
Vcc
V
Notes: 1. 2. 3. 4.
Module is designed for AC coupling. DC voltage will be filtered by internal capacitor. Single ended will be 50 ohm for each signal line. Output of average coupling optical power into 62.5/125 µm MMF. Rise/fall time depends on SMPTE data rate
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 14
OptoIC Technology
SDI-LCTX-300M SDI-LCRX-300M 850 nm SFP, 300 m
SDI-LCTX-300M SDI-LCRX-300M
The Optical I/O Company
Receiver Electro-Optical Characteristics (SDI-LCRX-300M) Parameter
Symbol
Min.
Receiver Overload
Pmax
0
Receiver Sensitivity 1
PI
Operating Wavelength
λc
780
∆V o
0.55
Differential Output Voltage Differential Input Impedance
2
Z
Signal Detect - Hysteresis Rise/Fall Time
3
Tr/Tf
Typical
Max.
Units dBm
-16
dBm
850
880
nm
0.66
0.85
V
100
Ohm
1
6
dB
135
1,500
ps
-16
dBm
RX Signal Loss – Asserted
PSD+
RX Signal Loss – Deasserted
PSD-
-26
SCL, SDA Voltage - High
V+
2.5
Vcc
V
SCL, SDA Voltage - Low
V-
0
0.5
V
Serial ID Clock Rate
fc
100
kHz
dBm
Notes: 1. 2. 3.
Test with pathological pattern, 223 – 1 PRBS data pattern, and > 1x10-12 of Bit-Error-Rate (BER). Single ended will be 50 ohm for each signal line. Rise/fall time depends on SMPTE data rate
Mechanical Dimension Bottom View
Front View
Top View
TX1, RX1
TX2, RX2
Side View
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 15
OptoIC Technology
SDI-LCTX-300M SDI-LCRX-300M 850 nm SFP, 300 m
SDI-LCTX-300M SDI-LCRX-300M
The Optical I/O Company
Pin-out Assignment SDI-LCTX-300M Transmitter Bottom of Board
(as viewed thru top of the board)
Top of Board
1 2 3 4
Towards Bezel
20
20
TX_DIS
1
TX GND
19
19
TD1-
2
NC
18
18
TD1+
3
NC
17
17
TX GND
4
TX GND
16
TX1 Vcc
5
SCL
15
TX2 Vcc
6
SDA
14
TX GND
7
TX GND
13
NC
8
TD2+
12
NC
9
TD2-
11
TX GND
16
5
Towards ASIC
15
6
14
7
13
8
12
9
11
10
Host Board Connector Pad Layout
10
TX2_DIS
SFP Transceiver Pad Layout
PIN
Symbol
Description
PIN
Symbol
Description
1
TX GND
Transmitter Ground
11
TX GND
Transmitter Ground
2
NC
No Connection
12
NC
No Connection
3
NC
No Connection
13
NC
No Connection
4
TX GND
Transmitter Ground
14
TX GND
Transmitter Ground
5
SCL
Serial I2C Clock
15
TX2 Vcc
TX2 Transmitter Power Supply
6
SDA
Serial
I2C
16
TX1 Vcc
TX1 Transmitter Power Supply
7
TX GND
Transmitter Ground
17
TX GND
Transmitter Ground
8
TD2+
TX2 Transmitter Data Input +
18
TD1+
TX1 Transmitter Data Input +
9
TD2−
TX2 Transmitter Data Input −
19
TD1−
TX1 Transmitter Data Input −
10
TX2_DIS
TX2 Transmitter Disable
20
TX1_DIS
TX1 Transmitter Disable
Phone: (949) 679-5712
Fax: (949) 679-5749
Data
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 16
OptoIC Technology
SDI-LCTX-300M SDI-LCRX-300M 850 nm SFP, 300 m
SDI-LCTX-300M SDI-LCRX-300M
The Optical I/O Company
Pin-out Assignment SDI-LCRX-300M Receiver Bottom of Board
(as viewed thru top of the board)
Top of Board
1 2 3 4
Towards Bezel
20
20
NC
1
RX GND
19
19
NC
2
RD2-
18
18
NC
3
RD2+
17
17
RX GND
4
RX GND
16
RX2 Vcc
5
SCL
15
RX1 Vcc
6
SDA
14
RX GND
7
RX GND
13
RD1+
8
NC
12
RD1-
9
NC
11
RX GND
10
NC
16
5
15
6
Towards ASIC
14
7
13
8
12
9
11
10
Host Board Connector Pad Layout
SFP Transceiver Pad Layout
PIN
Symbol
Description
PIN
Symbol
Description
1
RX GND
Receiver Ground
11
RX GND
Receiver Ground
2
RD2-
RX2 Receiver Data Output −
12
RD1-
RX1 Receiver Data Output −
3
RD2+
RX2 Receiver Data Output +
13
RD1+
RX1 Receiver Data Output +
4
RX GND
Receiver Ground
14
RX GND
Receiver Ground
5
SCL
Serial I2C Clock
15
RX1 Vcc
RX1 Transmitter Power Supply
6
SDA
Serial
I2C
16
RX2 Vcc
RX2 Transmitter Power Supply
7
RX GND
Receiver Ground
17
RX GND
Receiver Ground
8
NC
No Connection
18
NC
No Connection
9
NC
No Connection
19
NC
No Connection
10
NC
No Connection
20
NC
No Connection
Phone: (949) 679-5712
Fax: (949) 679-5749
Data
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 17
OptoIC Technology
SDI-LCTRX-300M 850 nm SFP, 300 m
The Optical I/O Company
SFP Optical SDI Transceivers
Description
Pb
OptoIC’s SDI optical transceiver is built upon years of experience in SFP design and video extender
SDI-LCTRX-300M
Lead-Free
technology. This design uses advanced 850 nm VCSEL to support optical serial digital signals defined in SMPTE297-2006. Proprietary digital coding is utilized to ensure video transmission over fiber with minimum distortion and interference. This product supports data rates from 50 Mb/s to 3 Gb/s with standard multimode fibers. It’s compatible with SMPTE 259M, 344M, 292M, and 424M SDI pathological video patterns (SD-SDI, HD-SDI, and 3G-SDI). Industry standard SFP plug and play package and LC connector interface make it easy for installation. This design provides both transmission and receiving of video signals built in the same SFP package. This compact design enables a two-way video communication with minimum space in the system.
Applications Key Features
SMPTE 297-2006
SMPTE 297-2006 compatible
Theater video interconnects Home entertainment systems
Support SD-SDI, HD-SDI, and 3G-SDI Industry standard hot pluggable SFP package 850 nm VCSEL technology
Ordering Information
TX and RX channels with standard MMF
Part Number: SDI-LCTRX-300M
Up to 1,000 m transmission distance @ SD-SDI
SFP, SDI optical transceiver, 850 nm, MM, 300 m, 0-70C, LC, 3.3V, RoHS.
Up to 500 m transmission distance @ HD-SDI Up to 300 m transmission distance @ 3G-SDI RoHS compliant Compact size: 56 x 15 x 12 mm
Operating Conditions
System Application Example TX+RX
Phone: (949) 679-5712
2x LC-LC MMF
Fax: (949) 679-5749
TX+RX
Parameter
Min.
Typical
Max.
Units
Operate Temperature
0
25
70
C
Operating Current
---
150
200
mA
Data Rate
50
3,000
Mb/s
Supply Voltage
3.1
3.5
V
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
3.3
Page 18
OptoIC Technology The Optical I/O Company
SDI-LCTRX-300M 850 nm SFP, 300 m
SDI-LCTRX-300M
Absolute Maximum Ratings Parameter
Symbol
Min.
Max.
Units
Tst
-40
85
C
Supply Voltage
Vcc
0
4.0
V
ESD Tolerance
VESD
1,000
V
Relative Humidity
R.H.
95
% RH
Storage Temperature
5
Transmission Distance SDI
Data Rate
Distance
3G-SDI
2.97 Gb/s
300 m
HD-SDI
1.485 Gb/s
500 m
SD-SDI
270 Mb/s
1,000 m
Transmitter Electro-Optical Characteristics Parameter Optical Wavelength 1
Differential Input Voltage
Differential Input Impedance 2 Optical Output Power
3
Min.
Typical
Max.
Units
λo
830
850
870
nm
∆V i
0.2
1.2
V
Z Po
100 -7
∆λ
Spectral Width (rms) Extinction Ratio Rise/Fall Time (20% - 80%)
Symbol
4
ET
5
Tr/Tf
135
ohm -2
dBm
1
nm
7.5
dB 1,500
ps
-118
dB/Hz
Relative Intensity Noise
RIN
SCL, SDA Voltage - Low
V-
0
0.5
V
SCL, SDA Voltage - High
V+
2.5
Vcc
V
TX Disable Voltage - Low
VDL
0
0.8
V
TX Disable Voltage – High
VDH
2.0
Vcc
V
Notes: 1. 2. 3. 4.
Module is designed for AC coupling. DC voltage will be filtered by internal capacitor. Single ended will be 50 ohm for each signal line. Output of average coupling optical power into 62.5/125 µm MMF. Rise/fall time depends on SMPTE data rate
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 19
OptoIC Technology The Optical I/O Company
SDI-LCTRX-300M 850 nm SFP, 300 m
SDI-LCTRX-300M
Receiver Electro-Optical Characteristics Parameter
Symbol
Min.
Receiver Overload
Pmax
0
Receiver Sensitivity 1
PI
Operating Wavelength
λc
780
∆V o
0.55
Differential Output Voltage Differential Input Impedance
2
Z
Signal Detect - Hysteresis Rise/Fall Time
3
Tr/Tf
Typical
Max.
Units dBm
-16
dBm
850
880
nm
0.66
0.85
V
100
Ohm
1
6
dB
135
1,500
ps
-16
dBm
RX Signal Loss – Asserted
PSD+
RX Signal Loss – Deasserted
PSD-
-28
SCL, SDA Voltage - High
V+
2.5
Vcc
V
SCL, SDA Voltage - Low
V-
0
0.5
V
Serial ID Clock Rate
fc
100
kHz
dBm
Notes: 1. 2. 3.
Test with pathological pattern, 223 – 1 PRBS data pattern, and > 1x10-12 of Bit-Error-Rate (BER). Single ended will be 50 ohm for each signal line. Rise/fall time depends on SMPTE data rate
Mechanical Dimension Bottom View
Front View
Top View
TX
RX
Side View
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 20
OptoIC Technology The Optical I/O Company
SDI-LCTRX-300M 850 nm SFP, 300 m
SDI-LCTRX-300M Pin-out Assignment
Bottom of Board
(as viewed thru top of the board)
Top of Board
1 2 3 4
Towards Bezel
20
20
TX_GND
1
TX GND
19
19
TD-
2
TX_FAULT
18
18
TD+
3
TX_DIS
17
17
TX GND
4
MOD_DEF (2)
16
TX Vcc
5
MOD_DEF (1)
15
RX Vcc
6
MOD_DEF (0)
14
RX GND
7
NC
13
RD+
8
RX_LOS
12
RD-
9
RX_GND
11
RX GND
10
RX_GND
16
5
Towards ASIC
15
6
14
7
13
8
12
9
11
10
SFP Transceiver Pad Layout
Host Board Connector Pad Layout
PIN
Symbol
Description
PIN
Symbol
Description
1
TX GND
Transmitter Ground
11
RX GND
Receiver Ground
2
TX_FAULT
Transmitter Fault
12
RD−
Receiver Data Output −
3
TX_DIS
Transmitter Disable
13
RD+
Receiver Data output +
4
MOD_DEF (2)
Module Definition (2)
14
RX GND
Receiver Ground
5
MOD_DEF (1)
Module Definition (1)
15
RX Vcc
Receiver Power Supply
6
MOD_DEF (0)
Module Definition (0)
16
TX Vcc
Transmitter Power Supply
7
NC
No Connection
17
TX GND
Transmitter Ground
8
RX_LOS
Receiver Loss of Signal
18
TD+
Transmitter Data Input +
9
RX GND
Receiver Ground
19
TD−
Transmitter Data Input −
10
RX GND
Receiver Ground
20
TX GND
Transmitter Ground
Phone: (949) 679-5712
Fax: (949) 679-5749
© 2001-2011 OptoIC Technology, Inc
37 Santa Comba, Irvine, CA 92606, USA
http://www.optoictech.com
Email:
[email protected]
http://www.opticaltransceiver.com
Page 21
