Transcript
Overview This Bluetooth wireless headset designs with fashion elements and new wireless technology; its mini size and contraption are completely in conformity with the fashion life demand.No matter where you are, on the road, in the office, or driving the car, as long as you carrying it , you can always keep in touch. Uses DSP technology, is completely contraption and fashion. It can provide you with a clear and melodious timbre effect, and you can enjoy wireless phone without interference in anytime and anywhere. Technical Parameters Bluetooth version: V4.1 Bluetooth mode: Hands free/Headset/AV/AV RCP profile Radio frequency: 2.4GHz Transmission power: Class2 The transmission range: 12 meters The charger power supply: AC input DC output 5V 110-240V Music time: about 3H Talk time: about 4H Standby time: about 120H Operation Method STARTING UP: Press the power button for 7-10 seconds, Bluetooth headset can starling up and into search, then the indicator light will turn into the blue and red light alternating flashing quickly. ATTENTION 1 .When the Bluetooth headset just starting up, the blue light can flicker twice, now keep on press the power button. 2.After starling up, Connection must be executed in 2 minutes, if not must be restart. STANDBY After starting up, without any operation in two minutes, Bluetooth headset will turn to standby.At this time, the Bluetooth headset cannot be searched. Shutdown Press the power button for 7-10 seconds, the red and blue light flicker twice, then the light black out for shutdown state. Indicator Light and Sounds Prompt 1.The red and blue light alternating flashing quickly means the Bluetooth headset is in a standby and search state. 2.When the earphone warns tick sound three times, it means low power. 3.The red light is always on means charging state, the red light will black out or turns to blue after fully charged.The socket of Headset is for charging battery or inserts the earphone hole with the same type of connector.
Single Bluetooth headset pairing step 1 . Making sure the headset is in off state. 2. Press the power button for 7 seconds till the red and blue light is alternating flashing quickly. 3. According to the mobile module, then turn on the Bluetooth headset and set it into standby-search state ( the red and blue light flashes alternately), then connect with the Bluetooth headset and the phone. Dual Mode Pair 1:Long press the main button of the two earphones at the same time. Until indicator light alternatively flash red and blue. It is ready to pair. Wait for 3-7 seconds. 2:Turn on Bluetooth function of your phone to search the device. 3:You will find "T6", click it to finish pairing.
Important notes 1 .Primitive pairing password of the Bluetooth headset is 0000 2.When the indicating blue light flashes three times and then the red light flashes once time every seven seconds, it means docking successfully. Standby-search state for duration of 2 minutes, if paring with mobile phone is failed in 2 minutes, the Bluetooth headset will turn to the blue light and flash slowly for standby power-saving state, if you still need to search, please press the power button for 5 seconds to restart the equipment and repeat steps above
