Transcript
1/2
order number: J80026A0047 STX IP20 RJ45 field assembly plug AWG22-26 Cat.6 Class EA, printed wire presorting acc. to PROFINET
Technical Attributes Short name
STX IP20 RJ45 plug Cat.6 Class EA
Remarks
AWG22-26, with printed wire presorting acc. to PROFINET, field assembly
Product description For the assembly of RJ45 patch cords Telegärtner offers RJ45 plugs using no special tools as well as for crimp termination. The RJ45 connectors acc. to IEC 60603-7 are available in several designs. The 8-way Cat.6A MFP8 connector for stranded and solid wire cables can easily be assembled onsite without any special tools. The maximum cable diameter is 9.0 mm. The connector features the T568 A/B or PROFINET pin assignment and a 360º shielding connection. An unshielded version of the 8-way Cat.6A UFP8 connector for stranded AWG27/7-22/7 or solid wire cables AWG24/1-22/1 can easily be assembled onsite without any special tools. The maximum cable diameter is 8.5 mm. The 8-way Cat.6A connector MP8 FS for stranded and solid wire cables completes the product line. Assembled with a crimp tool it offers shielding connection and a wire presorting for easy handling, too. The strain relief pressure is thereby absorbed by the cable jacket. This avoids deformation of wires. 1-part and 2-part cable boots in different colours are available additionally. Suitable crimp tools, one for less frequent usage (> 1.000 operations), the other for professional application (> 10.000 operations) round-off the product range. All connectors are capable for use in multiport-applications such as patch panels, switches, etc. Mechanical Characteristics Insertion force
≤ 30 N
Durability (mating cycles)
≥ 750
Material: connector housing
zinc diecast, nickel-plated
Material: carrier
PA UL94 V0
Material: contacts
tin bronze
© 2016 Telegärtner Karl Gärtner GmbH. Technische Änderungen vorbehalten. Technical changes reserved. www.telegaertner.com Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail:
[email protected]
2/2
Material: contact finish
min. 0.8 µm Au on 2 µm Ni
Material: shield
German silver
Material: contact IDC termination
tin bronze
Material: IDC termination finish
tin plated
Mating Requirements Cu-Conductor diameter: solid
0.41 - 0.64 mm AWG 26/1 - AWG 22/1
Mating Requirements Cu-Conductor diameter: stranded
0.48 - 0.76 mm AWG 26/7 - AWG 22/7
Core Diameter
0.85 - 1.6 mm
Cable diameter
5.5 - 8.5 mm
Electrical Characteristics PoE+ acc to IEEE 802.3at
fulfilled
Standards Generic cabling systems
ISO/IEC 11801; EN 50173-1:2007; ISO/IEC 24702; IEC 61918
Custom-designed cabling systems
PROFINET Installation Guideline
Connectors
IEC 60603-7-51
Transmission Characteristics 10 Gigabit Ethernet acc. to IEEE 802.3an
fulfilled
Class EA (Channel)
ISO/IEC 11801, DIN EN 50173-1
© 2016 Telegärtner Karl Gärtner GmbH. Technische Änderungen vorbehalten. Technical changes reserved. www.telegaertner.com Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail:
[email protected]
