Transcript
R
Outdoor Single-Port PoE Extender
PT-PEX-01G-OT
Introduction PT-PEX-01G-OT is a single-port PoE extender with lightning protection special designed for outdoor using. It provides 55VDC, 30W power for remote PD, with 8-line signals and PoE output 6KV (10/700us) surge protection. The work temperature is -40℃-65℃ with metal casing, and support 10/100/1000Mbps. It provides power for IEEE802.3af/at terminal high-power equip -ment,such as wireless AP, network camera and VoIP phone.
1
2
3
1. Install Hole 2. Install Hole 3. PoE Output Port
Key features - Metal casing, waterproof, dustproof: IP67 - Extend distance: 100 meters - Output power: 30W - PoE Pins：4/5(+),7/8(-) or 3/6(+),1/2(-) - Sealing gasket past extension,bearing,corrosion,aging test - Easy install with install hole, need not to open equipment - Does not require local power - Wide temperature design:-40℃-65℃
PT-PEX-01G-OT works well outdoor during input voltage 44 -57VDC,and needn't require local power and is powered via the PoE input.It connects to network equipment through Cat5e cable.The effe -ctive distance is 100 meters,and can work longer to 400 meters with adding to 4 PoE extenders to suit any complex environment.
4
4. Install Hole 5. Install Hole 6. PoE Input Port
Outline drawing Unit:mm
5
6
Beijing Creative Lianjie Network Technology Co., Ltd.
http://www.cxlj.com.cn
Specification Standards - IEEE802.3 10Base-T Ethernet - IEEE802.3u 100Base-Tx Fast Ethernet - IEEE802.3ab 1000Base-T Gigabit Ethernet - RoHS Compliant - WEEE Compliant,CE/FCC - FCC Part 15,Class B - EN 55022 Class B - MTBF:100,000h.@25℃
Dimensions & Weight - Dimensions：188.6mm X 124.86mm X 74mm - Weight：0.8kg
Physical interface - PoE input: RJ45口(with waterproof jacket) - PoE output: RJ45口(with waterproof jacket)
Environmental conditions PoE power input and output
- Operating Ambient Temperature:-40℃to 65℃ - Operating Height:-304.8 meter to 3048 meters - Operating Humidity:Maximum 90％,Non-condensing
- Port number: 1 - Extend distance: 100 meters - PoE pins: 4/5(+),7/8(-) or 3/6(+),1/2(-) - Data rates: 10/100/1000Mbps - Output voltage: 55V - Output current: 550mA - Input DC voltage: 44-57VDC
- Protected Lines: 1,2,3,4,5,6,7,8 - Common-mode sugrge protection(10/700us): 6KV - Clamp voltage(1,2;3,6;4,5;7,8): 7.5VDC
Working functional picture
订购信息
PT-PEX-01G-OT PT-POT-MBK-S
产品包装
PT-PEX-01G-OT x 1 Product manual x 1
Network signal surge protection
PoE power input & output surge protection - Different-mode suige protection(10/700us):6KV - Power clamp voltage(4,5-7,8):60VDC
55VDC/30W/1000M/IP67/4/5(+),7/8(-) or 3/6(+),1/2(-) Outdoor installation kit
This document belongs to PROCET comany.Without written permission, it is not allow any publication, upload, post, delivery or public use.It is also PROCET policy to improve its products as new technology, components, software,and firmware at any time,PROCET, therefore, reserves the right to change specifications without prior notice.
