Transcript
H2Hybrid - Fuel Cell Automotive Trainer See page 7 for details
SPECIAL OFFER See back page for offer
Purchase a Da Vinci F1.0 Pro and get a
FREE
Soldering See page 3
Laboratory Equipment
Paradime 3D Pen Order code 25-0150
www.rapidonline.com
Cast Acrylic Solid Colour Sheets These cast acrylic sheets from Perspex® are available in a choice of sizes and in a range of vibrant, bright colours. These coloured sheets will make any project get noticed – whether it’s a sleek storage unit, a specialist point of sale display or a new corporate identity. With excellent resistance to outdoor weathering, unsurpassed batch-to-batch colour consistency and excellent environmental credentials, Perspex® Solid colours will help you bring your creative ideas to life.
Size (mm) Colour 600 x 400 x 3 Red 600 x 400 x 3 Blue 600 x 400 x 3 Green 600 x 400 x 3 Yellow 600 x 400 x 3 Black 600 x 400 x 3 Orange 600 x 400 x 3 White 600 x 400 x 3 Violet 600 x 400 x 3 Pink 600 x 400 x 3 Opal 600 x 400 x 5 Red 600 x 400 x 5 Blue 600 x 400 x 5 Green 600 x 400 x 5 Yellow 600 x 400 x 5 Black 600 x 400 x 5 Orange 600 x 400 x 5 White 600 x 400 x 5 Pink 600 x 400 x 5 Opal
Order code 37-3701 37-3702 37-3703 37-3704 37-3705 37-3706 37-3707 37-3708 37-3709 37-3710 37-3712 37-3713 37-3714 37-3715 37-3716 37-3717 37-3718 37-3719 37-3720
1+ 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 4.45 7.99 7.99 7.99 7.99 7.99 7.99 7.99 7.99 7.99
Size (mm) Colour 1000 x 500 x 3 Red 1000 x 500 x 3 Blue 1000 x 500 x 3 Green 1000 x 500 x 3 Yellow 1000 x 500 x 3 Black 1000 x 500 x 3 Orange 1000 x 500 x 3 White 1000 x 500 x 3 Violet 1000 x 500 x 3 Pink 1000 x 500 x 3 Opal 1000 x 500 x 5 Red 1000 x 500 x 5 Blue 1000 x 500 x 5 Green 1000 x 500 x 5 Yellow 1000 x 500 x 5 Black 1000 x 500 x 5 Orange 1000 x 500 x 5 White 1000 x 500 x 5 Pink 1000 x 500 x 5 Opal
Order code 37-3722 37-3723 37-3724 37-3725 37-3726 37-3727 37-3728 37-3729 37-3730 37-3731 37-3733 37-3734 37-3735 37-3736 37-3737 37-3738 37-3739 37-3740 37-3741
1+ 8.99 8.99 8.99 8.99 8.99 8.99 8.99 8.99 8.99 8.99 17.29 17.29 17.29 17.29 17.29 17.29 17.29 17.29 17.29 553998
Cast Acrylic Clear Sheets These clear cast acrylic sheets from Perspex® transmit 92% of all visible light – that’s better even than glass. Add to this excellent resistance to outdoor weathering, high tensile strength and rigidity, light weight and resistance to impact and it is easy to see why Perspex® Clear sheets are ideal for applications requiring critical visual performance and durability. Available in a range of sizes and thicknesses.
Cast Clear Acrylic Rods
Clear Polycarbonate Sheets 400 x 500mm (L x W)
Diameter Length 500mm 6mm 10mm 12mm 15mm 20mm 25mm Length 2m 6mm 10mm 12mm 15mm 20mm 25mm
Modelcraft Clear Polycarbonate Sheets 400 x 500mm (L x W) can be bent when cold and shaped or deep drawn when heat is applied. Ideal for cabin glazing or any type of glazing. • 400 x 500 mm
0.75mm
1.0mm
£3.03
£4.03
Order code 50-7404
Order code 50-7405
1.5mm
£6.07
Order code 50-7406
2.0mm
£8.02
Order code 50-7407
• High gloss, hard surface • Easy to clean • Long service life • Safety glazing material meeting
the requirements of ANSI Z.97 and BS 6262 • Easy to thermoform with low-cost tooling Size 600 x 400 x 3mm 600 x 400 x 5mm 1000 x 500 x 3mm 1000 x 500 x 5mm
Order code 37-3700 37-3711 37-3721 37-3732
1+ 3.95 6.49 7.95 13.95 553997
Extruded Clear Acrylic Tubes
Order code
1+
37-3823 37-3825 37-3826 37-3827 37-3828 37-3829
0.869 1.56 2.17 2.98 4.29 7.02
37-3803 37-3805 37-3806 37-3807 37-3808 37-3809
3.40 6.16 8.60 11.80 17.00 27.80
Outside dia. Length 2m 10mm 12mm 15mm 20mm 25mm 40mm 50mm 60mm 70mm 80mm 100mm
Inside dia.
Order code
6mm 8mm 11mm 16mm 21mm 34mm 44mm 54mm 64mm 74mm 94mm
37-3790 37-3791 37-3792 37-3793 37-3794 37-3795 37-3796 37-3797 37-3798 37-3799 37-3801
1+ 2.59 2.76 3.56 4.76 5.96 10.76 14.76 17.15 19.96 22.36 28.76 554001
554002
Adhesive Extru-Fix Cleaner SolventNot suitable for use on Based polystyrene, cellulose paint, vinyl and rayon Acrylic fabrics. Cement Adhesive
• Ideal for soft, hard, chipboard and plywood • Fast setting and extra strong • When glue has dried it forms a bond stronger than the wood itself • Resealable cap • Dries to a clear finish • Clog free nozzle • Anti-roll bottle with non-clogging twist cap • Developed for interior and
Weatherproof Wood Adhesive
exterior use
Pack size 125ml 250ml 500ml 1 litre 2.5 litres 5 litres
Order code 87-2670 87-4093 87-4094 87-4095 87-4096 87-2672
1+ 4.49 2.84 3.40 6.24 14.74 66.09
5+ 2.35 2.64 5.17 12.33 077528
Not suitable for outdoor applications. Cannot be used with ‘Perspex’ ME, SW or AG grades. Not suitable for fixing sheets of ‘Perspex’ face-to-face as crazing will occur. Type Adhesive cleaner
Order code 1+ 87-2334 3.32
6+ 3.22
Type Extru-Fix 500ml
Order code 1+ 87-2338 9.38
123077
Thin & Thick Balsa Packs • Length 450mm • 10x 1.6mm thick • 5x 2.4, 3.2, 4.8 and 6.4mm thick • Available in 75 and 100mm widths • Supplied in packs of 30 pieces
75mm width
100mm width
£17.69 £19.89 Order code 06-1221 Order code 06-1225 2
Tel: 01206 751166 Fax: 01206 751188
553945
Balsa Blocks Pack
• Length 450mm • 10x 25 x 25mm • 6x 25 x 50mm • Supplied as a pack of 16 pieces
£20.97 Order code 06-1235
48W Adjustable Temperature Analogue Soldering Station
Soldering Fume Filter
This no-nonsense, low-cost soldering station is ideally suited to applications where durability, physical size and budget are the main concerns. • Adjustable temperature from 150 to 450°C • Tip cleaning sponge included • Replaceable tips Solder station kit, 85-5914 also includes: • Helping hand assembly aid with magnifier • Desoldering pump • Lead-free solder wire (10g) • Solder aid kit (brush and scraper) • Two soldering tips The soldering iron may give off non-hazardous fumes for approximately 30 minutes on first use. Type 48W soldering station Replacement sponge Conical tip 0.5mm Conical tip 1.5mm Chisel tip 2mm Chisel tip 3mm 48W station + toolkit
Order code 85-5900 85-5910 85-5904 85-5902 85-5908 85-5906 85-5914
1+ 10+ 13.32 12.49 0.99 0.89 0.99 0.89 0.99 0.89 0.99 0.89 0.99 0.89 16.49
50+
100+
0.79 0.79 0.79 0.79
0.69 0.69 0.69 0.69
Helping Hands Assembly Aid with Magnifier
TCS, TC & SD irons
Not suitable for the larger Antex HP and Solbraze irons. Order code 1+ 5+ 10+ 85-4722 9.26 8.23 7.20 85-0584 0.94 539483
60/40 Tin/Lead FluxCored Solder Wire
Order code 85-5928
10+ 3.67
16 LED Magnifying Lamp with Helping Hands Type Magnifier + 3rd hand
25+ 3.29
Order code 1+ 85-5928 37.49 555833
• Supplied complete with 2.3mm bit and mains cable • Optional heat-proof silicone cable ideal for the educational environment • Optional fitted UK 13A or European mains plug • Slide-on hanging hooks for the irons are available separately
Type XS25W + plug XS25W + silicone cable + plug XS25W element XS25W hanging hook
Order code 85-1140 85-1145 85-0530 85-1147
1+ 5+ 10+ 20.99 19.49 18.99 21.99 20.99 19.99 7.20 6.81 6.67 0.43 030322
More irons & solder stations available at www.rapidonline.com
Lead-free Solder Wire
Rapid 60/40 Tin/Lead Solder Wire provides excellent solder joint reliability, superior joint strength and excellent thermal and mechanical fatigue resistance. It has a rosin-activated flux which requires little cleaning after making the solder joint. It is ideal for use in applications requiring good activation. • High grade 60/40 tin/lead alloy solder wire • Melting temperature 190°C • Recommended minimum bit temperature 300°C • Rosin activated flux manufactured to JISZ3283 Please note: This product contains lead and rosin. Order code 85-0592 85-0595 85-0610 85-0615
Order code 1+ 85-5930 3.89
A range of mains powered 25W soldering irons from Antex. • Inner ceramic shaft provides near-perfect insulation with virtually no leakage (3 to 5µA) • Outer stainless steel shaft for strength • Bits are held on the element shaft by an internal spring clip and simply slide on or off for changing
• Fits the Antex M, C, CS, XS,
£37.49
Order code 1+ 10+ 85-5920 17.49 16.49 85-5924 3.04 2.57
XS 25W Mains Powered Soldering Irons
Soldering Iron Stand
Type 100g 22SWG solder 500g 22SWG solder 500g 18SWG solder 2kg 18SWG solder
Type Fume filter ESD Pack of 2 filters
Only
525407
525406
Type ST6A iron stand Replacement sponge
A mains-powered unit for the filtration and removal of soldering and other fumes from the immediate vicinity of the user. The unit removes fumes safely and efficiently by drawing the air through replaceable carbon filters. Simply place the filter close to the work area and switch it on. • Adjustable angle • Supplied with 2 replaceable filters • ESD safe • 220 to 240V AC mains powered • Power 23W • Size 220 x 270 x 168mm (W x H x D)
1+ 5+ 10+ 3.99 3.63 3.42 17.12 16.11 15.10 16.61 15.60 14.59 50.45 48.43 46.41
This high purity lead-free tin/copper solder is a costeffective and versatile alternative to conventional lead solder and is suitable for all but the most demanding general purpose applications. • Tin alloy with 0.7% copper • Flux cored • Melting point 227°C • Available in 18SWG and 22SWG • Supplied on 100g or 500g reels Type 18SWG 100g reel 18SWG 500g reel 22SWG 100g reel 22SWG 500g reel
Order code 85-1162 85-1164 85-1166 85-1168
More solders available at www.rapidonline.com
1+ 5+ 10+ 4.49 4.29 3.99 21.95 19.95 18.95 4.49 4.29 3.99 22.95 20.95 19.95
072696
030236
www.rapidonline.com
[email protected]
3
Only
Only
£2.16
£0.89 per student!
per student!
Audio Amplifier Project Kits (pack of 20)
Moisture Tester Project Classpack (pack of 20)
Aimed at Key Stage 3, the audio amplifier project provides teachers with a stimulating and inexpensive project through which to study the subject of amplification. Teaching resources available for free download at www.rapidonline.com This schools projects package contains a comprehensive selection of components for schools working on audio related projects linked to the National Curriculum, this classpack of 20 projects offers a worthwhile saving on parts bought separately which is ideal for schools working to tight budgets.
A classpack of 20 kits of components to build a functional Moisture Tester that can tell if pot plants require water. The classpack contains all the electronic components required, including ready-made PCBs, in a Gratnell’s Tray with lid. It offers a substantial saving compared to parts bought separately. Students will love this Moisture Tester Project, which is linked to the National Curriculum, as it is simple to assemble and is ideal as an introduction to electronics.
£43.12 Order code 13-0106
From only
£17.86 Order code 13-0102
£0.57
per student!
Audio Amplifier Project Kits (pack of 20) This simple but interesting project has been designed by Rapid’s technical team for Key Stages 1, 2 & 3 students. It will help them to make a fully working mini-light from the parts supplied in this great kit. All the notes for making this kit are available as a free download from: www.rapidonline.com The classpack is supplied in a handy storage tray with lid, containing sufficient components for 20 mini-lights. Type Standard classpack White classpack Rainbow classpack Ultraviolet classpack Assorted classpack
Order code 13-0138 13-0155 13-0156 13-0157 13-0158
1+ 11.30 15.44 16.77 14.41 15.26 070957
Electronic Clock Kit
This wheel of fortune acts just like the game, just push the button and the 10 LEDs start showing a spinning action. They gradually slow down until the winning one remains lit. Requires 9V PP3 battery (not included).
Digital clock with red seven-segment displays in an attractive case. • Automatic time base selection (internal or net-frequency controlled 50/60Hz) • Internal time base with fine-tuning adjustment
MK194 FM Radio Kit
Electronic Dice Kit
This FM Radio Kit from Velleman will give you double the fun of learning to build and then listening to the FM radio. Suitable for beginners little or no previous knowledge of electronics.
Board games provide an excellent source of pleasant and healthy entertainment, and this dice kit will provide the players with even more fun.
£3.94 Order code 70-4058
From only
£3.15
per student!
Stereo Audio Amplifier Kit This project kit is a stereo version of our popular Audio Amplifier Project, 70-0180. Once assembled, the amplifier can be connected to MP3 players, laptops or any other device with a 3.5mm headphone jack socket. The kit contains all components, speakers, printed circuit board and connecting cable. It is available in packs of 5 kits or as a class pack of 20 kits. • Stereo version of the popular Audio Amplifier Project, 70-0180 • Can be connected to MP3 players, laptops or any other device with a 3.5mm headphone jack socket • Kit contains all components, speakers, printed circuit board and connecting cable • Available in packs of 5 kits or as a class pack of 20 kits Each kit requires a 9V, PP3 battery (not included). Type Pack of 5 Class pack of 20
Wheel of Fortune Kit
Order code 1+ 70-0198 16.92 70-0199 62.99 500601
£14.89 Order code 70-4037
£12.79 Order code 70-4166
£3.89 Order code 70-4014 MK120 Infrared Beam Kit The Infrared Beam Kit from Velleman will produce an IR light beam that can be used to monitor a doorway, a pathway, an area etc. for the arrival or presence of a person or object.
£4.89 Order code 70-4028 4
Tel: 01206 751166 Fax: 01206 751188
SERVO AND MOTOR CONTROL Servo / PWM Shield 16 Channel 12-bit I2C Interface for Arduino
Servo / PWM Driver 16 Channel 12-bit
Haptic Motor Controller (DRV2605L)
£12.95
£11.25
Order code 75-0558
£5.80
Order code 75-0565
Order code 75-0568
BLUETOOTH CONNECTIVITY Bluetooth Bluefruit EZ-Link for Serial & Arduino Programming
£16.50
Bluetooth Bluefruit LE Friend BLE 4.0 nRF51822
Bluetooth Bluefruit EZ-Link for HID Keyboard Controller
£14.58
Order code 75-0559
Bluetooth LE Sniffer BLE 4.0 nRF51822
£18.75
Order code 75-0584
Bluetooth Bluefruit Low Energy Breakout Board BLE 4.0
£21.79
Order code 75-0585
Order code 75-0586
£14.58
Order code 75-0589
SENSORS 3-Axis Accelerometer and Magetometer (Compass) Board
Barometric Pressure and Temperature Sensor I2C
9-DOF Absolute Orientation Inertial Measurement Unit IMU Breakout
£11.20
£7.20
£25.00
Order code 75-0582
Order code 75-0572
POWER MANAGEMENT PowerBoost 5V USB Boost 1000mA from 1.8V+
PowerBoost 5V USB Boost 500mA from 1.8V+
£10.85 Order code 75-0575
Capacitive Touch HAT for Raspberry Pi MPR121
Order code 75-0494
Push Button Power Switch Breakout
20mm Coin Cell Breakout with On Off Switch (CR2032)
£4.50 Order code 75-0577
£7.25
£2.50
Order code 75-0576
Order code 75-0566
MICRO Trinket 3V3 ATtiny85 Arduino Compatible
£4.98
Order code 75-0580
Trinket 5V ATtiny85 Arduino Compatible
Pro Trinket 5V ATmega328 16MHz Clock 28K FLASH 18 GPIO
£4.98
£7.92
Order code 75-0581
Order code 75-0509
www.rapidonline.com
[email protected]
5
Giant Teeth Demonstration Model
This model is ideal for demonstrating dental hygiene and tooth care. Can be manipulated manually in a hand-puppet fashion. • Toothbrush included for demonstration • Fun and educational • Size: 150 x 185 x 140mm • Suitable for Key Stages 1 & 2 (ages 5 to 11)
Trundle Wheel
£12.56 Order code 06-6764
Orbit Proview DNA Model • Understand the chemistry that controls life • Building the model engages and educates your students at the same time • Impressive display and teaching resource • 85cm high and 40cm wide • Includes set of wooden plates for suspending the model • Set on a suitable stand or hang from a suitable hook • Pupils can make up the subassemblies Please note that the Display Stand is sold separately and is not included with the models.
Laboratory Jack
£1.15
£56.99
Order code 52-4100
6
These Kimble Chase test tubes are manufactured from borosilicate glass tubing and can be used for a wide range of applications. They are designed for maximum heat transfer and chemical resistance. • Wall thickness between 0.8 to 1.0mm • 10 x 75mm, 16 x 125mm and 16 x 150mm tubes are supplied in packs of 100 • 24 x 150mm tubes are supplied in packs of 50 Order code 52-0176 52-0178 52-0180 52-0182 52-0184 52-0207
1+ 3.19 3.29 5.29 7.99 6.89 11.49
Type 10 x 75mm pk100 16 x 125mm pk 100 16 x 150mm pk 100 24 x 150mm pk 50
Order code 52-1895 52-1900 52-1897 52-1902
Order code 52-0656
A high quality scissor jack, ideal for accurate positioning of laboratory equipment, especially where adjustability is required. • Ideal for heavy or bulky objects in both the physics and chemistry laboratory • Stainless steel platform base and top • Smooth operation
Laboratory Retort Stand, Clamp and Bosshead Kit
Test Tubes and Boiling Tubes with Rims
Plastic Laboratory Measuring Beakers
£7.99
Order code 06-6620
502601
Type 50ml pk 12 100ml pk 12 250ml pk 12 500ml pk 12 1 Litre pk 6 5x 100 + 5x 250ml set
Order code 52-1618
Syringes
Order code 1+ 52-9009 94.55 52-9011 499.95 52-9013 30.70
Polypropylene measuring beakers with moulded graduations for ease of use. • 50ml, 100ml, 250ml and 500ml supplied in packs of 12 • 1 litre beakers supplied in packs of 6 • A mixed set of 10 containing 5x 100ml & 5x 250ml is also available
£7.29
Plastic syringes ideal for creating simple pneumatic or hydraulic systems. • 5ml capacity • Rubber seal gives effective push-pull action • Use with 3mm internal diameter tubing • Also suitable for general purpose dispensing of glues, compounds, etc. • Supplied in packs of 10
which are then brought together to make the finished model
Type Unassembled Assembled Display Stand
Bug Pots with Magnifying Lids Pack of 10 • Size 44 x 50mm dia. • 2.5x magnification • 5mm squares on base for sizing bugs
Measure intermediate distances with this robust and durable Trundle wheel. • Clicker can be adjusted to one of three positions: off, click every 10cm or click every metre • Splits into two parts for easy storage • Length 83cm • Supplied with carry bag and product guide
1+ 16.88 29.82 29.09 27.65 123522
This Laboratory Retort Stand Set is essential equipment for all science labs. The set comprises 1 each of Retort Stand Base, Rod, Clamp and Bosshead. The individual parts are also available separately. • Retort base 200 x 125mm • Rod 500 x 10mm diameter • Retort clamp 260 x 85mm • Retort clamp has rubber jaws and 3 prongs • Bosshead fits rods up to 16mm • Bases, rods and clamps are supplied singly • Bossheads are supplied in packs of 5 Colour of parts may vary from that shown. Type Complete kit Base (single) Rod (single) Clamp (single) Bossheads (pack of 5)
066655
Tel: 01206 751166 Fax: 01206 751188
Order code 13-0140 06-2123 52-2232 52-0140 52-0142
1+ 16.33 7.69 1.41 5.29 11.39 066646
H2Hybrid - Fuel Cell Automotive Trainer
Contains: 8x Hydrosticks Pro 1x Hydrofil Pro
This fuel cell automotive trainer from Horizon is the ultimate tool for exploring science and engineering concepts through hands-on activities via a working fuel cell car - understand hybrid vehicles like never before! An impressive array of hardware, software, and digital curricular materials allow for hours of activities for students, from high school vocational-technical up through college-level engineering.
• Engineer new solutions for optimisation of car’s performance Examine the three fields of energy management • Comprehend hybrid propulsion technology and work to minimise environmental impacts • Learn about data acquisition and discover how to manipulate,
analyse and interpret graphs and data gathered from the car on the
From only
£4,599.00 Order code 06-6615 road and on the bench Understand the expected performance of a fuel cell system and how to get optimum operation • Explore the difference between expected performance and experimental results Manufacturer’s part FCAT-30 Contact the education team for more information at:
[email protected]
From only
£93.43
£178.36
Digital Single Output Bench DC Power Supplies, HY3000M and HY5000M Series
Digital Triple Output Bench DC Power Supplies, HY3000M-3 Series
A range of Rapid Digital Single Output Bench The dual digital LED display meters display the actual voltage and current within 2.5 percent. DC Power Supplies from the HY3000M and HY5000M Series. These Linear Mode variable Output value can be set precisely, no more • DC power supplies are of very high quality floating construction. • Microprocessor control The ‘M’ version uses Microprocessor Technology • Lock-in voltage to allow the adjustment of the AMPS and VOLTS • Constant voltage and constant current with ‘TOUCH’ technology instead of dials. The • Serial and parallel tracking function (dual/ controls are splash and dirt resistant and when triple series only) set they cannot be changed accidentally. The • Voltage and current dual display range is variable voltage, and variable current, • Shining bright back light for LED display and suitable for the laboratory, science projects, • Last setting memorizing after power off universities and schools or any other use where • Available with output power of 0 to 3A or a stable voltage up to 30V or 50V is required. 0 to 5A • Available with output voltage of 0 to 30V or The voltage is variable from 0 to 30V for the 0 to 50V HY3000M and 0 to 50V for the HY5000M. The • Available models: HY3003M, HY3005M and current is also variable from 0 to 5A. HY5003M
A range of Rapid Power Supplies that belongs to the Triple Output HY3000M-3 Series. These power supplies have three independent output channels: two of them provide adjustable output of 0-30V and 0 to 3A or 0 to 5A, while the third has a fixed output of 5V DC 3A. Both series and parallel connections are possible allowing you to double the voltage or current. The highest output is the sum of twice the voltage value in series mode and the highest output current is the sum of twice the current value in parallel mode.
In the lower part of the HY3000M-3 front panel there are output terminals and earth connectors. Each output has its separate terminal group. The first two channels have an earth connector while the third does not. The device allows smooth adjustment of both parameters (current and voltage). Each output has a separate potentiometer. The ‘M’ version uses Microprocessor Technology to allow the adjustment of the AMPS and VOLTS with ‘TOUCH’ technology instead of dials.
Output Voltage0 to 30V Output Current 0 to 3A 1+
Output Voltage0 to 30V Output Current 0 to 5A 1+
Output Voltage0 to 30V Output Current 0 to 3A 1+
Output Voltage0 to 30V Output Current 0 to 5A 1+
Output Voltage0 to 50V Output Current 0 to 3A 1+
5+
5+
5+
£111.22 £120.36 £134.00 £93.43
Order code 85-1924
£101.10
Order code 85-1925
£112.56
Order code 85-1926
£212.32 £240.05 5+
£178.36
Order code 85-1927
5+
£201.65
Order code 85-1928
www.rapidonline.com
[email protected]
The controls are splash and dirt resistant and when set they cannot be changed accidentally. The range is variable voltage, and variable current linear, and suitable for the laboratory, science projects, universities and schools or any other use where a stable voltage up to 30V is required. • Microprocessor Control DC power supply • Lock-in voltage at your choice • Display type: 4x LED • Input voltage: 104 to 127V AC (60Hz), 207 to 253V AC (50Hz) • Ripple and noise: CV 0.5mVrms • Protection: Reverse polarity protection, current restricted, or short-circuit protection • The dual output can be connected in parallel or series, series voltage or parallel current is the sum value of dual output • Triple output with one fixed at 5V, 3A • Dimensions: 365 x 265 x 164mm • Available models: Rapid HY3003M-3 and HY3005M-3
7
ONLY
paradime
£34.99
Order code 25-0150
Load & Unload Filament buttons
3D Printer Da Vinci 2.0 Duo
The da Vinci 2.0 Duo from XYZprinting has been designed to create inventive designs and colourful, detailed prints. It is manufactured with a host of excellent features, including two extruders, allowing creativity of multi-colour projects via the different colour easy-to-install filament cartridges. • Technology: FFF (Fused Filament Fabrication) • Connectivity: USB 2.0 • Resolution: 100 – 400 microns Software: XYZware File types: .stl and XYZ Format (.3w) WindowsXP (.Net 4.0 Required)/ Windows 7 or above (for pc) Mac OSX 10.8/64-bit above (for Mac) • Dimensions: 18.4 x 20 x 22in (W x H x D)
£457.99 Order code 25-0157 £123.99 Order code 25-0159
1.75mm Filament Multipack (13 Colours x1M Lengths) Only
£0.82 Order code 25-0039
Speed Controller
Temperature Control
OLED Screen
SPECIAL OFFER
XYZprinting 3D Printer Da Vinci F1.0 Professional
This 3D printer from XYZprinting has been superbly designed and offers a fantastic opportunity for both novices and professionals to experience the new exciting technology of 3D printing. The open-source filament printer can be used for a wide range of tasks and projects, whether it's printing parts for research at a laboratory or dealing with multi-coloured projects requiring long print times.
FREE Paradime 3D Pen Order code 25-0150
£489.99
Order code 25-0154
Handheld 3D Scanner
This handheld 3D scanner from XYZprinting is fast in both scanning ability and processing speed. It allows for a 3.93 to 27.55in operating range with the wide scanning distance of 5.9 to 9.84in, and the quality resolution of 640 x 480 at 30FPS. It is designed with a compact, light body so you can move it around the desired target for scanning with ease. No large, complicated equipment necessary! The clip on the back of the scanner can also be used for a tablet/laptop, or any other one of your favourite devices for increased portability. • Data interface: USB 3.0 Scan resolution: 1.5mm Software: XYZscan / .stl, .obj Depth image size: 640 x 480 3.93 to 27.55in (10 to 70cm) • Scan volume • Head mode: 15.75 x 9.84 x 15.75in (40 x 25 x 40cm) (W x H x D) • Object mode: 23.6 x 23.6 x 11.8in (60 x 60 x 30cm) (W x H x D) • Dimensions: 1.61 x 6.18 x 2.4in (41 x 157 x 61mm) • Operating system: Windows 8.1 and above (32-bit and 64-bit)
Purchase a Da Vinci F1.0 Pro and get a
3D Printer Da Vinci Junior Wi-Fi
The printer has a host of rich features, including a self-calibrating function, allowing you to precisely print out your works without the need for tedious manualcalibration. Its quick-release extruder allows for convenient maintenance and replacement of the extruder at just the touch of a button! There is also the quick loading feature for speedy loading and unloading of your filament spool. The new PLA filaments are a non-toxic, biodegradable plastic that is recyclable and safe for the environment. The printer also consumes only 75W of power! Elsewhere, the XYZapp gives users the power to download and print free 3D designs from our online 3D design gallery, while sending your file to any Wi-Fi enabled 3D printer can be achieved from anywhere in the house.
£299.99 Order code 25-0158
3D Printer Idea Builder + Matter and Form 3D Scanner Bundle Save £85 with this money-saving 3D bundle deal! The Matter and Form MFS1V1 Desktop 3D Scanner paired with the Dremel 3D Printer Idea Builder gives you a complete scanning and printing solution - simply scan your chosen object and print it out in amazing 3D. • The Matter and Form MFS1V1 3D Scanner is the best consumer-rated 3D scanner, combining superior performance with intuitive usability and outperforming scanners costing 5x as much. The Dremel Idea Builder is easy to use straight out of the box. You’re ready to start building anything you need, anything you want, or anything the world has been waiting for. Click on the links below for full details: Matter and Form MFS1V1 Desktop 3D ScannerDremel 3D Printer Idea Builder
ONLY
£999.00
Orderline: 01206 751166 Fax: 01206 751188 Email :
[email protected] Rapid Education, Severalls Lane, Colchester, Essex C04 5JS E&OE. All content and images are subject to copyright and cannot be reproduced in any form without the express permission of Rapid Electronics Limited. Prices may vary, see website for up-to-date prices. For full terms & conditions visit www.rapidonline.com/terms M0515 03/16
All prices exclude VAT
Order code 25-0501
