Transcript
Orbiter
Video Projector Mount Rotates into Room
Orbiter video projector lifts. Select ( Model A/ Model B). Quiet 12V DC motor with adjustable limits. Double-pole, double-throw wall switch is standard, other control options available. Designed to be ceiling recessed. Can be installed on an angle, up to 90°. When activated, trapdoor flips, bringing the projector into the room. Factory set limit switches automatically stop travel at open and closed positions. Ceiling Panel finished white. Universal Projector Mounting Plate suits most projectors. Suits most projectors up to 26 lbs. Tilt, yaw and pan adjustments available—projector sits flush with ceiling. Maximum projector width is 17" for Model A, 207/8" for Model B. Suits base mounted projectors only. Please Note: The Orbiter should be specified in conjunction with a Draper video format motorized screen. Specifications subject to change without notice.
Closed Height
Height
W
idt
th
h
Le
Sc
Please Mark Appropriate Selections Select Orbiter Model Model A Model B
by
ng
Specifications—Orbiter
ree
n
How many? How many?
Orbiter—Dimensions
Select Optional Accessories
Optional Plenum Optional Angled Ceiling Adapter Optional ceiling access door to facilitate easier access after installation Ceiling access door, white painted finish Ceiling access door, accepts ceiling tile
Threaded Rod
Select Control Options:
Please Note: This Draper motorized mount comes with one double-pole, double-throw wall switch (silver wall plate with black rocker). Total number of wall switches ( switches operate independently) DC Motor Control (required for IR/RF/Serial/Network)* Radio Frequency Remote Control* How many? Optional 3-Button Up-Stop-Down Switch* How many? Infrared Remote Control* How many? Optional 3-Button Up-Stop-Down Switch* How many? R2D7 for Serial Communication* Optional 3-Button Up-Stop-Down Switch* How many? LS-100 for Network Communication* Optional 3-Button Up-Stop-Down Switch* How many? * Please Note: If unit is being operated using RF, IR, RS232 or Ethernet, but you still wish to have a wall switch, the standard double pole, double throw switch provided with the lift will not work. You must use the optional three-button up-stop-down switch.
Specifications
Model A
Height of Projector (inches)
Height of Projector (inches)
7"
5"
4" the point on the grid where the projecFind tor3"length and projector height intersect. If 2" intersection point falls within shaded areas 1" it is compatible with that size Orbiter. then 0 In addition, ensure projector is within width 0 2" listed 18" 20" 4" 6"in8"the 10"above 12" 14" 16" guidelines chart.
6" 5" 4" 3" 2" 1"
Length of Projector (inches)
0 0 2" 4" 6" 8" 10" 12" 14" 16" 18" 20" Length of Projector (inches) * A projector will fit into the Orbiter Model A if its dimensions are in the darkest area.
Orbiter—Operation Closed
Model B
Overall Size (w x l x h) 23" x 259/16" x 14" 27" x 29½" x 16" Overall Size with plenum 23" x 285/8" x 14" 27" x 329/16" x 16" *Ceiling Cutout Size (w x l) 187/8" x 20¾" 22¾" x 24¾" Net Weight of Unit 33 lbs. 37½ lbs. Lifting Capacity 26 lbs. 26 lbs. 10" Maximum Projector Width 17" 9" * 207/8" * *After Orbiter is installed in ceiling. 8" 7" 10" * Room for cable inputs must be consid9" 6" along with projector width or length. ered 8"
Ceiling
A projector will fit into the Orbiter Model A if its dimensions are in the darkest area.
In motion
Open
PROJECT:
A projector will fit into the Orbiter Model B if its dimensions are in the lightest shaded area.
ARCHITECT:
A projector will fit into the Orbiter Model B if its dimensions are in the lightest shaded area.
CONTRACTOR: SUPPLIER: Copyright © 2015 Draper Inc.
Form Orbiter_Sub15
Printed in U.S.A.
DATE:
REVISED:
Orbiter by Draper
Page 2 of 2 Orbiter—Dimensions 205/8"/52.4 cm (249/16"/62.4 cm)
221/4"/56.5 cm (263/16"/66.5 cm)
1815/16"48.1 cm (227/8"/58.1 cm)
259/16"/65 cm (291/2"/75 cm)
3"/7.6 cm (3"/7.6 cm)
7/8"/2.2 (7/8"/2.2
Please note: non-bracketed dimensions are for Model A; bracketed dimensions are for Model B.
41/4"/10.8 cm (41/4"/10.8 cm)
23"/58.4 cm (2615/16"/68.4 cm) 2011/16"/52.5 cm (245/8"/62.5 cm) 213/8"/54.3 cm (253/8"/64.5 cm)
cm cm)
1813/16"/47.8 cm (223/4"/57.8 cm) 193/8"/49.2 cm (235/16"/59.2 cm)
37/8"/9.8 cm (37/8"/9.8 cm)
Orbiter with Plenum Housing—Dimensions 1315/16"/35.4 (1515/16"/40.5
cm cm)
285/8"/72.7 cm (329/16"/82.7 cm)
215/16"/54.1 cm (251/4"/64.1 cm) 411/16"/11.9 cm (411/16"/11.9 cm) 3/4"/2 cm (3/4"/2 cm)
37/8"/9.8 cm (57/8"/14.9 cm) 3/4"/2 cm (3/4"/2 cm)
1813/16"/47.8 cm (227/8"/58.1 cm) 213/16"/7.1 cm (23/4"/7 cm) 193/8"/49.2 cm 5 19/16"/4 cm (23 /16"/59.2 cm) 9 (1 /16"/4 cm)
Knockout provided at each end for cable and power connections.
2011/16"/52.5 cm (245/8"/62.5 cm) 213/8"/54.3 cm (253/8"/64.5 cm) 23"/58.4 cm (2615/16"/68.4 cm)
13/16"/3 cm (13/16"/3 cm)
37/8"/9.8 cm (37/8"/9.8 cm)
51/2"/14 cm
Please note: non-bracketed dimensions are for Model A; bracketed dimensions are for Model B.
Wiring Diagrams Standard Switch Control RD
BN
BN
BL
BL
DC CONVERTER BK
OUTPUT: 12 VDC 1.25-1.5 Amp DASHED LINES INDICATE WIRES PROVIDED BY INSTALLER D2
LS2
*
D2
LS1
LS2
24 VDC MOTOR
WALL SWITCH (DPDT)
Wireless (RF, IR), RS232 and IP Control
D1
LS1
BL
BL
BN
BN
(-) (+)
WH 24 VDC MOTOR
D1
AUX PORT- For connecting multiple controls together (up to six totalconnect from AUX to Eye). DASHED LINES INDICATE WIRES PROVIDED BY INSTALLER
www.draperinc.com
DC CONVERTER OUTPUT: 12 VDC 1.25-1.5 Amp
Black wire with white type DC Motor Control EYE PORT- For IR EYE; RF Receiver or LED Switch. If more than one of these three is used with control, a splitter is required. DOWN - BLACK COM - WHITE UP - RED (765) 987-7999
WALL SWITCH 3 BUTTON
Please note: CE certification applicable on 220V units only.
