Transcript
Owner’s Manual USB 3.0 to Dual SATA Dock/Cloning Station Model: U339-002 Package Contents
2
Product Features
2
System Requirements
3
Docking Station Instructions
3
Offline Cloning Instructions
4
Online Cloning Instructions
5
Warranty & Warranty Registration
10
PROTECT YOUR INVESTMENT! Register your product for quicker service and ultimate peace of mind. You could also win an ISOBAR6ULTRA surge protector—a $50 value!
14-02-169 93-32DB.indd 1
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support Copyright © 2014 Tripp Lite. All rights reserved.
3/4/2014 1:58:05 PM
Package Contents • U339-002 USB 3.0 to Dual SATA Hard Drive Dock/Cloning Station • 4-ft. USB 3.0 Device Cable • External Power Supply (Input: 100-240V, 50/60Hz, 1.2A; Output: 12V, 4A) • FNet CloneDrive Software CD • Owner’s Manual
Product Features • Dual SATA docking station enables the connection of two 2.5” or 3.5” hard drives via a computer’s USB port. • Easy set-up eliminates the need for time-consuming internal installation and facilitates access to a hard drive’s contents. • Offline cloning functionality allows hard drive duplication with the touch of a button – a host computer connection is not needed. • An LED progress bar displays cloning status. • Included FNet CloneDrive software allows for hard drive duplication via a connected Windows® computer for added flexibility. • Supports USB 3.0 connections with data transfer rates up to 5Gbps. • Backward compatible with USB 2.0 and USB 1.1 standards.
14-02-169 93-32DB.indd 2
2
3/4/2014 1:58:05 PM
System Requirements • (x2) 2.5” or 3.5” SATA Hard Drive. • Computer with an available USB port. Note: A USB 3.0 port is required to achieve maximum transfer speeds up to 5Gbps. Cloning functionality does not require the U339-002 to be connected to a computer. • Docking functionality compatible with Windows, Mac® and Linux® systems. • Online cloning software compatible with Windows only. • Offline cloning copies data from the master drive to the slave drive, leaving the remaining data unallocated. Windows computers will be able to reallocate the remaining data, whereas Mac and Linux computers will not.
Docking Station Instructions Note: If your SATA Hard Drive has not been formatted yet, you will first need to format it using your computer’s Disk Management utility in order to copy and access files. 1
Connect the external power supply to the U339-002 docking station. Then, plug the external power supply into a Tripp Lite Surge Protector, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS) (additional Tripp Lite items sold separately).
2
Insert your 2.5” or 3.5” SATA Hard Drive into one of the docking station’s available bays. When inserting the SATA Hard Drive, make sure that it is securely seated on the SATA connector. Repeat this step to connect an additional hard drive.
3
Connect the included USB 3.0 cable to your computer and the docking station.
4
Turn on the power to the docking station using the switch on the back of the unit. The green POWER LED will illuminate to indicate that power is being received. The blue “A” and “B” DISK LEDs indicate that a hard drive is connected to its respective port. The blue DISK LED will blink while the connected computer recognizes the hard drive, and then turn solid once the hard drive is available for use. 3
14-02-169 93-32DB.indd 3
3/4/2014 1:58:05 PM
Offline Cloning Instructions Note: • If your SATA Hard Drive has not been formatted yet, you will first need to format it using your computer’s Disk Management utility before proceeding with cloning. • The Slave Drive’s (“B” bay) capacity must be equal to or larger than the Master Drive’s (“A” bay) capacity. A manufacturer’s stated hard drive capacity is not always the same as its actual hard drive capacity, so it is important to first reference your hard drive’s actual capacity before attempting the cloning process. • Prior to cloning, make sure there is no important data stored on the Slave Drive. Once cloning begins, all data on the Slave Drive will be deleted and replaced with the cloned data from the Master Drive. • Offline cloning copies data from the Master Drive to the Slave Drive, leaving the remaining data unallocated. Windows computers will be able to reallocate the remaining data, whereas Mac and Linux computers will not. 1
Connect the included external power supply to the U339-002 docking station. Then, plug the external power supply into a Tripp Lite Surge Protector, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS) (additional Tripp Lite items sold separately).
2
Insert the 2.5” or 3.5” SATA Master Hard Drive (the drive that you want to clone) into the docking station’s “A” bay.
3
Insert the 2.5” or 3.5” SATA Slave Hard Drive (the drive that the cloned data will be copied to) into the docking station’s “B” bay.
4
Turn on the power to the docking station using the switch on the back of the unit. The green POWER LED will illuminate to indicate that power is being received. The blue DISK LEDs indicate that a hard drive is connected to its corresponding port and ready for cloning.
14-02-169 93-32DB.indd 4
4
3/4/2014 1:58:05 PM
Offline Cloning Instructions 5
Press and hold the CLONE button for approximately 3 seconds. When the blue 100% LED in the progress bar illuminates, release the CLONE button.
6
While the blue 100% LED is still illuminated, press and release the CLONE button again. The blue 25% LED in the progress bar will blink to indicate that cloning is taking place. The progress bar LEDs will then display a solid blue light next to one of the four corresponding percentages to indicate the cloning completion status.
7
When all of the progress bar’s LEDs are illuminated solid blue, the cloning process is complete.
Online Cloning Instructions Note: • If your SATA hard drive has not been formatted yet, you will first need to format it using your computer’s Disk Management utility before proceeding with cloning. • The Slave Drive’s (“B” bay) capacity must be equal to or larger than the Master Drive’s (“A” bay) capacity. A manufacturer’s stated hard drive capacity is not always the same as its actual hard drive capacity, so it is important to first reference your hard drive’s actual capacity before attempting the cloning process. • Prior to cloning, make sure there is no important data stored on the Slave Drive. Once cloning begins, all data on the Slave Drive will be deleted and replaced with the cloned data from the Master Drive. • Prior to cloning, the FNet CloneDrive software must be installed on your computer. Insert the FNet CloneDrive software CD provided with the U339-002 docking station into your computer’s CD- or DVDROM drive. Then open the .exe file on your computer and follow the prompts to complete installation. When asked to enter a serial number, use the serial number provided on the FNet CloneDrive’s CD insert cover.
14-02-169 93-32DB.indd 5
5
3/4/2014 1:58:05 PM
Online Cloning Instructions 1
Connect the external power supply to the U339-002 docking station. Then, plug the external power supply into a Tripp Lite Surge Protector, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS) (additional Tripp Lite items sold separately).
2
Insert the 2.5” or 3.5” SATA Master Hard Drive (the drive that you want to clone) into the docking station’s “A” bay.
3
Insert the 2.5” or 3.5” SATA Slave Hard Drive (the drive that the cloned data will be copied to) into the docking station’s “B” bay.
4
Connect the included USB 3.0 cable between your computer and the docking station.
5
Turn on the power to the docking station using the switch on the back of the unit. The green POWER LED will illuminate to indicate that power is being received. The blue “A” and “B” DISK LEDs indicate that a hard drive is connected to its respective port. The blue DISK LED will blink while the connected computer recognizes the hard drive, and then turn solid once the hard drive is available for use.
6
Double-click on the FNet CloneDrive icon in the lower-right corner of your screen or on the desktop shortcut icon.
14-02-169 93-32DB.indd 6
6
3/4/2014 1:58:05 PM
Online Cloning Instructions 7
A screen appears that displays the drives plugged into the docking station’s “A” and “B” bays. Click the Start button to begin the cloning process.
8
A prompt will appear to confirm that you wish to begin the cloning process. Click Start to continue.
14-02-169 93-32DB.indd 7
7
3/4/2014 1:58:05 PM
Online Cloning Instructions 9
The cloning process will now begin. A progress bar at the bottom of the screen tracks the cloning progress.
10
When cloning is complete, click on the OK button.
14-02-169 93-32DB.indd 8
8
3/4/2014 1:58:06 PM
Online Cloning Instructions 11
The contents of the Master Drive have successfully been copied over to the Slave Drive. Note: Any extra space remaining on your Slave Drive will automatically be set aside as unallocated. To use the remaining Slave Drive space, you will need to format the unallocated area into another partition using your computer’s Disk Management utility.
14-02-169 93-32DB.indd 9
9
3/4/2014 1:58:07 PM
Warranty & Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way. EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise. FCC Notice, Class B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.
14-02-169 93-32DB.indd 10
10
3/4/2014 1:58:07 PM
Warranty & Warranty Registration WARRANTY REGISTRATION Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) • Send the new equipment back for recycling when this ultimately becomes waste WARNING Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide. Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.
14-02-169 93-32DB.indd 11
11
3/4/2014 1:58:07 PM
14-02-169 93-32DB.indd 12
1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support 14-02-169 • 93-32DB_RevB
3/4/2014 1:58:07 PM
