Preview only show first 10 pages with watermark. For full document please download

Ordering Guide - Red Goat Disposers

   EMBED

Share

Transcript

ORDERING GUIDE E F F E C T I VE FE BR UAR Y 0 1 , 2 0 1 6 RED GOAT DISPOSERS ® HEAVY DUTY FOODWASTE DISPOSERS RED GOAT DISPOSERS 165 Independence Court, Lancaster, PA 17601 800-237-6628 ext. 181  •  Fax: 717-397-1997 www.redgoat.com QUALITY IS OUR PRIORITY RED GOAT DISPOSERS ® www.redgoat.com 2 Red Goat 2016 Ordering Guide TABLE OF CONTENTS Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Terms of Sale. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Disposer Line-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sizing/Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disposers: Basic & Mounting Options “F” Series – 6" Rotor: 1⁄2 to 11⁄4 HP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “A” Series – 8" Rotor: 11⁄2 to 5 HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “B” Series – 105⁄8" Rotor: 3 & 5 HP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “C” Series – 15" Rotor: 10 HP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 7 8 Supermarket & Special Application Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Controls: NEMA 4 Watertight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Remote Start-Stop Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Waterflow Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disposer Options and Adaptor Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disposer Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 & 13 Adaptor Kit Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 & 15 WARRANTY THE RED GOAT EXCLUSIVE ONE AND TEN YEAR WARRANTY ON F, A, B & C SERIES ONLY Product Confidence Unequalled in the Disposer Industry All products (and parts) manufactured and sold by RED GOAT DISPOSERS (the “Manufacturer”) are warranted to be free from defects in material and workmanship for a period of one year following the date of its initial installation or eighteen months from the date of shipment from the factory or factory warehouse, whichever expires first. Notice of a claim under this Warranty must be received by the Manufacturer at its offices before the expiration of such period in order for Warranty coverage of PARTS AND LABOR to apply. If notice of a claim is timely made, the Manufacturer will repair or replace the product or part which is defective either at the user’s facility or at the Manufacturer’s plant, as the Manufacturer shall decide. In addition, the Manufacturer warrants that the basic body components of every Red Goat Disposer will remain serviceable for a period of at least TEN YEARS. Should any of these basic body components require replacement during the first ten years of normal usage following installation the Manufacturer will furnish new duplicate parts to the original user at no charge. Manufacturer cannot warrant products returned to the factory not properly packaged, causing additional damage. This Warranty shall not apply to the extent that products or parts have been used other than in conformance with operating and maintenance instructions, subjected to misuse or abuse or damage by accident, act of God, abnormal use or stress or any other matter unrelated to the Manufacturter, and beyond its reasonable control or otherwise altered or modified by third parties. In addition, this Warranty does not cover normal wear items, such as sizing rings, impact bars and rotors. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED AND IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE. In no event shall the Manufacturer be liable for loss of use, revenue or profit or for indirect or consequential damages. All Red Goat machines are packed in heavy corrugated shipping containers suitable for reshipment. Red Goat Disposers is not responsible for any typographical errors. Due to continued product improvement, specifications are subject to change without notice. STANDARD ONE YEAR WARRANTY ALL RED GOAT disposer components, shown above in BLOCK print, are guaranteed against all defects for the initial ONE YEAR period of use, as stated in the Warranty. RED GOAT TEN YEAR WARRANTY ALL RED GOAT basic body components, shown above in italicized print, are guaranteed to remain serviceable for at least TEN YEARS, as stated in the Warranty. RED GOAT DISPOSERS ® Red Goat 2016 Ordering Guide www.redgoat.com TERMS OF SALE 1. NATURE OF DOCUMENT. This document constitutes the acceptance of the Red Goat Disposers Division of Somat Company (“Seller”) to sell the products specified on the reverse side (the “Products”) on the terms and conditions contained herein, however, acceptance is made expressly conditional on the Buyer’s agreement to all of the terms and conditions contained herein. Seller’s acceptance of a purchase order from the Buyer shall not constitute acceptance of any of the terms and conditions thereon which differ from these terms, except as the Seller may otherwise specify in writing. 2. TERMINATION AND CANCELLATION. Seller shall have the right to terminate and cancel the contract for sale of the Products at any time Seller determines that Buyer’s credit is not satisfactory. Any such termination or cancellation shall be effective upon notification (orally or in writing) to Buyer and shall be without liability to the Seller. Under no circumstances shall Buyer have the right to terminate the contract or cancel its order to purchase the Products, without written authorization by the Seller. All cancelled orders and returned goods will be subject to a minimum of 25% cancellation and/or restocking charge. Custom or modified units cannot be returned. 3. PRICES. Unless otherwise indicated, prices are F.O.B. Lancaster, PA and do not include any sales, use, excise or similar taxes or duties now or hereafter imposed. Errors or omissions in prices are subject to correction. 4. PAYMENT. Unless otherwise indicated, payment terms are net cash 30 days from date of shipment. In the event that the Buyer fails to make payment on time, Buyer shall be liable to Seller for the lesser of (a) 1.5% per month on the remaining balance or (b) the highest monthly interest rate which may lawfully be charged to Buyer. Buyer shall be liable for all expenses (including reasonable attorneys’ fees) incurred by Seller in collecting or attempting to collect any amounts due to Seller under the contract. 5. TITLE; RISK OF LOSS. Title to, and risk of loss of, the Products shall pass to Buyer upon the delivery of the Products F.O.B. Lancaster, PA to an agent of Buyer or to a common carrier. 6. INSPECTION. If, upon receipt of the Products by Buyer at the destination, the same shall appear not to conform to the order, Buyer shall within seven (7) days after receipt thereof, notify Seller of such condition and afford Seller a reasonable opportunity to inspect the Products and make the appropriate adjustments, repair or replacement. The remedies afforded under Section 7 below shall be exclusive for any defects discovered in the Products and which could have been discovered upon inspection. If the Seller is not so notified, the Buyer waives any recourse for those defects, and all warranty obligations of Seller regarding such obvious defects or deficiencies shall terminate. 7. LIMITED WARRANTIES AND REMEDIES. Seller warrants that, at the time of shipment, the Products will be free from defects in material and workmanship for a period of one year from the date of purchase by the initial user. Written notice of a claim under this warranty must be received by Seller before the expiration of such period in order for warranty coverage to apply. If notice of a claim is timely made, Seller will repair or replace the Product or part which is defective (at Seller’s sole option) either at the user’s facility or at Seller’s plant, as Seller shall decide. If Seller decides that a Product or part should be returned to its plant, the Buyer or user shall have the following obligations: (a) removal of any parts to be returned; (b) identification of all parts with tags stating the model number and serial number of the Products on which the part is used; (c) shipment of Products and/or parts, transportation prepaid, to Seller’s plant; (d) installation of the repaired or replaced Product or parts at user’s facility. This Warranty shall not apply to the extent that Products or parts have been used other than in conformance with operating or maintenance instructions, subjected to misuse or abuse, damaged by accident, act of God, abnormal use or stress or any other matter unrelated to Seller and beyond its reasonable control or altered or modified by third parties. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR PURPOSE. IN NO EVENT SHALL THE COMPANY BE LIABLE FOR LOSS OF USE, REVENUE OR PROFIT OR FOR ANY OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGE INVOLVING THE PRODUCTS. 8. LIMITATION OF LIABILITY. The liability of Seller arising out of the manufacture, sale, delivery, repair, or use of any of the Products shall not, in any event, exceed the cost of correcting defects or making replacement as required in the Limited Warranty and, upon the expiration of the Limited Warranty, all liability of Seller to Buyer shall terminate. 9. DELAYS. Neither party shall be liable for any delay or failure to perform any obligation to the other if such delay or failure shall be caused by an event or contingency beyond its reasonable control, irrespective of the nature thereof, however, the delaying party shall endeavor to correct such delay as soon as reasonably practicable. 10. MODIFICATION; ASSIGNMENT; APPLICABLE LAW; ENTIRE AGREEMENT. No modification of the terms and conditions specified in the contract shall be binding upon Seller unless agreed to by Seller in writing. The contract shall not be assigned by Buyer, nor may any of the duties of Buyer thereunder be delegated, without the written consent of Seller. Any such assignment or delegation without such consent shall be void. The contract shall be governed by, and construed in accordance with, the laws of the State of Pennsylvania. The provisions of the contract shall constitute the entire agreement of the parties with respect to the sale of the Products by Seller to Buyer and shall supersede all prior discussion and writings between the parties. 11. BINDING EFFECT OF CONTRACT. The contract shall be binding upon, and shall inure to the benefit of, the parties hereto and their respective successors and assigns. 12. RETURNS. No returns will be accepted without the prior approval of the Seller. A Return Authorization Number must be given by Seller prior to Products being shipped, freight prepaid, by Buyer. Any damage in transit to Products being returned is Buyer’s responsibility. All accepted returns are subject to a 25% or $25.00 minimum restocking charge. Returns that have been approved by Seller must be received within thirty (30) days after approval. Returns will not be considered after ninety (90) days from date of original notice. 13. INDEMNITY. Buyer agrees to indemnify, hold harmless and defend Seller from and against any and all liabilities and expenses arising out of any injury or damage which results from Buyer’s use, misuse, misapplication, failure to inspect, maintain or repair the Products which are the subject of this agreement. 14. MINIMUM ORDER. $75.00 net. 3 RED GOAT DISPOSERS ® www.redgoat.com 4 Red Goat 2016 Ordering Guide DISPOSER LINE-UP “F” Series “A” Series “B” Series “C” Series “F” SERIES “A” SERIES “B” SERIES “C” SERIES Disposing Rate (Lbs./Hr.) 300 900 1,500 3,000 Rotor Diameter (Inches) 6 8 10 ⁄8 15 ⁄ 2, 3⁄ 4, 1 1⁄ 4 11⁄2, 2, 3, 5 3, 5 10 Throat Opening (Inches) 1 4 ⁄2 4 ⁄2 & 7 7 7 Offset Throat Models NO YES YES YES Horsepower Sizes 1 5 1 SIZING / SELECTION CHART Use This Chart to Determine the Correct Disposer for Your Needs MEALS PER HOUR RECOMMENDED APPLICATION Churches Caterers Private Clubs Convenience Stores Bed & Breakfast Inns Airport Snack Bars Salad Sinks Schools Health Clubs Small Kitchens Vegetable Prep. Areas Nursing Care Facilities Salad Prep. Areas Pot Sinks Cafeterias Hospitals Universities Steak Houses Ship’s Galleys Central Shipping Areas Pre-Rinse Sinks Hotels Supermarkets Commissaries Cruise Ships Large Restaurants Resort Banquet Halls Central Dishwashers RECOMMENDED SERIES AND HORSEPOWER SERIES HP SERIES HP SERIES HP SERIES HP ⁄4 – – – – ⁄4 – – – – 1 75 F 1 ⁄2 F 3 150 F 3 ⁄4 F 3 300 F 3 ⁄4 F 1 ⁄4 500 F 1 1⁄ 4 F 1 1⁄ 4 900 – – A 1,500 – – 2,000 – – A 1 1 ⁄2 – – A 1 1⁄ 2 – – 1 1⁄ 2 A 3 B 3 A 2 A 5 B 5 A 3 B 3 B 5 2,800 – – – – B 5 C 10 3,500 – – – – – – C 10 4,400 – – – – – – C 10 6,000 – – – – – – C 10 HOW TO ORDER Step 1: Choose Basic Disposer model number (add adaptor from page 14 if required for a replacement disposer). Step 2: Choose Mounting Assembly Option (Sink or Cone). Step 3: Choose Switch or Control Center from page 10 or 11. EXAMPLE: F114S-R Basic Disposer H-C15 Mounting Assembly MS-1 Switch RED GOAT DISPOSERS ® Red Goat 2016 Ordering Guide www.redgoat.com “F” SERIES – 6" ROTOR 5 FREIGHT CLASS 65 Includes: • 6 Mounting Bolts • Splash Guard Gasket • Phases, Voltages and Hertz 1 Phase: 115/230V, 60Hz 3 Phase: 208-230/460V, 60Hz Regular (R) Design MODEL NO. F12P-R F12S-R F34P-R F34S-R F114P-R F114S-R DESCRIPTION SHIP WT. LBS. ⁄2 HP, 3 Phase, 4.5" Throat Size 55 1 ⁄2 HP, 1 Phase, 4.5" Throat Size 55 3 ⁄4 HP, 3 Phase, 4.5" Throat Size 55 3 ⁄4 HP, 1 Phase, 4.5" Throat Size 55 11⁄4 HP, 3 Phase, 4.5" Throat Size 60 60 11⁄4 HP, 1 Phase, 4.5" Throat Size • 1 Phase 115/230V, 60Hz or 110/220V, 50Hz • 3 Phase 208-230/460V, 60Hz or 190-220/380-440V, 50Hz FOR NEW INSTALLATION: For complete assembly in a new installation, Mounting Assembly, Switch or Control Center must be added to the Basic Disposer. Sink or Cone Assembly choices are listed below and Switch or Control Center choices are listed on pages 10 and 11. 1 “F” SERIES – 6" ROTOR, ASSEMBLY OPTIONS FREIGHT CLASS 65 SINK ASSEMBLY For regular sink attachment. Suspend from standard sink having a 31⁄2" to 4" diameter sink opening. Includes: • Mounting Head and Gaskets • Sink Stopper • 1⁄2" Solenoid Valve (specify voltage) • 3 GPM Flow Control Valve • 1⁄2" Vacuum Breaker Sink Stopper Mounting Head Gasket Solenoid Valve Flow Control Valve MODEL NO. H-RSA Vacuum Breaker DESCRIPTION Sink Assembly SHIP WT. LBS. 8 CONE ASSEMBLY For regular cone attachment. Suspends from cone welded to dishtable. Includes: • Stainless Steel Cone (choice of 12", 15" or 18") and Gasket • Water Swirl Inlet Valve • Vinyl Silver Saver Scrapping Ring • 1⁄2" Solenoid Valve (specify voltage) • 3 GPM Flow Control Valve • 1⁄2" Vacuum Breaker Inlet Valve Scrapping Ring Stainless Steel Cone Gasket Solenoid Valve MODEL NO. H-C12 H-C15 H-C18 Flow Control Valve Vacuum Breaker DESCRIPTION 12" Cone Assembly 15" Cone Assembly 18" Cone Assembly SHIP WT. LBS. 18 18 18 RED GOAT DISPOSERS ® www.redgoat.com 6 Red Goat 2016 Ordering Guide “A” SERIES – 8" ROTOR FREIGHT CLASS 65 Includes: • 41⁄2" or 7" dia. x 8" long Flexible Neoprone Connector Sleeve • 2 Stainless Steel Clamps • Phases, Voltages and Hertz 1 Phase: 115/230V, 60Hz 3 Phase: 208-230/460V, 60Hz Regular (R) Design 41⁄2" Throat Size Regular (R) Design 7" Throat Size Offset (O) Design 7" Throat Size MODEL NO. A112P-R4 or -R7 A112S-R4 or -R7 A2P-R4 or -R7 A2S-R4 or -R7 A3P-R4 or -R7 A5P-R4 or -R7 DESCRIPTION SHIP WT. LBS. 117 11⁄2 HP, 3 Phase, Specify 4.5" or 7" Throat Size 11⁄2 HP, 1 Phase, Specify 4.5" or 7" Throat Size 120 2 HP, 3 Phase, Specify 4.5" or 7" Throat Size 130 2 HP, 1 Phase, Specify 4.5" or 7" Throat Size 132 3 HP, 3 Phase, Specify 4.5" or 7" Throat Size 158 5 HP, 3 Phase, Specify 4.5" or 7" Throat Size 47 OFFSET DESIGN: For Offset Drum Option (7" Throat Size) Add 25 replace -R4 or -R7 with -07 at end of model number. FOR NEW INSTALLATION:  For complete assembly in a new installation, Mounting Assembly, Switch or Control Center must be added to the Basic ­Disposer. Sink or Cone Assembly choices are listed below and Switch or Control Center choices are listed on pages 10 and 11. “A” SERIES – 8" ROTOR, ASSEMBLY OPTIONS FREIGHT CLASS 65 SINK ASSEMBLY For regular sink attachment. Adjustable leg support. Includes: • Stainless Steel Sink Adaptor Ring • Vinyl Silver Trap Scrapping Ring • 1⁄2" Solenoid Valve (specify voltage) • 8 Phase GPM Flow Control Valve • 1⁄2" Vacuum Breaker Scrapping Ring Sink Adaptor Solenoid Valve Flow Control Valve MODEL NO. A-RSA4 A-RSA7 Vacuum Breaker DESCRIPTION Sink Assembly for 4.5" Diameter Throat Size Sink Assembly for 7" Diameter Throat Size SHIP WT. LBS. 5 6 CONE ASSEMBLY For regular cone attachment. Adjustable leg support. Includes: • Stainless Steel Cone (choice of 12", 15" or 18") and Gasket • Water Swirl Inlet Valve • Vinyl Silver Saver Scrapping Ring • 1⁄2" Solenoid Valve (specify voltage) • 8 GPM Flow Control Valve • 1⁄2" Vacuum Breaker Inlet Valve Scrapping Ring Stainless Steel Cone Gasket Solenoid Valve Flow Control Valve Vacuum Breaker MODEL NO. A-C412 A-C415 A-C418 A-C712 A-C715 A-C718 DESCRIPTION For 4.5" Throat Size: 12" Cone Assembly 15" Cone Assembly 18" Cone Assembly For 7" Throat Size: 12" Cone Assembly 15" Cone Assembly 18" Cone Assembly SHIP WT. LBS. 18 18 18 18 18 18 RED GOAT DISPOSERS ® Red Goat 2016 Ordering Guide www.redgoat.com “B” SERIES – 105⁄8" ROTOR 7 FREIGHT CLASS 65 Includes: • 7" dia. x 8" long Flexible Neoprone Connector Sleeve • 2 Stainless Steel Clamps • All 7" Diameter Throat Size • Phases, Voltages and Hertz 208-230/460V, 60Hz 190/380V, 50Hz Regular (R) Design Offset (O) Design MODEL NO. B3P-R B5P-R DESCRIPTION SHIP WT. LBS. 3 HP, 3 Phase 210 5 HP, 3 Phase 220 OFFSET DESIGN: For Offset Drum Option replace -R with -0 at end Add 35 of model number. FOR NEW INSTALLATION: For complete assembly in a new installation, Mounting Assembly, Switch or Control Center must be added to the Basic Disposer. Sink or Cone Assembly choices are listed below and Switch or Control Center choices are listed on pages 10 and 11. “B” SERIES – 105⁄8" ROTOR, ASSEMBLY OPTIONS FREIGHT CLASS 65 SINK ASSEMBLY For regular sink attachment. Adjustable leg support. Includes: • Stainless Steel Sink Adaptor Ring • Vinyl Silver Trap Scrapping Ring • 1⁄2" Solenoid Valve (specify voltage)* • 3 GPM Flow Control Valve • 10 GPM Control Valves • 1⁄2" Vacuum Breaker* Scrapping Ring Sink Adaptor Solenoid Valve Flow Control Valve MODEL NO. B-RSA Vacuum Breaker * For 3⁄4" option, see page 11. DESCRIPTION Sink Assembly SHIP WT. LBS. 6 CONE ASSEMBLY For regular cone attachment. Adjustable leg support. Includes: • Stainless Steel Cone (choice of 12", 15" or 18") and Gasket • Water Swirl Inlet Valve • Vinyl Silver Saver Scrapping Ring • 1⁄2" Solenoid Valve (specify voltage)* • 3 GPM Flow Control Valve • 10 GPM Flow Control Valves • 1⁄2" Vacuum Breaker* Inlet Valve Scrapping Ring Stainless Steel Cone Gasket Solenoid Valve MODEL NO. B-C12 B-C15 B-C18 Flow Control Valve Vacuum Breaker * For 3⁄4" option, see page 11. DESCRIPTION 12" Cone Assembly 15" Cone Assembly 18" Cone Assembly SHIP WT. LBS. 18 18 18 RED GOAT DISPOSERS ® www.redgoat.com 8 Red Goat 2016 Ordering Guide “C” SERIES – 15" ROTOR FREIGHT CLASS 65 Includes: • 7" dia. x 8" long Flexible Neoprone Connector Sleeve • 2 Stainless Steel Clamps • All 7" Diameter Throat Size • Phases, Voltages and Hertz 208-230/460V, 60Hz 190/380V, 50Hz Regular (R) Design Offset (O) Design MODEL NO. C10P-R DESCRIPTION SHIP WT. LBS. 10 HP, 3 Phase 210 OFFSET DESIGN: For Offset Drum Option replace -R with -0 at end 40 Add of model number. FOR NEW INSTALLATION: For complete assembly in a new installation, Mounting Assembly, Switch or Control Center must be added to the Basic Disposer. Sink or Cone Assembly choices are listed below and Switch or Control Center choices are listed on pages 10 and 11. “C” SERIES – 15" ROTOR, ASSEMBLY OPTIONS FREIGHT CLASS 65 SINK ASSEMBLY For regular sink attachment. Adjustable leg support. Includes: • Stainless Steel Sink Adaptor Ring • Vinyl Silver Trap Scrapping Ring • 1⁄2" Solenoid Valve (specify voltage)* • 3 GPM Flow Control Valve • 10 GPM Control Valves • 1⁄2" Vacuum Breaker* Scrapping Ring Sink Adaptor Solenoid Valve Flow Control Valve MODEL NO. C-RSA Vacuum Breaker * For 3⁄4" option, see page 11. DESCRIPTION Sink Assembly SHIP WT. LBS. 6 CONE ASSEMBLY For regular cone attachment. Adjustable leg support. Includes: • Stainless Steel Cone (choice of 12", 15" or 18") and Gasket • Water Swirl Inlet Valve • Vinyl Silver Saver Scrapping Ring • 1⁄2" Solenoid Valve (specify voltage)* • (2) 10 GPM Flow Control Valves • 1⁄2" Vacuum Breaker* Inlet Valve Scrapping Ring Stainless Steel Cone Gasket Solenoid Valve MODEL NO. C-C12 C-C15 C-C18 Flow Control Valve Vacuum Breaker * For 3⁄4" option, see page 11. DESCRIPTION 12" Cone Assembly 15" Cone Assembly 18" Cone Assembly SHIP WT. LBS. 18 18 18 RED GOAT DISPOSERS ® Red Goat 2016 Ordering Guide www.redgoat.com SUPERMARKET TABLES AND SPECIAL APPLICATION TABLES 9 FREIGHT CLASS 65 HOSTILE ENVIRONMENT TABLE Self-contained, pre-wired, pre-plumbed, portable, quick disconnect table for drilling platforms, off-shore salt water use. Includes “HC” - hard chrome option. Meets MARPOL Standard. • TABLE: All stainless steel 316L having 3" lip top, 18" cone with water swirl inlet valve and lifting eyes, hinged cover, pallet type base for fork lift transport. Includes full enclosure stainless steel panels. • COMPONENTS (PLUMBING/ELECTRICAL): All pre-plumbed and ­ pre-wired, NEMA4X solenoid valve & automatic reversing control panel with emergency disconnect switch (RAC2) • (2) 3 GPM flow controls • MOTOR: Totally enclosed, fan cooled • OVERALL DIMENSIONS: 28" wide x 22" deep x 37" high Specify Voltage when ordering MODEL NO. A2P-THE A3P-THE A5P-THE A2P-R7HE A3P-R7HE A5P-R7HE DESCRIPTION Standard Power, 2 HP, 3 Phase, 7" Throat Size Heavy Waste, 3 HP, 3 Phase, 7" Throat Size Heavy Waste, 5 HP, 3 Phase, 7" Throat Size BASIC DISPOSER ONLY: 2 HP, 3 Phase, 7" Throat Size (Includes “HC” - Hard Chrome Option) 3 HP, 3 Phase, 7" Throat Size (Includes “HC” - Hard Chrome Option) 5 HP, 3 Phase, 7" Throat Size (Includes “HC” - Hard Chrome Option) SHIP WT. LBS. 355 385 400 135 165 180 FAST FEED STATION Self-contained, free standing design not for undercounter use. • TABLE TOP: Stainless Steel: 30" wide x 30" deep, with 2" upturned lip Feed Opening: 14" x 22" on“C” Series • FEED HOPPER: Thick walled cast aluminum, mounts to disposer by use of quick-release head clamps. Provides fast access to disposer without the use of tools. • COMPONENTS (PLUMBING/ELECTRICAL): Water spreader inlet, 24" flexible hose, 1⁄2" solenoid valve, (2) 10 GPM water flow control valves, (1) 1⁄2" vacuum breaker. • OVERALL DIMENSIONS: 30" wide x 30" deep x 351⁄2" high MODEL NO. C-10P-FS DESCRIPTION Heavy Waste, 10 HP, 3 Phase, 9" x 12" Throat Size SHIP WT. LBS. 400 RED GOAT DISPOSERS ® www.redgoat.com 10 Red Goat 2016 Ordering Guide CONTROLS: NEMA 4 WATERTIGHT ON-OFF SWITCHES – Non-Reversing Specify HP, Voltage and Phase when ordering Manual Contact MODEL NO. MS-1 MS-2 MC Magnetic Contactor DESCRIPTION ⁄2 to 2 HP Range, 1 Phase 1 ⁄2 to 2 HP Range, 3 Phase MAGNETIC CONTACTOR: 1 ⁄2 to 10 HP Range 1 SHIP WT. LBS. 4 4 3 ON-OFF SWITCHES – Manual Reversing Specify HP, Voltage and Phase when ordering Drum Switch MODEL NO. RMS-2 RMS-3 RMS-5 DESCRIPTION DRUM SWITCH: 1 ⁄2 to 11⁄2 HP, 115 Volts, 1 Phase 1 ⁄2 to 2 HP, 230 Volts, 1 Phase 1 ⁄2 to 2 HP, 208-230/460 Volts, 3 Phase 3 HP, 208-230/460 Volts, 3 Phase 2 HP, 115 Volts, 1 Phase 5 HP, 208-230/460 Volts, 3 Phase SHIP WT. LBS. 3 5 7 CONTROL PANELS • • • • NEMA4X Watertight Fiberglass Enclosure Reversing Magnetic Contactor Low Voltage Solid State Control Circuit Thermal Protector with Reset for 10 HP “C” Series (“F”, “A” & “B” Series have thermal protector on motor) • Terminal Connection for 24 Volt Solenoid Valve • RAC1 – Start-Stop Buttons on Front Door • RAC2 – Illuminated Start-Stop Buttons on Front Door • RAC2 – Emergency Disconnect Switch • Time Delay 2 Minute Clean Out Cycle Specify HP, Voltage and Phase when ordering RAC1 Control Center Automatic Reversing MODEL NO. RAC1 RAC1 RAC2 RAC2 EM RAC2 Control Center Automatic Reversing DESCRIPTION ⁄2 to 5 HP Range for “F”, “A” & “B” Series Disposers (without overload relay) 10 HP for “C” Series Disposers (with overload relay) 1 ⁄2 to 5 HP Range for “F”, “A” & “B” Series Disposers (without overload relay) 10 HP 0for “C” Series Disposers (with overload relay) Conserves water and electricity usage by limiting disposer run time to a preset interval. Specify 5 to 15 minutes. Available for RAC1 and RAC2 series controls only. 1 SHIP WT. LBS. 20 20 20 20 – RED GOAT DISPOSERS ® Red Goat 2016 Ordering Guide www.redgoat.com 11 REMOTE START-STOP SWITCH • For RAC1 and RAC2 Control Centers RS Remote Start-Stop Switch MODEL NO. RS PF DESCRIPTION Remote NEMA4X Watertight Start-Stop Switch: Allows panel to be located at a distance away while Start-Stop Switch can be mounted near disposer. Includes remote circuitry in panel and NEMA4X watertight remote switch. Positive Flush: After motor stops, water continues running for 2 minutes, flushing waste chamber and drainline. SHIP WT. LBS. 4 – WATERFLOW COMPONENTS: Included with every Red Goat Mounting Assembly Solenoid Valve Vacuum Breaker MODEL NO. Water Flow Control Valve DESCRIPTION SHIP WT. LBS. SOLENOID VALVE (Specify Coil Voltage when ordering) 05-5-154 05-5-152 05-5-155 05-5-151 05-5-153 05-5-154H 1 10-5-201 10-5-202 1 10-H-303 10-AB-308 10-C-310 1 2 2 2 2 2 2 ⁄2" Pipe Size, 24 Volt Coil (Must be used with RAC1 and RAC2) 1 ⁄2" Pipe Size, 120 Volt Coil 1 ⁄2" Pipe Size, 208 Volt Coil 1 ⁄2" Pipe Size, 240 Volt Coil 1 ⁄2" Pipe Size, 480 Volt Coil 3 ⁄4" Pipe Size, 24 Volt Coil (Must be used with RAC1 and RAC2) VACUUM BREAKER 2 2 ⁄2" Pipe Size 3 ⁄4" Pipe Size WATER FLOW CONTROL VALVE 2 2 2 ⁄2" Pipe Size, 3 GPM 3 ⁄4" Pipe Size, 8 GPM 3 ⁄4" Pipe Size, 10 GPM DISPOSER OPTIONS AND ADAPTOR KITS DESCRIPTION HARD CHROME OPTION “HC” For Hard Chrome Option (includes 4 impact bars on “C” Series), add HC to the end of disposer model number 3 “A” SERIES “C” SERIES Add – Add – ⁄4" SOLENOID VALVE OPTION Only available in 24 volt solenoid valves 3 Add ⁄4" VACUUM BREAKER OPTION Available in all mounting assembly options CORRECTIONAL FACILITY OPTION “CP” Special features to meet correctional facility requirements. Standard package with tamper proof fasteners and Disposer THROAT RESTRICTOR Plate. Add CP to model number. Other correctional options available. Call factory for details. DISPOSER MOUNTING CONTROL ADAPTOR KITS Adaptor Kits are available to allow installation of a Red Goat Disposer to virtually any sink or cone size or configuration. Refer to “Adapter Kit Selection Guide” (pages 14 & 15) for specific kit model numbers. Note: Part nos. 06-5-846 & 06-5-847 are Band Type MULTIPLE RING TYPE BAND TYPE RED GOAT DISPOSERS ® www.redgoat.com 12 Red Goat 2016 Ordering Guide DISPOSER ACCESSORIES MODEL NO. DESCRIPTION SHIP WT. LBS. VINYL SILVER TRAP SCRAPPING RING • Reduces Silverware Loss • Reduces Disposer Backsplash 06-HA-ST4 06-ABC-ST7 2 3 Fits 41⁄2" Throat Size Fits 7" Throat Size NEOPRENE CONNECTOR SLEEVE • Provides a Dampening Shock-Absorbing Disposer Connection 06-A-414 06-A-818 06-ABC-434 06-ABC-834 2 2 3 3 41⁄2" Diameter x 4" Length 41⁄2" Diameter x 8" Length 7" Diameter x 4" Length 7" Diameter x 8" Length STAINLESS STEEL CLAMPS • Securely Fastens Neoprene Connector Sleeve to both Disposer and Cone/Sink • Features Quick Disconnect Design 08-A-19 08-ABC-33 1 1 Fits 41⁄2" Throat Size Fits 7" Throat Size SINK ADAPTOR • Provides a 1" All-Around Lip for Welding to Sink • Spun Stainless Steel 04-A-104 04-ABC-107 2 2 Fits 41⁄2" Throat Size Fits 7" Throat Size WATER SWIRL INLET VALVE • Chrome Plated • Fixed Elbow Design Provides Water Swirl for Waste Feeding 10-5-701 1 1 ⁄2" Tubing Size CONE COVER • Allows Waste Sorting • Further Reduces Splashback and Increases Work Area 30-5-212 30-5-215 30-5-218 Fits 12" Cone Fits 15" Cone Fits 18" Cone 4 4 5 RED GOAT DISPOSERS ® Red Goat 2016 Ordering Guide DISPOSER ACCESSORIES www.redgoat.com 13 (continued) MODEL NO. DESCRIPTION SHIP WT. LBS. CONE HOPPER • Spun 16 Gauge Stainless Steel • 1" All-Around Top Lip for Welding into Stainless Steel Table • Includes Water Swirl Inlet Valve, Part #10-5-701 30-H-124 30-H-154 30-H-184 30-A-124 30-A-154 30-A-184 30-ABC-127 30-ABC-157 30-ABC-187 12" Cone, 41⁄2" Throat Opening for F Series 15" Cone, 41⁄2" Throat Opening for F Series 18" Cone, 41⁄2" Throat Opening for F Series 12" Cone, 41⁄2" Throat Opening for A Series 15" Cone, 41⁄2" Throat Opening for A Series 18" Cone, 41⁄2" Throat Opening for A Series 12" Cone, 7" Throat Opening for A, B and C Series 15" Cone, 7" Throat Opening for A, B and C Series 18" Cone, 7" Throat Opening for A, B and C Series 4 6 7 4 6 7 4 6 7 SPRAY RINSE WITH WALL BRACKET • Chrome Plated Flat Deck Mount Design • Dual Level Energy Efficient Control Permits Quick Water Temperature • Large Non-Slip Spray Valve • Spring Loaded Goose Neck with Storage Hook • Adjustable (from 2" to 63⁄4") Wall Bracket Provides Rigid Installation 10-5-502 10-5-503 10 10 Fisher Brand (No. 2110/2902) T & S Brand (No. B-113/B-109) DEJAMMING WRENCH • High Strength, Steel Welded Construction, Enamel Finish • Placement over Rotor Impact Bar, with Slight Manual Turning in Either Direction, will Loosen Jam 30-5-220 26" Long, 16" Wide Handle 8 RED GOAT DISPOSERS ® 14 www.redgoat.com Red Goat 2016 Ordering Guide ADAPTOR KIT SELECTION GUIDE 1 PRESET CONE OR SINK STYLE Common Sink 2 3 4 5 6 7 8 9 COMMONLY USED BY Many A - DIA. SINK OR CONE OPENING B - DIA. OUTSIDE FLANGE 31⁄2" - 4" – 1 In-Sink-Erator, National, Toledo, Waste King 41⁄2" 51⁄8" 3 Waste King 41⁄2" 5" - 51⁄8" 2 Big Genie, Insinger, In-Sink-Erator, National, Waste King 41⁄2" 61⁄2" 1 Avant, FMC 45⁄8" 51⁄8" 2 FMC 5" 61⁄2" 1 Avant, FMC 5 ⁄4" 511⁄16" 3 Avant, FMC 51⁄4" 511⁄16" 3 Waste King 6" 61⁄2" 1 Waste King 6" 61⁄2" 1 Bus Boy 6" 63⁄4" 3 Bus Boy 6" 7" 1 In-Sink-Erator, Toledo 6" 7 ⁄16" 2 American Delphi, Atomic 6" 71⁄2" 3 In-Sink-Erator, Toastmaster 65⁄8" 71⁄8" 1 Big Genie, Hobart, National, Toledo 7" 73⁄8" 3 Big Genie, Hobart, National, Toledo 7" 73⁄8" 1 Salvajor 7" 73⁄4" 2 Hobart, National 7" 81⁄2" 3 Waste King 8" 83⁄8" 1 In-Sink-Erator, Toledo 8" 91⁄4" 2 Hobart 9" 121⁄8" 6 Bus Boy, Hobart, Kitchen Pig, Salvajor 4 ⁄2" – 6 Waste King 4 ⁄2" – 5 Waste King 41⁄2" – 4 Hobart 5" – 8 Insinger 4 ⁄2" – 9 Salvajor 47⁄16" – 7 Hobart 5" – 7 Bus Boy, Waste King 5 ⁄8" – 7 Bus Boy, Waste King 57⁄8" – 7 General Electric 6" – 8 Waste King 6" – 1 1 1 1 7 3 9 Blakeslee, Salvajor 6 ⁄8" - 7" – 9 Insinger 61⁄2" - 65⁄8" – 8 Master 77⁄8" - 81⁄2" – 7 1. Disconnect existing disposer from cone or sink; this will aid in obtaining precise measurements. 2. Selecting from the illustrations at left, chooose the style that most closely resembles your present cone or sink (either 1, 2, 3, 4, 5, 6, 7, 8 or 9). 3. Carefuly take the measurements, as shown in the illustration, for the style selected. 4. Find the line containing these measurements in the chart above. 5. Select the appropriate Adapter Kit number, being sure it corresponds to the Red Goat Replacement Disposer Series chosen. NOTE: For Adaptor Kits to fit sizes or styles of cones not shown on this chart, please contact our factory. (Allow an extra two weeks delivery time for special Adaptor Kits.) RED GOAT DISPOSERS ® Red Goat 2016 Ordering Guide www.redgoat.com 15 ADAPTOR KIT SELECTION PROCEDURE (continued) ADAPTER KIT NO. C - DIA. INSIDE BEND D - DIA. BOLT HOLE CIRCLE NUMBER OF BOLTS – – – – – – “F” SERIES “A” SERIES 41⁄2" THROAT SIZE “A”, “B”, “C” SERIES 7" THROAT SIZE – 30-H-RSA 40-UV-45A **40-UV-7ABC – 40-N-40H 40-N-45A **40-N-7ABC *51⁄2" 6 – 40-W4-45A **40-W4-7ABC Reuse ring for “A”, “B” and “C” Series. No Adapter needed for “F” Series. 5 ⁄2" 6 – 40-W4-45A **40-W4-7ABC No Adapter needed for “F” Series. 1 – – – 40-N-40H 40-N-45A **40-N-7ABC – 6" 6 40-FM-40H 40-FM-45A **40-FM-7ABC – – – 40-FM-40H 40-FM-45A **40-FM-7ABC SPECIAL INSTRUCTIONS – *6" 6 40-FM-40H 40-FM-45A **40-FM-7ABC – *7" 6 40-WK-40H 40-WK-45A 06-5-846 Discard existing ring. Band Adapter 1⁄4" thick. – – – 40-BB-40H 40-BB-45A 06-5-847 Band Adapter 1⁄2" thick. – – – 40-BB-40H 40-BB-45A 06-5-847 Band Adapter 1⁄2" thick. – *71⁄2" 6 40-BB-40H 40-BB-45A 06-5-847 Discard existing ring. Band Adapter 1⁄2" thick. – – – 40-BB-40H 40-BB-45A 40-IS-7ABC – 6 ⁄4" 6 40-HO-40H 40-HO-45A 40-HO-7ABC – *81⁄8" 6 40-IS-40H 40-IS-45A 06-5-846 – – – 40-HO-40H 40-HO-45A 40-HO-7ABC – *8 ⁄16" 10 40-HO-40H 40-HO-45A 40-HO-7ABC 3 1 Reuse existing ring. Discard existing ring. Reuse existing ring. – – – 40-HO-40H 40-HO-45A 40-HO-7ABC – 81⁄16" 10 40-HO-40H 40-HO-45A 40-HO-7ABC – – – 40-W8-40H 40-W8-45A 40-W8-7ABC – – – 40-I8-40H 40-I8-45A 40-I8-7ABC – 111⁄8" 8 40-H9-40H 40-H9-45A 40-H9-7ABC 67⁄8" *51⁄2" 6 – 40-W4-45A **40-W4-7ABC 6" - 6 ⁄2" 1 *5 ⁄2" 6 – 40-W4-45A **40-W4-7ABC 6" - 61⁄2" 51⁄2" 6 – 40-W4-45A **40-W4-7ABC No Adapter needed for “F” Series. 7 5 ⁄8" – – 40-H5-40H 40-H5-45A **40-H5-7ABC Requires drilling mounting holes (template inc.). – – – Not Available – ** – – – Not Available – ** 57⁄8" – – 40H5-40H 40-H5-45A 06-5-847 6 ⁄2" – – 40-GE-40H 40-GE-45A 40-B5-7ABC 1 1 6 ⁄8" – – 40-GE-40H 40-GE-45A – 63⁄8" – – 40-GE-40H 40-GE-45A 40-GE-7ABC – – – Not Available Not Available 06-5-847 7 – – – 40-SA-40H 40-SA-45A – – – – 40-SA-40H 40-SA-45A – – – – Not Available Not Available 40-M-7A *Bolt circle in unattached mounting ring. Discard existing ring. Reuse existing ring. No Adapter needed for “F” Series. No Adapter needed for “A” Series with 41⁄2" throat size. No Adapter needed for “A”, “B” or “C” Series with 7" throat size. No Adapter needed for “A”, “B” or “C” Series with 7" throat size. No Adapter needed for “B” or “C” Series with 8" lid opening. **Not recommended due to large difference in diameter of disposer throat and sink or cone. Project:______________________________________________ Item No.___________________________________________ Quantity___________________ MODEL F RED GOAT DISPOSERS ® DISPOSER APPLICATION: Small restaurant kitchen or salad prep areas in large kitchen. Snack bars, schools and churches where food waste is light and volume is not great. DESIGN AND CONSTRUCTION: • Motor: Reversing, heavy duty, T.E.F.C., 1725 RPM (1425 RPM, 50 Hz), full rated horsepower, double sealed, permanently lubricated ball ­bearings. • Housings: Heavy aluminum grind and discharge housings. Four bolts fasten the motor unit to the grind chamber, permit easy removal. • Mounting: Disposer suspends from Cone or Sink Assembly. • Stationary Shredder Ring: 13⁄4" high, 4 machine ground primary action breaker bars, 42 secondary action grinding teeth. • Flywheel: Breaker blade, mounted at center, speeds grinding, prevents objects from “riding” at center. Two hardened stainless steel cutter blocks (fastened to flywheel with nylock screws) are replaceable, can be indexed for new cutting edges. Ni-Resist flywheel is 63⁄8" diameter, slots undercut the shredder ring to assure that particles are cut to proper size before passing to the drain line. Tight tolerance in the cutting mechanism allows for approximately 1⁄8" or 3.175 mm or less of waste to pass through to sanitary. • Motor Shaft Seal: Proprietary mechanical seal designed for quality, long life, and reliability. • Drain Connector: A chrome plated brass tail-piece is provided for connection to a 11⁄2" standard drain trap. “F” Series Basic Disposer CONTROLS: “F” SERIES - BASIC DISPOSER Type REGULAR Model No. HP PH Throat Size NOTE: Electrical switches or control centers not included, must be selected as required. F12S-R 1 ⁄2 1 4 1⁄ 4" PLUMBING: F12P-R ¹⁄2 3 4 1⁄ 4" F34S-R 3 ⁄4 1 4 ⁄ 4" F34P-R 3 ⁄4 3 4 1⁄ 4" • 3 GPM @ 20 PSIG, 1⁄2" NPT • 11⁄2" drain line with trap • Not grease trap compliant F114S-R 1 1⁄ 4 1 4 1⁄ 4" F114P-R 1 ⁄4 3 4 1⁄ 4" 1 1 ELECTRICAL: • Please refer to electrical requirements on the last page. OPTIONAL FEATURES: • Adaptor Kits: Adaptor kits are available to allow installation of Red Goat Disposers to virtually any sink or cone size or configuration. Refer to “Adaptor Kit Selection Guide” for specific kit model numbers. SO60413 (04/16) Page 1 of 2 MODEL F RED GOAT DISPOSERS ® DISPOSER *These items are not supplied by Red Goat Disposers. HP 1 3 ⁄2 ⁄4 1 1⁄ 4 THREE PHASE Volts/60 Hz Amps 208 2.5 230 2.4 460 1.2 208 2.6 230 2.4 460 1.2 208 3.7 230 3.6 460 1.8 THREE PHASE Volts/50 Hz Amps 208 2.6 415 208 1.3 2.6 415 208 1.3 4 415 2 SINGLE PHASE Volts/60 Hz Amps 115 4.6 230 2.3 SINGLE PHASE Volts/50 Hz Amps 110 6.8 220 3.4 115 230 6.3 3.15 110 220 8.2 4.1 115 230 11.1 5.05 110 220 12.8 6.4 In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60413 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ MODEL A RED GOAT DISPOSERS ® DISPOSER APPLICATION: Medium size restaurant kitchen. Ideal for vegetable preparation, salad and pot sink areas of large kitchens. Complies with military specifications, including shipboard use. Can be used with salt water applications (specify HC option). DESIGN AND CONSTRUCTION: “A” Series Regular Design 7" Throat Size (Shown) Also available with: 4.5" Throat Size or Offset Design with 7" Throat MOTOR: “A” SERIES - BASIC DISPOSER Type REGULAR OFFSET SO60410 (04/16) • Waste chamber design permits dual directional operation when used with reversing control or switch, doubling the life cycle of the ­shattering mechanism. Regular waste chamber available with either a 41⁄2" or 7" throat size. • Tight tolerance in the cutting mechanism allows for approximately 1 ⁄8" or 3.175 mm or less of waste to pass through to sanitary. • Basic body components are cast gray iron, machined, primed and powder coated. 8" diameter rotor with (2) bolt-on reversible impact bars and sizing ring are cast ductile iron, machined, balanced and heat treated. • Bolt-on, threaded discharge flange for easy removal and ridged drain connection. Also includes flexible drain connector that slips over flange and fastens quickly to either metal or PVC drain line (2" pipe size). This allows installer options that best fit their need. • Stainless steel legs and feet, adjustable from 0" to 2". • Disposer connects to Cone or Sink Assembly by means of a neoprene isolation sleeve and (2) stainless steel clamps. • Offset Design: For maximum space utilization, disposer is also available with an 8" offset waste chamber for both Cone and Sink attachments. (Available with 7" diameter throat size only) Model No. HP PH Throat Size A112S-R4 1 1⁄ 2 1 4 1⁄ 2" A112S-R7 1 1⁄ 2 1 7" A112P-R4 1 1 ⁄2 3 4 1⁄ 2" A112P-R7 1 1⁄ 2 3 7" A2S-R4 2 1 4 1⁄ 2" A2S-R7 2 1 7" A2P-R4 2 3 4 1⁄ 2" A2P-R7 2 3 7" A3P-R4 3 3 4 1⁄ 2" A3P-R7 3 3 7" A5P-R4 5 3 4 1⁄ 2" • Reversing, heavy duty, T.E.F.C., 1725 RPM (1425 RPM, 50 Hz), full rated horsepower, double sealed, permanently lubricated ball ­bearings. • Thermal overload protection with manual reset button. • Available for single phase or three phase installations. • Available in 11⁄2 HP for light waste, 2 HP for standard use, 3 & 5 HP for heavy duty use. • Dual voltage windings allow multi-voltage operation by motor lead connection (see motor wiring diagram). 115-230V, 60Hz; 110/220V, 50 Hz, 1 Ph; 208-230/460V, 60 Hz; 208/415V, 50 Hz, 3 Ph. CONTROLS: NOTE: Electrical switches or control centers not included, must be selected as required. PLUMBING: A5P-R7 5 3 7" A112S-07 1 1⁄ 2 1 7" • 8 GPM @ 20 PSIG, 1⁄2" NPT • 2" drain line with trap • Not grease trap compliant A112P-07 1 1 ⁄2 3 7" ELECTRICAL: A2S-07 2 1 7" • Please refer to electrical requirements on page 2. A2P-07 2 3 7" OPTIONAL FEATURES: A3P-07 3 3 7" A5P-07 5 3 7" • For Hard Chrome option, add HC to the end of the disposer model number. • Adaptor Kits: Adaptor kits are available to allow installation of Red Goat Disposers to virtually any sink or cone size or configuration. Refer to “Adaptor Kit Selection Guide” for specific kit model numbers. Page 1 of 2 MODEL A RED GOAT DISPOSERS ® DISPOSER NOTE: All dimensions shown at 0" foot height adjustment. *These items are not supplied by Red Goat Disposers. HP 1 1⁄ 2 2 3 5 THREE PHASE Volts/60 Hz Amps 208 4.4 230 4.2 460 2.1 208 6 230 5.8 460 2.9 208 9.9 230 9 460 4.5 208 14.8 230 14 460 7 THREE PHASE Volts/50 Hz Amps 208 4.8 415 208 2.4 6.3 415 208 3.3 10.4 415 5.2 N/A SINGLE PHASE Volts/60 Hz Amps 115 16 230 8 115 230 17.6 8.8 SINGLE PHASE Volts/50 Hz Amps 110 15 220 7.5 110 220 N/A N/A N/A N/A 19 9.5 In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60410 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ MODEL B RED GOAT DISPOSERS ® DISPOSER APPLICATION: Heavy waste area of large kitchen. Ideal for rib, steak, or lobster houses and clam bars. DESIGN AND CONSTRUCTION: “B” Series Regular Design 7" Throat Size (Shown) Also available with: Offset Design with 7" Throat “B” SERIES - BASIC DISPOSER Type REGULAR OFFSET Model No. HP PH Throat Size B3P-R 3 3 7" B5P-R 5 3 7" B3P-O 3 3 7" B5P-O 5 3 7" • Waste chamber design permits dual directional operation when used with reversing control or switch, doubling the life cycle of the ­shattering mechanism. Regular waste chamber available with a 7" throat size. • Access to waste chamber by means of a cast aluminum lid having a 7" diameter throat opening, removable by means of quick-release head clamps. • Basic body components are cast gray iron, machined, primed and powder coated. • 105⁄8" diameter rotor/turntable with exclusive adjustable 45° angle and 6 integral impact breakers constructed of hardened ductile steel alloy for long life use. Matching 45° sizing ring with 24 grind teeth constructed of hardened ductile steel alloy. • Tight tolerance in the cuttng mechanism allows for approximately 1 ⁄8" or 3.175 mm or less of waste to pass through to sanitary. • Bolt-on, threaded discharge flange for easy removal and ridged drain connection. Also includes flexible drain connector that slips over flange and fastens quickly to either metal or PVC drain line (2" pipe size). This allows installer options that best fit their need. • Stainless steel legs and feet, adjustable from 0" to 2". • Disposer connects to Cone or Sink Assembly by means of a neoprene isolation sleeve and (2) stainless steel clamps. • Offset Design: For maximum space utilization, disposer is also available with an 8" offset waste chamber for both Cone and Sink attachments. MOTOR: • Reversing, heavy duty, O.D.P., 1725 RPM (1425 RPM, 50Hz), full rated horsepower, double sealed, permanently lubricated ball bearings. • Thermal overload protection with manual reset button (3 and 5 HP models only). • Exclusive shaft extension with 3⁄4" wrench flats to externally de-jam foreign matter without special tools. • Available in 3 & 5 HP, 3 Ph. • Dual voltage winding: 208-230/460V, 60 Hz; 208/415V, 50 Hz. CONTROLS: NOTE: Electrical switches or control centers not included, must be selected as required. PLUMBING: • (1) 3 GPM @ 20 PSIG, 1⁄2" NPT & (1) 10 GPM @ 20 PSIG, 1⁄2" NPT • 2" drain line with trap • Not grease trap compliant ELECTRICAL: • Please refer to electrical requirements on page 2. OPTIONAL FEATURES: • Adaptor Kits: Adaptor kits are available to allow installation of Red Goat Disposers to virtually any sink or cone size or configuration. Refer to “Adaptor Kit Selection Guide” for specific kit model numbers. SO60411 (04/16) Page 1 of 2 MODEL B RED GOAT DISPOSERS ® DISPOSER NOTE: All dimensions shown at 0" foot height adjustment. *These items are not supplied by Red Goat Disposers. HP 3 5 7 1⁄ 2 10 THREE PHASE Volts/60 Hz Amps 208 9.5 230 9.2 460 4.6 208 14.5 230 14 460 7.5 208 23 230 22 460 11 208 30 230 28 460 14 THREE PHASE Volts/50 Hz Amps 208 10.6 415 208 5.3 19.4 415 9.7 N/A N/A N/A N/A In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60411 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ MODEL C RED GOAT DISPOSERS ® DISPOSER APPLICATION: Central waste areas of large institutions having large quantities of the tough waste. Ideal for large food processing houses having waste such as raw steer leg knuckle bones, ribs, poultry carcasses, king crabs, lobster shells and vegetable waste. Complies with military specifications, including shipboard use. Can be used with salt water applications (specify HC option). DESIGN AND CONSTRUCTION: “C” Series Regular Design 7" Throat Size (Shown) Also available with: Offset Design with 7" Throat or High Drum • Waste chamber design permits dual directional operation when used with reversing control or switch, doubling the life cycle of the ­shattering mechanism. • Access to waste chamber by means of a cast aluminum lid having a 7" diameter throat opening, removable by means of quick-release head clamps. • Basic body components are cast gray iron, machined, primed and powder coated. 15" diameter rotor with bolt-on reversible impact bars and sizing ring are cast ductile iron, machined, balanced and heat treated. • Tight tolerance in the cuttng mechanism allows for approximately 1 ⁄8" or 3.175 mm or less of waste to pass through to sanitary. • Flexible drain connector. Fastens quickly to either metal or PVC drain line (3" pipe size). • Stainless steel legs and feet, adjustable from 0" to 2". • Disposer connects to Cone or Sink Assembly by means of a neoprene isolation sleeve and (2) stainless steel clamps. • Offset Design: For maximum space utilization, disposer is also available with an 8" offset waste chamber for both Cone and Sink attachments. MOTOR: “C” SERIES - BASIC DISPOSER Type Model No. HP PH Throat Size REGULAR C10P-R 10 3 7" OFFSET C10P-O 10 3 7" • Reversing, heavy duty, O.D.P., 1725 RPM, full rated horsepower, ­double sealed, permanently lubricated ball bearings. • Thermal overload protection (heaters) in control; must be sized as required. • Available in 10 HP, 3 Ph. • Dual voltage winding: 208-230/460V, 60 Hz CONTROLS: NOTE: Electrical switches or control centers not included, must be selected as required. PLUMBING: • (2) 10 GPM @ 20 PSIG, 1⁄2" NPT • 3" drain line with trap • Not grease trap compliant ELECTRICAL: • Please refer to electrical requirements page 2. OPTIONAL FEATURES: • For High Drum Option, add HD to the end of the disposer model ­number. • For Hard Chrome Option (includes 4 impact bars), add HC to the end of the disposer model number. • Adaptor Kits: Adaptor kits are available to allow installation of Red Goat Disposers to virtually any sink or cone size or configuration. Refer to “Adaptor Kit Selection Guide” for specific kit model numbers. SO60412 (04/16) Page 1 of 2 MODEL C RED GOAT DISPOSERS ® DISPOSER NOTE: All dimensions shown at 0" foot height adjustment. *These items are not supplied by Red Goat Disposers. HP 5 7 1⁄ 2 10 THREE PHASE Volts/60 Hz Amps 208 14.5 230 14 460 7.5 208 23 230 22 460 11 208 30 230 28 460 14 THREE PHASE Volts/50 Hz Amps 208 19.4 415 9.7 N/A N/A N/A N/A In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60412 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ MS SERIES RED GOAT DISPOSERS ® MANUAL ON/OFF SWITCH (NON-REVERSING) For “F”, & “A series disposers only. APPLICATION: • Economical non-reversing On/Off switch for use when magnetic ­contactor and overload protection are not required. DESIGN AND CONSTRUCTION: • NEMA4, watertight, cast aluminum housing and cover. Cast aluminum lever actuator with provision for lockout. WARRANTY: • One full year from date of purchase by end user, covering defects in material or workmanship; parts and labor included. Underwriters Laboratories Inc. LISTED MS SERIES MANUAL ON/OFF SWITCH (NON-REVERSING) Model No. SO60416 (04/16) MS-1 MS-2 HP Range Voltage PH 1 ⁄2 to 2 115 or 230 1 1 ⁄2 to 5 208, 230 or 460 3 Page 1 of 2 MS SERIES RED GOAT DISPOSERS ® MANUAL ON/OFF SWITCH (NON-REVERSING) SHIPPING DIMENSIONS AND WEIGHTS: Model No. MS-1 MS-2 WIDTH in. 7 7 DEPTH mm. 178 178 in. 7 7 HEIGHT mm 178 178 in. 3 3 WEIGHT mm 76 76 lbs. 4 4 kg 2 2 VOLUME cu. ft. cu. m .09 .002 .09 .002 Construction: Shall be NEMA4 watertight, cast aluminum enclosure with lever actuator and lock out provisions. Approvals and Warranty: Shall be UL (Underwriters Laboratories, Inc.) listed. Warranty shall cover parts, labor and mileage on all components for one year. *Specify HP, Voltage, and Phase when ordering. In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60416 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ MC SERIES RED GOAT DISPOSERS ® MAGNETIC STARTER (NON-REVERSING) For all Red Goat Disposers series. APPLICATION: • Provides magnetic contactor control of motor for longer switch life. DESIGN AND CONSTRUCTION: • High strength compression molded NEMA4X (watertight, corrosion resistant) enclosure. Magnetic contactor with built-in automatic reset overload relay to protect against low voltage, overloads and phase failure. Clearly marked terminal strip for easy connection of incoming power, solenoid valve. WARRANTY: • One full year from date of purchase by end user, covering defects in material or workmanship; parts and labor included. MC SERIES MAGNETIC STARTER (NON-REVERSING) Model No. HP Range Voltage PH MC-1L 1 ⁄2 to 2 115 1 MC-1H 1 ⁄2 to 2 230 1 MC-5L 1 ⁄2 to 10 230 3 MC-5H 1 ⁄2 to 10 460 3 Underwriters Laboratories Inc. LISTED SO60417 (04/16) Canadian Standards Association LISTED Page 1 of 2 MC SERIES RED GOAT DISPOSERS ® MAGNETIC STARTER (NON-REVERSING) In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60417 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ RMS SERIES RED GOAT DISPOSERS ® MANUAL REVERSING DRUM SWITCH For “F”, “A, & “B” series disposers only. (With Thermal Overloads On Motors) APPLICATION: • Provides manually operated reversing of disposer which doubles the life of impact bars and sizing ring. Use when magnetic contactor and overload protection are not required. DESIGN AND CONSTRUCTION: • NEMA4, watertight painted enclosure. Durable steel activating lever with positive stops for forward and reverse positions. WARRANTY: • One full year from date of purchase by end user, covering defects in material or workmanship; parts and labor included. Underwriters Laboratories Inc. LISTED Canadian Standards Association LISTED RMS SERIES MANUAL REVERSING DRUM SWITCH Model No. RMS-2 RMS-3 RMS-5 SO60415 (04/16) HP Range Voltage PH 1 ⁄2 to 2 HP 115 1 1 ⁄2 to 2 HP 230 1 1 ⁄2 to 2 HP 208-230/460 3 3 208-230/460 3 2 115 1 5 208-230/460 3 Page 1 of 2 RMS SERIES RED GOAT DISPOSERS ® MANUAL REVERSING DRUM SWITCH SHIPPING DIMENSIONS AND WEIGHTS: Model No. RMS-2 RMS-3 RMS-5 WIDTH in. 5 7 7 DEPTH mm. 127 178 178 in. 5 6 6 HEIGHT mm 127 152 152 in. 7 9 9 WEIGHT mm 178 229 229 lbs. 3 5 5 kg 1 2 2 VOLUME cu. ft. cu. m 0.1 .01 0.2 .01 0.2 .01 Construction: Shall be NEMA4 watertight, cast aluminum and steel enclosure with top mounted lever actuator. Approvals and Warranty: Shall be UL (Underwriters Laboratories, Inc.) listed. Warranty shall cover parts, labor and mileage on all components for one year. *Specify HP, Voltage, and Phase when ordering. In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60415 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ RAC1 & RAC2 SERIES RED GOAT DISPOSERS ® AUTOMATIC REVERSING MAGNETIC CONTROLS INCLUDES: • PF: Positive flush. • EM: The Eco-Mizer™ Electricity and Water Saver. APPLICATION: • Provides automatic reversing of motor (the motor runs in the opposite direction each time it is started) which doubles the life of the shattering mechanism. DESIGN AND CONSTRUCTION: • High strength compression molded glass fiber reinforced p­ olyester, NEMA4X (watertight, corrosion resistant) enclosure. Reversing magnetic contactors with built-in automatic reset overload relays to protect against low voltage, overloads and phase failure. Clearly marked terminal strip for easy connection of incoming power, solenoid valve and remote switch. RAC 2 DESIGN FEATURES: • Encapsulated solid state control circuit board with self-diagnostic circuitry and indicator lights. Front mounted, heavy duty Start and Stop pushbuttons. RAC2 Series features illuminated pushbuttons to indicate mode of operation, built-in clean out cycle (2 minute time delay for flushing of disposer and waste lines) and disconnect switch with heavy duty front mounted “pistol grip” handle with provision for lockout. Antiplug relay to prevent motor reversing while running or coasting. • The Eco-Mizer™ Electricity and Water Saver conserves water and electricity usage by limiting disposer run time to a preset interval. Specify 5 to 15 minutes. WARRANTY: • One full year from date of purchase by end user, covering defects in material or workmanship; parts and labor included. OPTIONAL: • RS: Remote Start/Stop switch. RAC 1 Underwriters Laboratories Inc. LISTED RAC1 & RAC2 AUTOMATIC REVERSING MAGNETIC CONTROLS Voltages Model No. RAC1 Series Model No. RAC2 Series RAC1-KP RAC2-KP 1 ⁄2, 3⁄4, 11⁄4, 11⁄2, 2, 3, 5 RAC1-BE RAC2-BE 1 ⁄2, ⁄4, 1 ⁄4, 1 ⁄2, 2, 3, 5 380-415 50 3 RAC1-SL RAC2-SL 1 ⁄ 2, 3⁄ 4, 1 1⁄ 4, 1 1⁄ 2, 2 110-120 50/60 1 RAC1-SH RAC2-SH 1 ⁄ 2, 3⁄ 4, 1 1⁄ 4, 1 1⁄ 2, 2 200-240 50/60 1 RAC1-7* RAC2-7* 7 200-240 440-480 60 3 RAC1-10* RAC2-10* 10 200-240 440-480 60 3 HP Range 3 1 1 L H 200-240/440-480 Hertz 50/60 PH 3 *Indicate voltage by adding L or H to the end of model number. SO60414 (04/16) Page 1 of 2 RAC1 & RAC2 SERIES RED GOAT DISPOSERS ® AUTOMATIC REVERSING MAGNETIC CONTROLS DIMENSIONS: TYPICAL INSTALLATION: SHIPPING DIMENSIONS AND WEIGHTS: Model No. RAC1 RAC2 WIDTH in. 12 12 DEPTH mm. 305 305 in. 14 14 HEIGHT mm 356 356 in. 11 11 WEIGHT mm 279 279 lbs. 25 28 kg 11 13 VOLUME cu. ft. cu. m 1.1 .03 1.1 .03 Construction: Shall be NEMA4X watertight, corrosion resistant, molded glass fiber reinforced polyester enclosure. Reversing magnetic contactors with overload relay to protect against low voltage, motor overload and phase failure. Front mounted heavy duty illuminated pushbuttons. Built-in front-mounted disconnect switch with heavy duty pistol grip handle with provision for lockout. Encapsulated (moisture resistant) solid state low voltage control circuit with self-diagnostic indicator lights. Antiplug relay to prevent motor reversing while running or coasting. Clean out cycle 2 minute time delay. Shall include the Eco-Mizer™ Electricity and Water Saver preset at factory to customer requirements, 5 to 15 minutes, at no additional cost. Approvals and Warranty: Shall be UL (Underwriters Laboratories, Inc.) listed. Warranty shall cover parts, labor and mileage on all components for one year. OPTIONS: (Additional Cost) MODEL RS: REMOTE START/STOP SWITCH Allows control panel to be located a distance away while Start/Stop switch can be mounted near disposer. NEMA4X enclosure. MODEL PF: POSITIVE FLUSH Leaves water running for flushing of waste chamber and drainline for two minutes after motor stops. In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60414 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ H.E. TABLE RED GOAT DISPOSERS ® HOSTILE ENVIRONMENT TABLE The Proven Performer in the most Hostile & Corrosive Environment APPLICATION: • Prewired and preplumbed disposer in portable stainless steel table to perform in Hostile and Corrosive Environments, using readily available seawater. FEATURES: • Operates on seawater to conserve valuable fresh water supply. • Automatic reversing for even wear and longer life of turntable and sizing ring. • Control panel with sealed printed circuit board. • NEMA 4X solenoid valve provides automatic water control. • Includes clean-out cycle for easy completion of disposer cycle. • Will handle 750-1000 lbs. of waste per hour...including bones. • Exclusive 1/10 year warranty - 10 years on housing, 1 year on other components. DESIGN AND CONSTRUCTION: • Extra long wearing turntable impact bars and sizing ring. Heat treated ductile iron and nickel plated. • Pallet type base for portable and easy fork lift transport. • Conveniently located, easy drain connection with hose clamps. • Recessed control panel, lighted buttons and disconnect switch housed in NEMA 4X enclosure. MOTOR: • Totally enclosed and fan cooled motor, heavy corrosion resistant epoxy painted, sealed bearings, 1.15 service factor. • Thermal overload reset located on motor. • Available in 2, 3 and 5 horsepower, three phase. • Explosion-proof motors available. Shown with optional full enclosure stainless panels HOSTILE ENVIRONMENT TABLE SO60418 (04/16) Model No. HP Voltage PH Throat Size A2P-THEL 2 208-230 3 7" A2P-THEH 2 460 3 7" A3P-THEL 3 208-230 3 7" A3P-THEH 3 460 3 7" A5P-THEL 5 208-230 3 7" A5P-THEH 5 460 3 7" Page 1 of 2 H.E. TABLE RED GOAT DISPOSERS ® HOSTILE ENVIRONMENT TABLE EQUIPMENT DIMENSIONS: HOSTILE ENVIRONMENT TABLE SPECIFICATIONS: Processing Method Food Waste Disposer Design Type Stand Alone, Portable Design Input Capacity (lbs.) 750 - 1,000 lbs./hr. Dimension (W x D x H in.) 225⁄8 x 285⁄8 x 375⁄16 Weight 2 HP 355 lbs., 3 HP 385 lbs., 5 HP 400 lbs. Material Stainless Steel (type 316L) Safety Feature Manual Overload Reset on Motor, Disconnect Handle Lockout on Control Automated Control Automatic Reversing Control Panel with Clean-Out Cycle Installation 3 Phase Power, 2" Drain Line, 1⁄2" NPT Water Connection ELECTRICAL DATA: HP 2 3 5 OPTIONAL FULL ENCLOSURE STAINLESS PANELS: Volts Amps 208 6.5 Part No. Weight 230 6.2 40-HE-014 30 lbs. 460 3.1 208 9 230 8.6 460 4.3 208 14.8 230 14 460 7 Includes Left and Right Side Panel In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. Page 2 of 2 RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com SO60418 (04/16) Project:______________________________________________ Item No.___________________________________________ Quantity___________________ CORRECTIONAL FACILITY RED GOAT DISPOSERS ® DISPOSERS CORRECTIONAL FACILITY DISPOSERS “A” Series “B” Series Model No. PH HP Throat Size A112S-07CP 1 1 ⁄2 1 7" A112P-07CP 1 1⁄ 2 3 7" A2S-07CP 2 1 7" A2P-07CP 2 3 7" A3P-07CP 3 3 7" A5P07CP 5 3 7" B3P-0CP 3 3 7" B5P-0CP 5 3 7" C10P-0CP 10 3 7" “C” Series DISPOSER: • Includes all standard features of the disposer series specified with all fasteners tamperproof. CORRECTIONAL FACILITY SINK RING OR CONE Sink Assembly No. Cone Assembly No. & Size A-RSA7CP SINK RING OR CONE: B-RSACP • Has a stainless steel, perforated restrictor plate permanently welded into throat opening. Included with the sink or cone mounting assemblies are: solenoid valve, flow control valve, vacuum breaker and vinyl silver trap scrapping ring. C-RSACP A-C712CP 12" Dia. A-C715CP 15" Dia. A-C718CP 18" Dia. B-C12CP 12" Dia. B-C15CP 15" Dia. B-C18CP 18" Dia. C-C12CP 12" Dia. C-C15CP 15" Dia. C-C18CP 18" Dia. CORRECTION FACILITY CONTROLS RAC2 Series (Shown) Voltages Model No. RAC1 Series Model No. RAC2 Series RAC1-KP RAC2-KP 1 ⁄2, 3⁄4, 11⁄4, 11⁄2, 2, 3, 5 200-240/440-480 50/60 3 RAC1-BE RAC2-BE 1 ⁄2, 3⁄4, 11⁄4, 11⁄2, 2, 3, 5 380-415 50 3 ⁄ 2, ⁄ 4, 1 ⁄ 4, 1 ⁄ 2, 2 110-120 50/60 1 ⁄ 2, 3⁄ 4, 1 1⁄ 4, 1 1⁄ 2, 2 200-240 50/60 1 HP Range L H Hertz PH RAC1-SL RAC2-SL 1 RAC1-SH RAC2-SH 1 RAC1-7* RAC2-7* 7 200-240 440-480 60 3 RAC1-10* RAC2-10* 10 200-240 440-480 60 3 3 1 1 *Indicate voltage by adding L or H to end of model number CONTROL: OPTIONAL: • Includes all standard features of the control model specified with provision for lockout. • CP: Correctional Package • RS: Remote Start/Stop switch. INCLUDES: • PF: Positive flush. • EM: The Eco-Mizer™ Electricity and Water Saver. In line with its policy to continually improve its products, Red Goat reserves the right to change materials and specifications without notice. SO60419 (04/16) RED GOAT DISPOSERS, a division of Illinois Tool Works, Inc. 165 Independence Court, Lancaster, PA 17601 Phone: 800-237-6628  Fax: 717-397-1997  Website: redgoat.com Page 1 of 1 RED GOAT DISPOSERS ® RED GOAT DISPOSERS 165 Independence Court, Lancaster, PA 17601 800-237-6628 ext. 181  •  Fax: 717-397-1997 www.redgoat.com SO60408 (02-16)